Merge branch 'develop' into feature-38-bladerf

cmake_targets/autotests/README.txt

@@ -171,6 +171,41 @@ Obj.#   Case#   Test#	Description
 01      65      04      Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
 01      65      05      Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
 
+
+01      70      00      lte-softmodem tests with SoDeRa RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
+01      70      00      Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
+01      70      01      Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
+01      70      02      Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
+01      70      03      Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
+01      70      04      Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
+01      70      05      Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
+
+
+01      75      00      lte-softmodem + RRH tests with B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
+01      75      00      Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
+01      75      01      Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
+01      75      02      Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
+01      75      03      Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
+01      75      04      Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
+01      75      05      Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
+
+01      80      00      lte-softmodem + RRH tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
+01      80      00      Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
+01      80      01      Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
+01      80      02      Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
+01      80      03      Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
+01      80      04      Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
+01      80      05      Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
+
+01      85      00      lte-softmodem + RRH tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
+01      85      00      Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
+01      85      01      Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
+01      85      02      Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
+01      85      03      Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
+01      85      04      Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
+01      85      05      Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
+
+
 01      64              lte-softmodem-noS1 tests
 
 02                      Functional test case

cmake_targets/autotests/run_exec_autotests.bash

@@ -12,7 +12,7 @@ trap handle_ctrl_c INT
 source $OPENAIR_DIR/cmake_targets/tools/test_helper
 
 
-#SUDO="sudo -E "
+SUDO="sudo -E -S"
 tdir=$OPENAIR_DIR/cmake_targets/autotests
 rm -fr $tdir/bin 
 mkdir -p $tdir/bin
@@ -404,14 +404,12 @@ until [ -z "$1" ]
    esac
   done
 
-if [ "$SET_PASSWORD" == "1" ]; then
-   mypassword=$passwd
-else
-   read -s -p "Enter Password: " mypassword
+if [ "$SET_PASSWORD" != "1" ]; then
+   read -s -p "Enter Password: " passwd
 fi
 
 tmpfile=`mktemp`
-echo \'$passwd\' | $SUDO echo $HOME >& $tmpfile
+echo $passwd | $SUDO echo $HOME > $tmpfile
 tstsudo=`cat $tmpfile`
 if [ "$tstsudo" != "$HOME" ]; then
   echo "$USER might not have sudo privileges. Exiting" 
@@ -509,7 +507,7 @@ for search_expr in "${test_case_array[@]}"
     if [ "$class" == "compilation" ]; then
         test_compile "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags"
     elif  [ "$class" == "execution" ]; then
-        $SUDO killall -q oaisim_nos1
+        echo \'passwd\' | $SUDO killall -q oaisim_nos1
         test_compile_and_run "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags" "$mypassword" "$test_config_file"
     else
         echo "Unexpected class of test case...Skipping the test case $name ...."

cmake_targets/autotests/tools/configure_cots_bandrich_ue.py

@@ -131,6 +131,7 @@ def start_ue () :
         ip = IPRoute()
         idx = ip.link_lookup(ifname=iface)[0]
         os.system ('route add ' + gw + ' ppp0')
+        os.system('sleep 5')
         os.system ('ping ' + gw)
         break
      except Exception, e:

cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py

+#!/usr/bin/python 
+
+import time
+import serial
+import os
+from pyroute2 import IPRoute
+import sys
+import re
+import threading
+import signal
+import traceback
+import os
+import commands
+
+# configure the serial connections (the parameters differs on the device you are connecting to)
+#First we find an open port to work with
+serial_port=''
+ser=serial.Serial()
+openair_dir = os.environ.get('OPENAIR_DIR')
+if openair_dir == None:
+  print "Error getting OPENAIR_DIR environment variable"
+  sys.exit(1)
+
+sys.path.append(os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/tools/'))
+
+from lib_autotest import *
+
+def find_open_port():
+   global serial_port, ser
+   max_ports=100
+   if os.path.exists(serial_port) == True:
+     return serial_port
+   for port in range(0,100):
+      serial_port = '/dev/ttyUSB'+str(port)
+      if os.path.exists(serial_port) == True:
+         print 'New Serial Port : ' + serial_port
+         break
+
+   ser = serial.Serial(port=serial_port)
+   return
+
+
+    
+#serial_port = '/dev/ttyUSB2'
+bandrich_ppd_config = os.environ.get('OPENAIR_DIR') + '/cmake_targets/autotests/tools/wdial.bandrich.conf'
+
+exit_flag=0
+
+def signal_handler(signal, frame):
+        print('You pressed Ctrl+C!')
+        print('Resetting the UE to detached state')
+        timeout=10
+        exit_flag=1
+        send_command('AT+CGATT=0' , 'OK' , timeout)
+        sys.exit(0)
+
+signal.signal(signal.SIGINT, signal_handler)
+
+
+
+#ser.open()
+#ser.isOpen()
+
+class pppThread (threading.Thread):
+    def __init__(self, threadID, name, counter):
+        threading.Thread.__init__(self)
+        self.threadID = threadID
+        self.name = name
+        self.counter = counter
+    def run(self):
+        print "Starting " + self.name
+        #Here we keep running pppd thread in indefinite loop as this script terminates sometimes
+        #while 1:
+        while 1:
+           time.sleep(5) #Hard coded, do not reduce this number! 
+           print "Starting wvdial now..."
+           print 'exit_flag = ' + str(exit_flag)
+           send_command('AT+CGATT=1','OK', 300)
+           os.system('wvdial -C ' + bandrich_ppd_config + '' )
+           if exit_flag == 1:
+              print "Exit flag set to true. Exiting pppThread now"
+           print "Terminating wvdial now..."
+
+def send_command (cmd, response, timeout):
+   count=0
+   sleep_duration = 1
+   print 'In function: send_command: cmd = <' + cmd + '> response: <' + response + '> \n'
+   global serial_port, ser
+   while count <= timeout:
+      try:
+        #Sometimes the port does not exist coz of reset in modem.
+        #In that case, we need to search for this port again
+        if os.path.exists(serial_port) == False:
+            find_open_port()
+        ser.write (cmd + '\r\n')
+        out = ''
+        time.sleep(sleep_duration)
+        count = count + sleep_duration
+        while ser.inWaiting() > 0:
+            out += ser.read(1)
+        print 'out = <' + out + '> response = <' + response + '> \n'
+        if re.search(response, out):
+          break
+      except Exception, e:
+        error = ' cmd : ' + cmd + ' response : ' + response
+        error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: '  + str(e.__class__) + " : " + str( e)
+        error = error + traceback.format_exc()
+        print error
+        
+
+def start_ue () :
+   #print 'Enter your commands below.\r\nInsert "exit" to leave the application.'
+   timeout=60 #timeout in seconds
+   send_command('AT', 'OK' , timeout)
+   #send_command('AT+CFUN=1' , 'OK' , timeout)
+   #send_command('AT+CGATT=0' , 'OK' , timeout)
+   send_command('AT+CGATT=1','OK', 300)
+   #os.system('wvdial -C ' + bandrich_ppd_config + ' &' )
+   
+   thread_ppp = pppThread(1, "ppp_thread", 1)
+   thread_ppp.start()
+
+   iface='ppp0'
+   
+   while 1:
+     time.sleep ( 2)
+     #Now we check if ppp0 interface is up and running
+     try:
+        if exit_flag == 1:
+          break
+        ip = IPRoute()
+        idx = ip.link_lookup(ifname=iface)[0]
+        os.system ('route add ' + gw + ' ppp0')
+        os.system('sleep 5')
+        os.system ('ping ' + gw)
+        break
+     except Exception, e:
+        error = ' Interface ' + iface + 'does not exist...'
+        error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: '  + str(e.__class__) + " : " + str( e)
+        error = error + traceback.format_exc()
+        print error
+    
+   thread_ppp.join()
+
+def stop_ue():
+   timeout=60
+   os.system('killall wvdial')
+   send_command('AT', 'OK' , timeout)
+   send_command('AT+CGATT=0' , 'OK|ERROR' , timeout)
+   #send_command('AT+CFUN=4' , 'OK' , timeout)
+
+
+#reset the USB BUS of Bandrich UE
+def reset_ue():
+  stringIdBandrich='Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard'
+  status, out = commands.getstatusoutput('lsusb | grep -i \'' + stringIdBandrich + '\'')
+  if (out == '') :
+     print "Bandrich 4G LTE Adapter not found. Exiting now..."
+     sys.exit()
+  p=re.compile('Bus\s*(\w+)\s*Device\s*(\w+):\s*ID\s*(\w+):(\w+)')
+  res=p.findall(out)
+  BusId=res[0][0]
+  DeviceId=res[0][1]
+  VendorId=res[0][2]
+  ProductId=res[0][3]
+  usb_dir= find_usb_path(VendorId, ProductId)
+  print "Bandrich 4G LTE Adapter found in..." + usb_dir
+  cmd = "sudo sh -c \"echo 0 > " + usb_dir + "/authorized\""
+  os.system(cmd + " ; sleep 15" )
+  cmd = "sudo sh -c \"echo 1 > " + usb_dir + "/authorized\""
+  os.system(cmd + " ; sleep 30" )
+
+i=1
+gw='192.172.0.1'
+while i <  len(sys.argv):
+    arg=sys.argv[i]
+    if arg == '--start-ue' :
+        find_open_port()
+        print 'Using Serial port : ' + serial_port  
+        start_ue()
+    elif arg == '--stop-ue' :
+        find_open_port()
+        print 'Using Serial port : ' + serial_port  
+        stop_ue()
+    elif arg == '--reset-ue' :
+        reset_ue()
+    elif arg == '-gw' :
+        gw = sys.argv[i+1]
+        i=i+1
+    elif arg == '-h' :
+        print "--reset-ue:  Reset the UE on USB Bus. Similar to unplugging and plugging the UE"
+        print "--stop-ue:  Stop the UE. Send DETACH command" 
+        print "--start-ue:  Start the UE. Send ATTACH command"
+        print "-gw:  Specify the default gw as sometimes the gateway/route arguments are not set properly via wvdial"
+    else :
+        print " Script called with wrong arguments, arg = " + arg
+        sys.exit()
+    i = i +1
+
+

cmake_targets/autotests/tools/search_repl.py

@@ -26,6 +26,9 @@ if keyword == 'mme_ip_address':
 elif keyword == 'IPV4_LIST':
    replacement_text = keyword + ' =  ( ' + replacement_text + '  ) ; '
    string = re.sub(r"IPV4_LIST\s*=\s*\(([^\$]+?)\)\s*;", replacement_text, string, re.M)
+elif keyword == 'rrh_gw_config':
+   replacement_text = keyword + ' =  ( { ' + replacement_text + ' } ) ; '
+   string = re.sub(r"rrh_gw_config\s*=\s*\(([^\$]+?)\)\s*;", replacement_text, string, re.M)
 else :
    replacement_text = keyword + ' =  ' + replacement_text + ' ; '
    string = re.sub(r"%s\s*=\s*([^\$]+?)\s*;" % keyword , replacement_text, string, re.M)   

cmake_targets/build_oai

@@ -42,13 +42,13 @@ THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
 source $THIS_SCRIPT_PATH/tools/build_helper
 
 MSC_GEN="False"
-XFORMS="False"
+XFORMS="True"
 PRINT_STATS="False"
 VCD_TIMING="False"
 LOWLATENCY_FLAG_USER="False"
 FORCE_LOWLATENCY_FLAG_USER=""
 REL="Rel10"
-HW="EXMIMO"
+HW="None"
 TP="None"
 NOS1=0
 EPC=0
@@ -91,7 +91,7 @@ Options
    default is Rel10,
    Rel8 limits the implementation to 3GPP Release 8 version
 -w | --hardware
-   EXMIMO (Default), USRP, BLADERF, None
+   EXMIMO, USRP, BLADERF, ETHERNET, LMSSDR, None (Default)
    Adds this RF board support (in external packages installation and in compilation)
 -t | --transport protocol
    ETHERNET , None
@@ -181,7 +181,7 @@ function main() {
        -w | --hardware)
             HW="$2" #"${i#*=}"
             # Use OAI_USRP  as the key word USRP is used inside UHD driver           
-	    if [ "$HW" != "BLADERF" -a  "$HW" != "USRP" -a  "$HW" != "None" -a  "$HW" != "EXMIMO"  ] ; then 
+	    if [ "$HW" != "BLADERF" -a  "$HW" != "USRP" -a "$HW" != "LMSSDR" -a  "$HW" != "None" -a  "$HW" != "EXMIMO"  ] ; then 
 		echo_fatal "Unknown HW type $HW will exit..."		
 	    else
 		if [ "$HW" == "USRP" ] ; then 
@@ -190,6 +190,9 @@ function main() {
 		if [ "$HW" == "BLADERF" ] ; then 
 		    HW="OAI_BLADERF"
 		fi
+		if [ "$HW" == "LMSSDR" ] ; then 
+		    HW="OAI_LMSSDR"
+		fi 
 		echo_info "Setting hardware to: $HW"
 	    fi
             shift 2;;
@@ -299,6 +302,7 @@ function main() {
       fi
   fi
 
+  echo_info "RF HW set to $HW" 
   #Now we set flags to enable deadline scheduler settings
   #By default: USRP: disable, 
   #By default: BLADERF: enable,
@@ -312,6 +316,8 @@ function main() {
         LOWLATENCY_FLAG_USER="False"
      elif [ "$HW" = "OAI_BLADERF" ] ; then 
         LOWLATENCY_FLAG_USER="False"
+     elif [ "$HW" = "OAI_LMSSDR" ] ; then 
+        LOWLATENCY_FLAG_USER="False"
      elif [ "$HW" = "None" ] ; then 
         LOWLATENCY_FLAG_USER="False"
      else 
@@ -689,6 +695,16 @@ function main() {
 	      ln -s liboai_bladerfdevif.so liboai_device.so
 	      ln -s $dbin/liboai_bladerfdevif.so.$REL $dbin/liboai_device.so
 	      echo_info "liboai_device.so is linked to BLADERF device library"	 
+	  elif [ "$HW" == "OAI_LMSSDR" ] ; then
+#	      if [ -f "/usr/include/libbladeRF.h" ] ; then
+		  compilations \
+		      $build_dir oai_lmssdrdevif \
+		      liboai_lmssdrdevif.so $dbin/liboai_lmssdrdevif.so.$REL
+#	      fi
+
+	      ln -s liboai_lmssdrdevif.so liboai_device.so
+	      ln -s $dbin/liboai_lmssdrdevif.so.$REL $dbin/liboai_device.so
+	      echo_info "liboai_device.so is linked to LMSSDR device library"	 
 	  else 
 	      echo_info "liboai_device.so is not linked to any device library"	    
 	  fi
@@ -744,9 +760,9 @@ fi
     rm -fr $OPENAIR_DIR/cmake_targets/autotests/log
     mkdir -p $OPENAIR_DIR/cmake_targets/autotests/log
     if [ "$RUN_GROUP" -eq "1" ]; then
-        $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -g "$TEST_CASE_GROUP" -p '$mypassword' >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
+        $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -g "$TEST_CASE_GROUP" -p $mypassword >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
     else
-        $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -p '$mypassword' >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
+        $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -p $mypassword >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
     fi
     wait
   else

cmake_targets/epc_test/CMakeLists.template

 cmake_minimum_required(VERSION 2.8)
 
 set (  CMAKE_BUILD_TYPE "RelWithDebInfo" )
+set (  ASN_DEBUG False)
 set (  ADDR_CONF False )
 set (  DEBUG_OMG False )
 set (  DISABLE_XER_PRINT False )
 set (  DRIVER2013 True )
 set (  EMOS False )
+set (  EMIT_ASN_DEBUG False )
 set (  ENABLE_FXP True )
 set (  ENABLE_ITTI True )
 set (  ENABLE_NAS_UE_LOGGING True )
@@ -47,9 +49,9 @@ set (  OAI_EMU False )
 set (  OAISIM False )
 set (  OAI_NW_DRIVER_TYPE_ETHERNET False )
 set (  OAI_NW_DRIVER_USE_NETLINK True )
-set (  OPENAIR1 False )
-set (  OPENAIR2 False )
-set (  OPENAIR_LTE F )
+set (  OPENAIR1 True )
+set (  OPENAIR2 True )
+set (  OPENAIR_LTE True )
 set (  PACKAGE_NAME "epc_test" )
 set (  PBS_SIM False )
 set (  PDCP_USE_NETLINK True )
@@ -74,4 +76,4 @@ set (  SMBV False )
 set (  TEST_OMG False )
 set (  USE_MME "R10" )
 set (  USER_MODE True )
-set (  XER_PRINT False )
+set (  XER_PRINT True )

cmake_targets/lte-simulators/CMakeLists.txt

@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 2.8)
 set(PACKAGE_NAME "unitary_tests_simulators")
 set(PHYSIM True)
 set(RF_BOARD None)
-set(XFORMS False)
+set(XFORMS True)
 
 set(DEBUG_PHY False)
 set(MU_RECIEVER False)

cmake_targets/rrh_gw/CMakeLists.txt

-cmake_minimum_required(VERSION 2.8)
-set(ENABLE_VCD_FIFO False )
-set(ENABLE_ITTI False )
-set(RF_BOARD "ETHERNET")
-set(PACKAGE_NAME "\"rrh_gw\"")
-include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)

cmake_targets/tools/build_helper

@@ -30,7 +30,7 @@
 ################################################################################
 # file build_helper
 # brief
-# author Laurent Thomas
+# authors Laurent Thomas, Lionel GAUTHIER
 #
 #######################################
 SUDO='sudo -E'
@@ -269,7 +269,9 @@ check_install_oai_software() {
 	pydb \
 	wvdial \
         python-numpy \
-        sshpass
+        sshpass \
+        libxslt1-dev
+
     $SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
     if [ `lsb_release -rs` = '12.04' ] ; then
         install_nettle_from_source
@@ -288,13 +290,15 @@ install_asn1c_from_source(){
     asn1_install_dir=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
     echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_dir "
     (
-    rm -rf /tmp/asn1c-r1516
+    $SUDO rm -rf /tmp/asn1c-r1516
     mkdir -p /tmp/asn1c-r1516
     cd /tmp/asn1c-r1516
-    svn co https://github.com/vlm/asn1c/trunk  /tmp/asn1c-r1516 -r 1516 
-    patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0 
-    patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0 
-    patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0 
+    rm -rf /tmp/asn1c-r1516/*
+    svn co https://github.com/vlm/asn1c/trunk  /tmp/asn1c-r1516 -r 1516 > /tmp/log_compile_asn1c
+    patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0 >> /tmp/log_compile_asn1c
+    patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0 >> /tmp/log_compile_asn1c
+    patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0 >> /tmp/log_compile_asn1c
+    patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_3.p0 >> /tmp/log_compile_asn1c
     ./configure
     make -j`nproc`
     $SUDO make install
@@ -324,7 +328,6 @@ install_nas_tools() {
 }
 
 
-
 ################################
 # set_openair_env
 ###############################
@@ -380,3 +383,21 @@ done
 }
 
 
+# get from http://www.linuxjournal.com/content/validating-ip-address-bash-script
+validate_ip() {
+
+local  ip=$1
+local  stat=1
+
+if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
+    OIFS=$IFS
+    IFS='.'
+    ip=($ip)
+    IFS=$OIFS
+    [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
+        && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]
+    stat=$?
+fi
+
+return $stat
+}

cmake_targets/tools/build_test_epc_tools

@@ -22,7 +22,7 @@
 #  Contact Information
 #  OpenAirInterface Admin: openair_admin@eurecom.fr
 #  OpenAirInterface Tech : openair_tech@eurecom.fr
-#  OpenAirInterface Dev  : openair4g-devel@eurecom.fr
+#  OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
 #
 #  Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
 #
@@ -121,6 +121,7 @@ function main()
       echo "Cleaning TEST_EPC"
     fi
     rm -f $OPENAIR_DIR/targets/bin/test_epc_generate_scenario
+    rm -f $OPENAIR_DIR/targets/bin/test_epc_play_scenario
     rm -Rf build 2>&1
     mkdir -m 777 -p -v build
   fi
@@ -140,6 +141,13 @@ function main()
   compilations \
       epc_test test_epc_generate_scenario \
       test_epc_generate_scenario $dbin/test_epc_generate_scenario
+
+  compilations \
+      epc_test test_epc_play_scenario \
+      test_epc_play_scenario $dbin/test_epc_play_scenario
+      
+  $SUDO cp -upv test_epc_generate_scenario /usr/local/bin
+  $SUDO cp -upv test_epc_play_scenario     /usr/local/bin
 }
 
 

cmake_targets/tools/run_enb_s1_usrp

@@ -29,9 +29,9 @@
 ################################################################################
 # file run_enb_s1_usrp
 # brief run script for eNB USRP.
-# author  Lionel GAUTHIER
+# author  Lionel GAUTHIER and Navid Nikaein
 # company Eurecom
-# email:  lionel.gauthier@eurecom.fr 
+# email:  lionel.gauthier@eurecom.fr and navid.nikaein@eurecom.fr
 
 
 ################################
@@ -56,6 +56,8 @@ function help()
   echo_error "Mandatory arguments to long options are mandatory for short options too."
   echo_error "  -g, --gdb                           Run with GDB."
   echo_error "  -h, --help                          Print this help."
+  echo_error "  -e, --ulsch-max-errors    num-errs  maximum allowed number of uplink errors"
+  echo_error "  -f, --rf-config-file      filename  RF specific configuration file"
   echo_error "  -K, --itti-dump-file      filename  ITTI dump file containing all ITTI events occuring during EPC runtime.(can omit file name if last argument)"
   echo_error "  -M, --target-dl-mcs       mcs       Downlink target MCS."
   echo_error "  -m, --mscgen              directory Generate mscgen output files in a directory"
@@ -137,6 +139,26 @@ function main()
         shift;
         exit 0
         ;;
+     -e | --ulsch-max-errors)
+        ulsch_max_errors=$2
+        echo "setting  --ulsch-max-errors to $ulsch_max_errors"
+        exe_arguments="$exe_arguments --ulsch-max-errors=$ulsch_max_errors"
+        shift 2;
+	 ;;      
+     -f | --rf-config-file)
+        rf_config_file=$2
+        # can omit file name if last arg on the line
+        if [ "x$rf_config_file" = "x" ]; then
+          rf_config_file=null
+          shift 1;
+        else
+          shift 2;
+        fi
+	if [ "$rf_config_file" != "null" ]; then
+            echo "setting  --rf-config-file to $rf_config_file"
+            exe_arguments="$exe_arguments --rf-config-file=$rf_config_file"
+	fi 
+        ;;      
      -K | --itti-dump-file)
         itti_dump_file=$2
         # can omit file name if last arg on the line

cmake_targets/tools/stop_exmimo2

@@ -13,5 +13,5 @@ sudo -E $OPENAIR_DIR/cmake_targets/tools/init_exmimo2
 
 #now we stop the card from transmitting anything
 cd $OPENAIR_DIR/targets/bin
-sudo -E octave $OPENAIR_DIR/cmake_targets/tools/exmimo_stop_octave.m
+sudo -E octave -H --no-gui $OPENAIR_DIR/cmake_targets/tools/exmimo_stop_octave.m
 

openair1/PHY/LTE_ESTIMATION/adjust_gain.c

@@ -38,23 +38,16 @@ extern int card;
 #endif
 
 void
-phy_adjust_gain (PHY_VARS_UE *phy_vars_ue, uint8_t eNB_id)
+phy_adjust_gain (PHY_VARS_UE *phy_vars_ue, uint32_t rx_power_fil_dB, uint8_t eNB_id)
 {
 
-  uint16_t rx_power_fil_dB;
 #ifdef EXMIMO
   exmimo_config_t *p_exmimo_config = openair0_exmimo_pci[card].exmimo_config_ptr;
   uint16_t i;
 #endif
-  int rssi;
-
-  rssi = dB_fixed(phy_vars_ue->PHY_measurements.rssi);
-
-  if (rssi>0) rx_power_fil_dB = rssi;
-  else rx_power_fil_dB = phy_vars_ue->PHY_measurements.rx_power_avg_dB[eNB_id];
 
   LOG_D(PHY,"Gain control: rssi %d (%d,%d)\n",
-         rssi,
+         rx_power_fil_dB,
          phy_vars_ue->PHY_measurements.rssi,
          phy_vars_ue->PHY_measurements.rx_power_avg_dB[eNB_id]
         );

openair1/PHY/LTE_ESTIMATION/defs.h

@@ -213,6 +213,7 @@ int8_t set_RSRQ_filtered(module_id_t Mod_id,uint8_t CC_id,uint8_t eNB_index,floa
 
 //! Automatic gain control
 void phy_adjust_gain (PHY_VARS_UE *phy_vars_ue,
+		      uint32_t rx_power_fil_dB,
                       unsigned char eNB_id);
 
 int lte_ul_channel_estimation(PHY_VARS_eNB *phy_vars_eNB,

openair1/PHY/LTE_ESTIMATION/lte_sync_time.c

@@ -483,13 +483,10 @@ int lte_sync_time(int **rxdata, ///rx data in time domain
 
   *eNB_id = sync_source;
 
-#ifdef DEBUG_PHY
-  msg("[PHY][UE] lte_sync_time: Sync source = %d, Peak found at pos %d, val = %d\n",
-      sync_source,peak_pos,peak_val);
-
-
+  LOG_D(PHY,"[UE] lte_sync_time: Sync source = %d, Peak found at pos %d, val = %d (%d dB)\n",sync_source,peak_pos,peak_val,dB_fixed(peak_val)/2);
 
 
+#ifdef DEBUG_PHY
   if (debug_cnt == 0) {
     write_output("sync_corr0_ue.m","synccorr0",sync_corr_ue0,2*length,1,2);
     write_output("sync_corr1_ue.m","synccorr1",sync_corr_ue1,2*length,1,2);

openair1/PHY/LTE_REFSIG/primary_synch.h

-/*******************************************************************************
-    OpenAirInterface
-    Copyright(c) 1999 - 2014 Eurecom
-
-    OpenAirInterface is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-
-    OpenAirInterface is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with OpenAirInterface.The full GNU General Public License is
-   included in this distribution in the file called "COPYING". If not,
-   see <http://www.gnu.org/licenses/>.
-
-  Contact Information
-  OpenAirInterface Admin: openair_admin@eurecom.fr
-  OpenAirInterface Tech : openair_tech@eurecom.fr
-  OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
-
-  Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
-
- *******************************************************************************/
 short primary_synch0[144] = {0,0,0,0,0,0,0,0,0,0,32767,0,-26120,-19785,11971,-30502,-24020,-22288,32117,6492,31311,9658,-16384,-28378,25100,-21063,-7292,-31946,20429,25618,14948,29158,11971,-30502,31311,9658,25100,-21063,-16384,28377,-24020,22287,32117,6492,-7292,31945,20429,25618,-26120,-19785,-16384,-28378,-16384,28377,-26120,-19785,-32402,4883,31311,-9659,32117,6492,-7292,-31946,32767,-1,25100,-21063,-24020,22287,-32402,4883,-32402,4883,-24020,22287,25100,-21063,32767,-1,-7292,-31946,32117,6492,31311,-9659,-32402,4883,-26120,-19785,-16384,28377,-16384,-28378,-26120,-19785,20429,25618,-7292,31945,32117,6492,-24020,22287,-16384,28377,25100,-21063,31311,9658,11971,-30502,14948,29158,20429,25618,-7292,-31946,25100,-21063,-16384,-28378,31311,9658,32117,6492,-24020,-22288,11971,-30502,-26120,-19785,32767,0,0,0,0,0,0,0,0,0,0,0};
 short primary_synch1[144] = {0,0,0,0,0,0,0,0,0,0,32767,0,-31754,-8086,-24020,-22288,2448,32675,-26120,19784,27073,18458,-16384,28377,25100,21062,-29523,14217,-7292,31945,-13477,-29868,-24020,-22288,27073,18458,25100,21062,-16384,-28378,2448,-32676,-26120,19784,-29523,-14218,-7292,31945,-31754,-8086,-16384,28377,-16384,-28378,-31754,-8086,31311,-9659,27073,-18459,-26120,19784,-29523,14217,32767,-1,25100,21062,2448,-32676,31311,-9659,31311,-9659,2448,-32676,25100,21062,32767,0,-29523,14217,-26120,19784,27073,-18459,31311,-9659,-31754,-8086,-16384,-28378,-16384,28377,-31754,-8086,-7292,31945,-29523,-14218,-26120,19784,2448,-32676,-16384,-28378,25100,21062,27073,18458,-24020,-22288,-13477,-29868,-7292,31945,-29523,14217,25100,21062,-16384,28377,27073,18458,-26120,19784,2448,32675,-24020,-22288,-31754,-8086,32767,0,0,0,0,0,0,0,0,0,0,0};
 short primary_synch2[144] = {0,0,0,0,0,0,0,0,0,0,32767,0,-31754,8085,-24020,22287,2448,-32676,-26120,-19785,27073,-18459,-16384,-28378,25100,-21063,-29523,-14218,-7292,-31946,-13477,29867,-24020,22287,27073,-18459,25100,-21063,-16384,28377,2448,32675,-26120,-19785,-29523,14217,-7292,-31946,-31754,8085,-16384,-28378,-16384,28377,-31754,8085,31311,9658,27073,18458,-26120,-19785,-29523,-14218,32767,0,25100,-21063,2448,32675,31311,9658,31311,9658,2448,32675,25100,-21063,32767,0,-29523,-14218,-26120,-19785,27073,18458,31311,9658,-31754,8085,-16384,28377,-16384,-28378,-31754,8085,-7292,-31946,-29523,14217,-26120,-19785,2448,32675,-16384,28377,25100,-21063,27073,-18459,-24020,22287,-13477,29867,-7292,-31946,-29523,-14218,25100,-21063,-16384,-28378,27073,-18459,-26120,-19785,2448,-32676,-24020,22287,-31754,8085,32767,-1,0,0,0,0,0,0,0,0,0,0};

openair1/PHY/LTE_TRANSPORT/initial_sync.c

@@ -48,7 +48,7 @@
 #include "gain_control.h"
 #endif
 
-#if defined(OAI_USRP) || defined(EXMIMO)
+#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_LMSSDR)
 #include "common_lib.h"
 extern openair0_config_t openair0_cfg[];
 #endif
@@ -280,7 +280,6 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
   uint8_t flip_fdd_ncp,flip_fdd_ecp,flip_tdd_ncp,flip_tdd_ecp;
   //  uint16_t Nid_cell_fdd_ncp=0,Nid_cell_fdd_ecp=0,Nid_cell_tdd_ncp=0,Nid_cell_tdd_ecp=0;
   LTE_DL_FRAME_PARMS *frame_parms = &phy_vars_ue->lte_frame_parms;
-  int i;
   int ret=-1;
   int aarx,rx_power=0;
   /*#ifdef OAI_USRP
@@ -291,17 +290,10 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
   frame_parms->Ncp=NORMAL;
   frame_parms->frame_type=FDD;
   init_frame_parms(frame_parms,1);
-
-  //  write_output("rxdata0.m","rxd0",phy_vars_ue->lte_ue_common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1);
-
-  /*#ifdef OAI_USRP
-  for (aarx = 0; aarx<frame_parms->nb_antennas_rx;aarx++) {
-    rxdata128 = (__m128i*)phy_vars_ue->lte_ue_common_vars.rxdata[aarx];
-    for (i=0; i<(frame_parms->samples_per_tti*10)>>2; i++) {
-      rxdata128[i] = _mm_srai_epi16(rxdata128[i],4);
-    } 
-  }
-  #endif*/
+  /*
+  write_output("rxdata0.m","rxd0",phy_vars_ue->lte_ue_common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1);
+  exit(-1);
+  */
   sync_pos = lte_sync_time(phy_vars_ue->lte_ue_common_vars.rxdata,
                            frame_parms,
                            (int *)&phy_vars_ue->lte_ue_common_vars.eNb_id);
@@ -316,32 +308,6 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
   LOG_I(PHY,"[UE%d] Initial sync : Estimated PSS position %d, Nid2 %d\n",phy_vars_ue->Mod_id,sync_pos,phy_vars_ue->lte_ue_common_vars.eNb_id);
 #endif
 
-
-  for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
-    rx_power += signal_energy(&phy_vars_ue->lte_ue_common_vars.rxdata[aarx][sync_pos2],
-                              frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples);
-
-  phy_vars_ue->PHY_measurements.rx_power_avg_dB[0] = dB_fixed(rx_power/frame_parms->nb_antennas_rx);
-
-#ifdef DEBUG_INITIAL_SYNCH
-  LOG_I(PHY,"[UE%d] Initial sync : Estimated power: %d dB\n",phy_vars_ue->Mod_id,phy_vars_ue->PHY_measurements.rx_power_avg_dB[0] );
-#endif
-
-#ifdef EXMIMO
-
-  if ((openair_daq_vars.rx_gain_mode == DAQ_AGC_ON) &&
-      (mode != rx_calib_ue) && (mode != rx_calib_ue_med) && (mode != rx_calib_ue_byp) )
-    //phy_adjust_gain(phy_vars_ue,0);
-    gain_control_all(phy_vars_ue->PHY_measurements.rx_power_avg_dB[0],0);
-
-#else
-#ifndef OAI_USRP
-  #ifndef OAI_BLADERF 
-  phy_adjust_gain(phy_vars_ue,0);
-  #endif
-#endif
-#endif
-
   // SSS detection
 
   // PSS is hypothesized in last symbol of first slot in Frame
@@ -530,20 +496,20 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
 #endif
 
     if (phy_vars_ue->UE_scan_carrier == 0) {
-#ifdef OPENAIR2
+      if (phy_vars_ue->mac_enabled==1) {
 	LOG_I(PHY,"[UE%d] Sending synch status to higher layers\n",phy_vars_ue->Mod_id);
 	//mac_resynch();
 	mac_xface->dl_phy_sync_success(phy_vars_ue->Mod_id,phy_vars_ue->frame_rx,0,1);//phy_vars_ue->lte_ue_common_vars.eNb_id);
-#endif //OPENAIR2
+	phy_vars_ue->UE_mode[0] = PRACH;
+      }
+      else {
+	phy_vars_ue->UE_mode[0] = PUSCH;
+      }
 
       generate_pcfich_reg_mapping(frame_parms);
       generate_phich_reg_mapping(frame_parms);
       //    init_prach625(frame_parms);
-#ifndef OPENAIR2
-      phy_vars_ue->UE_mode[0] = PUSCH;
-#else
-      phy_vars_ue->UE_mode[0] = PRACH;
-#endif
+
       //phy_vars_ue->lte_ue_pbch_vars[0]->pdu_errors=0;
       phy_vars_ue->lte_ue_pbch_vars[0]->pdu_errors_conseq=0;
     //phy_vars_ue->lte_ue_pbch_vars[0]->pdu_errors_last=0;
@@ -569,7 +535,7 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
 	  phy_vars_ue->lte_frame_parms.phich_config_common.phich_duration,
 	  phich_string[phy_vars_ue->lte_frame_parms.phich_config_common.phich_resource],
 	  phy_vars_ue->lte_frame_parms.nb_antennas_tx_eNB);
-#if defined(OAI_USRP) || defined(EXMIMO)
+#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_LMSSDR)
     LOG_I(PHY,"[UE %d] Frame %d Measured Carrier Frequency %.0f Hz (offset %d Hz)\n",
 	  phy_vars_ue->Mod_id,
 	  phy_vars_ue->frame_rx,
@@ -597,6 +563,65 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
 
   }
 
+  // gain control
+  if (ret!=0) { //we are not synched, so we cannot use rssi measurement (which is based on channel estimates)
+    rx_power = 0;
+
+    // do a measurement on the best guess of the PSS
+    for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
+      rx_power += signal_energy(&phy_vars_ue->lte_ue_common_vars.rxdata[aarx][sync_pos2],
+				frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples);
+    
+    /*
+    // do a measurement on the full frame
+    for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
+      rx_power += signal_energy(&phy_vars_ue->lte_ue_common_vars.rxdata[aarx][0],
+				frame_parms->samples_per_tti*10);
+    */
+
+    // we might add a low-pass filter here later
+    phy_vars_ue->PHY_measurements.rx_power_avg[0] = rx_power/frame_parms->nb_antennas_rx; 
+
+    phy_vars_ue->PHY_measurements.rx_power_avg_dB[0] = dB_fixed(phy_vars_ue->PHY_measurements.rx_power_avg[0]);
+
+#ifdef DEBUG_INITIAL_SYNCH
+  LOG_I(PHY,"[UE%d] Initial sync : Estimated power: %d dB\n",phy_vars_ue->Mod_id,phy_vars_ue->PHY_measurements.rx_power_avg_dB[0] );
+#endif
+
+#ifdef EXMIMO
+  if ((openair_daq_vars.rx_gain_mode == DAQ_AGC_ON) &&
+      (mode != rx_calib_ue) && (mode != rx_calib_ue_med) && (mode != rx_calib_ue_byp) )
+    //phy_adjust_gain(phy_vars_ue,0);
+    gain_control_all(phy_vars_ue->PHY_measurements.rx_power_avg_dB[0],0);
+
+#else
+#ifndef OAI_USRP
+#ifndef OAI_BLADERF 
+#ifndef OAI_LMSSDR
+  phy_adjust_gain(phy_vars_ue,phy_vars_ue->PHY_measurements.rx_power_avg_dB[0],0);
+#endif
+#endif
+#endif
+#endif
+  }
+  else {
+#ifdef EXMIMO
+  if ((openair_daq_vars.rx_gain_mode == DAQ_AGC_ON) &&
+      (mode != rx_calib_ue) && (mode != rx_calib_ue_med) && (mode != rx_calib_ue_byp) )
+    //phy_adjust_gain(phy_vars_ue,0);
+    gain_control_all(dB_fixed(phy_vars_ue->PHY_measurements.rssi),0);
+
+#else
+#ifndef OAI_USRP
+#ifndef OAI_BLADERF 
+#ifndef OAI_LMSSDR
+  phy_adjust_gain(phy_vars_ue,dB_fixed(phy_vars_ue->PHY_measurements.rssi),0);
+#endif
+#endif
+#endif
+#endif
+  }
+
   //  exit_fun("debug exit");
   return ret;
 }

openair1/PHY/LTE_TRANSPORT/print_stats.c

@@ -50,7 +50,7 @@
 #endif
 
 extern int mac_get_rrc_status(uint8_t Mod_id,uint8_t eNB_flag,uint8_t index);
-#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_BLADERF)
+#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
 #include "common_lib.h"
 extern openair0_config_t openair0_cfg[];
 #endif
@@ -97,20 +97,20 @@ int dump_ue_stats(PHY_VARS_UE *phy_vars_ue, char* buffer, int length, runmode_t
 #ifdef EXMIMO
     len += sprintf(&buffer[len], "[UE PROC] RX Gain %d dB (LNA %d, vga %d dB)\n",phy_vars_ue->rx_total_gain_dB, openair0_cfg[0].rxg_mode[0],(int)openair0_cfg[0].rx_gain[0]);
 #endif
-#if defined(OAI_USRP) || defined(OAI_BLADERF)
+#if defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
     len += sprintf(&buffer[len], "[UE PROC] RX Gain %d dB\n",phy_vars_ue->rx_total_gain_dB);
 #endif
-#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF)
+#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
     len += sprintf(&buffer[len], "[UE_PROC] Frequency offset %d Hz (%d), estimated carrier frequency %f Hz\n",phy_vars_ue->lte_ue_common_vars.freq_offset,openair_daq_vars.freq_offset,openair0_cfg[0].rx_freq[0]-phy_vars_ue->lte_ue_common_vars.freq_offset);
 #endif
     len += sprintf(&buffer[len], "[UE PROC] UE mode = %s (%d)\n",mode_string[phy_vars_ue->UE_mode[0]],phy_vars_ue->UE_mode[0]);
     len += sprintf(&buffer[len], "[UE PROC] timing_advance = %d\n",phy_vars_ue->timing_advance);
     if (phy_vars_ue->UE_mode[0]==PUSCH) {
       len += sprintf(&buffer[len], "[UE PROC] Po_PUSCH = %d dBm (PL %d dB, Po_NOMINAL_PUSCH %d dBm, PHR %d dB)\n", 
-		     PHY_vars_UE_g[0][0]->ulsch_ue[0]->Po_PUSCH,
+		     phy_vars_ue->ulsch_ue[0]->Po_PUSCH,
 		     get_PL(phy_vars_ue->Mod_id,phy_vars_ue->CC_id,0),
-		     mac_xface->get_Po_NOMINAL_PUSCH(phy_vars_ue->Mod_id,0),
-		     PHY_vars_UE_g[0][0]->ulsch_ue[0]->PHR);
+		     phy_vars_ue->lte_frame_parms.ul_power_control_config_common.p0_NominalPUSCH,
+		     phy_vars_ue->ulsch_ue[0]->PHR);
       len += sprintf(&buffer[len], "[UE PROC] Po_PUCCH = %d dBm (Po_NOMINAL_PUCCH %d dBm, g_pucch %d dB)\n", 
 		     get_PL(phy_vars_ue->Mod_id,phy_vars_ue->CC_id,0)+
 		     phy_vars_ue->lte_frame_parms.ul_power_control_config_common.p0_NominalPUCCH+
@@ -582,9 +582,7 @@ int dump_eNB_stats(PHY_VARS_eNB *phy_vars_eNB, char* buffer, int length)
       len += sprintf(&buffer[len],"%4d ",
                      phy_vars_eNB->PHY_measurements_eNB[eNB].n0_subband_power_tot_dBm[i]);
       if ((i>0) && ((i%25) == 0)) 
-	len += sprintf(&buffer[len],"\n                                 ",
-                     phy_vars_eNB->PHY_measurements_eNB[eNB].n0_subband_power_tot_dBm[i]);
-
+	len += sprintf(&buffer[len],"\n");
     }
     len += sprintf(&buffer[len],"\n");
     len += sprintf(&buffer[len],"\n[eNB PROC] PERFORMANCE PARAMETERS\n");
@@ -644,7 +642,6 @@ int dump_eNB_stats(PHY_VARS_eNB *phy_vars_eNB, char* buffer, int length)
 		     dB_fixed(phy_vars_eNB->eNB_UE_stats[UE_id].Po_PUCCH/phy_vars_eNB->lte_frame_parms.N_RB_UL)-phy_vars_eNB->rx_total_gain_eNB_dB,
 		     phy_vars_eNB->lte_frame_parms.ul_power_control_config_common.p0_NominalPUCCH,
 		     dB_fixed(phy_vars_eNB->eNB_UE_stats[UE_id].Po_PUCCH1_below/phy_vars_eNB->lte_frame_parms.N_RB_UL)-phy_vars_eNB->rx_total_gain_eNB_dB,
-		     dB_fixed(phy_vars_eNB->eNB_UE_stats[UE_id].Po_PUCCH1_above/phy_vars_eNB->lte_frame_parms.N_RB_UL)-phy_vars_eNB->rx_total_gain_eNB_dB,
 		     PUCCH1_THRES+phy_vars_eNB->PHY_measurements_eNB[0].n0_power_tot_dBm-dB_fixed(phy_vars_eNB->lte_frame_parms.N_RB_UL),
                      phy_vars_eNB->eNB_UE_stats[UE_id].sector);
 

openair1/PHY/TOOLS/cmult_mm.c

-/*******************************************************************************
-    OpenAirInterface
-    Copyright(c) 1999 - 2014 Eurecom
-
-    OpenAirInterface is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-
-    OpenAirInterface is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with OpenAirInterface.The full GNU General Public License is
-   included in this distribution in the file called "COPYING". If not,
-   see <http://www.gnu.org/licenses/>.
-
-  Contact Information
-  OpenAirInterface Admin: openair_admin@eurecom.fr
-  OpenAirInterface Tech : openair_tech@eurecom.fr
-  OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
-
-  Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
-
- *******************************************************************************/
-#include "defs.h"
-
-int mult_cpx_matrix_h(short *x1[2][2],
-                      short *x2[2][2],
-                      short *y[2][2],
-                      unsigned int N,
-                      unsigned short output_shift,
-                      short hermitian)
-{
-
-  if (hermitian) {
-    // this computes x1^H*x2 and stores it in y
-    mult_cpx_vector_h(x2[0][0],x1[0][0],y[0][0],N,output_shift,1);
-    mult_cpx_vector_h(x2[0][1],x1[0][1],y[0][0],N,output_shift,1);
-    mult_cpx_vector_h(x2[0][0],x1[1][0],y[1][0],N,output_shift,1);
-    mult_cpx_vector_h(x2[0][1],x1[1][1],y[1][0],N,output_shift,1);
-    mult_cpx_vector_h(x2[1][0],x1[0][0],y[0][1],N,output_shift,1);
-    mult_cpx_vector_h(x2[1][1],x1[0][1],y[0][1],N,output_shift,1);
-    mult_cpx_vector_h(x2[1][0],x1[1][0],y[1][1],N,output_shift,1);
-    mult_cpx_vector_h(x2[1][1],x1[1][1],y[1][1],N,output_shift,1);
-  } else {
-    // this computes x1*x2^H and stores it in y
-    mult_cpx_vector_h(x1[0][0],x2[0][0],y[0][0],N,output_shift,1);
-    mult_cpx_vector_h(x1[0][1],x2[0][1],y[0][0],N,output_shift,1);
-    mult_cpx_vector_h(x1[0][0],x2[1][0],y[0][1],N,output_shift,1);
-    mult_cpx_vector_h(x1[0][1],x2[1][1],y[0][1],N,output_shift,1);
-    mult_cpx_vector_h(x1[1][0],x2[0][0],y[1][0],N,output_shift,1);
-    mult_cpx_vector_h(x1[1][1],x2[0][1],y[1][0],N,output_shift,1);
-    mult_cpx_vector_h(x1[1][0],x2[1][0],y[1][1],N,output_shift,1);
-    mult_cpx_vector_h(x1[1][1],x2[1][1],y[1][1],N,output_shift,1);
-  }
-}
-
-int mult_cpx_matrix_vector(int *x1[2][2],
-                           int *x2[2],
-                           int *y[2],
-                           unsigned int N,
-                           unsigned short output_shift)
-{
-
-  Zero_Buffer(y[0],N*8);
-  Zero_Buffer(y[1],N*8);
-
-  // this computes x1*x2 and stores it in y (32 bit)
-  mult_cpx_vector_add32((short*)x2[0],(short*)x1[0][0],(short*)y[0],N);
-  mult_cpx_vector_add32((short*)x2[1],(short*)x1[0][1],(short*)y[0],N);
-  mult_cpx_vector_add32((short*)x2[0],(short*)x1[1][0],(short*)y[1],N);
-  mult_cpx_vector_add32((short*)x2[1],(short*)x1[1][1],(short*)y[1],N);
-
-  // shift and pack
-  shift_and_pack((short*)y[0],N,output_shift);
-  shift_and_pack((short*)y[1],N,output_shift);
-
-}
-
-#ifdef MAIN_MM
-#include <stdio.h>
-#include <stdlib.h>
-main ()
-{
-  short x1_00[256] __attribute__((aligned(16)));
-  short x1_10[256] __attribute__((aligned(16)));
-  short x1_01[256] __attribute__((aligned(16)));
-  short x1_11[256] __attribute__((aligned(16)));
-  short x2_0[256] __attribute__((aligned(16)));
-  short x2_1[256] __attribute__((aligned(16)));
-  short y_0[256] __attribute__((aligned(16)));
-  short y_1[256] __attribute__((aligned(16)));
-
-  int *x1[2][2];
-  int *x2[2];
-  int *y[2];
-  int i,m,n;
-
-  x1[0][0] = (int*)x1_00;
-  x1[0][1] = (int*)x1_01;
-  x1[1][0] = (int*)x1_10;
-  x1[1][1] = (int*)x1_11;
-  x2[0] = (int*)x2_0;
-  x2[1] = (int*)x2_1;
-  y[0] = (int*)y_0;
-  y[1] = (int*)y_1;
-
-  for(m=0; m<2; m++) {
-    for(n=0; n<2; n++) {
-      for(i=0; i<256; i+=4) {
-        ((short*)x1[m][n])[i] = ((short) rand())/4;
-        ((short*)x1[m][n])[i+1] = ((short) rand())/4;
-        ((short*)x1[m][n])[i+2] = -((short*)x1[m][n])[i+1];
-        ((short*)x1[m][n])[i+3] = ((short*)x1[m][n])[i];
-      }
-    }
-
-    for(i=0; i<256; i+=4) {
-      ((short*)x2[m])[i] = ((short) rand())/4;
-      ((short*)x2[m])[i+1] = ((short) rand())/4;
-      ((short*)x2[m])[i+2] = ((short*)x2[m])[i];
-      ((short*)x2[m])[i+3] = ((short*)x2[m])[i+1];
-    }
-
-    Zero_Buffer(y[m],512);
-  }
-
-  /*
-  input[0] = 100;
-  input[1] = 200;
-  input[2] = -200;
-  input[3] = 100;
-  input[4] = 1000;
-  input[5] = 2000;
-  input[6] = -2000;
-  input[7] = 1000;
-  input[8] = 100;
-  input[9] = 200;
-  input[10] = -200;
-  input[11] = 100;
-  input[12] = 1000;
-  input[13] = 2000;
-  input[14] = -2000;
-  input[15] = 1000;
-
-  input2[0] = 2;
-  input2[1] = 1;
-  input2[2] = 2;
-  input2[3] = 1;
-  input2[4] = 20;
-  input2[5] = 10;
-  input2[6] = 20;
-  input2[7] = 10;
-  input2[8] = 2;
-  input2[9] = 1;
-  input2[10] = 2;
-  input2[11] = 1;
-  input2[12] = 2000;
-  input2[13] = 1000;
-  input2[14] = 2000;
-  input2[15] = 1000;
-
-  x1[0][0] = (int*)input;
-  x1[0][1] = (int*)input;
-  x1[1][0] = (int*)input;
-  x1[1][1] = (int*)input;
-
-  x2[0] = (int*)input2;
-  x2[1] = (int*)input2;
-
-  y[0] = (int*)output;
-  y[1] = (int*)output2;
-  */
-
-  mult_cpx_matrix_vector(x1,x2,y,64,15);
-
-  //mult_cpx_vector_add32(x2[0],x1[0][0],y[0],64);
-
-  for (i=0; i<128; i+=2)
-    printf("i=%d, x1 = [%d+1i*%d %d+1i*%d; %d+1i*%d %d+1i*%d]; x2 = [%d+1i*%d; %d+1i*%d]; y = [%d+1i*%d; %d+1i*%d]; y_m= round(x1*x2./pow2(15)); y-y_m \n",
-           i,
-           ((short*)x1[0][0])[2*i],  ((short*)x1[0][0])[2*i+2],
-           ((short*)x1[0][1])[2*i],  ((short*)x1[0][1])[2*i+2],
-           ((short*)x1[1][0])[2*i],  ((short*)x1[1][0])[2*i+2],
-           ((short*)x1[1][1])[2*i],  ((short*)x1[1][1])[2*i+2],
-           ((short*)x2[0])[2*i],  ((short*)x2[0])[2*i+1],
-           ((short*)x2[1])[2*i],  ((short*)x2[1])[2*i+1],
-           ((short*)y[0])[2*i],  ((short*)y[0])[2*i+1],
-           ((short*)y[1])[2*i],  ((short*)y[1])[2*i+1]);
-
-  //((int*)y[0])[i],  ((int*)y[0])[i+1],
-  //((int*)y[1])[i],  ((int*)y[1])[i+1]);
-
-}
-
-#endif

openair1/PHY/TOOLS/cmult_vv.c

@@ -50,7 +50,7 @@ int mult_cpx_conj_vector(int16_t *x1,
                          uint32_t N,
                          int output_shift)
 {
-  // Multiply elementwise two complex vectors of N elements with repeated formatted output
+  // Multiply elementwise the complex conjugate of x1 with x2. 
   // x1       - input 1    in the format  |Re0 Im0 Re1 Im1|,......,|Re(N-2)  Im(N-2) Re(N-1) Im(N-1)|
   //            We assume x1 with a dinamic of 15 bit maximum
   //
@@ -90,7 +90,7 @@ int mult_cpx_conj_vector(int16_t *x1,
     tmp_im = _mm_shufflelo_epi16(*x1_128,_MM_SHUFFLE(2,3,0,1));
     tmp_im = _mm_shufflehi_epi16(tmp_im,_MM_SHUFFLE(2,3,0,1));
     tmp_im = _mm_sign_epi16(tmp_im,*(__m128i*)&conjug[0]);
-    tmp_im = _mm_madd_epi16(tmp_im,*x1_128);
+    tmp_im = _mm_madd_epi16(tmp_im,*x2_128);
     tmp_re = _mm_srai_epi32(tmp_re,output_shift);
     tmp_im = _mm_srai_epi32(tmp_im,output_shift);
     tmpy0  = _mm_unpacklo_epi32(tmp_re,tmp_im);
@@ -130,3 +130,4 @@ int mult_cpx_conj_vector(int16_t *x1,
 
   return(0);
 }
+

openair1/PHY/TOOLS/lte_phy_scope.c

@@ -88,7 +88,7 @@ FD_lte_phy_scope_enb *create_lte_phy_scope_enb( void )
   fl_set_object_boxtype( fdui->rxsig_t, FL_EMBOSSED_BOX );
   fl_set_object_color( fdui->rxsig_t, FL_BLACK, FL_RED );
   fl_set_object_lcolor( fdui->rxsig_t, FL_WHITE ); // Label color
-  fl_set_xyplot_ybounds(fdui->rxsig_t,30,70);
+  fl_set_xyplot_ybounds(fdui->rxsig_t,10,70);
 
   // Time-domain channel response
   fdui->chest_t = fl_add_xyplot( FL_NORMAL_XYPLOT, 410, 20, 370, 100, "Channel Impulse Response (samples, abs)" );
@@ -396,7 +396,7 @@ FD_lte_phy_scope_ue *create_lte_phy_scope_ue( void )
   fl_set_object_boxtype( fdui->rxsig_t, FL_EMBOSSED_BOX );
   fl_set_object_color( fdui->rxsig_t, FL_BLACK, FL_RED );
   fl_set_object_lcolor( fdui->rxsig_t, FL_WHITE ); // Label color
-  fl_set_xyplot_ybounds(fdui->rxsig_t,30,70);
+  fl_set_xyplot_ybounds(fdui->rxsig_t,10,70);
 
   // Time-domain channel response
   fdui->chest_t = fl_add_xyplot( FL_NORMAL_XYPLOT, 410, 20, 370, 100, "Channel Impulse Response (samples, abs)" );

openair1/PHY/TOOLS/time_meas.h

@@ -26,6 +26,9 @@
   Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
 
  *******************************************************************************/
+#ifndef __TIME_MEAS_DEFS__H__
+#define __TIME_MEAS_DEFS__H__
+
 #include <unistd.h>
 #include <math.h>
 #include <stdint.h>
@@ -148,3 +151,4 @@ static inline void copy_meas(time_stats_t *dst_ts,time_stats_t *src_ts)
     dst_ts->max=src_ts->max;
   }
 }
+#endif

openair1/PHY/defs.h

@@ -278,6 +278,9 @@ typedef struct PHY_VARS_eNB_s {
   int              **dl_precoder_SeNB[3];
   char             log2_maxp; /// holds the maximum channel/precoder coefficient
 
+  /// if ==0 enables phy only test mode
+  int mac_enabled;
+
   /// For emulation only (used by UE abstraction to retrieve DCI)
   uint8_t num_common_dci[2];                         // num_dci in even/odd subframes
   uint8_t num_ue_spec_dci[2];                         // num_dci in even/odd subframes
@@ -579,6 +582,9 @@ typedef struct {
   /// holds the maximum channel/precoder coefficient
   char             log2_maxp;
 
+  /// if ==0 enables phy only test mode
+  int mac_enabled;
+
   /// Flag to initialize averaging of PHY measurements
   int init_averaging;
 

openair1/SIMULATION/LTE_PHY/dlsim.c

@@ -61,25 +61,7 @@
 extern unsigned int dlsch_tbs25[27][25],TBStable[27][110];
 extern unsigned char offset_mumimo_llr_drange_fix;
 
-#ifdef XFORMS
 #include "PHY/TOOLS/lte_phy_scope.h"
-#endif
-
-
-
-//#define AWGN
-//#define NO_DCI
-
-
-
-//#define ABSTRACTION
-
-/*
-  #define RBmask0 0x00fc00fc
-  #define RBmask1 0x0
-  #define RBmask2 0x0
-  #define RBmask3 0x0
-*/
 
 PHY_VARS_eNB *PHY_vars_eNB;
 PHY_VARS_UE *PHY_vars_UE;
@@ -237,10 +219,9 @@ int main(int argc, char **argv)
   short *uncoded_ber_bit=NULL;
   uint8_t N_RB_DL=25,osf=1;
   frame_t frame_type = FDD;
-#ifdef XFORMS
+  int xforms=0;
   FD_lte_phy_scope_ue *form_ue;
   char title[255];
-#endif
   uint32_t DLSCH_RB_ALLOC = 0x1fff;
   int numCCE=0;
   int dci_length_bytes=0,dci_length=0;
@@ -305,7 +286,7 @@ int main(int argc, char **argv)
   //  num_layers = 1;
   perfect_ce = 0;
 
-  while ((c = getopt (argc, argv, "ahdpZDe:Em:n:o:s:f:t:c:g:r:F:x:y:z:AM:N:I:i:O:R:S:C:T:b:u:v:w:B:PLl:Y")) != -1) {
+  while ((c = getopt (argc, argv, "ahdpZDe:Em:n:o:s:f:t:c:g:r:F:x:y:z:AM:N:I:i:O:R:S:C:T:b:u:v:w:B:PLl:XY")) != -1) {
     switch (c) {
     case 'a':
       awgn_flag = 1;
@@ -557,6 +538,10 @@ int main(int argc, char **argv)
 
       break;
 
+    case 'X':
+      xforms=1;
+      break;
+
     case 'Y':
       perfect_ce=1;
       break;
@@ -636,7 +621,7 @@ int main(int argc, char **argv)
   if ((transmission_mode > 1) && (n_tx != 2))
     printf("n_tx must be >1 for transmission_mode %d\n",transmission_mode);
 
-#ifdef XFORMS
+  if (xforms==1) {
     fl_initialize (&argc, argv, NULL, 0, 0);
     form_ue = create_lte_phy_scope_ue();
     sprintf (title, "LTE PHY SCOPE eNB");
@@ -648,15 +633,24 @@ int main(int argc, char **argv)
       fl_set_object_label(form_ue->button_0, "IA Receiver ON");
       fl_set_object_color(form_ue->button_0, FL_GREEN, FL_GREEN);
     }
-
-#endif
+  }
 
   if (transmission_mode==5) {
     n_users = 2;
     printf("dual_stream_UE=%d\n", dual_stream_UE);
   }
 
-  lte_param_init(n_tx,n_rx,transmission_mode,extended_prefix_flag,frame_type,Nid_cell,tdd_config,N_RB_DL,threequarter_fs,osf,perfect_ce);
+  lte_param_init(n_tx,
+		 n_rx,
+		 transmission_mode,
+		 extended_prefix_flag,
+		 frame_type,
+		 Nid_cell,
+		 tdd_config,
+		 N_RB_DL,
+		 threequarter_fs,
+		 osf,
+		 perfect_ce);
 
 
     
@@ -3486,13 +3480,13 @@ PMI_FEEDBACK:
             //      PHY_vars_UE->dlsch_ue[0][0]->harq_processes[0]->round++;
           }
 
-#ifdef XFORMS
+	  if (xforms==1) {
 	    phy_scope_UE(form_ue,
 			 PHY_vars_UE,
 			 eNB_id,
 			 0,// UE_id
 			 subframe);
-#endif
+	  }
 
         }  //round
 

openair1/SIMULATION/LTE_PHY/mbmssim.c

@@ -173,7 +173,9 @@ int main(int argc, char **argv)
 
   lte_frame_type_t frame_type = FDD;
 
+  uint32_t Nsoft = 1827072;
 
+  /*
 #ifdef XFORMS
   FD_lte_phy_scope_ue *form_ue;
   char title[255];
@@ -183,6 +185,7 @@ int main(int argc, char **argv)
   sprintf (title, "LTE DL SCOPE UE");
   fl_show_form (form_ue->lte_phy_scope_ue, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
 #endif
+  */
 
   logInit();
   number_of_cards = 1;
@@ -382,14 +385,14 @@ int main(int argc, char **argv)
                                 0);
 
   // Create transport channel structures for 2 transport blocks (MIMO)
-  PHY_vars_eNB->dlsch_eNB_MCH = new_eNB_dlsch(1,8,N_RB_DL,0);
+  PHY_vars_eNB->dlsch_eNB_MCH = new_eNB_dlsch(1,8,Nsoft,N_RB_DL,0);
 
   if (!PHY_vars_eNB->dlsch_eNB_MCH) {
     printf("Can't get eNB dlsch structures\n");
     exit(-1);
   }
 
-  PHY_vars_UE->dlsch_ue_MCH[0]  = new_ue_dlsch(1,8,MAX_TURBO_ITERATIONS_MBSFN,N_RB_DL,0);
+  PHY_vars_UE->dlsch_ue_MCH[0]  = new_ue_dlsch(1,8,Nsoft,MAX_TURBO_ITERATIONS_MBSFN,N_RB_DL,0);
 
   PHY_vars_eNB->lte_frame_parms.num_MBSFN_config = 1;
   PHY_vars_eNB->lte_frame_parms.MBSFN_config[0].radioframeAllocationPeriod = 0;

openair1/SIMULATION/LTE_PHY/ulsim.c

@@ -52,9 +52,7 @@
 #include "LAYER2/MAC/vars.h"
 #include "OCG_vars.h"
 
-#ifdef XFORMS
 #include "PHY/TOOLS/lte_phy_scope.h"
-#endif
 
 extern unsigned short dftsizes[33];
 extern short *ul_ref_sigs[30][2][33];
@@ -74,12 +72,9 @@ node_desc_t *ue_data[NUMBER_OF_UE_MAX];
 extern uint16_t beta_ack[16],beta_ri[16],beta_cqi[16];
 //extern  char* namepointer_chMag ;
 
-
-
-#ifdef XFORMS
+int xforms=0;
 FD_lte_phy_scope_enb *form_enb;
 char title[255];
-#endif
 
 /*the following parameters are used to control the processing times*/
 double t_tx_max = -1000000000; /*!< \brief initial max process time for tx */
@@ -194,6 +189,7 @@ int main(int argc, char **argv)
   int nb_rb_set = 0;
   int sf;
 
+  int threequarter_fs=0;
   opp_enabled=1; // to enable the time meas
 
   cpu_freq_GHz = (double)get_cpu_freq_GHz();
@@ -203,7 +199,7 @@ int main(int argc, char **argv)
 
   logInit();
 
-  while ((c = getopt (argc, argv, "hapZbm:n:Y:X:x:s:w:e:q:d:D:O:c:r:i:f:y:c:oA:C:R:g:N:l:S:T:QB:PI:L")) != -1) {
+  while ((c = getopt (argc, argv, "hapZEbm:n:Y:X:x:s:w:e:q:d:D:O:c:r:i:f:y:c:oA:C:R:g:N:l:S:T:QB:PI:LF")) != -1) {
     switch (c) {
     case 'a':
       channel_model = AWGN;
@@ -373,6 +369,10 @@ int main(int argc, char **argv)
       cyclic_shift = atoi(optarg);
       break;
 
+    case 'E':
+      threequarter_fs=1;
+      break;
+
     case 'N':
       N0 = atoi(optarg);
       break;
@@ -449,6 +449,10 @@ int main(int argc, char **argv)
       max_turbo_iterations=atoi(optarg);
       break;
 
+    case 'F':
+      xforms=1;
+      break;
+
     case 'Z':
       dump_table = 1;
       break;
@@ -470,6 +474,7 @@ int main(int argc, char **argv)
 		 0,
 		 tdd_config,
 		 N_RB_DL,
+		 threequarter_fs,
 		 osf,
 		 0);
 
@@ -588,12 +593,12 @@ int main(int argc, char **argv)
   }
 
 
-#ifdef XFORMS
+  if (xforms==1) {
     fl_initialize (&argc, argv, NULL, 0, 0);
     form_enb = create_lte_phy_scope_enb();
     sprintf (title, "LTE PHY SCOPE eNB");
     fl_show_form (form_enb->lte_phy_scope_enb, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
-#endif
+  }
 
   PHY_vars_UE->lte_ue_pdcch_vars[0]->crnti = 14;
 
@@ -1348,9 +1353,9 @@ int main(int argc, char **argv)
         if ((errs[0]>=100) && (trials>(n_frames/2)))
           break;
 
-#ifdef XFORMS
+	if (xforms==1)
 	  phy_scope_eNB(form_enb,PHY_vars_eNB,0);
-#endif
+
         /*calculate the total processing time for each packet, get the max, min, and number of packets that exceed t>3000us*/
 
         double t_tx = (double)PHY_vars_UE->phy_proc_tx.p_time/cpu_freq_GHz/1000.0;

openair2/COMMON/commonDef.h

@@ -48,7 +48,19 @@ Description Contains global common definitions
 
 #include <stdint.h>
 #include <stddef.h>
+#include <stdbool.h>
 
+typedef signed char        boolean_t;
+
+#if !defined(TRUE)
+#define TRUE               (boolean_t)0x01
+#endif
+
+#if !defined(FALSE)
+#define FALSE              (boolean_t)0x00
+#endif
+
+#define BOOL_NOT(b) (b^TRUE)
 
 #define NAS_UE_ID_FMT "0x%06x"
 
@@ -59,13 +71,6 @@ Description Contains global common definitions
 #define RETURNok        (0)
 #define RETURNerror     (-1)
 
-#ifndef FALSE
-#define FALSE           (0)
-#endif
-#ifndef TRUE
-#define TRUE            (1)
-#endif
-
 /*
  * Name of the environment variable which defines the default directory
  * where the NAS application is executed and where are located files

openair2/COMMON/s1ap_messages_types.h

@@ -112,7 +112,7 @@ typedef struct net_ip_address_s {
   unsigned ipv4:1;
   unsigned ipv6:1;
   char ipv4_address[16];
-  char ipv6_address[40];
+  char ipv6_address[46];
 } net_ip_address_t;
 
 typedef uint64_t bitrate_t;

openair2/ENB_APP/enb_config.h

@@ -86,7 +86,14 @@ typedef struct rrh_gw_config_s {
   char     *remote_address;
   uint16_t  local_port;
   uint16_t  remote_port;
-
+  int tx_scheduling_advance;
+  int tx_sample_advance;
+  int iq_txshift;
+  unsigned  exmimo:1;
+  unsigned  usrp_b200:1;
+  unsigned  usrp_x300:1;
+  unsigned  bladerf:1; 
+  unsigned  lmssdr:1;  
 } rrh_gw_config_t;
 
 typedef struct Enb_properties_s {
@@ -257,6 +264,7 @@ typedef struct Enb_properties_array_s {
   Enb_properties_t    *properties[MAX_ENB];
 } Enb_properties_array_t;
 
+void                          enb_config_display(void);
 const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP);
 
 const Enb_properties_array_t *enb_config_get(void);