update ethernet library wrt changes in openair0_device - add packet sequence number

targets/ARCH/ETHERNET/USERSPACE/LIB/eth_raw.c

@@ -52,7 +52,7 @@
 #include "common_lib.h"
 #include "ethernet_lib.h"
 
-#define DEBUG 1
+#define DEBUG 0
 
 struct sockaddr_ll dest_addr[MAX_INST];
 struct sockaddr_ll local_addr[MAX_INST];
@@ -275,7 +275,7 @@ int eth_set_dev_conf_raw(openair0_device *device) {
 
   
   memcpy(msg,(void*)&eh,MAC_HEADER_SIZE_BYTES);	
-  memcpy((msg+MAC_HEADER_SIZE_BYTES),(void*)&device->openair0_cfg,sizeof(openair0_config_t));
+  memcpy((msg+MAC_HEADER_SIZE_BYTES),(void*)device->openair0_cfg,sizeof(openair0_config_t));
  	  
   if (send(eth->sockfd[Mod_id],
 	     msg,
@@ -311,7 +311,8 @@ int eth_get_dev_conf_raw(openair0_device *device) {
   
   /* RRH stores the remote MAC address */
   memcpy(eh.ether_dhost,(msg+ETH_ALEN),ETH_ALEN);	
-  memcpy((void*)&device->openair0_cfg,(msg + MAC_HEADER_SIZE_BYTES), sizeof(openair0_config_t));
+  //memcpy((void*)&device->openair0_cfg,(msg + MAC_HEADER_SIZE_BYTES), sizeof(openair0_config_t));
+  device->openair0_cfg=(openair0_config_t *)(msg + MAC_HEADER_SIZE_BYTES);
   printf("[%s] binding mod_%d to hardware address %x:%x:%x:%x:%x:%x           hardware address %x:%x:%x:%x:%x:%x\n",((device->host_type == BBU_HOST) ? "BBU": "RRH"),Mod_id,eh.ether_shost[0],eh.ether_shost[1],eh.ether_shost[2],eh.ether_shost[3],eh.ether_shost[4],eh.ether_shost[5],eh.ether_dhost[0],eh.ether_dhost[1],eh.ether_dhost[2],eh.ether_dhost[3],eh.ether_dhost[4],eh.ether_dhost[5]);
  	  
   return 0;

targets/ARCH/ETHERNET/USERSPACE/LIB/eth_udp.c

@@ -48,6 +48,7 @@
 #include <netinet/ether.h>
 #include <unistd.h>
 #include <errno.h>
+#include "vcd_signal_dumper.h"
 
 #include "common_lib.h"
 #include "ethernet_lib.h"
@@ -58,6 +59,10 @@ struct sockaddr_in local_addr[MAX_INST];
 int addr_len[MAX_INST];
 
 
+uint16_t pck_seq_num = 1;
+uint16_t pck_seq_num_cur=0;
+uint16_t pck_seq_num_prev=0;
+
  int eth_socket_init_udp(openair0_device *device) {
 
   int i = 0;
@@ -122,9 +127,6 @@ int addr_len[MAX_INST];
     exit(0);
   }
   
-  /* apply additional configuration */
-  //ethernet_tune (device,MTU_SIZE,UDP_PACKET_SIZE_BYTES(device->openair0_cfg->samples_per_packet));
-  
   /* want to receive -> so bind */   
     if (bind(eth->sockfd[Mod_id],(struct sockaddr *)&local_addr[Mod_id],addr_len[Mod_id])<0) {
       perror("ETHERNET: Cannot bind to socket");
@@ -133,8 +135,6 @@ int addr_len[MAX_INST];
       printf("[%s] binding mod_%d to %s:%d\n","RRH",Mod_id,str_local,ntohs(local_addr[Mod_id].sin_port));
     }
  
-    printf("ssssssssssssssss\n");
-
   return 0;
 }
 
@@ -159,9 +159,14 @@ int trx_eth_write_udp(openair0_device *device, openair0_timestamp timestamp, voi
     
     bytes_sent = 0;
     
-    *(int16_t *)(buff2 + sizeof(int16_t))=1+(i<<1);
+    /* constract application header */
+    // eth->pck_header.seq_num = pck_seq_num;
+    //eth->pck_header.antenna_id = 1+(i<<1);
+    //eth->pck_header.timestamp = timestamp;
+    *(uint16_t *)buff2 = pck_seq_num;
+    *(uint16_t *)(buff2 + sizeof(uint16_t)) = 1+(i<<1);
     *(openair0_timestamp *)(buff2 + sizeof(int32_t)) = timestamp;
-    
+    VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TX_SEQ_NUM, pck_seq_num);
 
     while(bytes_sent < UDP_PACKET_SIZE_BYTES(nsamps)) {
 #if DEBUG   
@@ -193,6 +198,8 @@ int trx_eth_write_udp(openair0_device *device, openair0_timestamp timestamp, voi
 #endif
     eth->tx_actual_nsamps=bytes_sent>>2;
     eth->tx_count++;
+    pck_seq_num++;
+    if ( pck_seq_num > MAX_PACKET_SEQ_NUM(nsamps,76800) )  pck_seq_num = 1;
       }
     }              
       /* tx buffer values restored */  
@@ -278,14 +285,23 @@ int trx_eth_read_udp(openair0_device *device, openair0_timestamp *timestamp, voi
 		  bytes_received);
 	   dump_packet((device->host_type == BBU_HOST)? "BBU":"RRH", buff2, UDP_PACKET_SIZE_BYTES(nsamps),RX_FLAG);	  
 #endif  
+	   
 	   /* store the timestamp value from packet's header */
-	   if (prev_timestamp == -1) {
-	     prev_timestamp = *(openair0_timestamp *)(buff2 + sizeof(int32_t));
+	   *timestamp =  *(openair0_timestamp *)(buff2 + sizeof(int32_t));
+	   /* store the sequence number of the previous packet received */    
+	   if (pck_seq_num_cur == 0) {
+	     pck_seq_num_prev = *(uint16_t *)buff2;
 	   } else {
-	     prev_timestamp =timestamp;
+	     pck_seq_num_prev = pck_seq_num_cur;
 	   }
-	   /* store the timestamp value from packet's header */
-	   *timestamp =  *(openair0_timestamp *)(buff2 + sizeof(int32_t));
+	   /* get the packet sequence number from packet's header */
+	   pck_seq_num_cur = *(uint16_t *)buff2;
+	   //printf("cur=%d prev=%d buff=%d\n",pck_seq_num_cur,pck_seq_num_prev,*(uint16_t *)(buff2));
+	   if ( ( pck_seq_num_cur != (pck_seq_num_prev + 1) ) && !((pck_seq_num_prev==75) && (pck_seq_num_cur==1 ))){
+	     printf("out of order packet received1! %d|%d|%d\n",pck_seq_num_cur,pck_seq_num_prev,	*timestamp);
+	   }
+	   VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_RX_SEQ_NUM,pck_seq_num_cur);
+	   VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_RX_SEQ_NUM_PRV,pck_seq_num_prev);
 						    eth->rx_actual_nsamps=bytes_received>>2;
 						    eth->rx_count++;
 						    }	 
@@ -316,7 +332,7 @@ int eth_set_dev_conf_udp(openair0_device *device) {
 
   msg=malloc(sizeof(openair0_config_t));
   msg_len=sizeof(openair0_config_t);
-  memcpy(msg,(void*)&device->openair0_cfg,msg_len);	
+  memcpy(msg,(void*)device->openair0_cfg,msg_len);	
   
   if (sendto(eth->sockfd[Mod_id],msg,msg_len,0,(struct sockaddr *)&dest_addr[Mod_id],addr_len[Mod_id])==-1) {
     perror("ETHERNET: ");
@@ -350,7 +366,7 @@ int eth_get_dev_conf_udp(openair0_device *device) {
     perror("ETHERNET: ");
     exit(0);
   }
-   memcpy((void*)&device->openair0_cfg,msg,msg_len);
+  device->openair0_cfg=(openair0_config_t *)msg;
 
    /* get remote ip address and port */
    /* inet_ntop(AF_INET, &(dest_addr[Mod_id].sin_addr), str1, INET_ADDRSTRLEN); */

targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c

@@ -82,8 +82,11 @@ int trx_eth_start(openair0_device *device) {
       if(eth_get_dev_conf_udp(device)!=0)  return -1;
     }
     /* adjust MTU wrt number of samples per packet */
-    if(ethernet_tune (device,MTU_SIZE,UDP_PACKET_SIZE_BYTES(device->openair0_cfg->samples_per_packet))!=0)  return -1;
+    //if(ethernet_tune (device,MTU_SIZE,UDP_PACKET_SIZE_BYTES(device->openair0_cfg->samples_per_packet))!=0)  return -1;
   }
+  /* apply additional configuration */
+  if(ethernet_tune (device, SND_BUF_SIZE,2000000000)!=0)  return -1;
+  if(ethernet_tune (device, RCV_BUF_SIZE,2000000000)!=0)  return -1;
   
   return 0;
 }
@@ -335,12 +338,16 @@ int ethernet_tune(openair0_device *device, unsigned int option, int value) {
 
 
 
-int transport_init(openair0_device *device, openair0_config_t *openair0_cfg, char *cfgfile) {
+int transport_init(openair0_device *device, openair0_config_t *openair0_cfg, eth_params_t * eth_params ) {
 
   eth_state_t *eth = (eth_state_t*)malloc(sizeof(eth_state_t));
   memset(eth, 0, sizeof(eth_state_t));
 
+  if (eth_params->transp_preference == 1) {
     eth->flags = ETH_RAW_MODE;
+  } else {
+    eth->flags = ETH_UDP_MODE;
+  }
   
   printf("[ETHERNET]: Initializing openair0_device for %s ...\n", ((device->host_type == BBU_HOST) ? "BBU": "RRH"));
   device->Mod_id           = num_devices_eth++;
@@ -362,13 +369,53 @@ int transport_init(openair0_device *device, openair0_config_t *openair0_cfg, cha
     device->trx_write_func   = trx_eth_write_udp;
     device->trx_read_func    = trx_eth_read_udp;     
   }
-  /*hardcoded!!!!*/
-  eth->if_name[device->Mod_id] = "eth0";
+
+  eth->if_name[device->Mod_id] = eth_params->local_if_name;
   device->priv = eth;
-  openair0_cfg->iq_txshift = 5;
-  openair0_cfg->iq_rxrescale = 15;
-  memcpy((void*)device->openair0_cfg,(void*)openair0_cfg,sizeof(openair0_config_t));
  	
+  /* device specific */
+  openair0_cfg[0].iq_txshift = 5;
+  openair0_cfg[0].iq_rxrescale = 15;
+  openair0_cfg[0].txlaunch_wait = 0;
+  openair0_cfg[0].txlaunch_wait_slotcount = 0;
+
+  /* RRH does not have any information to make this configuration atm */
+  if (device->host_type == BBU_HOST) {
+    /*Note scheduling advance values valid only for case 7680000 */    
+    switch ((int)openair0_cfg[0].sample_rate) {
+    case 30720000:
+      openair0_cfg[0].samples_per_packet    = 4096;
+      openair0_cfg[0].tx_sample_advance     = 0;
+      openair0_cfg[0].tx_scheduling_advance = 22*openair0_cfg[0].samples_per_packet;
+      break;
+    case 23040000:     
+      openair0_cfg[0].samples_per_packet    = 2048;
+      openair0_cfg[0].tx_sample_advance     = 0;
+      openair0_cfg[0].tx_scheduling_advance = 16*openair0_cfg[0].samples_per_packet;
+      break;
+    case 15360000:
+      openair0_cfg[0].samples_per_packet    = 2048;
+      openair0_cfg[0].tx_sample_advance     = 0;
+      openair0_cfg[0].tx_scheduling_advance = 10*openair0_cfg[0].samples_per_packet;
+      break;
+    case 7680000:
+      openair0_cfg[0].samples_per_packet    = 1024;
+      openair0_cfg[0].tx_sample_advance     = 0;
+      openair0_cfg[0].tx_scheduling_advance = 10*openair0_cfg[0].samples_per_packet;
+      break;
+    case 1920000:
+      openair0_cfg[0].samples_per_packet    = 256;
+      openair0_cfg[0].tx_sample_advance     = 0;
+      openair0_cfg[0].tx_scheduling_advance = 16*openair0_cfg[0].samples_per_packet;
+      break;
+    default:
+      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
+      exit(-1);
+      break;
+    }
+  }
+ 
+  device->openair0_cfg=&openair0_cfg[0];
   return 0;
 }
 
@@ -414,8 +461,7 @@ void dump_dev(openair0_device *device) {
 	device->openair0_cfg->tx_num_channels,device->openair0_cfg->rx_num_channels);
    printf("       Running flags: %s %s %s\n",      
 	((eth->flags & ETH_RAW_MODE)  ? "RAW socket mode - ":""),
-	((eth->flags & ETH_UDP_MODE)  ? "UDP socket mode - ":""),
-	((eth->flags & ETH_LOOP_MODE) ? "loopback mode - ":""));	  	
+	((eth->flags & ETH_UDP_MODE)  ? "UDP socket mode - ":""));	  	
   printf("       Number of iqs dumped when displaying packets: %i\n\n",eth->iqdumpcnt);   
   
 }

targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.h

@@ -53,33 +53,18 @@
 #define DEFAULT_IF   "lo"
 
 #define ETH_RAW_MODE        1
-#define ETH_UDP_MODE        (1<<1)
-#define ETH_LOOP_MODE       (1<<2)
+#define ETH_UDP_MODE        0
 
 #define TX_FLAG	        1
 #define RX_FLAG 	0
 
-
+#define MAX_PACKET_SEQ_NUM(spp,spf) (spf/spp)
 #define MAC_HEADER_SIZE_BYTES (sizeof(struct ether_header))
 #define APP_HEADER_SIZE_BYTES (sizeof(int32_t) + sizeof(openair0_timestamp))
 #define PAYLOAD_SIZE_BYTES(nsamps) (nsamps<<2)
 #define UDP_PACKET_SIZE_BYTES(nsamps) (APP_HEADER_SIZE_BYTES + PAYLOAD_SIZE_BYTES(nsamps))
 #define RAW_PACKET_SIZE_BYTES(nsamps) (APP_HEADER_SIZE_BYTES + MAC_HEADER_SIZE_BYTES + PAYLOAD_SIZE_BYTES(nsamps))
-/*
-#define RRH_DEST_MAC0	0x74
-#define RRH_DEST_MAC1	0xd4
-#define RRH_DEST_MAC2	0x35
-#define RRH_DEST_MAC3	0xcc
-#define RRH_DEST_MAC4	0x88
-#define RRH_DEST_MAC5	0x45
-
-#define BBU_DEST_MAC0	0xd4
-#define BBU_DEST_MAC1	0xbe
-#define BBU_DEST_MAC2	0xd9
-#define BBU_DEST_MAC3	0x22
-#define BBU_DEST_MAC4	0x0a
-#define BBU_DEST_MAC5	0xac
-*/
+
 
 /*!\brief opaque ethernet data structure */
 typedef struct {
@@ -142,12 +127,12 @@ typedef struct {
 
 /*!\brief packet header */
 typedef struct {
+  /*!\brief packet sequence number max value=packets per frame*/
+  uint16_t seq_num ;
+  /*!\brief antenna port used to resynchronize */
+  uint16_t antenna_id;
   /*!\brief packet's timestamp */ 
   openair0_timestamp timestamp;
-  /*!\brief variable declared for alignment purposes (sample size=32 bit)  */
-  int16_t not_used;
-  /*!\brief antenna port used to resynchronize */
-  int16_t antenna_id;
 } header_t;
 
 /*!\brief different options for ethernet tuning in socket and driver level */