Skip to content

O
OpenXG-RAN
Commit 39ea154b authored by Navid Nikaein's avatar Navid Nikaein
Browse files
Options

* correct log messages in eNB app 

* remove exit condition on OPT wireshark interface
* add help for lte-softmodem


git-svn-id: http://svn.eurecom.fr/openair4G/trunk@7496 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 1c9ff497
Show whitespace changes
Inline Side-by-side
Showing with 59 additions and 16 deletions
openair2/ENB_APP/enb_config.c
View file @ 39ea154b
......@@ -1199,14 +1199,14 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP)
enb_properties.properties[enb_properties_index]->pusch_alpha[j] = UplinkPowerControlCommon__alpha_al1;
} else
AssertError (0, parse_errors ++,
"Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for pusch_p0_Nominal choice: AL0,AL04,AL05,AL06,AL07,AL08,AL09,AL1!\n",
"Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for pucch_Alpha choice: AL0,AL04,AL05,AL06,AL07,AL08,AL09,AL1!\n",
lib_config_file_name_pP, i, pusch_alpha);
enb_properties.properties[enb_properties_index]->pucch_p0_Nominal[j] = pucch_p0_Nominal;
if ((pucch_p0_Nominal<-127) || (pucch_p0_Nominal>-96))
AssertError (0, parse_errors ++,
"Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for pusch_p0_Nominal choice: -126..24 !\n",
"Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for pucch_p0_Nominal choice: -127..-96 !\n",
lib_config_file_name_pP, i, pucch_p0_Nominal);
enb_properties.properties[enb_properties_index]->msg3_delta_Preamble[j] = msg3_delta_Preamble;
......
openair2/UTIL/OPT/probe.c
View file @ 39ea154b
......@@ -383,9 +383,9 @@ static void SendFrame(guint8 radioType, guint8 direction, guint8 rntiType,
(const struct sockaddr *)&g_serv_addr, sizeof(g_serv_addr));
if (bytesSent != g_frameOffset) {
LOG_E(OPT, "sendto() failed - expected %d bytes, got %d (errno=%d)\n",
LOG_W(OPT, "sendto() failed (not a thread-safe func)- expected %d bytes, got %d (errno=%d)\n",
g_frameOffset, bytesSent, errno);
exit(1);
//exit(1);
}
}
......
targets/RT/USER/lte-softmodem.c
View file @ 39ea154b
......@@ -411,7 +411,46 @@ void signal_handler(int sig)
}
}
#endif
#define KNRM "\x1B[0m"
#define KRED "\x1B[31m"
#define KGRN "\x1B[32m"
#define KBLU "\x1B[34m"
#define RESET "\033[0m"
void help (void) {
printf (KGRN "Usage:\n");
printf(" sudo -E lte-softmodem [options]\n");
printf(" sudo -E ./lte-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.openEPC.conf -S -V -m 26 -t 16 -x 1 --ulsch-max-errors 100 -W\n\n");
printf("Options:\n");
printf(" --ulsch-max-errors set the max ULSCH erros\n");
printf(" --calib-ue-rx set UE RX calibration\n");
printf(" --calib-ue-rx-med \n");
printf(" --calib-ue-rxbyp\n");
printf(" --debug-ue-prach \n");
printf(" --no-L2-connect bypass L2 and upper layers\n");
printf(" --ue_rxgain set UE RX gain\n");
printf(" --ue_txgain set UE tx gain\n");
printf(" -C Set the downlink frequecny for all Component carrier\n");
printf(" -d Enable soft scope and L1 and L2 stats (Xforms)\n");
printf(" -F Calibrate the EXMIMO borad, available files: exmimo2_2arxg.lime exmimo2_2brxg.lime \n");
printf(" -g Set the global log level, valide options: (9:trace, 8/7:debug, 6:info, 4:warn, 3:error)\n");
printf(" -G Set the global log level \n");
printf(" -h provides this help message!\n");
printf(" -K Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n");
printf(" -m Set the maximum downlink MCS\n");
printf(" -M IP address of RRH\n");
printf(" -O eNB configuration file (located in targets/PROJECTS/GENERIC-LTE-EPC/CONF\n");
printf(" -q Enable processing timing measurement of lte softmodem on per subframe basis \n");
printf(" -R Set the PRB, valid values: 6, 25, 50, 100 \n");
printf(" -S Skip the missed slots/subframes \n");
printf(" -t Set the maximum uplink MCS\n");
printf(" -U Set the lte softmodem as a UE\n");
printf(" -W Enable L2 wireshark messages on localhost \n");
printf(" -V Enable VCD (generated file will be located atopenair_dump_eNB.vcd, read it with target/RT/USER/eNB.gtkw\n");
printf(" -x Set the transmission mode, valid options: 1 \n"RESET);
}
void exit_fun(const char* s)
{
if (s != NULL) {
......@@ -1906,7 +1945,7 @@ static void get_options (int argc, char **argv)
{NULL, 0, NULL, 0}
};
while ((c = getopt_long (argc, argv, "C:dK:g:F:G:qO:m:SUVRM:r:P:Ws:t:x:",long_options,NULL)) != -1) {
while ((c = getopt_long (argc, argv, "C:dK:g:F:G:hqO:m:SUVRM:r:P:Ws:t:x:",long_options,NULL)) != -1) {
switch (c) {
case LONG_OPTION_ULSCH_MAX_CONSECUTIVE_ERRORS:
ULSCH_max_consecutive_errors = atoi(optarg);
......@@ -2148,8 +2187,13 @@ static void get_options (int argc, char **argv)
}
break;
case 'h':
help ();
exit (-1);
default:
help ();
exit (-1);
break;
}
}
......@@ -2319,26 +2363,25 @@ int main( int argc, char **argv )
frame_parms[CC_id]->nb_antennas_rx = 1;
}
// initialize mscgen log
MSC_INIT(MSC_E_UTRAN);
// initialize the log (see log.h for details)
logInit();
//randominit (0);
set_taus_seed (0);
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
downlink_frequency[CC_id][0] = 2680000000; // Use float to avoid issue with frequency over 2^31.
downlink_frequency[CC_id][1] = downlink_frequency[CC_id][0];
downlink_frequency[CC_id][2] = downlink_frequency[CC_id][0];
downlink_frequency[CC_id][3] = downlink_frequency[CC_id][0];
printf("Downlink for CC_id %d frequency set to %u\n", CC_id, downlink_frequency[CC_id][0]);
//printf("Downlink for CC_id %d frequency set to %u\n", CC_id, downlink_frequency[CC_id][0]);
}
get_options (argc, argv); //Command-line options
// initialize mscgen log
MSC_INIT(MSC_E_UTRAN);
// initialize the log (see log.h for details)
logInit();
set_glog(glog_level, glog_verbosity);
//randominit (0);
set_taus_seed (0);
if (UE_flag==1) {
printf("configuring for UE\n");
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment