Skip to content

O
OpenXG-RAN
Commit 4f032910 authored by Daniel0326's avatar Daniel0326
Browse files
Options

add lte-enb-nbiot.c

parent 6bd242cc
Hide whitespace changes
Inline Side-by-side
Showing with 2377 additions and 644 deletions
cmake_targets/CMakeLists.txt
View file @ 4f032910
......@@ -2141,6 +2141,7 @@ add_definitions(-DASN1_MINIMUM_VERSION=924)
add_executable(lte-softmodem
${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
${OPENAIR_TARGETS}/RT/USER/lte-enb.c
${OPENAIR_TARGETS}/RT/USER/lte-enb-nbiot.c
${OPENAIR_TARGETS}/RT/USER/lte-ru.c
${OPENAIR_TARGETS}/RT/USER/ru_control.c
${OPENAIR_TARGETS}/RT/USER/lte-softmodem.c
......
targets/RT/USER/lte-enb-nbiot.c 0 → 100644
View file @ 4f032910
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.0 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/*! \file lte-enb.c
* \brief Top-level threads for eNodeB
* \author R. Knopp, F. Kaltenberger, Navid Nikaein
* \date 2012
* \version 0.1
* \company Eurecom
* \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr, navid.nikaein@eurecom.fr
* \note
* \warning
*/
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <sched.h>
#include <linux/sched.h>
#include <signal.h>
#include <execinfo.h>
#include <getopt.h>
#include <sys/sysinfo.h>
#include "rt_wrapper.h"
//#include "time_utils.h"
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
#include "assertions.h"
#include "msc.h"
#include "PHY/types.h"
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all
#include "../../ARCH/COMMON/common_lib.h"
//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all
#include "PHY/LTE_TRANSPORT/if4_tools.h"
#include "PHY/LTE_TRANSPORT/if5_tools.h"
#include "PHY/phy_extern.h"
//#include "SCHED/extern.h"
#include "SCHED/sched_eNB.h"
#include "../../SIMU/USER/init_lte.h"
//NB-IoT
#include "PHY/defs_eNB.h"
#include "PHY/defs_L1_NB_IoT.h"
//#include "PHY/defs_L1_NB_IoT.h"
#include "SCHED_NBIOT/defs_NB_IoT.h"
#include "SCHED/sched_common.h" // for calling prach_procedures_NB_IoT()
#include "PHY_INTERFACE/IF_Module_NB_IoT.h"
#include "LAYER2/MAC/extern_NB_IoT.h"
#include "PHY/extern_NB_IoT.h"
#include "LAYER2/MAC/defs.h"
#include "PHY_INTERFACE/phy_interface_extern.h"
#ifdef SMBV
#include "PHY/TOOLS/smbv.h"
unsigned short config_frames[4] = {2,9,11,13};
#endif
#include "UTIL/OTG/otg_tx.h"
#include "UTIL/OTG/otg_externs.h"
#include "UTIL/MATH/oml.h"
#include "common/utils/LOG/vcd_signal_dumper.h"
#include "UTIL/OPT/opt.h"
#include "enb_config.h"
//#include "PHY/TOOLS/time_meas.h"
#ifndef OPENAIR2
#include "UTIL/OTG/otg_extern.h"
#endif
#if defined(ENABLE_ITTI)
# if defined(ENABLE_USE_MME)
# include "s1ap_eNB.h"
#ifdef PDCP_USE_NETLINK
# include "SIMULATION/ETH_TRANSPORT/proto.h"
#endif
# endif
#endif
#include "T.h"
extern volatile int oai_exit;
//#define DEBUG_THREADS 1
//#define USRP_DEBUG 1
struct timing_info_t {
//unsigned int frame, hw_slot, last_slot, next_slot;
RTIME time_min, time_max, time_avg, time_last, time_now;
//unsigned int mbox0, mbox1, mbox2, mbox_target;
unsigned int n_samples;
} timing_info;
// Fix per CC openair rf/if device update
// extern openair0_device openair0;
#if defined(ENABLE_ITTI)
extern volatile int start_eNB;
extern volatile int start_UE;
#endif
extern volatile int oai_exit;
extern openair0_config_t openair0_cfg[MAX_CARDS];
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern int transmission_mode;
extern int oaisim_flag;
//pthread_t main_eNB_thread;
time_stats_t softmodem_stats_mt; // main thread
time_stats_t softmodem_stats_hw; // hw acquisition
time_stats_t softmodem_stats_rxtx_sf; // total tx time
time_stats_t softmodem_stats_rx_sf; // total rx time
//int32_t **rxdata;
//int32_t **txdata;
uint8_t seqno; //sequence number
static int time_offset[4] = {0,0,0,0};
/* mutex, cond and variable to serialize phy proc TX calls
* (this mechanism may be relaxed in the future for better
* performances)
*/
static struct {
pthread_mutex_t mutex_phy_proc_tx;
pthread_cond_t cond_phy_proc_tx;
volatile uint8_t phy_proc_CC_id;
} sync_phy_proc;
extern double cpuf;
void exit_fun(const char* s);
void init_eNB(eNB_func_NB_IoT_t node_function[], eNB_timing_NB_IoT_t node_timing[],int nb_inst,eth_params_t *,int,int);
void stop_eNB(int nb_inst);
static int recv_if_count = 0;
struct timespec start_rf_new, start_rf_prev, start_rf_prev2, end_rf;
openair0_timestamp start_rf_new_ts, start_rf_prev_ts, start_rf_prev2_ts, end_rf_ts;
extern struct timespec start_fh, start_fh_prev;
extern int start_fh_sf, start_fh_prev_sf;
struct timespec end_fh;
int end_fh_sf;
static inline void thread_top_init(char *thread_name,
int affinity,
uint64_t runtime,
uint64_t deadline,
uint64_t period) {
MSC_START_USE();
#ifdef DEADLINE_SCHEDULER
struct sched_attr attr;
unsigned int flags = 0;
attr.size = sizeof(attr);
attr.sched_flags = 0;
attr.sched_nice = 0;
attr.sched_priority = 0;
attr.sched_policy = SCHED_DEADLINE;
attr.sched_runtime = runtime;
attr.sched_deadline = deadline;
attr.sched_period = period;
if (sched_setattr(0, &attr, flags) < 0 ) {
perror("[SCHED] eNB tx thread: sched_setattr failed\n");
exit(1);
}
#else //LOW_LATENCY
int policy, s, j;
struct sched_param sparam;
char cpu_affinity[1024];
cpu_set_t cpuset;
/* Set affinity mask to include CPUs 1 to MAX_CPUS */
/* CPU 0 is reserved for UHD threads */
/* CPU 1 is reserved for all RX_TX threads */
/* Enable CPU Affinity only if number of CPUs >2 */
CPU_ZERO(&cpuset);
#ifdef CPU_AFFINITY
if (get_nprocs() > 2)
{
if (affinity == 0)
CPU_SET(0,&cpuset);
else
for (j = 1; j < get_nprocs(); j++)
CPU_SET(j, &cpuset);
s = pthread_setaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset);
if (s != 0)
{
perror( "pthread_setaffinity_np");
exit_fun("Error setting processor affinity");
}
}
#endif //CPU_AFFINITY
/* Check the actual affinity mask assigned to the thread */
s = pthread_getaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset);
if (s != 0) {
perror( "pthread_getaffinity_np");
exit_fun("Error getting processor affinity ");
}
memset(cpu_affinity,0,sizeof(cpu_affinity));
for (j = 0; j < CPU_SETSIZE; j++)
if (CPU_ISSET(j, &cpuset)) {
char temp[1024];
sprintf (temp, " CPU_%d", j);
strcat(cpu_affinity, temp);
}
memset(&sparam, 0, sizeof(sparam));
sparam.sched_priority = sched_get_priority_max(SCHED_FIFO);
policy = SCHED_FIFO ;
s = pthread_setschedparam(pthread_self(), policy, &sparam);
if (s != 0) {
perror("pthread_setschedparam : ");
exit_fun("Error setting thread priority");
}
s = pthread_getschedparam(pthread_self(), &policy, &sparam);
if (s != 0) {
perror("pthread_getschedparam : ");
exit_fun("Error getting thread priority");
}
LOG_I(HW, "[SCHED][eNB] %s started on CPU %d TID %ld, sched_policy = %s , priority = %d, CPU Affinity=%s \n",thread_name,sched_getcpu(),gettid(),
(policy == SCHED_FIFO) ? "SCHED_FIFO" :
(policy == SCHED_RR) ? "SCHED_RR" :
(policy == SCHED_OTHER) ? "SCHED_OTHER" :
"???",
sparam.sched_priority, cpu_affinity );
#endif //LOW_LATENCY
mlockall(MCL_CURRENT | MCL_FUTURE);
}
static inline void wait_sync(char *thread_name) {
printf( "waiting for sync (%s)\n",thread_name);
pthread_mutex_lock( &sync_mutex );
while (sync_var<0)
pthread_cond_wait( &sync_cond, &sync_mutex );
pthread_mutex_unlock(&sync_mutex);
printf( "got sync (%s)\n", thread_name);
}
void do_OFDM_mod_rt(int subframe,PHY_VARS_eNB_NB_IoT *phy_vars_eNB)
{
int CC_id = phy_vars_eNB->proc.CC_id;
unsigned int aa,slot_offset;
//int dummy_tx_b[7680*4] __attribute__((aligned(32)));
int i, tx_offset;
//int slot_sizeF = (phy_vars_eNB->frame_parms.ofdm_symbol_size)* ((phy_vars_eNB->frame_parms.Ncp==1) ? 6 : 7);
int len;
//int slot_offset_F = (subframe<<1)*slot_sizeF;
slot_offset = subframe*phy_vars_eNB->frame_parms.samples_per_tti;
if ((subframe_select(&phy_vars_eNB->frame_parms,subframe)==SF_DL)||
((subframe_select(&phy_vars_eNB->frame_parms,subframe)==SF_S))) {
// LOG_D(HW,"Frame %d: Generating slot %d\n",frame,next_slot);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_ENB_OFDM_MODULATION,1);
do_OFDM_mod_symbol(&phy_vars_eNB->common_vars,
0,
subframe<<1,
&phy_vars_eNB->frame_parms,
phy_vars_eNB->do_precoding);
// if S-subframe generate first slot only
if (subframe_select(&phy_vars_eNB->frame_parms,subframe) == SF_DL) {
do_OFDM_mod_symbol(&phy_vars_eNB->common_vars,
0,
1+(subframe<<1),
&phy_vars_eNB->frame_parms,
phy_vars_eNB->do_precoding);
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_ENB_OFDM_MODULATION,0);
/*
for (aa=0; aa<phy_vars_eNB->frame_parms.nb_antennas_tx; aa++) {
if (phy_vars_eNB->frame_parms.Ncp == EXTENDED) {
PHY_ofdm_mod(&phy_vars_eNB->common_vars.txdataF[0][aa][slot_offset_F],
dummy_tx_b,
phy_vars_eNB->frame_parms.ofdm_symbol_size,
6,
phy_vars_eNB->frame_parms.nb_prefix_samples,
CYCLIC_PREFIX);
if (subframe_select(&phy_vars_eNB->frame_parms,subframe) == SF_DL)
PHY_ofdm_mod(&phy_vars_eNB->common_vars.txdataF[0][aa][slot_offset_F+slot_sizeF],
dummy_tx_b+(phy_vars_eNB->frame_parms.samples_per_tti>>1),
phy_vars_eNB->frame_parms.ofdm_symbol_size,
6,
phy_vars_eNB->frame_parms.nb_prefix_samples,
CYCLIC_PREFIX);
} else {
normal_prefix_mod(&phy_vars_eNB->common_vars.txdataF[0][aa][slot_offset_F],
dummy_tx_b,
7,
&(phy_vars_eNB->frame_parms));
// if S-subframe generate first slot only
if (subframe_select(&phy_vars_eNB->frame_parms,subframe) == SF_DL)
normal_prefix_mod(&phy_vars_eNB->common_vars.txdataF[0][aa][slot_offset_F+slot_sizeF],
dummy_tx_b+(phy_vars_eNB->frame_parms.samples_per_tti>>1),
7,
&(phy_vars_eNB->frame_parms));
}
} */
for (aa=0; aa<phy_vars_eNB->frame_parms.nb_antennas_tx; aa++) {
// if S-subframe generate first slot only
if (subframe_select(&phy_vars_eNB->frame_parms,subframe) == SF_S)
len = phy_vars_eNB->frame_parms.samples_per_tti>>1;
else
len = phy_vars_eNB->frame_parms.samples_per_tti;
/*
for (i=0;i<len;i+=4) {
dummy_tx_b[i] = 0x100;
dummy_tx_b[i+1] = 0x01000000;
dummy_tx_b[i+2] = 0xff00;
dummy_tx_b[i+3] = 0xff000000;
}*/
for (i=0; i<len; i++) {
tx_offset = (int)slot_offset+time_offset[aa]+i;
if (tx_offset<0)
tx_offset += LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*phy_vars_eNB->frame_parms.samples_per_tti;
if (tx_offset>=(LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*phy_vars_eNB->frame_parms.samples_per_tti))
tx_offset -= LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*phy_vars_eNB->frame_parms.samples_per_tti;
/* ((short*)&phy_vars_eNB->common_vars.txdata[0][aa][tx_offset])[0] = ((short*)dummy_tx_b)[2*i]<<openair0_cfg[0].iq_txshift;
((short*)&phy_vars_eNB->common_vars.txdata[0][aa][tx_offset])[1] = ((short*)dummy_tx_b)[2*i+1]<<openair0_cfg[0].iq_txshift; */
((short*)&phy_vars_eNB->common_vars.txdata[0][aa][tx_offset])[0] = ((short*)&phy_vars_eNB->common_vars.txdata[0][aa][tx_offset])[0]<<openair0_cfg[CC_id].iq_txshift;
((short*)&phy_vars_eNB->common_vars.txdata[0][aa][tx_offset])[1] = ((short*)&phy_vars_eNB->common_vars.txdata[0][aa][tx_offset])[1]<<openair0_cfg[CC_id].iq_txshift;
}
// if S-subframe switch to RX in second subframe
if (subframe_select(&phy_vars_eNB->frame_parms,subframe) == SF_S) {
for (i=0; i<len; i++) {
phy_vars_eNB->common_vars.txdata[0][aa][tx_offset++] = 0x00010001;
}
}
if ((((phy_vars_eNB->frame_parms.tdd_config==0) ||
(phy_vars_eNB->frame_parms.tdd_config==1) ||
(phy_vars_eNB->frame_parms.tdd_config==2) ||
(phy_vars_eNB->frame_parms.tdd_config==6)) &&
(subframe==0)) || (subframe==5)) {
// turn on tx switch N_TA_offset before
//LOG_D(HW,"subframe %d, time to switch to tx (N_TA_offset %d, slot_offset %d) \n",subframe,phy_vars_eNB->N_TA_offset,slot_offset);
for (i=0; i<phy_vars_eNB->N_TA_offset; i++) {
tx_offset = (int)slot_offset+time_offset[aa]+i-phy_vars_eNB->N_TA_offset;
if (tx_offset<0)
tx_offset += LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*phy_vars_eNB->frame_parms.samples_per_tti;
if (tx_offset>=(LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*phy_vars_eNB->frame_parms.samples_per_tti))
tx_offset -= LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*phy_vars_eNB->frame_parms.samples_per_tti;
phy_vars_eNB->common_vars.txdata[0][aa][tx_offset] = 0x00000000;
}
}
}
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_ENB_SFGEN , 0 );
}
void tx_fh_if5(PHY_VARS_eNB_NB_IoT *eNB,L1_rxtx_proc_t *proc) {
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TRX_TST, proc->timestamp_tx&0xffffffff );
if ((eNB->frame_parms.frame_type==FDD) ||
((eNB->frame_parms.frame_type==TDD) &&
(subframe_select(&eNB->frame_parms,proc->subframe_tx) != SF_UL)))
send_IF5(eNB, proc->timestamp_tx, proc->subframe_tx, &seqno, IF5_RRH_GW_DL);
}
void tx_fh_if5_mobipass(PHY_VARS_eNB_NB_IoT *eNB,L1_rxtx_proc_t *proc) {
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TRX_TST, proc->timestamp_tx&0xffffffff );
if ((eNB->frame_parms.frame_type==FDD) ||
((eNB->frame_parms.frame_type==TDD) &&
(subframe_select(&eNB->frame_parms,proc->subframe_tx) != SF_UL)))
send_IF5(eNB, proc->timestamp_tx, proc->subframe_tx, &seqno, IF5_MOBIPASS);
}
void tx_fh_if4p5(PHY_VARS_eNB_NB_IoT *eNB,L1_rxtx_proc_t *proc) {
if ((eNB->frame_parms.frame_type==FDD) ||
((eNB->frame_parms.frame_type==TDD) &&
(subframe_select(&eNB->frame_parms,proc->subframe_tx) != SF_UL)))
send_IF4p5(eNB,proc->frame_tx,proc->subframe_tx, IF4p5_PDLFFT, 0);
}
void proc_tx_high0(PHY_VARS_eNB_NB_IoT *eNB,
L1_rxtx_proc_t *proc,
relaying_type_t r_type,
PHY_VARS_RN *rn) {
int offset = proc == &eNB->proc.proc_rxtx[0] ? 0 : 1;
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_TX0_ENB+offset, proc->frame_tx );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_SUBFRAME_NUMBER_TX0_ENB+offset, proc->subframe_tx );
phy_procedures_eNB_TX(eNB,proc,r_type,rn,1,1);
/* we're done, let the next one proceed */
if (pthread_mutex_lock(&sync_phy_proc.mutex_phy_proc_tx) != 0) {
LOG_E(PHY, "[SCHED][eNB] error locking PHY proc mutex for eNB TX proc\n");
exit_fun("nothing to add");
}
sync_phy_proc.phy_proc_CC_id++;
sync_phy_proc.phy_proc_CC_id %= MAX_NUM_CCs;
pthread_cond_broadcast(&sync_phy_proc.cond_phy_proc_tx);
if (pthread_mutex_unlock(&sync_phy_proc.mutex_phy_proc_tx) != 0) {
LOG_E(PHY, "[SCHED][eNB] error unlocking PHY proc mutex for eNB TX proc\n");
exit_fun("nothing to add");
}
}
void proc_tx_high(PHY_VARS_eNB_NB_IoT *eNB,
L1_rxtx_proc_t *proc,
relaying_type_t r_type,
PHY_VARS_RN *rn) {
// do PHY high
proc_tx_high0(eNB,proc,r_type,rn);
// if TX fronthaul go ahead
if (eNB->tx_fh) eNB->tx_fh(eNB,proc);
}
void proc_tx_full(PHY_VARS_eNB_NB_IoT *eNB,
L1_rxtx_proc_t *proc,
relaying_type_t r_type,
PHY_VARS_RN *rn) {
// do PHY high
proc_tx_high0(eNB,proc,r_type,rn);
// do OFDM modulation
do_OFDM_mod_rt(proc->subframe_tx,eNB);
// if TX fronthaul go ahead
if (eNB->tx_fh) eNB->tx_fh(eNB,proc);
/*
if (proc->frame_tx>1000) {
write_output("/tmp/txsig0.m","txs0", &eNB->common_vars.txdata[eNB->Mod_id][0][0], eNB->frame_parms.samples_per_tti*10,1,1);
write_output("/tmp/txsigF0.m","txsF0", &eNB->common_vars.txdataF[eNB->Mod_id][0][0],eNB->frame_parms.symbols_per_tti*eNB->frame_parms.ofdm_symbol_size*10,1,1);
write_output("/tmp/txsig1.m","txs1", &eNB->common_vars.txdata[eNB->Mod_id][1][0], eNB->frame_parms.samples_per_tti*10,1,1);
write_output("/tmp/txsigF1.m","txsF1", &eNB->common_vars.txdataF[eNB->Mod_id][1][0],eNB->frame_parms.symbols_per_tti*eNB->frame_parms.ofdm_symbol_size*10,1,1);
if (transmission_mode == 7)
write_output("/tmp/txsigF5.m","txsF5", &eNB->common_vars.txdataF[eNB->Mod_id][5][0],eNB->frame_parms.symbols_per_tti*eNB->frame_parms.ofdm_symbol_size*10,1,1);
exit_fun("");
}
*/
}
void proc_tx_rru_if4p5(PHY_VARS_eNB_NB_IoT *eNB,
L1_rxtx_proc_t *proc,
relaying_type_t r_type,
PHY_VARS_RN *rn) {
uint32_t symbol_number=0;
uint32_t symbol_mask, symbol_mask_full;
uint16_t packet_type;
int offset = proc == &eNB->proc.proc_rxtx[0] ? 0 : 1;
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_TX0_ENB+offset, proc->frame_tx );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_SUBFRAME_NUMBER_TX0_ENB+offset, proc->subframe_tx );
/// **** recv_IF4 of txdataF from RCC **** ///
symbol_number = 0;
symbol_mask = 0;
symbol_mask_full = (1<<eNB->frame_parms.symbols_per_tti)-1;
do {
recv_IF4p5(eNB, &proc->frame_tx, &proc->subframe_tx, &packet_type, &symbol_number);
symbol_mask = symbol_mask | (1<<symbol_number);
} while (symbol_mask != symbol_mask_full);
do_OFDM_mod_rt(proc->subframe_tx, eNB);
}
void proc_tx_rru_if5(PHY_VARS_eNB_NB_IoT *eNB,L1_rxtx_proc_t *proc) {
int offset = proc == &eNB->proc.proc_rxtx[0] ? 0 : 1;
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_TX0_ENB+offset, proc->frame_tx );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_SUBFRAME_NUMBER_TX0_ENB+offset, proc->subframe_tx );
/// **** recv_IF5 of txdata from BBU **** ///
recv_IF5(eNB, &proc->timestamp_tx, proc->subframe_tx, IF5_RRH_GW_DL);
}
int wait_CCs(L1_rxtx_proc_t *proc) {
struct timespec wait;
wait.tv_sec=0;
wait.tv_nsec=5000000L;
if (pthread_mutex_timedlock(&sync_phy_proc.mutex_phy_proc_tx,&wait) != 0) {
LOG_E(PHY, "[SCHED][eNB] error locking PHY proc mutex for eNB TX\n");
exit_fun("nothing to add");
return(-1);
}
// wait for our turn or oai_exit
while (sync_phy_proc.phy_proc_CC_id != proc->CC_id && !oai_exit) {
pthread_cond_wait(&sync_phy_proc.cond_phy_proc_tx,
&sync_phy_proc.mutex_phy_proc_tx);
}
if (pthread_mutex_unlock(&sync_phy_proc.mutex_phy_proc_tx) != 0) {
LOG_E(PHY, "[SCHED][eNB] error unlocking PHY proc mutex for eNB TX\n");
exit_fun("nothing to add");
return(-1);
}
return(0);
}
/*NB-IoT rxtx
*
* IMPORTANT When we run the rxtx thread for NB-IoT we should not run at the same time otherwise we fill the same buffers in PHY_Vars_eNB
*
* For the moment the NB-IoT implementation foresees a single thread implementation
* */
static inline int rxtx_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,L1_rxtx_proc_t *proc, char *thread_name) {
///////////////////////////////////////////////////// Remove comments after testing phase 1 //////////////////////////
//Allocate memory for the structures used by PHY and MAC
///////////////////////////////////// for NB-IoT testing ////////////////////////
/// UL_IND_t *UL_INFO;
/// Sched_Rsp_t *Sched_Rsp;
/// UL_INFO = (UL_IND_t*) malloc(sizeof(UL_IND_t));
/// Sched_Rsp = (Sched_Rsp_t*) malloc(sizeof(Sched_Rsp_t));
/////////////////////////////////////// END ///////////////////////////////////////////
//start_meas(&softmodem_stats_rxtx_sf);
// ****************************************
// Common RX procedures subframe n
///////////////////////////////////// for NB-IoT testing ////////////////////////
/// if ((eNB->do_prach)&&((eNB->node_function != NGFI_RCC_IF4p5_NB_IoT)))
/// eNB->do_prach(eNB,proc->frame_rx,proc->subframe_rx);
///////////////////////////////////////// END //////////////////////////////////////
/*UE-specific RX processing for subframe n*/
/*
* stored the Upink information in UL_info struct, process it and made it into FAPI style,
*/
/// phy_procedures_eNB_uespec_RX_NB_IoT(eNB,proc,UL_INFO);
/*
* send the UL_Indication to higher layer that also provide a tick to the scheduler_dlsch_ulsch
* (on its turn the scheduler will trigger the phy_procedure_eNB_TX through schedule_responce function
*/
/// if(if_inst->UL_indication) if_inst->UL_indication(UL_INFO);
if (oai_exit) return(-1);
if (release_thread(&proc->mutex_rxtx,&proc->instance_cnt_rxtx,thread_name)<0) return(-1);
//stop_meas( &softmodem_stats_rxtx_sf );
return(0);
}
static inline int rxtx(PHY_VARS_eNB_NB_IoT *eNB,L1_rxtx_proc_t *proc, char *thread_name) {
///start_meas(&softmodem_stats_rxtx_sf);
// ****************************************
// Common RX procedures subframe n
if ((eNB->do_prach)&&((eNB->node_function != NGFI_RCC_IF4p5)))
eNB->do_prach(eNB,proc->frame_rx,proc->subframe_rx);
phy_procedures_eNB_common_RX(eNB,proc);
// UE-specific RX processing for subframe n
///////////////////////////////////// for NB-IoT testing ////////////////////////
// for NB-IoT testing // activating only TX part
if (eNB->proc_uespec_rx) eNB->proc_uespec_rx(eNB, proc, no_relay );
////////////////////////////////////END///////////////////////
//npusch_procedures(eNB,proc,data_or_control);
//fill_rx_indication(eNB,i,frame,subframe);
//////////////////////////////////// for IF Module/scheduler testing
pthread_mutex_lock(&eNB->UL_INFO_mutex);
eNB->UL_INFO.frame = proc->frame_rx;
eNB->UL_INFO.subframe = proc->subframe_rx;
eNB->UL_INFO.module_id = eNB->Mod_id;
eNB->UL_INFO.CC_id = eNB->CC_id;
eNB->UL_INFO.hypersfn = proc->HFN;
eNB->if_inst->UL_indication(&eNB->UL_INFO);
pthread_mutex_unlock(&eNB->UL_INFO_mutex);
//LOG_I(PHY,"After UL_indication\n");
// *****************************************
// TX processing for subframe n+4
// run PHY TX procedures the one after the other for all CCs to avoid race conditions
// (may be relaxed in the future for performance reasons)
// *****************************************
//if (wait_CCs(proc)<0) return(-1);
if (oai_exit) return(-1);
if (eNB->proc_tx) eNB->proc_tx(eNB, proc, no_relay, NULL );
if (release_thread(&proc->mutex_rxtx,&proc->instance_cnt_rxtx,thread_name)<0) return(-1);
/// stop_meas( &softmodem_stats_rxtx_sf );
return(0);
}
/*!
* \brief The RX UE-specific and TX thread of eNB.
* \param param is a \ref eNB_proc_t structure which contains the info what to process.
* \returns a pointer to an int. The storage is not on the heap and must not be freed.
*/
static void* eNB_thread_rxtx( void* param ) {
static int eNB_thread_rxtx_status;
L1_rxtx_proc_t *proc = (L1_rxtx_proc_t*)param;
///eNB_rxtx_proc_NB_IoT_t *proc_NB_IoT = (eNB_rxtx_proc_NB_IoT_t*)param; // to remove when eNB_thread_rxtx_status is duplicated for NB-IoT
PHY_VARS_eNB_NB_IoT *eNB = PHY_vars_eNB_g[0][proc->CC_id];
///PHY_VARS_eNB_NB_IoT *eNB_NB_IoT = PHY_vars_eNB_NB_IoT_g[0][proc_NB_IoT->CC_id]; // to remove when eNB_thread_rxtx_status is duplicated for NB-IoT
char thread_name[100];
// set default return value
eNB_thread_rxtx_status = 0;
sprintf(thread_name,"RXn_TXnp4_%d\n",&eNB->proc.proc_rxtx[0] == proc ? 0 : 1);
thread_top_init(thread_name,1,850000L,1000000L,2000000L);
while (!oai_exit) {
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_PROC_RXTX0+(proc->subframe_rx&1), 0 );
if (wait_on_condition(&proc->mutex_rxtx,&proc->cond_rxtx,&proc->instance_cnt_rxtx,thread_name)<0) break;
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_PROC_RXTX0+(proc->subframe_rx&1), 1 );
if (oai_exit) break;
if (eNB->CC_id==0)
{
//#ifdef NB_IOT
// if(rxtx_NB_IoT(eNB,proc,thread_name)<0) break;
//#else
if (rxtx(eNB,proc,thread_name) < 0) break;
//#endif
}
} // while !oai_exit
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_PROC_RXTX0+(proc->subframe_rx&1), 0 );
printf( "Exiting eNB thread RXn_TXnp4\n");
eNB_thread_rxtx_status = 0;
return &eNB_thread_rxtx_status;
}
#if defined(ENABLE_ITTI) && defined(ENABLE_USE_MME)
/* Wait for eNB application initialization to be complete (eNB registration to MME) */
static void wait_system_ready (char *message, volatile int *start_flag) {
static char *indicator[] = {". ", ".. ", "... ", ".... ", ".....",
" ....", " ...", " ..", " .", " "};
int i = 0;
while ((!oai_exit) && (*start_flag == 0)) {
LOG_N(EMU, message, indicator[i]);
fflush(stdout);
i = (i + 1) % (sizeof(indicator) / sizeof(indicator[0]));
usleep(200000);
}
LOG_D(EMU,"\n");
}
#endif
// asynchronous UL with IF5 (RCC,RAU,eNodeB_BBU)
void fh_if5_asynch_UL(PHY_VARS_eNB_NB_IoT *eNB,int *frame,int *subframe) {
eNB_proc_t *proc = &eNB->proc;
LTE_DL_FRAME_PARMS *fp = &eNB->frame_parms;
recv_IF5(eNB, &proc->timestamp_rx, *subframe, IF5_MOBIPASS);
int offset_mobipass = 40120;
pthread_mutex_lock(&proc->mutex_asynch_rxtx);
proc->subframe_rx = ((proc->timestamp_rx-offset_mobipass)/fp->samples_per_tti)%10;
proc->frame_rx = ((proc->timestamp_rx-offset_mobipass)/(fp->samples_per_tti*10))&1023;
if (proc->first_rx == 1) {
proc->first_rx =2;
*subframe = proc->subframe_rx;
*frame = proc->frame_rx;
LOG_E(PHY,"[Mobipass]timestamp_rx:%"PRId64", frame_rx %d, subframe: %d\n",proc->timestamp_rx,proc->frame_rx,proc->subframe_rx);
}
else {
if (proc->subframe_rx != *subframe) {
proc->first_rx++;
LOG_E(PHY,"[Mobipass]timestamp:%"PRId64", subframe_rx %d is not what we expect %d, first_rx:%d\n",proc->timestamp_rx, proc->subframe_rx,*subframe, proc->first_rx);
//exit_fun("Exiting");
}
if (proc->frame_rx != *frame) {
proc->first_rx++;
LOG_E(PHY,"[Mobipass]timestamp:%"PRId64", frame_rx %d is not what we expect %d, first_rx:%d\n",proc->timestamp_rx,proc->frame_rx,*frame, proc->first_rx);
// exit_fun("Exiting");
}
// temporary solution
*subframe = proc->subframe_rx;
*frame = proc->frame_rx;
}
pthread_mutex_unlock(&proc->mutex_asynch_rxtx);
} // eNodeB_3GPP_BBU
// asynchronous UL with IF4p5 (RCC,RAU,eNodeB_BBU)
void fh_if4p5_asynch_UL(PHY_VARS_eNB_NB_IoT *eNB,int *frame,int *subframe) {
LTE_DL_FRAME_PARMS *fp = &eNB->frame_parms;
eNB_proc_t *proc = &eNB->proc;
uint16_t packet_type;
uint32_t symbol_number,symbol_mask,symbol_mask_full,prach_rx;
symbol_number = 0;
symbol_mask = 0;
symbol_mask_full = (1<<fp->symbols_per_tti)-1;
prach_rx = 0;
do { // Blocking, we need a timeout on this !!!!!!!!!!!!!!!!!!!!!!!
