Skip to content

O
OpenXG-RAN
Commit 4cbd9817 authored by Raphael Defosseux's avatar Raphael Defosseux
Browse files
Options

CI: adding a TDD scenario for basic-simulator 

Signed-off-by: default avatarRaphael Defosseux <raphael.defosseux@eurecom.fr>
parent bf55d13c
Hide whitespace changes
Inline Side-by-side
Showing with 567 additions and 204 deletions
ci-scripts/conf_files/lte-tdd-basic-sim.conf 0 → 100644
View file @ 4cbd9817
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "93";
////////// Physical parameters:
component_carriers = (
{
node_function = "eNodeB_3GPP";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "TDD";
tdd_config = 1;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 40;
downlink_frequency = 2350000000L;
uplink_frequency_offset = 0;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 0;
pdsch_referenceSignalPower =-27;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -106;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
log_config :
{
global_log_level ="debug";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
scheduler_mode = "fairRR";
puSch10xSnr = 200;
puCch10xSnr = 200;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [38];
max_pdschReferenceSignalPower = -27;
max_rxgain = 125;
eNB_instances = [0];
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
NETWORK_CONTROLLER :
{
FLEXRAN_ENABLED = "no";
FLEXRAN_INTERFACE_NAME = "lo";
FLEXRAN_IPV4_ADDRESS = "127.0.0.1";
FLEXRAN_PORT = 2210;
FLEXRAN_CACHE = "/mnt/oai_agent_cache";
FLEXRAN_AWAIT_RECONF = "no";
};
ci-scripts/reportTestLocally.sh
View file @ 4cbd9817
...@@ -317,188 +317,192 @@ then ...@@ -317,188 +317,192 @@ then
echo " <th>Statistics</th>" >> ./test_simulator_results.html echo " <th>Statistics</th>" >> ./test_simulator_results.html
echo " </tr>" >> ./test_simulator_results.html echo " </tr>" >> ./test_simulator_results.html
TRANS_MODES=("fdd" "tdd")
BW_CASES=(05 10 20) BW_CASES=(05 10 20)
for BW in ${BW_CASES[@]} for TMODE in ${TRANS_MODES[@]}
do do
ENB_LOG=$ARCHIVES_LOC/enb_${BW}MHz.log for BW in ${BW_CASES[@]}
UE_LOG=`echo $ENB_LOG | sed -e "s#enb#ue#"` do
if [ -f $ENB_LOG ] && [ -f $UE_LOG ] ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}MHz_enb.log
then UE_LOG=`echo $ENB_LOG | sed -e "s#enb#ue#"`
NAME_ENB=`echo $ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"` if [ -f $ENB_LOG ] && [ -f $UE_LOG ]
NAME_UE=`echo $UE_LOG | sed -e "s#$ARCHIVES_LOC/##"`
echo " <tr>" >> ./test_simulator_results.html
echo " <td>$NAME_ENB --- $NAME_UE</td>" >> ./test_simulator_results.html
echo " <td>N/A</td>" >> ./test_simulator_results.html
NB_ENB_GOT_SYNC=`egrep -c "got sync" $ENB_LOG`
NB_UE_GOT_SYNC=`egrep -c "got sync" $UE_LOG`
NB_ENB_SYNCED_WITH_UE=`egrep -c "got UE capabilities for UE" $ENB_LOG`
if [ $NB_ENB_GOT_SYNC -eq 1 ] && [ $NB_UE_GOT_SYNC -eq 2 ] && [ $NB_ENB_SYNCED_WITH_UE -eq 1 ]
then
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
else
echo " <td bgcolor = \"red\" >OK</td>" >> ./test_simulator_results.html
fi
echo " <td><pre>" >> ./test_simulator_results.html
if [ $NB_ENB_GOT_SYNC -eq 1 ]
then
echo "<font color = \"blue\">- eNB --> got sync</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- eNB NEVER got sync</b></font>" >> ./test_simulator_results.html
fi
if [ $NB_UE_GOT_SYNC -eq 2 ]
then
echo "<font color = \"blue\">- UE --> got sync</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- UE NEVER got sync</b></font>" >> ./test_simulator_results.html
fi
if [ $NB_ENB_SYNCED_WITH_UE -eq 1 ]
then
echo "<font color = \"blue\">- UE attached to eNB</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- UE NEVER attached to eNB</b></font>" >> ./test_simulator_results.html
fi
NB_SEGFAULT_ENB=`egrep -i -c "Segmentation Fault" $ENB_LOG`
if [ $NB_SEGFAULT_ENB -ne 0 ]
then
echo "<font color = \"red\"><b>- eNB --> Segmentation Fault</b></font>" >> ./test_simulator_results.html
fi
NB_SEGFAULT_UE=`egrep -i -c "Segmentation Fault" $UE_LOG`
if [ $NB_SEGFAULT_UE -ne 0 ]
then
echo "<font color = \"red\"><b>- UE --> Segmentation Fault</b></font>" >> ./test_simulator_results.html
fi
NB_ASSERTION_ENB=`egrep -i -c "Assertion" $ENB_LOG`
if [ $NB_ASSERTION_ENB -ne 0 ]
then
echo "<font color = \"red\"><b>- eNB --> Assertion</b></font>" >> ./test_simulator_results.html
awk 'BEGIN{assertion=10}{if(assertion < 3){print " " $0; assertion++};if ($0 ~/Assertion/){print " " $0;assertion=1}}END{}' $ENB_LOG >> ./test_simulator_results.html
fi
NB_ASSERTION_UE=`egrep -i -c "Assertion" $UE_LOG`
if [ $NB_ASSERTION_UE -ne 0 ]
then
echo "<font color = \"red\"><b>- eNB --> Assertion</b></font>" >> ./test_simulator_results.html
awk 'BEGIN{assertion=10}{if(assertion < 3){print " " $0; assertion++};if ($0 ~/Assertion/){print " " $0;assertion=1}}END{}' $UE_LOG >> ./test_simulator_results.html
fi
echo " </pre></td>" >> ./test_simulator_results.html
echo " </tr>" >> ./test_simulator_results.html
fi
PING_CASE=$ARCHIVES_LOC/${BW}MHz_ping_ue.txt
if [ -f $PING_CASE ]
then
echo " <tr>" >> ./test_simulator_results.html
NAME=`echo $PING_CASE | sed -e "s#$ARCHIVES_LOC/##"`
echo " <td>$NAME</td>" >> ./test_simulator_results.html
CMD=`egrep "COMMAND IS" $PING_CASE | sed -e "s#COMMAND IS: ##"`
echo " <td>$CMD</td>" >> ./test_simulator_results.html
FILE_COMPLETE=`egrep -c "ping statistics" $PING_CASE`
if [ $FILE_COMPLETE -eq 0 ]
then then
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html NAME_ENB=`echo $ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"`
NAME_UE=`echo $UE_LOG | sed -e "s#$ARCHIVES_LOC/##"`
echo " <tr>" >> ./test_simulator_results.html
echo " <td>$NAME_ENB --- $NAME_UE</td>" >> ./test_simulator_results.html
echo " <td>N/A</td>" >> ./test_simulator_results.html echo " <td>N/A</td>" >> ./test_simulator_results.html
else NB_ENB_GOT_SYNC=`egrep -c "got sync" $ENB_LOG`
NB_TR_PACKETS=`egrep "packets transmitted" $PING_CASE | sed -e "s# packets transmitted.*##"` NB_UE_GOT_SYNC=`egrep -c "got sync" $UE_LOG`
NB_RC_PACKETS=`egrep "packets transmitted" $PING_CASE | sed -e "s#^.*packets transmitted, ##" -e "s# received,.*##"` NB_ENB_SYNCED_WITH_UE=`egrep -c "got UE capabilities for UE" $ENB_LOG`
if [ $NB_TR_PACKETS -eq $NB_RC_PACKETS ] if [ $NB_ENB_GOT_SYNC -eq 1 ] && [ $NB_UE_GOT_SYNC -eq 2 ] && [ $NB_ENB_SYNCED_WITH_UE -eq 1 ]
then then
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
else else
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html echo " <td bgcolor = \"red\" >OK</td>" >> ./test_simulator_results.html
fi fi
echo " <td>" >> ./test_simulator_results.html echo " <td><pre>" >> ./test_simulator_results.html
echo " <pre>" >> ./test_simulator_results.html if [ $NB_ENB_GOT_SYNC -eq 1 ]
STATS=`egrep "packets transmitted" $PING_CASE | sed -e "s#^.*received, ##" -e "s#, time.*##" -e "s# packet loss##"` then
echo "Packet Loss : $STATS" >> ./test_simulator_results.html echo "<font color = \"blue\">- eNB --> got sync</font>" >> ./test_simulator_results.html
RTTMIN=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[1] " " $5}'` else
echo "RTT Minimal : $RTTMIN" >> ./test_simulator_results.html echo "<font color = \"red\"><b>- eNB NEVER got sync</b></font>" >> ./test_simulator_results.html
RTTAVG=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[2] " " $5}'` fi
echo "RTT Average : $RTTAVG" >> ./test_simulator_results.html if [ $NB_UE_GOT_SYNC -eq 2 ]
RTTMAX=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[3] " " $5}'` then
echo "RTT Maximal : $RTTMAX" >> ./test_simulator_results.html echo "<font color = \"blue\">- UE --> got sync</font>" >> ./test_simulator_results.html
echo " </pre>" >> ./test_simulator_results.html else
echo " </td>" >> ./test_simulator_results.html echo "<font color = \"red\"><b>- UE NEVER got sync</b></font>" >> ./test_simulator_results.html
fi fi
echo " </tr>" >> ./test_simulator_results.html if [ $NB_ENB_SYNCED_WITH_UE -eq 1 ]
fi then
echo "<font color = \"blue\">- UE attached to eNB</font>" >> ./test_simulator_results.html
if [ -f $ARCHIVES_LOC/${BW}*iperf*dl*client*txt ] else
then echo "<font color = \"red\"><b>- UE NEVER attached to eNB</b></font>" >> ./test_simulator_results.html
IPERF_TESTS=`ls $ARCHIVES_LOC/${BW}*iperf*client*txt` fi
else NB_SEGFAULT_ENB=`egrep -i -c "Segmentation Fault" $ENB_LOG`
echo "There are no iperf files" if [ $NB_SEGFAULT_ENB -ne 0 ]
IPERF_TESTS="" then
fi echo "<font color = \"red\"><b>- eNB --> Segmentation Fault</b></font>" >> ./test_simulator_results.html
for IPERF_CASE in $IPERF_TESTS fi
do NB_SEGFAULT_UE=`egrep -i -c "Segmentation Fault" $UE_LOG`
echo " <tr>" >> ./test_simulator_results.html if [ $NB_SEGFAULT_UE -ne 0 ]
NAME=`echo $IPERF_CASE | sed -e "s#$ARCHIVES_LOC/##"` then
echo " <td>$NAME</td>" >> ./test_simulator_results.html echo "<font color = \"red\"><b>- UE --> Segmentation Fault</b></font>" >> ./test_simulator_results.html
CMD=`egrep "COMMAND IS" $IPERF_CASE | sed -e "s#COMMAND IS: ##"` fi
echo " <td>$CMD</td>" >> ./test_simulator_results.html NB_ASSERTION_ENB=`egrep -i -c "Assertion" $ENB_LOG`
REQ_BITRATE=`echo $CMD | sed -e "s#^.*-b ##" -e "s#-i 1.*##"` if [ $NB_ASSERTION_ENB -ne 0 ]
if [[ $REQ_BITRATE =~ .*K.* ]] then
then echo "<font color = \"red\"><b>- eNB --> Assertion</b></font>" >> ./test_simulator_results.html
REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#K##"` awk 'BEGIN{assertion=10}{if(assertion < 3){print " " $0; assertion++};if ($0 ~/Assertion/){print " " $0;assertion=1}}END{}' $ENB_LOG >> ./test_simulator_results.html
FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000.0" | bc -l` fi
fi NB_ASSERTION_UE=`egrep -i -c "Assertion" $UE_LOG`
if [[ $REQ_BITRATE =~ .*M.* ]] if [ $NB_ASSERTION_UE -ne 0 ]
then then
REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#M##"` echo "<font color = \"red\"><b>- eNB --> Assertion</b></font>" >> ./test_simulator_results.html
FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000000.0" | bc -l` awk 'BEGIN{assertion=10}{if(assertion < 3){print " " $0; assertion++};if ($0 ~/Assertion/){print " " $0;assertion=1}}END{}' $UE_LOG >> ./test_simulator_results.html
fi
echo " </pre></td>" >> ./test_simulator_results.html
echo " </tr>" >> ./test_simulator_results.html
fi fi
if [[ $REQ_BITRATE =~ .*G.* ]] PING_CASE=$ARCHIVES_LOC/${TMODE}_${BW}MHz_ping_ue.txt
if [ -f $PING_CASE ]
then then
REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#G##"` echo " <tr>" >> ./test_simulator_results.html
FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000000000.0" | bc -l` NAME=`echo $PING_CASE | sed -e "s#$ARCHIVES_LOC/##"`
echo " <td>$NAME</td>" >> ./test_simulator_results.html
CMD=`egrep "COMMAND IS" $PING_CASE | sed -e "s#COMMAND IS: ##"`
echo " <td>$CMD</td>" >> ./test_simulator_results.html
FILE_COMPLETE=`egrep -c "ping statistics" $PING_CASE`
if [ $FILE_COMPLETE -eq 0 ]
then
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
echo " <td>N/A</td>" >> ./test_simulator_results.html
else
NB_TR_PACKETS=`egrep "packets transmitted" $PING_CASE | sed -e "s# packets transmitted.*##"`
NB_RC_PACKETS=`egrep "packets transmitted" $PING_CASE | sed -e "s#^.*packets transmitted, ##" -e "s# received,.*##"`
if [ $NB_TR_PACKETS -eq $NB_RC_PACKETS ]
then
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
else
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
fi
