Merge remote-tracking branch 'origin/fix-clock-source' into integration-develop-nr-2019w51

executables/nr-ru.c

@@ -2272,6 +2272,9 @@ void RCconfig_RU(void)
           LOG_E(PHY, "Erroneous RU clock source in the provided configuration file: '%s'\n", *(RUParamList.paramarray[j][RU_SDR_CLK_SRC].strptr));
         }
       }
+      else {
+	RC.ru[j]->openair0_cfg.clock_source = unset;
+      }
 
       if (strcmp(*(RUParamList.paramarray[j][RU_LOCAL_RF_IDX].strptr), "yes") == 0) {
         if ( !(config_isparamset(RUParamList.paramarray[j],RU_LOCAL_IF_NAME_IDX)) ) {

executables/nr-softmodem.c

@@ -106,7 +106,6 @@ int config_sync_var=-1;
 #endif
 volatile int             oai_exit = 0;
 
-static clock_source_t clock_source = internal;
 static int wait_for_sync = 0;
 
 unsigned int mmapped_dma=0;

executables/nr-softmodem.h

@@ -23,7 +23,6 @@
     {"phy-test",              CONFIG_HLP_PHYTST,      PARAMFLAG_BOOL,   iptr:&phy_test,                     defintval:0,                   TYPE_INT,    0},        \
     {"usim-test",             CONFIG_HLP_USIM,        PARAMFLAG_BOOL,   u8ptr:&usim_test,                   defintval:0,                   TYPE_UINT8,  0},        \
     {"mmapped-dma",           CONFIG_HLP_DMAMAP,      PARAMFLAG_BOOL,   uptr:&mmapped_dma,                  defintval:0,                   TYPE_INT,    0},        \
-    {"external-clock",        CONFIG_HLP_EXCCLK,      PARAMFLAG_BOOL,   uptr:&clock_source,                 defintval:0,                   TYPE_INT,    0},        \
     {"wait-for-sync",         NULL,                   PARAMFLAG_BOOL,   iptr:&wait_for_sync,                defintval:0,                   TYPE_INT,    0},        \
     {"single-thread-disable", CONFIG_HLP_NOSNGLT,     PARAMFLAG_BOOL,   iptr:&single_thread_flag,           defintval:1,                   TYPE_INT,    0},        \
     {"A" ,                    CONFIG_HLP_TADV,        0,                uptr:&timing_advance,               defintval:0,                   TYPE_UINT,   0},        \

executables/nr-uesoftmodem.c

@@ -116,7 +116,7 @@ volatile int             start_eNB = 0;
 volatile int             start_UE = 0;
 volatile int             oai_exit = 0;
 
-static clock_source_t    clock_source = internal;
+static clock_source_t    clock_source = unset;
 int                      single_thread_flag=1;
 static double            snr_dB=20;
 

executables/nr-uesoftmodem.h

@@ -65,7 +65,7 @@
   {"ulsch-max-errors",      CONFIG_HLP_ULMAXE,      0,              uptr:&ULSCH_max_consecutive_errors,    defuintval:0,          TYPE_UINT,   0}, \
   {"phy-test",              CONFIG_HLP_PHYTST,      PARAMFLAG_BOOL, iptr:&phy_test,                        defintval:0,           TYPE_INT,    0}, \
   {"usim-test",             CONFIG_HLP_USIM,        PARAMFLAG_BOOL, u8ptr:&usim_test,                      defintval:0,           TYPE_UINT8,  0}, \
-  {"external-clock",        CONFIG_HLP_EXCCLK,      PARAMFLAG_BOOL, uptr:&clock_source,                    defintval:0,           TYPE_INT,    0}, \
+  {"clock-source",          CONFIG_HLP_EXCCLK,      0,              iptr:&clock_source,                    defintval:0,           TYPE_INT,    0}, \
   {"single-thread-disable", CONFIG_HLP_NOSNGLT,     PARAMFLAG_BOOL, iptr:&single_thread_flag,              defintval:1,           TYPE_INT,    0}, \
   {"nr-dlsch-demod-shift",  CONFIG_HLP_DLSHIFT,     0,              iptr:(int32_t *)&nr_dlsch_demod_shift, defintval:0,           TYPE_INT,    0}, \
   {"A" ,                    CONFIG_HLP_TADV,        0,              uptr:&timing_advance,                  defintval:0,           TYPE_UINT,   0}, \

targets/ARCH/COMMON/common_lib.h

@@ -135,6 +135,8 @@ typedef struct {
 
 /*! \brief Clock source types */
 typedef enum {
+  //! this means the paramter has not been set
+  unset=-1,
   //! This tells the underlying hardware to use the internal reference
   internal=0,
   //! This tells the underlying hardware to use the external reference

targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp

@@ -279,8 +279,11 @@ static int trx_usrp_start(openair0_device *device) {
   s->usrp->set_gpio_attr("FP0", "DDR", 0x7f, 0x7f);
   //set control register to ATR
   s->usrp->set_gpio_attr("FP0", "CTRL", 0x7f,0x7f);
-  //set ATR register
+  //set pins 4 (RX_TX_Switch) and 6 (Shutdown PA) to 1 when the radio is only receiving (ATR_RX)
   s->usrp->set_gpio_attr("FP0", "ATR_RX", (1<<4)|(1<<6), 0x7f);
+  // set pin 5 (Shutdown LNA) to 1 when the radio is transmitting and receiveing (ATR_XX)
+  // (we use full duplex here, because our RX is on all the time - this might need to change later)
+  s->usrp->set_gpio_attr("FP0", "ATR_XX", (1<<5), 0x7f);
   // init recv and send streaming
   uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
   LOG_I(HW,"Time in secs now: %llu \n", s->usrp->get_time_now().to_ticks(s->sample_rate));
@@ -1007,23 +1010,32 @@ extern "C" {
       s->usrp = uhd::usrp::multi_usrp::make(args);
 
       if (args.find("clock_source")==std::string::npos) {
-        LOG_I(HW, "Using clock_source == '%d'\n", openair0_cfg[0].clock_source);
-
 	if (openair0_cfg[0].clock_source == internal) {
 	  //in UHD 3.14 we could use
 	  //s->usrp->set_sync_source("clock_source=internal","time_source=internal");
 	  s->usrp->set_time_source("internal");
 	  s->usrp->set_clock_source("internal");
-        } else if (openair0_cfg[0].clock_source == external ) {
+	  LOG_D(HW,"Setting time and clock source to internal\n");
+	}
+	else if (openair0_cfg[0].clock_source == external ) {
 	  //s->usrp->set_sync_source("clock_source=external","time_source=external");
 	  s->usrp->set_time_source("external");
 	  s->usrp->set_clock_source("external");
-        } else if (openair0_cfg[0].clock_source==gpsdo) {
+	  LOG_D(HW,"Setting time and clock source to external\n");
+	}
+	else if (openair0_cfg[0].clock_source==gpsdo) {
 	  s->usrp->set_clock_source("gpsdo");
 	  s->usrp->set_time_source("gpsdo");
+	  LOG_D(HW,"Setting time and clock source to gpsdo\n");
+	}
+	else { 
+	  LOG_W(HW,"Clock source set neither in usrp_args nor on command line, using default!\n");
+	}
+      }
+      else {
+	if (openair0_cfg[0].clock_source != unset) {
+	  LOG_W(HW,"Clock source set in both usrp_args and in clock_source, ingnoring the latter!\n");
 	}
-      } else {
-        LOG_W(HW, "clock_source already specified in device arguments! Ignoring command line parameter\n");
       }
       
       if (s->usrp->get_clock_source(0) == "gpsdo") {

targets/RT/USER/lte-softmodem.h

@@ -146,7 +146,7 @@
     {"dlsch-demod-shift", CONFIG_HLP_DLSHIFT,     0,               iptr:(int32_t *)&dlsch_demod_shift, defintval:0,          TYPE_INT,      0},   \
     {"usrp-args",         CONFIG_HLP_USRP_ARGS,   0,               strptr:(char **)&usrp_args,         defstrval:"type=b200",TYPE_STRING,   0},   \
     {"mmapped-dma",       CONFIG_HLP_DMAMAP,      PARAMFLAG_BOOL,  uptr:&mmapped_dma,                  defintval:0,          TYPE_INT,      0},   \
-    {"clock",             CONFIG_HLP_CLK,         0,               uptr:&clock_source,                 defintval:0,          TYPE_UINT,     0},   \
+    {"clock-source",      CONFIG_HLP_CLK,         0,               iptr:&clock_source,                 defintval:0,          TYPE_INT,      0},   \
     {"T" ,                CONFIG_HLP_TDD,         PARAMFLAG_BOOL,  iptr:&tddflag,                      defintval:0,          TYPE_INT,      0},   \
     {"A",                 CONFIG_HLP_TADV,        0,               iptr:&(timingadv),                  defintval:0,          TYPE_INT,      0}    \
   }