Skip to content

O
OpenXG-RAN
Commit 9deb0ed0 authored by Francesco Mani's avatar Francesco Mani
Browse files
Options

Merge branch 'develop' into NR_RRC_PRACH_procedures

parents 6f87d474 c918f1d8
Hide whitespace changes
Inline Side-by-side
Showing with 94 additions and 87 deletions
ci-scripts/runTestOnVM.sh
View file @ 9deb0ed0
...@@ -342,34 +342,8 @@ function check_iperf { ...@@ -342,34 +342,8 @@ function check_iperf {
local FILE_COMPLETE=`egrep -c "Server Report" ${LOC_BASE_LOG}_client.txt` local FILE_COMPLETE=`egrep -c "Server Report" ${LOC_BASE_LOG}_client.txt`
if [ $FILE_COMPLETE -eq 0 ] if [ $FILE_COMPLETE -eq 0 ]
then then
# This part will become obsolete once we have UL IPERF_STATUS=-1
if [[ $LOC_IS_RF_SIM -eq 1 ]] && [[ $LOC_IS_NR -eq 1 ]] echo "File Report not found"
then
echo "no UL integration right now --> normal to have no server report"
if [ -f ${LOC_BASE_LOG}_server.txt ]
then
local EFFECTIVE_BANDWIDTH=`tail -n1 ${LOC_BASE_LOG}_server.txt | sed -e "s#^.*MBytes *##" -e "s#^.*KBytes *##" -e "s#sec.*#sec#"`
if [[ $2 =~ .*K.* ]]
then
local BW_PREFIX="K"
else
local BW_PREFIX="M"
fi
if [[ $EFFECTIVE_BANDWIDTH =~ .*${LOC_REQ_BW}.*${BW_PREFIX}bits.* ]] || [[ $EFFECTIVE_BANDWIDTH =~ .*${LOC_REQ_BW_MINUS_ONE}.*${BW_PREFIX}bits.* ]]
then
echo "got requested DL bandwidth: $EFFECTIVE_BANDWIDTH"
else
echo "got LESS than requested DL bandwidth: $EFFECTIVE_BANDWIDTH"
IPERF_STATUS=-1
fi
else
IPERF_STATUS=-1
echo "Server File Report not found"
fi
else
IPERF_STATUS=-1
echo "File Report not found"
fi
else else
if [ `egrep -c "Mbits/sec" ${LOC_BASE_LOG}_client.txt` -ne 0 ] if [ `egrep -c "Mbits/sec" ${LOC_BASE_LOG}_client.txt` -ne 0 ]
then then
...@@ -2044,81 +2018,117 @@ function run_test_on_vm { ...@@ -2044,81 +2018,117 @@ function run_test_on_vm {
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]] if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]]
then then
NR_STATUS=0
PING_STATUS=0
IPERF_STATUS=0
CN_CONFIG="noS1" CN_CONFIG="noS1"
CONF_FILE=gnb.band78.tm1.106PRB.usrpn300.conf CONF_FILE=gnb.band78.tm1.106PRB.usrpn300.conf
S1_NOS1_CFG=0 S1_NOS1_CFG=0
PRB=106 PRB=106
FREQUENCY=3510 FREQUENCY=3510
local try_cnt="0"
NR_STATUS=0
######### start of loop ######### start of loop
while [ $try_cnt -lt 5 ]
do
SYNC_STATUS=0
PING_STATUS=0
IPERF_STATUS=0
echo "############################################################" echo "############################################################"
echo "${CN_CONFIG} : Starting the gNB" echo "${CN_CONFIG} : Starting the gNB"
echo "############################################################" echo "############################################################"
CURRENT_GNB_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_gnb.log CURRENT_GNB_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_gnb.log
start_rf_sim_gnb $GNB_VM_CMDS "$GNB_VM_IP_ADDR" $CURRENT_GNB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG start_rf_sim_gnb $GNB_VM_CMDS "$GNB_VM_IP_ADDR" $CURRENT_GNB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG
echo "############################################################" echo "############################################################"
echo "${CN_CONFIG} : Starting the NR-UE" echo "${CN_CONFIG} : Starting the NR-UE"
echo "############################################################" echo "############################################################"
CURRENT_NR_UE_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ue.log CURRENT_NR_UE_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ue.log
start_rf_sim_nr_ue $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $GNB_VM_IP_ADDR $CURRENT_NR_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG start_rf_sim_nr_ue $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $GNB_VM_IP_ADDR $CURRENT_NR_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG
if [ $NR_UE_SYNC -eq 0 ] if [ $NR_UE_SYNC -eq 0 ]
then then
echo "Problem w/ gNB and NR-UE not syncing" echo "Problem w/ gNB and NR-UE not syncing"
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2 terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1 terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC SYNC_STATUS=-1
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC try_cnt=$[$try_cnt+1]
echo "5G-NR RFSIM seems to FAIL" continue
echo "5G-NR: TEST_KO" >> $ARCHIVES_LOC/test_final_status.log fi
STATUS=-1
return
fi
echo "############################################################" echo "############################################################"
echo "${CN_CONFIG} : iperf DL -- NR-UE is server and gNB is client" echo "${CN_CONFIG} : Pinging the gNB from NR-UE"
echo "############################################################" echo "############################################################"
THROUGHPUT="30K" get_enb_noS1_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR
CURR_IPERF_LOG_BASE=tdd_${PRB}prb_${CN_CONFIG}_iperf_dl PING_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ping_gnb_from_nrue.log
get_enb_noS1_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR ping_epc_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $ENB_IP_ADDR $PING_LOG_FILE 1 0
get_ue_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 1 scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
generic_iperf $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $UE_IP_ADDR $GNB_VM_CMDS $GNB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 1 0 check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE $THROUGHPUT
echo "############################################################" echo "############################################################"
echo "${CN_CONFIG} : iperf UL -- gNB is server and NR-UE is client" echo "${CN_CONFIG} : Pinging the NR-UE from gNB"
echo "############################################################" echo "############################################################"
THROUGHPUT="30K" get_ue_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 1
CURR_IPERF_LOG_BASE=tdd_${PRB}prb_${CN_CONFIG}_iperf_ul PING_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ping_from_gnb_nrue.log
get_enb_noS1_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR ping_enb_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
get_ue_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 1 scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
generic_iperf $GNB_VM_CMDS $GNB_VM_IP_ADDR $ENB_IP_ADDR $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 1 0 check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE $THROUGHPUT
echo "############################################################" echo "############################################################"
echo "${CN_CONFIG} : Terminate gNB/NR-UE simulators" echo "${CN_CONFIG} : iperf DL -- NR-UE is server and gNB is client"
echo "############################################################" echo "############################################################"
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2 THROUGHPUT="30K"
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1 CURR_IPERF_LOG_BASE=tdd_${PRB}prb_${CN_CONFIG}_iperf_dl
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC get_enb_noS1_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC get_ue_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 1
generic_iperf $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $UE_IP_ADDR $GNB_VM_CMDS $GNB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE $THROUGHPUT
if [ $IPERF_STATUS -ne 0 ]
then
echo "DL test not OK"
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
try_cnt=$[$try_cnt+1]
continue
fi
echo "############################################################"
echo "${CN_CONFIG} : iperf UL -- gNB is server and NR-UE is client"
echo "############################################################"
THROUGHPUT="30K"
CURR_IPERF_LOG_BASE=tdd_${PRB}prb_${CN_CONFIG}_iperf_ul
get_enb_noS1_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR
get_ue_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 1
generic_iperf $GNB_VM_CMDS $GNB_VM_IP_ADDR $ENB_IP_ADDR $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE $THROUGHPUT
echo "############################################################"
echo "${CN_CONFIG} : Terminate gNB/NR-UE simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
if [ $IPERF_STATUS -ne 0 ]
then
echo "UL test not OK"
try_cnt=$[$try_cnt+1]
else
try_cnt=$[$try_cnt+10]
fi
done
######### end of loop ######### end of loop
full_l2_sim_destroy full_l2_sim_destroy
echo "############################################################" echo "############################################################"
echo "Checking run status" echo "Checking run status"
echo "############################################################" echo "############################################################"
if [ $SYNC_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $PING_STATUS -ne 0 ]; then NR_STATUS=-1; fi if [ $PING_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $IPERF_STATUS -ne 0 ]; then NR_STATUS=-1; fi if [ $IPERF_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $NR_STATUS -eq 0 ] if [ $NR_STATUS -eq 0 ]
......
openair2/LAYER2/nr_rlc/nr_rlc_oai_api.c
View file @ 9deb0ed0
...@@ -123,10 +123,7 @@ tbs_size_t mac_rlc_data_req( ...@@ -123,10 +123,7 @@ tbs_size_t mac_rlc_data_req(
rb->set_time(rb, nr_rlc_current_time); rb->set_time(rb, nr_rlc_current_time);
/* UE does not seem to use saved_status_ind_tb_size */ /* UE does not seem to use saved_status_ind_tb_size */
is_enb = nr_rlc_manager_get_enb_flag(nr_rlc_ue_manager); is_enb = nr_rlc_manager_get_enb_flag(nr_rlc_ue_manager);
if (is_enb) maxsize = tb_sizeP;
maxsize = ue->saved_status_ind_tb_size[channel_idP - 1];
else
maxsize = tb_sizeP;
ret = rb->generate_pdu(rb, buffer_pP, maxsize); ret = rb->generate_pdu(rb, buffer_pP, maxsize);
} else { } else {
LOG_E(RLC, "%s:%d:%s: fatal: data req for unknown RB\n", __FILE__, __LINE__, __FUNCTION__); LOG_E(RLC, "%s:%d:%s: fatal: data req for unknown RB\n", __FILE__, __LINE__, __FUNCTION__);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment