Merge branch 'develop' of https://gitlab.eurecom.fr/oai/openairinterface5g into develop

cmake_targets/autotests/README.txt

@@ -205,6 +205,14 @@ Obj.#   Case#   Test#	Description
 01      85      04      Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
 01      85      05      Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
 
+02      55              lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Sony Experia M4 COTS UE for TX/1RX
+02      55      00      Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
+02      55      01      Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
+02      55      02      Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
+02      55      03      Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
+02      55      04      Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
+02      55      05      Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
+  
 
 01      64              lte-softmodem-noS1 tests
 

cmake_targets/autotests/run_exec_autotests.bash

 #!/bin/bash
+#******************************************************************************
+
+#    OpenAirInterface 
+#    Copyright(c) 1999 - 2014 Eurecom
+
+#    OpenAirInterface is free software: you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License as published by
+#    the Free Software Foundation, either version 3 of the License, or
+#    (at your option) any later version.
+
+
+#    OpenAirInterface is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with OpenAirInterface.The full GNU General Public License is 
+#   included in this distribution in the file called "COPYING". If not, 
+#   see <http://www.gnu.org/licenses/>.
+
+#  Contact Information
+#  OpenAirInterface Admin: openair_admin@eurecom.fr
+#  OpenAirInterface Tech : openair_tech@eurecom.fr
+#  OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
+  
+#  Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
 
 if [ -s $OPENAIR_DIR/cmake_targets/tools/build_helper ] ; then
    source $OPENAIR_DIR/cmake_targets/tools/build_helper
@@ -111,6 +141,8 @@ function test_compile() {
           compile_log_dir=`eval echo \"$OPENAIR_DIR/cmake_targets/log/\"`
           echo "Removing compilation log files in $compile_log_dir"
           rm -frv $compile_log_dir
+          echo "Executing $pre_exec_file $pre_exe_args ...."
+          eval $pre_exec_file  $pre_exec_args
           echo "Executing $compile_prog $compile_prog_args ...."
           eval $compile_prog  $compile_prog_args
           echo "Copying compilation log files to test case log directory: $log_dir"
@@ -280,7 +312,7 @@ function test_compile_and_run() {
            
           if [ -n "$pre_exec_file" ]; then
             {  echo " Executing $pre_exec_file $pre_exec_args " 
-               eval " echo '$mypassword' |sudo -S -E $pre_exec_file $pre_exec_args " ; }>> $temp_exec_log  2>&1
+               eval " $pre_exec_file $pre_exec_args " ; }>> $temp_exec_log  2>&1
 
           fi
           echo "Executing $main_exec $main_exec_args_array_index "
@@ -503,6 +535,7 @@ for search_expr in "${test_case_array[@]}"
     echo "search_expr_false = $search_expr_false"
     echo "nruns = $nruns"
 
+
     #eval $pre_exec
     compile_prog_out=`eval echo \"$compile_prog_out\"`
 

cmake_targets/autotests/tools/configure_cots_bandrich_ue.py

 #!/usr/bin/python 
+#******************************************************************************
+
+#    OpenAirInterface 
+#    Copyright(c) 1999 - 2014 Eurecom
+
+#    OpenAirInterface is free software: you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License as published by
+#    the Free Software Foundation, either version 3 of the License, or
+#    (at your option) any later version.
+
+
+#    OpenAirInterface is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with OpenAirInterface.The full GNU General Public License is 
+#   included in this distribution in the file called "COPYING". If not, 
+#   see <http://www.gnu.org/licenses/>.
+
+#  Contact Information
+#  OpenAirInterface Admin: openair_admin@eurecom.fr
+#  OpenAirInterface Tech : openair_tech@eurecom.fr
+#  OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
+  
+#  Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
 
 import time
 import serial
@@ -28,19 +58,24 @@ from lib_autotest import *
 def find_open_port():
    global serial_port, ser
    max_ports=100
+   serial_port=''
+   while True:
      if os.path.exists(serial_port) == True:
        return serial_port
      for port in range(2,100):
-      serial_port = '/dev/ttyUSB'+str(port)
-      if os.path.exists(serial_port) == True:
-         print 'New Serial Port : ' + serial_port
+        serial_port_tmp = '/dev/ttyUSB'+str(port)
+        if os.path.exists(serial_port_tmp) == True:
+           print 'New Serial Port : ' + serial_port_tmp
+           serial_port = serial_port_tmp
            break
-
+     if serial_port == '':
+        print" Not able to detect valid serial ports. Resetting the modem now..."
+        reset_ue()
+     else :
         ser = serial.Serial(port=serial_port)
         return
 
     
-    
 #serial_port = '/dev/ttyUSB2'
 bandrich_ppd_config = os.environ.get('OPENAIR_DIR') + '/cmake_targets/autotests/tools/wdial.bandrich.conf'
 

cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py

 #!/usr/bin/python 
+#******************************************************************************
+
+#    OpenAirInterface 
+#    Copyright(c) 1999 - 2014 Eurecom
+
+#    OpenAirInterface is free software: you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License as published by
+#    the Free Software Foundation, either version 3 of the License, or
+#    (at your option) any later version.
+
+
+#    OpenAirInterface is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with OpenAirInterface.The full GNU General Public License is 
+#   included in this distribution in the file called "COPYING". If not, 
+#   see <http://www.gnu.org/licenses/>.
+
+#  Contact Information
+#  OpenAirInterface Admin: openair_admin@eurecom.fr
+#  OpenAirInterface Tech : openair_tech@eurecom.fr
+#  OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
+  
+#  Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
 
 import time
 import serial
@@ -28,19 +58,26 @@ from lib_autotest import *
 def find_open_port():
    global serial_port, ser
    max_ports=100
+   serial_port=''
+   while True:
      if os.path.exists(serial_port) == True:
        return serial_port
-   for port in range(0,100):
-      serial_port = '/dev/ttyUSB'+str(port)
-      if os.path.exists(serial_port) == True:
-         print 'New Serial Port : ' + serial_port
+     for port in range(2,100):
+        serial_port_tmp = '/dev/ttyUSB'+str(port)
+        if os.path.exists(serial_port_tmp) == True:
+           print 'New Serial Port : ' + serial_port_tmp
+           serial_port = serial_port_tmp
            break
-
+     if serial_port == '':
+        print" Not able to detect valid serial ports. Resetting the modem now..."
+        reset_ue()
+     else :
         ser = serial.Serial(port=serial_port)
         return
 
 
 
+    
 #serial_port = '/dev/ttyUSB2'
 bandrich_ppd_config = os.environ.get('OPENAIR_DIR') + '/cmake_targets/autotests/tools/wdial.bandrich.conf'
 

cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py

+#!/usr/bin/python 
+
+import time
+import serial
+import os
+from pyroute2 import IPRoute
+import sys
+import re
+import threading
+import signal
+import traceback
+import os
+import commands
+
+# Find a device ID by running sudo adb devices
+# The device ID below is for Sony Xperia M4
+
+device_id='YT9115PX1E' 
+
+
+openair_dir = os.environ.get('OPENAIR_DIR')
+if openair_dir == None:
+  print "Error getting OPENAIR_DIR environment variable"
+  sys.exit(1)
+
+sys.path.append(os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/tools/'))
+
+from lib_autotest import *
+
+def signal_handler(signal, frame):
+        print('You pressed Ctrl+C!')
+        print('Exiting now...')
+        timeout=10
+        exit_flag=1
+        sys.exit(0)
+
+signal.signal(signal.SIGINT, signal_handler)
+
+# Find all the process IDs in a phone given the name of process
+def kill_processes(name):
+   print " Killing all processes by name..." + name
+   while 1:
+     cmd = 'sudo adb -s ' + device_id +' shell "ps |grep ' + name + '"' 
+     status, out = commands.getstatusoutput(cmd)
+     if status != 0:
+       print "Error execting command to kill process " + name
+       sys.exit(1)
+     print "Out = " + out
+     if out=='':
+       break;
+     out_arr = out.split()
+     pid_to_kill = out_arr[1]
+     print "Now killing process ID " + pid_to_kill + " on Phone" 
+     cmd = 'sudo adb -s ' + device_id +' shell "kill ' + pid_to_kill + '"' 
+     status, out = commands.getstatusoutput(cmd)
+     if status != 0:
+       print "Error execting command to kill process " + name
+       sys.exit(1)
+     print "Out = " + out
+
+def start_ue () :
+   #print 'Enter your commands below.\r\nInsert "exit" to leave the application.'
+   print 'Killing old iperf/ping sessions'
+   kill_processes('iperf')
+   kill_processes('ping')
+   print "Turning off airplane mode"
+   os.system('sudo -E adb devices')
+   os.system('sudo -E adb -s ' + device_id + ' shell \"settings put global airplane_mode_on 0; am broadcast -a android.intent.action.AIRPLANE_MODE --ez state false\"')
+
+   while 1:
+     time.sleep ( 2)
+     #Now we check if ppp0 interface is up and running
+     try:
+        cmd = 'sudo adb -s ' + device_id + ' shell netcfg |grep 192.'
+        status, out = commands.getstatusoutput(cmd)
+        if (out == '') :
+            print "Waiting for UE to connect and get IP Address..."
+        else :
+            print "UE is now connected. IP Address settings are..." + out
+            os.system('sleep 5')
+            os.system ('sudo adb -s ' + device_id  + ' shell ping ' + gw)
+            break
+     except Exception, e:
+        error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: '  + str(e.__class__) + " : " + str( e)
+        error = error + traceback.format_exc()
+        print error
+
+    
+
+def stop_ue():
+   print "Turning on airplane mode"
+   os.system('sudo adb devices')
+   os.system('sudo adb -s ' + device_id + ' shell \"settings put global airplane_mode_on 1; am broadcast -a android.intent.action.AIRPLANE_MODE --ez state true\" ')
+   print "Killing iperf/ping sessions"
+   kill_processes('iperf')
+   kill_processes('ping')
+   
+i=1
+gw='192.172.0.1'
+while i <  len(sys.argv):
+    arg=sys.argv[i]
+    if arg == '--start-ue' :
+        start_ue()
+    elif arg == '--stop-ue' :
+        stop_ue()
+    elif arg == '-gw' :
+        gw = sys.argv[i+1]
+        i=i+1
+    elif arg == '-h' :
+        print "--stop-ue:  Stop the UE. Turn on airplane mode" 
+        print "--start-ue:  Start the UE. Turn off airplane mode"
+        print "-gw:  Specify the default gw as sometimes the gateway/route arguments are not set properly via wvdial"
+    else :
+        print " Script called with wrong arguments, arg = " + arg
+        sys.exit()
+    i = i +1
+
+

cmake_targets/autotests/tools/find_usb_path.bash

 #!/bin/bash
+#******************************************************************************
+
+#    OpenAirInterface 
+#    Copyright(c) 1999 - 2014 Eurecom
+
+#    OpenAirInterface is free software: you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License as published by
+#    the Free Software Foundation, either version 3 of the License, or
+#    (at your option) any later version.
+
+
+#    OpenAirInterface is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with OpenAirInterface.The full GNU General Public License is 
+#   included in this distribution in the file called "COPYING". If not, 
+#   see <http://www.gnu.org/licenses/>.
+
+#  Contact Information
+#  OpenAirInterface Admin: openair_admin@eurecom.fr
+#  OpenAirInterface Tech : openair_tech@eurecom.fr
+#  OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
+  
+#  Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
+
 
 #arg1 idVendor
 #arg2 idProduct

cmake_targets/autotests/tools/iperf_script

 #!/bin/bash
+#******************************************************************************
+
+#    OpenAirInterface 
+#    Copyright(c) 1999 - 2014 Eurecom
+
+#    OpenAirInterface is free software: you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License as published by
+#    the Free Software Foundation, either version 3 of the License, or
+#    (at your option) any later version.
+
+
+#    OpenAirInterface is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with OpenAirInterface.The full GNU General Public License is 
+#   included in this distribution in the file called "COPYING". If not, 
+#   see <http://www.gnu.org/licenses/>.
+
+#  Contact Information
+#  OpenAirInterface Admin: openair_admin@eurecom.fr
+#  OpenAirInterface Tech : openair_tech@eurecom.fr
+#  OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
+  
+#  Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
 
 #arg1 timeout to wait before running the script
 #arg2 interface

cmake_targets/autotests/tools/iperf_script_phone

+#!/bin/bash
+#******************************************************************************
+
+#    OpenAirInterface 
+#    Copyright(c) 1999 - 2014 Eurecom
+
+#    OpenAirInterface is free software: you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License as published by
+#    the Free Software Foundation, either version 3 of the License, or
+#    (at your option) any later version.
+
+
+#    OpenAirInterface is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with OpenAirInterface.The full GNU General Public License is 
+#   included in this distribution in the file called "COPYING". If not, 
+#   see <http://www.gnu.org/licenses/>.
+
+#  Contact Information
+#  OpenAirInterface Admin: openair_admin@eurecom.fr
+#  OpenAirInterface Tech : openair_tech@eurecom.fr
+#  OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
+  
+#  Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
+
+#arg1 timeout to wait before running the script
+#arg2 interface
+#arg3 iperf arguments
+
+args=($*)
+timeout=${args[0]}
+device_id=${args[1]}
+iperf_args=(${args[@]:2})
+
+#array=${1:-1}
+echo "args =  ${args[@]}"
+echo "timeout = $timeout"
+echo "device_id = $device_id"
+echo "iperf_args = ${iperf_args[@]}"
+
+sleep $timeout
+
+while true ; do
+  cmd=`sudo adb -s $device_id shell netcfg |grep 192.`
+  if [ -z "$cmd" ]; then
+     echo "Wating for UE to connect and get IP Address..."
+     sleep 1
+  else 
+     echo "UE is not connected. IP Address settings are... $cmd"
+     break
+  fi
+done
+
+print "Starting iperf now..."
+
+sudo adb -s $device_id shell /data/local/tmp/iperf ${iperf_args[@]}

cmake_targets/autotests/tools/lib_autotest.py

 #!/usr/bin/python
+#******************************************************************************
+
+#    OpenAirInterface 
+#    Copyright(c) 1999 - 2014 Eurecom
+
+#    OpenAirInterface is free software: you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License as published by
+#    the Free Software Foundation, either version 3 of the License, or
+#    (at your option) any later version.
+
+
+#    OpenAirInterface is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with OpenAirInterface.The full GNU General Public License is 
+#   included in this distribution in the file called "COPYING". If not, 
+#   see <http://www.gnu.org/licenses/>.
+
+#  Contact Information
+#  OpenAirInterface Admin: openair_admin@eurecom.fr
+#  OpenAirInterface Tech : openair_tech@eurecom.fr
+#  OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
+  
+#  Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
 
 import os
 from pyroute2 import IPRoute

cmake_targets/autotests/tools/search_repl.py

 #!/usr/bin/python
+#******************************************************************************
+
+#    OpenAirInterface 
+#    Copyright(c) 1999 - 2014 Eurecom
+
+#    OpenAirInterface is free software: you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License as published by
+#    the Free Software Foundation, either version 3 of the License, or
+#    (at your option) any later version.
+
+
+#    OpenAirInterface is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with OpenAirInterface.The full GNU General Public License is 
+#   included in this distribution in the file called "COPYING". If not, 
+#   see <http://www.gnu.org/licenses/>.
+
+#  Contact Information
+#  OpenAirInterface Admin: openair_admin@eurecom.fr
+#  OpenAirInterface Tech : openair_tech@eurecom.fr
+#  OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
+  
+#  Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
+
 import sys
 import re
 import os

cmake_targets/tools/build_helper

@@ -270,7 +270,8 @@ check_install_oai_software() {
 	wvdial \
         python-numpy \
         sshpass \
-        libxslt1-dev
+        libxslt1-dev \
+        android-tools-adb
 
     $SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
     if [ `lsb_release -rs` = '12.04' ] ; then