Merge remote-tracking branch 'origin/develop-nr' into nr-polar-encoder-optimizations

cmake_targets/CMakeLists.txt

@@ -1357,6 +1357,7 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/TOOLS/time_meas.c
   ${OPENAIR1_DIR}/PHY/TOOLS/lut.c
   ${OPENAIR1_DIR}/PHY/INIT/nr_init_ue.c
+  #  ${OPENAIR1_DIR}/SIMULATION/NR_UE_PHY/unit_tests/src/pucch_uci_test.c
   ${PHY_POLARSRC}
   ${PHY_LDPCSRC}
   )

cmake_targets/build_oai

@@ -516,10 +516,10 @@ function main() {
         install_usrp_uhd_driver $UHD_IMAGES_DIR
       fi
     fi 
-    if [ "$HW" == "OAI_ADRV9371_ZC706" ] ; then
-      echo_info "\nInstalling packages for ADRV9371_ZC706 support"
-      check_install_libiio_driver
-    fi 
+#    if [ "$HW" == "OAI_ADRV9371_ZC706" ] ; then
+#      echo_info "\nInstalling packages for ADRV9371_ZC706 support"
+#      check_install_libiio_driver
+#    fi 
     if [ "$HW" == "OAI_BLADERF" ] ; then
       echo_info "installing packages for BLADERF support"
       check_install_bladerf_driver
@@ -836,9 +836,18 @@ function main() {
 	      echo_info "liboai_device.so is linked to EXMIMO device library"       
 	  elif [ "$HW" == "OAI_ADRV9371_ZC706" ] ; then
 
-        ln -sf $OPENAIR_DIR/targets/ARCH/ADRV9371_ZC706/slib/libadrv9371_zc706.so liboai_device.so
+			SYRIQ_KVER=$(uname -r)
+			SYRIQ_KMAJ=$(echo $SYRIQ_KVER | sed -e 's/^\([0-9][0-9]*\)\.[0-9][0-9]*\.[0-9][0-9]*.*/\1/')
+			SYRIQ_KMIN=$(echo $SYRIQ_KVER | sed -e 's/^[0-9][0-9]*\.\([0-9][0-9]*\)\.[0-9][0-9]*.*/\1/')
+			#echo $SYRIQ_KMAJ$SYRIQ_KMIN
+			if [ "$SYRIQ_KMAJ$SYRIQ_KMIN" == "319" ] || [ "$SYRIQ_KMAJ$SYRIQ_KMIN" == "410" ] || [ "$SYRIQ_KMAJ$SYRIQ_KMIN" == "415" ] ; then
+#				echo "Kernel $SYRIQ_KMAJ.$SYRIQ_KMIN detected"
+				ln -sf /usr/local/lib/syriq/libadrv9371zc706.so liboai_device.so
+			else
+				echo_error "== FAILED == Unexpected Kernel $SYRIQ_KMAJ.$SYRIQ_KMIN"
+			fi
+			echo_info "liboai_device.so is linked to ADRV9371_ZC706 device library for Kernel $SYRIQ_KMAJ.$SYRIQ_KMIN"
 
-	      echo_info "liboai_device.so is linked to ADRV9371_ZC706 device library"        
 	  elif [ "$HW" == "OAI_USRP" ] ; then
               compilations \
                   $build_dir oai_usrpdevif \

nfapi/open-nFAPI/nfapi/public_inc/fapi_nr_ue_interface.h

@@ -21,6 +21,7 @@
 #include "stddef.h"
 #include "platform_types.h"
 #include "fapi_nr_ue_constants.h"
+#include "PHY/impl_defs_nr.h"
 
 /*
 typedef unsigned int	   uint32_t;
@@ -150,6 +151,10 @@ typedef struct {
 	typedef struct {
 		uint16_t rnti;
 		uint8_t dci_format;
+		// n_CCE index of first CCE for PDCCH reception
+		int n_CCE;
+		// N_CCE is L, or number of CCEs for DCI
+		int N_CCE;
         fapi_nr_dci_pdu_rel15_t dci;
 	} fapi_nr_dci_indication_pdu_t;
 
@@ -232,11 +237,92 @@ typedef struct {
         uint16_t root_sequence_index;
         uint16_t rsrp_threshold_ssb;
         uint16_t rsrp_threshold_sul;
+        uint16_t prach_freq_offset;
     } fapi_nr_ul_config_prach_pdu;
 
     typedef struct {
 
+        pucch_format_nr_t      format;              /* format   0    1    2    3    4    */
+        uint8_t                initialCyclicShift;  /*          x    x                   */
+        uint8_t                nrofSymbols;         /*          x    x    x    x    x    */
+        uint8_t                startingSymbolIndex; /*          x    x    x    x    x    */
+        uint8_t                timeDomainOCC;       /*               x                   */
+        uint8_t                nrofPRBs;            /*                    x    x         */
+        uint16_t               startingPRB;         /*                                     maxNrofPhysicalResourceBlocks  = 275 */
+        uint8_t                occ_length;          /*                              x    */
+        uint8_t                occ_Index;           /*                              x    */
+
+        feature_status_t       intraSlotFrequencyHopping;
+        uint16_t               secondHopPRB;
+
+        /*
+         -- Enabling inter-slot frequency hopping when PUCCH Format 1, 3 or 4 is repeated over multiple slots.
+         -- The field is not applicable for format 2.
+         */
+        feature_status_t       interslotFrequencyHopping;
+        /*
+            -- Enabling 2 DMRS symbols per hop of a PUCCH Format 3 or 4 if both hops are more than X symbols when FH is enabled (X=4).
+            -- Enabling 4 DMRS sybmols for a PUCCH Format 3 or 4 with more than 2X+1 symbols when FH is disabled (X=4).
+            -- Corresponds to L1 parameter 'PUCCH-F3-F4-additional-DMRS' (see 38.213, section 9.2.1)
+            -- The field is not applicable for format 1 and 2.
+        */
+        enable_feature_t       additionalDMRS;
+        /*
+            -- Max coding rate to determine how to feedback UCI on PUCCH for format 2, 3 or 4
+            -- Corresponds to L1 parameter 'PUCCH-F2-maximum-coderate', 'PUCCH-F3-maximum-coderate' and 'PUCCH-F4-maximum-coderate'
+            -- (see 38.213, section 9.2.5)
+            -- The field is not applicable for format 1.
+         */
+        PUCCH_MaxCodeRate_t    maxCodeRate;
+        /*
+            -- Number of slots with the same PUCCH F1, F3 or F4. When the field is absent the UE applies the value n1.
+            -- Corresponds to L1 parameter 'PUCCH-F1-number-of-slots', 'PUCCH-F3-number-of-slots' and 'PUCCH-F4-number-of-slots'
+            -- (see 38.213, section 9.2.6)
+            -- The field is not applicable for format 2.
+         */
+        uint8_t                nrofSlots;
+        /*
+            -- Enabling pi/2 BPSK for UCI symbols instead of QPSK for PUCCH.
+            -- Corresponds to L1 parameter 'PUCCH-PF3-PF4-pi/2PBSK' (see 38.213, section 9.2.5)
+            -- The field is not applicable for format 1 and 2.
+         */
+        feature_status_t       pi2PBSK;
+        /*
+            -- Enabling simultaneous transmission of CSI and HARQ-ACK feedback with or without SR with PUCCH Format 2, 3 or 4
+            -- Corresponds to L1 parameter 'PUCCH-F2-Simultaneous-HARQ-ACK-CSI', 'PUCCH-F3-Simultaneous-HARQ-ACK-CSI' and
+            -- 'PUCCH-F4-Simultaneous-HARQ-ACK-CSI' (see 38.213, section 9.2.5)
+            -- When the field is absent the UE applies the value OFF
+            -- The field is not applicable for format 1.
+         */
+        enable_feature_t       simultaneousHARQ_ACK_CSI;
+        /*
+              -- Configuration of group- and sequence hopping for all the PUCCH formats 0, 1, 3 and 4. "neither" implies neither group
+              -- or sequence hopping is enabled. "enable" enables group hopping and disables sequence hopping. "disable"” disables group
+              -- hopping and enables sequence hopping. Corresponds to L1 parameter 'PUCCH-GroupHopping' (see 38.211, section 6.4.1.3)
+              pucch-GroupHopping            ENUMERATED { neither, enable, disable },
+         */
+        pucch_GroupHopping_t   pucch_GroupHopping;
+        /*
+              -- Cell-Specific scrambling ID for group hoppping and sequence hopping if enabled.
+              -- Corresponds to L1 parameter 'HoppingID' (see 38.211, section 6.3.2.2)
+              hoppingId               BIT STRING (SIZE (10))                              OPTIONAL,   -- Need R
+         */
+        uint16_t               hoppingId;
+        /*
+              -- Power control parameter P0 for PUCCH transmissions. Value in dBm. Only even values (step size 2) allowed.
+              -- Corresponds to L1 parameter 'p0-nominal-pucch' (see 38.213, section 7.2)
+              p0-nominal                INTEGER (-202..24)                                OPTIONAL,   -- Need R
+         */
+        int8_t                 p0_nominal;
+
+        int8_t                 deltaF_PUCCH_f[NUMBER_PUCCH_FORMAT_NR];
+        uint8_t                p0_PUCCH_Id;     /* INTEGER (1..8)     */
+        int8_t                 p0_PUCCH_Value;
+        // pathlossReferenceRSs        SEQUENCE (SIZE (1..maxNrofPUCCH-PathlossReferenceRSs)) OF PUCCH-PathlossReferenceRS OPTIONAL, -- Need M
+        int8_t                 twoPUCCH_PC_AdjustmentStates;
+
     } fapi_nr_ul_config_pucch_pdu;
+
     typedef enum {pusch_freq_hopping_disabled = 0 , pusch_freq_hopping_enabled = 1}pusch_freq_hopping_t;
     typedef struct{
     uint8_t aperiodicSRS_ResourceTrigger;

oaienv

@@ -18,5 +18,6 @@ alias oailte='cd $OPENAIR_TARGETS/RT/USER'
 alias oais='cd $OPENAIR_TARGETS/SIMU/USER'
 alias oaiex='cd $OPENAIR_TARGETS/SIMU/EXAMPLES'
 
-export IIOD_REMOTE=192.168.121.32
+#export IIOD_REMOTE=192.168.121.32
+export IIOD_REMOTE=192.168.1.11
 

openair1/PHY/NR_UE_TRANSPORT/pucch_nr.h

@@ -82,6 +82,7 @@ void nr_generate_pucch1(PHY_VARS_NR_UE *ue,
                         uint8_t timeDomainOCC,
                         uint8_t nr_bit);
 void nr_generate_pucch2(PHY_VARS_NR_UE *ue,
+                        uint16_t crnti,
                         int32_t **txdataF,
                         NR_DL_FRAME_PARMS *frame_parms,
                         PUCCH_CONFIG_DEDICATED *pucch_config_dedicated,
@@ -94,6 +95,7 @@ void nr_generate_pucch2(PHY_VARS_NR_UE *ue,
                         uint16_t startingPRB,
                         uint8_t nr_bit);
 void nr_generate_pucch3_4(PHY_VARS_NR_UE *ue,
+                          uint16_t crnti,
                           int32_t **txdataF,
                           NR_DL_FRAME_PARMS *frame_parms,
                           pucch_format_nr_t fmt,
@@ -397,7 +399,7 @@ void nr_generate_pucch3_4(PHY_VARS_NR_UE *ue,
    */
     int16_t table_6_3_2_4_1_2_Wi_Re[8][7][7] = {
     {{0,0,0,0,0,0,0},                            {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0}},
-    {{0,0,0,0,0,0,0},                            {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0}},
+    {{32767,0,0,0,0,0,0},                        {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0}},
     {{32767,32767,0,0,0,0,0},                    {32767,-32767,0,0,0,0,0},                     {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0}},
     {{32767,32767,32767,0,0,0,0},                {32767,-16384,-16384,0,0,0,0},                {32767,-16384,-16384,0,0,0,0},                {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0}},
     {{32767,32767,32767,32767,0,0,0},            {32767,-32767,32767,-32767,0,0,0},            {32767,32767,-32767,-32767,0,0,0},            {32767,-32767,-32767,32767,0,0,0},            {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0},                              {0,0,0,0,0,0,0}},

openair1/SCHED_NR_UE/fapi_nr_ue_l1.c

@@ -37,6 +37,7 @@
 //#include "PHY/phy_vars_nr_ue.h"
 
 #include "PHY/defs_nr_UE.h"
+#include "PHY/impl_defs_nr.h"
 extern PHY_VARS_NR_UE ***PHY_vars_UE_g;
 
 int8_t nr_ue_scheduled_response(nr_scheduled_response_t *scheduled_response){
@@ -51,11 +52,15 @@ int8_t nr_ue_scheduled_response(nr_scheduled_response_t *scheduled_response){
         NR_UE_PDCCH *pdcch_vars2 = PHY_vars_UE_g[module_id][cc_id]->pdcch_vars[0][0];
         NR_UE_DLSCH_t *dlsch0 = PHY_vars_UE_g[module_id][cc_id]->dlsch[0][0];
         NR_UE_ULSCH_t *ulsch0 = PHY_vars_UE_g[module_id][cc_id]->ulsch[0];
+        NR_DL_FRAME_PARMS frame_parms = PHY_vars_UE_g[module_id][cc_id]->frame_parms;
+        PRACH_RESOURCES_t *prach_resources = PHY_vars_UE_g[module_id][cc_id]->prach_resources[0];
+        
+//        PUCCH_ConfigCommon_nr_t    *pucch_config_common = PHY_vars_UE_g[module_id][cc_id]->pucch_config_common_nr[0];
+//        PUCCH_Config_t             *pucch_config_dedicated = PHY_vars_UE_g[module_id][cc_id]->pucch_config_dedicated_nr[0];
 
         if(scheduled_response->dl_config != NULL){
             fapi_nr_dl_config_request_t *dl_config = scheduled_response->dl_config;
 
-
             for(i=0; i<dl_config->number_pdus; ++i){
                 if(dl_config->dl_config_list[i].pdu_type == FAPI_NR_DL_CONFIG_TYPE_DCI){
                     pdcch_vars2->nb_search_space = pdcch_vars2->nb_search_space + 1;
@@ -143,6 +148,52 @@ int8_t nr_ue_scheduled_response(nr_scheduled_response_t *scheduled_response){
                      ulsch0->harq_processes[current_harq_pid]->rvidx = pusch_config_pdu->rv;
                      ulsch0->f_pusch = pusch_config_pdu->absolute_delta_PUSCH;
                  }
+                 if(ul_config->ul_config_list[i].pdu_type == FAPI_NR_UL_CONFIG_TYPE_PUCCH){
+                     // pucch config pdu
+                     fapi_nr_ul_config_pucch_pdu *pucch_config_pdu = &ul_config->ul_config_list[i].pucch_config_pdu;
+                     uint8_t pucch_resource_id = 0; //FIXME!!!
+                     uint8_t format = 1; // FIXME!!!
+                     PHY_vars_UE_g[module_id][cc_id]->pucch_config_dedicated_nr[0].PUCCH_Resource[pucch_resource_id]->format_parameters.initialCyclicShift = pucch_config_pdu->initialCyclicShift;
+                     PHY_vars_UE_g[module_id][cc_id]->pucch_config_dedicated_nr[0].PUCCH_Resource[pucch_resource_id]->format_parameters.nrofSymbols = pucch_config_pdu->nrofSymbols;
+                     PHY_vars_UE_g[module_id][cc_id]->pucch_config_dedicated_nr[0].PUCCH_Resource[pucch_resource_id]->format_parameters.startingSymbolIndex = pucch_config_pdu->startingSymbolIndex;
+                     PHY_vars_UE_g[module_id][cc_id]->pucch_config_dedicated_nr[0].PUCCH_Resource[pucch_resource_id]->format_parameters.nrofPRBs = pucch_config_pdu->nrofPRBs;
+                     PHY_vars_UE_g[module_id][cc_id]->pucch_config_dedicated_nr[0].PUCCH_Resource[pucch_resource_id]->startingPRB = pucch_config_pdu->startingPRB;
+                     PHY_vars_UE_g[module_id][cc_id]->pucch_config_dedicated_nr[0].PUCCH_Resource[pucch_resource_id]->format_parameters.timeDomainOCC = pucch_config_pdu->timeDomainOCC;
+                     PHY_vars_UE_g[module_id][cc_id]->pucch_config_dedicated_nr[0].PUCCH_Resource[pucch_resource_id]->format_parameters.occ_length = pucch_config_pdu->occ_length;
+                     PHY_vars_UE_g[module_id][cc_id]->pucch_config_dedicated_nr[0].PUCCH_Resource[pucch_resource_id]->format_parameters.occ_Index = pucch_config_pdu->occ_Index;
+                     PHY_vars_UE_g[module_id][cc_id]->pucch_config_dedicated_nr[0].PUCCH_Resource[pucch_resource_id]->intraSlotFrequencyHopping = pucch_config_pdu->intraSlotFrequencyHopping;
+                     PHY_vars_UE_g[module_id][cc_id]->pucch_config_dedicated_nr[0].PUCCH_Resource[pucch_resource_id]->secondHopPRB = pucch_config_pdu->secondHopPRB; // Not sure this parameter is used
+                     PHY_vars_UE_g[module_id][cc_id]->pucch_config_dedicated_nr[0].formatConfig[format-1]->additionalDMRS = pucch_config_pdu->additionalDMRS; // At this point we need to know which format is going to be used
+                     PHY_vars_UE_g[module_id][cc_id]->pucch_config_dedicated_nr[0].formatConfig[format-1]->pi2PBSK = pucch_config_pdu->pi2PBSK;
+                     PHY_vars_UE_g[module_id][cc_id]->pucch_config_common_nr[0].pucch_GroupHopping = pucch_config_pdu->pucch_GroupHopping;
+                     PHY_vars_UE_g[module_id][cc_id]->pucch_config_common_nr[0].hoppingId = pucch_config_pdu->hoppingId;
+                     PHY_vars_UE_g[module_id][cc_id]->pucch_config_common_nr[0].p0_nominal = pucch_config_pdu->p0_nominal;
+/*                     pucch_config_dedicated->PUCCH_Resource[pucch_resource_id]->format_parameters.initialCyclicShift = pucch_config_pdu->initialCyclicShift;
+                     pucch_config_dedicated->PUCCH_Resource[pucch_resource_id]->format_parameters.nrofSymbols = pucch_config_pdu->nrofSymbols;
+                     pucch_config_dedicated->PUCCH_Resource[pucch_resource_id]->format_parameters.startingSymbolIndex = pucch_config_pdu->startingSymbolIndex;
+                     pucch_config_dedicated->PUCCH_Resource[pucch_resource_id]->format_parameters.nrofPRBs = pucch_config_pdu->nrofPRBs;
+                     pucch_config_dedicated->PUCCH_Resource[pucch_resource_id]->startingPRB = pucch_config_pdu->startingPRB;
+                     pucch_config_dedicated->PUCCH_Resource[pucch_resource_id]->format_parameters.timeDomainOCC = pucch_config_pdu->timeDomainOCC;
+                     pucch_config_dedicated->PUCCH_Resource[pucch_resource_id]->format_parameters.occ_length = pucch_config_pdu->occ_length;
+                     pucch_config_dedicated->PUCCH_Resource[pucch_resource_id]->format_parameters.occ_Index = pucch_config_pdu->occ_Index;
+                     pucch_config_dedicated->PUCCH_Resource[pucch_resource_id]->intraSlotFrequencyHopping = pucch_config_pdu->intraSlotFrequencyHopping;
+                     pucch_config_dedicated->PUCCH_Resource[pucch_resource_id]->secondHopPRB = pucch_config_pdu->secondHopPRB; // Not sure this parameter is used
+                     pucch_config_dedicated->formatConfig[format-1]->additionalDMRS = pucch_config_pdu->additionalDMRS; // At this point we need to know which format is going to be used
+                     pucch_config_dedicated->formatConfig[format-1]->pi2PBSK = pucch_config_pdu->pi2PBSK;
+                     pucch_config_common->pucch_GroupHopping = pucch_config_pdu->pucch_GroupHopping;
+                     pucch_config_common->hoppingId = pucch_config_pdu->hoppingId;
+                     pucch_config_common->p0_nominal = pucch_config_pdu->p0_nominal;*/
+                 }
+                 if(ul_config->ul_config_list[i].pdu_type == FAPI_NR_UL_CONFIG_TYPE_PRACH){
+                     // prach config pdu
+                     fapi_nr_ul_config_prach_pdu *prach_config_pdu = &ul_config->ul_config_list[i].prach_config_pdu;
+                     frame_parms.prach_config_common.rootSequenceIndex = prach_config_pdu->root_sequence_index;
+                     frame_parms.prach_config_common.prach_ConfigInfo.prach_ConfigIndex = prach_config_pdu->prach_configuration_index;
+                     frame_parms.prach_config_common.prach_ConfigInfo.zeroCorrelationZoneConfig = prach_config_pdu->zero_correlation_zone_config;
+                     frame_parms.prach_config_common.prach_ConfigInfo.highSpeedFlag = prach_config_pdu->restrictedset_config;
+                     frame_parms.prach_config_common.prach_ConfigInfo.prach_FreqOffset = prach_config_pdu->prach_freq_offset;
+                     prach_resources->ra_PreambleIndex = prach_config_pdu->preamble_index;
+                 }
              }
         }else{
             

openair1/SCHED_NR_UE/harq_nr.c

@@ -373,7 +373,7 @@ void config_downlink_harq_process(PHY_VARS_NR_UE *ue, int gNB_id, int TB_id, int
 {
   NR_UE_DLSCH_t *dlsch;
 
-  //dlsch = (NR_UE_DLSCH_t *)malloc16(sizeof(NR_UE_DLSCH_t));
+  dlsch = (NR_UE_DLSCH_t *)malloc16(sizeof(NR_UE_DLSCH_t));
 
   if (dlsch != NULL) {
 

openair1/SCHED_NR_UE/phy_procedures_nr_ue.c

@@ -3907,6 +3907,9 @@ int nr_ue_pdcch_procedures(uint8_t eNB_id,PHY_VARS_NR_UE *ue,UE_nr_rxtx_proc_t *
 
        ue->dci_ind.dci_list[i].rnti = dci_alloc_rx[i].rnti;
        ue->dci_ind.dci_list[i].dci_format = dci_alloc_rx[i].format;
+       ue->dci_ind.dci_list[i].n_CCE = dci_alloc_rx[i].firstCCE;
+       ue->dci_ind.dci_list[i].N_CCE = (int)dci_alloc_rx[i].L;
+       ue->dci_ind.number_of_dcis = ue->dci_ind.number_of_dcis + 1;
         memcpy(&ue->dci_ind.dci_list[i].dci, &nr_dci_info_extracted, sizeof(fapi_nr_dci_pdu_rel15_t) );
  
         //printf(">>> example mcs=%d\n",nr_dci_info_extracted.mcs);

openair1/SCHED_NR_UE/pucch_uci_ue_nr.c

@@ -178,7 +178,7 @@ bool pucch_procedures_ue_nr(PHY_VARS_NR_UE *ue, uint8_t gNB_id, UE_nr_rxtx_proc_
   int       ri_status = 0;
   int       csi_status = 0;
 
-  int       initial_pucch_id = NB_INITIAL_PUCCH_RESOURCE;;
+  int       initial_pucch_id = NB_INITIAL_PUCCH_RESOURCE;
   int       pucch_resource_set = MAX_NB_OF_PUCCH_RESOURCE_SETS;
   int       pucch_resource_id = MAX_NB_OF_PUCCH_RESOURCES;
   int       pucch_resource_indicator = MAX_PUCCH_RESOURCE_INDICATOR;
@@ -587,7 +587,9 @@ bool pucch_procedures_ue_nr(PHY_VARS_NR_UE *ue, uint8_t gNB_id, UE_nr_rxtx_proc_
     }
     case pucch_format2_nr:
     {
-      nr_generate_pucch2(ue,ue->common_vars.txdataF,
+      nr_generate_pucch2(ue,
+                         ue->pdcch_vars[ue->current_thread_id[proc->nr_tti_rx]][gNB_id]->crnti,
+                         ue->common_vars.txdataF,
                          &ue->frame_parms,
                          &ue->pucch_config_dedicated_nr[gNB_id],
                          pucch_payload,
@@ -603,7 +605,9 @@ bool pucch_procedures_ue_nr(PHY_VARS_NR_UE *ue, uint8_t gNB_id, UE_nr_rxtx_proc_
     case pucch_format3_nr:
     case pucch_format4_nr:
     {
-      nr_generate_pucch3_4(ue,ue->common_vars.txdataF,
+      nr_generate_pucch3_4(ue,
+                           ue->pdcch_vars[ue->current_thread_id[proc->nr_tti_rx]][gNB_id]->crnti,
+                           ue->common_vars.txdataF,
                            &ue->frame_parms,
                            format,
                            &ue->pucch_config_dedicated_nr[gNB_id],
@@ -871,6 +875,10 @@ boolean_t select_pucch_resource(PHY_VARS_NR_UE *ue, uint8_t gNB_id, int uci_size
     else  {
       /* see TS 38.213 9.2.1  PUCCH Resource Sets */
       int delta_PRI = harq_status->pucch_resource_indicator;
+      // n_CCE can be obtained from ue->dci_ind.dci_list[i].n_CCE. FIXME!!!
+      // N_CCE can be obtained from ue->dci_ind.dci_list[i].N_CCE. FIXME!!!
+      //int n_CCE = ue->dci_ind.dci_list[0].n_CCE;
+      //int N_CCE = ue->dci_ind.dci_list[0].N_CCE;
       int n_CCE_0 = harq_status->n_CCE;
       int N_CCE_0 = harq_status->N_CCE;
       if (N_CCE_0 == 0) {

openair1/SIMULATION/NR_UE_PHY/unit_tests/src/pss_util_test.c

@@ -70,7 +70,7 @@ static  nfapi_config_request_t* config =&config_t;
 
 /*************** FUNCTIONS ****************************************/
 
-void phy_init_nr_top(NR_DL_FRAME_PARMS *frame_parms);
+//void phy_init_nr_top(NR_DL_FRAME_PARMS *frame_parms);
 int init_nr_ue_signal(PHY_VARS_NR_UE *ue, int nb_connected_eNB, uint8_t abstraction_flag);
 
 /*******************************************************************
@@ -262,7 +262,7 @@ int init_test(unsigned char N_tx, unsigned char N_rx, unsigned char transmission
 
   PHY_vars_UE->frame_parms.Nid_cell = (3 * N_ID_1_NUMBER) + N_ID_2_NUMBER; /* set to unvalid value */
 
-  phy_init_nr_top(frame_parms);
+  //phy_init_nr_top(frame_parms);
 
   if (init_nr_ue_signal(PHY_vars_UE, 1, 0) != 0)
   {

openair2/NR_UE_PHY_INTERFACE/NR_IF_Module.c

@@ -64,6 +64,18 @@ int8_t handle_dci(module_id_t module_id, int cc_id, uint8_t gNB_index, fapi_nr_d
 
     return nr_ue_process_dci(module_id, cc_id, gNB_index, dci, rnti, dci_type);
 
+}
+//  L2 Abstraction Layer
+int8_t handle_dlsch (module_id_t module_id, int cc_id, uint8_t gNB_index, fapi_nr_dci_indication_t *dci_ind, uint8_t *pduP, uint32_t pdu_len){
+
+//    return 0;
+    return nr_ue_process_dlsch( module_id,
+                                cc_id,
+                                gNB_index,
+                                &dci_ind,
+                                pduP,
+                                pdu_len);
+
 }
 
 int8_t nr_ue_ul_indication(nr_uplink_indication_t *ul_info){
@@ -115,36 +127,6 @@ int8_t nr_ue_dl_indication(nr_downlink_indication_t *dl_info){
 
     //  clean up scheduled_response structure
 
-    if(dl_info->rx_ind != NULL){
-        printf("[L2][IF MODULE][DL INDICATION][RX_IND]\n");
-        for(i=0; i<dl_info->rx_ind->number_pdus; ++i){
-            switch(dl_info->rx_ind->rx_indication_body[i].pdu_type){
-                case FAPI_NR_RX_PDU_TYPE_MIB:
-                    ret_mask |= (handle_bcch_bch(dl_info->module_id, dl_info->cc_id, dl_info->gNB_index,
-                                (dl_info->rx_ind->rx_indication_body+i)->mib_pdu.pdu, 
-                                (dl_info->rx_ind->rx_indication_body+i)->mib_pdu.additional_bits, 
-                                (dl_info->rx_ind->rx_indication_body+i)->mib_pdu.ssb_index, 
-                                (dl_info->rx_ind->rx_indication_body+i)->mib_pdu.ssb_length,
-                                (dl_info->rx_ind->rx_indication_body+i)->mib_pdu.cell_id )) << FAPI_NR_RX_PDU_TYPE_MIB;
-                    break;
-                case FAPI_NR_RX_PDU_TYPE_SIB:
-                    ret_mask |= (handle_bcch_dlsch(dl_info->module_id, dl_info->cc_id, dl_info->gNB_index,
-                                (dl_info->rx_ind->rx_indication_body+i)->sib_pdu.sibs_mask,
-                                (dl_info->rx_ind->rx_indication_body+i)->sib_pdu.pdu,
-                                (dl_info->rx_ind->rx_indication_body+i)->sib_pdu.pdu_length )) << FAPI_NR_RX_PDU_TYPE_SIB;
-                    break;
-                case FAPI_NR_RX_PDU_TYPE_DLSCH:
-                    ret_mask |= (0) << FAPI_NR_RX_PDU_TYPE_DLSCH;
-                    break;
-                default:
-
-                    break;
-
-            }
-        }
-    }
-
-    
 
     if(dl_info->dci_ind != NULL){
         printf("[L2][IF MODULE][DL INDICATION][DCI_IND]\n");
@@ -208,6 +190,40 @@ int8_t nr_ue_dl_indication(nr_downlink_indication_t *dl_info){
         }
     }
 
+    if(dl_info->rx_ind != NULL){
+        printf("[L2][IF MODULE][DL INDICATION][RX_IND]\n");
+        for(i=0; i<dl_info->rx_ind->number_pdus; ++i){
+            switch(dl_info->rx_ind->rx_indication_body[i].pdu_type){
+                case FAPI_NR_RX_PDU_TYPE_MIB:
+                    ret_mask |= (handle_bcch_bch(dl_info->module_id, dl_info->cc_id, dl_info->gNB_index,
+                                (dl_info->rx_ind->rx_indication_body+i)->mib_pdu.pdu,
+                                (dl_info->rx_ind->rx_indication_body+i)->mib_pdu.additional_bits,
+                                (dl_info->rx_ind->rx_indication_body+i)->mib_pdu.ssb_index,
+                                (dl_info->rx_ind->rx_indication_body+i)->mib_pdu.ssb_length,
+                                (dl_info->rx_ind->rx_indication_body+i)->mib_pdu.cell_id )) << FAPI_NR_RX_PDU_TYPE_MIB;
+                    break;
+                case FAPI_NR_RX_PDU_TYPE_SIB:
+                    ret_mask |= (handle_bcch_dlsch(dl_info->module_id, dl_info->cc_id, dl_info->gNB_index,
+                                (dl_info->rx_ind->rx_indication_body+i)->sib_pdu.sibs_mask,
+                                (dl_info->rx_ind->rx_indication_body+i)->sib_pdu.pdu,
+                                (dl_info->rx_ind->rx_indication_body+i)->sib_pdu.pdu_length )) << FAPI_NR_RX_PDU_TYPE_SIB;
+                    break;
+                case FAPI_NR_RX_PDU_TYPE_DLSCH:
+//                    ret_mask |= (0) << FAPI_NR_RX_PDU_TYPE_DLSCH;
+                    ret_mask |= (handle_dlsch(dl_info->module_id, dl_info->cc_id, dl_info->gNB_index, &dl_info->dci_ind,
+                                (dl_info->rx_ind->rx_indication_body+i)->pdsch_pdu.pdu,
+                                (dl_info->rx_ind->rx_indication_body+i)->pdsch_pdu.pdu_length)) << FAPI_NR_RX_PDU_TYPE_DLSCH;
+
+                    break;
+                default:
+
+                    break;
+
+            }
+        }
+    }
+
+
     AssertFatal( nr_ue_if_module_inst[module_id] != NULL, "IF module is void!\n" );
     nr_ue_if_module_inst[module_id]->scheduled_response(&mac->scheduled_response);
 

targets/ARCH/ADRV9371_ZC706/Makefile

-#			Creates shared library
-
-CC=			gcc
-CFLAGS+=	-DADRV9371_ZC706 -DHWLAT -O0 -g3 -Wall -fmessage-length=0 -fPIC
-
-DROOT=		./USERSPACE
-DIR=		$(DROOT)/LIB
-
-IFLAGS+=	-I$(DIR)/								\
-			-I$(DROOT)/libini/						\
-			-I../COMMON/							\
-			-I/usr/include/
-
-LDFLAGS+=	-L/usr/lib/x86/64-linux-gnu/			\
-			-lm -liio -ldl -lriffa
-
-OUTDIR=		./slib
-TARGET=		libadrv9371_zc706.so
-
-SRC=		$(DIR)/adrv9371_dump.c					\
-			$(DIR)/adrv9371_helper.c				\
-			$(DIR)/adrv9371_self_test.c				\
-			$(DIR)/adrv9371_zc706_lib.c				\
-			$(DIR)/adrv9371_zc706_riffa_lib.c		\
-			$(DIR)/adrv9371_zc706_stats.c			\
-			$(DIR)/hw_init.c			\
-			$(DROOT)/libini/libini.c
-
-OBJ=		$(OUTDIR)/adrv9371_dump.o				\
-			$(OUTDIR)/adrv9371_helper.o				\
-			$(OUTDIR)/adrv9371_self_test.o			\
-			$(OUTDIR)/adrv9371_zc706_lib.o			\
-			$(OUTDIR)/adrv9371_zc706_riffa_lib.o	\
-			$(OUTDIR)/adrv9371_zc706_stats.o		\
-			$(OUTDIR)/hw_init.o		\
-			$(OUTDIR)/libini.o
-
-all:	lib
-
-dir:
-	mkdir -p $(OUTDIR)
-
-env:
-	set PATH=/usr/lib/:${PATH}
-
-obj:	dir env
-	$(CC) -c $(CFLAGS) $(IFLAGS) $(SRC) 
-	mv *.o $(OUTDIR)
-
-lib:	dir obj
-	$(CC) -shared $(OBJ) -o $(OUTDIR)/$(TARGET) $(LDFLAGS)
-
-# exec: 	env
-#	$(CC) $(CFLAGS) $(IFLAGS) main.c $(SRC) -o lib.exe $(LDFLAGS) -lpthread
-
-.PHONY:	clean
-
-clean:	
-	rm -f $(OUTDIR)/*.o $(OUTDIR)/*~
-
-rm:		clean
-	rm -f $(OUTDIR)/$(TARGET)
-	rmdir $(OUTDIR)
\ No newline at end of file

targets/ARCH/ADRV9371_ZC706/SYRTEM_IQ_QuickStart.readme

+/* ********** ********** ********** ********** ********** ********** ********** */
+Requirements:
+-------------
+- Previous kernel module/libraries shall be uninstalled !!!
+  - cf. command line below "SYRTEM_IQ_uninstall_previous_SW.sh"
+./SYRTEM_IQ_unload_previous_SW.sh
+- You shall have SYRIQ1.4.6nr.tar.gz
+- Ubuntu kernel version is restricted to:
+  - Kernel 4.15.0-20-lowlatency (Ubuntu 18.04)
+  - Kernel 4.10.0-42-lowlatency (Ubuntu 17.04)
+  - Kernel 3.19.0-61-lowlatency (Ubuntu 14.04)
+- ADRV9371+ZC706 PCIe board shall be switched on
+- PC shall be reboot once ADRV9371+ZC706 PCIe board is switched on
+
+mkdir eur_oai_develop-nr
+cd eur_oai_develop-nr
+
+git clone https://gitlab.eurecom.fr/oai/openairinterface5g.git
+cd openairinterface5g
+
+git checkout 375-syrtem-sdr-platform
+or
+git checkout develop-nr (after merge request accepted)
+
+./targets/ARCH/ADRV9371_ZC706/SYRTEM_IQ_uninstall_previous_SW.sh
+-> Reading package lists... Done
+-> Building dependency tree       
+-> Reading state information... Done
+-> linux-headers-4.15.0-20-lowlatency is already the newest version (4.15.0-20.21).
+-> 0 upgraded, 0 newly installed, 0 to remove and 327 not upgraded.
+-> Previous SYRIQ is loaded!
+    -> previous SYRIQ is unloaded!
+    -> previous SYRIQ is uninstall!
+-> Previous SYRIQ uninstallation is done
+
+
+
+
+/* ********** ********** ********** ********** ********** ********** ********** */
+UE:
+---
+configuration:
+--------------
+sudo apt update
+sudo apt-get update
+
+tar -xvzf SYRIQ1.4.6nr.tar.gz
+./SYRIQplatformR1.4.6nr_install.sh
+sudo reboot
+
+sudo lspci -vv | grep Xilinx
+sudo lspci -vv -s 02:00.0 | grep LnkSta
+sudo lspci -vv -s 03:00.0 | grep LnkSta
+sudo lspci -vv -s 02:00.0 | grep Interr
+sudo lspci -vv -s 03:00.0 | grep Interr
+
+sudo gedit /usr/local/etc/syriq/cpu-irq.sh
+echo '1' > /proc/irq/49/smp_affinity_list
+echo '5' > /proc/irq/48/smp_affinity_list
+
+gedit oaienv
+export IIOD_REMOTE=192.168.1.11
+
+
+
+compilation:
+------------
+sudo cset shield --reset
+cd eur_oai_develop-nr/openairinterface5g/
+source oaienv
+
+sudo -E ./cmake_targets/build_oai -c --nrUE -w ADRV9371_ZC706 -I
+sudo -E ./cmake_targets/build_oai -c --nrUE -w ADRV9371_ZC706
+
+
+
+run:
+----
+source oaienv
+sudo -E /usr/local/etc/syriq/cpu-irq.sh
+
+sudo -E cset shield -e ./targets/bin/nr-uesoftmodem.Rel15 -- --numerology 1 -r 106 -C 3510000000 --loop-memory --rf-config-file /usr/local/etc/syriq/ue.band22.tm1.PRB100.NR40.dat
+
+
+
+
+
+/* ********** ********** ********** ********** ********** ********** ********** */
+gNB:
+----
+configuration:
+--------------
+sudo apt update
+sudo apt-get update
+
+tar -xvzf SYRIQ1.4.6nr.tar.gz
+./SYRIQplatformR1.4.6nr_install.sh
+sudo reboot
+
+sudo lspci -vv | grep Xilinx
+sudo lspci -vv -s 02:00.0 | grep LnkSta
+sudo lspci -vv -s 02:00.0 | grep Interr
+
+sudo gedit /usr/local/etc/syriq/cpu-irq.sh
+echo '1' > /proc/irq/46/smp_affinity_list
+
+gedit oaienv
+export IIOD_REMOTE=192.168.1.21
+
+
+
+compilation:
+------------
+sudo cset shield --reset
+cd eur_oai_develop-nr/openairinterface5g/
+source oaienv
+
+sudo -E ./cmake_targets/build_oai -c --gNB -w ADRV9371_ZC706 -I
+sudo -E ./cmake_targets/build_oai -c --gNB -w ADRV9371_ZC706
+
+
+
+run:
+----
+source oaienv
+sudo -E /usr/local/etc/syriq/cpu-irq.sh
+
+sudo -E cset shield -e ./targets/bin/nr-softmodem.Rel15 -- -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band22.tm1.106PRB.adrv9371zc706.conf --rf-config-file /usr/local/etc/syriq/gnb.band22.tm1.PRB100.NR40_hwgain15.dat

targets/ARCH/ADRV9371_ZC706/SYRTEM_IQ_uninstall_previous_SW.sh

+# Previous SYRIQ uninstall
+#!/bin/sh
+MODULE="riffa"
+KERNEL_VERSION=$(uname -r)
+RHR=/etc/redhat-release
+
+sudo apt-get install -y --allow-unauthenticated linux-headers-`uname -r`
+
+if lsmod | grep "$MODULE" &> /dev/null ; then
+	echo "Previous SYRIQ is loaded!"
+	sudo rmmod $MODULE
+	echo " -> previous SYRIQ is unloaded!"
+	sudo rm -f /usr/local/lib/libriffa.so*
+	sudo rm -f /usr/local/include/riffa.h
+	sudo rm -f /usr/local/include/riffa_driver.h
+	sudo rm -f /etc/ld.so.conf.d/riffa.conf
+	sudo rm -rf /lib/modules/$KERNEL_VERSION/kernel/drivers/riffa
+	sudo rm -f /etc/udev/rules.d/99-riffa.rules
+	sudo sed -i '/riffa/d' /etc/modules
+	sudo ldconfig
+	sudo depmod
+	echo " -> previous SYRIQ is uninstall!"
+	echo "Previous SYRIQ uninstallation is done"
+	exit 0
+else
+	echo "Previous SYRIQ is not loaded!"
+	exit 1
+fi

targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/ADRV9371-W_test.ini

-[IIO Oscilloscope]
-plugin.DMM.detached=0
-plugin.Debug.detached=0
-plugin.AD9371 Advanced.detached=0
-plugin.AD9371.detached=0
-startup_version_check=0
-test=1
-
-[IIO Oscilloscope - Capture Window1]
-fru_connect = 1
-test.message = Please ensure:\n • 30.72 MHz -> REF_CLK_IN (0dBm)\n • Rx1 <-> Tx1\n • Rx2 <-> Tx2
-domain=fft
-sample_count=400
-fft_size=16384
-fft_avg=8
-fft_pwr_offset=0.000000
-graph_type=Lines
-show_grid=1
-enable_auto_scale=1
-x_axis_min=-67.583626
-x_axis_max=67.576126
-y_axis_min=-130
-y_axis_max=3
-show_capture_options = 1
-
-axi-ad9371-rx-obs-hpc.expanded=1
-axi-ad9371-rx-obs-hpc.active=0
-axi-ad9371-rx-obs-hpc.trigger_enabled=0
-axi-ad9371-rx-obs-hpc.voltage0_i.enabled=0
-axi-ad9371-rx-obs-hpc.voltage0_q.enabled=0
-
-axi-ad9371-rx-hpc.expanded=1
-axi-ad9371-rx-hpc.active=1
-axi-ad9371-rx-hpc.voltage0_i.enabled=1
-axi-ad9371-rx-hpc.voltage0_q.enabled=1
-axi-ad9371-rx-hpc.voltage1_i.enabled=0
-axi-ad9371-rx-hpc.voltage1_q.enabled=0
-
-marker_type = Single Tone Markers
-marker.0 = 9525
-marker.1 = 8192
-marker.2 = 10859
-marker.3 = 12193
-marker.4 = 13526
-marker.5 = 14859
-capture_started=0
-
-[DMM]
-device_list = ad7291 0
-device_list = ad9371-phy 0
-device_list = xadc 0
-running = No
-
-# temp between 20C and 55C (in 0.25C units)
-test.ad7291.in_temp0_raw.int = 80 220
-
-# See the production testing wiki docs [1] for how these values are calculated.
-# [1]: (https://wiki.analog.com/resources/eval/user-guides/ad-fmcomms2-ebz/testing#voltage)
-
-# scale = 0.610351562
-# All nominal voltages +/- 2.5%
-
-# 0 INPUT_VOLTAGE 12V - V(Drop Diode) 56/10
-test.ad7291.in_voltage0_raw.int = 2710 2850
-
-# 1 VOUT2_1V3_DIG 1
-test.ad7291.in_voltage1_raw.int = 2077 2183
-
-# 2 VDD_IF 10/10
-test.ad7291.in_voltage2_raw.int = 1997 2099
-
-# 3 VOUT3_3V3 10/10
-test.ad7291.in_voltage3_raw.int = 2636 2770
-
-# 5 VOUT4_1V8  1
-test.ad7291.in_voltage5_raw.int = 2875 3023
-
-# 7 VOUT1_1V3_ANLG 1
-test.ad7291.in_voltage7_raw.int = 2077 2183
-
-
-# Test AD9528 lock status - Requires 30.720 MHz reference clock!
-test.ad9528-1.pll1_reference_clk_a_present.int = 1 1
-test.ad9528-1.pll1_locked.int = 1 1
-test.ad9528-1.pll2_locked.int = 1 1
-
-
-[AD9371]
-ad9371-phy.in_voltage2_rf_port_select = INTERNALCALS
-ad9371-phy.in_voltage2_temp_comp_gain = 0.00 dB
-ad9371-phy.out_altvoltage1_TX_LO_frequency = 2500000000
-ad9371-phy.out_altvoltage2_RX_SN_LO_frequency = 2600000000
-ad9371-phy.out_voltage1_hardwaregain = -10.000000 dB
-ad9371-phy.out_voltage1_lo_leakage_tracking_en = 1
-ad9371-phy.out_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage0_gain_control_mode = automatic
-ad9371-phy.in_voltage0_quadrature_tracking_en = 1
-ad9371-phy.in_voltage0_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage1_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage1_gain_control_mode = automatic
-ad9371-phy.out_altvoltage0_RX_LO_frequency = 2600000000
-ad9371-phy.out_voltage0_lo_leakage_tracking_en = 1
-ad9371-phy.out_voltage0_hardwaregain = -10.000000 dB
-ad9371-phy.out_voltage0_quadrature_tracking_en = 1
-ad9371-phy.ensm_mode = radio_on
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_frequency = 10001402
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_frequency = 1001265
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_frequency = 10001402
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_frequency = 10001402
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_frequency = 40001860
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_frequency = 1001265
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_frequency = 10001402
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_frequency = 40001860
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_scale = 0.000000
-dds_mode_tx1 = 0
-dds_mode_tx2 = 0
-SYNC_RELOAD = 1
-
-# test receiver at 1GHz to 5 GHz
-# SEQ FIRST INCREMENT LAST
-<SEQ> i 1000000000 5000000000 5000000000
-
-[IIO Oscilloscope - Capture Window1]
-# wait for device to settle
-marker_type = Peak Markers
-capture_started = 0
-cycle = 1000
-axi-ad9371-rx-hpc.voltage0_i.enabled=1
-axi-ad9371-rx-hpc.voltage0_q.enabled=1
-axi-ad9371-rx-hpc.voltage1_i.enabled=0
-axi-ad9371-rx-hpc.voltage1_q.enabled=0
-cycle = 1000
-
-[AD9371]
-ad9371-phy.out_altvoltage1_TX_LO_frequency = <i>
-ad9371-phy.out_altvoltage2_RX_SN_LO_frequency = {{<i>} + {100000000}}
-ad9371-phy.out_altvoltage0_RX_LO_frequency = {{<i>} + {100000000}}
-dds_mode_tx1 = 0
-dds_mode_tx2 = 0
-SYNC_RELOAD = 1
-
-[IIO Oscilloscope - Capture Window1]
-# wait for device to settle
-capture_started = 1
-cycle = 3000
-
-[AD9371]
-# channels should be off, so RSSI should be low
-test.ad9371-phy.in_voltage0_rssi.int = 44 45
-test.ad9371-phy.in_voltage1_rssi.int = 44 45
-
-# and gain is high
-test.ad9371-phy.in_voltage0_hardwaregain.double = 30.0 31.0
-test.ad9371-phy.in_voltage0_hardwaregain.double = 30.0 31.0
-
-# set Tx and Rx to be the same
-ad9371-phy.out_altvoltage0_RX_LO_frequency = <i>
-dds_mode_tx1 = 1
-dds_mode_tx2 = 1
-SYNC_RELOAD = 1
-
-[IIO Oscilloscope - Capture Window1]
-# wait for device to settle
-marker_type = Single Tone Markers
-cycle = 3000
-
-[AD9371]
-
-ad9371-phy.out_voltage0_hardwaregain = 0.000000 dB
-ad9371-phy.out_voltage1_hardwaregain = 0.000000 dB
-
-# channels should be on, so RSSI should be high
-test.ad9371-phy.in_voltage0_rssi.int = 3 12
-test.ad9371-phy.in_voltage1_rssi.int = 3 12
-
-# and gain is low
-test.ad9371-phy.in_voltage0_hardwaregain.double = 15.0 29.0
-test.ad9371-phy.in_voltage0_hardwaregain.double = 15.0 29.0
-
-
-
-[IIO Oscilloscope - Capture Window1]
-cycle = 1000
-capture_started = 1
-cycle = 3000
-save_png = ADRV9371_rx1_<i>.png
-save_markers = markers.log
-
-#look at the markers - Fundamental
-test.marker.0 = -12.0 -4.0
-# DC
-test.marker.1 = -100.0 -60.0
-# 2st Harmonic
-test.marker.2 = -110.0 -75.0
-# 3nd Harmonic
-test.marker.3 = -110.0 -75.0
-# 4th Harmonic
-test.marker.4 = -110.0 -75.0
-# 4th Harmonic
-test.marker.5 = -110.0 -65.0
-
-capture_started = 0
-cycle = 1000
-
-axi-ad9371-rx-hpc.voltage0_i.enabled=0
-axi-ad9371-rx-hpc.voltage0_q.enabled=0
-axi-ad9371-rx-hpc.voltage1_i.enabled=1
-axi-ad9371-rx-hpc.voltage1_q.enabled=1
-
-cycle = 1000
-capture_started = 1
-cycle = 3000
-save_png = ADRV9371_rx2_<i>.png
-save_markers = markers.log
-
-#look at the markers - Fundamental
-test.marker.0 = -12.0 -4.0
-# DC
-test.marker.1 = -100.0 -60.0
-# 2st Harmonic
-test.marker.2 = -110.0 -75.0
-# 3nd Harmonic
-test.marker.3 = -110.0 -75.0
-# 4th Harmonic
-test.marker.4 = -110.0 -75.0
-# 4th Harmonic
-test.marker.5 = -110.0 -65.0
-
-</SEQ>
-
-[IIO Oscilloscope - Capture Window1]
-capture_started = 0
-test.message = Please ensure:\n • ORX1 <-> Tx1\n • ORX22 <-> Tx2
-
-axi-ad9371-rx-hpc.expanded=1
-axi-ad9371-rx-hpc.active=0
-axi-ad9371-rx-hpc.voltage0_i.enabled=0
-axi-ad9371-rx-hpc.voltage0_q.enabled=0
-axi-ad9371-rx-hpc.voltage1_i.enabled=0
-axi-ad9371-rx-hpc.voltage1_q.enabled=0
-
-axi-ad9371-rx-obs-hpc.expanded=1
-axi-ad9371-rx-obs-hpc.active=1
-axi-ad9371-rx-obs-hpc.voltage0_i.enabled=1
-axi-ad9371-rx-obs-hpc.voltage0_q.enabled=1
-cycle = 1000
-
-# test observer path at 1GHz to 5 GHz
-# SEQ FIRST INCREMENT LAST
-<SEQ> i 1000000000 1000000000 5000000000
-
-[AD9371]
-# set Tx and Rx to be the same
-ad9371-phy.out_altvoltage1_TX_LO_frequency = <i>
-ad9371-phy.out_altvoltage2_RX_SN_LO_frequency = {{<i>} + {1000000}}
-ad9371-phy.out_altvoltage0_RX_LO_frequency = <i>
-dds_mode_tx1 = 1
-dds_mode_tx2 = 1
-ad9371-phy.out_voltage0_hardwaregain = -10.000000 dB
-ad9371-phy.out_voltage1_hardwaregain = -10.000000 dB
-ad9371-phy.in_voltage2_rf_port_select = ORX1_TX_LO
-ad9371-phy.in_voltage2_gain_control_mode = manual
-ad9371-phy.in_voltage2_hardwaregain = 18.000000 dB
-
-[IIO Oscilloscope - Capture Window1]
-capture_started = 1
-cycle = 3000
-save_png = ADRV9371_ob1_<i>.png
-save_markers = markers.log
-
-#look at the markers - Fundamental
-test.marker.0 = -15.0 -5.0
-# DC
-test.marker.1 = -100.0 -75.0
-# 2st Harmonic
-test.marker.2 = -110.0 -75.0
-# 3nd Harmonic
-test.marker.3 = -110.0 -75.0
-# 4th Harmonic
-test.marker.4 = -110.0 -75.0
-# 4th Harmonic
-test.marker.5 = -110.0 -65.0
-
-[AD9371]
-
-ad9371-phy.in_voltage2_rf_port_select = ORX2_TX_LO
-
-
-[IIO Oscilloscope - Capture Window1]
-cycle = 1000
-capture_started = 1
-cycle = 3000
-save_png = ADRV9371_ob2_<i>.png
-save_markers = markers.log
-
-#look at the markers - Fundamental
-test.marker.0 = -15.0 -4.0
-# DC
-test.marker.1 = -100.0 -75.0
-# 2st Harmonic
-test.marker.2 = -110.0 -75.0
-# 3nd Harmonic
-test.marker.3 = -110.0 -75.0
-# 4th Harmonic
-test.marker.4 = -110.0 -75.0
-# 4th Harmonic
-test.marker.5 = -110.0 -65.0
-
-</SEQ>
-
-[IIO Oscilloscope - Capture Window1]
-test.message = All tests passed - Ship it
-quit = 1

targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/gnb.band7.tm1.PRB100.NR40.adrv9371-zc706_HWgain15dB.ini

-[AD9371]
-ad9371-phy.in_voltage2_rf_port_select = OFF
-ad9371-phy.in_voltage2_hardwaregain = -156.000000 dB
-ad9371-phy.in_voltage2_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_voltage0_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage0_hardwaregain = 0.000000 dB
-ad9371-phy.out_voltage0_quadrature_tracking_en = 1
-ad9371-phy.out_voltage1_hardwaregain = 0.000000 dB
-ad9371-phy.out_voltage1_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage1_TX_LO_frequency = 2680000000
-ad9371-phy.out_altvoltage2_RX_SN_LO_frequency = 2560000000
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage0_gain_control_mode = manual
-ad9371-phy.in_voltage0_quadrature_tracking_en = 1
-ad9371-phy.in_voltage0_hardwaregain = 15.000000 dB
-ad9371-phy.in_voltage0_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage1_hardwaregain = 15.000000 dB
-ad9371-phy.in_voltage1_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage1_gain_control_mode = manual
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage0_RX_LO_frequency = 2560000000
-ad9371-phy.calibrate_rx_qec_en = 0
-ad9371-phy.calibrate_tx_lol_en = 0
-ad9371-phy.calibrate_vswr_en = 0
-ad9371-phy.calibrate_tx_qec_en = 0
-ad9371-phy.calibrate_clgc_en = 0
-ad9371-phy.ensm_mode = radio_on
-ad9371-phy.calibrate_tx_lol_ext_en = 0
-ad9371-phy.calibrate_dpd_en = 0
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_scale = 0.000000
-load_myk_profile_file = /targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/profileNR40MHz.txt
-dds_mode_tx1 = 1
-dds_mode_tx2 = 1
-dac_buf_filename = /usr/local/lib/osc/waveforms/LTE20.mat
-tx_channel_0 = 1
-tx_channel_1 = 1
-tx_channel_2 = 0
-tx_channel_3 = 0
-global_settings_show = 1
-tx_show = 1
-rx_show = 1
-obs_show = 1
-fpga_show = 1
-
-[ADRV9371_ZC706]
-# NO_DEBUG=0; DEBUG=1
-debug_mode = 0
-# 20MHz 40MHz 80MHz=1; 10MHz=2; 5MHz=4
-interpolation_decimation_factor = 1
-# is taken into account only if "ad9371-phy.in_voltage0_gain_control_mode = manual"
-rx_gain_offset = 46

targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/gnb.band7.tm1.PRB100.NR80.adrv9371-zc706_HWgain15dB.ini

-[AD9371]
-ad9371-phy.in_voltage2_rf_port_select = OFF
-ad9371-phy.in_voltage2_hardwaregain = -156.000000 dB
-ad9371-phy.in_voltage2_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_voltage0_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage0_hardwaregain = 0.000000 dB
-ad9371-phy.out_voltage0_quadrature_tracking_en = 1
-ad9371-phy.out_voltage1_hardwaregain = 0.000000 dB
-ad9371-phy.out_voltage1_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage1_TX_LO_frequency = 2680000000
-ad9371-phy.out_altvoltage2_RX_SN_LO_frequency = 2560000000
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage0_gain_control_mode = manual
-ad9371-phy.in_voltage0_quadrature_tracking_en = 1
-ad9371-phy.in_voltage0_hardwaregain = 15.000000 dB
-ad9371-phy.in_voltage0_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage1_hardwaregain = 15.000000 dB
-ad9371-phy.in_voltage1_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage1_gain_control_mode = manual
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage0_RX_LO_frequency = 2560000000
-ad9371-phy.calibrate_rx_qec_en = 0
-ad9371-phy.calibrate_tx_lol_en = 0
-ad9371-phy.calibrate_vswr_en = 0
-ad9371-phy.calibrate_tx_qec_en = 0
-ad9371-phy.calibrate_clgc_en = 0
-ad9371-phy.ensm_mode = radio_on
-ad9371-phy.calibrate_tx_lol_ext_en = 0
-ad9371-phy.calibrate_dpd_en = 0
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_scale = 0.000000
-load_myk_profile_file = /targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/profileNR80MHz.txt
-dds_mode_tx1 = 1
-dds_mode_tx2 = 1
-dac_buf_filename = /usr/local/lib/osc/waveforms/LTE20.mat
-tx_channel_0 = 1
-tx_channel_1 = 1
-tx_channel_2 = 0
-tx_channel_3 = 0
-global_settings_show = 1
-tx_show = 1
-rx_show = 1
-obs_show = 1
-fpga_show = 1
-
-[ADRV9371_ZC706]
-# NO_DEBUG=0; DEBUG=1
-debug_mode = 0
-# 20MHz 40MHz 80MHz=1; 10MHz=2; 5MHz=4
-interpolation_decimation_factor = 1
-# is taken into account only if "ad9371-phy.in_voltage0_gain_control_mode = manual"
-rx_gain_offset = 46

targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/gnb.band7.tm1.PRB100.adrv9371-zc706_HWgain15dB.ini

-[AD9371]
-ad9371-phy.in_voltage2_rf_port_select = OFF
-ad9371-phy.in_voltage2_hardwaregain = -156.000000 dB
-ad9371-phy.in_voltage2_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_voltage0_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage0_hardwaregain = 0.000000 dB
-ad9371-phy.out_voltage0_quadrature_tracking_en = 1
-ad9371-phy.out_voltage1_hardwaregain = 0.000000 dB
-ad9371-phy.out_voltage1_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage1_TX_LO_frequency = 2680000000
-ad9371-phy.out_altvoltage2_RX_SN_LO_frequency = 2560000000
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage0_gain_control_mode = manual
-ad9371-phy.in_voltage0_quadrature_tracking_en = 1
-ad9371-phy.in_voltage0_hardwaregain = 15.000000 dB
-ad9371-phy.in_voltage0_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage1_hardwaregain = 15.000000 dB
-ad9371-phy.in_voltage1_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage1_gain_control_mode = manual
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage0_RX_LO_frequency = 2560000000
-ad9371-phy.calibrate_rx_qec_en = 0
-ad9371-phy.calibrate_tx_lol_en = 0
-ad9371-phy.calibrate_vswr_en = 0
-ad9371-phy.calibrate_tx_qec_en = 0
-ad9371-phy.calibrate_clgc_en = 0
-ad9371-phy.ensm_mode = radio_on
-ad9371-phy.calibrate_tx_lol_ext_en = 0
-ad9371-phy.calibrate_dpd_en = 0
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_scale = 0.000000
-load_myk_profile_file = ./targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/profile20MHz.txt
-dds_mode_tx1 = 1
-dds_mode_tx2 = 1
-dac_buf_filename = /usr/local/lib/osc/waveforms/LTE20.mat
-tx_channel_0 = 1
-tx_channel_1 = 1
-tx_channel_2 = 0
-tx_channel_3 = 0
-global_settings_show = 1
-tx_show = 1
-rx_show = 1
-obs_show = 1
-fpga_show = 1
-
-[ADRV9371_ZC706]
-# NO_DEBUG=0; DEBUG=1
-debug_mode = 0
-# 20MHz 40MHz 80MHz=1; 10MHz=2; 5MHz=4
-interpolation_decimation_factor = 1
-# is taken into account only if "ad9371-phy.in_voltage0_gain_control_mode = manual"
-rx_gain_offset = 46

targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/profile1-osc.ini

-[AD9371]
-ad9371-phy.in_voltage2_rf_port_select = OFF
-ad9371-phy.in_voltage2_hardwaregain = -156.000000 dB
-ad9371-phy.in_voltage2_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_voltage0_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage0_hardwaregain = -10.000000 dB
-ad9371-phy.out_voltage0_quadrature_tracking_en = 1
-ad9371-phy.out_voltage1_hardwaregain = -10.000000 dB
-ad9371-phy.out_voltage1_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage1_TX_LO_frequency = 2685000000
-ad9371-phy.out_altvoltage2_RX_SN_LO_frequency = 2565000000
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage0_gain_control_mode = automatic
-ad9371-phy.in_voltage0_quadrature_tracking_en = 1
-ad9371-phy.in_voltage0_hardwaregain = 30.000000 dB
-ad9371-phy.in_voltage0_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage1_hardwaregain = 30.000000 dB
-ad9371-phy.in_voltage1_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage1_gain_control_mode = automatic
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage0_RX_LO_frequency = 2565000000
-ad9371-phy.calibrate_rx_qec_en = 0
-ad9371-phy.calibrate_tx_lol_en = 0
-ad9371-phy.calibrate_vswr_en = 0
-ad9371-phy.calibrate_tx_qec_en = 0
-ad9371-phy.calibrate_clgc_en = 0
-ad9371-phy.ensm_mode = radio_on
-ad9371-phy.calibrate_tx_lol_ext_en = 0
-ad9371-phy.calibrate_dpd_en = 0
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_scale = 0.000000
-load_myk_profile_file = /targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/profile_rx30_Tx60_syr.txt
-dds_mode_tx1 = 1
-dds_mode_tx2 = 1
-dac_buf_filename = /usr/local/lib/osc/waveforms/LTE20.mat
-tx_channel_0 = 1
-tx_channel_1 = 1
-tx_channel_2 = 0
-tx_channel_3 = 0
-global_settings_show = 1
-tx_show = 1
-rx_show = 1
-obs_show = 1
-fpga_show = 1
-
-[ADRV9371_ZC706]
-debug_mode = 0
-interpolation_decimation_factor = 2

targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/profile20MHz.txt

-<profile AD9371 version=0 name=Rx 20, IQrate 30.720>
- <clocks>
-  <deviceClock_kHz=122880>
-  <clkPllVcoFreq_kHz=9830400>
-  <clkPllVcoDiv=2>
-  <clkPllHsDiv=4>
- </clocks>
-
- <rx>
-  <adcDiv=1>
-  <rxFirDecimation=4>
-  <rxDec5Decimation=5>
-  <enHighRejDec5=1>
-  <rhb1Decimation=2>
-  <iqRate_kHz=30720>
-  <rfBandwidth_Hz=20000000>
-  <rxBbf3dBCorner_kHz=20000>
-
-  <filter FIR gain=-6 num=72>
-  0
-  2
-  4
-  3
-  -4
-  -14
-  -21
-  -12
-  17
-  56
-  73
-  39
-  -53
-  -159
-  -198
-  -101
-  129
-  377
-  457
-  229
-  -274
-  -793
-  -951
-  -482
-  527
-  1564
-  1899
-  1011
-  -978
-  -3154
-  -4109
-  -2611
-  1669
-  7795
-  13807
-  17524
-  17524
-  13807
-  7795
-  1669
-  -2611
-  -4109
-  -3154
-  -978
-  1011
-  1899
-  1564
-  527
-  -482
-  -951
-  -793
-  -274
-  229
-  457
-  377
-  129
-  -101
-  -198
-  -159
-  -53
-  39
-  73
-  56
-  17
-  -12
-  -21
-  -14
-  -4
-  3
-  4
-  2
-  0
-  </filter>
-
-  <adc-profile num=16>
-  599
-  357
-  201
-  98
-  1280
-  112
-  1505
-  53
-  1331
-  21
-  820
-  40
-  48
-  40
-  23
-  191
-  </adc-profile>
- </rx>
-
- <obs>
-  <adcDiv=1>
-  <rxFirDecimation=2>
-  <rxDec5Decimation=5>
-  <enHighRejDec5=1>
-  <rhb1Decimation=2>
-  <iqRate_kHz=61440>
-  <rfBandwidth_Hz=50000000>
-  <rxBbf3dBCorner_kHz=25000>
-
-  <filter FIR gain=0 num=72>
-  0
-  -1
-  1
-  2
-  -2
-  -6
-  6
-  12
-  -13
-  -24
-  25
-  43
-  -45
-  -73
-  77
-  118
-  -124
-  -183
-  193
-  274
-  -289
-  -402
-  423
-  579
-  -607
-  -826
-  866
-  1187
-  -1244
-  -1759
-  1842
-  2818
-  -2970
-  -5815
-  4337
-  18436
-  18436
-  4337
-  -5815
-  -2970
-  2818
-  1842
-  -1759
-  -1244
-  1187
-  866
-  -826
-  -607
-  579
-  423
-  -402
-  -289
-  274
-  193
-  -183
-  -124
-  118
-  77
-  -73
-  -45
-  43
-  25
-  -24
-  -13
-  12
-  6
-  -6
-  -2
-  2
-  1
-  -1
-  0
-  </filter>
-
-  <adc-profile num=16>
-  596
-  358
-  201
-  98
-  1280
-  134
-  1509
-  64
-  1329
-  25
-  818
-  39
-  48
-  40
-  23
-  190
-  </adc-profile>
-
-  <lpbk-adc-profile num=16>
-  599
-  357
-  201
-  98
-  1280
-  112
-  1505
-  53
-  1331
-  21
-  820
-  40
-  48
-  40
-  23
-  191
-  </lpbk-adc-profile>
- </obs>
-
- <tx>
-  <dacDiv=2.5>
-  <txFirInterpolation=2>
-  <thb1Interpolation=2>
-  <thb2Interpolation=2>
-  <txInputHbInterpolation=1>
-  <iqRate_kHz=61440>
-  <primarySigBandwidth_Hz=20000000>
-  <rfBandwidth_Hz=50000000>
-  <txDac3dBCorner_kHz=92000>
-  <txBbf3dBCorner_kHz=25000>
-
-  <filter FIR gain=0 num=32>
-  -118
-  -122
-  242
-  240
-  -429
-  -499
-  730
-  900
-  -1154
-  -1615
-  1742
-  2957
-  -2322
-  -5354
-  3885
-  17211
-  17211
-  3885
-  -5354
-  -2322
-  2957
-  1742
-  -1615
-  -1154
-  900
-  730
-  -499
-  -429
-  240
-  242
-  -122
-  -118
-  </filter>
- </tx>
-</profile>

targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/profileNR40MHz.txt

-<profile AD9371 version=0 name=Rx 40, IQrate 61.440>
- <clocks>
-  <deviceClock_kHz=122880>
-  <clkPllVcoFreq_kHz=9830400>
-  <clkPllVcoDiv=2>
-  <clkPllHsDiv=4>
- </clocks>
-
- <rx>
-  <adcDiv=1>
-  <rxFirDecimation=2>
-  <rxDec5Decimation=5>
-  <enHighRejDec5=1>
-  <rhb1Decimation=2>
-  <iqRate_kHz=61440>
-  <rfBandwidth_Hz=40000000>
-  <rxBbf3dBCorner_kHz=40000>
-
-  <filter FIR gain=-6 num=72>
-  2
-  0
-  -6
-  -7
-  8
-  20
-  0
-  -39
-  -31
-  46
-  86
-  -12
-  -149
-  -88
-  168
-  253
-  -73
-  -424
-  -188
-  478
-  596
-  -265
-  -1015
-  -326
-  1184
-  1262
-  -778
-  -2301
-  -506
-  2949
-  2877
-  -2404
-  -6653
-  -1392
-  13380
-  26614
-  26614
-  13380
-  -1392
-  -6653
-  -2404
-  2877
-  2949
-  -506
-  -2301
-  -778
-  1262
-  1184
-  -326
-  -1015
-  -265
-  596
-  478
-  -188
-  -424
-  -73
-  253
-  168
-  -88
-  -149
-  -12
-  86
-  46
-  -31
-  -39
-  0
-  20
-  8
-  -7
-  -6
-  0
-  2
-  </filter>
-
-  <adc-profile num=16>
-  599
-  357
-  201
-  98
-  1280
-  112
-  1505
-  53
-  1331
-  21
-  820
-  40
-  48
-  40
-  23
-  191
-  </adc-profile>
- </rx>
-
- <obs>
-  <adcDiv=1>
-  <rxFirDecimation=2>
-  <rxDec5Decimation=5>
-  <enHighRejDec5=1>
-  <rhb1Decimation=1>
-  <iqRate_kHz=122880>
-  <rfBandwidth_Hz=80000000>
-  <rxBbf3dBCorner_kHz=40000>
-
-  <filter FIR gain=0 num=48>
-  1
-  -1
-  -1
-  5
-  1
-  -15
-  7
-  40
-  -34
-  -94
-  102
-  202
-  -242
-  -400
-  500
-  752
-  -943
-  -1370
-  1711
-  2555
-  -3333
-  -6499
-  4207
-  19532
-  19532
-  4207
-  -6499
-  -3333
-  2555
-  1711
-  -1370
-  -943
-  752
-  500
-  -400
-  -242
-  202
-  102
-  -94
-  -34
-  40
-  7
-  -15
-  1
-  5
-  -1
-  -1
-  1
-  </filter>
-
-  <adc-profile num=16>
-  563
-  372
-  201
-  98
-  1280
-  328
-  1550
-  171
-  1317
-  66
-  804
-  33
-  48
-  39
-  23
-  189
-  </adc-profile>
-
-  <lpbk-adc-profile num=16>
-  599
-  357
-  201
-  98
-  1280
-  112
-  1505
-  53
-  1331
-  21
-  820
-  40
-  48
-  40
-  23
-  191
-  </lpbk-adc-profile>
- </obs>
-
- <tx>
-  <dacDiv=2.5>
-  <txFirInterpolation=1>
-  <thb1Interpolation=2>
-  <thb2Interpolation=2>
-  <txInputHbInterpolation=1>
-  <iqRate_kHz=122880>
-  <primarySigBandwidth_Hz=40000000>
-  <rfBandwidth_Hz=40000000>
-  <txDac3dBCorner_kHz=92000>
-  <txBbf3dBCorner_kHz=20000>
-
-  <filter FIR gain=6 num=16>
-  -5
-  425
-  278
-  34
-  -477
-  -1123
-  -1664
-  21975
-  -1664
-  -1123
-  -477
-  34
-  278
-  425
-  -5
-  0
-  </filter>
- </tx>
-</profile>

targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/profileNR80MHz.txt

-<profile AD9371 version=0 name=Rx 80, IQrate 122.880>
- <clocks>
-  <deviceClock_kHz=122880>
-  <clkPllVcoFreq_kHz=9830400>
-  <clkPllVcoDiv=2>
-  <clkPllHsDiv=4>
- </clocks>
-
- <rx>
-  <adcDiv=1>
-  <rxFirDecimation=2>
-  <rxDec5Decimation=5>
-  <enHighRejDec5=1>
-  <rhb1Decimation=1>
-  <iqRate_kHz=122880>
-  <rfBandwidth_Hz=80000000>
-  <rxBbf3dBCorner_kHz=80000>
-
-  <filter FIR gain=-6 num=48>
-  1
-  -1
-  -1
-  3
-  -2
-  -11
-  17
-  33
-  -64
-  -83
-  175
-  193
-  -399
-  -414
-  801
-  831
-  -1477
-  -1589
-  2632
-  3042
-  -5102
-  -7664
-  9765
-  32678
-  32678
-  9765
-  -7664
-  -5102
-  3042
-  2632
-  -1589
-  -1477
-  831
-  801
-  -414
-  -399
-  193
-  175
-  -83
-  -64
-  33
-  17
-  -11
-  -2
-  3
-  -1
-  -1
-  1
-  </filter>
-
-  <adc-profile num=16>
-  563
-  372
-  201
-  98
-  1280
-  328
-  1550
-  171
-  1317
-  66
-  804
-  33
-  48
-  39
-  23
-  189
-  </adc-profile>
- </rx>
-
- <obs>
-  <adcDiv=1>
-  <rxFirDecimation=1>
-  <rxDec5Decimation=5>
-  <enHighRejDec5=1>
-  <rhb1Decimation=1>
-  <iqRate_kHz=245760>
-  <rfBandwidth_Hz=160000000>
-  <rxBbf3dBCorner_kHz=80000>
-
-  <filter FIR gain=0 num=24>
-  -62
-  147
-  -188
-  22
-  500
-  -1359
-  2233
-  -2368
-  656
-  2432
-  -9845
-  24506
-  24506
-  -9845
-  2432
-  656
-  -2368
-  2233
-  -1359
-  500
-  22
-  -188
-  147
-  -62
-  </filter>
-
-  <adc-profile num=16>
-  491
-  375
-  201
-  98
-  1280
-  514
-  1728
-  570
-  1455
-  443
-  882
-  27
-  48
-  39
-  25
-  205
-  </adc-profile>
-
-  <lpbk-adc-profile num=16>
-  563
-  372
-  201
-  98
-  1280
-  328
-  1550
-  171
-  1317
-  66
-  804
-  33
-  48
-  39
-  23
-  189
-  </lpbk-adc-profile>
- </obs>
-
- <tx>
-  <dacDiv=2.5>
-  <txFirInterpolation=1>
-  <thb1Interpolation=2>
-  <thb2Interpolation=1>
-  <txInputHbInterpolation=1>
-  <iqRate_kHz=245760>
-  <primarySigBandwidth_Hz=80000000>
-  <rfBandwidth_Hz=80000000>
-  <txDac3dBCorner_kHz=92000>
-  <txBbf3dBCorner_kHz=40000>
-
-  <filter FIR gain=6 num=16>
-  -9
-  505
-  324
-  24
-  -598
-  -1381
-  -2036
-  23360
-  -2036
-  -1381
-  -598
-  24
-  324
-  505
-  -9
-  0
-  </filter>
- </tx>
-</profile>

targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/profile_rx30_Tx60_syr.txt

-<profile AD9371 version=0 name=Rx 20, IQrate 30.720>
- <clocks>
-  <deviceClock_kHz=122880>
-  <clkPllVcoFreq_kHz=9830400>
-  <clkPllVcoDiv=2>
-  <clkPllHsDiv=4>
- </clocks>
-
- <rx>
-  <adcDiv=1>
-  <rxFirDecimation=4>
-  <rxDec5Decimation=5>
-  <enHighRejDec5=1>
-  <rhb1Decimation=2>
-  <iqRate_kHz=30720>
-  <rfBandwidth_Hz=20000000>
-  <rxBbf3dBCorner_kHz=20000>
-
-  <filter FIR gain=-6 num=72>
-  0
-  2
-  4
-  3
-  -4
-  -14
-  -21
-  -12
-  17
-  56
-  73
-  39
-  -53
-  -159
-  -198
-  -101
-  129
-  377
-  457
-  229
-  -274
-  -793
-  -951
-  -482
-  527
-  1564
-  1899
-  1011
-  -978
-  -3154
-  -4109
-  -2611
-  1669
-  7795
-  13807
-  17524
-  17524
-  13807
-  7795
-  1669
-  -2611
-  -4109
-  -3154
-  -978
-  1011
-  1899
-  1564
-  527
-  -482
-  -951
-  -793
-  -274
-  229
-  457
-  377
-  129
-  -101
-  -198
-  -159
-  -53
-  39
-  73
-  56
-  17
-  -12
-  -21
-  -14
-  -4
-  3
-  4
-  2
-  0
-  </filter>
-
-  <adc-profile num=16>
-  599
-  357
-  201
-  98
-  1280
-  112
-  1505
-  53
-  1331
-  21
-  820
-  40
-  48
-  40
-  23
-  191
-  </adc-profile>
- </rx>
-
- <obs>
-  <adcDiv=1>
-  <rxFirDecimation=2>
-  <rxDec5Decimation=5>
-  <enHighRejDec5=1>
-  <rhb1Decimation=2>
-  <iqRate_kHz=61440>
-  <rfBandwidth_Hz=50000000>
-  <rxBbf3dBCorner_kHz=25000>
-
-  <filter FIR gain=0 num=72>
-  0
-  -1
-  1
-  2
-  -2
-  -6
-  6
-  12
-  -13
-  -24
-  25
-  43
-  -45
-  -73
-  77
-  118
-  -124
-  -183
-  193
-  274
-  -289
-  -402
-  423
-  579
-  -607
-  -826
-  866
-  1187
-  -1244
-  -1759
-  1842
-  2818
-  -2970
-  -5815
-  4337
-  18436
-  18436
-  4337
-  -5815
-  -2970
-  2818
-  1842
-  -1759
-  -1244
-  1187
-  866
-  -826
-  -607
-  579
-  423
-  -402
-  -289
-  274
-  193
-  -183
-  -124
-  118
-  77
-  -73
-  -45
-  43
-  25
-  -24
-  -13
-  12
-  6
-  -6
-  -2
-  2
-  1
-  -1
-  0
-  </filter>
-
-  <adc-profile num=16>
-  596
-  358
-  201
-  98
-  1280
-  134
-  1509
-  64
-  1329
-  25
-  818
-  39
-  48
-  40
-  23
-  190
-  </adc-profile>
-
-  <lpbk-adc-profile num=16>
-  599
-  357
-  201
-  98
-  1280
-  112
-  1505
-  53
-  1331
-  21
-  820
-  40
-  48
-  40
-  23
-  191
-  </lpbk-adc-profile>
- </obs>
-
- <tx>
-  <dacDiv=2.5>
-  <txFirInterpolation=2>
-  <thb1Interpolation=2>
-  <thb2Interpolation=2>
-  <txInputHbInterpolation=1>
-  <iqRate_kHz=61440>
-  <primarySigBandwidth_Hz=20000000>
-  <rfBandwidth_Hz=50000000>
-  <txDac3dBCorner_kHz=92000>
-  <txBbf3dBCorner_kHz=25000>
-
-  <filter FIR gain=0 num=32>
-  -118
-  -122
-  242
-  240
-  -429
-  -499
-  730
-  900
-  -1154
-  -1615
-  1742
-  2957
-  -2322
-  -5354
-  3885
-  17211
-  17211
-  3885
-  -5354
-  -2322
-  2957
-  1742
-  -1615
-  -1154
-  900
-  730
-  -499
-  -429
-  240
-  242
-  -122
-  -118
-  </filter>
- </tx>
-</profile>

targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/ue.band7.tm1.PRB100.NR40.adrv9371-zc706.ini

-[AD9371]
-ad9371-phy.in_voltage2_rf_port_select = OFF
-ad9371-phy.in_voltage2_hardwaregain = -156.000000 dB
-ad9371-phy.in_voltage2_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_voltage0_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage0_hardwaregain = 0.000000 dB
-ad9371-phy.out_voltage0_quadrature_tracking_en = 1
-ad9371-phy.out_voltage1_hardwaregain = 0.000000 dB
-ad9371-phy.out_voltage1_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage1_TX_LO_frequency = 2560000000
-ad9371-phy.out_altvoltage2_RX_SN_LO_frequency = 2680000000
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage0_gain_control_mode = manual
-ad9371-phy.in_voltage0_quadrature_tracking_en = 1
-ad9371-phy.in_voltage0_hardwaregain = 30.000000 dB
-ad9371-phy.in_voltage0_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage1_hardwaregain = 30.000000 dB
-ad9371-phy.in_voltage1_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage1_gain_control_mode = manual
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage0_RX_LO_frequency = 2680000000
-ad9371-phy.calibrate_rx_qec_en = 0
-ad9371-phy.calibrate_tx_lol_en = 0
-ad9371-phy.calibrate_vswr_en = 0
-ad9371-phy.calibrate_tx_qec_en = 0
-ad9371-phy.calibrate_clgc_en = 0
-ad9371-phy.ensm_mode = radio_on
-ad9371-phy.calibrate_tx_lol_ext_en = 0
-ad9371-phy.calibrate_dpd_en = 0
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_scale = 0.000000
-load_myk_profile_file = /targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/profileNR40MHz.txt
-dds_mode_tx1 = 1
-dds_mode_tx2 = 1
-dac_buf_filename = /usr/local/lib/osc/waveforms/LTE20.mat
-tx_channel_0 = 1
-tx_channel_1 = 1
-tx_channel_2 = 0
-tx_channel_3 = 0
-global_settings_show = 1
-tx_show = 1
-rx_show = 1
-obs_show = 1
-fpga_show = 1
-
-[ADRV9371_ZC706]
-# NO_DEBUG=0; DEBUG=1
-debug_mode = 0
-# 20MHz 40MHz 80MHz=1; 10MHz=2; 5MHz=4
-interpolation_decimation_factor = 1
-# is taken into account only if "ad9371-phy.in_voltage0_gain_control_mode = manual"
-rx_gain_offset = 43

targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/ue.band7.tm1.PRB100.NR80.adrv9371-zc706.ini

-[AD9371]
-ad9371-phy.in_voltage2_rf_port_select = OFF
-ad9371-phy.in_voltage2_hardwaregain = -156.000000 dB
-ad9371-phy.in_voltage2_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_voltage0_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage0_hardwaregain = 0.000000 dB
-ad9371-phy.out_voltage0_quadrature_tracking_en = 1
-ad9371-phy.out_voltage1_hardwaregain = 0.000000 dB
-ad9371-phy.out_voltage1_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage1_TX_LO_frequency = 2560000000
-ad9371-phy.out_altvoltage2_RX_SN_LO_frequency = 2680000000
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage0_gain_control_mode = manual
-ad9371-phy.in_voltage0_quadrature_tracking_en = 1
-ad9371-phy.in_voltage0_hardwaregain = 30.000000 dB
-ad9371-phy.in_voltage0_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage1_hardwaregain = 30.000000 dB
-ad9371-phy.in_voltage1_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage1_gain_control_mode = manual
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage0_RX_LO_frequency = 2680000000
-ad9371-phy.calibrate_rx_qec_en = 0
-ad9371-phy.calibrate_tx_lol_en = 0
-ad9371-phy.calibrate_vswr_en = 0
-ad9371-phy.calibrate_tx_qec_en = 0
-ad9371-phy.calibrate_clgc_en = 0
-ad9371-phy.ensm_mode = radio_on
-ad9371-phy.calibrate_tx_lol_ext_en = 0
-ad9371-phy.calibrate_dpd_en = 0
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_scale = 0.000000
-load_myk_profile_file = /targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/profileNR80MHz.txt
-dds_mode_tx1 = 1
-dds_mode_tx2 = 1
-dac_buf_filename = /usr/local/lib/osc/waveforms/LTE20.mat
-tx_channel_0 = 1
-tx_channel_1 = 1
-tx_channel_2 = 0
-tx_channel_3 = 0
-global_settings_show = 1
-tx_show = 1
-rx_show = 1
-obs_show = 1
-fpga_show = 1
-
-[ADRV9371_ZC706]
-# NO_DEBUG=0; DEBUG=1
-debug_mode = 0
-# 20MHz 40MHz 80MHz=1; 10MHz=2; 5MHz=4
-interpolation_decimation_factor = 1
-# is taken into account only if "ad9371-phy.in_voltage0_gain_control_mode = manual"
-rx_gain_offset = 53

targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/ue.band7.tm1.PRB100.adrv9371-zc706.ini

-[AD9371]
-ad9371-phy.in_voltage2_rf_port_select = OFF
-ad9371-phy.in_voltage2_hardwaregain = -156.000000 dB
-ad9371-phy.in_voltage2_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_voltage0_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage0_hardwaregain = 0.000000 dB
-ad9371-phy.out_voltage0_quadrature_tracking_en = 1
-ad9371-phy.out_voltage1_hardwaregain = 0.000000 dB
-ad9371-phy.out_voltage1_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage1_TX_LO_frequency = 2560000000
-ad9371-phy.out_altvoltage2_RX_SN_LO_frequency = 2680000000
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage0_gain_control_mode = manual
-ad9371-phy.in_voltage0_quadrature_tracking_en = 1
-ad9371-phy.in_voltage0_hardwaregain = 25.000000 dB
-ad9371-phy.in_voltage0_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage1_hardwaregain = 25.000000 dB
-ad9371-phy.in_voltage1_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage1_gain_control_mode = manual
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage0_RX_LO_frequency = 2680000000
-ad9371-phy.calibrate_rx_qec_en = 0
-ad9371-phy.calibrate_tx_lol_en = 0
-ad9371-phy.calibrate_vswr_en = 0
-ad9371-phy.calibrate_tx_qec_en = 0
-ad9371-phy.calibrate_clgc_en = 0
-ad9371-phy.ensm_mode = radio_on
-ad9371-phy.calibrate_tx_lol_ext_en = 0
-ad9371-phy.calibrate_dpd_en = 0
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_scale = 0.000000
-load_myk_profile_file = /targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/profile20MHz.txt
-dds_mode_tx1 = 1
-dds_mode_tx2 = 1
-dac_buf_filename = /usr/local/lib/osc/waveforms/LTE20.mat
-tx_channel_0 = 1
-tx_channel_1 = 1
-tx_channel_2 = 0
-tx_channel_3 = 0
-global_settings_show = 1
-tx_show = 1
-rx_show = 1
-obs_show = 1
-fpga_show = 1
-
-[ADRV9371_ZC706]
-# NO_DEBUG=0; DEBUG=1
-debug_mode = 0
-# 20MHz 40MHz 80MHz=1; 10MHz=2; 5MHz=4
-interpolation_decimation_factor = 1
-# is taken into account only if "ad9371-phy.in_voltage0_gain_control_mode = manual"
-rx_gain_offset = 69

targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/ue.band7.tm1.PRB100.adrv9371-zc706_HWgain15dB.ini

-[AD9371]
-ad9371-phy.in_voltage2_rf_port_select = OFF
-ad9371-phy.in_voltage2_hardwaregain = -156.000000 dB
-ad9371-phy.in_voltage2_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_voltage0_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage0_hardwaregain = 0.000000 dB
-ad9371-phy.out_voltage0_quadrature_tracking_en = 1
-ad9371-phy.out_voltage1_hardwaregain = 0.000000 dB
-ad9371-phy.out_voltage1_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage1_TX_LO_frequency = 2560000000
-ad9371-phy.out_altvoltage2_RX_SN_LO_frequency = 2680000000
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage0_gain_control_mode = manual
-ad9371-phy.in_voltage0_quadrature_tracking_en = 1
-ad9371-phy.in_voltage0_hardwaregain = 15.000000 dB
-ad9371-phy.in_voltage0_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage1_hardwaregain = 15.000000 dB
-ad9371-phy.in_voltage1_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage1_gain_control_mode = manual
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage0_RX_LO_frequency = 2680000000
-ad9371-phy.calibrate_rx_qec_en = 0
-ad9371-phy.calibrate_tx_lol_en = 0
-ad9371-phy.calibrate_vswr_en = 0
-ad9371-phy.calibrate_tx_qec_en = 0
-ad9371-phy.calibrate_clgc_en = 0
-ad9371-phy.ensm_mode = radio_on
-ad9371-phy.calibrate_tx_lol_ext_en = 0
-ad9371-phy.calibrate_dpd_en = 0
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_scale = 0.000000
-load_myk_profile_file = /targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/profile20MHz.txt
-dds_mode_tx1 = 1
-dds_mode_tx2 = 1
-dac_buf_filename = /usr/local/lib/osc/waveforms/LTE20.mat
-tx_channel_0 = 1
-tx_channel_1 = 1
-tx_channel_2 = 0
-tx_channel_3 = 0
-global_settings_show = 1
-tx_show = 1
-rx_show = 1
-obs_show = 1
-fpga_show = 1
-
-[ADRV9371_ZC706]
-# NO_DEBUG=0; DEBUG=1
-debug_mode = 0
-# 20MHz 40MHz 80MHz=1; 10MHz=2; 5MHz=4
-interpolation_decimation_factor = 1
-# is taken into account only if "ad9371-phy.in_voltage0_gain_control_mode = manual"
-rx_gain_offset = 30

targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/ue.band7.tm1.PRB25.adrv9371-zc706.ini

-[AD9371]
-ad9371-phy.in_voltage2_rf_port_select = OFF
-ad9371-phy.in_voltage2_hardwaregain = -156.000000 dB
-ad9371-phy.in_voltage2_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_voltage0_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage0_hardwaregain = -10.000000 dB
-ad9371-phy.out_voltage0_quadrature_tracking_en = 1
-ad9371-phy.out_voltage1_hardwaregain = -10.000000 dB
-ad9371-phy.out_voltage1_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage1_TX_LO_frequency = 2535000000
-ad9371-phy.out_altvoltage2_RX_SN_LO_frequency = 2655000000
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage0_gain_control_mode = automatic
-ad9371-phy.in_voltage0_quadrature_tracking_en = 1
-ad9371-phy.in_voltage0_hardwaregain = 30.000000 dB
-ad9371-phy.in_voltage0_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage1_hardwaregain = 30.000000 dB
-ad9371-phy.in_voltage1_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage1_gain_control_mode = automatic
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage0_RX_LO_frequency = 2655000000
-ad9371-phy.calibrate_rx_qec_en = 0
-ad9371-phy.calibrate_tx_lol_en = 0
-ad9371-phy.calibrate_vswr_en = 0
-ad9371-phy.calibrate_tx_qec_en = 0
-ad9371-phy.calibrate_clgc_en = 0
-ad9371-phy.ensm_mode = radio_on
-ad9371-phy.calibrate_tx_lol_ext_en = 0
-ad9371-phy.calibrate_dpd_en = 0
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_scale = 0.000000
-load_myk_profile_file = /targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/profile_rx30_Tx60_syr.txt
-dds_mode_tx1 = 1
-dds_mode_tx2 = 1
-dac_buf_filename = /usr/local/lib/osc/waveforms/LTE20.mat
-tx_channel_0 = 1
-tx_channel_1 = 1
-tx_channel_2 = 0
-tx_channel_3 = 0
-global_settings_show = 1
-tx_show = 1
-rx_show = 1
-obs_show = 1
-fpga_show = 1
-
-[ADRV9371_ZC706]
-debug_mode = 0
-interpolation_decimation_factor = 4

targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/ue.band7.tm1.PRB50.adrv9371-zc706.ini

-[AD9371]
-ad9371-phy.in_voltage2_rf_port_select = OFF
-ad9371-phy.in_voltage2_hardwaregain = -156.000000 dB
-ad9371-phy.in_voltage2_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_voltage0_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage0_hardwaregain = -10.000000 dB
-ad9371-phy.out_voltage0_quadrature_tracking_en = 1
-ad9371-phy.out_voltage1_hardwaregain = -10.000000 dB
-ad9371-phy.out_voltage1_lo_leakage_tracking_en = 0
-ad9371-phy.out_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage1_TX_LO_frequency = 2535000000
-ad9371-phy.out_altvoltage2_RX_SN_LO_frequency = 2655000000
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage0_gain_control_mode = automatic
-ad9371-phy.in_voltage0_quadrature_tracking_en = 1
-ad9371-phy.in_voltage0_hardwaregain = 30.000000 dB
-ad9371-phy.in_voltage0_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.in_voltage1_quadrature_tracking_en = 1
-ad9371-phy.in_voltage1_hardwaregain = 30.000000 dB
-ad9371-phy.in_voltage1_temp_comp_gain = 0.00 dB
-ad9371-phy.in_voltage1_gain_control_mode = automatic
-ad9371-phy.in_voltage_rf_port_select_available = OFF INTERNALCALS OBS_SNIFFER SN_A SN_B SN_C ORX1_TX_LO ORX2_TX_LO ORX1_SN_LO ORX2_SN_LO
-ad9371-phy.out_altvoltage0_RX_LO_frequency = 2655000000
-ad9371-phy.calibrate_rx_qec_en = 0
-ad9371-phy.calibrate_tx_lol_en = 0
-ad9371-phy.calibrate_vswr_en = 0
-ad9371-phy.calibrate_tx_qec_en = 0
-ad9371-phy.calibrate_clgc_en = 0
-ad9371-phy.ensm_mode = radio_on
-ad9371-phy.calibrate_tx_lol_ext_en = 0
-ad9371-phy.calibrate_dpd_en = 0
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage0_TX1_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage5_TX2_I_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage4_TX2_I_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_frequency = 7999809
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage6_TX2_Q_F1_scale = 0.251160
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage3_TX1_Q_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_scale = 0.000000
-axi-ad9371-tx-hpc.out_altvoltage7_TX2_Q_F2_frequency = 1000327
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_phase = 0
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_scale = 0.501160
-axi-ad9371-tx-hpc.out_altvoltage2_TX1_Q_F1_frequency = 1999718
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_frequency = 19998117
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_raw = 1
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_phase = 90000
-axi-ad9371-tx-hpc.out_altvoltage1_TX1_I_F2_scale = 0.000000
-load_myk_profile_file = /targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/profile_rx30_Tx60_syr.txt
-dds_mode_tx1 = 1
-dds_mode_tx2 = 1
-dac_buf_filename = /usr/local/lib/osc/waveforms/LTE20.mat
-tx_channel_0 = 1
-tx_channel_1 = 1
-tx_channel_2 = 0
-tx_channel_3 = 0
-global_settings_show = 1
-tx_show = 1
-rx_show = 1
-obs_show = 1
-fpga_show = 1
-
-[ADRV9371_ZC706]
-debug_mode = 0
-interpolation_decimation_factor = 2

targets/ARCH/ADRV9371_ZC706/readme.txt

-Common command line:
---------------------
-cd /openairinterface5g/
-source oaienv
-
-HWLAT application:
-------------------
-./cmake_targets/build_oai -c -C -w ADRV9371_ZC706 --HWLAT
-./cmake_targets/lte-hwlat/build/lte-hwlat
-
-LTE-SOFTMODEM application:
---------------------------
-./cmake_targets/build_oai -c --eNB --UE --noS1 -w ADRV9371_ZC706
-sudo su
-source oaienv
-source ./targets/bin/init_nas_nos1 UE
-./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2680000000 -r100 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 --ue-max-power -25 --phy-test -g 7 --rf-config-file ./targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/ue.band7.tm1.PRB100.adrv9371-zc706_HWgain15dB.ini

targets/RT/USER/lte-hwlat.c

@@ -57,9 +57,9 @@
 #include "LAYER2/MAC/extern.h"
 #include "LAYER2/MAC/proto.h"
 
-#define 		RIFFA_CHANNEL_TESTER  0
-#define 		RIFFA_CHANNEL_TESTER2 0
-#define     RIFFA_CHANNEL_DATA1   1
+#define 		SYRIQ_CHANNEL_TESTER  0
+#define 		SYRIQ_CHANNEL_TESTER2 0
+#define     SYRIQ_CHANNEL_DATA1   1
 
 volatile int             oai_exit = 0;
 
@@ -346,7 +346,7 @@ int main(void)
 	int 				c 				= 0;
 	int 				numIter			= 0;
 	int 				fpga_loop		= 0;
-#if RIFFA_CHANNEL_DATA1
+#if SYRIQ_CHANNEL_DATA1
 	uint64_t			first_ts		= 0;
 	uint8_t				is_first_ts		= 0;
 	uint64_t			trx_read_cnt	= 0;
@@ -383,7 +383,7 @@ int main(void)
 #endif
 
   const char *openair_dir = getenv("OPENAIR_DIR");
-  const char *ini_file		= "/targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/ue.band7.tm1.PRB100.adrv9371-zc706_HWgain15dB.ini";
+  const char *ini_file    = "/usr/local/etc/syriq/ue.band7.tm1.PRB100.NR20.dat";
 
   int   readBlockSize;
   void* rxp[nb_antennas_rx];
@@ -726,9 +726,9 @@ int main(void)
 //#endif
 
 /* ********** ********** */
-/*  RIFFA_CHANNEL_DATA1  */
+/*  SYRIQ_CHANNEL_DATA1  */
 /* ********** ********** */
-#if RIFFA_CHANNEL_DATA1
+#if SYRIQ_CHANNEL_DATA1
 
 //  rf_device.trx_get_stats_func( &rf_device );
 
@@ -766,12 +766,12 @@ int main(void)
 //      break;
 //    }
 //  }
-	printf("RIFFA CHANNEL DATA1 done !!!\n");
+	printf("SYRIQ CHANNEL DATA1 done !!!\n");
   sleep(1);
 	return(0);
 #endif
 /* ********** ********** */
-/*  RIFFA_CHANNEL_DATA1  */
+/*  SYRIQ_CHANNEL_DATA1  */
 /* ********** ********** */
 
 
@@ -809,9 +809,9 @@ int main(void)
 		if (ret > 0)
 		{
 /* ********** ********** */
-/*  RIFFA_CHANNEL_TESTER */
+/*  SYRIQ_CHANNEL_TESTER */
 /* ********** ********** */
-#if RIFFA_CHANNEL_TESTER
+#if SYRIQ_CHANNEL_TESTER
       failure = 0;
 			for (i = 0; i < ret; i++)
 			{
@@ -843,9 +843,9 @@ int main(void)
       			}
 #endif
 /* ********** ********** */
-/*  RIFFA_CHANNEL_TESTER2*/
+/*  SYRIQ_CHANNEL_TESTER2*/
 /* ********** ********** */
-#if RIFFA_CHANNEL_TESTER2
+#if SYRIQ_CHANNEL_TESTER2
 //			printf("* ret=%d timestamp=%ld (%ld)\n", ret, timestamp, (timestamp%307200));
       failure = 0;
 			for (i = 0; i < ret; i++)

targets/RT/USER/nr-softmodem.c

@@ -164,7 +164,7 @@ double bw = 10.0e6;
 
 static int                      tx_max_power[MAX_NUM_CCs]; /* =  {0,0}*/;
 
-char   rf_config_file[1024]="./targets/ARCH/ADRV9371_ZC706/USERSPACE/PROFILES/gnb.band7.tm1.PRB100.NR40.adrv9371-zc706_HWgain15dB.ini";
+char   rf_config_file[1024]="/usr/local/etc/syriq/ue.band7.tm1.PRB100.NR40.dat";
 
 int chain_offset=0;
 int phy_test = 0;