recv_IF4p5(eNB, &proc->frame_rx, &proc->subframe_rx, &packet_type, &symbol_number);
if (proc->first_rx != 0) {
*frame = proc->frame_rx;
*subframe = proc->subframe_rx;
proc->first_rx--;
}
else {
if (proc->frame_rx != *frame) {
LOG_E(PHY,"fh_if4p5_asynch_UL: frame_rx %d is not what we expect %d\n",proc->frame_rx,*frame);
exit_fun("Exiting");
}
if (proc->subframe_rx != *subframe) {
LOG_E(PHY,"fh_if4p5_asynch_UL: subframe_rx %d is not what we expect %d\n",proc->subframe_rx,*subframe);
exit_fun("Exiting");
}
}
if (packet_type == IF4p5_PULFFT) {
symbol_mask = symbol_mask | (1<<symbol_number);
prach_rx = (is_prach_subframe(fp, proc->frame_rx, proc->subframe_rx)>0) ? 1 : 0;
} else if (packet_type == IF4p5_PRACH) {
prach_rx = 0;
}
} while( (symbol_mask != symbol_mask_full) || (prach_rx == 1));
}
void fh_if5_asynch_DL(PHY_VARS_eNB_NB_IoT *eNB,int *frame,int *subframe) {
LTE_DL_FRAME_PARMS *fp = &eNB->frame_parms;
eNB_proc_t *proc = &eNB->proc;
int subframe_tx,frame_tx;
openair0_timestamp timestamp_tx;
recv_IF5(eNB, &timestamp_tx, *subframe, IF5_RRH_GW_DL);
clock_gettime( CLOCK_MONOTONIC, &end_fh);
end_fh_sf = *subframe;
recv_if_count = recv_if_count + 1;
LOG_D(HW,"[From SF %d to SF %d] RTT_FH: %"PRId64"\n", start_fh_prev_sf, end_fh_sf, clock_difftime_ns(start_fh_prev, end_fh));
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_RECV_IF5, 0 );
subframe_tx = (timestamp_tx/fp->samples_per_tti)%10;
frame_tx = (timestamp_tx/(fp->samples_per_tti*10))&1023;
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_TX0_ENB, frame_tx );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_SUBFRAME_NUMBER_TX0_ENB, subframe_tx );
if (proc->first_tx != 0) {
*subframe = subframe_tx;
*frame = frame_tx;
proc->first_tx = 0;
}
else {
if (subframe_tx != *subframe) {
LOG_E(PHY,"fh_if5_asynch_DL: subframe_tx %d is not what we expect %d\n",subframe_tx,*subframe);
exit_fun("Exiting");
}
if (frame_tx != *frame) {
LOG_E(PHY,"fh_if5_asynch_DL: frame_tx %d is not what we expect %d\n",frame_tx,*frame);
exit_fun("Exiting");
}
}
}
void fh_if4p5_asynch_DL(PHY_VARS_eNB_NB_IoT *eNB,int *frame,int *subframe) {
LTE_DL_FRAME_PARMS *fp = &eNB->frame_parms;
eNB_proc_t *proc = &eNB->proc;
uint16_t packet_type;
uint32_t symbol_number,symbol_mask_full;
int subframe_tx,frame_tx;
symbol_number = 0;
LOG_D(PHY,"fh_asynch_DL_IF4p5: in, frame %d, subframe %d\n",*frame,*subframe);
// correct for TDD
if (fp->frame_type == TDD) {
while (subframe_select(fp,*subframe) == SF_UL) {
*subframe=*subframe+1;
if (*subframe==10) {
*subframe=0;
*frame=*frame+1;
}
}
}
LOG_D(PHY,"fh_asynch_DL_IF4p5: after TDD correction, frame %d, subframe %d\n",*frame,*subframe);
symbol_mask_full = ((subframe_select(fp,*subframe) == SF_S) ? (1<<fp->dl_symbols_in_S_subframe) : (1<<fp->symbols_per_tti))-1;
do { // Blocking, we need a timeout on this !!!!!!!!!!!!!!!!!!!!!!!
recv_IF4p5(eNB, &frame_tx, &subframe_tx, &packet_type, &symbol_number);
if (proc->first_tx != 0) {
*frame = frame_tx;
*subframe = subframe_tx;
proc->first_tx = 0;
proc->frame_offset = frame_tx - proc->frame_tx;
symbol_mask_full = ((subframe_select(fp,*subframe) == SF_S) ? (1<<fp->dl_symbols_in_S_subframe) : (1<<fp->symbols_per_tti))-1;
}
else {
if (frame_tx != *frame) {
LOG_E(PHY,"fh_if4p5_asynch_DL: frame_tx %d is not what we expect %d\n",frame_tx,*frame);
exit_fun("Exiting");
}
if (subframe_tx != *subframe) {
LOG_E(PHY,"fh_if4p5_asynch_DL: (frame %d) subframe_tx %d is not what we expect %d\n",frame_tx,subframe_tx,*subframe);
//*subframe = subframe_tx;
exit_fun("Exiting");
}
}
if (packet_type == IF4p5_PDLFFT) {
proc->symbol_mask[subframe_tx] =proc->symbol_mask[subframe_tx] | (1<<symbol_number);
}
else {
LOG_E(PHY,"Illegal IF4p5 packet type (should only be IF4p5_PDLFFT%d\n",packet_type);
exit_fun("Exiting");
}
} while (proc->symbol_mask[*subframe] != symbol_mask_full);
*frame = frame_tx;
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_TX0_ENB, frame_tx );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_SUBFRAME_NUMBER_TX0_ENB, subframe_tx );
// intialize this to zero after we're done with the subframe
proc->symbol_mask[*subframe] = 0;
do_OFDM_mod_rt(*subframe, eNB);
}
/*!
* \brief The Asynchronous RX/TX FH thread of RAU/RCC/eNB/RRU.
* This handles the RX FH for an asynchronous RRU/UE
* \param param is a \ref eNB_proc_t structure which contains the info what to process.
* \returns a pointer to an int. The storage is not on the heap and must not be freed.
*/
static void* eNB_thread_asynch_rxtx( void* param ) {
static int eNB_thread_asynch_rxtx_status;
eNB_proc_t *proc = (eNB_proc_t*)param;
PHY_VARS_eNB_NB_IoT *eNB = PHY_vars_eNB_g[0][proc->CC_id];
int subframe=0, frame=0;
thread_top_init("thread_asynch",1,870000L,1000000L,1000000L);
// wait for top-level synchronization and do one acquisition to get timestamp for setting frame/subframe
wait_sync("thread_asynch");
// wait for top-level synchronization and do one acquisition to get timestamp for setting frame/subframe
printf( "waiting for devices (eNB_thread_asynch_rx)\n");
wait_on_condition(&proc->mutex_asynch_rxtx,&proc->cond_asynch_rxtx,&proc->instance_cnt_asynch_rxtx,"thread_asynch");
printf( "devices ok (eNB_thread_asynch_rx)\n");
while (!oai_exit) {
if (oai_exit) break;
if (subframe==9) {
subframe=0;
frame++;
frame&=1023;
} else {
subframe++;
}
if (eNB->fh_asynch) eNB->fh_asynch(eNB,&frame,&subframe);
else AssertFatal(1==0, "Unknown eNB->node_function %d",eNB->node_function);
}
eNB_thread_asynch_rxtx_status=0;
return(&eNB_thread_asynch_rxtx_status);
}
void rx_rf(PHY_VARS_eNB_NB_IoT *eNB,int *frame,int *subframe) {
eNB_proc_t *proc = &eNB->proc;
LTE_DL_FRAME_PARMS *fp = &eNB->frame_parms;
void *rxp[fp->nb_antennas_rx],*txp[fp->nb_antennas_tx];
unsigned int rxs,txs;
int i;
int tx_sfoffset = (eNB->single_thread_flag == 1) ? 3 : 2;
openair0_timestamp ts,old_ts;
if (proc->first_rx==0) {
// Transmit TX buffer based on timestamp from RX
// printf("trx_write -> USRP TS %llu (sf %d)\n", (proc->timestamp_rx+(3*fp->samples_per_tti)),(proc->subframe_rx+2)%10);
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TRX_TST, (proc->timestamp_rx+(tx_sfoffset*fp->samples_per_tti)-openair0_cfg[0].tx_sample_advance)&0xffffffff );
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 1 );
// prepare tx buffer pointers
lte_subframe_t SF_type = subframe_select(fp,(proc->subframe_rx+tx_sfoffset)%10);
lte_subframe_t prevSF_type = subframe_select(fp,(proc->subframe_rx+tx_sfoffset+9)%10);
lte_subframe_t nextSF_type = subframe_select(fp,(proc->subframe_rx+tx_sfoffset+1)%10);
if ((SF_type == SF_DL) ||
(SF_type == SF_S)) {
for (i=0; i<fp->nb_antennas_tx; i++)
txp[i] = (void*)&eNB->common_vars.txdata[0][i][((proc->subframe_rx+tx_sfoffset)%10)*fp->samples_per_tti];
int siglen=fp->samples_per_tti,flags=1;
if (SF_type == SF_S) {
siglen = fp->dl_symbols_in_S_subframe*(fp->ofdm_symbol_size+fp->nb_prefix_samples0);
flags=3; // end of burst
}
if ((fp->frame_type == TDD) &&
(SF_type == SF_DL)&&
(prevSF_type == SF_UL) &&
(nextSF_type == SF_DL))
flags = 2; // start of burst
if ((fp->frame_type == TDD) &&
(SF_type == SF_DL)&&
(prevSF_type == SF_UL) &&
(nextSF_type == SF_UL))
flags = 4; // start of burst and end of burst (only one DL SF between two UL)
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 1 );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TRX_WRITE_FLAGS,flags);
txs = eNB->rfdevice.trx_write_func(&eNB->rfdevice,
proc->timestamp_rx+eNB->ts_offset+(tx_sfoffset*fp->samples_per_tti)-openair0_cfg[0].tx_sample_advance,
txp,
siglen,
fp->nb_antennas_tx,
flags);
clock_gettime( CLOCK_MONOTONIC, &end_rf);
end_rf_ts = proc->timestamp_rx+eNB->ts_offset+(tx_sfoffset*fp->samples_per_tti)-openair0_cfg[0].tx_sample_advance;
if (recv_if_count != 0 ) {
recv_if_count = recv_if_count-1;
LOG_D(HW,"[From Timestamp %"PRId64" to Timestamp %"PRId64"] RTT_RF: %"PRId64"; RTT_RF\n", start_rf_prev_ts, end_rf_ts, clock_difftime_ns(start_rf_prev, end_rf));
LOG_D(HW,"[From Timestamp %"PRId64" to Timestamp %"PRId64"] RTT_RF: %"PRId64"; RTT_RF\n",start_rf_prev2_ts, end_rf_ts, clock_difftime_ns(start_rf_prev2, end_rf));
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 0 );
if (txs != siglen) {
LOG_E(PHY,"TX : Timeout (sent %d/%d)\n",txs, fp->samples_per_tti);
exit_fun( "problem transmitting samples" );
}
}
}
for (i=0; i<fp->nb_antennas_rx; i++)
rxp[i] = (void*)&eNB->common_vars.rxdata[0][i][*subframe*fp->samples_per_tti];
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ, 1 );
old_ts = proc->timestamp_rx;
rxs = eNB->rfdevice.trx_read_func(&eNB->rfdevice,
&ts,
rxp,
fp->samples_per_tti,
fp->nb_antennas_rx);
start_rf_prev2= start_rf_prev;
start_rf_prev2_ts= start_rf_prev_ts;
start_rf_prev = start_rf_new;
start_rf_prev_ts = start_rf_new_ts;
clock_gettime( CLOCK_MONOTONIC, &start_rf_new);
start_rf_new_ts = ts;
LOG_D(PHY,"rx_rf: first_rx %d received ts %"PRId64" (sptti %d)\n",proc->first_rx,ts,fp->samples_per_tti);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ, 0 );
proc->timestamp_rx = ts-eNB->ts_offset;
if (rxs != fp->samples_per_tti)
LOG_E(PHY,"rx_rf: Asked for %d samples, got %d from USRP\n",fp->samples_per_tti,rxs);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ, 0 );
if (proc->first_rx == 1) {
eNB->ts_offset = proc->timestamp_rx;
proc->timestamp_rx=0;
}
else {
if (proc->timestamp_rx - old_ts != fp->samples_per_tti) {
LOG_I(PHY,"rx_rf: rfdevice timing drift of %"PRId64" samples (ts_off %"PRId64")\n",proc->timestamp_rx - old_ts - fp->samples_per_tti,eNB->ts_offset);
eNB->ts_offset += (proc->timestamp_rx - old_ts - fp->samples_per_tti);
proc->timestamp_rx = ts-eNB->ts_offset;
}
}
proc->frame_rx = (proc->timestamp_rx / (fp->samples_per_tti*10))&1023;
proc->subframe_rx = (proc->timestamp_rx / fp->samples_per_tti)%10;
proc->frame_rx = (proc->frame_rx+proc->frame_offset)&1023;
proc->frame_tx = proc->frame_rx;
if (proc->subframe_rx > 5) proc->frame_tx=(proc->frame_tx+1)&1023;
// synchronize first reception to frame 0 subframe 0
proc->timestamp_tx = proc->timestamp_rx+(4*fp->samples_per_tti);
// printf("trx_read <- USRP TS %lu (offset %d sf %d, f %d, first_rx %d)\n", proc->timestamp_rx,eNB->ts_offset,proc->subframe_rx,proc->frame_rx,proc->first_rx);
if (proc->first_rx == 0) {
if (proc->subframe_rx != *subframe){
LOG_E(PHY,"rx_rf: Received Timestamp (%"PRId64") doesn't correspond to the time we think it is (proc->subframe_rx %d, subframe %d)\n",proc->timestamp_rx,proc->subframe_rx,*subframe);
exit_fun("Exiting");
}
int f2 = (*frame+proc->frame_offset)&1023;
if (proc->frame_rx != f2) {
LOG_E(PHY,"rx_rf: Received Timestamp (%"PRId64") doesn't correspond to the time we think it is (proc->frame_rx %d frame %d, frame_offset %d, f2 %d)\n",proc->timestamp_rx,proc->frame_rx,*frame,proc->frame_offset,f2);
exit_fun("Exiting");
}
} else {
proc->first_rx--;
*frame = proc->frame_rx;
*subframe = proc->subframe_rx;
}
//printf("timestamp_rx %lu, frame %d(%d), subframe %d(%d)\n",proc->timestamp_rx,proc->frame_rx,frame,proc->subframe_rx,subframe);
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TRX_TS, proc->timestamp_rx&0xffffffff );
if (rxs != fp->samples_per_tti)
exit_fun( "problem receiving samples" );
}
void rx_fh_if5(PHY_VARS_eNB_NB_IoT *eNB,int *frame, int *subframe) {
LTE_DL_FRAME_PARMS *fp = &eNB->frame_parms;
eNB_proc_t *proc = &eNB->proc;
recv_IF5(eNB, &proc->timestamp_rx, *subframe, IF5_RRH_GW_UL);
proc->frame_rx = (proc->timestamp_rx / (fp->samples_per_tti*10))&1023;
proc->subframe_rx = (proc->timestamp_rx / fp->samples_per_tti)%10;
if (proc->first_rx == 0) {
if (proc->subframe_rx != *subframe){
LOG_E(PHY,"rx_fh_if5: Received Timestamp doesn't correspond to the time we think it is (proc->subframe_rx %d, subframe %d)\n",proc->subframe_rx,*subframe);
exit_fun("Exiting");
}
if (proc->frame_rx != *frame) {
LOG_E(PHY,"rx_fh_if5: Received Timestamp doesn't correspond to the time we think it is (proc->frame_rx %d frame %d)\n",proc->frame_rx,*frame);
exit_fun("Exiting");
}
} else {
proc->first_rx--;
*frame = proc->frame_rx;
*subframe = proc->subframe_rx;
}
proc->timestamp_tx = proc->timestamp_rx + (4*fp->samples_per_tti);
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TRX_TS, proc->timestamp_rx&0xffffffff );
}
void rx_fh_if4p5(PHY_VARS_eNB_NB_IoT *eNB,int *frame,int *subframe) {
LTE_DL_FRAME_PARMS *fp = &eNB->frame_parms;
eNB_proc_t *proc = &eNB->proc;
int f,sf;
uint16_t packet_type;
uint32_t symbol_number=0;
uint32_t symbol_mask_full;
if ((fp->frame_type == TDD) && (subframe_select(fp,*subframe)==SF_S))
symbol_mask_full = (1<<fp->ul_symbols_in_S_subframe)-1;
else
symbol_mask_full = (1<<fp->symbols_per_tti)-1;
if (eNB->CC_id==1) LOG_I(PHY,"rx_fh_if4p5: frame %d, subframe %d\n",*frame,*subframe);
do { // Blocking, we need a timeout on this !!!!!!!!!!!!!!!!!!!!!!!
recv_IF4p5(eNB, &f, &sf, &packet_type, &symbol_number);
//proc->frame_rx = (proc->frame_rx + proc->frame_offset)&1023;
if (packet_type == IF4p5_PULFFT) {
LOG_D(PHY,"rx_fh_if4p5: frame %d, subframe %d, PULFFT symbol %d\n",f,sf,symbol_number);
proc->symbol_mask[sf] = proc->symbol_mask[sf] | (1<<symbol_number);
} else if (packet_type == IF4p5_PULTICK) {
if ((proc->first_rx==0) && (f!=*frame))
LOG_E(PHY,"rx_fh_if4p5: PULTICK received frame %d != expected %d\n",f,*frame);
if ((proc->first_rx==0) && (sf!=*subframe))
LOG_E(PHY,"rx_fh_if4p5: PULTICK received subframe %d != expected %d (first_rx %d)\n",sf,*subframe,proc->first_rx);
break;
} else if (packet_type == IF4p5_PRACH) {
LOG_D(PHY,"rx_fh:if4p5: frame %d, subframe %d, PRACH\n",f,sf);
// wakeup prach processing
if (eNB->do_prach) eNB->do_prach(eNB,f,sf);
}
if (eNB->CC_id==1) LOG_I(PHY,"rx_fh_if4p5: symbol_mask[%d] %x\n",*subframe,proc->symbol_mask[*subframe]);
} while(proc->symbol_mask[*subframe] != symbol_mask_full);
proc->subframe_rx = sf;
proc->frame_rx = f;
proc->symbol_mask[*subframe] = 0;
proc->symbol_mask[(9+*subframe)%10]= 0; // to handle a resynchronization event
if (eNB->CC_id==1) LOG_I(PHY,"Clearing symbol_mask[%d]\n",*subframe);
//caculate timestamp_rx, timestamp_tx based on frame and subframe
proc->timestamp_rx = ((proc->frame_rx * 10) + proc->subframe_rx ) * fp->samples_per_tti ;
proc->timestamp_tx = proc->timestamp_rx + (4*fp->samples_per_tti);
if (proc->first_rx == 0) {
if (proc->subframe_rx != *subframe){
LOG_E(PHY,"rx_fh_if4p5, CC_id %d: Received Timestamp doesn't correspond to the time we think it is (proc->subframe_rx %d, subframe %d,CCid %d)\n",eNB->CC_id,proc->subframe_rx,*subframe,eNB->CC_id);
}
if (proc->frame_rx != *frame) {
if (proc->frame_rx == proc->frame_offset) // This means that the RRU has adjusted its frame timing
proc->frame_offset = 0;
else
LOG_E(PHY,"rx_fh_if4p5: Received Timestamp doesn't correspond to the time we think it is (proc->frame_rx %d frame %d,CCid %d)\n",proc->frame_rx,*frame,eNB->CC_id);
}
} else {
proc->first_rx = 0;
if (eNB->CC_id==0)
proc->frame_offset = 0;
else
proc->frame_offset = PHY_vars_eNB_g[0][0]->proc.frame_rx;
*frame = proc->frame_rx;//(proc->frame_rx + proc->frame_offset)&1023;
*subframe = proc->subframe_rx;
}
if (eNB->CC_id==0) VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TRX_TS, proc->timestamp_rx&0xffffffff );
}
void rx_fh_slave(PHY_VARS_eNB_NB_IoT *eNB,int *frame,int *subframe) {
// This case is for synchronization to another thread
// it just waits for an external event. The actual rx_fh is handle by the asynchronous RX thread
eNB_proc_t *proc=&eNB->proc;
if (wait_on_condition(&proc->mutex_FH,&proc->cond_FH,&proc->instance_cnt_FH,"rx_fh_slave") < 0)
return;
release_thread(&proc->mutex_FH,&proc->instance_cnt_FH,"rx_fh_slave");
}
int wakeup_rxtx(eNB_proc_t *proc,L1_rxtx_proc_t *proc_rxtx,LTE_DL_FRAME_PARMS *fp) {
int i;
struct timespec wait;
wait.tv_sec=0;
wait.tv_nsec=5000000L;
/* accept some delay in processing - up to 5ms */
for (i = 0; i < 10 && proc_rxtx->instance_cnt_rxtx == 0; i++) {
LOG_W( PHY,"[eNB] Frame %d, eNB RXn-TXnp4 thread busy!! (cnt_rxtx %i)\n", proc_rxtx->frame_tx, proc_rxtx->instance_cnt_rxtx);
usleep(500);
}
if (proc_rxtx->instance_cnt_rxtx == 0) {
exit_fun( "TX thread busy" );
return(-1);
}
// wake up TX for subframe n+4
// lock the TX mutex and make sure the thread is ready
if (pthread_mutex_timedlock(&proc_rxtx->mutex_rxtx,&wait) != 0) {
LOG_E( PHY, "[eNB] ERROR pthread_mutex_lock for eNB RXTX thread %d (IC %d)\n", proc_rxtx->subframe_rx&1,proc_rxtx->instance_cnt_rxtx );
exit_fun( "error locking mutex_rxtx" );
return(-1);
}
++proc_rxtx->instance_cnt_rxtx;
// We have just received and processed the common part of a subframe, say n.
// TS_rx is the last received timestamp (start of 1st slot), TS_tx is the desired
// transmitted timestamp of the next TX slot (first).
// The last (TS_rx mod samples_per_frame) was n*samples_per_tti,
// we want to generate subframe (n+4), so TS_tx = TX_rx+4*samples_per_tti,
// and proc->subframe_tx = proc->subframe_rx+4
proc_rxtx->timestamp_tx = proc->timestamp_rx + (4*fp->samples_per_tti);
proc_rxtx->frame_rx = proc->frame_rx;
proc_rxtx->subframe_rx = proc->subframe_rx;
proc_rxtx->frame_tx = (proc_rxtx->subframe_rx > 5) ? (proc_rxtx->frame_rx+1)&1023 : proc_rxtx->frame_rx;
proc_rxtx->subframe_tx = (proc_rxtx->subframe_rx + 4)%10;
// the thread can now be woken up
if (pthread_cond_signal(&proc_rxtx->cond_rxtx) != 0) {
LOG_E( PHY, "[eNB] ERROR pthread_cond_signal for eNB RXn-TXnp4 thread\n");
exit_fun( "ERROR pthread_cond_signal" );
return(-1);
}
pthread_mutex_unlock( &proc_rxtx->mutex_rxtx );
return(0);
}
void wakeup_slaves(eNB_proc_t *proc) {
int i;
struct timespec wait;
wait.tv_sec=0;
wait.tv_nsec=5000000L;
for (i=0;i<proc->num_slaves;i++) {
eNB_proc_t *slave_proc = proc->slave_proc[i];
// wake up slave FH thread
// lock the FH mutex and make sure the thread is ready
if (pthread_mutex_timedlock(&slave_proc->mutex_FH,&wait) != 0) {
/* TODO: fix this log, what is 'IC'? */
/*LOG_E( PHY, "[eNB] ERROR pthread_mutex_lock for eNB CCid %d slave CCid %d (IC %d)\n",proc->CC_id,slave_proc->CC_id);*/
LOG_E( PHY, "[eNB] ERROR pthread_mutex_lock for eNB CCid %d slave CCid %d\n",proc->CC_id,slave_proc->CC_id);
exit_fun( "error locking mutex_rxtx" );
break;
}
while (slave_proc->instance_cnt_FH == 0) {
// LOG_W( PHY,"[eNB] Frame:%d , eNB rx_fh_slave thread busy!! (cnt_FH %i)\n", proc->frame_rx,slave_proc->instance_cnt_FH );
usleep(500);
}
int cnt_slave = ++slave_proc->instance_cnt_FH;
slave_proc->frame_rx = proc->frame_rx;
slave_proc->subframe_rx = proc->subframe_rx;
//slave_proc->timestamp_rx = proc->timestamp_rx;
slave_proc->timestamp_tx = proc->timestamp_tx;
pthread_mutex_unlock( &slave_proc->mutex_FH );
if (cnt_slave == 0) {
// the thread was presumably waiting where it should and can now be woken up
if (pthread_cond_signal(&slave_proc->cond_FH) != 0) {
LOG_E( PHY, "[eNB] ERROR pthread_cond_signal for eNB CCid %d, slave CCid %d\n",proc->CC_id,slave_proc->CC_id);
exit_fun( "ERROR pthread_cond_signal" );
break;
}
} else {
LOG_W( PHY,"[eNB] Frame %d, slave CC_id %d thread busy!! (cnt_FH %i)\n",slave_proc->frame_rx,slave_proc->CC_id, cnt_slave);
exit_fun( "FH thread busy" );
break;
}
}
}
uint32_t sync_corr[307200] __attribute__((aligned(32)));
// This thread run the initial synchronization like a UE
void *eNB_thread_synch(void *arg) {
PHY_VARS_eNB_NB_IoT *eNB = (PHY_VARS_eNB_NB_IoT*)arg;
LTE_DL_FRAME_PARMS *fp=&eNB->frame_parms;
int32_t sync_pos,sync_pos2;
uint32_t peak_val;
thread_top_init("eNB_thread_synch",0,5000000,10000000,10000000);
wait_sync("eNB_thread_synch");
// initialize variables for PSS detection
lte_sync_time_init(&eNB->frame_parms);
while (!oai_exit) {
// wait to be woken up
pthread_mutex_lock(&eNB->proc.mutex_synch);
while (eNB->proc.instance_cnt_synch < 0)
pthread_cond_wait(&eNB->proc.cond_synch,&eNB->proc.mutex_synch);
pthread_mutex_unlock(&eNB->proc.mutex_synch);
// if we're not in synch, then run initial synch
if (eNB->in_synch == 0) {
// run intial synch like UE
LOG_I(PHY,"Running initial synchronization\n");
sync_pos = lte_sync_time_eNB(eNB->common_vars.rxdata[0],
fp,
fp->samples_per_tti*5,
&peak_val,
sync_corr);
LOG_I(PHY,"eNB synch: %d, val %d\n",sync_pos,peak_val);
if (sync_pos >= 0) {
if (sync_pos >= fp->nb_prefix_samples)
sync_pos2 = sync_pos - fp->nb_prefix_samples;
else
sync_pos2 = sync_pos + (fp->samples_per_tti*10) - fp->nb_prefix_samples;
if (fp->frame_type == FDD) {
// PSS is hypothesized in last symbol of first slot in Frame
int sync_pos_slot = (fp->samples_per_tti>>1) - fp->ofdm_symbol_size - fp->nb_prefix_samples;
if (sync_pos2 >= sync_pos_slot)
eNB->rx_offset = sync_pos2 - sync_pos_slot;
else
eNB->rx_offset = (fp->samples_per_tti*10) + sync_pos2 - sync_pos_slot;
}
else {
}
LOG_I(PHY,"Estimated sync_pos %d, peak_val %d => timing offset %d\n",sync_pos,peak_val,eNB->rx_offset);
/*
if ((peak_val > 300000) && (sync_pos > 0)) {
// if (sync_pos++ > 3) {
write_output("eNB_sync.m","sync",(void*)&sync_corr[0],fp->samples_per_tti*5,1,2);
write_output("eNB_rx.m","rxs",(void*)eNB->common_vars.rxdata[0][0],fp->samples_per_tti*10,1,1);
exit(-1);
}
*/
eNB->in_synch=1;
}
}
// release thread
pthread_mutex_lock(&eNB->proc.mutex_synch);
eNB->proc.instance_cnt_synch--;
pthread_mutex_unlock(&eNB->proc.mutex_synch);
} // oai_exit
lte_sync_time_free();
return NULL;
}
int wakeup_synch(PHY_VARS_eNB_NB_IoT *eNB){
struct timespec wait;
wait.tv_sec=0;
wait.tv_nsec=5000000L;
// wake up synch thread
// lock the synch mutex and make sure the thread is ready
if (pthread_mutex_timedlock(&eNB->proc.mutex_synch,&wait) != 0) {
LOG_E( PHY, "[eNB] ERROR pthread_mutex_lock for eNB synch thread (IC %d)\n", eNB->proc.instance_cnt_synch );
exit_fun( "error locking mutex_synch" );
return(-1);
}
++eNB->proc.instance_cnt_synch;
// the thread can now be woken up
if (pthread_cond_signal(&eNB->proc.cond_synch) != 0) {
LOG_E( PHY, "[eNB] ERROR pthread_cond_signal for eNB synch thread\n");
exit_fun( "ERROR pthread_cond_signal" );
return(-1);
}
pthread_mutex_unlock( &eNB->proc.mutex_synch );
return(0);
}
/*!
* \brief The Fronthaul thread of RRU/RAU/RCC/eNB
* In the case of RRU/eNB, handles interface with external RF
* In the case of RAU/RCC, handles fronthaul interface with RRU/RAU
* \param param is a \ref eNB_proc_t structure which contains the info what to process.
* \returns a pointer to an int. The storage is not on the heap and must not be freed.
*/
static void* eNB_thread_FH( void* param ) {
static int eNB_thread_FH_status;
eNB_proc_t *proc = (eNB_proc_t*)param;
PHY_VARS_eNB_NB_IoT *eNB = PHY_vars_eNB_g[0][proc->CC_id];
LTE_DL_FRAME_PARMS *fp = &eNB->frame_parms;
int subframe=0, frame=0;
// set default return value
eNB_thread_FH_status = 0;
thread_top_init("eNB_thread_FH",0,870000,1000000,1000000);
wait_sync("eNB_thread_FH");
#if defined(ENABLE_ITTI) && defined(ENABLE_USE_MME)
if (eNB->node_function < NGFI_RRU_IF5)
wait_system_ready ("Waiting for eNB application to be ready %s\r", &start_eNB);
#endif
// Start IF device if any
if (eNB->start_if)
if (eNB->start_if(eNB) != 0)
LOG_E(HW,"Could not start the IF device\n");
// Start RF device if any
if (eNB->start_rf)
if (eNB->start_rf(eNB) != 0)
LOG_E(HW,"Could not start the RF device\n");
// wakeup asnych_rxtx thread because the devices are ready at this point
pthread_mutex_lock(&proc->mutex_asynch_rxtx);
proc->instance_cnt_asynch_rxtx=0;
pthread_mutex_unlock(&proc->mutex_asynch_rxtx);
pthread_cond_signal(&proc->cond_asynch_rxtx);
// This is a forever while loop, it loops over subframes which are scheduled by incoming samples from HW devices
while (!oai_exit) {
// these are local subframe/frame counters to check that we are in synch with the fronthaul timing.
// They are set on the first rx/tx in the underly FH routines.
if (subframe==9) {
subframe=0;
frame++;
frame&=1023;
} else {
subframe++;
}
// synchronization on FH interface, acquire signals/data and block
if (eNB->rx_fh) eNB->rx_fh(eNB,&frame,&subframe);
else AssertFatal(1==0, "No fronthaul interface : eNB->node_function %d",eNB->node_function);
T(T_ENB_MASTER_TICK, T_INT(0), T_INT(proc->frame_rx), T_INT(proc->subframe_rx));
// At this point, all information for subframe has been received on FH interface
// If this proc is to provide synchronization, do so
wakeup_slaves(proc);
// wake up RXn_TXnp4 thread for the subframe
// choose even or odd thread for RXn-TXnp4 processing
if (wakeup_rxtx(proc,&proc->proc_rxtx[proc->subframe_rx&1],fp) < 0)
break;
// artifical sleep for very slow fronthaul
if (eNB->frame_parms.N_RB_DL==6)
rt_sleep_ns(800000LL);
}
printf( "Exiting FH thread \n");
eNB_thread_FH_status = 0;
return &eNB_thread_FH_status;
}
/*!
* \brief The prach receive thread of eNB.
* \param param is a \ref eNB_proc_t structure which contains the info what to process.
* \returns a pointer to an int. The storage is not on the heap and must not be freed.
*/
static void* eNB_thread_prach( void* param ) {
static int eNB_thread_prach_status;
eNB_proc_t *proc = (eNB_proc_t*)param;
PHY_VARS_eNB_NB_IoT *eNB= PHY_vars_eNB_g[0][proc->CC_id];
// set default return value
eNB_thread_prach_status = 0;
thread_top_init("eNB_thread_prach",1,500000L,1000000L,20000000L);
while (!oai_exit) {
if (oai_exit) break;
if (wait_on_condition(&proc->mutex_prach,&proc->cond_prach,&proc->instance_cnt_prach,"eNB_prach_thread") < 0) break;
//prach_procedures(eNB);
////// NB_IoT testing ///////
prach_procedures_NB_IoT(eNB);
/////////////////////////////
if (release_thread(&proc->mutex_prach,&proc->instance_cnt_prach,"eNB_prach_thread") < 0) break;
}
printf( "Exiting eNB thread PRACH\n");
eNB_thread_prach_status = 0;
return &eNB_thread_prach_status;
}
static void* eNB_thread_single( void* param ) {
static int eNB_thread_single_status;
eNB_proc_t *proc = (eNB_proc_t*)param;
L1_rxtx_proc_t *proc_rxtx = &proc->proc_rxtx[0];
PHY_VARS_eNB_NB_IoT *eNB = PHY_vars_eNB_g[0][proc->CC_id];
//PHY_VARS_eNB_NB_IoT *eNB_NB_IoT = PHY_vars_eNB_NB_IoT_g[0][proc->CC_id];
LTE_DL_FRAME_PARMS *fp = &eNB->frame_parms;
// NB_IoT_DL_FRAME_PARMS *fp_NB_IoT = &eNB_NB_IoT->frame_parms_NB_IoT;
eNB->CC_id = proc->CC_id;
void *rxp[2],*rxp2[2];
int subframe=0, frame=0;
int32_t dummy_rx[fp->nb_antennas_rx][fp->samples_per_tti] __attribute__((aligned(32)));
int ic;
int rxs;
int i;
// initialize the synchronization buffer to the common_vars.rxdata
for (int i=0;i<fp->nb_antennas_rx;i++)
rxp[i] = &eNB->common_vars.rxdata[0][i][0];
// set default return value
eNB_thread_single_status = 0;
thread_top_init("eNB_thread_single",0,870000,1000000,1000000);
wait_sync("eNB_thread_single");
#if defined(ENABLE_ITTI) && defined(ENABLE_USE_MME)
if ((eNB->node_function < NGFI_RRU_IF5) && (eNB->mac_enabled==1))
wait_system_ready ("Waiting for eNB application to be ready %s\r", &start_eNB);
#endif
// Start IF device if any
if (eNB->start_if)
if (eNB->start_if(eNB) != 0)
LOG_E(HW,"Could not start the IF device\n");
// Start RF device if any
if (eNB->start_rf)
if (eNB->start_rf(eNB) != 0)
LOG_E(HW,"Could not start the RF device\n");
// wakeup asnych_rxtx thread because the devices are ready at this point
pthread_mutex_lock(&proc->mutex_asynch_rxtx);
proc->instance_cnt_asynch_rxtx=0;
pthread_mutex_unlock(&proc->mutex_asynch_rxtx);
pthread_cond_signal(&proc->cond_asynch_rxtx);
// if this is a slave eNB, try to synchronize on the DL frequency
if ((eNB->is_slave) &&
((eNB->node_function >= NGFI_RRU_IF5))) {
// if FDD, switch RX on DL frequency
double temp_freq1 = eNB->rfdevice.openair0_cfg->rx_freq[0];
double temp_freq2 = eNB->rfdevice.openair0_cfg->tx_freq[0];
for (i=0;i<4;i++) {
eNB->rfdevice.openair0_cfg->rx_freq[i] = eNB->rfdevice.openair0_cfg->tx_freq[i];
eNB->rfdevice.openair0_cfg->tx_freq[i] = temp_freq1;
}
eNB->rfdevice.trx_set_freq_func(&eNB->rfdevice,eNB->rfdevice.openair0_cfg,0);
while ((eNB->in_synch ==0)&&(!oai_exit)) {
// read in frame
rxs = eNB->rfdevice.trx_read_func(&eNB->rfdevice,
&(proc->timestamp_rx),
rxp,
fp->samples_per_tti*10,
fp->nb_antennas_rx);
if (rxs != (fp->samples_per_tti*10))
exit_fun("Problem receiving samples\n");
// wakeup synchronization processing thread
wakeup_synch(eNB);
ic=0;
while ((ic>=0)&&(!oai_exit)) {
// continuously read in frames, 1ms at a time,
// until we are done with the synchronization procedure
for (i=0; i<fp->nb_antennas_rx; i++)
rxp2[i] = (void*)&dummy_rx[i][0];
for (i=0;i<10;i++)
rxs = eNB->rfdevice.trx_read_func(&eNB->rfdevice,
&(proc->timestamp_rx),
rxp2,
fp->samples_per_tti,
fp->nb_antennas_rx);
if (rxs != fp->samples_per_tti)
exit_fun( "problem receiving samples" );
pthread_mutex_lock(&eNB->proc.mutex_synch);
ic = eNB->proc.instance_cnt_synch;
pthread_mutex_unlock(&eNB->proc.mutex_synch);
} // ic>=0
} // in_synch==0
// read in rx_offset samples
LOG_I(PHY,"Resynchronizing by %d samples\n",eNB->rx_offset);
rxs = eNB->rfdevice.trx_read_func(&eNB->rfdevice,
&(proc->timestamp_rx),
rxp,
eNB->rx_offset,
fp->nb_antennas_rx);
if (rxs != eNB->rx_offset)
exit_fun( "problem receiving samples" );
for (i=0;i<4;i++) {
eNB->rfdevice.openair0_cfg->rx_freq[i] = temp_freq1;
eNB->rfdevice.openair0_cfg->tx_freq[i] = temp_freq2;
}
eNB->rfdevice.trx_set_freq_func(&eNB->rfdevice,eNB->rfdevice.openair0_cfg,1);
} // if RRU and slave
// This is a forever while loop, it loops over subframes which are scheduled by incoming samples from HW devices
while (!oai_exit) {
// these are local subframe/frame counters to check that we are in synch with the fronthaul timing.
// They are set on the first rx/tx in the underly FH routines.
if (subframe==9) {
subframe=0;
frame++;
frame&=1023;
} else {
subframe++;
}
if (eNB->CC_id==1)
LOG_D(PHY,"eNB thread single (proc %p, CC_id %d), frame %d (%p), subframe %d (%p)\n",
proc, eNB->CC_id, frame,&frame,subframe,&subframe);
// synchronization on FH interface, acquire signals/data and block
if (eNB->rx_fh) eNB->rx_fh(eNB,&frame,&subframe);
else AssertFatal(1==0, "No fronthaul interface : eNB->node_function %d",eNB->node_function);
T(T_ENB_MASTER_TICK, T_INT(0), T_INT(proc->frame_rx), T_INT(proc->subframe_rx));
proc_rxtx->subframe_rx = proc->subframe_rx;
proc_rxtx->frame_rx = proc->frame_rx;
proc_rxtx->subframe_tx = (proc->subframe_rx+4)%10;
proc_rxtx->frame_tx = (proc->subframe_rx>5) ? (1+proc->frame_rx)&1023 : proc->frame_rx;
proc->frame_tx = proc_rxtx->frame_tx;
proc_rxtx->timestamp_tx = proc->timestamp_tx;
// adjust for timing offset between RRU
if (eNB->CC_id!=0) proc_rxtx->frame_tx = (proc_rxtx->frame_tx+proc->frame_offset)&1023;
// At this point, all information for subframe has been received on FH interface
// If this proc is to provide synchronization, do so
wakeup_slaves(proc);
//if (rxtx_NB_IoT(eNB_NB_IoT,proc_rxtx,"eNB_thread_single") < 0) break;
if (rxtx(eNB,proc_rxtx,"eNB_thread_single") < 0) break;
}
printf( "Exiting eNB_single thread \n");
eNB_thread_single_status = 0;
return &eNB_thread_single_status;
}
extern void init_fep_thread(PHY_VARS_eNB_NB_IoT *, pthread_attr_t *);
/*extern void init_td_thread(PHY_VARS_eNB *, pthread_attr_t *);
extern void init_te_thread(PHY_VARS_eNB *, pthread_attr_t *);
*/
void init_eNB_proc(int inst) {
int i=0;
int CC_id;
PHY_VARS_eNB_NB_IoT *eNB;
eNB_proc_t *proc;
L1_rxtx_proc_t *proc_rxtx;
pthread_attr_t *attr0=NULL,*attr1=NULL,*attr_FH=NULL,*attr_prach=NULL,*attr_asynch=NULL,*attr_single=NULL,*attr_fep=NULL,*attr_td=NULL,*attr_te=NULL,*attr_synch=NULL;
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
eNB = PHY_vars_eNB_g[inst][CC_id];
#ifndef OCP_FRAMEWORK
LOG_I(PHY,"Initializing eNB %d CC_id %d (%s,%s),\n",inst,CC_id,eNB_functions[eNB->node_function],eNB_timing[eNB->node_timing]);
#endif
proc = &eNB->proc;
proc_rxtx = proc->proc_rxtx;
proc_rxtx[0].instance_cnt_rxtx = -1;
proc_rxtx[1].instance_cnt_rxtx = -1;
proc->instance_cnt_prach = -1;
proc->instance_cnt_FH = -1;
proc->instance_cnt_asynch_rxtx = -1;
proc->CC_id = CC_id;
proc->instance_cnt_synch = -1;
proc->first_rx=1;
proc->first_tx=1;
proc->frame_offset = 0;
for (i=0;i<10;i++) proc->symbol_mask[i]=0;
pthread_mutex_init( &proc_rxtx[0].mutex_rxtx, NULL);
pthread_mutex_init( &proc_rxtx[1].mutex_rxtx, NULL);
pthread_cond_init( &proc_rxtx[0].cond_rxtx, NULL);
pthread_cond_init( &proc_rxtx[1].cond_rxtx, NULL);
pthread_mutex_init( &proc->mutex_prach, NULL);
pthread_mutex_init( &proc->mutex_asynch_rxtx, NULL);
pthread_mutex_init( &proc->mutex_synch,NULL);
pthread_cond_init( &proc->cond_prach, NULL);
pthread_cond_init( &proc->cond_FH, NULL);
pthread_cond_init( &proc->cond_asynch_rxtx, NULL);
pthread_cond_init( &proc->cond_synch,NULL);
pthread_attr_init( &proc->attr_FH);
pthread_attr_init( &proc->attr_prach);
pthread_attr_init( &proc->attr_synch);
pthread_attr_init( &proc->attr_asynch_rxtx);
pthread_attr_init( &proc->attr_single);
pthread_attr_init( &proc->attr_fep);
pthread_attr_init( &proc->attr_td);
pthread_attr_init( &proc->attr_te);
pthread_attr_init( &proc_rxtx[0].attr_rxtx);
pthread_attr_init( &proc_rxtx[1].attr_rxtx);
#ifndef DEADLINE_SCHEDULER
attr0 = &proc_rxtx[0].attr_rxtx;
attr1 = &proc_rxtx[1].attr_rxtx;
attr_FH = &proc->attr_FH;
attr_prach = &proc->attr_prach;
attr_synch = &proc->attr_synch;
attr_asynch = &proc->attr_asynch_rxtx;
attr_single = &proc->attr_single;
attr_fep = &proc->attr_fep;
attr_td = &proc->attr_td;
attr_te = &proc->attr_te;
#endif
if (eNB->single_thread_flag==0) {
//the two threads that manage tw consecutive subframes
pthread_create( &proc_rxtx[0].pthread_rxtx, attr0, eNB_thread_rxtx, &proc_rxtx[0] );
pthread_create( &proc_rxtx[1].pthread_rxtx, attr1, eNB_thread_rxtx, &proc_rxtx[1] );
pthread_create( &proc->pthread_FH, attr_FH, eNB_thread_FH, &eNB->proc );
}
else {
pthread_create(&proc->pthread_single, attr_single, eNB_thread_single, &eNB->proc);
init_fep_thread(eNB,attr_fep);
/*
init_td_thread(eNB,attr_td);
init_te_thread(eNB,attr_te);
*/
}
pthread_create( &proc->pthread_prach, attr_prach, eNB_thread_prach, &eNB->proc );
pthread_create( &proc->pthread_synch, attr_synch, eNB_thread_synch, eNB);
if ((eNB->node_timing == synch_to_other) ||
(eNB->node_function == NGFI_RRU_IF5) ||
(eNB->node_function == NGFI_RRU_IF4p5))
pthread_create( &proc->pthread_asynch_rxtx, attr_asynch, eNB_thread_asynch_rxtx, &eNB->proc );
char name[16];
if (eNB->single_thread_flag == 0) {
snprintf( name, sizeof(name), "RXTX0 %d", i );
pthread_setname_np( proc_rxtx[0].pthread_rxtx, name );
snprintf( name, sizeof(name), "RXTX1 %d", i );
pthread_setname_np( proc_rxtx[1].pthread_rxtx, name );
snprintf( name, sizeof(name), "FH %d", i );
pthread_setname_np( proc->pthread_FH, name );
}
else {
snprintf( name, sizeof(name), " %d", i );
pthread_setname_np( proc->pthread_single, name );
}
}
//for multiple CCs: setup master and slaves
/*
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
eNB = PHY_vars_eNB_g[inst][CC_id];
if (eNB->node_timing == synch_to_ext_device) { //master
eNB->proc.num_slaves = MAX_NUM_CCs-1;
eNB->proc.slave_proc = (eNB_proc_t**)malloc(eNB->proc.num_slaves*sizeof(eNB_proc_t*));
for (i=0; i< eNB->proc.num_slaves; i++) {
if (i < CC_id) eNB->proc.slave_proc[i] = &(PHY_vars_eNB_g[inst][i]->proc);
if (i >= CC_id) eNB->proc.slave_proc[i] = &(PHY_vars_eNB_g[inst][i+1]->proc);
}
}
}
*/
/* setup PHY proc TX sync mechanism */
pthread_mutex_init(&sync_phy_proc.mutex_phy_proc_tx, NULL);
pthread_cond_init(&sync_phy_proc.cond_phy_proc_tx, NULL);
sync_phy_proc.phy_proc_CC_id = 0;
}
/*!
* \brief Terminate eNB TX and RX threads.
*/
void kill_eNB_proc(int inst) {
int *status;
PHY_VARS_eNB_NB_IoT *eNB;
eNB_proc_t *proc;
L1_rxtx_proc_t *proc_rxtx;
for (int CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
eNB=PHY_vars_eNB_g[inst][CC_id];
proc = &eNB->proc;
proc_rxtx = &proc->proc_rxtx[0];
#ifdef DEBUG_THREADS
printf( "Killing TX CC_id %d thread %d\n", CC_id, i );
#endif
proc_rxtx[0].instance_cnt_rxtx = 0; // FIXME data race!
proc_rxtx[1].instance_cnt_rxtx = 0; // FIXME data race!
proc->instance_cnt_prach = 0;
proc->instance_cnt_FH = 0;
pthread_cond_signal( &proc_rxtx[0].cond_rxtx );
pthread_cond_signal( &proc_rxtx[1].cond_rxtx );
pthread_cond_signal( &proc->cond_prach );
pthread_cond_signal( &proc->cond_FH );
pthread_cond_broadcast(&sync_phy_proc.cond_phy_proc_tx);
pthread_join( proc->pthread_FH, (void**)&status );
pthread_mutex_destroy( &proc->mutex_FH );
pthread_cond_destroy( &proc->cond_FH );
pthread_join( proc->pthread_prach, (void**)&status );
pthread_mutex_destroy( &proc->mutex_prach );
pthread_cond_destroy( &proc->cond_prach );
int i;
for (i=0;i<2;i++) {
pthread_join( proc_rxtx[i].pthread_rxtx, (void**)&status );
pthread_mutex_destroy( &proc_rxtx[i].mutex_rxtx );
pthread_cond_destroy( &proc_rxtx[i].cond_rxtx );
}
}
}
/* this function maps the phy_vars_eNB tx and rx buffers to the available rf chains.
Each rf chain is is addressed by the card number and the chain on the card. The
rf_map specifies for each CC, on which rf chain the mapping should start. Multiple
antennas are mapped to successive RF chains on the same card. */
int setup_eNB_buffers(PHY_VARS_eNB_NB_IoT **phy_vars_eNB, openair0_config_t *openair0_cfg) {
int i,j;
int CC_id,card,ant;
//uint16_t N_TA_offset = 0;
LTE_DL_FRAME_PARMS *frame_parms;
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
if (phy_vars_eNB[CC_id]) {
frame_parms = &(phy_vars_eNB[CC_id]->frame_parms);
printf("setup_eNB_buffers: frame_parms = %p\n",frame_parms);
} else {
printf("phy_vars_eNB[%d] not initialized\n", CC_id);
return(-1);
}
/*
if (frame_parms->frame_type == TDD) {
if (frame_parms->N_RB_DL == 100)
N_TA_offset = 624;
else if (frame_parms->N_RB_DL == 50)
N_TA_offset = 624/2;
else if (frame_parms->N_RB_DL == 25)
N_TA_offset = 624/4;
}
*/
if (openair0_cfg[CC_id].mmapped_dma == 1) {
// replace RX signal buffers with mmaped HW versions
for (i=0; i<frame_parms->nb_antennas_rx; i++) {
card = i/4;
ant = i%4;
printf("Mapping eNB CC_id %d, rx_ant %d, on card %d, chain %d\n",CC_id,i,phy_vars_eNB[CC_id]->rf_map.card+card, phy_vars_eNB[CC_id]->rf_map.chain+ant);
free(phy_vars_eNB[CC_id]->common_vars.rxdata[0][i]);
phy_vars_eNB[CC_id]->common_vars.rxdata[0][i] = openair0_cfg[phy_vars_eNB[CC_id]->rf_map.card+card].rxbase[phy_vars_eNB[CC_id]->rf_map.chain+ant];
printf("rxdata[%d] @ %p\n",i,phy_vars_eNB[CC_id]->common_vars.rxdata[0][i]);
for (j=0; j<16; j++) {
printf("rxbuffer %d: %x\n",j,phy_vars_eNB[CC_id]->common_vars.rxdata[0][i][j]);
phy_vars_eNB[CC_id]->common_vars.rxdata[0][i][j] = 16-j;
}
}
for (i=0; i<frame_parms->nb_antennas_tx; i++) {
card = i/4;
ant = i%4;
printf("Mapping eNB CC_id %d, tx_ant %d, on card %d, chain %d\n",CC_id,i,phy_vars_eNB[CC_id]->rf_map.card+card, phy_vars_eNB[CC_id]->rf_map.chain+ant);
free(phy_vars_eNB[CC_id]->common_vars.txdata[0][i]);
phy_vars_eNB[CC_id]->common_vars.txdata[0][i] = openair0_cfg[phy_vars_eNB[CC_id]->rf_map.card+card].txbase[phy_vars_eNB[CC_id]->rf_map.chain+ant];
printf("txdata[%d] @ %p\n",i,phy_vars_eNB[CC_id]->common_vars.txdata[0][i]);
for (j=0; j<16; j++) {
printf("txbuffer %d: %x\n",j,phy_vars_eNB[CC_id]->common_vars.txdata[0][i][j]);
phy_vars_eNB[CC_id]->common_vars.txdata[0][i][j] = 16-j;
}
}
}
else { // not memory-mapped DMA
//nothing to do, everything already allocated in lte_init
/*
rxdata = (int32_t**)malloc16(frame_parms->nb_antennas_rx*sizeof(int32_t*));
txdata = (int32_t**)malloc16(frame_parms->nb_antennas_tx*sizeof(int32_t*));
for (i=0; i<frame_parms->nb_antennas_rx; i++) {
free(phy_vars_eNB[CC_id]->common_vars.rxdata[0][i]);
rxdata[i] = (int32_t*)(32 + malloc16(32+frame_parms->samples_per_tti*10*sizeof(int32_t))); // FIXME broken memory allocation
phy_vars_eNB[CC_id]->common_vars.rxdata[0][i] = rxdata[i]; //-N_TA_offset; // N_TA offset for TDD FIXME! N_TA_offset > 16 => access of unallocated memory
memset(rxdata[i], 0, frame_parms->samples_per_tti*10*sizeof(int32_t));
printf("rxdata[%d] @ %p (%p) (N_TA_OFFSET %d)\n", i, phy_vars_eNB[CC_id]->common_vars.rxdata[0][i],rxdata[i],N_TA_offset);
}
for (i=0; i<frame_parms->nb_antennas_tx; i++) {
free(phy_vars_eNB[CC_id]->common_vars.txdata[0][i]);
txdata[i] = (int32_t*)(32 + malloc16(32 + frame_parms->samples_per_tti*10*sizeof(int32_t))); // FIXME broken memory allocation
phy_vars_eNB[CC_id]->common_vars.txdata[0][i] = txdata[i];
memset(txdata[i],0, frame_parms->samples_per_tti*10*sizeof(int32_t));
printf("txdata[%d] @ %p\n", i, phy_vars_eNB[CC_id]->common_vars.txdata[0][i]);
}
*/
}
}
return(0);
}
void reset_opp_meas(void) {
int sfn;
reset_meas(&softmodem_stats_mt);
reset_meas(&softmodem_stats_hw);
for (sfn=0; sfn < 10; sfn++) {
reset_meas(&softmodem_stats_rxtx_sf);
reset_meas(&softmodem_stats_rx_sf);
}
}
void print_opp_meas(void) {
int sfn=0;
print_meas(&softmodem_stats_mt, "Main ENB Thread", NULL, NULL);
print_meas(&softmodem_stats_hw, "HW Acquisation", NULL, NULL);
for (sfn=0; sfn < 10; sfn++) {
print_meas(&softmodem_stats_rxtx_sf,"[eNB][total_phy_proc_rxtx]",NULL, NULL);
print_meas(&softmodem_stats_rx_sf,"[eNB][total_phy_proc_rx]",NULL,NULL);
}
}
int start_if(PHY_VARS_eNB_NB_IoT *eNB) {
return(eNB->ifdevice.trx_start_func(&eNB->ifdevice));
}
int start_rf(PHY_VARS_eNB_NB_IoT *eNB) {
return(eNB->rfdevice.trx_start_func(&eNB->rfdevice));
}
extern void eNB_fep_rru_if5(PHY_VARS_eNB_NB_IoT *eNB,L1_rxtx_proc_t *proc);
extern void eNB_fep_full(PHY_VARS_eNB_NB_IoT *eNB,L1_rxtx_proc_t *proc);
extern void eNB_fep_full_2thread(PHY_VARS_eNB_NB_IoT *eNB,L1_rxtx_proc_t *proc);
extern void do_prach(PHY_VARS_eNB_NB_IoT *eNB,int frame,int subframe);
void init_eNB(eNB_func_NB_IoT_t node_function[], eNB_timing_NB_IoT_t node_timing[],int nb_inst,eth_params_t *eth_params,int single_thread_flag,int wait_for_sync) {
int CC_id;
int inst;
PHY_VARS_eNB_NB_IoT *eNB;
int ret;
for (inst=0;inst<nb_inst;inst++) {
for (CC_id=0;CC_id<MAX_NUM_CCs;CC_id++) {
eNB = PHY_vars_eNB_g[inst][CC_id];
eNB->node_function = node_function[CC_id];
eNB->node_timing = node_timing[CC_id];
eNB->eth_params = eth_params+CC_id;
eNB->abstraction_flag = 0;
eNB->single_thread_flag = single_thread_flag;
eNB->ts_offset = 0;
eNB->in_synch = 0;
eNB->is_slave = (wait_for_sync>0) ? 1 : 0;
/////// IF-Module initialization ///////////////
LOG_I(PHY,"Registering with MAC interface module start\n");
AssertFatal((eNB->if_inst = IF_Module_init_NB_IoT(inst))!=NULL,"Cannot register interface");
eNB->if_inst->schedule_response = schedule_response_NB_IoT;
eNB->if_inst->PHY_config_req = PHY_config_req_NB_IoT;
LOG_I(PHY,"Registering with MAC interface module sucessfully\n");
#ifndef OCP_FRAMEWORK
LOG_I(PHY,"Initializing eNB %d CC_id %d : (%s,%s)\n",inst,CC_id,eNB_functions[node_function[CC_id]],eNB_timing[node_timing[CC_id]]);
#endif
switch (node_function[CC_id]) {
case NGFI_RRU_IF5:
eNB->do_prach = NULL;
eNB->do_precoding = 0;
eNB->fep = eNB_fep_rru_if5;
eNB->td = NULL;
eNB->te = NULL;
eNB->proc_uespec_rx = NULL;
eNB->proc_tx = NULL;
eNB->tx_fh = NULL;
eNB->rx_fh = rx_rf;
eNB->start_rf = start_rf;
eNB->start_if = start_if;
eNB->fh_asynch = fh_if5_asynch_DL;
if (oaisim_flag == 0) {
ret = openair0_device_load(&eNB->rfdevice, &openair0_cfg[CC_id]);
if (ret<0) {
printf("Exiting, cannot initialize rf device\n");
exit(-1);
}
}
eNB->rfdevice.host_type = RRH_HOST;
eNB->ifdevice.host_type = RRH_HOST;
ret = openair0_transport_load(&eNB->ifdevice, &openair0_cfg[CC_id], eNB->eth_params);
printf("openair0_transport_init returns %d for CC_id %d\n",ret,CC_id);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
exit(-1);
}
malloc_IF5_buffer(eNB);
break;
case NGFI_RRU_IF4p5:
eNB->do_precoding = 0;
eNB->do_prach = do_prach;
eNB->fep = eNB_fep_full;//(single_thread_flag==1) ? eNB_fep_full_2thread : eNB_fep_full;
eNB->td = NULL;
eNB->te = NULL;
eNB->proc_uespec_rx = NULL;
eNB->proc_tx = NULL;//proc_tx_rru_if4p5;
eNB->tx_fh = NULL;
eNB->rx_fh = rx_rf;
eNB->fh_asynch = fh_if4p5_asynch_DL;
eNB->start_rf = start_rf;
eNB->start_if = start_if;
if (oaisim_flag == 0) {
ret = openair0_device_load(&eNB->rfdevice, &openair0_cfg[CC_id]);
if (ret<0) {
printf("Exiting, cannot initialize rf device\n");
exit(-1);
}
}
eNB->rfdevice.host_type = RRH_HOST;
eNB->ifdevice.host_type = RRH_HOST;
printf("loading transport interface ...\n");
ret = openair0_transport_load(&eNB->ifdevice, &openair0_cfg[CC_id], eNB->eth_params);
printf("openair0_transport_init returns %d for CC_id %d\n",ret,CC_id);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
exit(-1);
}
malloc_IF4p5_buffer(eNB);
break;
case eNodeB_3GPP:
eNB->do_precoding = eNB->frame_parms.nb_antennas_tx!=eNB->frame_parms.nb_antenna_ports_eNB;
eNB->do_prach = do_prach;
eNB->fep = eNB_fep_full;//(single_thread_flag==1) ? eNB_fep_full_2thread : eNB_fep_full;
eNB->td = ulsch_decoding_data;//(single_thread_flag==1) ? ulsch_decoding_data_2thread : ulsch_decoding_data;
eNB->te = dlsch_encoding;//(single_thread_flag==1) ? dlsch_encoding_2threads : dlsch_encoding;
////////////////////// NB-IoT testing ////////////////////
//eNB->proc_uespec_rx = phy_procedures_eNB_uespec_RX;
eNB->proc_uespec_rx = phy_procedures_eNB_uespec_RX_NB_IoT;
eNB->proc_tx = proc_tx_full;
eNB->tx_fh = NULL;
eNB->rx_fh = rx_rf;
eNB->start_rf = start_rf;
eNB->start_if = NULL;
eNB->fh_asynch = NULL;
if (oaisim_flag == 0) {
ret = openair0_device_load(&eNB->rfdevice, &openair0_cfg[CC_id]);
if (ret<0) {
printf("Exiting, cannot initialize rf device\n");
exit(-1);
}
}
eNB->rfdevice.host_type = BBU_HOST;
eNB->ifdevice.host_type = BBU_HOST;
break;
case eNodeB_3GPP_BBU:
eNB->do_precoding = eNB->frame_parms.nb_antennas_tx!=eNB->frame_parms.nb_antenna_ports_eNB;
eNB->do_prach = do_prach;
eNB->fep = eNB_fep_full;//(single_thread_flag==1) ? eNB_fep_full_2thread : eNB_fep_full;
eNB->td = ulsch_decoding_data;//(single_thread_flag==1) ? ulsch_decoding_data_2thread : ulsch_decoding_data;
eNB->te = dlsch_encoding;//(single_thread_flag==1) ? dlsch_encoding_2threads : dlsch_encoding;
eNB->proc_uespec_rx = phy_procedures_eNB_uespec_RX;
eNB->proc_tx = proc_tx_full;
if (eNB->node_timing == synch_to_other) {
eNB->tx_fh = tx_fh_if5_mobipass;
eNB->rx_fh = rx_fh_slave;
eNB->fh_asynch = fh_if5_asynch_UL;
}
else {
eNB->tx_fh = tx_fh_if5;
eNB->rx_fh = rx_fh_if5;
eNB->fh_asynch = NULL;
}
eNB->start_rf = NULL;
eNB->start_if = start_if;
eNB->rfdevice.host_type = BBU_HOST;
eNB->ifdevice.host_type = BBU_HOST;
ret = openair0_transport_load(&eNB->ifdevice, &openair0_cfg[CC_id], eNB->eth_params);
printf("openair0_transport_init returns %d for CC_id %d\n",ret,CC_id);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
exit(-1);
}
malloc_IF5_buffer(eNB);
break;
case NGFI_RCC_IF4p5:
eNB->do_precoding = 0;
eNB->do_prach = do_prach;
eNB->fep = NULL;
eNB->td = ulsch_decoding_data;//(single_thread_flag==1) ? ulsch_decoding_data_2thread : ulsch_decoding_data;
eNB->te = dlsch_encoding;//(single_thread_flag==1) ? dlsch_encoding_2threads : dlsch_encoding;
eNB->proc_uespec_rx = phy_procedures_eNB_uespec_RX;
eNB->proc_tx = proc_tx_high;
eNB->tx_fh = tx_fh_if4p5;
eNB->rx_fh = rx_fh_if4p5;
eNB->start_rf = NULL;
eNB->start_if = start_if;
eNB->fh_asynch = (eNB->node_timing == synch_to_other) ? fh_if4p5_asynch_UL : NULL;
eNB->rfdevice.host_type = BBU_HOST;
eNB->ifdevice.host_type = BBU_HOST;
ret = openair0_transport_load(&eNB->ifdevice, &openair0_cfg[CC_id], eNB->eth_params);
printf("openair0_transport_init returns %d for CC_id %d\n",ret,CC_id);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
exit(-1);
}
malloc_IF4p5_buffer(eNB);
break;
case NGFI_RAU_IF4p5:
eNB->do_precoding = 0;
eNB->do_prach = do_prach;
eNB->fep = NULL;
eNB->td = ulsch_decoding_data;//(single_thread_flag==1) ? ulsch_decoding_data_2thread : ulsch_decoding_data;
eNB->te = dlsch_encoding;//(single_thread_flag==1) ? dlsch_encoding_2threads : dlsch_encoding;
eNB->proc_uespec_rx = phy_procedures_eNB_uespec_RX;
eNB->proc_tx = proc_tx_high;
eNB->tx_fh = tx_fh_if4p5;
eNB->rx_fh = rx_fh_if4p5;
eNB->fh_asynch = (eNB->node_timing == synch_to_other) ? fh_if4p5_asynch_UL : NULL;
eNB->start_rf = NULL;
eNB->start_if = start_if;
eNB->rfdevice.host_type = BBU_HOST;
eNB->ifdevice.host_type = BBU_HOST;
ret = openair0_transport_load(&eNB->ifdevice, &openair0_cfg[CC_id], eNB->eth_params);
printf("openair0_transport_init returns %d for CC_id %d\n",ret,CC_id);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
exit(-1);
}
break;
malloc_IF4p5_buffer(eNB);
}
if (setup_eNB_buffers(PHY_vars_eNB_g[inst],&openair0_cfg[CC_id])!=0) {
printf("Exiting, cannot initialize eNodeB Buffers\n");
exit(-1);
}
}
init_eNB_proc(inst);
}
sleep(1);
LOG_D(HW,"[lte-softmodem.c] eNB threads created\n");
}
void stop_eNB(int nb_inst) {
for (int inst=0;inst<nb_inst;inst++) {
printf("Killing eNB %d processing threads\n",inst);
kill_eNB_proc(inst);
}
}
targets/RT/USER/lte-enb.c
View file @ 4f032910
......@@ -74,21 +74,6 @@
#include "PHY/phy_extern.h"
//NB-IoT
#include "PHY/defs_L1_NB_IoT.h"
#include "SCHED_NBIOT/defs_NB_IoT.h"
#include "PHY_INTERFACE/IF_Module_NB_IoT.h"
#include "LAYER2/MAC/extern_NB_IoT.h"
#include "PHY/extern_NB_IoT.h"
#include "LAYER2/MAC/defs.h"
#include "PHY_INTERFACE/phy_interface_extern.h"
#ifdef SMBV
#include "PHY/TOOLS/smbv.h"
unsigned short config_frames[4] = {2,9,11,13};
#endif
//develop branch
#include "LAYER2/MAC/mac.h"
#include "LAYER2/MAC/mac_extern.h"
#include "LAYER2/MAC/mac_proto.h"
......@@ -112,25 +97,6 @@ unsigned short config_frames[4] = {2,9,11,13};
#include "T.h"
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <sched.h>
#include <linux/sched.h>
#include <signal.h>
#include <execinfo.h>
#include <getopt.h>
#include <sys/sysinfo.h>
#include "msc.h"
#include "../../SIMU/USER/init_lte.h"
#include "SCHED/sched_common.h" // for calling prach_procedures_NB_IoT()
//#define DEBUG_THREADS 1
//#define USRP_DEBUG 1
......@@ -174,106 +140,6 @@ static struct {
extern double cpuf;
/*******************************************************For NB-IoT************************************************************/
void init_eNB_NB_IoT(eNB_func_NB_IoT_t node_function[], eNB_timing_NB_IoT_t node_timing[],int nb_inst,eth_params_t *,int,int);
extern void eNB_fep_rru_if5(PHY_VARS_eNB_NB_IoT *eNB,L1_rxtx_proc_t *proc);
extern void eNB_fep_full(PHY_VARS_eNB_NB_IoT *eNB,L1_rxtx_proc_t *proc);
extern void eNB_fep_full_2thread(PHY_VARS_eNB_NB_IoT *eNB,L1_rxtx_proc_t *proc);
extern void do_prach(PHY_VARS_eNB_NB_IoT *eNB,int frame,int subframe);
//Modify for NB-IoT merge
static inline int rxtx_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,L1_rxtx_proc_t *proc, char *thread_name) {
///start_meas(&softmodem_stats_rxtx_sf);
// ****************************************
// Common RX procedures subframe n
if ((eNB->do_prach)&&((eNB->node_function != NGFI_RCC_IF4p5_NB_IoT)))
eNB->do_prach(eNB,proc->frame_rx,proc->subframe_rx);
phy_procedures_eNB_common_RX(eNB,proc);
// UE-specific RX processing for subframe n
///////////////////////////////////// for NB-IoT testing ////////////////////////
// for NB-IoT testing // activating only TX part
if (eNB->proc_uespec_rx) eNB->proc_uespec_rx(eNB, proc, no_relay );
////////////////////////////////////END///////////////////////
//npusch_procedures(eNB,proc,data_or_control);
//fill_rx_indication(eNB,i,frame,subframe);
//////////////////////////////////// for IF Module/scheduler testing
pthread_mutex_lock(&eNB->UL_INFO_mutex);
eNB->UL_INFO.frame = proc->frame_rx;
eNB->UL_INFO.subframe = proc->subframe_rx;
eNB->UL_INFO.module_id = eNB->Mod_id;
eNB->UL_INFO.CC_id = eNB->CC_id;
eNB->UL_INFO.hypersfn = proc->HFN;
eNB->if_inst_NB_IoT->UL_indication(&eNB->UL_INFO);
pthread_mutex_unlock(&eNB->UL_INFO_mutex);
//LOG_I(PHY,"After UL_indication\n");
// *****************************************
// TX processing for subframe n+4
// run PHY TX procedures the one after the other for all CCs to avoid race conditions
// (may be relaxed in the future for performance reasons)
// *****************************************
//if (wait_CCs(proc)<0) return(-1);
if (oai_exit) return(-1);
if (eNB->proc_tx) eNB->proc_tx(eNB, proc, no_relay, NULL );
if (release_thread(&proc->mutex_rxtx,&proc->instance_cnt_rxtx,thread_name)<0) return(-1);
/// stop_meas( &softmodem_stats_rxtx_sf );
return(0);
}
/*!
* \brief The prach receive thread of eNB.
* \param param is a \ref eNB_proc_t structure which contains the info what to process.
* \returns a pointer to an int. The storage is not on the heap and must not be freed.
*/
static void* eNB_thread_prach_NB_IoT( void* param ) {
static int eNB_thread_prach_status;
PHY_VARS_eNB_NB_IoT *eNB= (PHY_VARS_eNB_NB_IoT *)param;
L1_proc_t *proc = &eNB->proc;
// set default return value
eNB_thread_prach_status = 0;
thread_top_init("eNB_thread_prach",1,500000L,1000000L,20000000L);
while (!oai_exit) {
if (oai_exit) break;
if (wait_on_condition(&proc->mutex_prach,&proc->cond_prach,&proc->instance_cnt_prach,"eNB_prach_thread") < 0) break;
//prach_procedures(eNB);
////// NB_IoT testing ///////
prach_procedures_NB_IoT(eNB);
/////////////////////////////
if (release_thread(&proc->mutex_prach,&proc->instance_cnt_prach,"eNB_prach_thread") < 0) break;
}
printf( "Exiting eNB thread PRACH\n");
eNB_thread_prach_status = 0;
return &eNB_thread_prach_status;
}
/*******************************************************For NB-IoT************************************************************/
void init_eNB(int,int);
void stop_eNB(int nb_inst);
......@@ -472,7 +338,6 @@ static void *L1_thread_tx(void *param) {
//wait_sync("tx_thread");
while (!oai_exit) {
LOG_D(PHY,"Waiting for TX (IC %d)\n",proc->instance_cnt);
if (wait_on_condition(&proc->mutex,&proc->cond,&proc->instance_cnt,thread_name)<0) break;
......@@ -562,17 +427,16 @@ static void *L1_thread( void *param ) {
if (oai_exit) break;
if (eNB->CC_id==0) {
if (rxtx_NB_IoT(eNB,proc,thread_name) < 0) break; // Call rxtx_NB_IoT
if (rxtx(eNB,proc,thread_name) < 0) break;
}
LOG_D(PHY,"L1 RX %d.%d done\n",proc->frame_rx,proc->subframe_rx);
if(get_thread_parallel_conf() == PARALLEL_RU_L1_SPLIT) phy_procedures_eNB_TX(eNB, proc, 1);
if (NFAPI_MODE!=NFAPI_MODE_VNF) {
if(get_thread_parallel_conf() == PARALLEL_RU_L1_TRX_SPLIT) wakeup_tx(eNB,proc->frame_rx,proc->subframe_rx,proc->frame_tx,proc->subframe_tx,proc->timestamp_tx);
else if(get_thread_parallel_conf() == PARALLEL_RU_L1_SPLIT) wakeup_txfh(eNB,proc,proc->frame_tx,proc->subframe_tx,proc->timestamp_tx);
if(get_thread_parallel_conf() == PARALLEL_RU_L1_TRX_SPLIT) wakeup_tx(eNB,proc->frame_rx,proc->subframe_rx,proc->frame_tx,proc->subframe_tx,proc->timestamp_tx);
else if(get_thread_parallel_conf() == PARALLEL_RU_L1_SPLIT) {
phy_procedures_eNB_TX(eNB, proc, 1);
wakeup_txfh(eNB,proc,proc->frame_tx,proc->subframe_tx,proc->timestamp_tx);
}
}
if (release_thread(&proc->mutex,&proc->instance_cnt,thread_name)<0) break;
......@@ -595,14 +459,14 @@ void eNB_top(PHY_VARS_eNB *eNB, int frame_rx, int subframe_rx, char *string,RU_t
proc->subframe_rx = subframe_rx;
if (!oai_exit) {
T(T_ENB_MASTER_TICK, T_INT(0), T_INT(proc->frame_rx), T_INT(proc->subframe_rx));
T(T_ENB_MASTER_TICK, T_INT(0), T_INT(ru_proc->frame_rx), T_INT(ru_proc->subframe_rx));
L1_proc->timestamp_tx = ru_proc->timestamp_rx + (sf_ahead*fp->samples_per_tti);
L1_proc->frame_rx = ru_proc->frame_rx;
L1_proc->subframe_rx = ru_proc->subframe_rx;
L1_proc->frame_tx = (L1_proc->subframe_rx > (9-sf_ahead)) ? (L1_proc->frame_rx+1)&1023 : L1_proc->frame_rx;
L1_proc->subframe_tx = (L1_proc->subframe_rx + sf_ahead)%10;
if (rxtx_NB_IoT(eNB,L1_proc,string) < 0) LOG_E(PHY,"eNB %d CC_id %d failed during execution\n",eNB->Mod_id,eNB->CC_id); //Call rxtx_NB_IoT
if (rxtx(eNB,L1_proc,string) < 0) LOG_E(PHY,"eNB %d CC_id %d failed during execution\n",eNB->Mod_id,eNB->CC_id);
ru_proc->timestamp_tx = L1_proc->timestamp_tx;
ru_proc->subframe_tx = L1_proc->subframe_tx;
......@@ -645,9 +509,9 @@ int wakeup_txfh(PHY_VARS_eNB *eNB, L1_rxtx_proc_t *proc,int frame_tx,int subfram
if (((fp->frame_type == TDD) && (subframe_select(fp,proc->subframe_tx)==SF_UL))||
(eNB->RU_list[ru_id]->state == RU_SYNC)||
(eNB->RU_list[ru_id]->wait_cnt>0)){
AssertFatal((pthread_mutex_lock(&proc->mutex_RUs))==0, "mutex_lock returns %d\n",ret);
AssertFatal((ret=pthread_mutex_lock(&proc->mutex_RUs))==0, "mutex_lock returns %d\n",ret);
proc->instance_cnt_RUs = 0;
AssertFatal((pthread_mutex_unlock(&proc->mutex_RUs))==0, "mutex_unlock returns %d\n",ret);
AssertFatal((ret=pthread_mutex_unlock(&proc->mutex_RUs))==0, "mutex_unlock returns %d\n",ret);
continue;//hacking only works when all RU_tx works on the same subframe #TODO: adding mask stuff
}
......@@ -772,15 +636,12 @@ void wakeup_prach_eNB(PHY_VARS_eNB *eNB,RU_t *ru,int frame,int subframe) {
AssertFatal((ret=pthread_mutex_lock(&proc->mutex_RU_PRACH))==0,"mutex_lock return %d\n",ret);
for (i=0; i<eNB->num_RU; i++) {
if (ru == eNB->RU_list[i]) {
LOG_D(PHY,"frame %d, subframe %d: RU %d for eNB %d signals PRACH (mask %x, num_RU %d)\n",frame,subframe,i,eNB->Mod_id,proc->RU_mask_prach,eNB->num_RU);
if ((proc->RU_mask_prach&(1<<i)) > 0)
LOG_E(PHY,"eNB %d frame %d, subframe %d : previous information (PRACH) from RU %d (num_RU %d, mask %x) has not been served yet!\n",
eNB->Mod_id,frame,subframe,ru->idx,eNB->num_RU,proc->RU_mask_prach);
proc->RU_mask_prach |= (1<<i);
}
if (ru == eNB->RU_list[i] && eNB->RU_list[i]->wait_cnt == 0) {
LOG_D(PHY,"frame %d, subframe %d: RU %d for eNB %d signals PRACH (mask %x, num_RU %d)\n",frame,subframe,i,eNB->Mod_id,proc->RU_mask_prach,eNB->num_RU);
proc->RU_mask_prach |= (1<<i);
} else if (eNB->RU_list[i]->state == RU_SYNC || eNB->RU_list[i]->wait_cnt > 0) {
proc->RU_mask_prach |= (1<<i);
}
}
if (proc->RU_mask_prach != (1<<eNB->num_RU)-1) { // not all RUs have provided their information so return
......@@ -986,6 +847,7 @@ static void *process_stats_thread(void *param) {
return(NULL);
}
void init_eNB_proc(int inst) {
/*int i=0;*/
int CC_id;
......@@ -1065,7 +927,9 @@ void init_eNB_proc(int inst) {
LOG_I(PHY,"eNB->single_thread_flag:%d\n", eNB->single_thread_flag);
if ((get_thread_parallel_conf() == PARALLEL_RU_L1_SPLIT || get_thread_parallel_conf() == PARALLEL_RU_L1_TRX_SPLIT) && NFAPI_MODE!=NFAPI_MODE_VNF) {
if ((get_thread_parallel_conf() == PARALLEL_RU_L1_SPLIT) && NFAPI_MODE!=NFAPI_MODE_VNF) {
pthread_create( &L1_proc->pthread, attr0, L1_thread, proc );
} else if ((get_thread_parallel_conf() == PARALLEL_RU_L1_TRX_SPLIT) && NFAPI_MODE!=NFAPI_MODE_VNF) {
pthread_create( &L1_proc->pthread, attr0, L1_thread, proc );
pthread_create( &L1_proc_tx->pthread, attr1, L1_thread_tx, proc);
} else if (NFAPI_MODE==NFAPI_MODE_VNF) { // this is neccesary in VNF or L2 FAPI simulator.
......@@ -1076,10 +940,12 @@ void init_eNB_proc(int inst) {
pthread_create( &L1_proc_tx->pthread, attr1, L1_thread, L1_proc_tx);
}
pthread_create( &proc->pthread_prach, attr_prach, eNB_thread_prach_NB_IoT, eNB ); // Call eNB_thread_prach_NB_IoT
if (NFAPI_MODE!=NFAPI_MODE_VNF) {
pthread_create( &proc->pthread_prach, attr_prach, eNB_thread_prach, eNB );
#if (LTE_RRC_VERSION >= MAKE_VERSION(14, 0, 0))
pthread_create( &proc->pthread_prach_br, attr_prach_br, eNB_thread_prach_br, eNB );
pthread_create( &proc->pthread_prach_br, attr_prach_br, eNB_thread_prach_br, eNB );
#endif
}
AssertFatal(proc->instance_cnt_prach == -1,"instance_cnt_prach = %d\n",proc->instance_cnt_prach);
if (opp_enabled == 1) pthread_create(&proc->process_stats_thread,NULL,process_stats_thread,(void *)eNB);
......@@ -1193,104 +1059,6 @@ void kill_eNB_proc(int inst) {
}
/******************************************Define in original NB-IoT branch*************************************************/
/* this function maps the phy_vars_eNB tx and rx buffers to the available rf chains.
Each rf chain is is addressed by the card number and the chain on the card. The
rf_map specifies for each CC, on which rf chain the mapping should start. Multiple
antennas are mapped to successive RF chains on the same card. */
int setup_eNB_buffers(PHY_VARS_eNB_NB_IoT **phy_vars_eNB, openair0_config_t *openair0_cfg) {
int i,j;
int CC_id,card,ant;
//uint16_t N_TA_offset = 0;
LTE_DL_FRAME_PARMS *frame_parms;
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
if (phy_vars_eNB[CC_id]) {
frame_parms = &(phy_vars_eNB[CC_id]->frame_parms);
printf("setup_eNB_buffers: frame_parms = %p\n",frame_parms);
} else {
printf("phy_vars_eNB[%d] not initialized\n", CC_id);
return(-1);
}
/*
if (frame_parms->frame_type == TDD) {
if (frame_parms->N_RB_DL == 100)
N_TA_offset = 624;
else if (frame_parms->N_RB_DL == 50)
N_TA_offset = 624/2;
else if (frame_parms->N_RB_DL == 25)
N_TA_offset = 624/4;
}
*/
if (openair0_cfg[CC_id].mmapped_dma == 1) {
// replace RX signal buffers with mmaped HW versions
for (i=0; i<frame_parms->nb_antennas_rx; i++) {
card = i/4;
ant = i%4;
printf("Mapping eNB CC_id %d, rx_ant %d, on card %d, chain %d\n",CC_id,i,phy_vars_eNB[CC_id]->rf_map.card+card, phy_vars_eNB[CC_id]->rf_map.chain+ant);
free(phy_vars_eNB[CC_id]->common_vars.rxdata[0][i]);
phy_vars_eNB[CC_id]->common_vars.rxdata[0][i] = openair0_cfg[phy_vars_eNB[CC_id]->rf_map.card+card].rxbase[phy_vars_eNB[CC_id]->rf_map.chain+ant];
printf("rxdata[%d] @ %p\n",i,phy_vars_eNB[CC_id]->common_vars.rxdata[0][i]);
for (j=0; j<16; j++) {
printf("rxbuffer %d: %x\n",j,phy_vars_eNB[CC_id]->common_vars.rxdata[0][i][j]);
phy_vars_eNB[CC_id]->common_vars.rxdata[0][i][j] = 16-j;
}
}
for (i=0; i<frame_parms->nb_antennas_tx; i++) {
card = i/4;
ant = i%4;
printf("Mapping eNB CC_id %d, tx_ant %d, on card %d, chain %d\n",CC_id,i,phy_vars_eNB[CC_id]->rf_map.card+card, phy_vars_eNB[CC_id]->rf_map.chain+ant);
free(phy_vars_eNB[CC_id]->common_vars.txdata[0][i]);
phy_vars_eNB[CC_id]->common_vars.txdata[0][i] = openair0_cfg[phy_vars_eNB[CC_id]->rf_map.card+card].txbase[phy_vars_eNB[CC_id]->rf_map.chain+ant];
printf("txdata[%d] @ %p\n",i,phy_vars_eNB[CC_id]->common_vars.txdata[0][i]);
for (j=0; j<16; j++) {
printf("txbuffer %d: %x\n",j,phy_vars_eNB[CC_id]->common_vars.txdata[0][i][j]);
phy_vars_eNB[CC_id]->common_vars.txdata[0][i][j] = 16-j;
}
}
}
else { // not memory-mapped DMA
//nothing to do, everything already allocated in lte_init
/*
rxdata = (int32_t**)malloc16(frame_parms->nb_antennas_rx*sizeof(int32_t*));
txdata = (int32_t**)malloc16(frame_parms->nb_antennas_tx*sizeof(int32_t*));
for (i=0; i<frame_parms->nb_antennas_rx; i++) {
free(phy_vars_eNB[CC_id]->common_vars.rxdata[0][i]);
rxdata[i] = (int32_t*)(32 + malloc16(32+frame_parms->samples_per_tti*10*sizeof(int32_t))); // FIXME broken memory allocation
phy_vars_eNB[CC_id]->common_vars.rxdata[0][i] = rxdata[i]; //-N_TA_offset; // N_TA offset for TDD FIXME! N_TA_offset > 16 => access of unallocated memory
memset(rxdata[i], 0, frame_parms->samples_per_tti*10*sizeof(int32_t));
printf("rxdata[%d] @ %p (%p) (N_TA_OFFSET %d)\n", i, phy_vars_eNB[CC_id]->common_vars.rxdata[0][i],rxdata[i],N_TA_offset);
}
for (i=0; i<frame_parms->nb_antennas_tx; i++) {
free(phy_vars_eNB[CC_id]->common_vars.txdata[0][i]);
txdata[i] = (int32_t*)(32 + malloc16(32 + frame_parms->samples_per_tti*10*sizeof(int32_t))); // FIXME broken memory allocation
phy_vars_eNB[CC_id]->common_vars.txdata[0][i] = txdata[i];
memset(txdata[i],0, frame_parms->samples_per_tti*10*sizeof(int32_t));
printf("txdata[%d] @ %p\n", i, phy_vars_eNB[CC_id]->common_vars.txdata[0][i]);
}
*/
}
}
return(0);
}
/**************************************************************************************************************************/
void reset_opp_meas(void) {
......@@ -1338,6 +1106,7 @@ void init_transport(PHY_VARS_eNB *eNB) {
LTE_DL_FRAME_PARMS *fp = &eNB->frame_parms;
LOG_I(PHY, "Initialise transport\n");
if (NFAPI_MODE!=NFAPI_MODE_VNF) {
for (i=0; i<NUMBER_OF_UE_MAX; i++) {
LOG_D(PHY,"Allocating Transport Channel Buffers for DLSCH, UE %d\n",i);
......@@ -1380,6 +1149,7 @@ void init_transport(PHY_VARS_eNB *eNB) {
LOG_D(PHY,"eNB %d.%d : RA %p\n",eNB->Mod_id,eNB->CC_id,eNB->dlsch_ra);
eNB->dlsch_MCH = new_eNB_dlsch(1,8,NSOFT,fp->N_RB_DL, 0, fp);
LOG_D(PHY,"eNB %d.%d : MCH %p\n",eNB->Mod_id,eNB->CC_id,eNB->dlsch_MCH);
}
eNB->rx_total_gain_dB=130;
for(i=0; i<NUMBER_OF_UE_MAX; i++)
......@@ -1400,8 +1170,6 @@ void init_eNB_afterRU(void) {
for (inst=0; inst<RC.nb_inst; inst++) {
LOG_I(PHY,"RC.nb_CC[inst]:%d\n", RC.nb_CC[inst]);
for (CC_id=0; CC_id<RC.nb_CC[inst]; CC_id++) {
LOG_I(PHY,"RC.nb_CC[inst:%d][CC_id:%d]:%p\n", inst, CC_id, RC.eNB[inst][CC_id]);
eNB = RC.eNB[inst][CC_id];
......@@ -1533,395 +1301,9 @@ void init_eNB(int single_thread_flag,int wait_for_sync) {
}
void stop_eNB(int nb_inst) {
for (int inst=0; inst<nb_inst; inst++) {
LOG_I(PHY,"Killing eNB %d processing threads\n",inst);
kill_eNB_proc(inst);
}
}
/*******************************************************************For NB-IoT********************************************************************/
///Modify to NB-IoT merge
void init_eNB_NB_IoT(eNB_func_NB_IoT_t node_function[], eNB_timing_NB_IoT_t node_timing[],int nb_inst,eth_params_t *eth_params,int single_thread_flag,int wait_for_sync) {
int CC_id;
int inst;
PHY_VARS_eNB_NB_IoT *eNB;
int ret;
for (inst=0;inst<nb_inst;inst++) {
for (CC_id=0;CC_id<MAX_NUM_CCs;CC_id++) {
eNB = PHY_vars_eNB_g[inst][CC_id];
eNB->node_function = node_function[CC_id];
eNB->node_timing = node_timing[CC_id];
eNB->eth_params = eth_params+CC_id;
eNB->abstraction_flag = 0;
eNB->single_thread_flag = single_thread_flag;
eNB->ts_offset = 0;
eNB->in_synch = 0;
eNB->is_slave = (wait_for_sync>0) ? 1 : 0;
/////// IF-Module initialization ///////////////
LOG_I(PHY,"Registering with MAC interface module start\n");
AssertFatal((eNB->if_inst_NB_IoT = IF_Module_init_NB_IoT(inst))!=NULL,"Cannot register interface");
eNB->if_inst_NB_IoT->schedule_response = schedule_response_NB_IoT;
eNB->if_inst_NB_IoT->PHY_config_req = PHY_config_req_NB_IoT;
LOG_I(PHY,"Registering with MAC interface module sucessfully\n");
#ifndef OCP_FRAMEWORK
LOG_I(PHY,"Initializing eNB %d CC_id %d : (%s,%s)\n",inst,CC_id,eNB_functions[node_function[CC_id]],eNB_timing[node_timing[CC_id]]);
#endif
switch (node_function[CC_id]) {
case NGFI_RRU_IF5_NB_IoT:
eNB->do_prach = NULL;
eNB->do_precoding = 0;
eNB->fep = eNB_fep_rru_if5;
eNB->td = NULL;
eNB->te = NULL;
eNB->proc_uespec_rx = NULL;
eNB->proc_tx = NULL;
eNB->tx_fh = NULL;
eNB->rx_fh = rx_rf;
eNB->start_rf = start_rf;
eNB->start_if = start_if;
eNB->fh_asynch = fh_if5_asynch_DL;
if (oaisim_flag == 0) {
ret = openair0_device_load(&eNB->rfdevice, &openair0_cfg[CC_id]);
if (ret<0) {
printf("Exiting, cannot initialize rf device\n");
exit(-1);
}
}
eNB->rfdevice.host_type = RRH_HOST;
eNB->ifdevice.host_type = RRH_HOST;
ret = openair0_transport_load(&eNB->ifdevice, &openair0_cfg[CC_id], eNB->eth_params);
printf("openair0_transport_init returns %d for CC_id %d\n",ret,CC_id);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
exit(-1);
}
malloc_IF5_buffer(eNB);
break;
case NGFI_RRU_IF4p5_NB_IoT:
eNB->do_precoding = 0;
eNB->do_prach = do_prach;
eNB->fep = eNB_fep_full;//(single_thread_flag==1) ? eNB_fep_full_2thread : eNB_fep_full;
eNB->td = NULL;
eNB->te = NULL;
eNB->proc_uespec_rx = NULL;
eNB->proc_tx = NULL;//proc_tx_rru_if4p5;
eNB->tx_fh = NULL;
eNB->rx_fh = rx_rf;
eNB->fh_asynch = fh_if4p5_asynch_DL;
eNB->start_rf = start_rf;
eNB->start_if = start_if;
if (oaisim_flag == 0) {
ret = openair0_device_load(&eNB->rfdevice, &openair0_cfg[CC_id]);
if (ret<0) {
printf("Exiting, cannot initialize rf device\n");
exit(-1);
}
}
eNB->rfdevice.host_type = RRH_HOST;
eNB->ifdevice.host_type = RRH_HOST;
printf("loading transport interface ...\n");
ret = openair0_transport_load(&eNB->ifdevice, &openair0_cfg[CC_id], eNB->eth_params);
printf("openair0_transport_init returns %d for CC_id %d\n",ret,CC_id);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
exit(-1);
}
malloc_IF4p5_buffer(eNB);
break;
case eNodeB_3GPP_NB_IoT:
eNB->do_precoding = eNB->frame_parms.nb_antennas_tx!=eNB->frame_parms.nb_antenna_ports_eNB;
eNB->do_prach = do_prach;
eNB->fep = eNB_fep_full;//(single_thread_flag==1) ? eNB_fep_full_2thread : eNB_fep_full;
eNB->td = ulsch_decoding_data;//(single_thread_flag==1) ? ulsch_decoding_data_2thread : ulsch_decoding_data;
eNB->te = dlsch_encoding;//(single_thread_flag==1) ? dlsch_encoding_2threads : dlsch_encoding;
////////////////////// NB-IoT testing ////////////////////
//eNB->proc_uespec_rx = phy_procedures_eNB_uespec_RX;
eNB->proc_uespec_rx = phy_procedures_eNB_uespec_RX_NB_IoT;
eNB->proc_tx = proc_tx_full;
eNB->tx_fh = NULL;
eNB->rx_fh = rx_rf;
eNB->start_rf = start_rf;
eNB->start_if = NULL;
eNB->fh_asynch = NULL;
if (oaisim_flag == 0) {
ret = openair0_device_load(&eNB->rfdevice, &openair0_cfg[CC_id]);
if (ret<0) {
printf("Exiting, cannot initialize rf device\n");
exit(-1);
}
}
eNB->rfdevice.host_type = BBU_HOST;
eNB->ifdevice.host_type = BBU_HOST;
break;
case eNodeB_3GPP_BBU_NB_IoT:
eNB->do_precoding = eNB->frame_parms.nb_antennas_tx!=eNB->frame_parms.nb_antenna_ports_eNB;
eNB->do_prach = do_prach;
eNB->fep = eNB_fep_full;//(single_thread_flag==1) ? eNB_fep_full_2thread : eNB_fep_full;
eNB->td = ulsch_decoding_data;//(single_thread_flag==1) ? ulsch_decoding_data_2thread : ulsch_decoding_data;
eNB->te = dlsch_encoding;//(single_thread_flag==1) ? dlsch_encoding_2threads : dlsch_encoding;
eNB->proc_uespec_rx = phy_procedures_eNB_uespec_RX;
eNB->proc_tx = proc_tx_full;
if (eNB->node_timing == synch_to_other) {
eNB->tx_fh = tx_fh_if5_mobipass;
eNB->rx_fh = rx_fh_slave;
eNB->fh_asynch = fh_if5_asynch_UL;
}
else {
eNB->tx_fh = tx_fh_if5;
eNB->rx_fh = rx_fh_if5;
eNB->fh_asynch = NULL;
}
eNB->start_rf = NULL;
eNB->start_if = start_if;
eNB->rfdevice.host_type = BBU_HOST;
eNB->ifdevice.host_type = BBU_HOST;
ret = openair0_transport_load(&eNB->ifdevice, &openair0_cfg[CC_id], eNB->eth_params);
printf("openair0_transport_init returns %d for CC_id %d\n",ret,CC_id);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
exit(-1);
}
malloc_IF5_buffer(eNB);
break;
case NGFI_RCC_IF4p5_NB_IoT:
eNB->do_precoding = 0;
eNB->do_prach = do_prach;
eNB->fep = NULL;
eNB->td = ulsch_decoding_data;//(single_thread_flag==1) ? ulsch_decoding_data_2thread : ulsch_decoding_data;
eNB->te = dlsch_encoding;//(single_thread_flag==1) ? dlsch_encoding_2threads : dlsch_encoding;
eNB->proc_uespec_rx = phy_procedures_eNB_uespec_RX;
eNB->proc_tx = proc_tx_high;
eNB->tx_fh = tx_fh_if4p5;
eNB->rx_fh = rx_fh_if4p5;
eNB->start_rf = NULL;
eNB->start_if = start_if;
eNB->fh_asynch = (eNB->node_timing == synch_to_other) ? fh_if4p5_asynch_UL : NULL;
eNB->rfdevice.host_type = BBU_HOST;
eNB->ifdevice.host_type = BBU_HOST;
ret = openair0_transport_load(&eNB->ifdevice, &openair0_cfg[CC_id], eNB->eth_params);
printf("openair0_transport_init returns %d for CC_id %d\n",ret,CC_id);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
exit(-1);
}
malloc_IF4p5_buffer(eNB);
break;
case NGFI_RAU_IF4p5_NB_IoT:
eNB->do_precoding = 0;
eNB->do_prach = do_prach;
eNB->fep = NULL;
eNB->td = ulsch_decoding_data;//(single_thread_flag==1) ? ulsch_decoding_data_2thread : ulsch_decoding_data;
eNB->te = dlsch_encoding;//(single_thread_flag==1) ? dlsch_encoding_2threads : dlsch_encoding;
eNB->proc_uespec_rx = phy_procedures_eNB_uespec_RX;
eNB->proc_tx = proc_tx_high;
eNB->tx_fh = tx_fh_if4p5;
eNB->rx_fh = rx_fh_if4p5;
eNB->fh_asynch = (eNB->node_timing == synch_to_other) ? fh_if4p5_asynch_UL : NULL;
eNB->start_rf = NULL;
eNB->start_if = start_if;
eNB->rfdevice.host_type = BBU_HOST;
eNB->ifdevice.host_type = BBU_HOST;
ret = openair0_transport_load(&eNB->ifdevice, &openair0_cfg[CC_id], eNB->eth_params);
printf("openair0_transport_init returns %d for CC_id %d\n",ret,CC_id);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
exit(-1);
}
break;
malloc_IF4p5_buffer(eNB);
}
if (setup_eNB_buffers(PHY_vars_eNB_g[inst],&openair0_cfg[CC_id])!=0) {
printf("Exiting, cannot initialize eNodeB Buffers\n");
exit(-1);
}
}
init_eNB_proc(inst);
}
sleep(1);
LOG_D(HW,"[lte-softmodem.c] eNB threads created\n");
}
////
void rx_rf(PHY_VARS_eNB_NB_IoT *eNB,int *frame,int *subframe) {
eNB_proc_t *proc = &eNB->proc;
LTE_DL_FRAME_PARMS *fp = &eNB->frame_parms;
void *rxp[fp->nb_antennas_rx],*txp[fp->nb_antennas_tx];
unsigned int rxs,txs;
int i;
int tx_sfoffset = (eNB->single_thread_flag == 1) ? 3 : 2;
openair0_timestamp ts,old_ts;
if (proc->first_rx==0) {
// Transmit TX buffer based on timestamp from RX
// printf("trx_write -> USRP TS %llu (sf %d)\n", (proc->timestamp_rx+(3*fp->samples_per_tti)),(proc->subframe_rx+2)%10);
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TRX_TST, (proc->timestamp_rx+(tx_sfoffset*fp->samples_per_tti)-openair0_cfg[0].tx_sample_advance)&0xffffffff );
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 1 );
// prepare tx buffer pointers
lte_subframe_t SF_type = subframe_select(fp,(proc->subframe_rx+tx_sfoffset)%10);
lte_subframe_t prevSF_type = subframe_select(fp,(proc->subframe_rx+tx_sfoffset+9)%10);
lte_subframe_t nextSF_type = subframe_select(fp,(proc->subframe_rx+tx_sfoffset+1)%10);
if ((SF_type == SF_DL) ||
(SF_type == SF_S)) {
for (i=0; i<fp->nb_antennas_tx; i++)
txp[i] = (void*)&eNB->common_vars.txdata[0][i][((proc->subframe_rx+tx_sfoffset)%10)*fp->samples_per_tti];
int siglen=fp->samples_per_tti,flags=1;
if (SF_type == SF_S) {
siglen = fp->dl_symbols_in_S_subframe*(fp->ofdm_symbol_size+fp->nb_prefix_samples0);
flags=3; // end of burst
}
if ((fp->frame_type == TDD) &&
(SF_type == SF_DL)&&
(prevSF_type == SF_UL) &&
(nextSF_type == SF_DL))
flags = 2; // start of burst
if ((fp->frame_type == TDD) &&
(SF_type == SF_DL)&&
(prevSF_type == SF_UL) &&
(nextSF_type == SF_UL))
flags = 4; // start of burst and end of burst (only one DL SF between two UL)
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 1 );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TRX_WRITE_FLAGS,flags);
txs = eNB->rfdevice.trx_write_func(&eNB->rfdevice,
proc->timestamp_rx+eNB->ts_offset+(tx_sfoffset*fp->samples_per_tti)-openair0_cfg[0].tx_sample_advance,
txp,
siglen,
fp->nb_antennas_tx,
flags);
clock_gettime( CLOCK_MONOTONIC, &end_rf);
end_rf_ts = proc->timestamp_rx+eNB->ts_offset+(tx_sfoffset*fp->samples_per_tti)-openair0_cfg[0].tx_sample_advance;
if (recv_if_count != 0 ) {
recv_if_count = recv_if_count-1;
LOG_D(HW,"[From Timestamp %"PRId64" to Timestamp %"PRId64"] RTT_RF: %"PRId64"; RTT_RF\n", start_rf_prev_ts, end_rf_ts, clock_difftime_ns(start_rf_prev, end_rf));
LOG_D(HW,"[From Timestamp %"PRId64" to Timestamp %"PRId64"] RTT_RF: %"PRId64"; RTT_RF\n",start_rf_prev2_ts, end_rf_ts, clock_difftime_ns(start_rf_prev2, end_rf));
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 0 );
if (txs != siglen) {
LOG_E(PHY,"TX : Timeout (sent %d/%d)\n",txs, fp->samples_per_tti);
exit_fun( "problem transmitting samples" );
}
}
}
for (i=0; i<fp->nb_antennas_rx; i++)
rxp[i] = (void*)&eNB->common_vars.rxdata[0][i][*subframe*fp->samples_per_tti];
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ, 1 );
old_ts = proc->timestamp_rx;
rxs = eNB->rfdevice.trx_read_func(&eNB->rfdevice,
&ts,
rxp,
fp->samples_per_tti,
fp->nb_antennas_rx);
start_rf_prev2= start_rf_prev;
start_rf_prev2_ts= start_rf_prev_ts;
start_rf_prev = start_rf_new;
start_rf_prev_ts = start_rf_new_ts;
clock_gettime( CLOCK_MONOTONIC, &start_rf_new);
start_rf_new_ts = ts;
LOG_D(PHY,"rx_rf: first_rx %d received ts %"PRId64" (sptti %d)\n",proc->first_rx,ts,fp->samples_per_tti);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ, 0 );
proc->timestamp_rx = ts-eNB->ts_offset;
if (rxs != fp->samples_per_tti)
LOG_E(PHY,"rx_rf: Asked for %d samples, got %d from USRP\n",fp->samples_per_tti,rxs);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ, 0 );
if (proc->first_rx == 1) {
eNB->ts_offset = proc->timestamp_rx;
proc->timestamp_rx=0;
}
else {
if (proc->timestamp_rx - old_ts != fp->samples_per_tti) {
LOG_I(PHY,"rx_rf: rfdevice timing drift of %"PRId64" samples (ts_off %"PRId64")\n",proc->timestamp_rx - old_ts - fp->samples_per_tti,eNB->ts_offset);
eNB->ts_offset += (proc->timestamp_rx - old_ts - fp->samples_per_tti);
proc->timestamp_rx = ts-eNB->ts_offset;
}
}
proc->frame_rx = (proc->timestamp_rx / (fp->samples_per_tti*10))&1023;
proc->subframe_rx = (proc->timestamp_rx / fp->samples_per_tti)%10;
proc->frame_rx = (proc->frame_rx+proc->frame_offset)&1023;
proc->frame_tx = proc->frame_rx;
if (proc->subframe_rx > 5) proc->frame_tx=(proc->frame_tx+1)&1023;
// synchronize first reception to frame 0 subframe 0
proc->timestamp_tx = proc->timestamp_rx+(4*fp->samples_per_tti);
// printf("trx_read <- USRP TS %lu (offset %d sf %d, f %d, first_rx %d)\n", proc->timestamp_rx,eNB->ts_offset,proc->subframe_rx,proc->frame_rx,proc->first_rx);
if (proc->first_rx == 0) {
if (proc->subframe_rx != *subframe){
LOG_E(PHY,"rx_rf: Received Timestamp (%"PRId64") doesn't correspond to the time we think it is (proc->subframe_rx %d, subframe %d)\n",proc->timestamp_rx,proc->subframe_rx,*subframe);
exit_fun("Exiting");
}
int f2 = (*frame+proc->frame_offset)&1023;
if (proc->frame_rx != f2) {
LOG_E(PHY,"rx_rf: Received Timestamp (%"PRId64") doesn't correspond to the time we think it is (proc->frame_rx %d frame %d, frame_offset %d, f2 %d)\n",proc->timestamp_rx,proc->frame_rx,*frame,proc->frame_offset,f2);
exit_fun("Exiting");
}
} else {
proc->first_rx--;
*frame = proc->frame_rx;
*subframe = proc->subframe_rx;
}
//printf("timestamp_rx %lu, frame %d(%d), subframe %d(%d)\n",proc->timestamp_rx,proc->frame_rx,frame,proc->subframe_rx,subframe);
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TRX_TS, proc->timestamp_rx&0xffffffff );
if (rxs != fp->samples_per_tti)
exit_fun( "problem receiving samples" );
}
int start_rf(PHY_VARS_eNB_NB_IoT *eNB) {
return(eNB->rfdevice.trx_start_func(&eNB->rfdevice));
}
int start_if(PHY_VARS_eNB_NB_IoT *eNB) {
return(eNB->ifdevice.trx_start_func(&eNB->ifdevice));
}
/*******************************************************************For NB-IoT********************************************************************/
\ No newline at end of file
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment