Skip to content

O
OpenXG-RAN
Commit 2d73a4a3 authored by Florian Kaltenberger's avatar Florian Kaltenberger
Browse files
Options

added functionality to map UEs and eNBs to different cards and RF chains 

moved some functionality from device_init to dump_config in openair0 library


git-svn-id: http://svn.eurecom.fr/openair4G/trunk@5744 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 111c43ac
Show whitespace changes
Inline Side-by-side
Showing with 331 additions and 241 deletions
targets/ARCH/COMMON/common_lib.h
View file @ 2d73a4a3
......@@ -40,6 +40,10 @@ typedef struct openair0_device_t openair0_device;
/* structrue holds the parameters to configure USRP devices
*/
#ifdef USRP
#define MAX_CARDS 1
#endif
typedef enum {
max_gain=0,med_gain,byp_gain
} rx_gain_t;
......@@ -68,6 +72,15 @@ typedef struct {
double tx_bw;
} openair0_config_t;
typedef struct {
/* card id */
int card;
/* rf chain id */
int chain;
} openair0_rf_map;
struct openair0_device_t {
/* USRP RF frontend parameters set by application */
openair0_config_t openair0_cfg;
......
targets/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.c
View file @ 2d73a4a3
......@@ -80,7 +80,6 @@ int openair0_open(void)
int card;
int ant;
int openair0_num_antennas[4];
PAGE_SHIFT = log2_int( sysconf( _SC_PAGESIZE ) );
......@@ -220,10 +219,12 @@ int openair0_close(void)
return 0;
}
/*
int openair0_dump_config(int card)
{
return ioctl(openair0_fd, openair_DUMP_CONFIG, card);
}
*/
int openair0_get_frame(int card)
{
......@@ -245,18 +246,15 @@ int openair0_stop_without_reset(int card)
return ioctl(openair0_fd, openair_STOP_WITHOUT_RESET, card);
}
static exmimo_config_t *p_exmimo_config;
static exmimo_id_t *p_exmimo_id;
#define MY_RF_MODE (RXEN + TXEN + TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM + DMAMODE_RX + DMAMODE_TX)
#define RF_MODE_BASE (LNA1ON +LNAMax + RFBBNORM)
int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
// Initialize card
exmimo_config_t *p_exmimo_config;
exmimo_id_t *p_exmimo_id;
int ret;
int ant;
int resampling_factor=2;
int rx_filter=RXLPF25, tx_filter=TXLPF25;
ret = openair0_open();
......@@ -271,7 +269,12 @@ int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cf
return(ret);
}
if (openair0_num_detected_cards>MAX_CARDS) {
printf ("Detected %d number of cards, but MAX_CARDS=%d\n", openair0_num_detected_cards, MAX_CARDS);
}
else {
printf ("Detected %d number of cards, %d number of antennas.\n", openair0_num_detected_cards, openair0_num_antennas[0]);
}
p_exmimo_config = openair0_exmimo_pci[0].exmimo_config_ptr;
p_exmimo_id = openair0_exmimo_pci[0].exmimo_id_ptr;
......@@ -281,32 +284,50 @@ int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cf
// check if the software matches firmware
if (p_exmimo_id->board_swrev!=BOARD_SWREV_CNTL2) {
printf("Software revision %d and firmware revision %d do not match. Please update either the firmware or the software!\n",BOARD_SWREV_CNTL2,p_exmimo_id->board_swrev);
exit(-1);
return(-1);
}
return(0);
}
int openair0_dump_config(openair0_config_t *openair0_cfg, int UE_flag)
{
int ret;
int ant, card;
int resampling_factor=2;
int rx_filter=RXLPF25, tx_filter=TXLPF25;
exmimo_config_t *p_exmimo_config;
exmimo_id_t *p_exmimo_id;
if (!openair0_cfg) {
printf("Error, openair0_cfg is null!!\n");
return(-1);
}
for (card=0; card<openair0_num_detected_cards; card++) {
p_exmimo_config = openair0_exmimo_pci[card].exmimo_config_ptr;
p_exmimo_id = openair0_exmimo_pci[card].exmimo_id_ptr;
if (p_exmimo_id->board_swrev>=9)
p_exmimo_config->framing.eNB_flag = 0;
else
p_exmimo_config->framing.eNB_flag = 1;//!UE_flag;
p_exmimo_config->framing.eNB_flag = !UE_flag;
p_exmimo_config->framing.tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_LSB;
if (openair0_cfg->sample_rate==30.72e6) {
if (openair0_cfg[card].sample_rate==30.72e6) {
resampling_factor = 0;
rx_filter = RXLPF10;
tx_filter = TXLPF10;
}
else if (openair0_cfg->sample_rate==15.36e6) {
else if (openair0_cfg[card].sample_rate==15.36e6) {
resampling_factor = 1;
rx_filter = RXLPF5;
tx_filter = TXLPF5;
}
else if (openair0_cfg->sample_rate==7.68e6) {
else if (openair0_cfg[card].sample_rate==7.68e6) {
resampling_factor = 2;
rx_filter = RXLPF25;
tx_filter = TXLPF25;
......@@ -326,45 +347,42 @@ int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cf
p_exmimo_config->framing.resampling_factor = resampling_factor;
#endif
for (ant=0;ant<max(openair0_cfg->tx_num_channels,openair0_cfg->rx_num_channels);ant++)
for (ant=0;ant<4;ant++) {
if (openair0_cfg[card].rx_freq[ant] || openair0_cfg[card].tx_freq[ant]) {
p_exmimo_config->rf.rf_mode[ant] = RF_MODE_BASE;
for (ant=0;ant<openair0_cfg->tx_num_channels;ant++)
p_exmimo_config->rf.do_autocal[ant] = 1;
}
if (openair0_cfg[card].tx_freq[ant]) {
p_exmimo_config->rf.rf_mode[ant] += (TXEN + DMAMODE_TX + TXLPFNORM + TXLPFEN + tx_filter);
for (ant=0;ant<openair0_cfg->rx_num_channels;ant++) {
p_exmimo_config->rf.rf_freq_tx[ant] = (unsigned int)openair0_cfg[card].tx_freq[ant];
p_exmimo_config->rf.tx_gain[ant][0] = (unsigned int)openair0_cfg[card].tx_gain[ant];
printf("openair0 : programming TX antenna %d (freq %u, gain %d)\n",ant,p_exmimo_config->rf.rf_freq_tx[ant],p_exmimo_config->rf.tx_gain[ant][0]);
}
if (openair0_cfg[card].rx_freq[ant]) {
p_exmimo_config->rf.rf_mode[ant] += (RXEN + DMAMODE_RX + RXLPFNORM + RXLPFEN + rx_filter);
switch (openair0_cfg->rxg_mode[ant]) {
p_exmimo_config->rf.rf_freq_rx[ant] = (unsigned int)openair0_cfg[card].rx_freq[ant];
p_exmimo_config->rf.rx_gain[ant][0] = (unsigned int)openair0_cfg[card].rx_gain[ant];
printf("openair0 : programming RX antenna %d (freq %u, gain %d)\n",ant,p_exmimo_config->rf.rf_freq_rx[ant],p_exmimo_config->rf.rx_gain[ant][0]);
switch (openair0_cfg[card].rxg_mode[ant]) {
default:
case max_gain:
p_exmimo_config->rf.rf_mode[ant] = (p_exmimo_config->rf.rf_mode[ant]&(~LNAGAINMASK))|LNAMax;
p_exmimo_config[card].rf.rf_mode[ant] = (p_exmimo_config->rf.rf_mode[ant]&(~LNAGAINMASK))|LNAMax;
break;
case med_gain:
p_exmimo_config->rf.rf_mode[ant] = (p_exmimo_config->rf.rf_mode[ant]&(~LNAGAINMASK))|LNAMed;
p_exmimo_config[card].rf.rf_mode[ant] = (p_exmimo_config->rf.rf_mode[ant]&(~LNAGAINMASK))|LNAMed;
break;
case byp_gain:
p_exmimo_config->rf.rf_mode[ant] = (p_exmimo_config->rf.rf_mode[ant]&(~LNAGAINMASK))|LNAByp;
p_exmimo_config[card].rf.rf_mode[ant] = (p_exmimo_config->rf.rf_mode[ant]&(~LNAGAINMASK))|LNAByp;
break;
}
}
for (ant=max(openair0_cfg->tx_num_channels,openair0_cfg->rx_num_channels);ant<4;ant++) {
else {
p_exmimo_config->rf.rf_mode[ant] = 0;
p_exmimo_config->rf.do_autocal[ant] = 0;
}
for (ant = 0; ant<openair0_cfg->rx_num_channels; ant++) {
p_exmimo_config->rf.do_autocal[ant] = 1;
p_exmimo_config->rf.rf_freq_rx[ant] = (unsigned int)openair0_cfg->rx_freq[ant];
p_exmimo_config->rf.rx_gain[ant][0] = (unsigned int)openair0_cfg->rx_gain[ant];
printf("openair0 : programming RX antenna %d (freq %d, gain %d)\n",ant,p_exmimo_config->rf.rf_freq_rx[ant],p_exmimo_config->rf.rx_gain[ant][0]);
}
for (ant = 0; ant<openair0_cfg->tx_num_channels; ant++) {
p_exmimo_config->rf.rf_freq_tx[ant] = (unsigned int)openair0_cfg->tx_freq[ant];
p_exmimo_config->rf.tx_gain[ant][0] = (unsigned int)openair0_cfg->tx_gain[ant];
printf("openair0 : programming TX antenna %d (freq %d, gain %d)\n",ant,p_exmimo_config->rf.rf_freq_tx[ant],p_exmimo_config->rf.tx_gain[ant][0]);
}
p_exmimo_config->rf.rf_local[ant] = rf_local[ant];
p_exmimo_config->rf.rf_rxdc[ant] = rf_rxdc[ant];
for (ant=0;ant<4;ant++) {
p_exmimo_config->rf.rf_local[ant] = rf_local[ant];
p_exmimo_config->rf.rf_rxdc[ant] = rf_rxdc[ant];
......@@ -382,6 +400,12 @@ int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cf
}
}
ret = ioctl(openair0_fd, openair_DUMP_CONFIG, card);
if (ret!=0)
return(-1);
}
return(0);
}
......
targets/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.h
View file @ 2d73a4a3
......@@ -63,7 +63,8 @@ int openair0_close(void);
// trigger config update on card
// return 0 on success
int openair0_dump_config(int card);
int openair0_dump_config(openair0_config_t *openair0_cfg, int UE_flag);
//int openair0_dump_config(int card);
// triggers recording of exactly 1 frame
// in case of synchronized multiple cards, send this only to the master card
......
targets/RT/USER/.runinfo
View file @ 2d73a4a3
......@@ -6,16 +6,13 @@ msg_many:lxrt+sem+mbx+msg+fifos:!sudo ./msg_test;sleep 1;popall:control_c
eNB:lxrt+sem+mbx+msg+fifos:!sudo ./synctest;sleep 1;popall:control_c
eNB_test:lxrt+sem+mbx+msg+smi:!sudo ./lte-softmodem -S -F enb2tx;sleep 1;popall:control_c
UE:lxrt+sem+mbx+msg+fifos:!sudo ./synctest -U -d -T 108;sleep 1;popall:control_c
#UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907602944 -V;sleep 1;popall:control_c
#EXMIMO2 card 1
#UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600480 -V;sleep 1;popall:control_c
UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600480 -V -K /tmp/itti_UE0.log;sleep 1;popall:control_c
#EXMIMO2 card 5
#UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907597240 -V;sleep 1;popall:control_c
#UE0_smbv:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907598252 -V;sleep 1;popall:control_c
#EXMIMO2 card 24
#UE0_smbv:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907595776 -V;sleep 1;popall:control_c
#EXMIMO2 card 5?
UE0_smbv:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907598252 -V;sleep 1;popall:control_c
#EXMIMO2 card 38
UE0_smbv:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907592704 -V;sleep 1;popall:control_c
UE850:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 859498000 -F ex2_850;sleep 1;popall:control_c
eNB850:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -d -C 859500000 -F ex2_850;sleep 1;popall:control_c
UE0noL2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600480 --no-L2-connect;sleep 1;popall:control_c
......@@ -31,9 +28,9 @@ UE2prach:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue2
UE2noL2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue2 --no-L2-connect;sleep 1;popall:control_c
#eNB0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 1907600000 -d -V;sleep 1;popall:control_c
#eNB0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 1907598252 -d -V;sleep 1;popall:control_c
eNB0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -d -O../../PROJECTS/GENERIC-LTE-EPC/CONF/enb.sfr.sud.conf -V -K /tmp/itti_eNB0.log;sleep 1;popall:control_c
eNB1:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 1907600000 -F ex2_2 -d;sleep 1;popall:control_c
eNB2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 1907600000 -F ue2 -d;sleep 1;popall:control_c
eNB0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -d -O../../PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.conf -V -K /tmp/itti_eNB0.log;sleep 1;popall:control_c
eNB1:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 2680000000 -r 50 -d -V;sleep 1;popall:control_c
eNB2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 2680000000 -r 100 -d -V;sleep 1;popall:control_c
dot11:lxrt+sem+mbx+msg+fifos:!sudo ./dot11 -C 1907600000 -d;sleep 1;popall:control_c
dot11_tx_test: lxrt+sem+mbx+msg+fifos:!sudo ./dot11 -C 1907600000 -d -t;sleep 1;popall:control_c
eNB2_750:lxrt+sem+mbx+msg+fifos:!sudo ./synctest_eNB -C 746000000 -F enb1tx_750 -d;sleep 1;popall:control_c
......
targets/RT/USER/Makefile
View file @ 2d73a4a3
......@@ -132,7 +132,8 @@ OBJ += $(OPENAIR1_DIR)/SIMULATION/ETH_TRANSPORT/netlink_init.o
CFLAGS += -DOPENAIR2 -DNO_RRM -DPUCCH -DMAC_CONTEXT=1
endif
RTAI_OBJ += $(UTILS_OBJS)
#RTAI_
OBJ += $(UTILS_OBJS)
......
targets/RT/USER/lte-softmodem.c
View file @ 2d73a4a3
......@@ -146,11 +146,12 @@ void cleanup_dlsch_threads(void);
int32_t init_rx_pdsch_thread(void);
void cleanup_rx_pdsch_thread(void);
openair0_config_t openair0_cfg[MAX_CARDS];
int32_t *rxdata;
int32_t *txdata;
void setup_ue_buffers(PHY_VARS_UE *phy_vars_ue, LTE_DL_FRAME_PARMS *frame_parms, int carrier);
void setup_eNB_buffers(PHY_VARS_eNB *phy_vars_eNB, LTE_DL_FRAME_PARMS *frame_parms, int carrier);
int setup_ue_buffers(PHY_VARS_UE **phy_vars_ue, openair0_config_t *openair0_cfg, openair0_rf_map rf_map[MAX_NUM_CCs]);
int setup_eNB_buffers(PHY_VARS_eNB **phy_vars_eNB, openair0_config_t *openair0_cfg, openair0_rf_map rf_map[MAX_NUM_CCs]);
#ifdef XFORMS
// current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
......@@ -223,9 +224,9 @@ static int time_offset[4] = {0,0,0,0};
static char UE_flag=0;
static uint8_t eNB_id=0,UE_id=0;
uint32_t carrier_freq[4] = {1907600000,1907600000,1907600000,1907600000}; /* For UE! */
static uint32_t downlink_frequency[4] = {1907600000,1907600000,1907600000,1907600000};
static int32_t uplink_frequency_offset[4]= {-120000000,-120000000,-120000000,-120000000};
uint32_t carrier_freq[MAX_NUM_CCs][4] = {{1907600000,1907600000,1907600000,1907600000}}; /* For UE! */
static uint32_t downlink_frequency[MAX_NUM_CCs][4] = {{1907600000,1907600000,1907600000,1907600000}};
static int32_t uplink_frequency_offset[MAX_NUM_CCs][4]= {{-120000000,-120000000,-120000000,-120000000}};
static char *conf_config_file_name = NULL;
#if defined(ENABLE_ITTI)
......@@ -1025,7 +1026,7 @@ static void * eNB_thread_rx(void *param) {
void init_eNB_proc() {
void init_eNB_proc(void) {
int i;
int CC_id;
......@@ -1085,7 +1086,7 @@ void init_eNB_proc() {
}
}
void kill_eNB_proc() {
void kill_eNB_proc(void) {
int i;
int *status_tx,*status_rx;
......@@ -1491,7 +1492,7 @@ static void *UE_thread(void *arg) {
int i, ret;
volatile unsigned int *DAQ_MBOX = openair0_daq_cnt();
#ifndef USRP
exmimo_config_t *p_exmimo_config = openair0_exmimo_pci[card].exmimo_config_ptr;;
//exmimo_config_t *p_exmimo_config = openair0_exmimo_pci[card].exmimo_config_ptr;;
#endif
......@@ -1657,14 +1658,14 @@ static void *UE_thread(void *arg) {
else {
LOG_I(PHY,"[initial_sync] trying carrier off %d Hz\n",openair_daq_vars.freq_offset);
#ifndef USRP
for (i=0; i<4; i++) {
if (p_exmimo_config->rf.rf_freq_rx[i])
p_exmimo_config->rf.rf_freq_rx[i] = carrier_freq[i]+openair_daq_vars.freq_offset;
if (p_exmimo_config->rf.rf_freq_tx[i])
p_exmimo_config->rf.rf_freq_tx[i] = carrier_freq[i]+openair_daq_vars.freq_offset;
for (card=0;card<MAX_CARDS;card++) {
for (i=0; i<openair0_cfg[card].rx_num_channels; i++) {
openair0_cfg[card].rx_freq[i] = carrier_freq[card][i]+openair_daq_vars.freq_offset;
openair0_cfg[card].tx_freq[i] = carrier_freq[card][i]+openair_daq_vars.freq_offset;
}
}
openair0_dump_config(&openair0_cfg[0],UE_flag);
#endif
openair0_dump_config(card);
rt_sleep_ns(FRAME_PERIOD);
}
}
......@@ -1772,15 +1773,17 @@ static void get_options (int argc, char **argv) {
multi_thread=0;
break;
case 'C':
downlink_frequency[0] = atof(optarg); // Use float to avoid issue with frequency over 2^31.
downlink_frequency[1] = downlink_frequency[0];
downlink_frequency[2] = downlink_frequency[0];
downlink_frequency[3] = downlink_frequency[0];
carrier_freq[0] = downlink_frequency[0];
carrier_freq[1] = downlink_frequency[1];
carrier_freq[2] = downlink_frequency[2];
carrier_freq[3] = downlink_frequency[3];
printf("Downlink frequency set to %u\n", downlink_frequency[0]);
for (CC_id=0;CC_id<MAX_NUM_CCs;CC_id++) {
downlink_frequency[CC_id][0] = atof(optarg); // Use float to avoid issue with frequency over 2^31.
downlink_frequency[CC_id][1] = downlink_frequency[CC_id][0];
downlink_frequency[CC_id][2] = downlink_frequency[CC_id][0];
downlink_frequency[CC_id][3] = downlink_frequency[CC_id][0];
carrier_freq[CC_id][0] = downlink_frequency[CC_id][0];
carrier_freq[CC_id][1] = downlink_frequency[CC_id][1];
carrier_freq[CC_id][2] = downlink_frequency[CC_id][2];
carrier_freq[CC_id][3] = downlink_frequency[CC_id][3];
}
printf("Downlink for CC_id %d frequency set to %u\n", CC_id, downlink_frequency[CC_id][0]);
break;
case 'd':
......@@ -1909,12 +1912,15 @@ static void get_options (int argc, char **argv) {
// adjust the log
for (k = 0 ; k < (sizeof(downlink_frequency) / sizeof (downlink_frequency[0])); k++) {
downlink_frequency[k] = enb_properties->properties[i]->downlink_frequency[0];
printf("Downlink frequency set to %u\n", downlink_frequency[k]);
uplink_frequency_offset[k] = enb_properties->properties[i]->uplink_frequency_offset[0];
} // k
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
for (k = 0 ; k < 4; k++) {
downlink_frequency[CC_id][k] = enb_properties->properties[i]->downlink_frequency[CC_id];
uplink_frequency_offset[CC_id][k] = enb_properties->properties[i]->uplink_frequency_offset[CC_id];
}
printf("Downlink frequency/ uplink offset of CC_id %d set to %llu/%d\n", CC_id,
enb_properties->properties[i]->downlink_frequency[CC_id],
enb_properties->properties[i]->uplink_frequency_offset[CC_id]);
} // CC_id
}// i
}
}
......@@ -1954,7 +1960,8 @@ int main(int argc, char **argv) {
#if defined (EMOS) || (! defined (RTAI))
int error_code;
#endif
openair0_config_t openair0_cfg;
memset(&openair0_cfg[0],0,sizeof(openair0_config_t)*MAX_CARDS);
set_latency_target();
......@@ -2159,17 +2166,17 @@ int main(int argc, char **argv) {
if ((mode == normal_txrx) || (mode == rx_calib_ue) || (mode == no_L2_connect) || (mode == debug_prach)) {
for (i=0;i<4;i++)
openair0_cfg.rxg_mode[i] = max_gain;
openair0_cfg[CC_id].rxg_mode[i] = max_gain;
PHY_vars_UE_g[CC_id][0]->rx_total_gain_dB = PHY_vars_UE_g[CC_id][0]->rx_gain_max[0] + (int)rx_gain - 30; //-30 because it was calibrated with a 30dB gain
}
else if ((mode == rx_calib_ue_med)) {
for (i=0;i<4;i++)
openair0_cfg.rxg_mode[i] = med_gain;
openair0_cfg[CC_id].rxg_mode[i] = med_gain;
PHY_vars_UE_g[CC_id][0]->rx_total_gain_dB = PHY_vars_UE_g[CC_id][0]->rx_gain_med[0] + (int)rx_gain - 30; //-30 because it was calibrated with a 30dB gain;
}
else if ((mode == rx_calib_ue_byp)) {
for (i=0;i<4;i++)
openair0_cfg.rxg_mode[i] = byp_gain;
openair0_cfg[CC_id].rxg_mode[i] = byp_gain;
PHY_vars_UE_g[CC_id][0]->rx_total_gain_dB = PHY_vars_UE_g[CC_id][0]->rx_gain_byp[0] + (int)rx_gain - 30; //-30 because it was calibrated with a 30dB gain;
}
......@@ -2214,6 +2221,9 @@ int main(int argc, char **argv) {
PHY_vars_eNB_g[0][CC_id]->rx_total_gain_eNB_dB = rxg_max[0] + (int)rx_gain - 30; //was measured at rxgain=30;
// set eNB to max gain
for (i=0;i<4;i++)
openair0_cfg[CC_id].rxg_mode[i] = max_gain;
}
NB_eNB_INST=1;
NB_INST=1;
......@@ -2223,9 +2233,6 @@ int main(int argc, char **argv) {
openair_daq_vars.ue_ul_nb_rb=6;
openair_daq_vars.target_ue_ul_mcs=6;
// set eNB to max gain
for (i=0;i<4;i++)
openair0_cfg.rxg_mode[i] = max_gain;
}
......@@ -2267,34 +2274,25 @@ int main(int argc, char **argv) {
#endif
}
mac_xface = malloc(sizeof(MAC_xface));
openair0_cfg.sample_rate = sample_rate;
openair0_cfg.tx_num_channels = frame_parms[0]->nb_antennas_tx;
openair0_cfg.rx_num_channels = frame_parms[0]->nb_antennas_rx;
for (CC_id=0;CC_id<MAX_NUM_CCs;CC_id++) {
openair0_cfg[CC_id].sample_rate = sample_rate;
openair0_cfg[CC_id].tx_bw = bw;
openair0_cfg[CC_id].rx_bw = bw;
for (i=0;i<4;i++) {
if (UE_flag==1) {
openair0_cfg.tx_freq[i] = downlink_frequency[i]+uplink_frequency_offset[i];
openair0_cfg.rx_freq[i] = downlink_frequency[i];
}
else {
openair0_cfg.rx_freq[i] = downlink_frequency[i]+uplink_frequency_offset[i];
openair0_cfg.tx_freq[i] = downlink_frequency[i];
}
openair0_cfg[CC_id].tx_gain[i] = tx_gain;
openair0_cfg[CC_id].rx_gain[i] = rx_gain;
}
openair0_cfg.tx_bw = bw;
openair0_cfg.rx_bw = bw;
for (i=0;i<4;i++) {
openair0_cfg.tx_gain[i] = tx_gain;
openair0_cfg.rx_gain[i] = rx_gain;
}
if (openair0_device_init(&openair0, &openair0_cfg) <0) {
if (openair0_device_init(&openair0, &openair0_cfg[0]) <0) {
printf("Exiting, cannot initialize device\n");
exit(-1);
}
mac_xface = malloc(sizeof(MAC_xface));
#ifdef OPENAIR2
int eMBMS_active=0;
......@@ -2338,30 +2336,37 @@ int main(int argc, char **argv) {
openair_daq_vars.timing_advance = 0;
openair0_rf_map rf_map[MAX_NUM_CCs];
rf_map[0].card=0;
rf_map[0].chain=1;
// connect the TX/RX buffers
if (UE_flag==1) {
for (CC_id=0;CC_id<MAX_NUM_CCs;CC_id++) {
setup_ue_buffers(PHY_vars_UE_g[CC_id][0],frame_parms[CC_id],ant_offset);
setup_ue_buffers(PHY_vars_UE_g[0],&openair0_cfg[0],rf_map);
printf("Setting UE buffer to all-RX\n");
// Set LSBs for antenna switch (ExpressMIMO)
for (CC_id=0;CC_id<MAX_NUM_CCs;CC_id++) {
for (i=0; i<frame_parms[CC_id]->samples_per_tti*10; i++)
for (aa=0; aa<frame_parms[CC_id]->nb_antennas_tx; aa++)
PHY_vars_UE_g[CC_id][0]->lte_ue_common_vars.txdata[aa][i] = 0x00010001;
PHY_vars_UE_g[0][CC_id]->lte_ue_common_vars.txdata[aa][i] = 0x00010001;
}
//p_exmimo_config->framing.tdd_config = TXRXSWITCH_TESTRX;
}
else {
for (CC_id=0;CC_id<MAX_NUM_CCs;CC_id++) {
setup_eNB_buffers(PHY_vars_eNB_g[CC_id][0],frame_parms[CC_id],ant_offset);
if (setup_eNB_buffers(PHY_vars_eNB_g[0],&openair0_cfg[0],rf_map)!=0) {
printf("Error setting up eNB buffer\n");
exit(-1);
}
printf("Setting eNB buffer to all-RX\n");
// Set LSBs for antenna switch (ExpressMIMO)
for (CC_id=0;CC_id<MAX_NUM_CCs;CC_id++) {
for (i=0; i<frame_parms[CC_id]->samples_per_tti*10; i++)
for (aa=0; aa<frame_parms[CC_id]->nb_antennas_tx; aa++)
PHY_vars_eNB_g[CC_id][0]->lte_eNB_common_vars.txdata[0][aa][i] = 0x00010001;
PHY_vars_eNB_g[0][CC_id]->lte_eNB_common_vars.txdata[0][aa][i] = 0x00010001;
}
}
#ifndef USRP
openair0_dump_config(card);
openair0_dump_config(&openair0_cfg[0],UE_flag);
#endif
/*
......@@ -2652,109 +2657,158 @@ int main(int argc, char **argv) {
return 0;
}
void setup_ue_buffers(PHY_VARS_UE *phy_vars_ue, LTE_DL_FRAME_PARMS *frame_parms, int carrier) {
int i;
int setup_ue_buffers(PHY_VARS_UE **phy_vars_ue, openair0_config_t *openair0_cfg, openair0_rf_map rf_map[MAX_NUM_CCs])
{
#ifndef USRP
if (phy_vars_ue) {
if ((frame_parms[0]->nb_antennas_rx>1) && (carrier>0)) {
printf("RX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
int i, CC_id;
LTE_DL_FRAME_PARMS *frame_parms;
for (CC_id=0;CC_id<MAX_NUM_CCs;CC_id++) {
if (phy_vars_ue[CC_id]) {
frame_parms = &(phy_vars_ue[CC_id]->lte_frame_parms);
}
if ((frame_parms[0]->nb_antennas_tx>1) && (carrier>0)) {
printf("TX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
else {
printf("phy_vars_eNB[%d] not initialized\n", CC_id);
return(-1);
}
// replace RX signal buffers with mmaped HW versions
for (i=0;i<frame_parms[0]->nb_antennas_rx;i++) {
free(phy_vars_ue->lte_ue_common_vars.rxdata[i]);
phy_vars_ue->lte_ue_common_vars.rxdata[i] = (int32_t*) openair0_exmimo_pci[card].adc_head[i+carrier];
openair0_cfg[CC_id].tx_num_channels = 0;
openair0_cfg[CC_id].rx_num_channels = 0;
// replace RX signal buffers with mmaped HW versions
for (i=0;i<frame_parms->nb_antennas_rx;i++) {
printf("Mapping eNB CC_id %d, rx_ant %d, freq %u on card %d, chain %d\n",CC_id,i,downlink_frequency[CC_id][i],rf_map[CC_id].card,rf_map[CC_id].chain+i);
free(phy_vars_ue[CC_id]->lte_ue_common_vars.rxdata[i]);
phy_vars_ue[CC_id]->lte_ue_common_vars.rxdata[i] = (int32_t*) openair0_exmimo_pci[rf_map[CC_id].card].adc_head[rf_map[CC_id].chain+i];
if (openair0_cfg[rf_map[CC_id].card].rx_freq[rf_map[CC_id].chain+i]) {
printf("Error with rf_map! A channel has already been allocated!\n");
return(-1);
}
else {
openair0_cfg[rf_map[CC_id].card].rx_freq[rf_map[CC_id].chain+i] = downlink_frequency[CC_id][i];
openair0_cfg[rf_map[CC_id].card].rx_num_channels++;
}
printf("rxdata[%d] @ %p\n",i,phy_vars_ue->lte_ue_common_vars.rxdata[i]);
printf("rxdata[%d] @ %p\n",i,phy_vars_ue[CC_id]->lte_ue_common_vars.rxdata[i]);
}
for (i=0;i<frame_parms->nb_antennas_tx;i++) {
printf("Mapping eNB CC_id %d, tx_ant %d, freq %u on card %d, chain %d\n",CC_id,i,downlink_frequency[CC_id][i],rf_map[CC_id].card,rf_map[CC_id].chain+i);
free(phy_vars_ue[CC_id]->lte_ue_common_vars.txdata[i]);
phy_vars_ue[CC_id]->lte_ue_common_vars.txdata[i] = (int32_t*) openair0_exmimo_pci[rf_map[CC_id].card].dac_head[rf_map[CC_id].chain+i];
if (openair0_cfg[rf_map[CC_id].card].tx_freq[rf_map[CC_id].chain+i]) {
printf("Error with rf_map! A channel has already been allocated!\n");
return(-1);
}
else {
openair0_cfg[rf_map[CC_id].card].tx_freq[rf_map[CC_id].chain+i] = downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i];
openair0_cfg[rf_map[CC_id].card].tx_num_channels++;
}
for (i=0;i<frame_parms[0]->nb_antennas_tx;i++) {
free(phy_vars_ue->lte_ue_common_vars.txdata[i]);
phy_vars_ue->lte_ue_common_vars.txdata[i] = (int32_t*) openair0_exmimo_pci[card].dac_head[i+carrier];
printf("txdata[%d] @ %p\n",i,phy_vars_ue->lte_ue_common_vars.txdata[i]);
printf("txdata[%d] @ %p\n",i,phy_vars_ue[CC_id]->lte_ue_common_vars.txdata[i]);
}
}
return(0);
#else
printf("USRP not supported for UE yet!");
return(-1);
#endif
}
void setup_eNB_buffers(PHY_VARS_eNB *phy_vars_eNB, LTE_DL_FRAME_PARMS *frame_parms, int carrier) {
/* this function maps the phy_vars_eNB tx and rx buffers to the available rf chains.
Each rf chain is is addressed by the card number and the chain on the card. The
rf_map specifies for each CC, on which rf chain the mapping should start. Multiple
antennas are mapped to successive RF chains on the same card. */
int setup_eNB_buffers(PHY_VARS_eNB **phy_vars_eNB, openair0_config_t *openair0_cfg, openair0_rf_map rf_map[MAX_NUM_CCs]) {
int i;
int i, CC_id;
#ifdef USRP
uint16_t N_TA_offset = 0;
#else
int j;
#endif
LTE_DL_FRAME_PARMS *frame_parms;
if (phy_vars_eNB) {
if ((frame_parms[0].nb_antennas_rx>1) && (carrier>0)) {
printf("RX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
if (phy_vars_eNB[CC_id]) {
frame_parms = &(phy_vars_eNB[CC_id]->lte_frame_parms);
}
if ((frame_parms[0].nb_antennas_tx>1) && (carrier>0)) {
printf("TX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
else {
printf("phy_vars_eNB[%d] not initialized\n", CC_id);
return(-1);
}
#ifdef USRP
if (frame_parms[0].frame_type == TDD) {
if (phy_vars_eNB->lte_frame_parms.N_RB_DL == 100)
if (frame_parms->frame_type == TDD) {
if (frame_parms->N_RB_DL == 100)
N_TA_offset = 624;
else if (phy_vars_eNB->lte_frame_parms.N_RB_DL == 50)
else if (frame_parms->N_RB_DL == 50)
N_TA_offset = 624/2;
else if (phy_vars_eNB->lte_frame_parms.N_RB_DL == 25)
else if (frame_parms->N_RB_DL == 25)
N_TA_offset = 624/4;
}
#endif
openair0_cfg[CC_id].tx_num_channels = 0;
openair0_cfg[CC_id].rx_num_channels = 0;
// replace RX signal buffers with mmaped HW versions
#ifndef USRP
for (i=0;i<frame_parms[0]->nb_antennas_rx;i++) {
free(phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i]);
phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i] = (int32_t*) openair0_exmimo_pci[card].adc_head[i+carrier];
printf("rxdata[%d] @ %p\n",i,phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i]);
for (i=0;i<frame_parms->nb_antennas_rx;i++) {
printf("Mapping eNB CC_id %d, rx_ant %d, freq %u on card %d, chain %d\n",CC_id,i,downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i],rf_map[CC_id].card,rf_map[CC_id].chain+i);
free(phy_vars_eNB[CC_id]->lte_eNB_common_vars.rxdata[0][i]);
phy_vars_eNB[CC_id]->lte_eNB_common_vars.rxdata[0][i] = (int32_t*) openair0_exmimo_pci[rf_map[CC_id].card].adc_head[rf_map[CC_id].chain+i];
if (openair0_cfg[rf_map[CC_id].card].rx_freq[rf_map[CC_id].chain+i]) {
printf("Error with rf_map! A channel has already been allocated!\n");
return(-1);
}
else {
openair0_cfg[rf_map[CC_id].card].rx_freq[rf_map[CC_id].chain+i] = downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i];
openair0_cfg[rf_map[CC_id].card].rx_num_channels++;
}
printf("rxdata[%d] @ %p\n",i,phy_vars_eNB[CC_id]->lte_eNB_common_vars.rxdata[0][i]);
for (j=0;j<16;j++) {
printf("rxbuffer %d: %x\n",j,phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i][j]);
phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i][j] = 16-j;
printf("rxbuffer %d: %x\n",j,phy_vars_eNB[CC_id]->lte_eNB_common_vars.rxdata[0][i][j]);
phy_vars_eNB[CC_id]->lte_eNB_common_vars.rxdata[0][i][j] = 16-j;
}
}
for (i=0;i<frame_parms[0]->nb_antennas_tx;i++) {
free(phy_vars_eNB->lte_eNB_common_vars.txdata[0][i]);
phy_vars_eNB->lte_eNB_common_vars.txdata[0][i] = (int32_t*) openair0_exmimo_pci[card].dac_head[i+carrier];
for (i=0;i<frame_parms->nb_antennas_tx;i++) {
printf("Mapping eNB CC_id %d, tx_ant %d, freq %u on card %d, chain %d\n",CC_id,i,downlink_frequency[CC_id][i],rf_map[CC_id].card,rf_map[CC_id].chain+i);
free(phy_vars_eNB[CC_id]->lte_eNB_common_vars.txdata[0][i]);
phy_vars_eNB[CC_id]->lte_eNB_common_vars.txdata[0][i] = (int32_t*) openair0_exmimo_pci[rf_map[CC_id].card].dac_head[rf_map[CC_id].chain+i];
if (openair0_cfg[rf_map[CC_id].card].tx_freq[rf_map[CC_id].chain+i]) {
printf("Error with rf_map! A channel has already been allocated!\n");
return(-1);
}
else {
openair0_cfg[rf_map[CC_id].card].tx_freq[rf_map[CC_id].chain+i] = downlink_frequency[CC_id][i];
openair0_cfg[rf_map[CC_id].card].tx_num_channels++;
}
printf("txdata[%d] @ %p\n",i,phy_vars_eNB->lte_eNB_common_vars.txdata[0][i]);
printf("txdata[%d] @ %p\n",i,phy_vars_eNB[CC_id]->lte_eNB_common_vars.txdata[0][i]);
for (j=0;j<16;j++) {
printf("txbuffer %d: %x\n",j,phy_vars_eNB->lte_eNB_common_vars.txdata[0][i][j]);
phy_vars_eNB->lte_eNB_common_vars.txdata[0][i][j] = 16-j;
printf("txbuffer %d: %x\n",j,phy_vars_eNB[CC_id]->lte_eNB_common_vars.txdata[0][i][j]);
phy_vars_eNB[CC_id]->lte_eNB_common_vars.txdata[0][i][j] = 16-j;
}
}
#else // USRP
for (i=0;i<frame_parms[0].nb_antennas_rx;i++) {
free(phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i]);
for (i=0;i<frame_parms->nb_antennas_rx;i++) {
free(phy_vars_eNB[CC_id]->lte_eNB_common_vars.rxdata[0][i]);
rxdata = (int32_t*)malloc16(samples_per_frame*sizeof(int32_t));
phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i] = rxdata-N_TA_offset; // N_TA offset for TDD
phy_vars_eNB[CC_id]->lte_eNB_common_vars.rxdata[0][i] = rxdata-N_TA_offset; // N_TA offset for TDD
memset(rxdata, 0, samples_per_frame*sizeof(int32_t));
printf("rxdata[%d] @ %p (%p)\n", i, phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i],rxdata);
printf("rxdata[%d] @ %p (%p)\n", i, phy_vars_eNB[CC_id]->lte_eNB_common_vars.rxdata[0][i],rxdata);
}
for (i=0;i<frame_parms[0].nb_antennas_tx;i++) {
free(phy_vars_eNB->lte_eNB_common_vars.txdata[0][i]);
for (i=0;i<frame_parms->nb_antennas_tx;i++) {
free(phy_vars_eNB[CC_id]->lte_eNB_common_vars.txdata[0][i]);
txdata = (int32_t*)malloc16(samples_per_frame*sizeof(int32_t));
phy_vars_eNB->lte_eNB_common_vars.txdata[0][i] = txdata;
phy_vars_eNB[CC_id]->lte_eNB_common_vars.txdata[0][i] = txdata;
memset(txdata, 0, samples_per_frame*sizeof(int32_t));
printf("txdata[%d] @ %p\n", i, phy_vars_eNB->lte_eNB_common_vars.txdata[0][i]);
printf("txdata[%d] @ %p\n", i, phy_vars_eNB[CC_id]->lte_eNB_common_vars.txdata[0][i]);
}
#endif
}
return(0);
}
targets/RT/USER/sched_dlsch.c
View file @ 2d73a4a3
......@@ -104,8 +104,8 @@ static void * dlsch_thread(void *param) {
char task_name[8];
#endif
int eNB_id = 0, UE_id = 0;
PHY_VARS_UE *phy_vars_ue = PHY_vars_UE_g[UE_id];
int eNB_id = 0, UE_id = 0, CC_id=0;
PHY_VARS_UE *phy_vars_ue = PHY_vars_UE_g[UE_id][CC_id];
if ((dlsch_thread_index <0) || (dlsch_thread_index>7)) {
LOG_E(PHY,"[SCHED][DLSCH] Illegal dlsch_thread_index %d (%p)!!!!\n",dlsch_thread_index,param);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment