Skip to content

O
OpenXG-RAN
Commit 59eaee00 authored by Raymond Knopp's avatar Raymond Knopp
Browse files
Options 

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@6635 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 91efb9e6
Show whitespace changes
Inline Side-by-side
Showing with 81 additions and 41 deletions
common/utils/itti_analyzer/README
View file @ 59eaee00
To run itti_analyzer, please perform the following actions:
1) apt-get install autotools-dev automake libtool
2) libtoolize
3) ./autogen.sh
4) ./configure
5) make
6) ./itt
\ No newline at end of file
openair-cn/UDP/udp_eNB_task.c
View file @ 59eaee00
......@@ -383,6 +383,7 @@ void *udp_eNB_task(void *args_p)
} break;
case TERMINATE_MESSAGE: {
LOG_W(UDP_, "Received TERMINATE_MESSAGE\n");
itti_exit_task();
} break;
......
openair2/LAYER2/MAC/eNB_scheduler.c
View file @ 59eaee00
......@@ -224,7 +224,7 @@ void eNB_dlsch_ulsch_scheduler(module_id_t module_idP,uint8_t cooperation_flag,
// Schedule ULSCH for FDD or subframeP 4 (TDD config 0,3,6)
// Schedule Normal DLSCH
schedule_RA(module_idP,frameP,subframeP,2,nprb,nCCE);
//
if (mac_xface->lte_frame_parms->frame_type == FDD) { //FDD
schedule_ulsch(module_idP,frameP,cooperation_flag,0,4,nCCE);//,calibration_flag);
......@@ -237,7 +237,9 @@ void eNB_dlsch_ulsch_scheduler(module_id_t module_idP,uint8_t cooperation_flag,
// schedule_ue_spec(module_idP,frameP,subframeP,nprb,nCCE,mbsfn_status);
fill_DLSCH_dci(module_idP,frameP,subframeP,RBalloc,1,mbsfn_status);
//schedule_RA(module_idP,frameP,subframeP,2,nprb,nCCE);
//fill_DLSCH_dci(module_idP,frameP,subframeP,RBalloc,1,mbsfn_status);
break;
case 1:
......@@ -262,7 +264,6 @@ void eNB_dlsch_ulsch_scheduler(module_id_t module_idP,uint8_t cooperation_flag,
schedule_ue_spec(module_idP,frameP,subframeP,nprb,nCCE,mbsfn_status);
fill_DLSCH_dci(module_idP,frameP,subframeP,RBalloc,0,mbsfn_status);
schedule_ulsch(module_idP,frameP,cooperation_flag,1,5,nCCE);
}
break;
......@@ -273,7 +274,6 @@ void eNB_dlsch_ulsch_scheduler(module_id_t module_idP,uint8_t cooperation_flag,
schedule_ue_spec(module_idP,frameP,subframeP,nprb,nCCE,mbsfn_status);
fill_DLSCH_dci(module_idP,frameP,subframeP,RBalloc,0,mbsfn_status);
schedule_ulsch(module_idP,frameP,cooperation_flag,2,6,nCCE);
}
break;
......
openair2/LAYER2/MAC/eNB_scheduler_dlsch.c
View file @ 59eaee00
......@@ -64,7 +64,7 @@
#endif
#define ENABLE_MAC_PAYLOAD_DEBUG
#define DEBUG_eNB_SCHEDULER 1
//#define DEBUG_eNB_SCHEDULER 1
extern inline unsigned int taus(void);
......@@ -970,18 +970,18 @@ void schedule_ue_spec(module_id_t module_idP,
padding,
post_padding);
//#ifdef DEBUG_eNB_SCHEDULER
if (ta_update) {
LOG_I(MAC,"[eNB %d][DLSCH] Frame %d Generate header for UE_id %d on CC_id %d: sdu_length_total %d, num_sdus %d, sdu_lengths[0] %d, sdu_lcids[0] %d => payload offset %d,timing advance value : %d, padding %d,post_padding %d,(mcs %d, TBS %d, nb_rb %d),header_dcch %d, header_dtch %d\n",
// if (ta_update) {
LOG_D(MAC,"[eNB %d][DLSCH] Frame %d Generate header for UE_id %d on CC_id %d: sdu_length_total %d, num_sdus %d, sdu_lengths[0] %d, sdu_lcids[0] %d => payload offset %d,timing advance value : %d, padding %d,post_padding %d,(mcs %d, TBS %d, nb_rb %d),header_dcch %d, header_dtch %d\n",
module_idP,frameP, UE_id, CC_id, sdu_length_total,num_sdus,sdu_lengths[0],sdu_lcids[0],offset,
ta_update,padding,post_padding,mcs,TBS,nb_rb,header_len_dcch,header_len_dtch);
}
//#endif
//#endif
#ifdef DEBUG_eNB_SCHEDULER
LOG_T(MAC,"[eNB %d] First 16 bytes of DLSCH : \n");
for (i=0;i<16;i++)
LOG_T(MAC,"%x.",dlsch_buffer[i]);
LOG_T(MAC,"\n");
#endif
// cycle through SDUs and place in dlsch_buffer
memcpy(&UE_list->DLSCH_pdu[CC_id][0][UE_id].payload[0][offset],dlsch_buffer,sdu_length_total);
// memcpy(&eNB_mac_inst[0].DLSCH_pdu[0][0].payload[0][offset],dcch_buffer,sdu_lengths[0]);
......
openair2/LAYER2/PDCP_v10.1.0/pdcp_fifo.c
View file @ 59eaee00
......@@ -149,7 +149,7 @@ int pdcp_fifo_flush_sdus(const protocol_ctxt_t* const ctxt_pP)
}
#endif /* defined(ENABLE_USE_MME) */
#ifdef PDCP_DEBUG
LOG_I(PDCP, "PDCP->IP TTI %d INST %d: Preparing %d Bytes of data from rab %d to Nas_mesh\n",
LOG_D(PDCP, "PDCP->IP TTI %d INST %d: Preparing %d Bytes of data from rab %d to higher layers\n",
ctxt_pP->frame, ((pdcp_data_ind_header_t *)(sdu_p->data))->inst,
((pdcp_data_ind_header_t *)(sdu_p->data))->data_size, ((pdcp_data_ind_header_t *)(sdu_p->data))->rb_id);
#endif //PDCP_DEBUG
......@@ -178,7 +178,7 @@ int pdcp_fifo_flush_sdus(const protocol_ctxt_t* const ctxt_pP)
#endif //NAS_FIFO
#ifdef PDCP_DEBUG
LOG_I(PDCP, "Frame %d Sent %d Bytes of header to Nas_mesh\n",
LOG_D(PDCP, "Frame %d Sent %d Bytes of header to higher layers\n",
ctxt_pP->frame,
bytes_wrote);
#endif //PDCP_DEBUG
......@@ -209,7 +209,7 @@ int pdcp_fifo_flush_sdus(const protocol_ctxt_t* const ctxt_pP)
#endif // NAS_FIFO
#ifdef PDCP_DEBUG
LOG_I(PDCP, "PDCP->IP Frame %d INST %d: Sent %d Bytes of data from rab %d to Nas_mesh\n",
LOG_D(PDCP, "PDCP->IP Frame %d INST %d: Sent %d Bytes of data from rab %d to higher layers\n",
ctxt_pP->frame,
((pdcp_data_ind_header_t *)(sdu_p->data))->inst,
bytes_wrote,
......@@ -319,7 +319,7 @@ int pdcp_fifo_read_input_sdus_remaining_bytes (const protocol_ctxt_t* const ctx
return 0;
} else {
#ifdef PDCP_DEBUG
LOG_I(PDCP, "Frame %d: IP->RADIO RECEIVED COMPLETE SDU size %d inst %d rb %d\n",
LOG_D(PDCP, "Frame %d: IP->RADIO RECEIVED COMPLETE SDU size %d inst %d rb %d\n",
ctxt_pP->frame,
pdcp_input_sdu_size_read,
pdcp_input_header.inst,
......@@ -615,18 +615,18 @@ int pdcp_fifo_read_input_sdus (const protocol_ctxt_t* const ctxt_pP)
nas_nlh_rx = NLMSG_NEXT (nas_nlh_rx, len)) {
if (nas_nlh_rx->nlmsg_type == NLMSG_DONE) {
LOG_I(PDCP, "[PDCP][FIFO] RX NLMSG_DONE\n");
LOG_D(PDCP, "[PDCP][FIFO] RX NLMSG_DONE\n");
//return;
}
if (nas_nlh_rx->nlmsg_type == NLMSG_ERROR) {
LOG_I(PDCP, "[PDCP][FIFO] RX NLMSG_ERROR\n");
LOG_E(PDCP, "[PDCP][FIFO] RX NLMSG_ERROR\n");
}
if (pdcp_read_state_g == 0) {
if (nas_nlh_rx->nlmsg_len == sizeof (pdcp_data_req_header_t) + sizeof(struct nlmsghdr)) {
pdcp_read_state_g = 1; //get
memcpy((void *)&pdcp_read_header_g, (void *)NLMSG_DATA(nas_nlh_rx), sizeof(pdcp_data_req_header_t));
LOG_I(PDCP, "[PDCP][FIFO] RX pdcp_data_req_header_t inst %u, rb_id %u data_size %d\n",
LOG_D(PDCP, "[PDCP][FIFO] RX pdcp_data_req_header_t inst %u, rb_id %u data_size %d\n",
pdcp_read_header_g.inst, pdcp_read_header_g.rb_id, pdcp_read_header_g.data_size);
} else {
LOG_E(PDCP, "[PDCP][FIFO] WRONG size %d should be sizeof (pdcp_data_req_header_t) + sizeof(struct nlmsghdr)\n",
......@@ -636,7 +636,7 @@ int pdcp_fifo_read_input_sdus (const protocol_ctxt_t* const ctxt_pP)
pdcp_read_state_g = 0;
// print_active_requests()
#ifdef PDCP_DEBUG
LOG_I(PDCP, "[PDCP][FIFO] Something in socket, length %d \n",
LOG_D(PDCP, "[PDCP][FIFO] Something in socket, length %d \n",
nas_nlh_rx->nlmsg_len - sizeof(struct nlmsghdr));
#endif
//memcpy(pdcp_read_payload, (unsigned char *)NLMSG_DATA(nas_nlh_rx), nas_nlh_rx->nlmsg_len - sizeof(struct nlmsghdr));
......@@ -698,7 +698,7 @@ int pdcp_fifo_read_input_sdus (const protocol_ctxt_t* const ctxt_pP)
rab_id = rab_id % maxDRB;
if (pdcp_array_drb_eNB[ctxt.enb_module_id][ctxt.ue_module_id][rab_id-1].instanciated_instance) {
#ifdef PDCP_DEBUG
LOG_I(PDCP, "[FRAME %5u][eNB][NETLINK][IP->PDCP] INST %d: Received socket with length %d (nlmsg_len = %d) on Rab %d \n",
LOG_D(PDCP, "[FRAME %5u][eNB][NETLINK][IP->PDCP] INST %d: Received socket with length %d (nlmsg_len = %d) on Rab %d \n",
ctxt.frame,
pdcp_read_header_g.inst,
len,
......@@ -762,7 +762,7 @@ int pdcp_fifo_read_input_sdus (const protocol_ctxt_t* const ctxt_pP)
if (rab_id != 0) {
if (pdcp_array_drb_ue[ctxt.ue_module_id][rab_id-1].instanciated_instance) {
#ifdef PDCP_DEBUG
LOG_I(PDCP, "[FRAME %5u][UE][NETLINK][IP->PDCP] INST %d: Received socket with length %d (nlmsg_len = %d) on Rab %d \n",
LOG_D(PDCP, "[FRAME %5u][UE][NETLINK][IP->PDCP] INST %d: Received socket with length %d (nlmsg_len = %d) on Rab %d \n",
ctxt.frame,
pdcp_read_header_g.inst,
len,
......@@ -853,7 +853,7 @@ void pdcp_fifo_read_input_sdus_from_otg (const protocol_ctxt_t* const ctxt_pP)
//rb_id = (ctxt_pP->enb_flag == 1) ? ctxt_pP->enb_module_id * MAX_NUM_RB + DTCH : (NB_eNB_INST + UE_index -1 ) * MAX_NUM_RB + DTCH ;
src_id = module_id;
while ((otg_pkt_info = pkt_list_remove_head(&(otg_pdcp_buffer[module_id]))) != NULL) {
LOG_I(OTG,"Mod_id %d Frame %d Got a packet (%p), HEAD of otg_pdcp_buffer[%d] is %p and Nb elements is %d\n",
LOG_D(OTG,"Mod_id %d Frame %d Got a packet (%p), HEAD of otg_pdcp_buffer[%d] is %p and Nb elements is %d\n",
module_id,ctxt_pP->frame, otg_pkt_info, module_id, pkt_list_get_head(&(otg_pdcp_buffer[module_id])), otg_pdcp_buffer[module_id].nb_elements);
//otg_pkt_info = pkt_list_remove_head(&(otg_pdcp_buffer[module_id]));
dst_id = (otg_pkt_info->otg_pkt).dst_id;
......@@ -947,7 +947,7 @@ void pdcp_fifo_read_input_sdus_from_otg (const protocol_ctxt_t* const ctxt_pP)
pkt_size,
otg_pkt,
PDCP_TRANSMISSION_MODE_DATA);
LOG_I(OTG,"send packet from module %d on rab id %d (src %d, dst %d) pkt size %d\n", ctxt_pP->enb_module_id, rb_id, src_id, dst_id, pkt_size);
LOG_D(OTG,"send packet from module %d on rab id %d (src %d, dst %d) pkt size %d\n", ctxt_pP->enb_module_id, rb_id, src_id, dst_id, pkt_size);
free(otg_pkt);
}
/*else {
......
openair2/RRC/LITE/rrc_eNB.c
View file @ 59eaee00
......@@ -788,7 +788,7 @@ static void rrc_eNB_generate_defaultRRCConnectionReconfiguration(
SRB2_rlc_config->choice.explicitValue.choice.am.ul_AM_RLC.pollPDU = PollPDU_p8;
SRB2_rlc_config->choice.explicitValue.choice.am.ul_AM_RLC.pollByte = PollByte_kB1000;
SRB2_rlc_config->choice.explicitValue.choice.am.ul_AM_RLC.maxRetxThreshold = UL_AM_RLC__maxRetxThreshold_t32;
SRB2_rlc_config->choice.explicitValue.choice.am.dl_AM_RLC.t_Reordering = T_Reordering_ms50;
SRB2_rlc_config->choice.explicitValue.choice.am.dl_AM_RLC.t_Reordering = T_Reordering_ms35;
SRB2_rlc_config->choice.explicitValue.choice.am.dl_AM_RLC.t_StatusProhibit = T_StatusProhibit_ms10;
SRB2_lchan_config = CALLOC(1, sizeof(*SRB2_lchan_config));
......@@ -844,9 +844,9 @@ static void rrc_eNB_generate_defaultRRCConnectionReconfiguration(
DRB_rlc_config->choice.um_Bi_Directional.ul_UM_RLC.sn_FieldLength = SN_FieldLength_size10;
DRB_rlc_config->choice.um_Bi_Directional.dl_UM_RLC.sn_FieldLength = SN_FieldLength_size10;
#ifdef CBA
DRB_rlc_config->choice.um_Bi_Directional.dl_UM_RLC.t_Reordering = T_Reordering_ms5;//T_Reordering_ms25;
DRB_rlc_config->choice.um_Bi_Directional.dl_UM_RLC.t_Reordering = T_Reordering_ms35;//T_Reordering_ms25;
#else
DRB_rlc_config->choice.um_Bi_Directional.dl_UM_RLC.t_Reordering = T_Reordering_ms25;
DRB_rlc_config->choice.um_Bi_Directional.dl_UM_RLC.t_Reordering = T_Reordering_ms35;
#endif
#endif
......@@ -1614,7 +1614,7 @@ void rrc_eNB_generate_RRCConnectionReconfiguration_handover(
SRB1_rlc_config->choice.explicitValue.choice.am.ul_AM_RLC.pollPDU = PollPDU_p8;
SRB1_rlc_config->choice.explicitValue.choice.am.ul_AM_RLC.pollByte = PollByte_kB1000;
SRB1_rlc_config->choice.explicitValue.choice.am.ul_AM_RLC.maxRetxThreshold = UL_AM_RLC__maxRetxThreshold_t16;
SRB1_rlc_config->choice.explicitValue.choice.am.dl_AM_RLC.t_Reordering = T_Reordering_ms50;
SRB1_rlc_config->choice.explicitValue.choice.am.dl_AM_RLC.t_Reordering = T_Reordering_ms35;
SRB1_rlc_config->choice.explicitValue.choice.am.dl_AM_RLC.t_StatusProhibit = T_StatusProhibit_ms10;
SRB1_lchan_config = CALLOC(1, sizeof(*SRB1_lchan_config));
......@@ -1838,7 +1838,7 @@ void rrc_eNB_generate_RRCConnectionReconfiguration_handover(
SRB2_rlc_config->choice.explicitValue.choice.am.ul_AM_RLC.pollPDU = PollPDU_p8;
SRB2_rlc_config->choice.explicitValue.choice.am.ul_AM_RLC.pollByte = PollByte_kB1000;
SRB2_rlc_config->choice.explicitValue.choice.am.ul_AM_RLC.maxRetxThreshold = UL_AM_RLC__maxRetxThreshold_t32;
SRB2_rlc_config->choice.explicitValue.choice.am.dl_AM_RLC.t_Reordering = T_Reordering_ms50;
SRB2_rlc_config->choice.explicitValue.choice.am.dl_AM_RLC.t_Reordering = T_Reordering_ms35;
SRB2_rlc_config->choice.explicitValue.choice.am.dl_AM_RLC.t_StatusProhibit = T_StatusProhibit_ms10;
SRB2_lchan_config = CALLOC(1, sizeof(*SRB2_lchan_config));
......@@ -1878,7 +1878,7 @@ void rrc_eNB_generate_RRCConnectionReconfiguration_handover(
DRB_rlc_config->present = RLC_Config_PR_um_Bi_Directional;
DRB_rlc_config->choice.um_Bi_Directional.ul_UM_RLC.sn_FieldLength = SN_FieldLength_size10;
DRB_rlc_config->choice.um_Bi_Directional.dl_UM_RLC.sn_FieldLength = SN_FieldLength_size10;
DRB_rlc_config->choice.um_Bi_Directional.dl_UM_RLC.t_Reordering = T_Reordering_ms5;
DRB_rlc_config->choice.um_Bi_Directional.dl_UM_RLC.t_Reordering = T_Reordering_ms35;
DRB_pdcp_config = CALLOC(1, sizeof(*DRB_pdcp_config));
DRB_config->pdcp_Config = DRB_pdcp_config;
......
targets/Makerules
View file @ 59eaee00
......@@ -18,28 +18,38 @@ NUM_CORES:=$(shell cat /proc/cpuinfo | grep processor | wc -l)
NETTLE_FOUND := $(shell if pkg-config --exists nettle; then echo "1" ; else echo "0"; fi)
ifeq ($(NETTLE_FOUND), 1)
NETTLE_LIBS := $(shell pkg-config --libs nettle)
#else
#@echo "package nettle not installed"
endif
OPENSSL_FOUND := $(shell if pkg-config --exists openssl; then echo "1" ; else echo "0"; fi)
ifeq ($(OPENSSL_FOUND), 1)
OPENSSL_LIBS := $(shell pkg-config --libs openssl)
#else
#@echo "package openssl not installed"
endif
PGM_FOUND := $(shell if pkg-config --exists openpgm-5.1; then echo "1" ; else echo "0"; fi)
ifeq ($(PGM_FOUND), 1)
PGM_CFLAGS := $(shell pkg-config --cflags openpgm-5.1)
PGM_LIBS := $(shell pkg-config --libs openpgm-5.1)
#else
#@echo "package pgm not installed"
endif
LIBXML2_FOUND := $(shell if pkg-config --exists libxml-2.0; then echo "1" ; else echo "0"; fi)
ifeq ($(LIBXML2_FOUND), 1)
LIBXML2_CFLAGS := $(shell pkg-config --cflags libxml-2.0)
LIBXML2_LIBS := $(shell pkg-config --libs libxml-2.0)
#else
#@echo "package libxml2 not installed"
endif
XPM_FOUND := $(shell if pkg-config --exists xpm; then echo "1" ; else echo "0"; fi)
ifeq ($(XPM_FOUND), 1)
XPM_LIBS := $(shell pkg-config --libs xpm)
#else
#@echo "package xmp not installed"
endif
LIBBLAS_FOUND := $(shell if [ -f /usr/include/cblas.h ]; then echo "1"; else echo "0"; fi)
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf
View file @ 59eaee00
......@@ -114,26 +114,26 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.171/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.171/24";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
log_config :
{
global_log_level ="info";
global_log_level ="debug";
global_log_verbosity ="medium";
hw_log_level ="debug";
hw_log_level ="warn";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_level ="warn";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
mac_log_level ="warn";
mac_log_verbosity ="medium";
rlc_log_level ="warn";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_level ="warn";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
......
targets/RT/USER/init_exmimo2.sh
View file @ 59eaee00
#!/bin/bash
sudo rmmod nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
if [ "$1" = "eNB" ]; then
echo "bring up oai0 interface for enb"
sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.9 -r 1
else
if [ "$1" = "UE" ]; then
echo "bring up oai0 interface for UE"
sudo ifconfig oai0 10.0.1.9 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.9 -t 10.0.1.1 -r 1
fi
fi
PCI=`lspci -m | grep Xilinx`
if [ -z "$PCI" ]; then
echo "No card found. Stopping!"
......
targets/RT/USER/lte-softmodem.c
View file @ 59eaee00
......@@ -2622,7 +2622,7 @@ int main(int argc, char **argv) {
for(CC_id=0;CC_id<MAX_NUM_CCs;CC_id++) {
rf_map[CC_id].card=0;
rf_map[CC_id].chain=CC_id;
rf_map[CC_id].chain=CC_id+1;
}
// connect the TX/RX buffers
......
targets/TEST/OAI/case11.py
View file @ 59eaee00
......@@ -57,7 +57,7 @@ def execute(oai, user, pw, host,logfile,logdir,debug):
trace = logdir + '/log_' + case + test + '.txt;'
tee = ' 2>&1 | tee ' + trace
diag = 'check the compilation errors for dlsim in $OPENAIR1_DIR/SIMULATION/LTE_PHY'
oai.send('make cleanall;')
oai.send('make clean; make cleanall;')
oai.send('rm -f ./dlsim.rel8.'+host)
oai.send_expect_false('make dlsim -j4' + tee, makerr1, 1500)
oai.send('cp ./dlsim ./dlsim.rel8.'+host)
......
targets/build_oai.bash
View file @ 59eaee00
......@@ -738,7 +738,7 @@ if [ $RUN -ne 0 ]; then
fi
echo "############# running ltesoftmodem #############"
if [ $RUN_GDB -eq 0 ]; then
$SUDO exec $OPENAIR_TARGETS/bin/lte-softmodem `echo $EXE_ARGUMENTS`
$SUDO $OPENAIR_TARGETS/bin/lte-softmodem `echo $EXE_ARGUMENTS`
else
$SUDO setenv MALLOC_CHECK_ 2
$SUDO touch ~/.gdb_lte_softmodem
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment