Commit a4361e32 authored by Raphael Defosseux's avatar Raphael Defosseux

CI: adding LTE-M testing support

Signed-off-by: default avatarRaphael Defosseux <raphael.defosseux@eurecom.fr>
parent 22e13cb6
...@@ -13,9 +13,9 @@ eNBs = ...@@ -13,9 +13,9 @@ eNBs =
eNB_name = "eNB_Eurecom_LTEBox"; eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values // Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1"; tracking_area_code = 1;
plmn_list = ( { mcc = 208; mnc = 93; mnc_length = 2;} ); plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2;} );
tr_s_preference = "local_mac" tr_s_preference = "local_mac"
...@@ -48,10 +48,10 @@ eNBs = ...@@ -48,10 +48,10 @@ eNBs =
prach_zero_correlation = 1; prach_zero_correlation = 1;
prach_freq_offset = 1; prach_freq_offset = 1;
pucch_delta_shift = 1; pucch_delta_shift = 1;
pucch_nRB_CQI = 1; pucch_nRB_CQI = 0;
pucch_nCS_AN = 0; pucch_nCS_AN = 0;
pucch_n1_AN = 32; pucch_n1_AN = 0;
pdsch_referenceSignalPower = -27; pdsch_referenceSignalPower = -24;
pdsch_p_b = 0; pdsch_p_b = 0;
pusch_n_SB = 1; pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE"; pusch_enable64QAM = "DISABLE";
...@@ -190,7 +190,7 @@ eNBs = ...@@ -190,7 +190,7 @@ eNBs =
prach_freq_offset = 1; prach_freq_offset = 1;
#PDSCH Config Common #PDSCH Config Common
pdsch_referenceSignalPower = -27 pdsch_referenceSignalPower = -24
pdsch_p_b = 0; pdsch_p_b = 0;
...@@ -208,7 +208,7 @@ eNBs = ...@@ -208,7 +208,7 @@ eNBs =
pucch_delta_shift = 1; pucch_delta_shift = 1;
pucch_nRB_CQI = 0; pucch_nRB_CQI = 0;
pucch_nCS_AN = 0; pucch_nCS_AN = 0;
pucch_n1_AN = 32; pucch_n1_AN = 0;
pusch_p0_Nominal = -96; pusch_p0_Nominal = -96;
pusch_alpha = "AL1"; pusch_alpha = "AL1";
...@@ -262,7 +262,7 @@ eNBs = ...@@ -262,7 +262,7 @@ eNBs =
n1PUCCH_AN_InfoList_r13 = n1PUCCH_AN_InfoList_r13 =
( (
{ {
pucch_info_value = 0; pucch_info_value = 33;
} }
); );
...@@ -417,12 +417,31 @@ RUs = ( ...@@ -417,12 +417,31 @@ RUs = (
att_tx = 0 att_tx = 0
att_rx = 0; att_rx = 0;
bands = [13]; bands = [13];
max_pdschReferenceSignalPower = -27; max_pdschReferenceSignalPower = -24;
max_rxgain = 125; max_rxgain = 110;
eNB_instances = [0]; eNB_instances = [0];
} }
); );
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
NETWORK_CONTROLLER :
{
FLEXRAN_ENABLED = "no";
FLEXRAN_INTERFACE_NAME = "lo";
FLEXRAN_IPV4_ADDRESS = "127.0.0.1";
FLEXRAN_PORT = 2210;
FLEXRAN_CACHE = "/mnt/oai_agent_cache";
FLEXRAN_AWAIT_RECONF = "no";
};
log_config : log_config :
{ {
global_log_level ="info"; global_log_level ="info";
......
This diff is collapsed.
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>build-tab</htmlTabRef>
<htmlTabName>Build</htmlTabName>
<htmlTabIcon>wrench</htmlTabIcon>
<TestCaseRequestedList>
010101
050101 060101 070101
</TestCaseRequestedList>
<TestCaseExclusionList>
</TestCaseExclusionList>
<testCase id="010101">
<class>Build_eNB</class>
<desc>Build eNB (USRP)</desc>
<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
</testCase>
<testCase id="050101">
<class>Initialize_HSS</class>
<desc>Initialize HSS</desc>
</testCase>
<testCase id="060101">
<class>Initialize_MME</class>
<desc>Initialize MME</desc>
</testCase>
<testCase id="070101">
<class>Initialize_SPGW</class>
<desc>Initialize SPGW</desc>
</testCase>
</testCaseList>
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>epc-closure</htmlTabRef>
<htmlTabName>EPC-Closure</htmlTabName>
<htmlTabIcon>log-out</htmlTabIcon>
<TestCaseRequestedList>
050201 060201 070201
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="050201">
<class>Terminate_HSS</class>
<desc>Terminate HSS</desc>
</testCase>
<testCase id="060201">
<class>Terminate_MME</class>
<desc>Terminate MME</desc>
</testCase>
<testCase id="070201">
<class>Terminate_SPGW</class>
<desc>Terminate SPGW</desc>
</testCase>
</testCaseList>
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>test-10-tm1</htmlTabRef>
<htmlTabName>Test-10MHz-TM1</htmlTabName>
<htmlTabIcon>tasks</htmlTabIcon>
<TestCaseRequestedList>
040102
030121 000001 040302 000001 040502 000001 040402 040202 000001 030201
</TestCaseRequestedList>
<TestCaseExclusionList>
</TestCaseExclusionList>
<testCase id="000001">
<class>IdleSleep</class>
<desc>Waiting for a moment...</desc>
<idle_sleep_time_in_sec>15</idle_sleep_time_in_sec>
</testCase>
<testCase id="030121">
<class>Initialize_eNB</class>
<desc>Initialize eNB (FDD/Band13/10MHz)</desc>
<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band13.tm1.50PRB.emtc.conf</Initialize_eNB_args>
</testCase>
<testCase id="030201">
<class>Terminate_eNB</class>
<desc>Terminate eNB</desc>
</testCase>
<testCase id="040102">
<class>Initialize_CatM_module</class>
<desc>Initialize CAT-M Module</desc>
</testCase>
<testCase id="040202">
<class>Terminate_CatM_module</class>
<desc>Terminate CAT-M Module</desc>
</testCase>
<testCase id="040302">
<class>Attach_CatM_module</class>
<desc>Attach CAT-M Module</desc>
</testCase>
<testCase id="040402">
<class>Detach_CatM_module</class>
<desc>Detach CAT-M Module</desc>
</testCase>
<testCase id="040502">
<class>Ping_CatM_module</class>
<desc>ping (10MHz - 20 sec)</desc>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
</testCaseList>
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment