Skip to content

O
OpenXG-RAN
Commit 1a80de79 authored by thomasl's avatar thomasl
Browse files
Options

trunk alignment with 0.3 branch 

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@6875 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent e0b90b9c
Show whitespace changes
Inline Side-by-side
Showing with 1898 additions and 839 deletions
cmake_targets/CMakeLists.txt
View file @ 1a80de79
......@@ -23,7 +23,7 @@
# OpenAirInterface Dev : openair4g-devel@eurecom.fr
#
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
# Author: laurent THOMAS
# Author: laurent THOMAS, Lionel GAUTIER
###############################################################################
cmake_minimum_required (VERSION 2.8)
......@@ -45,6 +45,16 @@ project (OpenAirInterface)
###########################################
# macros to define options as there is numerous options in oai
################################################
macro(add_option name val helpstr)
if(DEFINED ${name})
set(value ${${name}})
else(DEFINED ${name})
set(value ${val})
endif()
set(${name} ${value} CACHE STRING "${helpstr}")
add_definitions("-D${name}=${value}")
endmacro(add_option)
macro(add_boolean_option name val helpstr)
if(DEFINED ${name})
set(value ${${name}})
......@@ -204,7 +214,9 @@ add_list2_option(RRC_ASN1_VERSION "Rel10" "ASN.1 version of RRC interface" "Rel8
if (${RRC_ASN1_VERSION} STREQUAL "Rel8")
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1c/ASN1_files/EUTRA-RRC-Definitions-86.asn)
elseif (${RRC_ASN1_VERSION} STREQUAL "Rel10")
elseif (${RRC_ASN1_VERSION} STREQUAL "CBA")
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1c/ASN1_files/EUTRA-RRC-Definitions-a20-lola.asn)
else()
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1c/ASN1_files/EUTRA-RRC-Definitions-a20.asn)
endif (${RRC_ASN1_VERSION} STREQUAL "Rel8")
......@@ -335,76 +347,159 @@ endif (${RF_BOARD} STREQUAL "EXMIMO")
include_directories ("${OPENAIR_TARGETS}/ARCH/COMMON")
####################
# to be documented options
###################
add_boolean_option(ADDR_CONF False "specific to oaisim")
##############################################################
# ???!!! TO BE DOCUMENTED OPTIONS !!!???
##############################################################
add_boolean_option(ASSERT True "???")
add_boolean_option(ENABLE_SECURITY True "Enable LTE integrity and ciphering between RRC UE and eNB")
add_boolean_option(ENABLE_USE_MME True "eNB connected to MME (INTERFACE S1-C), not standalone eNB")
add_boolean_option(NO_RRM True "DO WE HAVE A RADIO RESSOURCE MANAGER: NO")
add_boolean_option(USER_MODE True "????")
add_boolean_option(OAI_NW_DRIVER_TYPE_ETHERNET False "????")
add_boolean_option(DISABLE_USE_NAS False "???")
add_boolean_option(DRIVER2013 True "????")
add_boolean_option(ENABLE_FXP True "????")
add_boolean_option(ENABLE_NAS_UE_LOGGING True "????")
add_boolean_option(ENABLE_NEW_MULTICAST False "specific to oaisim")
add_boolean_option(ENABLE_PDCP_NETLINK_FIFO False "????")
add_boolean_option(ENABLE_PGM_TRANSPORT False "specific to oaisim")
add_boolean_option(ENABLE_RAL False "????")
add_boolean_option(ENABLE_SECURITY True "???")
add_boolean_option(ENABLE_STANDALONE_EPC True "Compile MME, SGW and PGW in a single executable")
add_boolean_option(ENABLE_USE_CPU_EXECUTION_TIME True "Add data in vcd traces: disable it if perf issues")
add_boolean_option(ENABLE_USE_GTPU_IN_KERNEL True "as per name")
add_boolean_option(ENABLE_USE_MME True "???")
add_boolean_option(ENABLE_USE_NETFILTER_FOR_SGI False "SGI option")
add_boolean_option(ENABLE_USE_PCAP_FOR_SGI False "SGI option")
add_boolean_option(ENABLE_USE_RAW_SOCKET_FOR_SGI False "As per name")
add_boolean_option(ENABLE_VCD_FIFO True "Seems legacy: always true now")
add_boolean_option(ENB_MODE True "???")
add_boolean_option(EPC_BUILD False "???")
add_boolean_option(HARD_RT False "???")
add_boolean_option(JUMBO_FRAME True "???")
add_boolean_option(LARGE_SCALE False "specific to oaisim: defines max eNB=2 and max UE=120")
add_boolean_option(LINK_PDCP_TO_GTPV1U True "????")
add_boolean_option(LINUX_LIST False "???")
add_boolean_option(LINUX True "???")
add_boolean_option(LOCALIZATION False "???")
add_boolean_option(LOG_NO_THREAD True "Disable thread for log, seems always set to true")
add_boolean_option(LINK_PDCP_TO_GTPV1U False "????")
add_boolean_option(LOWLATENCY True "Use the Linux scheduler SCHED_DEADLINE: kernel >= 3.14")
add_boolean_option(MAC_CONTEXT True "specific to oaisim")
add_integer_option(MAX_NUM_CCs 1 "????")
add_boolean_option(MIH_C_MEDIEVAL_EXTENSIONS True "????")
add_boolean_option(MU_RECEIVER False "????")
add_boolean_option(NAS_ADDRESS_FIX False "specific to oaisim: for nasmesh driver")
add_boolean_option(NAS_MME False "NAS_UE and NAS_MME are incompatible options")
add_boolean_option(NAS_NETLINK False "???? Must be True to compile nasmesh driver without rtai")
add_boolean_option(NAS_UE True "NAS_UE and NAS_MME are incompatible options")
add_boolean_option(NEW_FFT True "????")
add_boolean_option(NO_RRM True "????")
add_boolean_option(OAI_EMU False "specific to oaisim")
add_boolean_option(OAISIM False "specific to oaisim")
add_boolean_option(OAI_NW_DRIVER_TYPE_ETHERNET False "????")
add_boolean_option(OAI_NW_DRIVER_USE_NETLINK True "????")
add_boolean_option(OPENAIR1 True "????")
add_boolean_option(OPENAIR2 True "????")
add_boolean_option(UE_BUILD False "????")
add_boolean_option(USE_MME False "this flag is used only one time in lte-softmodem.c")
add_list_string_option(PACKAGE_NAME "NotDefined" "As per attribute name")
########################
# Include order
##########################
add_boolean_option(ENB_MODE True "Swap the include directories between openair2 and openair-cn" )
##########################
# Emulation options
##########################
add_boolean_option(ENABLE_PGM_TRANSPORT False "specific to oaisim, emulation through ethernet, reliable multicast")
add_boolean_option(ADDR_CONF False "specific to oaisim, IP autoconf of user-plane IP interface")
add_boolean_option(OPENAIR_EMU False "specific to oaisim")
add_boolean_option(OAI_EMU False "specific to oaisim")
add_boolean_option(PHY_ABSTRACTION False "specific to oaisim")
##########################
# SCHEDULING/REAL-TIME/PERF options
##########################
add_boolean_option(ENABLE_USE_CPU_EXECUTION_TIME True "Add data in vcd traces: disable it if perf issues")
add_boolean_option(ENABLE_VCD_FIFO True "Seems legacy: always true now, time measurements of proc calls and var displays")
add_boolean_option(HARD_RT False "???")
add_boolean_option(LINUX False "used in weird memcpy() in pdcp.c ???")
add_boolean_option(LINUX_LIST False "used only in lists.c: either use OAI implementation of lists or Linux one (should be True, but it is False")
add_boolean_option(LOG_NO_THREAD True "Disable thread for log, seems always set to true")
add_boolean_option(OPENAIR_LTE True "Seems legacy: keep it to true")
##########################
# PHY options
##########################
add_boolean_option(DRIVER2013 True "????")
add_boolean_option(ENABLE_FXP True "????")
add_boolean_option(ENABLE_NEW_MULTICAST False "specific to oaisim")
add_boolean_option(LARGE_SCALE False "specific to oaisim: defines max eNB=2 and max UE=120")
add_boolean_option(LOCALIZATION False "???")
add_integer_option(MAX_NUM_CCs 1 "????")
add_boolean_option(MU_RECEIVER False "????")
add_boolean_option(NEW_FFT True "????")
add_boolean_option(OPENAIR1 True "????")
add_boolean_option(PBS_SIM False "????")
add_boolean_option(PC_DSP True "????")
add_boolean_option(PC_TARGET True "????")
add_boolean_option(PERFECT_CE False "????")
add_boolean_option(PHY_ABSTRACTION False "specific to oaisim")
add_boolean_option(PHYSIM True "for L1 simulators (dlsim, ulsim, ...)")
add_boolean_option(PHY_CONTEXT True "not clear: must remain False for dlsim")
add_boolean_option(PHY_EMUL False "not clear: must remain False for dlsim")
add_boolean_option(PHYSIM True "??? set in lte-softmodem, for L1 simulators dlsim, ulsim, ...?")
add_boolean_option(PUCCH True "????")
add_boolean_option(RANDOM_BF False "????")
add_boolean_option(RLC_STOP_ON_LOST_PDU False "Fatal assert in this case")
add_boolean_option(SECU False "???")
add_boolean_option(SMBV False "Rohde&Schwarz SMBV100A vector signal generator")
add_boolean_option(SPECTRA False "???")
add_boolean_option(UE_BUILD True "????")
##########################
# 802.21 options
##########################
add_boolean_option(ENABLE_RAL False "ENABLE 802.21 INTERFACE")
add_boolean_option(USE_3GPP_ADDR_AS_LINK_ADDR False "As per attribute name")
add_boolean_option(USE_MME False "this flag is used only one time in lte-softmodem.c")
add_boolean_option(USER_MODE True "????")
add_list_string_option(PACKAGE_NAME "NotDefined" "As per attribute name")
##########################
# NAS LAYER OPTIONS
##########################
add_boolean_option(ENABLE_NAS_UE_LOGGING True "????")
add_boolean_option(NAS_BUILT_IN_EPC False "MME NAS layer not present in this executable")
add_boolean_option(NAS_BUILT_IN_UE True "UE NAS layer present in this executable")
add_boolean_option(NAS_UE True "NAS UE INSTANCE (<> NAS_MME)")
add_boolean_option(NAS_MME False "NAS_UE and NAS_MME are incompatible options")
##########################
# ACCESS STRATUM LAYER2 OPTIONS
##########################
add_boolean_option(MAC_CONTEXT True "specific to oaisim")
add_boolean_option(JUMBO_FRAME True "ENABLE LARGE SDU in ACCESS STRATUM (larger than common MTU)")
##########################
# RLC LAYER OPTIONS
##########################
add_boolean_option(OPENAIR2 True "Access Stratum layer 2 built in executable")
add_boolean_option(TRACE_RLC_PAYLOAD False "Fatal assert in this case")
add_boolean_option(RLC_STOP_ON_LOST_PDU False "Fatal assert in this case")
add_boolean_option(TRACE_RLC_AM_BO False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_FREE_SDU False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_HOLE False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_PDU False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_RESEGMENT False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_RX False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_RX_DECODE False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_TX False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_TX_STATUS False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_AM_STATUS_CREATION False "TRACE for RLC AM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(STOP_ON_IP_TRAFFIC_OVERLOAD False "")
add_boolean_option(TRACE_RLC_UM_DAR False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_UM_DISPLAY_ASCII_DATA False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_UM_PDU False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_UM_RX False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_UM_SEGMENT False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
add_boolean_option(TRACE_RLC_UM_TX_STATUS False "TRACE for RLC UM, TO BE CHANGED IN A MORE GENERAL FLAG")
##########################
# PDCP LAYER OPTIONS
##########################
add_boolean_option(PDCP_USE_NETLINK False "For eNB, PDCP communicate with a NETLINK socket if connected to network driver, else could use a RT-FIFO")
add_boolean_option(PDCP_USE_NETLINK_QUEUES False "When PDCP_USE_NETLINK is true, incoming IP packets are stored in queues")
add_boolean_option(LINK_ENB_PDCP_TO_IP_DRIVER False "For eNB, PDCP communicate with a IP driver")
add_boolean_option(LINK_ENB_PDCP_TO_GTPV1U True "For eNB, PDCP communicate with GTP-U protocol (eNB<->S-GW)")
##########################
# RRC LAYER OPTIONS
##########################
add_boolean_option(RRC_DEFAULT_RAB_IS_AM False "Otherwise it is UM, configure params are actually set in rrc_eNB.c:rrc_eNB_generate_defaultRRCConnectionReconfiguration(...)")
##########################
# S1AP LAYER OPTIONS
##########################
add_boolean_option(S1AP_LIMIT_STREAM_ID_TO_1 True "FIXME: Despite Eurecom has implemented the spec concerning management of stream ids, there are always issues with other EPCs than EURECOM")
##########################
# PROJECTS (IST, FRENCH COLL., etc)
# SPECIFIC OPTIONS
##########################
add_boolean_option(SPECTRA False "???")
add_boolean_option(MIH_C_MEDIEVAL_EXTENSIONS True "EXTENSIONS TO MIH 802.21 IN CONTEXT OF IST PROJECT CALLED MEDIEVAL")
add_boolean_option(EMOS False "????")
if(${EMOS})
......@@ -712,6 +807,7 @@ set(L2_SRC
${RRC_DIR}/rrc_UE.c
${RRC_DIR}/rrc_eNB.c
${RRC_DIR}/rrc_eNB_S1AP.c
${RRC_DIR}/rrc_eNB_UE_context.c
${RRC_DIR}/rrc_common.c
${RRC_DIR}/L2_interface.c
)
......@@ -1291,7 +1387,6 @@ include_directories(${CRYPTO_INCLUDE_DIRS})
if (${RF_BOARD} STREQUAL "USRP")
find_package(Boost REQUIRED)
include_directories(${LIBBOOST_INCLUDE_DIR})
target_link_libraries (lte-softmodem ${LIBBOOST_LIBRARIES})
endif (${RF_BOARD} STREQUAL "USRP")
pkg_search_module(OPENPGM openpgm-5.1)
......@@ -1368,10 +1463,11 @@ target_link_libraries (lte-softmodem
-Wl,--end-group )
target_link_libraries (lte-softmodem ${LIBXML2_LIBRARIES})
target_link_libraries (lte-softmodem pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp ${option_USRP} ${XFORMS_LIBRARIES} )
target_link_libraries (lte-softmodem ${LIBBOOST_LIBRARIES})
# EPC is ??? nodes implementation in one process
################################
add_executable(oai_epc
add_executable(mme_gw
${OPENAIR_BIN_DIR}/messages_xml.h
${OPENAIRCN_DIR}/OAI_EPC/oai_epc_log.c
${OPENAIRCN_DIR}/OAI_EPC/oai_epc.c
......@@ -1379,13 +1475,35 @@ add_executable(oai_epc
${OPENAIRCN_DIR}/SCTP/sctp_primitives_server.c
${OPENAIRCN_DIR}/NAS/nas_main.c
)
target_link_libraries (oai_epc
target_link_libraries (mme_gw
-Wl,--start-group
NAS S1AP_LIB S1AP_EPC GTPV1U GTPV2C SCTP_SERVER UDP_SERVER SECU_CN SECU_OSA SGI S6A SGW MME_APP LFDS ${ITTI_LIB} CN_UTILS HASHTABLE
-Wl,--end-group
pthread m sctp rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES} fdproto fdcore
)
# Default parameters
site_name(SITE_HSS_HOSTNAME)
site_name(SITE_MME_HOSTNAME)
add_option(MME_HOSTNAME ${SITE_MME_HOSTNAME} "HSS Fully qualified domain name")
add_option(HSS_HOSTNAME ${SITE_HSS_HOSTNAME} "HSS Fully qualified domain name")
add_option(HSS_IP 127.0.1.1 "HSS IP address, default is local")
add_option(REALM openair4G.eur "Realm TODO: extract this default value from SITE_MME_FQDN")
add_option(MME_FQDN ${SITE_MME_HOSTNAME}.${REALM} "MME Fully qualified domain name")
add_option(HSS_FQDN ${SITE_HSS_HOSTNAME}.${REALM} "HSS Fully qualified domain name")
add_option(TRANSPORT_option No_SCTP "No_TCP or No_SCTP")
add_option(TRANSPORT_PREFER_TCP_option Prefer_TCP "Prefer_TCP or null string ")
configure_file(
${OPENAIRCN_DIR}/UTILS/CONF/s6a.conf.in
${CMAKE_CURRENT_BINARY_DIR}/epc_s6a.conf)
configure_file(
${OPENAIR_TARGETS}/PROJECTS/GENERIC-LTE-EPC/CONF/epc.local.enb.conf.in
${CMAKE_CURRENT_BINARY_DIR}/epc.local.enb.conf)
configure_file(
${OPENAIR_TARGETS}/PROJECTS/GENERIC-LTE-EPC/CONF/epc.conf.in
${CMAKE_CURRENT_BINARY_DIR}/epc.conf)
# oai_sgw is SGW node implementation
################################
add_executable(oai_sgw
......@@ -1402,17 +1520,17 @@ target_link_libraries (oai_sgw
# USIM process
#################
add_executable(usim_data
add_executable(usim
${OPENAIRCN_DIR}/NAS/EURECOM-NAS/tools/usim_data.c
)
target_link_libraries (usim_data ${NAS_LIB} UTIL ${ITTI_LIB} LFDS pthread rt nettle crypto m)
target_link_libraries (usim ${NAS_LIB} UTIL ${ITTI_LIB} LFDS pthread rt nettle crypto m)
# ???
#####################
add_executable(ue_data
add_executable(nvram
${OPENAIRCN_DIR}/NAS/EURECOM-NAS/tools/ue_data.c
)
target_link_libraries (ue_data ${NAS_LIB} UTIL ${ITTI_LIB} LFDS pthread rt nettle crypto m)
target_link_libraries (nvram ${NAS_LIB} UTIL ${ITTI_LIB} LFDS pthread rt nettle crypto m)
###################################"
# Addexecutables for tests
......@@ -1472,8 +1590,6 @@ foreach(myExe s1ap
secu_kenb
aes128_ctr_encrypt
aes128_ctr_decrypt
secu
secu_knas_stream_int
secu_knas_encrypt_eea2
secu_knas secu_knas_encrypt_eea1
kdf
......@@ -1497,12 +1613,16 @@ endforeach(myExe)
# ???
###########################
add_executable(oaisim_mme
${OPENAIR_BIN_DIR}/messages_xml.h
${OPENAIRCN_DIR}/OAISIM_MME/oai_mme_log.c
${OPENAIRCN_DIR}/OAISIM_MME/oaisim_mme.c
${OPENAIRCN_DIR}/NAS/nas_main.c
)
target_link_libraries (oaisim_mme
${ITTI_LIB} ${NAS_LIB} S1AP_LIB S1AP_ENB
S11 S6A UTILS UDP MME_APP SECU_CN LFDS fdproto fdcore
-Wl,--start-group
NAS S1AP_LIB S1AP_EPC GTPV1U GTPV2C SCTP_SERVER UDP_SERVER SECU_CN SECU_OSA SGI S6A S11 SGW MME_APP LFDS ${ITTI_LIB} CN_UTILS HASHTABLE
-Wl,--end-group
pthread m sctp rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES} fdproto fdcore
)
##################################################
......
cmake_targets/autotests/run_compilation_autotests.bash
View file @ 1a80de79
#!/bin/bash
if [ -s $OPENAIR_DIR/cmake_targets/build_helper.bash ] ; then
source $OPENAIR_DIR/cmake_targets/build_helper.bash
if [ -s $OPENAIR_DIR/cmake_targets/tools/build_helper.bash ] ; then
source $OPENAIR_DIR/cmake_targets/tools/build_helper.bash
else
echo "Error: no file in the file tree: is OPENAIR_DIR variable set?"
exit 1
fi
test_compile() {
mkdir -p $tdir/$1/build
cd $tdir/$1/build
{
cmake ..
rm -f $3
make -j4 $2
} > $tdir/log/$1.txt 2>&1
if [ -s $3 ] ; then
cp $3 $tdir/bin/$3.$1
echo_success "$1 test compiled"
else
echo_error "$1 test compilation failed"
fi
}
tdir=$OPENAIR_DIR/cmake_targets/autotests
mkdir -p $tdir/bin $tdir/log
......@@ -15,71 +31,49 @@ if [ "$updated" != "" ] ; then
echo_warning "some files are not in svn: $updated"
fi
compilations \
autotests/test.0101 oaisim \
oaisim $tdir/bin/oaisim.r8 \
$tdir/log/test0101.txt \
"test 0101:oaisim Rel8 passed" \
"test 0101:oaisim Rel8 failed"
compilations \
autotests/test.0102 oaisim \
oaisim $tdir/bin/oaisim.r8.nas \
$tdir/log/test0102.oaisim.txt \
"test 0102:oaisim Rel8 nas passed" \
"test 0102:oaisim Rel8 nas failed"
compilations \
autotests/test.0103 oaisim \
oaisim $tdir/bin/oaisim.r8.rf \
$tdir/log/test0103.txt \
"test 0103:oaisim rel8 rf passed" \
"test 0103:oaisim rel8 rf failed"
compilations \
autotests/test.0104 dlsim \
dlsim $tdir/bin/dlsim \
$tdir/log/test0104.txt \
"test 0104:dlsim passed" \
"test 0104:dlsim failed"
compilations \
autotests/test.0104 ulsim \
ulsim $tdir/bin/ulsim \
$tdir/log/test0105.txt \
"test 0105: ulsim passed" \
"test 0105: ulsim failed"
compilations \
autotests/test.0106 oaisim \
oaisim $tdir/bin/oaisim.r8.itti \
$tdir/log/test0106.txt \
"test 0103:oaisim rel8 itti passed" \
"test 0103:oaisim rel8 itti failed"
compilations \
autotests/test.0107 oaisim \
oaisim $tdir/bin/oaisim.r10 \
$tdir/log/test0107.txt \
"test 0103:oaisim rel10 passed" \
"test 0103:oaisim rel10 failed"
compilations \
autotests/test.0108 oaisim \
oaisim $tdir/bin/oaisim.r10.itti \
$tdir/log/test0108.txt \
"test 0108:oaisim rel10 itti passed" \
"test 0108:oaisim rel10 itti failed"
compilations \
autotests/test.0114 oaisim \
oaisim $tdir/bin/oaisim.r8.itti.ral \
$tdir/log/test0114.txt \
"test 0114:oaisim rel8 itti ral passed" \
"test 0114:oaisim rel8 itti ral failed"
compilations \
autotests/test.0115 oaisim \
oaisim $tdir/bin/oaisim.r10.itti.ral \
$tdir/log/test0115.txt \
"test 0114:oaisim rel10 itti ral passed" \
"test 0114:oaisim rel10 itti ral failed"
compilations \
autotests/test.0102 nasmesh \
CMakeFiles/nasmesh/nasmesh.ko $tdir/bin/nasmesh.ko \
$tdir/log/test0120.txt \
"test 0120: nasmesh.ko passed" \
"test 0120: nasmesk.ko failed"
cd $tdir
test_compile \
test.0101 oaisim \
oaisim $tdir/bin/oaisim.r8
test_compile \
test.0102 oaisim \
oaisim $tdir/bin/oaisim.r8.nas
test_compile \
test.0103 lte-softmodem \
lte-softmodem $tdir/bin/lte-softmodem.r8.rf
test_compile \
test.0104 dlsim \
dlsim $tdir/bin/dlsim
test_compile \
test.0104 ulsim \
ulsim $tdir/bin/ulsim
test_compile \
test.0106 oaisim \
oaisim $tdir/bin/oaisim.r8.itti
test_compile \
test.0107 oaisim \
oaisim $tdir/bin/oaisim.r10
test_compile \
test.0108 oaisim \
oaisim $tdir/bin/oaisim.r10.itti
test_compile \
test.0114 oaisim \
oaisim $tdir/bin/oaisim.r8.itti.ral
test_compile \
test.0115 oaisim \
oaisim $tdir/bin/oaisim.r10.itti.ral
test_compile \
test.0120 nasmesh \
CMakeFiles/nasmesh/nasmesh.ko $tdir/bin/nasmesh.ko
cmake_targets/autotests/run_exec_autotests.bash
View file @ 1a80de79
#!/bin/bash
if [ -s $OPENAIR_DIR/cmake_targets/build_helper.bash ] ; then
source $OPENAIR_DIR/cmake_targets/build_helper.bash
if [ -s $OPENAIR_DIR/cmake_targets/tools/build_helper.bash ] ; then
source $OPENAIR_DIR/cmake_targets/tools/build_helper.bash
else
echo "Error: no file in the file tree: is OPENAIR_DIR variable set?"
exit 1
......
cmake_targets/autotests/test.0101/CMakeLists.txt
View file @ 1a80de79
cmake_minimum_required(VERSION 2.8)
set(ADDR_CONF False)
set(ASSERT True)
set(DEBUG_OMG False)
set(DISABLE_XER_PRINT False)
set(DRIVER2013 False)
set(ENABLE_FXP True)
set(ENABLE_ITTI False)
set(ENABLE_NAS_UE_LOGGING False)
set(ENABLE_NEW_MULTICAST True)
set(ENABLE_PDCP_NETLINK_FIFO False)
set(ENABLE_PGM_TRANSPORT True)
set(ENABLE_RAL False)
set(ENABLE_SECURITY False)
set(ENABLE_USE_CPU_EXECUTION_TIME True)
set(ENABLE_USE_MME False)
set(ENABLE_VCD_FIFO True)
set(HARD_RT False)
set(JUMBO_FRAME True)
set(LARGE_SCALE False)
set(LINK_PDCP_TO_GTPV1U False)
set(LINUX_LIST False)
set(LINUX True)
set(LOCALIZATION False)
set(LOG_NO_THREAD True)
set(LOWLATENCY False)
set(MAC_CONTEXT 1)
set(MAX_NUM_CCs 1)
set(MIH_C_MEDIEVAL_EXTENSIONS True)
set(MSG_PRINT False)
set(MU_RECEIVER False)
set(NAS_ADDRESS_FIX true)
set(NAS_NETLINK True)
set(NAS_UE True)
set(NEW_FFT True)
set(NO_RRM True)
set(OAI_EMU True)
set(OAI_EMU True)
set(OAI_NW_DRIVER_TYPE_ETHERNET False)
set(OPENAIR1 False)
set(OPENAIR2 True)
set(OPENAIR_EMU True)
set(OPENAIR_LTE True)
set (PACKAGE_NAME "oaisim")
set(PACKAGE_NAME "oaisim")
set(PBS_SIM False)
set(PC_DSP False)
set(PC_TARGET False)
set(PDCP_MSG_PRINT False)
set(PERFECT_CE False)
set(PHY_ABSTRACTION True)
set(PHY_ABSTRACTION True)
set(PHY_EMUL False)
set(PHYSIM False)
set(PUCCH True)
set(RANDOM_BF False)
set(RF_BOARD "NoBoard")
set(RLC_STOP_ON_LOST_PDU False)
set(RRC_ASN1_VERSION False)
set(RRC_ASN1_VERSION "Rel8")
set(RRC_MSG_PRINT False)
set(RTAI False)
set(SECU False)
set(SMBV False)
set(SPECTRA False)
set(TEST_OMG False)
set(UE_BUILD False)
set(USE_3GPP_ADDR_AS_LINK_ADDR False)
set(USE_MME False)
set(USER_MODE True)
set(XER_PRINT True)
set(XFORMS False)
set ( ADDR_CONF False )
set ( ASSERT True )
set ( DEBUG_OMG False )
set ( DISABLE_USE_NAS False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 False )
set ( EMOS False )
set ( ENABLE_FXP True )
set ( ENABLE_ITTI False )
set ( ENABLE_NAS_UE_LOGGING False )
set ( ENABLE_NEW_MULTICAST True )
set ( ENABLE_PDCP_NETLINK_FIFO False )
set ( ENABLE_PGM_TRANSPORT True )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY False )
set ( ENABLE_STANDALONE_EPC False )
set ( ENABLE_USE_CPU_EXECUTION_TIME True )
set ( ENABLE_USE_GTPU_IN_KERNEL False )
set ( ENABLE_USE_MME False )
set ( ENABLE_USE_NETFILTER_FOR_SGI False )
set ( ENABLE_USE_PCAP_FOR_SGI False )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI False )
set ( ENABLE_VCD_FIFO True )
set ( ENB_MODE True )
set ( EPC_BUILD False )
set ( HARD_RT False )
set ( JUMBO_FRAME True )
set ( LARGE_SCALE False )
set ( LINK_ENB_PDCP_TO_GTPV1U False )
set ( LINK_ENB_PDCP_TO_IP_DRIVER False )
set ( LINK_PDCP_TO_GTPV1U False )
set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD True )
set ( LOWLATENCY False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MIH_C_MEDIEVAL_EXTENSIONS True )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX False )
set ( NAS_BUILT_IN_EPC False )
set ( NAS_BUILT_IN_UE False )
set ( NAS_MME False )
set ( NAS_NETLINK False )
set ( NAS_UE False )
set ( NB_ANTENNAS_RX 2 )
set ( NB_ANTENNAS_TX 2 )
set ( NB_ANTENNAS_TXRX 2 )
set ( NEW_FFT True )
set ( NO_RRM True )
set ( OAI_EMU True )
set ( OAI_NW_DRIVER_TYPE_ETHERNET False )
set ( OAI_NW_DRIVER_USE_NETLINK False )
set ( OAISIM True )
set ( OPENAIR1 False )
set ( OPENAIR2 True )
set ( OPENAIR_EMU False )
set ( OPENAIR_LTE True )
set ( PBS_SIM False )
set ( PC_DSP False )
set ( PC_TARGET False )
set ( PDCP_MSG_PRINT False )
set ( PDCP_USE_NETLINK False )
set ( PDCP_USE_NETLINK_QUEUES False )
set ( PERFECT_CE False )
set ( PHY_ABSTRACTION True )
set ( PHY_CONTEXT 1 )
set ( PHY_EMUL False )
set ( PHYSIM False )
set ( PUCCH True )
set ( RANDOM_BF False )
set ( RF_BOARD False )
set ( RLC_STOP_ON_LOST_PDU False )
set ( RRC_ASN1_VERSION Rel8 )
set ( RRC_DEFAULT_RAB_IS_AM False )
set ( RRC_MSG_PRINT False )
set ( RTAI False )
set ( S1AP_LIMIT_STREAM_ID_TO_1 False )
set ( S1AP_VERSION R10 )
set ( SMBV False )
set ( SPECTRA False )
set ( STOP_ON_IP_TRAFFIC_OVERLOAD False )
set ( TEST_OMG False )
set ( TRACE_RLC_AM_BO False )
set ( TRACE_RLC_AM_FREE_SDU False )
set ( TRACE_RLC_AM_HOLE False )
set ( TRACE_RLC_AM_PDU True )
set ( TRACE_RLC_AM_RESEGMENT False )
set ( TRACE_RLC_AM_RX_DECODE False )
set ( TRACE_RLC_AM_RX False )
set ( TRACE_RLC_AM_STATUS_CREATION False )
set ( TRACE_RLC_AM_TX False )
set ( TRACE_RLC_AM_TX_STATUS False )
set ( TRACE_RLC_PAYLOAD False )
set ( TRACE_RLC_UM_DAR False )
set ( TRACE_RLC_UM_DISPLAY_ASCII_DATA False )
set ( TRACE_RLC_UM_PDU True )
set ( TRACE_RLC_UM_RX False )
set ( TRACE_RLC_UM_SEGMENT False )
set ( TRACE_RLC_UM_TX_STATUS False )
set ( UE_BUILD False )
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME False )
set ( USER_MODE True )
set ( XER_PRINT True )
set ( XFORMS False )
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/test.0102/CMakeLists.txt
View file @ 1a80de79
cmake_minimum_required(VERSION 2.8)
set(ADDR_CONF False)
set(ASSERT True)
set(DEBUG_OMG False)
set(DISABLE_XER_PRINT False)
set(DRIVER2013 False)
set(ENABLE_FXP True)
set(ENABLE_ITTI False)
set(ENABLE_NAS_UE_LOGGING False)
set(ENABLE_NEW_MULTICAST True)
set(ENABLE_PDCP_NETLINK_FIFO True)
set(ENABLE_PGM_TRANSPORT True)
set(ENABLE_RAL False)
set(ENABLE_SECURITY False)
set(ENABLE_USE_CPU_EXECUTION_TIME True)
set(ENABLE_USE_MME False)
set(ENABLE_VCD_FIFO True)
set(HARD_RT False)
set(JUMBO_FRAME True)
set(LARGE_SCALE False)
set(LINK_PDCP_TO_GTPV1U False)
set(LINUX_LIST False)
set(LINUX True)
set(LOCALIZATION False)
set(LOG_NO_THREAD True)
set(LOWLATENCY False)
set(MAC_CONTEXT 1)
set(MAX_NUM_CCs 1)
set(MIH_C_MEDIEVAL_EXTENSIONS True)
set(MSG_PRINT False)
set(MU_RECEIVER False)
set(NAS_ADDRESS_FIX true)
set(NAS_NETLINK True)
set(NAS_UE True)
set(NEW_FFT True)
set(NO_RRM True)
set(OAI_EMU True)
set(OAI_EMU True)
set(OAI_NW_DRIVER_TYPE_ETHERNET False)
set(OPENAIR1 False)
set(OPENAIR2 True)
set(OPENAIR_EMU True)
set(OPENAIR_LTE True)
set (PACKAGE_NAME "oaisim")
set(PACKAGE_NAME "oaisim")
set(PBS_SIM False)
set(PC_DSP False)
set(PC_TARGET False)
set(PDCP_MSG_PRINT False)
set(PERFECT_CE False)
set(PHY_ABSTRACTION True)
set(PHY_ABSTRACTION True)
set(PHY_EMUL False)
set(PHYSIM False)
set(PUCCH True)
set(RANDOM_BF False)
set(RF_BOARD "NoBoard")
set(RLC_STOP_ON_LOST_PDU False)
set(RRC_ASN1_VERSION False)
set(RRC_ASN1_VERSION "Rel8")
set(RRC_MSG_PRINT False)
set(RTAI False)
set(SECU False)
set(SMBV False)
set(SPECTRA False)
set(TEST_OMG False)
set(UE_BUILD False)
set(USE_3GPP_ADDR_AS_LINK_ADDR False)
set(USE_MME False)
set(USER_MODE True)
set(XER_PRINT True)
set(XFORMS False)
set ( ADDR_CONF False )
set ( ASSERT True )
set ( DEBUG_OMG False )
set ( DISABLE_USE_NAS False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 False )
set ( EMOS False )
set ( ENABLE_FXP True )
set ( ENABLE_ITTI False )
set ( ENABLE_NAS_UE_LOGGING False )
set ( ENABLE_NEW_MULTICAST True )
set ( ENABLE_PDCP_NETLINK_FIFO False )
set ( ENABLE_PGM_TRANSPORT True )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY False )
set ( ENABLE_STANDALONE_EPC False )
set ( ENABLE_USE_CPU_EXECUTION_TIME True )
set ( ENABLE_USE_GTPU_IN_KERNEL False )
set ( ENABLE_USE_MME False )
set ( ENABLE_USE_NETFILTER_FOR_SGI False )
set ( ENABLE_USE_PCAP_FOR_SGI False )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI False )
set ( ENABLE_VCD_FIFO True )
set ( ENB_MODE True )
set ( EPC_BUILD False )
set ( HARD_RT False )
set ( JUMBO_FRAME True )
set ( LARGE_SCALE False )
set ( LINK_ENB_PDCP_TO_GTPV1U False )
set ( LINK_ENB_PDCP_TO_IP_DRIVER False )
set ( LINK_PDCP_TO_GTPV1U False )
set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD True )
set ( LOWLATENCY False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MIH_C_MEDIEVAL_EXTENSIONS True )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX False )
set ( NAS_BUILT_IN_EPC False )
set ( NAS_BUILT_IN_UE False )
set ( NAS_MME False )
set ( NAS_NETLINK False )
set ( NAS_UE False )
set ( NB_ANTENNAS_RX 2 )
set ( NB_ANTENNAS_TX 2 )
set ( NB_ANTENNAS_TXRX 2 )
set ( NEW_FFT True )
set ( NO_RRM True )
set ( OAI_EMU True )
set ( OAI_NW_DRIVER_TYPE_ETHERNET False )
set ( OAI_NW_DRIVER_USE_NETLINK False )
set ( OAISIM True )
set ( OPENAIR1 False )
set ( OPENAIR2 True )
set ( OPENAIR_EMU False )
set ( OPENAIR_LTE True )
set ( PBS_SIM False )
set ( PC_DSP False )
set ( PC_TARGET False )
set ( PDCP_MSG_PRINT False )
set ( PDCP_USE_NETLINK_QUEUES False )
set ( PDCP_USE_NETLINK True )
set ( PERFECT_CE False )
set ( PHY_ABSTRACTION True )
set ( PHY_CONTEXT 1 )
set ( PHY_EMUL False )
set ( PHYSIM False )
set ( PUCCH True )
set ( RANDOM_BF False )
set ( RF_BOARD False )
set ( RLC_STOP_ON_LOST_PDU False )
set ( RRC_ASN1_VERSION Rel8 )
set ( RRC_DEFAULT_RAB_IS_AM False )
set ( RRC_MSG_PRINT False )
set ( RTAI False )
set ( S1AP_LIMIT_STREAM_ID_TO_1 False )
set ( S1AP_VERSION R10 )
set ( SMBV False )
set ( SPECTRA False )
set ( STOP_ON_IP_TRAFFIC_OVERLOAD False )
set ( TEST_OMG False )
set ( TRACE_RLC_AM_BO False )
set ( TRACE_RLC_AM_FREE_SDU False )
set ( TRACE_RLC_AM_HOLE False )
set ( TRACE_RLC_AM_PDU True )
set ( TRACE_RLC_AM_RESEGMENT False )
set ( TRACE_RLC_AM_RX_DECODE False )
set ( TRACE_RLC_AM_RX False )
set ( TRACE_RLC_AM_STATUS_CREATION False )
set ( TRACE_RLC_AM_TX False )
set ( TRACE_RLC_AM_TX_STATUS False )
set ( TRACE_RLC_PAYLOAD False )
set ( TRACE_RLC_UM_DAR False )
set ( TRACE_RLC_UM_DISPLAY_ASCII_DATA False )
set ( TRACE_RLC_UM_PDU True )
set ( TRACE_RLC_UM_RX False )
set ( TRACE_RLC_UM_SEGMENT False )
set ( TRACE_RLC_UM_TX_STATUS False )
set ( UE_BUILD False )
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME False )
set ( USER_MODE True )
set ( XER_PRINT True )
set ( XFORMS False )
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/test.0103/CMakeLists.txt
View file @ 1a80de79
cmake_minimum_required(VERSION 2.8)
set(ADDR_CONF False)
set(ASSERT False)
set(DEBUG_OMG False)
set(DISABLE_XER_PRINT False)
set(DRIVER2013 True)
set(ENABLE_FXP True)
set(ENABLE_ITTI False)
set(ENABLE_NAS_UE_LOGGING False)
set(ENABLE_NEW_MULTICAST False)
set(ENABLE_PDCP_NETLINK_FIFO False)
set(ENABLE_PGM_TRANSPORT False)
set(ENABLE_RAL False)
set(ENABLE_SECURITY False)
set(ENABLE_USE_CPU_EXECUTION_TIME True)
set(ENABLE_USE_MME False)
set(ENABLE_VCD_FIFO True)
set(HARD_RT False)
set(JUMBO_FRAME True)
set(LARGE_SCALE False)
set(LINK_PDCP_TO_GTPV1U False)
set(LINUX_LIST False)
set(LINUX True)
set(LOCALIZATION False)
set(LOG_NO_THREAD True)
set(LOWLATENCY True)
set(MAC_CONTEXT 1)
set(MAX_NUM_CCs 1)
set(MIH_C_MEDIEVAL_EXTENSIONS False)
set(MSG_PRINT False)
set(MU_RECEIVER False)
set(NAS_ADDRESS_FIX False)
set(NAS_NETLINK False)
set(NAS_UE False)
set(NEW_FFT True)
set(NO_RRM True)
set(OAI_EMU False)
set(OAI_NW_DRIVER_TYPE_ETHERNET False)
set(OPENAIR1 True)
set(OPENAIR2 True)
set(OPENAIR_EMU False)
set(OPENAIR_LTE True)
set(PACKAGE_NAME "oaisim")
set(PBS_SIM False)
set(PC_DSP True)
set(PC_TARGET True)
set(PDCP_MSG_PRINT False)
set(PERFECT_CE False)
set(PHY_ABSTRACTION False)
set(PHY_CONTEXT False)
set(PHY_EMUL False)
set(PHYSIM True)
set(PUCCH True)
set(RANDOM_BF False)
set(RF_BOARD "EXMIMO")
set(RLC_STOP_ON_LOST_PDU False)
set(RRC_ASN1_VERSION Rel8)
set(RRC_MSG_PRINT False)
set(RTAI False)
set(SECU False)
set(SMBV False)
set(SPECTRA False)
set(TEST_OMG False)
set(UE_BUILD False)
set(USE_3GPP_ADDR_AS_LINK_ADDR False)
set(USE_MME False)
set(USER_MODE True)
set(XER_PRINT True)
set(XFORMS False)
set ( ADDR_CONF False )
set ( ASSERT True )
set ( DEBUG_OMG False )
set ( DISABLE_USE_NAS False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 True )
set ( EMOS False )
set ( ENABLE_FXP True )
set ( ENABLE_ITTI False )
set ( ENABLE_NAS_UE_LOGGING False )
set ( ENABLE_NEW_MULTICAST False )
set ( ENABLE_PDCP_NETLINK_FIFO False )
set ( ENABLE_PGM_TRANSPORT False )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY False )
set ( ENABLE_STANDALONE_EPC False )
set ( ENABLE_USE_CPU_EXECUTION_TIME True )
set ( ENABLE_USE_GTPU_IN_KERNEL False )
set ( ENABLE_USE_MME False )
set ( ENABLE_USE_NETFILTER_FOR_SGI False )
set ( ENABLE_USE_PCAP_FOR_SGI False )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI False )
set ( ENABLE_VCD_FIFO True )
set ( ENB_MODE True )
set ( EPC_BUILD False )
set ( HARD_RT False )
set ( JUMBO_FRAME True )
set ( LARGE_SCALE False )
set ( LINK_ENB_PDCP_TO_GTPV1U False )
set ( LINK_ENB_PDCP_TO_IP_DRIVER False )
set ( LINK_PDCP_TO_GTPV1U False )
set ( LINUX False )
set ( LINUX_LIST False )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD True )
set ( LOWLATENCY False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MIH_C_MEDIEVAL_EXTENSIONS True )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX False )
set ( NAS_BUILT_IN_EPC False )
set ( NAS_BUILT_IN_UE False )
set ( NAS_MME False )
set ( NAS_NETLINK False )
set ( NAS_UE False )
set ( NB_ANTENNAS_RX 2 )
set ( NB_ANTENNAS_TX 2 )
set ( NB_ANTENNAS_TXRX 2 )
set ( NEW_FFT True )
set ( NO_RRM True )
set ( OAI_EMU False )
set ( OAI_NW_DRIVER_TYPE_ETHERNET False )
set ( OAI_NW_DRIVER_USE_NETLINK False )
set ( OAISIM False )
set ( OPENAIR1 True )
set ( OPENAIR2 True )
set ( OPENAIR_EMU False )
set ( OPENAIR_LTE True )
set ( PBS_SIM False )
set ( PC_DSP True )
set ( PC_TARGET True )
set ( PDCP_MSG_PRINT False )
set ( PDCP_USE_NETLINK False )
set ( PDCP_USE_NETLINK_QUEUES False )
set ( PERFECT_CE False )
set ( PHY_ABSTRACTION False )
set ( PHY_CONTEXT 1 )
set ( PHY_EMUL False )
set ( PHYSIM True )
set ( PUCCH True )
set ( RANDOM_BF False )
set ( RF_BOARD EXMIMO )
set ( RLC_STOP_ON_LOST_PDU False )
set ( RRC_ASN1_VERSION Rel8 )
set ( RRC_DEFAULT_RAB_IS_AM False )
set ( RRC_MSG_PRINT False )
set ( RTAI False )
set ( S1AP_LIMIT_STREAM_ID_TO_1 False )
set ( S1AP_VERSION R10 )
set ( SMBV False )
set ( SPECTRA False )
set ( STOP_ON_IP_TRAFFIC_OVERLOAD False )
set ( TEST_OMG False )
set ( TRACE_RLC_AM_BO False )
set ( TRACE_RLC_AM_FREE_SDU False )
set ( TRACE_RLC_AM_HOLE False )
set ( TRACE_RLC_AM_PDU False )
set ( TRACE_RLC_AM_RESEGMENT False )
set ( TRACE_RLC_AM_RX_DECODE False )
set ( TRACE_RLC_AM_RX False )
set ( TRACE_RLC_AM_STATUS_CREATION False )
set ( TRACE_RLC_AM_TX False )
set ( TRACE_RLC_AM_TX_STATUS False )
set ( TRACE_RLC_PAYLOAD False )
set ( TRACE_RLC_UM_DAR False )
set ( TRACE_RLC_UM_DISPLAY_ASCII_DATA False )
set ( TRACE_RLC_UM_PDU False )
set ( TRACE_RLC_UM_RX False )
set ( TRACE_RLC_UM_SEGMENT False )
set ( TRACE_RLC_UM_TX_STATUS False )
set ( UE_BUILD False )
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME False )
set ( USER_MODE True )
set ( XER_PRINT False )
set ( XFORMS False )
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/test.0106/CMakeLists.txt
View file @ 1a80de79
......@@ -57,7 +57,7 @@ set(PUCCH True)
set(RANDOM_BF False)
set(RF_BOARD "NoBoard")
set(RLC_STOP_ON_LOST_PDU False)
set(RRC_ASN1_VERSION False)
set(RRC_ASN1_VERSION Rel8)
set(RRC_ASN1_VERSION "Rel8")
set(RRC_MSG_PRINT False)
set(RTAI False)
......
cmake_targets/autotests/test.0107/CMakeLists.txt
View file @ 1a80de79
cmake_minimum_required(VERSION 2.8)
set(ADDR_CONF False)
set(ASSERT True)
set(DEBUG_OMG False)
set(DISABLE_XER_PRINT False)
set(DRIVER2013 False)
set(ENABLE_FXP True)
set(ENABLE_ITTI False)
set(ENABLE_NAS_UE_LOGGING False)
set(ENABLE_NEW_MULTICAST True)
set(ENABLE_PDCP_NETLINK_FIFO False)
set(ENABLE_PGM_TRANSPORT True)
set(ENABLE_RAL False)
set(ENABLE_SECURITY False)
set(ENABLE_USE_CPU_EXECUTION_TIME True)
set(ENABLE_USE_MME False)
set(ENABLE_VCD_FIFO True)
set(HARD_RT False)
set(JUMBO_FRAME True)
set(LARGE_SCALE False)
set(LINK_PDCP_TO_GTPV1U False)
set(LINUX_LIST False)
set(LINUX True)
set(LOCALIZATION False)
set(LOG_NO_THREAD True)
set(LOWLATENCY False)
set(MAC_CONTEXT 1)
set(MAX_NUM_CCs 1)
set(MIH_C_MEDIEVAL_EXTENSIONS True)
set(MSG_PRINT False)
set(MU_RECEIVER False)
set(NAS_ADDRESS_FIX true)
set(NAS_NETLINK True)
set(NAS_UE True)
set(NEW_FFT True)
set(NO_RRM True)
set(OAI_EMU True)
set(OAI_EMU True)
set(OAI_NW_DRIVER_TYPE_ETHERNET False)
set(OPENAIR1 False)
set(OPENAIR2 True)
set(OPENAIR_EMU True)
set(OPENAIR_LTE True)
set (PACKAGE_NAME "oaisim")
set(PACKAGE_NAME "oaisim")
set(PBS_SIM False)
set(PC_DSP False)
set(PC_TARGET False)
set(PDCP_MSG_PRINT False)
set(PERFECT_CE False)
set(PHY_ABSTRACTION True)
set(PHY_ABSTRACTION True)
set(PHY_EMUL False)
set(PHYSIM False)
set(PUCCH True)
set(RANDOM_BF False)
set(RF_BOARD "NoBoard")
set(RLC_STOP_ON_LOST_PDU True)
set(RRC_ASN1_VERSION False)
set(RRC_ASN1_VERSION "Rel10")
set(RRC_MSG_PRINT False)
set(RTAI False)
set(SECU False)
set(SMBV False)
set(SPECTRA False)
set(TEST_OMG False)
set(UE_BUILD False)
set(USE_3GPP_ADDR_AS_LINK_ADDR False)
set(USE_MME False)
set(USER_MODE True)
set(XER_PRINT True)
set(XFORMS False)
set ( ADDR_CONF False )
set ( ASSERT True )
set ( DEBUG_OMG False )
set ( DISABLE_USE_NAS False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 False )
set ( EMOS False )
set ( ENABLE_FXP True )
set ( ENABLE_ITTI False )
set ( ENABLE_NAS_UE_LOGGING False )
set ( ENABLE_NEW_MULTICAST True )
set ( ENABLE_PDCP_NETLINK_FIFO False )
set ( ENABLE_PGM_TRANSPORT True )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY False )
set ( ENABLE_STANDALONE_EPC False )
set ( ENABLE_USE_CPU_EXECUTION_TIME True )
set ( ENABLE_USE_GTPU_IN_KERNEL False )
set ( ENABLE_USE_MME False )
set ( ENABLE_USE_NETFILTER_FOR_SGI False )
set ( ENABLE_USE_PCAP_FOR_SGI False )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI False )
set ( ENABLE_VCD_FIFO True )
set ( ENB_MODE True )
set ( EPC_BUILD False )
set ( HARD_RT False )
set ( JUMBO_FRAME True )
set ( LARGE_SCALE False )
set ( LINK_ENB_PDCP_TO_GTPV1U False )
set ( LINK_ENB_PDCP_TO_IP_DRIVER False )
set ( LINK_PDCP_TO_GTPV1U False )
set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD True )
set ( LOWLATENCY False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MIH_C_MEDIEVAL_EXTENSIONS True )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX False )
set ( NAS_BUILT_IN_EPC False )
set ( NAS_BUILT_IN_UE False )
set ( NAS_MME False )
set ( NAS_NETLINK False )
set ( NAS_UE False )
set ( NB_ANTENNAS_RX 2 )
set ( NB_ANTENNAS_TX 2 )
set ( NB_ANTENNAS_TXRX 2 )
set ( NEW_FFT True )
set ( NO_RRM True )
set ( OAI_EMU True )
set ( OAI_NW_DRIVER_TYPE_ETHERNET False )
set ( OAI_NW_DRIVER_USE_NETLINK False )
set ( OAISIM True )
set ( OPENAIR1 False )
set ( OPENAIR2 True )
set ( OPENAIR_EMU False )
set ( OPENAIR_LTE True )
set ( PBS_SIM False )
set ( PC_DSP False )
set ( PC_TARGET False )
set ( PDCP_MSG_PRINT False )
set ( PDCP_USE_NETLINK False )
set ( PDCP_USE_NETLINK_QUEUES False )
set ( PERFECT_CE False )
set ( PHY_ABSTRACTION True )
set ( PHY_CONTEXT 1 )
set ( PHY_EMUL False )
set ( PHYSIM False )
set ( PUCCH True )
set ( RANDOM_BF False )
set ( RF_BOARD False )
set ( RLC_STOP_ON_LOST_PDU True )
set ( RRC_ASN1_VERSION Rel10 )
set ( RRC_DEFAULT_RAB_IS_AM False )
set ( RRC_MSG_PRINT False )
set ( RTAI False )
set ( S1AP_LIMIT_STREAM_ID_TO_1 False )
set ( S1AP_VERSION R10 )
set ( SMBV False )
set ( SPECTRA False )
set ( STOP_ON_IP_TRAFFIC_OVERLOAD False )
set ( TEST_OMG False )
set ( TRACE_RLC_AM_BO False )
set ( TRACE_RLC_AM_FREE_SDU False )
set ( TRACE_RLC_AM_HOLE False )
set ( TRACE_RLC_AM_PDU True )
set ( TRACE_RLC_AM_RESEGMENT False )
set ( TRACE_RLC_AM_RX_DECODE False )
set ( TRACE_RLC_AM_RX False )
set ( TRACE_RLC_AM_STATUS_CREATION False )
set ( TRACE_RLC_AM_TX False )
set ( TRACE_RLC_AM_TX_STATUS False )
set ( TRACE_RLC_PAYLOAD False )
set ( TRACE_RLC_UM_DAR False )
set ( TRACE_RLC_UM_DISPLAY_ASCII_DATA False )
set ( TRACE_RLC_UM_PDU True )
set ( TRACE_RLC_UM_RX False )
set ( TRACE_RLC_UM_SEGMENT False )
set ( TRACE_RLC_UM_TX_STATUS False )
set ( UE_BUILD False )
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME False )
set ( USER_MODE True )
set ( XER_PRINT True )
set ( XFORMS False )
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/test.0108/CMakeLists.txt
View file @ 1a80de79
......@@ -57,7 +57,7 @@ set(PUCCH True)
set(RANDOM_BF False)
set(RF_BOARD "NoBoard")
set(RLC_STOP_ON_LOST_PDU True)
set(RRC_ASN1_VERSION False)
set(RRC_ASN1_VERSION Rel10)
set(RRC_ASN1_VERSION "Rel10")
set(RRC_MSG_PRINT False)
set(RTAI False)
......
cmake_targets/autotests/test.0114/CMakeLists.txt
View file @ 1a80de79
......@@ -57,7 +57,7 @@ set(PUCCH True)
set(RANDOM_BF False)
set(RF_BOARD "NoBoard")
set(RLC_STOP_ON_LOST_PDU True)
set(RRC_ASN1_VERSION False)
set(RRC_ASN1_VERSION Rel8)
set(RRC_ASN1_VERSION "Rel8")
set(RRC_MSG_PRINT False)
set(RTAI False)
......
cmake_targets/autotests/test.0115/CMakeLists.txt
View file @ 1a80de79
cmake_minimum_required(VERSION 2.8)
set(ADDR_CONF False)
set(ASSERT True)
set(DEBUG_OMG False)
set(DISABLE_XER_PRINT False)
set(DRIVER2013 False)
set(ENABLE_FXP True)
set(ENABLE_ITTI True)
set(ENABLE_NAS_UE_LOGGING False)
set(ENABLE_NEW_MULTICAST True)
set(ENABLE_PDCP_NETLINK_FIFO True)
set(ENABLE_PGM_TRANSPORT True)
set(ENABLE_RAL True)
set(ENABLE_SECURITY False)
set(ENABLE_USE_CPU_EXECUTION_TIME True)
set(ENABLE_USE_MME False)
set(ENABLE_VCD_FIFO True)
set(HARD_RT False)
set(JUMBO_FRAME True)
set(LARGE_SCALE False)
set(LINK_PDCP_TO_GTPV1U False)
set(LINUX_LIST False)
set(LINUX True)
set(LOCALIZATION False)
set(LOG_NO_THREAD True)
set(LOWLATENCY False)
set(MAC_CONTEXT 1)
set(MAX_NUM_CCs 1)
set(MIH_C_MEDIEVAL_EXTENSIONS True)
set(MSG_PRINT False)
set(MU_RECEIVER False)
set(NAS_ADDRESS_FIX true)
set(NAS_NETLINK True)
set(NAS_UE True)
set(NEW_FFT True)
set(NO_RRM True)
set(OAI_EMU True)
set(OAI_EMU True)
set(OAI_NW_DRIVER_TYPE_ETHERNET True)
set(OPENAIR1 False)
set(OPENAIR2 True)
set(OPENAIR_EMU True)
set(OPENAIR_LTE True)
set (PACKAGE_NAME "oaisim")
set(PACKAGE_NAME "oaisim")
set(PBS_SIM False)
set(PC_DSP False)
set(PC_TARGET False)
set(PDCP_MSG_PRINT False)
set(PERFECT_CE False)
set(PHY_ABSTRACTION True)
set(PHY_ABSTRACTION True)
set(PHY_EMUL False)
set(PHYSIM False)
set(PUCCH True)
set(RANDOM_BF False)
set(RF_BOARD "NoBoard")
set(RLC_STOP_ON_LOST_PDU True)
set(RRC_ASN1_VERSION False)
set(RRC_ASN1_VERSION "Rel10")
set(RRC_MSG_PRINT False)
set(RTAI False)
set(SECU False)
set(SMBV False)
set(SPECTRA False)
set(TEST_OMG False)
set(UE_BUILD False)
set(USE_3GPP_ADDR_AS_LINK_ADDR False)
set(USE_MME False)
set(USER_MODE True)
set(XER_PRINT False)
set(XFORMS False)
set ( ADDR_CONF False )
set ( ASSERT True )
set ( DEBUG_OMG False )
set ( DISABLE_USE_NAS False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 False )
set ( EMOS False )
set ( ENABLE_FXP True )
set ( ENABLE_ITTI True )
set ( ENABLE_NAS_UE_LOGGING False )
set ( ENABLE_NEW_MULTICAST True )
set ( ENABLE_PDCP_NETLINK_FIFO False )
set ( ENABLE_PGM_TRANSPORT True )
set ( ENABLE_RAL True )
set ( ENABLE_SECURITY False )
set ( ENABLE_STANDALONE_EPC False )
set ( ENABLE_USE_CPU_EXECUTION_TIME True )
set ( ENABLE_USE_GTPU_IN_KERNEL False )
set ( ENABLE_USE_MME False )
set ( ENABLE_USE_NETFILTER_FOR_SGI False )
set ( ENABLE_USE_PCAP_FOR_SGI False )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI False )
set ( ENABLE_VCD_FIFO True )
set ( ENB_MODE True )
set ( EPC_BUILD False )
set ( HARD_RT False )
set ( JUMBO_FRAME True )
set ( LARGE_SCALE False )
set ( LINK_ENB_PDCP_TO_GTPV1U False )
set ( LINK_ENB_PDCP_TO_IP_DRIVER False )
set ( LINK_PDCP_TO_GTPV1U False )
set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD True )
set ( LOWLATENCY False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MIH_C_MEDIEVAL_EXTENSIONS True )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX False )
set ( NAS_BUILT_IN_EPC False )
set ( NAS_BUILT_IN_UE False )
set ( NAS_MME False )
set ( NAS_NETLINK False )
set ( NAS_UE False )
set ( NB_ANTENNAS_RX 2 )
set ( NB_ANTENNAS_TX 2 )
set ( NB_ANTENNAS_TXRX 2 )
set ( NEW_FFT True )
set ( NO_RRM True )
set ( OAI_EMU True )
set ( OAI_NW_DRIVER_TYPE_ETHERNET True )
set ( OAI_NW_DRIVER_USE_NETLINK False )
set ( OAISIM True )
set ( OPENAIR1 False )
set ( OPENAIR2 True )
set ( OPENAIR_EMU False )
set ( OPENAIR_LTE True )
set ( PBS_SIM False )
set ( PC_DSP False )
set ( PC_TARGET False )
set ( PDCP_MSG_PRINT False )
set ( PDCP_USE_NETLINK_QUEUES False )
set ( PDCP_USE_NETLINK True )
set ( PERFECT_CE False )
set ( PHY_ABSTRACTION True )
set ( PHY_CONTEXT 1 )
set ( PHY_EMUL False )
set ( PHYSIM False )
set ( PUCCH True )
set ( RANDOM_BF False )
set ( RF_BOARD False )
set ( RLC_STOP_ON_LOST_PDU True )
set ( RRC_ASN1_VERSION Rel10 )
set ( RRC_DEFAULT_RAB_IS_AM False )
set ( RRC_MSG_PRINT False )
set ( RTAI False )
set ( S1AP_LIMIT_STREAM_ID_TO_1 False )
set ( S1AP_VERSION R10 )
set ( SMBV False )
set ( SPECTRA False )
set ( STOP_ON_IP_TRAFFIC_OVERLOAD False )
set ( TEST_OMG False )
set ( TRACE_RLC_AM_BO False )
set ( TRACE_RLC_AM_FREE_SDU False )
set ( TRACE_RLC_AM_HOLE False )
set ( TRACE_RLC_AM_PDU True )
set ( TRACE_RLC_AM_RESEGMENT False )
set ( TRACE_RLC_AM_RX_DECODE False )
set ( TRACE_RLC_AM_RX False )
set ( TRACE_RLC_AM_STATUS_CREATION False )
set ( TRACE_RLC_AM_TX False )
set ( TRACE_RLC_AM_TX_STATUS False )
set ( TRACE_RLC_PAYLOAD False )
set ( TRACE_RLC_UM_DAR False )
set ( TRACE_RLC_UM_DISPLAY_ASCII_DATA False )
set ( TRACE_RLC_UM_PDU True )
set ( TRACE_RLC_UM_RX False )
set ( TRACE_RLC_UM_SEGMENT False )
set ( TRACE_RLC_UM_TX_STATUS False )
set ( UE_BUILD False )
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME False )
set ( USER_MODE True )
set ( XER_PRINT False )
set ( XFORMS False )
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/test.0120/CMakeLists.txt 0 → 100644
View file @ 1a80de79
cmake_minimum_required(VERSION 2.8)
set ( ADDR_CONF False )
set ( ASSERT True )
set ( DEBUG_OMG False )
set ( DISABLE_USE_NAS False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 False )
set ( EMOS False )
set ( ENABLE_FXP True )
set ( ENABLE_ITTI False )
set ( ENABLE_NAS_UE_LOGGING False )
set ( ENABLE_NEW_MULTICAST True )
set ( ENABLE_PDCP_NETLINK_FIFO False )
set ( ENABLE_PGM_TRANSPORT True )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY False )
set ( ENABLE_STANDALONE_EPC False )
set ( ENABLE_USE_CPU_EXECUTION_TIME True )
set ( ENABLE_USE_GTPU_IN_KERNEL False )
set ( ENABLE_USE_MME False )
set ( ENABLE_USE_NETFILTER_FOR_SGI False )
set ( ENABLE_USE_PCAP_FOR_SGI False )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI False )
set ( ENABLE_VCD_FIFO True )
set ( ENB_MODE True )
set ( EPC_BUILD False )
set ( HARD_RT False )
set ( JUMBO_FRAME True )
set ( LARGE_SCALE False )
set ( LINK_ENB_PDCP_TO_GTPV1U False )
set ( LINK_ENB_PDCP_TO_IP_DRIVER False )
set ( LINK_PDCP_TO_GTPV1U False )
set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD True )
set ( LOWLATENCY False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MIH_C_MEDIEVAL_EXTENSIONS True )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX False )
set ( NAS_BUILT_IN_EPC False )
set ( NAS_BUILT_IN_UE False )
set ( NAS_MME False )
set ( NAS_NETLINK False )
set ( NAS_UE False )
set ( NB_ANTENNAS_RX 2 )
set ( NB_ANTENNAS_TX 2 )
set ( NB_ANTENNAS_TXRX 2 )
set ( NEW_FFT True )
set ( NO_RRM True )
set ( OAI_EMU True )
set ( OAI_NW_DRIVER_TYPE_ETHERNET False )
set ( OAI_NW_DRIVER_USE_NETLINK False )
set ( OAISIM True )
set ( OPENAIR1 False )
set ( OPENAIR2 True )
set ( OPENAIR_EMU False )
set ( OPENAIR_LTE True )
set ( PBS_SIM False )
set ( PC_DSP False )
set ( PC_TARGET False )
set ( PDCP_MSG_PRINT False )
set ( PDCP_USE_NETLINK_QUEUES False )
set ( PDCP_USE_NETLINK True )
set ( PERFECT_CE False )
set ( PHY_ABSTRACTION True )
set ( PHY_CONTEXT 1 )
set ( PHY_EMUL False )
set ( PHYSIM False )
set ( PUCCH True )
set ( RANDOM_BF False )
set ( RF_BOARD False )
set ( RLC_STOP_ON_LOST_PDU False )
set ( RRC_ASN1_VERSION Rel8 )
set ( RRC_DEFAULT_RAB_IS_AM False )
set ( RRC_MSG_PRINT False )
set ( RTAI False )
set ( S1AP_LIMIT_STREAM_ID_TO_1 False )
set ( S1AP_VERSION R10 )
set ( SMBV False )
set ( SPECTRA False )
set ( STOP_ON_IP_TRAFFIC_OVERLOAD False )
set ( TEST_OMG False )
set ( TRACE_RLC_AM_BO False )
set ( TRACE_RLC_AM_FREE_SDU False )
set ( TRACE_RLC_AM_HOLE False )
set ( TRACE_RLC_AM_PDU True )
set ( TRACE_RLC_AM_RESEGMENT False )
set ( TRACE_RLC_AM_RX_DECODE False )
set ( TRACE_RLC_AM_RX False )
set ( TRACE_RLC_AM_STATUS_CREATION False )
set ( TRACE_RLC_AM_TX False )
set ( TRACE_RLC_AM_TX_STATUS False )
set ( TRACE_RLC_PAYLOAD False )
set ( TRACE_RLC_UM_DAR False )
set ( TRACE_RLC_UM_DISPLAY_ASCII_DATA False )
set ( TRACE_RLC_UM_PDU True )
set ( TRACE_RLC_UM_RX False )
set ( TRACE_RLC_UM_SEGMENT False )
set ( TRACE_RLC_UM_TX_STATUS False )
set ( UE_BUILD False )
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME False )
set ( USER_MODE True )
set ( XER_PRINT True )
set ( XFORMS False )
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/build_oai.bash
View file @ 1a80de79
......@@ -37,7 +37,7 @@
################################
ORIGIN_PATH=$PWD
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
source $THIS_SCRIPT_PATH/build_helper.bash
source $THIS_SCRIPT_PATH/tools/build_helper.bash
#EMULATION_DEV_INTERFACE="eth0"
#EMULATION_MULTICAST_GROUP=1
......@@ -60,14 +60,14 @@ do
clean_kernel
echo_info "Erased iptables config and removed modules from kernel"
shift;;
-C | --config-file)
CONFIG_FILE=$2
echo_info "Will install the config file $CONFIG_FILE"
shift 2;;
-I | --install-external-packages)
INSTALL_EXTERNAL=1
echo_info "Will install external packages"
shift;;
--install-optional-packages)
INSTALL_OPTIONAL=1
echo_info "Will install optional packages"
shift;;
-g | --run-with-gdb)
GDB=1
echo_info "Will Compile with gdb symbols"
......@@ -141,7 +141,7 @@ echo_info "2. Setting the OAI PATHS ..."
set_openair_env
cecho "OPENAIR_HOME = $OPENAIR_HOME" $green
dbin=$OPENAIR_HOME/cmake_targets/bin
dbin=$OPENAIR_HOME/targets/bin
dlog=$OPENAIR_HOME/cmake_targets/log
mkdir -p $dbin $dlog
......@@ -149,13 +149,18 @@ if [ "$INSTALL_EXTERNAL" = "1" ] ; then
echo_info "Installing packages"
check_install_oai_software
echo_info "Making X.509 certificates"
make_certs
make_certs eur
if [ "$HW" == "USRP" ] ; then
echo_info "installing packages for USRP support"
check_install_usrp_uhd_driver
fi
fi
if [ "$INSTALL_OPTIONAL" = "1" ] ; then
echo_info "Installing optional packages"
check_install_additional_tools
fi
echo_info "3. building the compilation directives ..."
DIR=$OPENAIR_HOME/cmake_targets
......@@ -164,6 +169,7 @@ DIR=$OPENAIR_HOME/cmake_targets
#####################################"
# For eNB, UE, ...
############
mkdir -p $DIR/lte_build_oai/build
cmake_file=$DIR/lte_build_oai/CMakeLists.txt
echo "cmake_minimum_required(VERSION 2.8)" > $cmake_file
......@@ -177,6 +183,7 @@ cd $DIR/lte_build_oai/build
cmake ..
# For EPC
############
cmake_file=$DIR/epc_build_oai/CMakeLists.txt
cp $DIR/epc_build_oai/CMakeLists.template $cmake_file
echo "set(ENABLE_VCD_FIFO $VCD_TIMING )" >> $cmake_file
......@@ -186,6 +193,7 @@ cd $DIR/epc_build_oai/build
cmake ..
# For oaisim
############
cmake_file=$DIR/oaisim_build_oai/CMakeLists.txt
cp $DIR/oaisim_build_oai/CMakeLists.template $cmake_file
echo "set(XFORMS $XFORMS )" >> $cmake_file
......@@ -196,7 +204,20 @@ mkdir -p $DIR/oaisim_build_oai/build
cd $DIR/oaisim_build_oai/build
cmake ..
# For oaisim_mme
############
cmake_file=$DIR/oaisim_mme_build_oai/CMakeLists.txt
cp $DIR/oaisim_mme_build_oai/CMakeLists.template $cmake_file
echo "set(XFORMS $XFORMS )" >> $cmake_file
echo "set(RRC_ASN1_VERSION \"${REL}\")" >> $cmake_file
echo "set(ENABLE_VCD_FIFO $VCD_TIMING )" >> $cmake_file
echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
mkdir -p $DIR/oaisim_build_oai/build
cd $DIR/oaisim_build_oai/build
cmake ..
# For unitary test simulators
###################
cd $OPENAIR_DIR/cmake_targets/lte-simulators
[ "$CLEAN" = "1" ] && rm -rf build
mkdir -p build
......@@ -210,6 +231,10 @@ if [ "$eNB" = "1" -o "UE" = "1" ] ; then
compilations \
lte_build_oai lte-softmodem \
lte-softmodem lte-softmodem.$REL
# nasmesh driver compilation
compilations \
oaisim_build_oai nasmesh \
CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
fi
if [ "$UE" = 1 ] ; then
......@@ -219,11 +244,11 @@ if [ "$UE" = 1 ] ; then
lte_build_oai ue_ip \
CMakeFiles/ue_ip/ue_ip.ko $dbin/ue_ip.ko
compilations \
lte_build_oai usim_data \
usim_data $dbin/usim_data
lte_build_oai usim \
usim $dbin/usim
compilations \
lte_build_oai ue_data \
ue_data $dbin/ue_data
lte_build_oai nvram \
nvram $dbin/nvram
fi
if [ "$SIMUS_PHY" = "1" ] ; then
......@@ -238,10 +263,11 @@ if [ "$SIMUS_PHY" = "1" ] ; then
fi
# Core simulators
#############
if [ "$SIMUS_CORE" = "1" ] ; then
# lte unitary simulators compilation
echo_info "Compiling unitary tests simulators"
simlist="secu_knas_encrypt_eia1 secu_kenb aes128_ctr_encrypt aes128_ctr_decrypt secu secu_knas_stream_int secu_knas_encrypt_eea2 secu_knas secu_knas_encrypt_eea1 kdf aes128_cmac_encrypt secu_knas_encrypt_eia2"
simlist="secu_knas_encrypt_eia1 secu_kenb aes128_ctr_encrypt aes128_ctr_decrypt secu_knas_encrypt_eea2 secu_knas secu_knas_encrypt_eea1 kdf aes128_cmac_encrypt secu_knas_encrypt_eia2"
for f in $simlist ; do
compilations \
lte-simulators test_$f \
......@@ -250,6 +276,7 @@ if [ "$SIMUS_CORE" = "1" ] ; then
fi
# EXMIMO drivers & firmware loader
###############
if [ "$HW" = "EXMIMO" ] ; then
echo_info "Compiling Express MIMO 2 board drivers"
compilations \
......@@ -266,16 +293,12 @@ if [ "$oaisim" = "1" ] ; then
oaisim_build_oai oaisim \
oaisim $dbin/oaisim.$REL
compilations \
oaisim_build_oai oaisim_mme \
oaisim_mme_build_oai oaisim_mme \
oaisim_mme $dbin/oaisim_mme.$REL
#oai_nw_drv
compilations \
oaisim_build_oai oai_nw_drv \
CMakeFiles/oai_nw_drv/oai_nw_drv.ko $dbin/oai_nw_drv.ko
# nasmesh driver compilation
compilations \
oaisim_build_oai nasmesh \
CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
fi
# EPC compilation
......@@ -284,11 +307,12 @@ if [ "$EPC" = "1" ] ; then
echo_info "Compiling EPC"
compilations \
epc_build_oai oai_epc \
oai_epc $dbin/oai_epc.$REL
compilations \
epc_build_oai oai_sgw \
oai_sgw $dbin/oai_sgw.$REL
epc_build_oai mme_gw \
mme_gw $dbin/mme_gw.$REL
# Only integrated mme+sgw+pgw is operational today
# compilations \
# epc_build_oai oai_sgw \
# oai_sgw $dbin/oai_sgw.$REL
compilations \
epc_build_oai xt_GTPUAH_lib \
libxt_GTPUAH_lib.so $dbin
......@@ -306,27 +330,29 @@ if [ "$EPC" = "1" ] ; then
fi
if [ "$INSTALL_SYSTEM_FILES" = "1" ] ;then
echo_info "Copying iptables libraries into system directory: /lib/xtables"
$SUDO ln -s $dbin/libxt_GTPURH_lib.so /lib/xtables/libxt_GTPURH.so
$SUDO ln -s $dbin/libxt_GTPUAH_lib.so /lib/xtables/libxt_GTPUAH.so
fi
# Install config file
###################
if [ "$CONFIG_FILE" != "" ] ; then
dconf=$DIR/conf
dconf=$OPENAIR_TARGETS/bin
mkdir -p $dconf
cp $ORIGIN_PATH/$CONFIG_FILE $dconf || echo_fatal "config file $ORIGIN_PATH/$CONFIG_FILE not found"
# generate USIM data
install_nas_tools $dbin $dconf
# Do EPC
cp $DIR/epc_build_oai/epc.*.conf $dconf
$SUDO cp $DIR/epc_build_oai/epc_s6a.conf /usr/local/etc/freeDiameter
# Do HSS
# bash doesn't like space char around = char
sed -e 's/ *= */=/' $OPENAIRCN_DIR/OPENAIRHSS/conf/hss.local.conf > $dconf/hss.local.conf
source $dconf/hss.local.conf
cp $DIR/hss_build/hss.conf $dbin
$SUDO cp $DIR/hss_build/hss_fd.conf $DIR/hss_build/acl.conf /usr/local/etc/freeDiameter
sed -e 's/ *= */=/' $OPENAIRCN_DIR/OPENAIRHSS/conf/hss.conf > $dconf/hss.conf.nospace
source $dconf/hss.conf.nospace
create_hss_database root linux "$MYSQL_user" "$MYSQL_pass" "$MYSQL_db"
fi
......@@ -336,143 +362,7 @@ fi
if [ "$OAI_TEST" = "1" ]; then
echo_info "10. Running OAI pre commit tests (pre-ci) ..."
$OPENAIR_DIR/cmake_targets/autotests/run_compilation_autotests.bash
$OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash
else
echo_info "10. Bypassing the Tests ..."
fi
exit 0
###########################################
# configure and compile
##########################################
HSS_REALM=$(echo $Identity | sed 's/.*\.//')
HSS_HOSTNAME=${Identity%.$HSS_REALM}
NEW_HOSTNAME=`hostname -s`
if [ "x$HSS_HOSTNAME" != "x$NEW_HOSTNAME" ]; then
echo_warning "Changing identity of HSS from <$HSS_HOSTNAME.$HSS_REALM> to <$NEW_HOSTNAME.$HSS_REALM>"
sed -ibak "s/$HSS_HOSTNAME/$NEW_HOSTNAME/" $OPENAIRCN_DIR/OPENAIRHSS/conf/hss_fd.conf
fi
check_hss_s6a_certificate $HSS_REALM
######################################
# fill the HSS DB
######################################
echo_info "6. create HSS database (for EURECOM SIM CARDS)"
hss_db_created=1
create_hss_database $OAI_DB_ADMIN_USER_NAME $OAI_DB_ADMIN_USER_PASSWORD $MYSQL_user $MYSQL_pass $MYSQL_db
if [ $? -eq 1 ]; then
echo_fatal "hss DB not created"
fi
}
############################################
# run
############################################
if [ $RUN -ne 0 ]; then
echo_info "11. Running ..."
cd $OPENAIR_TARGETS/bin
case "$BUILD_LTE" in
'ENB')
if [ $TARGET == "SOFTMODEM" ]; then
if [ $HW == "EXMIMO" ]; then
$SUDO $OPENAIR_TARGETS/RT/USER/init_exmimo2.sh
fi
echo "############# running ltesoftmodem #############"
if [ $RUN_GDB -eq 0 ]; then
$SUDO $OPENAIR_TARGETS/bin/lte-softmodem `echo $EXE_ARGUMENTS`
else
$SUDO setenv MALLOC_CHECK_ 2
$SUDO touch ~/.gdb_lte_softmodem
$SUDO echo "file $OPENAIR_TARGETS/bin/lte-softmodem" > ~/.gdb_lte_softmodem
$SUDO echo "set args $EXE_ARGUMENTS" >> ~/.gdb_lte_softmodem
$SUDO echo "run" >> ~/.gdb_lte_softmodem
$SUDO gdb -nh -x ~/.gdb_lte_softmodem 2>&1
fi
elif [ $TARGET == "OAISIM" ]; then
if [ $ENB_S1 -eq 0 ]; then
install_nasmesh
else
# prepare NAS for UE
if [ ! -f .ue.nvram ]; then
echo_success "generate .ue_emm.nvram .ue.nvram"
$OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/ue_data --gen
fi
if [ ! -f .usim.nvram ]; then
echo_success "generate .usim.nvram"
$OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/usim_data --gen
fi
$OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/ue_data --print
$OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/usim_data --print
insmod $OPENAIR2_DIR/NETWORK_DRIVER/UE_IP/ue_ip.ko
fi
if [ $RUN_GDB -eq 0 ]; then
$SUDO exec $OPENAIR_TARGETS/bin/oaisim `echo $EXE_ARGUMENTS`
else
$SUDO setenv MALLOC_CHECK_ 2
$SUDO touch ~/.gdb_oaisim
$SUDO echo "file $OPENAIR_TARGETS/bin/lte-oaisim" > ~/.gdb_oaisim
$SUDO echo "set args $EXE_ARGUMENTS" >> ~/.gdb_oaisim
$SUDO echo "run" >> ~/.gdb_oaisim
$SUDO gdb -nh -x ~/.gdb_oaisim 2>&1
fi
fi
;;
'EPC')
echo "############# running EPC #############"
test_is_host_reachable $HSS_HOSTNAME.$REALM HSS
if [ $RUN_GDB -eq 0 ]; then
$SUDO $OPENAIR_TARGETS/bin/oai_epc `echo $EXE_ARGUMENTS`
else
touch ~/.gdb_epc
chmod 777 ~/.gdb_epc
echo "file $OPENAIR_TARGETS/bin/oai_epc" > ~/.gdb_epc
echo "set args $EXE_ARGUMENTS" >> ~/.gdb_epc
echo "run" >> ~/.gdb_epc
$SUDO gdb -nh -x ~/.gdb_epc 2>&1
fi
;;
'HSS')
echo "############# running HSS #############"
cd $OPENAIRCN_DIR/OPENAIRHSS/objs
if [ $RUN_GDB -eq 0 ]; then
$SUDO exec ./openair-hss -c ./conf/hss.conf
else
touch ~/.gdb_hss
chmod 777 ~/.gdb_hss
echo "file ./openair-hss" > ~/.gdb_hss
echo "set args -c ./conf/hss.conf" >> ~/.gdb_hss
echo "run" >> ~/.gdb_hss
$SUDO gdb -nh -x ~/.gdb_hss 2>&1
fi
;;
'NONE')
;;
*)
echo_error "Unknown option $BUILD_LTE: do not execute"
;;
esac
else
echo_info "11. No run requested, end of script"
exit 0
fi
cmake_targets/epc_build_oai/CMakeLists.template
View file @ 1a80de79
......@@ -38,6 +38,7 @@ set ( MIH_C_MEDIEVAL_EXTENSIONS False )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX False )
set ( NAS_BUILT_IN_EPC True )
set ( NAS_MME True )
set ( NAS_NETLINK False )
set ( NAS_UE False )
......
cmake_targets/hss_build/CMakeLists.txt 0 → 100755
View file @ 1a80de79
################################################################################
# OpenAirInterface
# Copyright(c) 1999 - 2014 Eurecom
#
# OpenAirInterface is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# OpenAirInterface is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with OpenAirInterface.The full GNU General Public License is
# included in this distribution in the file called "COPYING". If not,
# see <http://www.gnu.org/licenses/>.
#
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@eurecom.fr
#
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
# Author: Lionel GAUTHIER
###############################################################################
cmake_minimum_required(VERSION 2.8)
set(CMAKE_VERBOSE_MAKEFILE ON)
project(HSS)
ENABLE_LANGUAGE(C)
#Sends the -std=c99 flag to the gcc compiler
#add_definitions(-std=c99)
ADD_DEFINITIONS(-D_GNU_SOURCE)
set(OPENAIR_DIR $ENV{OPENAIR_DIR})
set(OPENAIR1_DIR ${OPENAIR_DIR}/openair1)
set(OPENAIR2_DIR ${OPENAIR_DIR}/openair2)
set(OPENAIR3_DIR ${OPENAIR_DIR}/openair3)
set(OPENAIRCN_DIR ${OPENAIR_DIR}/openair-cn)
set(OPENAIR_TARGETS ${OPENAIR_DIR}/targets)
set(OPENAIR_CMAKE_SCRIPTS ${OPENAIR_DIR}/cmake_targets/tools)
set(OPENAIRHSS_DIR ${OPENAIRCN_DIR}/OPENAIRHSS)
set(OPENAIR_BIN_DIR ${OPENAIR_TARGETS}/bin)
set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${OPENAIR_TARGETS}/CMAKE/MODULES/")
include(cmake_useful)
macro(add_option name val helpstr)
if(DEFINED ${name})
set(value ${${name}})
else(DEFINED ${name})
set(value ${val})
endif()
set(${name} ${value} CACHE STRING "${helpstr}")
add_definitions("-D${name}=${value}")
endmacro(add_option)
# compilation flags
# added CMAKER conditional compilation to not bother legacy building system
#############################################
if(NOT CMAKE_BUILD_TYPE)
set(CMAKE_BUILD_TYPE "RelWithDebInfo" CACHE STRING "Choose the type of build, options are: None(CMAKE_CXX_FLAGS or CMAKE_C_FLAGS used) Debug Release RelWithDebInfo MinSizeRel." FORCE)
endif()
set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS Debug Release RelWithDebInfo MinSizeRel)
#
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -msse4.2 -std=gnu99 -Wall -Wstrict-prototypes -fno-strict-aliasing -rdynamic -funroll-loops -Wno-packed-bitfield-compat -DCMAKER")
set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} -ggdb -DMALLOC_CHECK_=3")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO} -ggdb -DMALLOC_CHECK_=3 -O2")
INCLUDE(FindMySQL)
IF( NOT MySQL_FOUND )
MESSAGE( SEND_ERROR "MySQL Client is required" )
ENDIF( NOT MySQL_FOUND )
INCLUDE(FindNettle)
IF( NOT NETTLE_FOUND )
MESSAGE( SEND_ERROR "Nettle is required" )
ENDIF( NOT NETTLE_FOUND )
INCLUDE(FindFreeDiameter)
IF( NOT FREEDIAMETER_FOUND )
MESSAGE( SEND_ERROR "FreeDiameter is required (use OAI installer)" )
ENDIF( NOT FREEDIAMETER_FOUND )
IF( NOT FREEDIAMETER_HSS_S6A_ENABLED )
MESSAGE( SEND_ERROR "FreeDiameter is not enabled for OPENAIRHSS" )
ENDIF( NOT FREEDIAMETER_HSS_S6A_ENABLED )
add_definitions("-DFREEDIAMETER_VERSION=${FREEDIAMETER_VERSION}")
find_package(BISON REQUIRED)
find_package(FLEX REQUIRED)
set(CMAKE_THREAD_PREFER_PTHREAD TRUE)
find_package(Threads REQUIRED)
#find_package(Subversion)
#if(SUBVERSION_FOUND)
# Subversion_WC_INFO(${OPENAIR_DIR} openair)
# set (PACKAGE_VERSION "${openair_WC_REVISION} - ${openair_WC_LAST_CHANGED_DATE}")
# Subversion_WC_LOG(${OPENAIR_DIR} openair)
# message("Last changed log is ${openair_LAST_CHANGED_LOG}")
# add_definitions("-DPACKAGE_VERSION=\"${PACKAGE_VERSION}\"")
#else()
set (PACKAGE_VERSION "No svn information")
#endif()
add_definitions("-DPACKAGE_NAME=\"OPENAIRHSS\"")
################################################################################
# ACCESS RESTRICTION LIB
################################################################################
set(ar_SRC
${OPENAIRHSS_DIR}/access_restriction/access_restriction.c
)
set(ar_HDR
${OPENAIRHSS_DIR}/access_restriction/access_restriction.h
${OPENAIRHSS_DIR}/utils/conversion.h
)
add_library(hss_access_restriction ${ar_SRC} ${ar_HDR})
target_include_directories(hss_access_restriction PRIVATE ${OPENAIRHSS_DIR}/utils)
################################################################################
# AUC LIB
################################################################################
set(auc_SRC
${OPENAIRHSS_DIR}/auc/fx.c
${OPENAIRHSS_DIR}/auc/kdf.c
${OPENAIRHSS_DIR}/auc/random.c
${OPENAIRHSS_DIR}/auc/rijndael.c
${OPENAIRHSS_DIR}/auc/sequence_number.c
)
set(auc_HDR
${OPENAIRHSS_DIR}/auc/auc.h
)
add_library(hss_auc ${auc_SRC} ${auc_HDR})
################################################################################
# DB LIB
################################################################################
set(db_SRC
${OPENAIRHSS_DIR}/db/db_connector.c
${OPENAIRHSS_DIR}/db/db_epc_equipment.c
${OPENAIRHSS_DIR}/db/db_subscription_data.c
)
set(db_HDR
${OPENAIRHSS_DIR}/db/db_proto.h
${OPENAIRHSS_DIR}/utils/hss_config.h
)
add_library(hss_db ${db_SRC} ${db_HDR})
target_include_directories(hss_db PRIVATE ${OPENAIRHSS_DIR}/utils)
################################################################################
# S6A LIB
################################################################################
set(s6a_SRC
${OPENAIRHSS_DIR}/s6a/s6a_auth_info.c
${OPENAIRHSS_DIR}/s6a/s6a_common.c
${OPENAIRHSS_DIR}/s6a/s6a_error.c
${OPENAIRHSS_DIR}/s6a/s6a_fd.c
${OPENAIRHSS_DIR}/s6a/s6a_in_addr.c
${OPENAIRHSS_DIR}/s6a/s6a_peers.c
${OPENAIRHSS_DIR}/s6a/s6a_purge_ue.c
${OPENAIRHSS_DIR}/s6a/s6a_subscription_data.c
${OPENAIRHSS_DIR}/s6a/s6a_supported_features.c
${OPENAIRHSS_DIR}/s6a/s6a_up_loc.c
)
set(s6a_HDR
${OPENAIRHSS_DIR}/s6a/s6a_proto.h
${OPENAIRHSS_DIR}/db/db_proto.h
${OPENAIRHSS_DIR}/utils/hss_config.h
${OPENAIRHSS_DIR}/auc/auc.h
${OPENAIRHSS_DIR}/access_restriction/access_restriction.h
)
add_library(hss_s6a ${s6a_SRC} ${s6a_HDR})
target_include_directories(hss_s6a PRIVATE ${OPENAIRHSS_DIR}/utils)
target_include_directories(hss_s6a PRIVATE ${OPENAIRHSS_DIR}/db)
target_include_directories(hss_s6a PRIVATE ${OPENAIRHSS_DIR}/auc)
target_include_directories(hss_s6a PRIVATE ${OPENAIRHSS_DIR}/access_restriction)
target_include_directories(hss_s6a PRIVATE ${FREEDIAMETER_INCLUDE_DIR})
################################################################################
# UTILS LIB
################################################################################
# Create target for the parser
ADD_CUSTOM_TARGET(HSSParser echo "Creating hss_parser.c")
set(UTILS_GENERATED_DIR ${OPENAIR_BIN_DIR})
# Create custom command for flex/lex (note the outputs)
ADD_CUSTOM_COMMAND(
SOURCE ${OPENAIRHSS_DIR}/utils/hss_scanner.l
COMMAND ${FLEX_EXECUTABLE}
ARGS -o${UTILS_GENERATED_DIR}/hss_scanner.c ${OPENAIRHSS_DIR}/utils/hss_scanner.l
TARGET HSSParser
OUTPUTS ${UTILS_GENERATED_DIR}/hss_scanner.c)
# Create custom command for bison/yacc (note the DEPENDS)
ADD_CUSTOM_COMMAND(
SOURCE ${OPENAIRHSS_DIR}/utils/hss_parser.y
COMMAND ${BISON_EXECUTABLE}
ARGS -y ${OPENAIRHSS_DIR}/utils/hss_parser.y
-o ${UTILS_GENERATED_DIR}/hss_parser.c
TARGET HSSParser
DEPENDS ${UTILS_GENERATED_DIR}/hss_scanner.c
OUTPUTS ${UTILS_GENERATED_DIR}/hss_parser.c)
set(utils_SRC
${UTILS_GENERATED_DIR}/hss_scanner.c
${UTILS_GENERATED_DIR}/hss_parser.c
${OPENAIRHSS_DIR}/utils/conversion.c
${OPENAIRHSS_DIR}/utils/hss_config.c
)
set(utils_HDR
${UTILS_GENERATED_DIR}/hss_parser.h
${UTILS_GENERATED_DIR}/hss_scanner.h
${OPENAIRHSS_DIR}/utils/conversion.h
${OPENAIRHSS_DIR}/utils/hss_config.h
${OPENAIRHSS_DIR}/utils/queue.h
)
# Since parser.c does not exists yet when cmake is run, mark
# it as generated
SET_SOURCE_FILES_PROPERTIES(${UTILS_GENERATED_DIR}/hss_parser.c GENERATED)
SET_SOURCE_FILES_PROPERTIES(${UTILS_GENERATED_DIR}/hss_scanner.c GENERATED)
SET_SOURCE_FILES_PROPERTIES(${UTILS_GENERATED_DIR}/hss_parser.h GENERATED)
SET_SOURCE_FILES_PROPERTIES(${UTILS_GENERATED_DIR}/hss_scanner.h GENERATED)
SET_SOURCE_FILES_PROPERTIES(${OPENAIRHSS_DIR}/utils/hss_config.c DEPENDS ${UTILS_GENERATED_DIR}/hss_parser.c)
add_library(hss_utils ${utils_SRC} ${utils_HDR})
################################################################################
# EXECUTABLE openair-hss
################################################################################
include_directories( ${UTILS_GENERATED_DIR} ${OPENAIRHSS_DIR}/utils ${OPENAIRHSS_DIR}/s6a ${OPENAIRHSS_DIR}/db ${OPENAIRHSS_DIR}/auc ${OPENAIRHSS_DIR}/access_restriction)
ADD_EXECUTABLE(openair-hss ${OPENAIRHSS_DIR}/hss_main.c)
target_link_libraries (openair-hss
-Wl,-whole-archive
hss_access_restriction
hss_auc
hss_db
hss_s6a
hss_utils
-Wl,-no-whole-archive
${MySQL_LIBRARY}
${NETTLE_LIBRARIES}
${FREEDIAMETER_LIBRARIES}
${CMAKE_THREAD_LIBS_INIT} )
# Default parameters
site_name(SITE_HSS_FQDN)
add_option(HSS_FQDN ${SITE_HSS_FQDN} "HSS Fully qualified domain name")
add_option(REALM openair4G.eur "HSS realm TODO: extract this default value from SITE_HSS_FQDN")
add_option(MYSQL_server "127.0.0.1" "Database server IP address")
add_option(MYSQL_admin root "Database admin login")
add_option(MYSQL_admin_pass linux "Database admin password")
add_option(MYSQL_user hssadmin "Database username login")
add_option(MYSQL_pass admin "Database username password")
add_option(MYSQL_db oai_db "Database name")
add_option(TRANSPORT_option No_SCTP "No_TCP or No_SCTP, FreeDiameter config option")
add_option(TRANSPORT_PREFER_TCP_option Prefer_TCP "Prefer_TCP or null string, FreeDiameter config option")
add_option(AppServThreads 2 "FreeDiameter AppServThreads config option")
add_option(OPERATOR_key "11111111111111111111111111111111" "LTE operator clear text key (hex bytes)")
add_option(REMOTE_PEER_WHITELIST "*.${REALM}" "Remote peer whitlist (separeted by spaces), for freediameter acl.conf config file")
IF( FD_SERVER_IP_BIND_LIST )
set(ListenOn "ListenOn=\"${FD_SERVER_IP_BIND_LIST}\"" "//FreeDiameter server IP bind addresses list")
ELSE( FD_SERVER_IP_BIND_LIST )
set(ListenOn "#ListenOn=\"\"" "//FreeDiameter server IP bind addresses list")
ENDIF( FD_SERVER_IP_BIND_LIST )
configure_file(
${OPENAIRHSS_DIR}/conf/hss_fd.conf.in
${CMAKE_CURRENT_BINARY_DIR}/hss_fd.conf)
configure_file(
${OPENAIRHSS_DIR}/conf/hss.conf.in
${CMAKE_CURRENT_BINARY_DIR}/hss.conf)
configure_file(
${OPENAIRHSS_DIR}/conf/acl.conf.in
${CMAKE_CURRENT_BINARY_DIR}/acl.conf)
install (TARGETS openair-hss
DESTINATION ${OPENAIR_TARGETS}/bin)
cmake_targets/lte-r10-exmimo/CMakeLists.txt deleted 100644 → 0
View file @ e0b90b9c
cmake_minimum_required(VERSION 2.8)
set(PACKAGE_NAME "lte-softmodem")
include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)
cmake_targets/lte-r10-usrp/CMakeLists.txt deleted 100644 → 0
View file @ e0b90b9c
cmake_minimum_required(VERSION 2.8)
set(PACKAGE_NAME "lte-softmodem")
set(RF_BOARD "USRP")
include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)
cmake_targets/lte-r8/CMakeLists.txt deleted 100644 → 0
View file @ e0b90b9c
cmake_minimum_required(VERSION 2.8)
set(PACKAGE_NAME "lte-softmodem")
set(RRC_ASN1_VERSION "Rel8")
include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)
cmake_targets/oaisim-r8/CMakeLists.txt deleted 100644 → 0
View file @ e0b90b9c
cmake_minimum_required(VERSION 2.8)
set (PACKAGE_NAME "oaisim")
set(MAC_CONTEXT True)
set(PHY_ABSTRACTION True)
set(OPENAIR_EMU True)
set(OAI_EMU True)
set(NAS_ADDRESS_FIX true)
set(RRC_ASN1_VERSION "Rel8")
set(XER_PRINT True)
set(RF_BOARD None)
set(XFORMS False)
include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)
cmake_targets/oaisim_build_oai/CMakeLists.template
View file @ 1a80de79
......@@ -15,8 +15,10 @@ set ( ENABLE_PDCP_NETLINK_FIFO False )
set ( ENABLE_PGM_TRANSPORT True )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY True )
set ( ENABLE_STANDALONE_EPC False)
set ( ENABLE_USE_CPU_EXECUTION_TIME True )
set ( ENABLE_USE_MME True )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI True)
set ( ENABLE_VCD_FIFO True )
set ( EXMIMO_IOT True )
set ( HARD_RT False )
......@@ -52,11 +54,12 @@ set ( OPENAIR_EMU False )
set ( OPENAIR_LTE True )
set ( PACKAGE_NAME "oaisim" )
set ( PBS_SIM False )
set ( PDCP_USE_NETLINK True )
set ( PC_DSP True )
set ( PC_TARGET True )
set ( PDCP_MSG_PRINT False )
set ( PERFECT_CE False )
set ( PHY_ABSTRACTION False )
set ( PHY_ABSTRACTION True )
set ( PHY_CONTEXT False )
set ( PHY_EMUL False )
set ( PHYSIM True )
......
cmake_targets/oaisim_mme_build_oai/CMakeLists.template 0 → 100644
View file @ 1a80de79
cmake_minimum_required(VERSION 2.8)
set ( CMAKE_BUILD_TYPE "RelWithDebInfo" )
set ( ADDR_CONF False )
set ( ASSERT False )
set ( DEBUG_OMG False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 False )
set ( EMOS False )
set ( ENABLE_FXP False )
set ( ENABLE_ITTI True )
set ( ENABLE_NAS_UE_LOGGING False )
set ( ENABLE_NEW_MULTICAST False )
set ( ENABLE_PDCP_NETLINK_FIFO False )
set ( ENABLE_PGM_TRANSPORT False )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY False )
set ( ENABLE_STANDALONE_EPC False )
set ( ENABLE_USE_CPU_EXECUTION_TIME False )
set ( ENABLE_USE_GTPU_IN_KERNEL True )
set ( ENABLE_USE_MME False )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI True)
set ( ENABLE_VCD_FIFO False )
set ( ENB_MODE False )
set ( EPC_BUILD True )
set ( EXMIMO_IOT False )
set ( HARD_RT False )
set ( JUMBO_FRAME False )
set ( LARGE_SCALE False )
set ( LINK_PDCP_TO_GTPV1U False )
set ( LINUX_LIST False )
set ( LINUX False )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD False )
set ( LOWLATENCY False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MIH_C_MEDIEVAL_EXTENSIONS False )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX False )
set ( NAS_BUILT_IN_EPC True )
set ( NAS_MME True )
set ( NAS_NETLINK False )
set ( NAS_UE False )
set ( NB_ANTENNAS_RX "2" )
set ( NB_ANTENNAS_TX "2" )
set ( NB_ANTENNAS_TXRX "2" )
set ( NEW_FFT False )
set ( NO_RRM False )
set ( OAI_EMU False )
set ( OAISIM False )
set ( OAI_NW_DRIVER_TYPE_ETHERNET False )
set ( OAI_NW_DRIVER_USE_NETLINK False )
set ( OPENAIR1 False )
set ( OPENAIR2 False )
set ( OPENAIR_EMU False )
set ( OPENAIR_LTE False )
set ( PACKAGE_NAME "EPC" )
set ( PBS_SIM False )
set ( PC_DSP False )
set ( PC_TARGET False )
set ( PDCP_MSG_PRINT False )
set ( PERFECT_CE False )
set ( PHY_ABSTRACTION False )
set ( PHY_CONTEXT False )
set ( PHY_EMUL False )
set ( PHYSIM False )
set ( PUCCH False )
set ( RANDOM_BF False )
set ( RF_BOARD "False" )
set ( RRC_ASN1_VERSION "Rel10" )
set ( RLC_STOP_ON_LOST_PDU False )
set ( RRC_MSG_PRINT False )
set ( RTAI False )
set ( SECU False )
set ( SMBV False )
set ( SPECTRA False )
set ( TEST_OMG False )
set ( UE_BUILD False )
set ( UPDATE_RELEASE_9 True)
set ( UPDATE_RELEASE_10 True)
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME "R10" )
set ( USER_MODE True )
set ( XER_PRINT False )
set ( XFORMS False )
cmake_targets/build_helper.bash → cmake_targets/tools/build_helper.bash
View file @ 1a80de79
......@@ -76,11 +76,11 @@ Options
Erase all files made by previous compilation, installation"
--clean-kernel
Erase previously installed features in kernel: iptables, drivers, ...
-C | --config-file
The configuration file to install
-I | --install-external-packages
Installs required packages such as LibXML, asn1.1 compiler, freediameter, ...
This option will require root password
--install-optional-packages
Install useful but not mandatory packages such as valgrind
-g | --run-with-gdb
Add debugging symbols to compilation directives
--eNB
......@@ -140,7 +140,8 @@ clean_kernel() {
clean_all_files() {
dir=$OPENAIR_DIR/cmake
rm -rf $dir/log $dir/bin $dir/autotests/bin $dir/autotests/log $dir/autotests/*/buid $dir/build_*/build
rm -rf $dir/log $OPENAIR_TARGETS/bin $dir/autotests/bin $dir/autotests/log $dir/autotests/*/buid $dir/build_*/build
rm -rf $dir/oaisim_build_oai/CMakeLists.txt $dir/epc_build_oai/CMakeLists.txt $dir/hss_build/BUILD
}
###################################
......@@ -154,122 +155,56 @@ compilations() {
make -j4 $2
} > $dlog/$2.$REL.txt 2>&1
if [ -s $3 ] ; then
cp $3 $dbin/$2.$REL
cp $3 $dbin
echo_success "$2 compiled"
else
echo_error "$2 compilation failed"
fi
}
run_tests() {
$1 > $2 2>&1
grep
}
test_compile() {
mkdir -p $tdir/$1/build
cd $tdir/$1/build
{
cmake ..
rm -f $3
make -j4 $2
} > $tdir/log/$1.txt
if [ -s $3 ] ; then
cp $3 $tdir/bin/$3.$1
echo_success "$1 test compiled"
else
echo_error "$1 test compilation failed"
fi
}
run_compilation_autotests() {
tdir=$OPENAIR_DIR/cmake_targets/autotests
mkdir -p $tdir/bin $tdir/log
updated=$(svn st -q $OPENAIR_DIR)
if [ "$updated" != "" ] ; then
echo_warning "some files are not in svn: $updated"
fi
test_compile \
test.0101 oaisim \
oaisim $tdir/bin/oaisim.r8
test_compile \
test.0102 oaisim \
oaisim $tdir/bin/oaisim.r8.nas
test_compile \
test.0103 oaisim \
oaisim $tdir/bin/oaisim.r8.rf
test_compile \
test.0104 dlsim \
dlsim $tdir/bin/dlsim
test_compile \
test.0104 ulsim \
ulsim $tdir/bin/ulsim
test_compile \
test.0106 oaisim \
oaisim $tdir/bin/oaisim.r8.itti
test_compile \
test.0107 oaisim \
oaisim $tdir/bin/oaisim.r10
test_compile \
test.0108 oaisim \
oaisim $tdir/bin/oaisim.r10.itti
test_compile \
test.0114 oaisim \
oaisim $tdir/bin/oaisim.r8.itti.ral
test_compile \
test.0115 oaisim \
oaisim $tdir/bin/oaisim.r10.itti.ral
test_compile \
test.0102 nasmesh \
CMakeFiles/nasmesh/nasmesh.ko $tdir/bin/nasmesh.ko
}
##########################################
# X.509 certificates
##########################################
make_one_cert() {
$SUDO openssl genrsa -out $1.key.pem 1024
$SUDO openssl req -new -batch -out $1.csr.pem -key $1.key.pem -subj /CN=$1.eur/C=FR/ST=PACA/L=Aix/O=Eurecom/OU=CM
$SUDO openssl ca -cert cacert.pem -keyfile cakey.pem -in $1.csr.pem -out $1.cert.pem -outdir . -batch
fqdn=$1
name=$2
$SUDO openssl genrsa -out $name.key.pem 1024
$SUDO openssl req -new -batch -out $name.csr.pem -key $name.key.pem -subj /CN=$name.$fqdn/C=FR/ST=PACA/L=Aix/O=Eurecom/OU=CM
$SUDO openssl ca -cert cacert.pem -keyfile cakey.pem -in $name.csr.pem -out $name.cert.pem -outdir . -batch
}
make_certs(){
fqdn=$1
certs_dir=/usr/local/etc/freeDiameter
# certificates are stored in diameter config directory
if [ ! -d /usr/local/etc/freeDiameter ]; then
echo "Creating non existing directory: /usr/local/etc/freeDiameter/"
$SUDO mkdir -p /usr/local/etc/freeDiameter/ || echo_error "can't create: /usr/local/etc/freeDiameter/"
if [ ! -d $certs_dir ]; then
echo "Creating non existing directory: $certs_dir"
$SUDO mkdir -p $certs_dir || echo_error "can't create: $certs_dir"
fi
cd /usr/local/etc/freeDiameter
cd $certs_dir
echo "creating the CA certificate"
echo_warning "erase all existing certificates as long as the CA is regenerated"
$SUDO rm -f /usr/local/etc/freeDiameter/*.pem
$SUDO rm -f $certs_dir/*.pem
$SUDO mkdir -p $certs_dir/demoCA/
$SUDO sh -c "echo 01 > $certs_dir/demoCA/index.txt"
# CA self certificate
$SUDO openssl req -new -batch -x509 -days 3650 -nodes -newkey rsa:1024 -out cacert.pem -keyout cakey.pem -subj /CN=eur/C=FR/ST=PACA/L=Aix/O=Eurecom/OU=CM
$SUDO openssl req -new -batch -x509 -days 3650 -nodes -newkey rsa:1024 -out cacert.pem -keyout cakey.pem -subj /CN=$fqdn/C=FR/ST=PACA/L=Aix/O=Eurecom/OU=CM
# generate hss certificate and sign it
make_one_cert hss
make_one_cert mme
make_one_cert eur hss
make_one_cert eur mme
# legacy config is using a certificate named 'user'
make_one_cert user
make_one_cert eur user
}
############################################
# External packages installers
############################################
......@@ -316,18 +251,40 @@ install_freediameter_from_source() {
cmake -DCMAKE_INSTALL_PREFIX:PATH=/usr ../
echo "Compiling freeDiameter"
make -j4
make test
#make test
$SUDO make install
rm -rf /tmp/1.1.5.tar.gz /tmp/freeDiameter-1.1.5
}
check_install_usrp_uhd_driver(){
if [ ! -f /etc/apt/sources.list.d/ettus.list ] ; then
$SUDO bash -c 'echo "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/`lsb_release -cs` `lsb_release -cs` main" >> /etc/apt/sources.list.d/ettus.list'
v=$(lsb_release -cs)
$SUDO apt-add-repository "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/$v $v main"
$SUDO apt-get update
fi
$SUDO apt-get -y install python libboost-all-dev libusb-1.0-0-dev
$SUDO apt-get -y install -t `lsb_release -cs` uhd
$SUDO apt-get -y install python python-tk libboost-all-dev libusb-1.0-0-dev
$SUDO apt-get -y install -t `lsb_release -cs` uhd --force-yes
}
check_install_additional_tools (){
$SUDO apt-get update
$SUDO apt-get install -y \
check \
dialog \
dkms \
gawk \
libboost-all-dev \
libpthread-stubs0-dev \
openvpn \
phpmyadmin \
pkg-config \
python-dev \
python-pexpect \
sshfs \
swig \
tshark \
uml-utilities \
unzip \
valgrind \
vlan
}
check_install_oai_software() {
......@@ -338,17 +295,11 @@ check_install_oai_software() {
automake \
bison \
build-essential \
check \
cmake \
cmake-curses-gui \
dialog \
dkms \
doxygen \
ethtool \
flex \
g++ \
gawk \
gcc \
gccxml \
gdb \
graphviz \
......@@ -362,19 +313,17 @@ check_install_oai_software() {
libatlas-dev \
libblas3gf \
libblas-dev \
libboost-all-dev \
libconfig8-dev \
libforms-bin \
libforms-dev \
libgcrypt11-dev \
libgmp-dev \
libgtk-3-dev \
libidn11-dev \
libidn2-0-dev \
libidn11-dev \
libmysqlclient-dev \
libpgm-5.1 \
libpgm-dev \
libpthread-stubs0-dev \
libsctp1 \
libsctp-dev \
libssl-dev \
......@@ -384,26 +333,13 @@ check_install_oai_software() {
libxml2 \
libxml2-dev \
linux-headers-`uname -r` \
make \
mysql-client \
mysql-server \
openssh-client \
openssh-server \
openssl \
openvpn \
phpmyadmin \
pkg-config \
python \
python-dev \
python-pexpect \
sshfs \
subversion \
swig \
tshark \
uml-utilities \
unzip \
valgrind \
vlan
subversion
if [ `lsb_release -rs` = '12.04' ] ; then
install_nettle_from_source
install_gnutls_from_source
......@@ -418,10 +354,10 @@ install_asn1c_from_source(){
mkdir -p /tmp/asn1c-r1516
cd /tmp/asn1c-r1516
rm -rf /tmp/asn1c-r1516/*
svn co https://github.com/vlm/asn1c/trunk /tmp/asn1c-r1516 -r 1516
patch -p0 < $OPENAIRCN_DIR/S1AP/MESSAGES/ASN1/asn1cpatch.p0
svn co https://github.com/vlm/asn1c/trunk /tmp/asn1c-r1516 -r 1516 > /tmp/log_compile_asn1c
patch -p0 < $OPENAIRCN_DIR/S1AP/MESSAGES/ASN1/asn1cpatch.p0 >> /tmp/log_compile_asn1c
./configure
make
make > /tmp/log_compile_asn1c 2>&1
$SUDO make install
}
......@@ -429,45 +365,36 @@ install_asn1c_from_source(){
# 2. compile
################################################
compile_hss() {
cd $OPENAIRCN_DIR/OPENAIRHSS
cd $OPENAIR_DIR/cmake_targets/hss_build
rm -f $OPENAIR_TARGETS/bin/openair-hss openair-hss
if [ "$CLEAN" = "1" ]; then
echo_info "build a clean HSS"
rm -rf obj* m4 .autom4* configure
echo "Cleaning HSS"
rm -rf BUILD
fi
echo_success "Invoking autogen"
./autogen.sh || return 1
mkdir -p objs ; cd objs
echo_success "Invoking configure"
../configure || return 1
if [ -f Makefile ]; then
echo_success "Compiling..."
make -j4
# seems a bug in hss compilation: run make twice to work around
make -j4
if [ $? -ne 0 ]; then
echo_error "Build failed, exiting"
return 1
mkdir -p BUILD
cd ./BUILD
cmake $SOFTMODEM_DIRECTIVES ..
make -j $NUM_CPU openair-hss > $dlog/hss.txt 2>&1
if [ -s openair-hss ] ; then
cp openair-hss $OPENAIR_TARGETS/bin
echo_success "hss compiled"
else
return 0
echo_error "hss compilation failed"
fi
else
echo_error "Configure failed, aborting"
fi
return 1
return $?
}
install_nas_tools() {
cd $1
if [ ! -f .ue.nvram ]; then
echo_success "generate .ue_emm.nvram .ue.nvram"
./ue_data --gen
./nvram --gen
fi
if [ ! -f .usim.nvram ]; then
echo_success "generate .usim.nvram"
./usim_data --gen
./usim --gen
fi
}
......
cmake_targets/tools/exmimo2_2arxg.lime 0 → 100644
View file @ 1a80de79
# this file contains the calibration values to compute the RSSI
# we can use three different gain stages (high, low, med) as well as a gain factor for fine tuning
# the three lines in this file gives the total rx gain in dB for the three gain stages if the rx gain is set to 30dB
# this is for Express MIMO2 without any additional RF frontend
# high gain
103 107 106 104
# med gain
98 101 100 98
# low gain (byp)
94 97 96 94
cmake_targets/tools/init_exmimo2.sh
View file @ 1a80de79
......@@ -24,7 +24,7 @@ load_module() {
sudo insmod $1
}
load_module $OPENAIR_DIR/cmake_targets/bin/openair_rf.ko
load_module $OPENAIR_DIR/targets/bin/openair_rf.ko
sleep 1
if [ ! -e /dev/openair0 ]; then
......@@ -36,7 +36,7 @@ DEVICE=`echo $PCI | awk -F\" '{print $(NF-1)}' | awk '{print $2}'`
DEVICE_SWID=${DEVICE:2:2}
if [ $DEVICE_SWID == '0a' ]; then
echo "Using firware version 10"
$OPENAIR_DIR/cmake_targets/bin/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10
$OPENAIR_DIR/targets/bin/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10
else
echo 'No corresponding firmware found'
return
......
cmake_targets/tools/run_enb_s1_exmimo 0 → 100755
View file @ 1a80de79
#!/bin/bash
################################################################################
# OpenAirInterface
# Copyright(c) 1999 - 2014 Eurecom
#
# OpenAirInterface is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) anylater version.
#
#
# OpenAirInterface is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with OpenAirInterface.The full GNU General Public License is
# included in this distribution in the file called "COPYING". If not,
# see <http://www.gnu.org/licenses/>.
#
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@eurecom.fr
#
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
#
################################################################################
# file run_enb_s1_exmimo
# brief run script for eNB EXMIMO.
# author Lionel GAUTHIER
# company Eurecom
# email: lionel.gauthier@eurecom.fr
################################
# include helper functions
################################
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
source $THIS_SCRIPT_PATH/build_helper
function help()
{
echo_error " "
echo_error "Usage: run_enb_s1_exmimo [OPTION]..."
echo_error "Run the eNB executable, hardware target is EXMIMO."
echo_error " "
echo_error "Options:"
echo_error "Mandatory arguments to long options are mandatory for short options too."
echo_error " -c, -C, --config-file eNB config file (see $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF)"
echo_error " -g, --gdb Run with GDB."
echo_error " -h, --help Print this help."
echo_error " -K, --itti-dump-file ITTI dump file containing all ITTI events occuring during EPC runtime."
echo_error " -H, --hss HSS hostname."
echo_error " -M, --target-dl-mcs Downlink target MCS."
echo_error " -V, --vcd Dump timings of processing in a GTKWave compliant file format."
echo_error " -S, --enable-missed-slot Continue execution in case of missed slot."
echo_error " -T, --target-ul-mcs Uplink target MCS."
echo_error " -x, --xforms Run XFORMS scope windows."
}
function main()
{
local declare -i run_gdb=0
local declare exe_arguments=""
until [ -z "$1" ]
do
case "$1" in
-c | -C | --config-file)
CONFIG_FILE=$2
# may be relative path
if [ -f $(dirname $(readlink -f $0))/$CONFIG_FILE ]; then
CONFIG_FILE=$(dirname $(readlink -f $0))/$CONFIG_FILE
echo "setting config file to: $CONFIG_FILE"
CONFIG_FILE_ACCESS_OK=1
else
# may be absolute path
if [ -f $CONFIG_FILE ]; then
echo "setting config file to: $CONFIG_FILE"
else
echo_fatal "config file $CONFIG_FILE not found"
fi
fi
exe_arguments="$exe_arguments -O $CONFIG_FILE"
shift 2;
;;
-g | --gdb)
run_gdb=1
echo "setting GDB flag to: $GDB"
shift;
;;
-h | --help)
help
shift;
exit 0
;;
-K | --itti-dump-file)
ITTI_DUMP_FILE=$2
# can omit file name if last arg on the line
if [ "x$ITTI_DUMP_FILE" = "x" ]; then
ITTI_DUMP_FILE="/tmp/enb_s1_exmimo_itti.log"
fi
echo "setting ITTI dump file to: $ITTI_DUMP_FILE"
exe_arguments="$exe_arguments -K $ITTI_DUMP_FILE"
shift 2;
;;
-M | --target-dl-mcs)
echo "setting target dl MCS to $2"
exe_arguments="$exe_arguments -m $2"
shift 2;
;;
-V | --vcd)
"setting gtk-wave output"
exe_arguments="$exe_arguments -V /tmp/oai_gtk_wave.vcd"
shift ;
;;
-S | --enable-missed-slot)
echo "setting continue even if missed slot"
exe_arguments="$exe_arguments -S"
shift ;
;;
-T | --target-ul-mcs)
echo "setting target ul MCS to $2"
exe_arguments="$exe_arguments -t $2"
shift 2;
;;
-x | --xforms)
exe_arguments="$exe_arguments -d"
echo "setting xforms to: $XFORMS"
shift;
;;
*)
echo "Unknown option $1"
help
exit 0
;;
esac
done
check_for_root_rights
set_openair_env
cecho "OPENAIR_HOME = $OPENAIR_HOME" $green
cecho "OPENAIR1_DIR = $OPENAIR1_DIR" $green
cecho "OPENAIR2_DIR = $OPENAIR2_DIR" $green
cecho "OPENAIR3_DIR = $OPENAIR3_DIR" $green
cecho "OPENAIRCN_DIR = $OPENAIRCN_DIR" $green
cecho "OPENAIR_TARGETS = $OPENAIR_TARGETS" $green
if [ ! -e $OPENAIR_TARGETS/bin/lte-softmodem ]; then
echo_fatal "Cannot find $OPENAIR_TARGETS/bin/lte-softmodem executable"
fi
if [ ! -e $OPENAIR_TARGETS/bin/updatefw ]; then
echo_fatal "Cannot find $OPENAIR_TARGETS/bin/updatefw executable"
fi
if [ ! -e $OPENAIR_TARGETS/bin/openair_rf.ko ]; then
echo_fatal "Cannot find $OPENAIR_TARGETS/bin/openair_rf.ko kernel module"
fi
for i in `seq 0 64`; do
have_rtfX=`ls /dev/ |grep -c rtf$i`;
if [ "$have_rtfX" -eq 0 ] ; then
$SUDO mknod -m 666 /dev/rtf$i c 150 $i;
fi;
done
$THIS_SCRIPT_PATH/init_exmimo2.sh
if [ $run_gdb -eq 0 ]; then
exec $OPENAIR_TARGETS/bin/lte-softmodem `echo $exe_arguments` 2>&1 > /tmp/gdb_lte_softmodem.stdout.txt
else
touch ~/.gdb_lte_softmodem
chmod 777 ~/.gdb_lte_softmodem
echo "file $OPENAIR_TARGETS/bin/lte-softmodem" > ~/.gdb_lte_softmodem
echo "set args $exe_arguments" >> ~/.gdb_lte_softmodem
echo "run" >> ~/.gdb_lte_softmodem
cat ~/.gdb_lte_softmodem
gdb -n -x ~/.gdb_lte_softmodem 2>&1 > /tmp/gdb_lte_softmodem.stdout.txt
fi
}
main "$@"
cmake_targets/tools/run_epc 0 → 100755
View file @ 1a80de79
#!/bin/bash
################################################################################
# OpenAirInterface
# Copyright(c) 1999 - 2014 Eurecom
#
# OpenAirInterface is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) anylater version.
#
#
# OpenAirInterface is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with OpenAirInterface.The full GNU General Public License is
# included in this distribution in the file called "COPYING". If not,
# see <http://www.gnu.org/licenses/>.
#
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@eurecom.fr
#
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
#
################################################################################
# file run_epc
# brief run script for EPC (MME+SGW-LITE).
# author Lionel GAUTHIER
# company Eurecom
# email: lionel.gauthier@eurecom.fr
################################
# include helper functions
################################
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
source $THIS_SCRIPT_PATH/build_helper
set_openair_env
function help()
{
echo_error " "
echo_error "Usage: run_epc [OPTION]..."
echo_error "Run the EPC executable (MME+SGW-LITE)."
echo_error " "
echo_error "Options:"
echo_error "Mandatory arguments to long options are mandatory for short options too."
echo_error " -g, --gdb Run with GDB."
echo_error " -h, --help Print this help."
echo_error " -K, --itti-dump-file ITTI dump file containing all ITTI events occuring during EPC runtime."
echo_error " -l, --local-enb EPC run on the same eNB host."
echo_error " -v, --verbosity-level Verbosity level (0,1,2)."
echo_error " 0 -> ASN1 XER printf off"
echo_error " 1 -> ASN1 XER printf on and ASN1 debug off"
echo_error " 2 -> ASN1 XER printf on and ASN1 debug on"
}
function main()
{
local -i run_gdb=0
local exe_arguments=" "
local -i epc_local=0
local -r epc_default_config_file="$OPENAIR_TARGETS/bin/epc.conf"
local epc_config_file=$epc_default_config_file
until [ -z "$1" ]
do
case "$1" in
-g | --gdb)
run_gdb=1
echo "setting GDB flag to: $GDB"
shift;
;;
-h | --help)
help
exit 0
;;
-K | --itti-dump-file)
local itti_dump_file=$2
# can omit file name if last arg on the line
if [ "x$itti_dump_file" = "x" ]; then
itti_dump_file="/tmp/epc_itti.log"
else
shift 1;
fi
echo "setting ITTI dump file to: $itti_dump_file"
exe_arguments="$exe_arguments -K $itti_dump_file"
shift 1;
;;
-l | ----local-enb)
epc_local=1
shift;
;;
-v | --verbosity-level)
local verbosity_level=$2
echo "setting verbosity level to: $verbosity_level"
exe_arguments="-v $verbosity_level $exe_arguments"
shift 2;
;;
*)
echo "Unknown option $1"
help
exit 0
;;
esac
done
check_for_root_rights
set_openair_env
cecho "OPENAIR_HOME = $OPENAIR_HOME" $green
cecho "OPENAIR1_DIR = $OPENAIR1_DIR" $green
cecho "OPENAIR2_DIR = $OPENAIR2_DIR" $green
cecho "OPENAIR3_DIR = $OPENAIR3_DIR" $green
cecho "OPENAIRCN_DIR = $OPENAIRCN_DIR" $green
cecho "OPENAIR_TARGETS = $OPENAIR_TARGETS" $green
if [ ! -e $OPENAIR_TARGETS/bin/mme_gw ]; then
echo_fatal "Cannot find $OPENAIR_TARGETS/bin/mme_gw executable, have a look at the output of build_epc executable"
fi
if [ $epc_local -eq 1 ]; then
epc_config_file="$OPENAIR_TARGETS/bin/epc.local.enb.conf"
fi
exe_arguments="-O $epc_config_file $exe_arguments"
if [ $run_gdb -eq 0 ]; then
exec $OPENAIR_TARGETS/bin/mme_gw `echo $exe_arguments` 2>&1
else
touch ~/.gdb_mme_gw
chmod 777 ~/.gdb_mme_gw
echo "file $OPENAIR_TARGETS/bin/mme_gw" > ~/.gdb_mme_gw
echo "set args $exe_arguments " >> ~/.gdb_mme_gw
echo "run" >> ~/.gdb_mme_gw
cat ~/.gdb_mme_gw
gdb -n -x ~/.gdb_mme_gw
fi
}
main "$@"
cmake_targets/tools/run_hss 0 → 100755
View file @ 1a80de79
#!/bin/bash
################################################################################
# OpenAirInterface
# Copyright(c) 1999 - 2014 Eurecom
#
# OpenAirInterface is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) anylater version.
#
#
# OpenAirInterface is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with OpenAirInterface.The full GNU General Public License is
# included in this distribution in the file called "COPYING". If not,
# see <http://www.gnu.org/licenses/>.
#
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@eurecom.fr
#
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
#
################################################################################
# file run_hss
# brief run script for HSS (!EXPERIMENTAL!).
# author Lionel GAUTHIER
# company Eurecom
# email: lionel.gauthier@eurecom.fr
################################
# include helper functions
################################
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
source $THIS_SCRIPT_PATH/build_helper
function help()
{
echo_error " "
echo_error "Usage: run_hss [OPTION]..."
echo_error "Run the HSS executable (experimental)."
echo_error " "
echo_error "Options:"
echo_error "Mandatory arguments to long options are mandatory for short options too."
echo_error " -g, --gdb Run with GDB."
echo_error " -h, --help Print this help."
}
function main()
{
local -i run_gdb=0
local exe_arguments=" -c ./hss.conf"
until [ -z "$1" ]
do
case "$1" in
-g | --gdb)
run_gdb=1
echo "setting GDB flag to: $GDB"
shift;
;;
-h | --help)
help
exit 0
;;
*)
echo "Unknown option $1"
help
exit 0
;;
esac
done
check_for_root_rights
set_openair_env
cecho "OPENAIR_HOME = $OPENAIR_HOME" $green
cecho "OPENAIR1_DIR = $OPENAIR1_DIR" $green
cecho "OPENAIR2_DIR = $OPENAIR2_DIR" $green
cecho "OPENAIR3_DIR = $OPENAIR3_DIR" $green
cecho "OPENAIRCN_DIR = $OPENAIRCN_DIR" $green
cecho "OPENAIR_TARGETS = $OPENAIR_TARGETS" $green
if [ ! -e $OPENAIR_TARGETS/bin/openair-hss ]; then
echo_fatal "Cannot find $OPENAIR_TARGETS/bin/openair-hss executable"
fi
# for file config relative path
cd $OPENAIR_TARGETS/bin
if [ $run_gdb -eq 0 ]; then
exec $OPENAIR_TARGETS/bin/openair-hss `echo $exe_arguments` 2>&1
else
touch ~/.gdb_hss
chmod 777 ~/.gdb_hss
echo "file $OPENAIR_TARGETS/bin/openair-hss" > ~/.gdb_hss
echo "set args $exe_arguments " >> ~/.gdb_hss
echo "run" >> ~/.gdb_hss
cat ~/.gdb_hss
gdb -n -x ~/.gdb_hss 2>&1
fi
}
main "$@"
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment