#ifndef LTE_SOFTMODEM_H
#define LTE_SOFTMODEM_H
#define _GNU_SOURCE
#include <execinfo.h>
#include <fcntl.h>
#include <getopt.h>
#include <linux/sched.h>
#include "rt_wrapper.h"
#include <sched.h>
#include <signal.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <syscall.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/sysinfo.h>
#include <sys/types.h>
#include <unistd.h>
#include "threads_t.h"
#include "rt_wrapper.h"
#include "../../ARCH/COMMON/common_lib.h"
//#undef MALLOC
#include "assertions.h"
#include "msc.h"
#include "PHY/types.h"
#include "PHY/defs_eNB.h"
#include "PHY/defs_UE.h"
#include "flexran_agent.h"
#include "s1ap_eNB.h"
#include "SIMULATION/ETH_TRANSPORT/proto.h"
#include "proto_agent.h"
#include "executables/softmodem-common.h"
/***************************************************************************************************************************************/
/* command line options definitions, CMDLINE_XXXX_DESC macros are used to initialize paramdef_t arrays which are then used as argument
when calling config_get or config_getlist functions */
/*------------------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters defining UE running mode */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*------------------------------------------------------------------------------------------------------------------------------------------*/
#define CMDLINE_UEMODEPARAMS_DESC { \
{"calib-ue-rx", CONFIG_HLP_CALUER, 0, iptr:&rx_input_level_dBm, defintval:0, TYPE_INT, 0}, \
{"calib-ue-rx-med", CONFIG_HLP_CALUERM, 0, iptr:&rx_input_level_dBm, defintval:0, TYPE_INT, 0}, \
{"calib-ue-rx-byp", CONFIG_HLP_CALUERB, 0, iptr:&rx_input_level_dBm, defintval:0, TYPE_INT, 0}, \
{"debug-ue-prach", CONFIG_HLP_DBGUEPR, PARAMFLAG_BOOL, uptr:NULL, defuintval:1, TYPE_INT, 0}, \
{"no-L2-connect", CONFIG_HLP_NOL2CN, PARAMFLAG_BOOL, uptr:NULL, defuintval:1, TYPE_INT, 0}, \
{"calib-prach-tx", CONFIG_HLP_CALPRACH, PARAMFLAG_BOOL, uptr:NULL, defuintval:1, TYPE_INT, 0}, \
{"loop-memory", CONFIG_HLP_UELOOP, 0, strptr:&loopfile, defstrval:"iqs.in", TYPE_STRING,0}, \
{"ue-dump-frame", CONFIG_HLP_DUMPFRAME, PARAMFLAG_BOOL, iptr:&dumpframe, defintval:0, TYPE_INT, 0}, \
}
#define CMDLINE_CALIBUERX_IDX 0
#define CMDLINE_CALIBUERXMED_IDX 1
#define CMDLINE_CALIBUERXBYP_IDX 2
#define CMDLINE_DEBUGUEPRACH_IDX 3
#define CMDLINE_NOL2CONNECT_IDX 4
#define CMDLINE_CALIBPRACHTX_IDX 5
#define CMDLINE_MEMLOOP_IDX 6
#define CMDLINE_DUMPMEMORY_IDX 7
/*------------------------------------------------------------------------------------------------------------------------------------------*/
/* help strings definition for command line options, used in CMDLINE_XXX_DESC macros and printed when -h option is used */
#define CONFIG_HLP_SIML1 "activate RF simulator instead of HW\n"
#define CONFIG_HLP_NUMUE "number of UE instances\n"
#define CONFIG_HLP_UERXG "set UE RX gain\n"
#define CONFIG_HLP_UERXGOFF "external UE amplifier offset\n"
#define CONFIG_HLP_UETXG "set UE TX gain\n"
#define CONFIG_HLP_UENANTR "set UE number of rx antennas\n"
#define CONFIG_HLP_UENANTT "set UE number of tx antennas\n"
#define CONFIG_HLP_UESCAN "set UE to scan around carrier\n"
#define CONFIG_HLP_EMULIFACE "Set the interface name for the multicast transport for emulation mode (e.g. eth0, lo, etc.) \n"
#define CONFIG_HLP_PRB "Set the PRB, valid values: 6, 25, 50, 100 \n"
#define CONFIG_HLP_DLSHIFT "dynamic shift for LLR compuation for TM3/4 (default 0)\n"
#define CONFIG_HLP_USRP_ARGS "set the arguments to identify USRP (same syntax as in UHD)\n"
#define CONFIG_HLP_DMAMAP "sets flag for improved EXMIMO UE performance\n"
#define CONFIG_HLP_TDD "Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n"
#define CONFIG_HLP_TADV "Set timing_advance\n"
/*-------------------------------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters specific to UE */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*-------------------------------------------------------------------------------------------------------------------------------------------------------*/
#define CMDLINE_UEPARAMS_DESC { \
{"siml1", CONFIG_HLP_SIML1, PARAMFLAG_BOOL, iptr:&simL1flag, defintval:0, TYPE_INT, 0}, \
{"U", CONFIG_HLP_NUMUE, 0, u16ptr:&NB_UE_INST, defuintval:1, TYPE_UINT16, 0}, \
{"ue-rxgain", CONFIG_HLP_UERXG, 0, dblptr:&(rx_gain[0][0]), defdblval:130, TYPE_DOUBLE, 0}, \
{"ue-rxgain-off", CONFIG_HLP_UERXGOFF, 0, dblptr:&rx_gain_off, defdblval:0, TYPE_DOUBLE, 0}, \
{"ue-txgain", CONFIG_HLP_UETXG, 0, dblptr:&(tx_gain[0][0]), defdblval:0, TYPE_DOUBLE, 0}, \
{"ue-nb-ant-rx", CONFIG_HLP_UENANTR, 0, u8ptr:&nb_antenna_rx, defuintval:1, TYPE_UINT8, 0}, \
{"ue-nb-ant-tx", CONFIG_HLP_UENANTT, 0, u8ptr:&nb_antenna_tx, defuintval:1, TYPE_UINT8, 0}, \
{"ue-scan-carrier", CONFIG_HLP_UESCAN, PARAMFLAG_BOOL, iptr:&UE_scan_carrier, defintval:0, TYPE_INT, 0}, \
{"ue-max-power", NULL, 0, iptr:&(tx_max_power[0]), defintval:23, TYPE_INT, 0}, \
{"emul-iface", CONFIG_HLP_EMULIFACE, 0, strptr:&emul_iface, defstrval:"lo", TYPE_STRING, 100}, \
{"L2-emul", NULL, 0, u8ptr:&nfapi_mode, defuintval:3, TYPE_UINT8, 0}, \
{"num-ues", NULL, 0, u16ptr:&(NB_UE_INST), defuintval:1, TYPE_UINT16, 0}, \
{"nums_ue_thread", NULL, 0, u16ptr:&(NB_THREAD_INST), defuintval:1, TYPE_UINT16, 0}, \
{"r" , CONFIG_HLP_PRB, 0, u8ptr:&(frame_parms[0]->N_RB_DL), defintval:25, TYPE_UINT8, 0}, \
{"dlsch-demod-shift", CONFIG_HLP_DLSHIFT, 0, iptr:(int32_t *)&dlsch_demod_shift, defintval:0, TYPE_INT, 0}, \
{"usrp-args", CONFIG_HLP_USRP_ARGS, 0, strptr:(char **)&usrp_args, defstrval:"type=b200",TYPE_STRING, 0}, \
{"mmapped-dma", CONFIG_HLP_DMAMAP, PARAMFLAG_BOOL, uptr:&mmapped_dma, defintval:0, TYPE_INT, 0}, \
{"T" , CONFIG_HLP_TDD, PARAMFLAG_BOOL, iptr:&tddflag, defintval:0, TYPE_INT, 0}, \
{"A", CONFIG_HLP_TADV, 0, iptr:&(timingadv), defintval:0, TYPE_INT, 0} \
}
/*-----------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters specific to UE threads */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*-----------------------------------------------------------------------------------------------------------------------------*/
#define CMDLINE_UETHREADSPARAMS_DESC { \
{"threadOneSubframe", NULL, 0, iptr:&(threads.one), defintval:1, TYPE_INT, 0}, \
{"threadTwoSubframe", NULL, 0, iptr:&(threads.two), defintval:1, TYPE_INT, 0}, \
{"threadThreeSubframe", NULL, 0, iptr:&(threads.three), defintval:1, TYPE_INT, 0}, \
{"threadSlot1ProcOne", NULL, 0, iptr:&(threads.slot1_proc_one), defintval:1, TYPE_INT, 0}, \
{"threadSlot1ProcTwo", NULL, 0, iptr:&(threads.slot1_proc_two), defintval:1, TYPE_INT, 0}, \
}
// {"threadIQ", NULL, 0, iptr:&(threads.iq), defintval:1, TYPE_INT, 0},
#define DEFAULT_DLF 2680000000
uint64_t get_pdcp_optmask(void);
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern uint64_t downlink_frequency[MAX_NUM_CCs][4];
extern int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
extern int rx_input_level_dBm;
extern uint64_t num_missed_slots; // counter for the number of missed slots
extern int oaisim_flag;
extern volatile int oai_exit;
extern openair0_config_t openair0_cfg[MAX_CARDS];
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern int transmission_mode;
extern double cpuf;
// In lte-enb.c
extern void stop_eNB(int);
extern void kill_eNB_proc(int inst);
extern void init_eNB(int single_thread_flag, int wait_for_sync);
// In lte-ru.c
extern void stop_ru(RU_t *ru);
extern void init_ru_vnf(void);
extern void init_RU_proc(RU_t *ru);
extern void stop_RU(int nb_ru);
extern void kill_RU_proc(RU_t *ru);
extern void set_function_spec_param(RU_t *ru);
extern void init_RU(char *, int send_dmrssync);
// In lte-ue.c
extern int setup_ue_buffers(PHY_VARS_UE **phy_vars_ue, openair0_config_t *openair0_cfg);
extern void fill_ue_band_info(void);
extern void init_UE(int nb_inst,
int eMBMS_active,
int uecap_xer_in,
int timing_correction,
int phy_test,
int UE_scan,
int UE_scan_carrier,
runmode_t mode,
int rxgain,
int txpowermax,
LTE_DL_FRAME_PARMS *fp);
extern void init_thread(int sched_runtime, int sched_deadline, int sched_fifo, cpu_set_t *cpuset, char *name);
extern void reset_opp_meas(void);
extern void print_opp_meas(void);
extern void init_td_thread(PHY_VARS_eNB *);
extern void init_te_thread(PHY_VARS_eNB *);
extern void kill_td_thread(PHY_VARS_eNB *);
extern void kill_te_thread(PHY_VARS_eNB *);
extern void RCConfig_sim(void);
extern void init_ocm(void);
extern void init_ue_devices(PHY_VARS_UE *);
PHY_VARS_UE *init_ue_vars(LTE_DL_FRAME_PARMS *frame_parms, uint8_t UE_id, uint8_t abstraction_flag);
void init_eNB_afterRU(void);
extern int stop_L1L2(module_id_t enb_id);
extern int restart_L1L2(module_id_t enb_id);
extern void init_UE_stub_single_thread(int nb_inst, int eMBMS_active, int uecap_xer_in, char *emul_iface);
extern PHY_VARS_UE *init_ue_vars(LTE_DL_FRAME_PARMS *frame_parms, uint8_t UE_id, uint8_t abstraction_flag);
#endif