fixing warnings

executables/nr-softmodem-common.h

@@ -68,11 +68,11 @@
 #define CONFIG_HLP_SOFTS         "Enable soft scope and L1 and L2 stats (Xforms)\n"
 #define CONFIG_HLP_EXMCAL        "Calibrate the EXMIMO borad, available files: exmimo2_2arxg.lime exmimo2_2brxg.lime \n"
 #define CONFIG_HLP_ITTIL         "Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n"
-#define CONFIG_HLP_DLMCS         "Set the maximum downlink MCS\n"
+//#define CONFIG_HLP_DLMCS         "Set the maximum downlink MCS\n"
 #define CONFIG_HLP_STMON         "Enable processing timing measurement of lte softmodem on per subframe basis \n"
 #define CONFIG_HLP_PRB           "Set the PRB, valid values: 6, 25, 50, 100  \n"
 #define CONFIG_HLP_MSLOTS        "Skip the missed slots/subframes \n"
-#define CONFIG_HLP_ULMCS         "Set the maximum uplink MCS\n"
+//#define CONFIG_HLP_ULMCS         "Set the maximum uplink MCS\n"
 #define CONFIG_HLP_TDD           "Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n"
 #define CONFIG_HLP_UE            "Set the lte softmodem as a UE\n"
 #define CONFIG_HLP_L2MONW        "Enable L2 wireshark messages on localhost \n"

executables/softmodem-common.h

@@ -67,13 +67,13 @@ extern "C"
 #define CONFIG_HLP_SOFTS         "Enable soft scope and L1 and L2 stats (Xforms)\n"
 #define CONFIG_HLP_EXMCAL        "Calibrate the EXMIMO borad, available files: exmimo2_2arxg.lime exmimo2_2brxg.lime \n"
 #define CONFIG_HLP_ITTIL         "Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n"
-//#define CONFIG_HLP_DLMCS         "Set the downlink MCS\n"
+#define CONFIG_HLP_DLMCS         "Set the downlink MCS\n"
 #define CONFIG_HLP_STMON         "Enable processing timing measurement of lte softmodem on per subframe basis \n"
 
 
 //#define CONFIG_HLP_NUMUES        "Set the number of UEs for the emulation"
 #define CONFIG_HLP_MSLOTS        "Skip the missed slots/subframes \n"
-//#define CONFIG_HLP_ULMCS         "Set the uplink MCS\n"
+#define CONFIG_HLP_ULMCS         "Set the uplink MCS\n"
 
 #define CONFIG_HLP_UE            "Set the lte softmodem as a UE\n"
 #define CONFIG_HLP_TQFS          "Apply three-quarter of sampling frequency, 23.04 Msps to reduce the data rate on USB/PCIe transfers (only valid for 20 MHz)\n"
@@ -135,8 +135,8 @@ extern "C"
     {"basicsim",             CONFIG_HLP_RFSIM,        PARAMFLAG_BOOL, uptr:&basicsim,                     defintval:0,           TYPE_INT,    0},                     \
     {"nokrnmod",             CONFIG_HLP_NOKRNMOD,     PARAMFLAG_BOOL, uptr:&nokrnmod,                     defintval:0,           TYPE_INT,    0},                     \
     {"nbiot-disable",        CONFIG_HLP_DISABLNBIOT,  PARAMFLAG_BOOL, uptr:&nonbiot,                      defuintval:0,          TYPE_INT,    0},                     \
-    {"m" ,                   CONFIG_HLP_DLMCS,          0,            iptr:&target_dl_mcs,                defintval:9,           TYPE_INT,    0},                     \
-    {"u" ,                   CONFIG_HLP_ULMCS,          0,            iptr:&target_ul_mcs,                defintval:9,           TYPE_INT,    0},                     \
+    {"m" ,                   CONFIG_HLP_DLMCS,          0,            uptr:&target_dl_mcs,                defintval:9,           TYPE_INT,    0},                     \
+    {"u" ,                   CONFIG_HLP_ULMCS,          0,            uptr:&target_ul_mcs,                defintval:9,           TYPE_INT,    0},                     \
   }
 
   

openair1/PHY/NR_TRANSPORT/nr_ulsch_decoding.c

@@ -383,7 +383,7 @@ uint32_t nr_processULSegment(void* arg) {
 
     LOG_E(PHY,"ulsch_decoding.c: Problem in rate_matching\n");
     rdata->decodeIterations = max_ldpc_iterations + 1;
-    return;
+    return 1;
   } else {
     stop_meas(&phy_vars_gNB->ulsch_rate_unmatching_stats);
   }
@@ -467,7 +467,6 @@ uint32_t nr_ulsch_decoding(PHY_VARS_gNB *phy_vars_gNB,
                            uint32_t G) {
 
   uint32_t A;
-  uint32_t ret;
   uint32_t r;
   uint32_t r_offset;
   uint32_t offset;
@@ -494,7 +493,7 @@ uint32_t nr_ulsch_decoding(PHY_VARS_gNB *phy_vars_gNB,
 
   if (!harq_process) {
     LOG_E(PHY,"ulsch_decoding.c: NULL harq_process pointer\n");
-    return; 
+    return 1; 
   }
 
   double   Coderate = 0.0;
@@ -509,7 +508,7 @@ uint32_t nr_ulsch_decoding(PHY_VARS_gNB *phy_vars_gNB,
 
    if (!ulsch_llr) {
     LOG_E(PHY,"ulsch_decoding.c: NULL ulsch_llr pointer\n");
-    return;
+    return 1;
   }
 
   VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_gNB_ULSCH_DECODING,1);
@@ -617,7 +616,7 @@ uint32_t nr_ulsch_decoding(PHY_VARS_gNB *phy_vars_gNB,
 
   if (harq_process->C > a_segments) {
     LOG_E(PHY,"Illegal harq_process->C %d > %d\n",harq_process->C,a_segments);
-    return;
+    return 1;
   }
 #ifdef DEBUG_ULSCH_DECODING
   printf("Segmentation: C %d, K %d\n",harq_process->C,harq_process->K);
@@ -659,5 +658,5 @@ uint32_t nr_ulsch_decoding(PHY_VARS_gNB *phy_vars_gNB,
     offset += (Kr_bytes - (harq_process->F>>3) - ((harq_process->C>1)?3:0));
     //////////////////////////////////////////////////////////////////////////////////////////
   }
-  return;
+  return 1;
 }

openair1/SCHED_NR/phy_procedures_nr_gNB.c

@@ -281,7 +281,6 @@ void nr_ulsch_procedures(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx, int ULSCH
   NR_DL_FRAME_PARMS *frame_parms = &gNB->frame_parms;
   nfapi_nr_pusch_pdu_t *pusch_pdu = &gNB->ulsch[ULSCH_id][0]->harq_processes[harq_pid]->ulsch_pdu;
   
-  uint8_t ret;
   uint8_t l, number_dmrs_symbols = 0;
   uint32_t G;
   uint16_t start_symbol, number_symbols, nb_re_dmrs;

openair2/LAYER2/MAC/eNB_scheduler_mch.c

@@ -211,7 +211,7 @@ schedule_MBMS_NFAPI(module_id_t module_idP, uint8_t CC_id, frame_t frameP,
 			msi_pos++;
 		   while((non_mbsfn_SubframeConfig & (0x100 >> msi_pos)) == (0x100>>msi_pos))
 			msi_pos++;
-		   	mbms_mch_i=0;
+		   mbms_mch_i=0;
 
 		   if((subframeP==0)){
 		   	x=0;