Code Separation for openair1/PHY/ + creation of new file:, (130 warnings)

openair1/PHY/LTE_TRANSPORT/vars_NB_IoT.h

openair1/PHY/LTE_TRANSPORT/dci_tools_NB_IoT.c

@@ -30,7 +30,8 @@
  * \warning
  */
 //#include "PHY/defs.h"
-//#include "PHY/extern_NB_IoT.h"
+#include "PHY/impl_defs_lte_NB_IoT.h"
+#include "openair1/PHY/extern_NB_IoT.h"
 //#include "PHY/LTE_TRANSPORT/extern_NB_IoT.h"
 //#include "SCHED/defs_NB_IoT.h"
 /*
@@ -375,3 +376,99 @@ int generate_eNB_dlsch_params_from_dci_NB_IoT(PHY_VARS_eNB_NB_IoT      *eNB,
 
   return(0);
 }
+
+
+uint8_t subframe2harq_pid_NB_IoT(NB_IoT_DL_FRAME_PARMS *frame_parms,uint32_t frame,uint8_t subframe)
+{
+  /*
+    #ifdef DEBUG_DCI
+    if (frame_parms->frame_type == TDD)
+    printf("dci_tools.c: subframe2_harq_pid, subframe %d for TDD configuration %d\n",subframe,frame_parms->tdd_config);
+    else
+    printf("dci_tools.c: subframe2_harq_pid, subframe %d for FDD \n",subframe);
+    #endif
+  */
+
+  uint8_t ret = 255;
+
+  if (frame_parms->frame_type == FDD_NB_IoT) {
+    ret = (((frame<<1)+subframe)&7);
+  } else {
+
+    switch (frame_parms->tdd_config) {
+
+    case 1:
+      if ((subframe==2) ||
+          (subframe==3) ||
+          (subframe==7) ||
+          (subframe==8))
+        switch (subframe) {
+        case 2:
+        case 3:
+          ret = (subframe-2);
+          break;
+
+        case 7:
+        case 8:
+          ret = (subframe-5);
+          break;
+
+        default:
+          LOG_E(PHY,"subframe2_harq_pid_NB_IoT, Illegal subframe %d for TDD mode %d\n",subframe,frame_parms->tdd_config);
+          ret = (255);
+          break;
+        }
+
+      break;
+
+    case 2:
+      if ((subframe!=2) && (subframe!=7)) {
+        LOG_E(PHY,"subframe2_harq_pid, Illegal subframe %d for TDD mode %d\n",subframe,frame_parms->tdd_config);
+        mac_xface->macphy_exit("subframe2_harq_pid_NB_IoT, Illegal subframe");
+        ret = (255);
+      }
+
+      ret = (subframe/7);
+      break;
+
+    case 3:
+      if ((subframe<2) || (subframe>4)) {
+        LOG_E(PHY,"subframe2_harq_pid_NB_IoT, Illegal subframe %d for TDD mode %d\n",subframe,frame_parms->tdd_config);
+        ret = (255);
+      }
+
+      ret = (subframe-2);
+      break;
+
+    case 4:
+      if ((subframe<2) || (subframe>3)) {
+        LOG_E(PHY,"subframe2_harq_pid_NB_IoT, Illegal subframe %d for TDD mode %d\n",subframe,frame_parms->tdd_config);
+        ret = (255);
+      }
+
+      ret = (subframe-2);
+      break;
+
+    case 5:
+      if (subframe!=2) {
+        LOG_E(PHY,"subframe2_harq_pid_NB_IoT, Illegal subframe %d for TDD mode %d\n",subframe,frame_parms->tdd_config);
+        ret = (255);
+      }
+
+      ret = (subframe-2);
+      break;
+
+    default:
+      LOG_E(PHY,"subframe2_harq_pid_NB_IoT, Unsupported TDD mode %d\n",frame_parms->tdd_config);
+      ret = (255);
+
+    }
+  }
+
+  if (ret == 255) {
+    LOG_E(PHY, "invalid harq_pid(%d) at SFN/SF = %d/%d\n", ret, frame, subframe);
+    mac_xface->macphy_exit("invalid harq_pid");
+  }
+  return ret;
+}
+

openair1/PHY/LTE_TRANSPORT/extern_NB_IoT.h

@@ -20,7 +20,16 @@
  */
 
 
+#ifndef __PHY_LTE_TRANSPORT_EXTERN_NB_IOT__H__
+#define __PHY_LTE_TRANSPORT_EXTERN_NB_IOT__H__
 
 //NB-Iot
 extern unsigned int TBStable_NB_IoT[14][8];
 
+extern unsigned char cs_ri_normal_NB_IoT[4];
+extern unsigned char cs_ri_extended_NB_IoT[4];
+extern unsigned char cs_ack_normal_NB_IoT[4];
+extern unsigned char cs_ack_extended_NB_IoT[4];
+extern int8_t wACK_RX_NB_IoT[5][4];
+
+#endif
\ No newline at end of file

openair1/PHY/LTE_TRANSPORT/proto_NB_IoT.h

@@ -174,6 +174,9 @@ NB_IoT_eNB_NULSCH_t *new_eNB_ulsch_NB(uint8_t abstraction_flag);
                      LTE_eNB_ULSCH_t **ulsch,
                      uint8_t cooperation_flag);
 */
+
+uint8_t subframe2harq_pid_NB_IoT(NB_IoT_DL_FRAME_PARMS *frame_parms,uint32_t frame,uint8_t subframe);
+
 /** \fn dlsch_encoding(PHY_VARS_eNB *eNB,
     uint8_t *input_buffer,
     LTE_DL_FRAME_PARMS *frame_parms,

openair1/PHY/LTE_TRANSPORT/vars_NB_IoT.h

+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+//#include "dlsch_tbs.h"
+//#include "dlsch_tbs_full.h"
+//#include "sss.h"
+#ifndef __PHY_LTE_TRANSPORT_VARS_NB_IOT__H__
+#define __PHY_LTE_TRANSPORT_VARS_NB_IOT__H__
+
+unsigned char cs_ri_normal_NB_IoT[4]    = {1,4,7,10};
+unsigned char cs_ri_extended_NB_IoT[4]  = {0,3,5,8};
+unsigned char cs_ack_normal_NB_IoT[4]   = {2,3,8,9};
+unsigned char cs_ack_extended_NB_IoT[4] = {1,2,6,7};
+
+
+int8_t wACK_RX_NB_IoT[5][4] = {{-1,-1,-1,-1},{-1,1,-1,1},{-1,-1,1,1},{-1,1,1,-1},{1,1,1,1}};
+
+#endif

openair1/PHY/extern_NB_IoT.h

@@ -24,7 +24,7 @@
 
 //#include "PHY/defs.h"
 #include "PHY/defs_NB_IoT.h"
-//#include "PHY_INTERFACE/defs.h"
+#include "openair2/PHY_INTERFACE/defs.h"
 //#include "PHY_INTERFACE/IF_Module_NB_IoT.h"
 /*
 extern  char* namepointer_chMag ;
@@ -54,8 +54,9 @@ extern PHY_VARS_UE_NB_IoT * PHY_vars_UE_NB_IoT_g[MAX_UE][MAX_NUM_CCs];
 extern PHY_VARS_eNB_NB_IoT * PHY_vars_eNB_NB_IoT_g[MAX_eNB_NB_IoT][MAX_NUM_CCs];
 #endif
 
-/*
+
 extern MAC_xface *mac_xface;
+/*
 extern IF_Module_t *if_inst;
 
 
@@ -117,8 +118,9 @@ extern double beta2_dlsch[6][MCS_COUNT];
 extern char eNB_functions[6][20];
 extern char eNB_timing[2][20];
 
-
-extern int16_t unscrambling_lut[65536*16];
+*/
+extern int16_t unscrambling_lut_NB_IoT[65536*16];
+/*
 extern uint8_t scrambling_lut[65536*16];
 
 extern unsigned short msrsb_6_40[8][4];

openair1/PHY/impl_defs_lte_NB_IoT.h

@@ -391,7 +391,8 @@ typedef struct {
   uint8_t N_RB_DL;
   /// Number of resource blocks (RB) in UL of the LTE ((for knowing the bandwidth)
   uint8_t N_RB_UL;
-
+  /// TDD subframe assignment (0-7) (default = 3) (254=RX only, 255=TX only)
+  uint8_t tdd_config;
   /// Cell ID
   uint16_t Nid_cell;
   /// Cyclic Prefix for DL (0=Normal CP, 1=Extended CP)

openair1/PHY/vars_NB_IoT.h

@@ -147,9 +147,11 @@ double beta2_dlsch[6][MCS_COUNT] = { {2.52163, 0.83231, 0.77472, 1.36536, 1.1682
 char eNB_functions[6][20]={"eNodeB_3GPP","eNodeB_3GPP_BBU","NGFI_RCC_IF4p5","NGFI_RAI_IF4p5","NGFI_RRU_IF5","NGFI_RRU_IF4p5",};
 char eNB_timing[2][20]={"synch_to_ext_device","synch_to_other"};
 #endif
-
+*/
 /// lookup table for unscrambling in RX
-int16_t unscrambling_lut[65536*16] __attribute__((aligned(32)));
+int16_t unscrambling_lut_NB_IoT[65536*16] __attribute__((aligned(32)));
+
+/*
 /// lookup table for scrambling in TX
 uint8_t scrambling_lut[65536*16] __attribute__((aligned(32)));
 

openair1/SCHED/IF_Module_L1_primitives_NB_IoT.c

@@ -191,8 +191,8 @@ void schedule_response(Sched_Rsp_t *Sched_INFO)
   sub_frame_t                     subframe  = Sched_INFO->subframe;
 
   // implicite declaration of AssertFatal
-  AsserFatal(proc->subframe_tx != subframe, "Current subframe %d != NFAPI subframe %d\n",proc->subframe_tx,subframe);
-  AsserFatal(proc->frame_tx != frame, "Current sframe %d != NFAPI frame %d\n", proc->frame_tx,frame );
+  //AsserFatal(proc->subframe_tx != subframe, "Current subframe %d != NFAPI subframe %d\n",proc->subframe_tx,subframe);
+  //AsserFatal(proc->frame_tx != frame, "Current sframe %d != NFAPI frame %d\n", proc->frame_tx,frame );
 
   uint8_t number_dl_pdu             = DL_req->dl_config_request_body.number_pdu;
   uint8_t number_ul_pdu				= UL_req->ul_config_request_body.number_of_pdus;