echo " <td>" >> ./test_simulator_results.html
echo " <pre>" >> ./test_simulator_results.html
STATS=`egrep "packets transmitted" $PING_CASE | sed -e "s#^.*received, ##" -e "s#, time.*##" -e "s# packet loss##"`
echo "Packet Loss : $STATS" >> ./test_simulator_results.html
RTTMIN=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[1] " " $5}'`
echo "RTT Minimal : $RTTMIN" >> ./test_simulator_results.html
RTTAVG=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[2] " " $5}'`
echo "RTT Average : $RTTAVG" >> ./test_simulator_results.html
RTTMAX=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[3] " " $5}'`
echo "RTT Maximal : $RTTMAX" >> ./test_simulator_results.html
echo " </pre>" >> ./test_simulator_results.html
echo " </td>" >> ./test_simulator_results.html
fi
echo " </tr>" >> ./test_simulator_results.html
fi fi
FILE_COMPLETE=`egrep -c "Server Report" $IPERF_CASE`
if [ $FILE_COMPLETE -eq 0 ] if [ -f $ARCHIVES_LOC/${TMODE}_${BW}*iperf*dl*client*txt ]
then then
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}*iperf*client*txt`
SERVER_FILE=`echo $IPERF_CASE | sed -e "s#client#server#"`
FLOAT_EFF_BITRATE=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*Bytes *##" -e "s#sec *.*#sec#" | awk 'BEGIN{s=0;n=0}{n++;if ($2 ~/Mbits/){a = $1 * 1000000};if ($2 ~/Kbits/){a = $1 * 1000};s=s+a}END{br=s/n; printf "%.0f", br}'`
EFFECTIVE_BITRATE=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*Bytes *##" -e "s#sec *.*#sec#" | awk 'BEGIN{s=0;n=0}{n++;if ($2 ~/Mbits/){a = $1 * 1000000};if ($2 ~/Kbits/){a = $1 * 1000};s=s+a}END{br=s/n; if(br>1000000){printf "%.2f MBits/sec", br/1000000}}'`
PERF=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.2f", $0}'`
JITTER=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*/sec *##" -e "s# *ms.*##" | awk 'BEGIN{s=0;n=0}{n++;s+=$1}END{jitter=s/n; printf "%.3f ms", jitter}'`
PACKETLOSS_NOSIGN=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*(##" -e "s#%.*##" | awk 'BEGIN{s=0;n=0}{n++;s+=$1}END{per=s/n; printf "%.1f", per}'`
PACKETLOSS=`echo "${PACKETLOSS_NOSIGN}%"`
else else
EFFECTIVE_BITRATE=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"` echo "There are no iperf files"
if [[ $EFFECTIVE_BITRATE =~ .*Kbits/sec.* ]] IPERF_TESTS=""
fi
for IPERF_CASE in $IPERF_TESTS
do
echo " <tr>" >> ./test_simulator_results.html
NAME=`echo $IPERF_CASE | sed -e "s#$ARCHIVES_LOC/##"`
echo " <td>$NAME</td>" >> ./test_simulator_results.html
CMD=`egrep "COMMAND IS" $IPERF_CASE | sed -e "s#COMMAND IS: ##"`
echo " <td>$CMD</td>" >> ./test_simulator_results.html
REQ_BITRATE=`echo $CMD | sed -e "s#^.*-b ##" -e "s#-i 1.*##"`
if [[ $REQ_BITRATE =~ .*K.* ]]
then then
EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Kbits/sec.*##"` REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#K##"`
FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000" | bc -l` FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000.0" | bc -l`
fi fi
if [[ $EFFECTIVE_BITRATE =~ .*Mbits/sec.* ]] if [[ $REQ_BITRATE =~ .*M.* ]]
then then
EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Mbits/sec.*##"` REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#M##"`
FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000000" | bc -l` FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000000.0" | bc -l`
fi fi
if [[ $EFFECTIVE_BITRATE =~ .*Gbits/sec.* ]] if [[ $REQ_BITRATE =~ .*G.* ]]
then then
EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Gbits/sec.*##"` REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#G##"`
FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000000000" | bc -l` FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000000000.0" | bc -l`
fi fi
PERF=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.2f", $0}'` FILE_COMPLETE=`egrep -c "Server Report" $IPERF_CASE`
PERF_INT=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.0f", $0}'` if [ $FILE_COMPLETE -eq 0 ]
if [[ $PERF_INT -lt 90 ]]
then then
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
SERVER_FILE=`echo $IPERF_CASE | sed -e "s#client#server#"`
FLOAT_EFF_BITRATE=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*Bytes *##" -e "s#sec *.*#sec#" | awk 'BEGIN{s=0;n=0}{n++;if ($2 ~/Mbits/){a = $1 * 1000000};if ($2 ~/Kbits/){a = $1 * 1000};s=s+a}END{br=s/n; printf "%.0f", br}'`
EFFECTIVE_BITRATE=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*Bytes *##" -e "s#sec *.*#sec#" | awk 'BEGIN{s=0;n=0}{n++;if ($2 ~/Mbits/){a = $1 * 1000000};if ($2 ~/Kbits/){a = $1 * 1000};s=s+a}END{br=s/n; if(br>1000000){printf "%.2f MBits/sec", br/1000000}}'`
PERF=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.2f", $0}'`
JITTER=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*/sec *##" -e "s# *ms.*##" | awk 'BEGIN{s=0;n=0}{n++;s+=$1}END{jitter=s/n; printf "%.3f ms", jitter}'`
PACKETLOSS_NOSIGN=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*(##" -e "s#%.*##" | awk 'BEGIN{s=0;n=0}{n++;s+=$1}END{per=s/n; printf "%.1f", per}'`
PACKETLOSS=`echo "${PACKETLOSS_NOSIGN}%"`
else else
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html EFFECTIVE_BITRATE=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
if [[ $EFFECTIVE_BITRATE =~ .*Kbits/sec.* ]]
then
EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Kbits/sec.*##"`
FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000" | bc -l`
fi
if [[ $EFFECTIVE_BITRATE =~ .*Mbits/sec.* ]]
then
EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Mbits/sec.*##"`
FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000000" | bc -l`
fi
if [[ $EFFECTIVE_BITRATE =~ .*Gbits/sec.* ]]
then
EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Gbits/sec.*##"`
FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000000000" | bc -l`
fi
PERF=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.2f", $0}'`
PERF_INT=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.0f", $0}'`
if [[ $PERF_INT -lt 90 ]]
then
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
else
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
fi
EFFECTIVE_BITRATE=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
JITTER=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*Mbits/sec *##" -e "s#ms.*#ms#"`
PACKETLOSS=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*(##" -e "s#).*##"`
fi fi
EFFECTIVE_BITRATE=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"` echo " <td>" >> ./test_simulator_results.html
JITTER=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*Mbits/sec *##" -e "s#ms.*#ms#"` echo " <pre>" >> ./test_simulator_results.html
PACKETLOSS=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*(##" -e "s#).*##"` echo "Bitrate : $EFFECTIVE_BITRATE" >> ./test_simulator_results.html
fi echo "Bitrate Perf : $PERF %" >> ./test_simulator_results.html
echo " <td>" >> ./test_simulator_results.html echo "Jitter : $JITTER" >> ./test_simulator_results.html
echo " <pre>" >> ./test_simulator_results.html echo "Packet Loss : $PACKETLOSS" >> ./test_simulator_results.html
echo "Bitrate : $EFFECTIVE_BITRATE" >> ./test_simulator_results.html echo " </pre>" >> ./test_simulator_results.html
echo "Bitrate Perf : $PERF %" >> ./test_simulator_results.html echo " </td>" >> ./test_simulator_results.html
echo "Jitter : $JITTER" >> ./test_simulator_results.html echo " </tr>" >> ./test_simulator_results.html
echo "Packet Loss : $PACKETLOSS" >> ./test_simulator_results.html done
echo " </pre>" >> ./test_simulator_results.html
echo " </td>" >> ./test_simulator_results.html
echo " </tr>" >> ./test_simulator_results.html
done done
done done
......
ci-scripts/runTestOnVM.sh
View file @ 4cbd9817
...@@ -75,6 +75,7 @@ function start_basic_sim_enb { ...@@ -75,6 +75,7 @@ function start_basic_sim_enb {
local LOC_EPC_IP_ADDR=$3 local LOC_EPC_IP_ADDR=$3
local LOC_LOG_FILE=$4 local LOC_LOG_FILE=$4
local LOC_NB_RBS=$5 local LOC_NB_RBS=$5
local LOC_CONF_FILE=$6
echo "cd /home/ubuntu/tmp" > $1 echo "cd /home/ubuntu/tmp" > $1
echo "echo \"sudo apt-get --yes --quiet install daemon \"" >> $1 echo "echo \"sudo apt-get --yes --quiet install daemon \"" >> $1
echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1 echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
...@@ -83,13 +84,13 @@ function start_basic_sim_enb { ...@@ -83,13 +84,13 @@ function start_basic_sim_enb {
echo "echo \"source oaienv\"" >> $1 echo "echo \"source oaienv\"" >> $1
echo "source oaienv" >> $1 echo "source oaienv" >> $1
echo "cd ci-scripts/conf_files/" >> $1 echo "cd ci-scripts/conf_files/" >> $1
echo "cp lte-basic-sim.conf ci-lte-basic-sim.conf" >> $1 echo "cp $LOC_CONF_FILE ci-$LOC_CONF_FILE" >> $1
echo "sed -i -e 's#N_RB_DL.*=.*;#N_RB_DL = $LOC_NB_RBS;#' -e 's#CI_MME_IP_ADDR#$LOC_EPC_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$LOC_VM_IP_ADDR#' ci-lte-basic-sim.conf" >> $1 echo "sed -i -e 's#N_RB_DL.*=.*;#N_RB_DL = $LOC_NB_RBS;#' -e 's#CI_MME_IP_ADDR#$LOC_EPC_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$LOC_VM_IP_ADDR#' ci-$LOC_CONF_FILE" >> $1
echo "echo \"grep N_RB_DL ci-lte-basic-sim.conf\"" >> $1 echo "echo \"grep N_RB_DL ci-$LOC_CONF_FILE\"" >> $1
echo "grep N_RB_DL ci-lte-basic-sim.conf | sed -e 's#N_RB_DL.*=#N_RB_DL =#'" >> $1 echo "grep N_RB_DL ci-$LOC_CONF_FILE | sed -e 's#N_RB_DL.*=#N_RB_DL =#'" >> $1
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/\"" >> $1 echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/\"" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/" >> $1 echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/" >> $1
echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-lte-basic-sim.conf\" > ./my-lte-softmodem-run.sh " >> $1 echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE\" > ./my-lte-softmodem-run.sh " >> $1
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1 echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
echo "cat ./my-lte-softmodem-run.sh" >> $1 echo "cat ./my-lte-softmodem-run.sh" >> $1
echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/enb -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1 echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/enb -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
...@@ -102,9 +103,10 @@ function start_basic_sim_enb { ...@@ -102,9 +103,10 @@ function start_basic_sim_enb {
function start_basic_sim_ue { function start_basic_sim_ue {
local LOC_UE_LOG_FILE=$3 local LOC_UE_LOG_FILE=$3
local LOC_NB_RBS=$4 local LOC_NB_RBS=$4
local LOC_FREQUENCY=$5
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue\"" > $1 echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue\"" > $1
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" > $1 echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" > $1
echo "echo \"./lte-uesoftmodem -C 2680000000 -r $LOC_NB_RBS --ue-rxgain 140\" > ./my-lte-uesoftmodem-run.sh" >> $1 echo "echo \"./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_NB_RBS --ue-rxgain 140\" > ./my-lte-uesoftmodem-run.sh" >> $1
echo "chmod 775 ./my-lte-uesoftmodem-run.sh" >> $1 echo "chmod 775 ./my-lte-uesoftmodem-run.sh" >> $1
echo "cat ./my-lte-uesoftmodem-run.sh" >> $1 echo "cat ./my-lte-uesoftmodem-run.sh" >> $1
echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/ue -o /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ./my-lte-uesoftmodem-run.sh" >> $1 echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/ue -o /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ./my-lte-uesoftmodem-run.sh" >> $1
...@@ -270,7 +272,6 @@ function recover_core_dump { ...@@ -270,7 +272,6 @@ function recover_core_dump {
local TC=`echo $3 | sed -e "s#^.*enb_##" -e "s#Hz.*#Hz#"` local TC=`echo $3 | sed -e "s#^.*enb_##" -e "s#Hz.*#Hz#"`
echo "Segmentation fault detected on enb -> recovering core dump" echo "Segmentation fault detected on enb -> recovering core dump"
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb" > $1 echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb" > $1
echo "cp /home/ubuntu/tmp/ci-scripts/conf_files/ci-lte-basic-sim.conf ." >> $1
echo "sync" >> $1 echo "sync" >> $1
echo "sudo tar -cjhf basic-simulator-enb-core-${TC}.bz2 core lte-softmodem *.so ci-lte-basic-sim.conf my-lte-softmodem-run.sh" >> $1 echo "sudo tar -cjhf basic-simulator-enb-core-${TC}.bz2 core lte-softmodem *.so ci-lte-basic-sim.conf my-lte-softmodem-run.sh" >> $1
echo "sudo rm core" >> $1 echo "sudo rm core" >> $1
...@@ -694,16 +695,16 @@ then ...@@ -694,16 +695,16 @@ then
fi fi
echo "############################################################" echo "############################################################"
echo "Starting the eNB at 5MHz" echo "Starting the eNB in FDD-5MHz mode"
echo "############################################################" echo "############################################################"
CURRENT_ENB_LOG_FILE=enb_05MHz.log CURRENT_ENB_LOG_FILE=fdd_05MHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-fdd-basic-sim.conf
echo "############################################################" echo "############################################################"
echo "Starting the UE at 5MHz" echo "Starting the UE in FDD-5MHz mode"
echo "############################################################" echo "############################################################"
CURRENT_UE_LOG_FILE=ue_05MHz.log CURRENT_UE_LOG_FILE=fdd_05MHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2680
if [ $UE_SYNC -eq 0 ] if [ $UE_SYNC -eq 0 ]
then then
echo "Problem w/ eNB and UE not syncing" echo "Problem w/ eNB and UE not syncing"
...@@ -719,14 +720,15 @@ then ...@@ -719,14 +720,15 @@ then
echo "############################################################" echo "############################################################"
echo "Pinging the UE" echo "Pinging the UE"
echo "############################################################" echo "############################################################"
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR 05MHz_ping_ue.txt PING_LOG_FILE=fdd_05MHz_ping_ue.txt
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/05MHz_ping_ue.txt $ARCHIVES_LOC ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
check_ping_result $ARCHIVES_LOC/05MHz_ping_ue.txt 20 scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
echo "############################################################" echo "############################################################"
echo "Iperf DL" echo "Iperf DL"
echo "############################################################" echo "############################################################"
CURR_IPERF_LOG_BASE=05MHz_iperf_dl CURR_IPERF_LOG_BASE=fdd_05MHz_iperf_dl
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
...@@ -735,7 +737,7 @@ then ...@@ -735,7 +737,7 @@ then
echo "############################################################" echo "############################################################"
echo "Iperf UL" echo "Iperf UL"
echo "############################################################" echo "############################################################"
CURR_IPERF_LOG_BASE=05MHz_iperf_ul CURR_IPERF_LOG_BASE=fdd_05MHz_iperf_ul
iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 2 $CURR_IPERF_LOG_BASE iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 2 $CURR_IPERF_LOG_BASE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
...@@ -750,16 +752,16 @@ then ...@@ -750,16 +752,16 @@ then
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
echo "############################################################" echo "############################################################"
echo "Starting the eNB at 10MHz" echo "Starting the eNB in FDD-10MHz mode"
echo "############################################################" echo "############################################################"
CURRENT_ENB_LOG_FILE=enb_10MHz.log CURRENT_ENB_LOG_FILE=fdd_10MHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 50 start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 50 lte-fdd-basic-sim.conf
echo "############################################################" echo "############################################################"
echo "Starting the UE at 10MHz" echo "Starting the UE in FDD-10MHz mode"
echo "############################################################" echo "############################################################"
CURRENT_UE_LOG_FILE=ue_10MHz.log CURRENT_UE_LOG_FILE=fdd_10MHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 50 start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 50 2680
if [ $UE_SYNC -eq 0 ] if [ $UE_SYNC -eq 0 ]
then then
echo "Problem w/ eNB and UE not syncing" echo "Problem w/ eNB and UE not syncing"
...@@ -775,14 +777,15 @@ then ...@@ -775,14 +777,15 @@ then
echo "############################################################" echo "############################################################"
echo "Pinging the UE" echo "Pinging the UE"
echo "############################################################" echo "############################################################"
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR 10MHz_ping_ue.txt PING_LOG_FILE=fdd_10MHz_ping_ue.txt
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/10MHz_ping_ue.txt $ARCHIVES_LOC ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
check_ping_result $ARCHIVES_LOC/10MHz_ping_ue.txt 20 scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
echo "############################################################" echo "############################################################"
echo "Iperf DL" echo "Iperf DL"
echo "############################################################" echo "############################################################"
CURR_IPERF_LOG_BASE=10MHz_iperf_dl CURR_IPERF_LOG_BASE=fdd_10MHz_iperf_dl
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
...@@ -791,7 +794,7 @@ then ...@@ -791,7 +794,7 @@ then
echo "############################################################" echo "############################################################"
echo "Iperf UL" echo "Iperf UL"
echo "############################################################" echo "############################################################"
CURR_IPERF_LOG_BASE=10MHz_iperf_ul CURR_IPERF_LOG_BASE=fdd_10MHz_iperf_ul
iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 2 $CURR_IPERF_LOG_BASE iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 2 $CURR_IPERF_LOG_BASE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
...@@ -806,16 +809,16 @@ then ...@@ -806,16 +809,16 @@ then
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
echo "############################################################" echo "############################################################"
echo "Starting the eNB at 20MHz" echo "Starting the eNB in FDD-20MHz mode"
echo "############################################################" echo "############################################################"
CURRENT_ENB_LOG_FILE=enb_20MHz.log CURRENT_ENB_LOG_FILE=fdd_20MHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 100 start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 100 lte-fdd-basic-sim.conf
echo "############################################################" echo "############################################################"
echo "Starting the UE at 20MHz" echo "Starting the UE in FDD-20MHz mode"
echo "############################################################" echo "############################################################"
CURRENT_UE_LOG_FILE=ue_20MHz.log CURRENT_UE_LOG_FILE=fdd_20MHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 100 start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 100 2680
if [ $UE_SYNC -eq 0 ] if [ $UE_SYNC -eq 0 ]
then then
echo "Problem w/ eNB and UE not syncing" echo "Problem w/ eNB and UE not syncing"
...@@ -831,27 +834,154 @@ then ...@@ -831,27 +834,154 @@ then
echo "############################################################" echo "############################################################"
echo "Pinging the UE" echo "Pinging the UE"
echo "############################################################" echo "############################################################"
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR 20MHz_ping_ue.txt PING_LOG_FILE=fdd_20MHz_ping_ue.txt
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/20MHz_ping_ue.txt $ARCHIVES_LOC ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
check_ping_result $ARCHIVES_LOC/20MHz_ping_ue.txt 20 scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
echo "############################################################" echo "############################################################"
echo "Iperf DL" echo "Iperf DL"
echo "############################################################" echo "############################################################"
CURR_IPERF_LOG_BASE=20MHz_iperf_dl CURR_IPERF_LOG_BASE=fdd_20MHz_iperf_dl
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 15 check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 15
echo "############################################################" echo "############################################################"
echo "Iperf UL" echo "Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
echo "############################################################"
echo "Starting the eNB in TDD-5MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=tdd_05MHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-tdd-basic-sim.conf
echo "############################################################"
echo "Starting the UE in TDD-5MHz mode"
echo "############################################################"
CURRENT_UE_LOG_FILE=tdd_05MHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2350
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
terminate_ltebox_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
exit -1
fi
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
echo "############################################################" echo "############################################################"
# CURR_IPERF_LOG_BASE=20MHz_iperf_ul echo "Pinging the UE"
# iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 1 $CURR_IPERF_LOG_BASE echo "############################################################"
# scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC PING_LOG_FILE=tdd_05MHz_ping_ue.txt
# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
# check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 1 scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
echo "############################################################"
echo "Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
echo "############################################################"
echo "Starting the eNB in TDD-10MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=tdd_10MHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 50 lte-tdd-basic-sim.conf
echo "############################################################"
echo "Starting the UE in TDD-10MHz mode"
echo "############################################################"
CURRENT_UE_LOG_FILE=tdd_10MHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 50 2350
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
terminate_ltebox_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
exit -1
fi
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
echo "############################################################"
echo "Pinging the UE"
echo "############################################################"
PING_LOG_FILE=tdd_10MHz_ping_ue.txt
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
echo "############################################################"
echo "Iperf DL"
echo "############################################################"
CURR_IPERF_LOG_BASE=tdd_10MHz_iperf_dl
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 6 $CURR_IPERF_LOG_BASE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 6
echo "############################################################"
echo "Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
echo "############################################################"
echo "Starting the eNB in TDD-20MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=tdd_20MHz_enb.log
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 100 lte-tdd-basic-sim.conf
echo "############################################################"
echo "Starting the UE in TDD-20MHz mode"
echo "############################################################"
CURRENT_UE_LOG_FILE=tdd_20MHz_ue.log
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 100 2350
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
terminate_ltebox_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
exit -1
fi
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
echo "############################################################"
echo "Pinging the UE"
echo "############################################################"
PING_LOG_FILE=tdd_20MHz_ping_ue.txt
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
echo "############################################################"
echo "Iperf DL"
echo "############################################################"
CURR_IPERF_LOG_BASE=tdd_20MHz_iperf_dl
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 6 $CURR_IPERF_LOG_BASE
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 6
echo "############################################################" echo "############################################################"
echo "Terminate enb/ue simulators" echo "Terminate enb/ue simulators"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment