clean useless log

openair1/PHY/LTE_TRANSPORT/SIB_NB_IoT.c

@@ -229,7 +229,7 @@ int generate_NDLSCH_NB_IoT(NB_IoT_eNB_NDLSCH_t 	  *RAR,
     	int G = get_G_NB_IoT(frame_parms);
     	uint8_t Nsf = RAR->number_of_subframes_for_resource_assignment;
 
-        LOG_I(PHY,"[Frame: %d][Subframe: %d]sent RAR, rep : %d, counter_rep:%d, Num_res:%d\n",frame,subframe,rep,counter_rep,Nsf);
+        //LOG_I(PHY,"[Frame: %d][Subframe: %d]sent RAR, rep : %d, counter_rep:%d, Num_res:%d\n",frame,subframe,rep,counter_rep,Nsf);
 
         if( (counter_rep == rep) && (counter_sf_rep == 0) && (pointer_to_sf == 0) )
         {
@@ -344,7 +344,7 @@ int generate_NPDCCH_NB_IoT(NB_IoT_eNB_NPDCCH_t 	  *DCI,
 
 		    if( DCI->active[i] == 1)
 		    {
-                LOG_I(PHY,"[Frame: %d][Subframe: %d]sent DCI\n",frame,subframe);
+                //LOG_I(PHY,"[Frame: %d][Subframe: %d]sent DCI\n",frame,subframe);
 		    	uint8_t  *DCI_pdu  = DCI->pdu[i];
 			 	uint32_t rep =  DCI->dci_repetitions[i];         /// repetition number
 			 	uint8_t  eutra_control_region = 3;

openair1/PHY/LTE_TRANSPORT/dci_tools_NB_IoT.c

@@ -286,7 +286,7 @@ int generate_eNB_dlsch_params_from_dci_NB_IoT(PHY_VARS_eNB      *eNB,
     ((DCIN1_RAR_t *)DLSCH_DCI_NB_IoT)->HARQackRes     =HARQackRes;
     ((DCIN1_RAR_t *)DLSCH_DCI_NB_IoT)->DCIRep         =DCIRep;
 
-    printf("DUMP: DCI N1 RAR : type = %d, orderIndicator = %d, Sched_delay = %d, ResAssign = %d, mcs = %d, RepNum = %d, ndi = %d, HARQackRes = %d, DCIRep = %d\n", type, orderIndicator, Sched_delay, ResAssign, mcs, RepNum, ndi, HARQackRes, DCIRep);
+    //printf("DUMP: DCI N1 RAR : type = %d, orderIndicator = %d, Sched_delay = %d, ResAssign = %d, mcs = %d, RepNum = %d, ndi = %d, HARQackRes = %d, DCIRep = %d\n", type, orderIndicator, Sched_delay, ResAssign, mcs, RepNum, ndi, HARQackRes, DCIRep);
     //add_dci_NB_IoT(eNB->DCI_pdu,DLSCH_DCI_NB_IoT,rnti,sizeof(DCIN1_RAR_t),aggregation,sizeof_DCIN1_RAR_t,DCIFormatN1_RAR, npdcch_start_symbol);
 
 
@@ -307,7 +307,7 @@ int generate_eNB_dlsch_params_from_dci_NB_IoT(PHY_VARS_eNB      *eNB,
     ndlcch->repetition_number[ncce_index]        = Irep_to_Nrep[RepNum];                             // repetition number for NPDSCH
     ndlcch->dci_repetitions[ncce_index]          = DCIrep_to_real_rep(DCIRep,4);        ////??????? should be repalce by the value in spec table 16.6-3, check also Rmax
 
-    printf("dci_repetitions: %d, A = %d\n",ndlcch->dci_repetitions[ncce_index],ndlcch->A[ncce_index]);
+    //printf("dci_repetitions: %d, A = %d\n",ndlcch->dci_repetitions[ncce_index],ndlcch->A[ncce_index]);
 
     ndlcch->modulation[ncce_index]               = 2; //QPSK
     //// ////////////////////////////////////////////////if(ndlcch->round == 0) //this should be set from initialization (init-lte)

openair1/SCHED/IF_Module_L1_primitives_NB_IoT.c

@@ -218,13 +218,13 @@ void handle_nfapi_dlsch_pdu_NB_IoT(PHY_VARS_eNB *eNB,
 
 		  eNB->ndlsch_RAR->harq_process->pdu 		= sdu;
 		  
-		  printf("RAR PDU content:");
+		  /*printf("RAR PDU content:");
 		  int fori = 0;
 		  for(fori=0;fori<7;fori++)
 		  {
 			printf("%d ",eNB->ndlsch_RAR->harq_process->pdu[fori]);
 		  }
-		  printf("\n");
+		  printf("\n");*/
 			
 		  eNB->ndlsch_RAR->npdsch_start_symbol 		= rel13->start_symbol;
 		  eNB->ndlsch_RAR->active 					= 1;
@@ -241,7 +241,7 @@ void handle_nfapi_dlsch_pdu_NB_IoT(PHY_VARS_eNB *eNB,
 		  eNB->ndlsch_RAR->counter_repetition_number       = Irep_to_Nrep_x[rel13->repetition_number];
 		  eNB->ndlsch_RAR->counter_current_sf_repetition   = 0;
 		  eNB->ndlsch_RAR->pointer_to_subframe             = 0;
-		  printf("number of subframe : %d, Rep of subframe : %d\n",eNB->ndlsch_RAR->number_of_subframes_for_resource_assignment,eNB->ndlsch_RAR->counter_repetition_number);
+		  //printf("number of subframe : %d, Rep of subframe : %d\n",eNB->ndlsch_RAR->number_of_subframes_for_resource_assignment,eNB->ndlsch_RAR->counter_repetition_number);
 
 	  }
 	  else
@@ -440,6 +440,7 @@ void schedule_response_NB_IoT(Sched_Rsp_NB_IoT_t *Sched_INFO)
 		   * diferent from the DL_CONFIG one)
 		   *
 		   */
+	  		LOG_I(PHY,"IF module proceed UL config NULSCH pdu\n");
 		  break;
 	  case NFAPI_UL_CONFIG_NRACH_PDU_TYPE:
 		  //TODO just for update the nprach  configuration (given at the beginning through phy_config_sib2)

openair1/SCHED/phy_procedures_lte_eNb_NB_IoT.c

@@ -788,7 +788,7 @@ void generate_eNB_dlsch_params_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t * proc,n
 
           npdcch               =  eNB->npdcch_DCI;
            
-          LOG_I(PHY,"Generating pdcch params for DCIN1 RAR and packing DCI\n");
+          LOG_D(PHY,"Generating pdcch params for DCIN1 RAR and packing DCI\n");
           //LOG_I(PHY,"Rep of DCI is : %d\n",DCI_Content->DCIN1_RAR.RepNum);
 
           //LOG_I(PHY,"Generating dlsch params for RA_RNTI and packing DCI\n");

openair2/LAYER2/MAC/output_handler_NB_IoT.c

@@ -273,7 +273,7 @@ int output_handler(eNB_MAC_INST_NB_IoT *mac_inst, module_id_t module_id, int CC_
 			if(schedule_result_list_UL->channel == NPUSCH)
 			{
 				//LOG_D(MAC,"first UL \n");
-				LOG_I(MAC,"NB-IoT fill ul_config_pdu\n");
+				LOG_D(MAC,"[hypersfn:%2d][frame:%2d][subframe:%2d]NB-IoT fill UL config\n",hypersfn,frame,subframe);
 				//SCHED_info->UL_req = (nfapi_ul_config_request_t *)malloc(sizeof(nfapi_ul_config_request_t));
 				//SCHED_info->UL_req->ul_config_request_body.number_of_pdus = 0;
 				//SCHED_info->UL_req->ul_config_request_body.ul_config_pdu_list = (nfapi_ul_config_request_pdu_t *)malloc(5 * sizeof(nfapi_ul_config_request_pdu_t));