reducing max uplink MCS

openair1/SCHED/phy_mac_stub.c

@@ -226,8 +226,9 @@ void fill_dci(DCI_PDU *DCI_pdu,PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc)
       memcpy((void*)&DCI_pdu->dci_alloc[0].dci_pdu[0],(void *)&DLSCH_alloc_pdu1,sizeof(DCI2_5MHz_2A_M10PRB_TDD_t));
     break;
     */
-
+  case 8:
   case 9:
+  case 0:
     DCI_pdu->Num_ue_spec_dci = 1;
 
     //user 1
@@ -244,7 +245,7 @@ void fill_dci(DCI_PDU *DCI_pdu,PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc)
 
     UL_alloc_pdu.type    = 0;
     UL_alloc_pdu.hopping = 0;
-    UL_alloc_pdu.rballoc = computeRIV(25,2,eNB->ue_ul_nb_rb);
+    UL_alloc_pdu.rballoc = computeRIV(25,0,25);
     UL_alloc_pdu.mcs     = eNB->target_ue_ul_mcs;
     UL_alloc_pdu.ndi     = proc->frame_tx&1;
     UL_alloc_pdu.TPC     = 0;
@@ -254,8 +255,7 @@ void fill_dci(DCI_PDU *DCI_pdu,PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc)
     memcpy((void*)&DCI_pdu->dci_alloc[0].dci_pdu[0],(void *)&UL_alloc_pdu,sizeof(DCI0_5MHz_TDD_1_6_t));
     break;
 
-
-  default:
+  case 6:
   case 7:
     DCI_pdu->Num_ue_spec_dci = 1;
     DCI_pdu->dci_alloc[0].L          = 2;
@@ -611,8 +611,8 @@ void fill_dci(DCI_PDU *DCI_pdu,PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc)
     break;
     */
 
-    /*default:
-      break;*/
+    default:
+      break;
   }
 
   /*

openair1/SCHED/phy_procedures_lte_eNb.c

@@ -2017,7 +2017,7 @@ void prach_procedures(PHY_VARS_eNB *eNB) {
       eNB->UE_stats[(uint32_t)UE_id].UE_timing_offset = preamble_delay_list[preamble_max]&0x1FFF; //limit to 13 (=11+2) bits
 
       eNB->UE_stats[(uint32_t)UE_id].sector = 0;
-      LOG_D(PHY,"[eNB %d/%d][RAPROC] Frame %d, subframe %d Initiating RA procedure (UE_id %d) with preamble %d, energy %d.%d dB, delay %d\n",
+      LOG_I(PHY,"[eNB %d/%d][RAPROC] Frame %d, subframe %d Initiating RA procedure (UE_id %d) with preamble %d, energy %d.%d dB, delay %d\n",
             eNB->Mod_id,
             eNB->CC_id,
             frame,

openair2/LAYER2/MAC/eNB_scheduler_ulsch.c

@@ -853,7 +853,7 @@ void schedule_ulsch_rnti(module_id_t   module_idP,
 	    UE_list->eNB_UE_stats[CC_id][UE_id].normalized_rx_power=normalized_rx_power;
 	    UE_list->eNB_UE_stats[CC_id][UE_id].target_rx_power=target_rx_power;
 	    UE_list->eNB_UE_stats[CC_id][UE_id].ulsch_mcs1=UE_template->pre_assigned_mcs_ul;
-            mcs = UE_template->pre_assigned_mcs_ul;//cmin (UE_template->pre_assigned_mcs_ul, openair_daq_vars.target_ue_ul_mcs); // adjust, based on user-defined MCS
+            mcs = cmin (UE_template->pre_assigned_mcs_ul, 10); // adjust, based on user-defined MCS
             if (UE_template->pre_allocated_rb_table_index_ul >=0) {
               rb_table_index=UE_template->pre_allocated_rb_table_index_ul;
             } else {