Merge branch 'feature-34-test_framework' into develop

cmake_targets/autotests/tools/configure_cots_bandrich_ue.py

@@ -33,6 +33,7 @@
 import time
 import serial
 import os
+from socket import AF_INET
 from pyroute2 import IPRoute
 import sys
 import re
@@ -62,7 +63,7 @@ def find_open_port():
    while True:
      if os.path.exists(serial_port) == True:
        return serial_port
-     for port in range(2,100):
+     for port in range(0,100):
         serial_port_tmp = '/dev/ttyUSB'+str(port)
         if os.path.exists(serial_port_tmp) == True:
            print 'New Serial Port : ' + serial_port_tmp
@@ -97,11 +98,12 @@ signal.signal(signal.SIGINT, signal_handler)
 #ser.isOpen()
 
 class pppThread (threading.Thread):
-    def __init__(self, threadID, name, counter):
+    def __init__(self, threadID, name, counter,port):
         threading.Thread.__init__(self)
         self.threadID = threadID
         self.name = name
         self.counter = counter
+        self.port=port
     def run(self):
         print "Starting " + self.name
         #Here we keep running pppd thread in indefinite loop as this script terminates sometimes
@@ -111,6 +113,10 @@ class pppThread (threading.Thread):
            print "Starting wvdial now..."
            print 'exit_flag = ' + str(exit_flag)
            send_command('AT+CGATT=1','OK', 300)
+           
+           #Now we do search and replace on wvdial config file
+           cmd="sed -i \"s%Modem = .*%Modem = " + self.port + "%g\" " +  bandrich_ppd_config
+           os.system(cmd)
            os.system('wvdial -C ' + bandrich_ppd_config + '' )
            if exit_flag == 1:
               print "Exit flag set to true. Exiting pppThread now"
@@ -146,6 +152,7 @@ def send_command (cmd, response, timeout):
 
 def start_ue () :
    #print 'Enter your commands below.\r\nInsert "exit" to leave the application.'
+   global serial_port
    timeout=60 #timeout in seconds
    send_command('AT', 'OK' , timeout)
    send_command('AT+CFUN=1' , 'OK' , timeout)
@@ -153,23 +160,33 @@ def start_ue () :
    send_command('AT+CGATT=1','OK', 300)
    #os.system('wvdial -C ' + bandrich_ppd_config + ' &' )
    
-   thread_ppp = pppThread(1, "ppp_thread", 1)
+   thread_ppp = pppThread(1, "ppp_thread", 1,port=serial_port)
    thread_ppp.start()
 
-   iface='ppp0'
+   #iface='ppp0'
    
    while 1:
      time.sleep ( 2)
+     iface=''
      #Now we check if ppp0 interface is up and running
      try:
         if exit_flag == 1:
           break
+        cmd="ifconfig -a | sed 's/[ \t].*//;/^$/d' | grep ppp"
+        status, out = commands.getstatusoutput(cmd)
+        iface=out
         ip = IPRoute()
         idx = ip.link_lookup(ifname=iface)[0]
-        os.system ('route add ' + gw + ' ppp0')
+        print "iface = " + iface
+        print " Setting route now..."
+        #os.system("status=1; while [ \"$status\" -ne \"0\" ]; do route add -host " + gw + ' ' + iface + " ; status=$? ;sleep 1; echo \"status = $status\"  ; sleep 2; done ")
+        os.system ('route add -host ' + gw + ' ' + iface + ' 2> /dev/null')
+        #ip.route('add', dst=gw, oif=iface)
+        
         os.system('sleep 5')
-        os.system ('ping ' + gw)
-        break
+        #print "Starting ping now..."
+        os.system ('ping -c 1 ' + gw)
+        #break
      except Exception, e:
         error = ' Interface ' + iface + 'does not exist...'
         error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: '  + str(e.__class__) + " : " + str( e)
@@ -206,6 +223,7 @@ def reset_ue():
   os.system(cmd + " ; sleep 15" )
   cmd = "sudo sh -c \"echo 1 > " + usb_dir + "/authorized\""
   os.system(cmd + " ; sleep 30" )
+  find_open_port()
   stop_ue()
 
 i=1
@@ -213,14 +231,17 @@ gw='192.172.0.1'
 while i <  len(sys.argv):
     arg=sys.argv[i]
     if arg == '--start-ue' :
+        print "Turning on UE..."
         find_open_port()
         print 'Using Serial port : ' + serial_port  
         start_ue()
     elif arg == '--stop-ue' :
+        print "Turning off UE..."
         find_open_port()
         print 'Using Serial port : ' + serial_port  
         stop_ue()
     elif arg == '--reset-ue' :
+        print "Resetting UE..."
         find_open_port()
         reset_ue()
     elif arg == '-gw' :

cmake_targets/autotests/tools/configure_usrpb210.py

+#!/usr/bin/python 
+#******************************************************************************
+
+#    OpenAirInterface 
+#    Copyright(c) 1999 - 2014 Eurecom
+
+#    OpenAirInterface is free software: you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License as published by
+#    the Free Software Foundation, either version 3 of the License, or
+#    (at your option) any later version.
+
+
+#    OpenAirInterface is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with OpenAirInterface.The full GNU General Public License is 
+#   included in this distribution in the file called "COPYING". If not, 
+#   see <http://www.gnu.org/licenses/>.
+
+#  Contact Information
+#  OpenAirInterface Admin: openair_admin@eurecom.fr
+#  OpenAirInterface Tech : openair_tech@eurecom.fr
+#  OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
+  
+#  Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
+
+import time
+import serial
+import os
+from pyroute2 import IPRoute
+import sys
+import re
+import threading
+import signal
+import traceback
+import os
+import commands
+
+# configure the serial connections (the parameters differs on the device you are connecting to)
+#First we find an open port to work with
+serial_port=''
+openair_dir = os.environ.get('OPENAIR_DIR')
+if openair_dir == None:
+  print "Error getting OPENAIR_DIR environment variable"
+  sys.exit(1)
+
+sys.path.append(os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/tools/'))
+
+from lib_autotest import *
+
+#Stop the USB BUS of USRPB210
+def stop_usrpb210():
+  stringIdBandrich='National Instruments Corp.'
+  status, out = commands.getstatusoutput('lsusb | grep -i \'' + stringIdBandrich + '\'')
+  if (out == '') :
+     print "USRP B210 not found. Exiting now..."
+     sys.exit()
+  p=re.compile('Bus\s*(\w+)\s*Device\s*(\w+):\s*ID\s*(\w+):(\w+)')
+  res=p.findall(out)
+  BusId=res[0][0]
+  DeviceId=res[0][1]
+  VendorId=res[0][2]
+  ProductId=res[0][3]
+  usb_dir= find_usb_path(VendorId, ProductId)
+  print "USRP B210 found in..." + usb_dir
+  cmd = "sudo sh -c \"echo 0 > " + usb_dir + "/authorized\""
+  os.system(cmd)
+
+#Start the USB bus of USRP B210
+def start_usrpb210():
+  stringIdBandrich='National Instruments Corp.'  
+  status, out = commands.getstatusoutput('lsusb | grep -i \'' + stringIdBandrich + '\'')
+  if (out == '') :
+     print "USRP B210 not found. Exiting now..."
+     sys.exit()
+  p=re.compile('Bus\s*(\w+)\s*Device\s*(\w+):\s*ID\s*(\w+):(\w+)')
+  res=p.findall(out)
+  BusId=res[0][0]
+  DeviceId=res[0][1]
+  VendorId=res[0][2]
+  ProductId=res[0][3]
+  usb_dir= find_usb_path(VendorId, ProductId)
+  print "USRP B210 found in..." + usb_dir
+  cmd = "sudo sh -c \"echo 1 > " + usb_dir + "/authorized\""
+  os.system(cmd)
+
+i=1
+while i <  len(sys.argv):
+    arg=sys.argv[i]
+    if arg == '--start-usrpb210' :
+        start_usrpb210()
+    elif arg == '--stop-usrpb210' :
+        stop_usrpb210()
+    elif arg == '-h' :
+        print "--stop-usrpb210:  Stop the USRP B210. It cannot be found in uhd_find_devices" 
+        print "--start-usrpb210:  Start the USRP B210. It can now be found in uhd_find_devices"
+    else :
+        print " Script called with wrong arguments, arg = " + arg
+        sys.exit()
+    i = i +1
+
+

cmake_targets/tools/build_helper

@@ -226,7 +226,25 @@ check_install_additional_tools (){
 	valgrind  \
 	vlan	  \
 	ctags \
-        ntpdate
+        ntpdate \
+        iperf3 \
+        android-tools-adb
+
+    $SUDO pip install paramiko
+    $SUDO pip install pyroute2
+    $SUDO rm -fr /opt/ssh
+    $SUDO git clone https://gist.github.com/2190472.git /opt/ssh
+    
+    log_netiface=$OPENAIR_DIR/cmake_targets/log/netiface_install_log.txt
+    echo_info "Installing Netinterfaces package. The logfile for installation is in $log_netiface"
+    (
+    $SUDO rm -fr /tmp/netifaces-0.10.4.tar.gz /tmp/netifaces
+    wget -P /tmp  https://pypi.python.org/packages/18/fa/dd13d4910aea339c0bb87d2b3838d8fd923c11869b1f6e741dbd0ff3bc00/netifaces-0.10.4.tar.gz
+    tar -xzvf /tmp/netifaces-0.10.4.tar.gz -C /tmp
+    cd /tmp/netifaces-0.10.4
+    $SUDO python setup.py install
+    cd -
+    ) >& $log_netiface
 }
 
 check_install_oai_software() {
@@ -293,8 +311,7 @@ check_install_oai_software() {
         python-numpy \
         sshpass \
         libxslt1-dev \
-        android-tools-adb \
-        iperf3
+        android-tools-adb
 
     $SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
     
@@ -303,11 +320,7 @@ check_install_oai_software() {
     install_nettle_from_source
     install_gnutls_from_source
 
-    $SUDO pip install paramiko
-    $SUDO pip install pyroute2
     install_asn1c_from_source
-    $SUDO rm -fr /opt/ssh
-    $SUDO git clone https://gist.github.com/2190472.git /opt/ssh
 }
 
 install_asn1c_from_source(){
@@ -315,14 +328,12 @@ install_asn1c_from_source(){
     echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_log "
     (
     $SUDO rm -rf /tmp/asn1c-r1516
-    mkdir -p /tmp/asn1c-r1516
+    svn co https://github.com/vlm/asn1c/trunk  /tmp/asn1c-r1516 -r 1516
     cd /tmp/asn1c-r1516 
-    rm -rf /tmp/asn1c-r1516/*
-    svn co https://github.com/vlm/asn1c/trunk  /tmp/asn1c-r1516 -r 1516 > /tmp/log_compile_asn1c
-    patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0 >> /tmp/log_compile_asn1c
-    patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0 >> /tmp/log_compile_asn1c
-    patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0 >> /tmp/log_compile_asn1c
-    patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_3.p0 >> /tmp/log_compile_asn1c
+    patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0 
+    patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0 
+    patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0 
+    patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_3.p0 
     ./configure
     make -j`nproc`
     $SUDO make install