Skip to content

O
OpenXG-RAN
Commit 7fad4560 authored by Raymond Knopp's avatar Raymond Knopp
Browse files
Options 

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@6612 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 14f403e4
Show whitespace changes
Inline Side-by-side
Showing with 26 additions and 19 deletions
targets/RT/USER/lte-ue.c
View file @ 7fad4560
......@@ -277,7 +277,7 @@ static void *UE_thread_synch(void *arg) {
#endif
}
#ifdef EXMIMO
openair0_config(&openair0_cfg[card],1);
//openair0_config(&openair0_cfg[card],1);
#endif
}
#ifdef USRP
......@@ -357,7 +357,7 @@ static void *UE_thread_synch(void *arg) {
}
#ifdef EXMIMO
openair0_config(&openair0_cfg[card],1);
//openair0_config(&openair0_cfg[card],1);
#endif
}
#ifdef USRP
......@@ -368,7 +368,7 @@ static void *UE_thread_synch(void *arg) {
#endif
break;
case pbch:
printf("Running initial sync\n");
// printf("synch: Running initial sync\n");
// This is a hack to fix a bug when using USRP
memset(PHY_vars_UE_g[0][0]->lte_ue_common_vars.rxdata[0],0,1024);
if (initial_sync(UE,UE->mode)==0) {
......@@ -399,7 +399,7 @@ static void *UE_thread_synch(void *arg) {
LOG_I(HW,"Got synch: hw_slot_offset %d\n",hw_slot_offset);
}
else {
else { // intial_synch
if (openair_daq_vars.freq_offset >= 0) {
openair_daq_vars.freq_offset += 100;
......@@ -408,6 +408,7 @@ static void *UE_thread_synch(void *arg) {
else {
openair_daq_vars.freq_offset *= -1;
}
if (abs(openair_daq_vars.freq_offset) > 7500) {
LOG_I(PHY,"[initial_sync] No cell synchronization found, abandoning\n");
mac_xface->macphy_exit("No cell synchronization found, abandoning");
......@@ -421,8 +422,9 @@ static void *UE_thread_synch(void *arg) {
for (i=0; i<openair0_cfg[card].rx_num_channels; i++) {
openair0_cfg[card].rx_freq[i] = downlink_frequency[card][i]+openair_daq_vars.freq_offset;
openair0_cfg[card].tx_freq[i] = downlink_frequency[card][i]+uplink_frequency_offset[card][i]+openair_daq_vars.freq_offset;
openair0_cfg[card].rx_gain[i] = UE->rx_total_gain_dB-USRP_GAIN_OFFSET; // 65 calibrated for USRP B210 @ 2.6 GHz
#ifdef USRP
openair0_cfg[card].rx_gain[i] = UE->rx_total_gain_dB-USRP_GAIN_OFFSET; // 65 calibrated for USRP B210 @ 2.6 GHz
switch(UE->lte_frame_parms.N_RB_DL) {
case 6:
openair0_cfg[card].rx_gain[i] -= 12;
......@@ -437,11 +439,12 @@ static void *UE_thread_synch(void *arg) {
printf("Unknown number of RBs %d\n",UE->lte_frame_parms.N_RB_DL);
break;
}
printf("UE synch: setting RX gain (%d,%d) to %d\n",card,i,openair0_cfg[card].rx_gain[i]);
// printf("UE synch: setting RX gain (%d,%d) to %d\n",card,i,openair0_cfg[card].rx_gain[i]);
#endif
}
#ifdef EXMIMO
openair0_config(&openair0_cfg[card],1);
//openair0_config(&openair0_cfg[card],1);
//rt_sleep_ns(FRAME_PERIOD);
#endif
}
#ifdef USRP
......@@ -450,8 +453,6 @@ static void *UE_thread_synch(void *arg) {
// openair0_set_gains(&openair0,&openair0_cfg[0]);
#endif
#else
#endif
......@@ -459,6 +460,7 @@ static void *UE_thread_synch(void *arg) {
// openair0_dump_config(&openair0_cfg[0],UE_flag);
// rt_sleep_ns(FRAME_PERIOD);
} // freq_offset
} // initial_sync=0
break;
......@@ -467,7 +469,7 @@ static void *UE_thread_synch(void *arg) {
break;
}
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_SYNCH,0);
printf("Finished synch : Locking synch mutex (thread_sync)\n");
if (pthread_mutex_lock(&UE->mutex_synch) != 0) {
printf("[openair][SCHED][eNB] error locking mutex for UE synch\n");
}
......@@ -653,7 +655,7 @@ static void *UE_thread_rx(void *arg) {
// This creates a 1ms reservation every 10ms period
attr.sched_policy = SCHED_DEADLINE;
attr.sched_runtime = 1 * 800000; // each rx thread requires 1ms to finish its job
attr.sched_runtime = 1 * 500000; // each rx thread requires 1ms to finish its job
attr.sched_deadline =1 * 1000000; // each rx thread will finish within 1ms
attr.sched_period = 1 * 1000000; // each rx thread has a period of 1ms from the starting point
......@@ -1111,7 +1113,7 @@ void *UE_thread(void *arg) {
// This creates a .25 ms reservation
attr.sched_policy = SCHED_DEADLINE;
attr.sched_runtime = 0.25 * 1000000;
attr.sched_runtime = 0.1 * 1000000;
attr.sched_deadline = 0.25 * 1000000;
attr.sched_period = 0.5 * 1000000;
......@@ -1339,15 +1341,19 @@ void *UE_thread(void *arg) {
// wait until we can lock mutex_synch
printf("Locking mutex_synch (UE_thread)\n");
if (pthread_mutex_lock(&UE->mutex_synch) != 0) {
LOG_E(PHY,"[SCHED][UE] error locking mutex for UE initial synch thread\n");
exit_fun("noting to add");
}
else {
printf("Before getting frame IC %d (UE_thread)\n",UE->instance_cnt_synch);
if (UE->instance_cnt_synch < 0) {
wait_sync_cnt=0;
openair0_get_frame(0);
rt_sleep_ns(FRAME_PERIOD);
// increment instance count for sync thread
UE->instance_cnt_synch++;
pthread_mutex_unlock(&UE->mutex_synch);
......@@ -1359,6 +1365,7 @@ void *UE_thread(void *arg) {
else {
wait_sync_cnt++;
pthread_mutex_unlock(&UE->mutex_synch);
if (wait_sync_cnt>1000)
exit_fun("waiting to long for synch thread");
else
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment