Skip to content

O
OpenXG-RAN
Commit 614a62ee authored by Raymond Knopp's avatar Raymond Knopp
Browse files
Options 

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@5969 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 4c45400d
Expand all Show whitespace changes
Inline Side-by-side
Showing with 0 additions and 12697 deletions
targets/RTAI/LAUNCH_SCRIPTS/load_module.sh deleted 100644 → 0
View file @ 4c45400d
sh /opt/XIO2000/xio_script.sh
cd ../USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 4 1
rmmod -f openair_rf
cd ../..
make install_cbmimo1_softmodem_lte_emos_l2
cd LAUNCH_SCRIPTS
targets/RTAI/LAUNCH_SCRIPTS/nas_enb.sh deleted 100644 → 0
View file @ 4c45400d
#!/bin/sh
echo "start setting up eNB interface"
cd $OPENAIR2_DIR
sudo rmmod nasmesh
#make nasmesh_netlink_address_fix.ko
#make nasmesh_netlink.ko
#make nasmesh.ko
#make rb_tool
#route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
cd -
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.2 -r 3
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.1.1 -t 10.0.1.3 -r 11
echo "end setting up NAS interface"
targets/RTAI/LAUNCH_SCRIPTS/nas_ue.sh deleted 100644 → 0
View file @ 4c45400d
#!/bin/sh
echo "setting up UE NAS interface"
cd $OPENAIR2_DIR
sudo rmmod nasmesh
#make nasmesh_netlink_address_fix.ko
#make nasmesh_netlink.ko
#make nasmesh.ko
#make rb_tool
#route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
cd -
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
sudo ifconfig oai0 10.0.1.2 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.2 -t 10.0.1.1 -r 3
echo "end setting up NAS interface"
targets/RTAI/LAUNCH_SCRIPTS/nas_ue2.sh deleted 100644 → 0
View file @ 4c45400d
#!/bin/sh
echo "setting up UE NAS interface"
cd $OPENAIR2_DIR
sudo rmmod nasmesh
#make nasmesh_netlink_address_fix.ko
#make nasmesh_netlink.ko
#make nasmesh.ko
#make rb_tool
#route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
cd -
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
sudo ifconfig oai0 10.0.1.3 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.3 -t 10.0.1.1 -r 3
echo "end setting up NAS interface"
targets/RTAI/LAUNCH_SCRIPTS/start_eNb_mode1.sh deleted 100644 → 0
View file @ 4c45400d
sudo sh $OPENAIR1_DIR/xio_script.sh
sh stop_rf.sh
sh start_rf.sh
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 0 0 1 # dump Config
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 6 110 110 100 100 #Set TX gains
#$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 2 26 100 #Card v2_10 synched to v2_19
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 14 0 #SET RX RF Mode
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 32 1 #Set DLSCH Transmission Mod
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 1 0 0 #Start Primary Clusterhead
#$OPENAIR1_DIR/USERSPACE_TOOLS/SCOPE/lte_scope_ul 0 0 &
#$OPENAIR1_DIR/USERSPACE_TOOLS/SCOPE/lte_scope_ul 0 1 &
\ No newline at end of file
targets/RTAI/LAUNCH_SCRIPTS/start_eNb_mode2.sh deleted 100644 → 0
View file @ 4c45400d
sudo sh $OPENAIR1_DIR/xio_script.sh
sh stop_rf.sh
sh start_rf.sh
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 0 1 1
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 6 110 110 100 100
#$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 2 26 100 #Card v2_10 synched to v2_19
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 14 0
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 32 2
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 1 1 0
targets/RTAI/LAUNCH_SCRIPTS/start_eNb_mode6.sh deleted 100644 → 0
View file @ 4c45400d
cd USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 4 1
rmmod -f openair_rf
cd ../..
make install_cbmimo1_softmodem_lte_emos_l2
cd USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 0 1 1
./openair_rf_cbmimo1_lte 0 6 137 137 140 140
./openair_rf_cbmimo1_lte 0 14 2
./openair_rf_cbmimo1_lte 0 32 6
source /opt/XIO2000/xio_script.sh
./openair_rf_cbmimo1_lte 0 1 1 0
cd ../..
targets/RTAI/LAUNCH_SCRIPTS/start_emos.sh deleted 100644 → 0
View file @ 4c45400d
gpsd /dev/ttyUSB0
cd USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 4 1
rmmod -f openair_rf
cd ../..
make install_cbmimo1_softmodem_lte_emos_l2
cd EMOS/LTE/GUI
./emos_gui &
targets/RTAI/LAUNCH_SCRIPTS/start_rf.sh deleted 100644 → 0
View file @ 4c45400d
sudo insmod $OPENAIR2_DIR/RRC/LITE/MESSAGES/asn1_msg_kern.ko
sudo insmod $OPENAIR1_DIR/ARCH/CBMIMO1/DEVICE_DRIVER/openair_rf_softmodem.ko
\ No newline at end of file
targets/RTAI/LAUNCH_SCRIPTS/start_test_fs4.sh deleted 100644 → 0
View file @ 4c45400d
sh $OPENAIR1_DIR/xio_script.sh
cd ../USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 4 1
rmmod -f openair_rf
cd ../..
make install_cbmimo1_softmodem
cd USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 0 1 1
./openair_rf_cbmimo1_lte 0 26 100
./openair_rf_cbmimo1_lte 0 6 150 150 140 140
./openair_rf_cbmimo1_lte 0 14 0
./openair_rf_cbmimo1_lte 0 8 1
cd ../../LAUNCH_SCRIPTS
targets/RTAI/LAUNCH_SCRIPTS/start_ue.sh deleted 100644 → 0
View file @ 4c45400d
sudo sh $OPENAIR1_DIR/xio_script.sh
sh stop_rf.sh
sh start_rf.sh
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 0 0 1 # dump config
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 6 100 100 100 100 #Set TX gains
#./openair_rf_cbmimo1_lte 0 25 0
#./openair_rf_cbmimo1_lte 0 15 101 # Card v15 synched to card v38
#./openair_rf_cbmimo1_lte 0 15 117 # Card v15 synched to card v5
#./openair_rf_cbmimo1_lte 0 15 135 # Card v37 synched to card v5
#$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 15 89 # Card v42 synched to card v43
#$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 15 85 # Card v47 synched to card v43
#./openair_rf_cbmimo1_lte 0 26 400
#$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 15 103 # Card v47 synched to card v42
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 15 110 # Card v42 synched to card v47
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 14 0 #RF mode 0 = mixer low gain, lna off
#./openair_rf_cbmimo1_lte 0 14 1 #RF mode 1 = mixer low gain, lna on
#./openair_rf_cbmimo1_lte 0 14 2 #RF mode 2 = mixer high gain, lna on
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 3 1 0 #Start Node - param 0/1
targets/RTAI/LAUNCH_SCRIPTS/start_ue2.sh deleted 100644 → 0
View file @ 4c45400d
sudo sh $OPENAIR1_DIR/xio_script.sh
sh stop_rf.sh
sh start_rf.sh
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 0 0 1
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 6 100 100 100 100
#./openair_rf_cbmimo1_lte 0 25 0
#./openair_rf_cbmimo1_lte 0 15 101 # Card v15 synched to card v38
#./openair_rf_cbmimo1_lte 0 15 117 # Card v15 synched to card v5
#./openair_rf_cbmimo1_lte 0 15 135 # Card v37 synched to card v5
#./openair_rf_cbmimo1_lte 0 26 400
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 14 0 #RF mode 0 = mixer low gain, lna off
#./openair_rf_cbmimo1_lte 0 14 1 #RF mode 1 = mixer low gain, lna on
#./openair_rf_cbmimo1_lte 0 14 2 #RF mode 2 = mixer high gain, lna on
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 3 1 1
targets/RTAI/LAUNCH_SCRIPTS/stop_rf.sh deleted 100644 → 0
View file @ 4c45400d
killall lte_scope
killall lte_scope_ul
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 4 1
sudo rmmod -f nasmesh
sudo rmmod -f openair_rf
sudo rmmod -f asn1_msg_kern
targets/RTAI/Makefile deleted 100644 → 0
View file @ 4c45400d
# command line flags are automatically exported and thus passed down to any sub-make.
# here we set the default flags in case on command line flags are provided
# these flags have to be explicitely exported so that the sub-make is aware of them
ifndef OPENAIR_LTE
export OPENAIR_LTE=1
export OPENAIR_EMU=0
endif
ifndef OPENAIR1
export OPENAIR1=0
endif
ifndef OPENAIR2
export OPENAIR2=0
endif
ifndef OPENAIR3
export OPENAIR3=0
endif
ifndef EMOS
export EMOS=0
endif
ifndef rrc_cellular
export rrc_cellular = 0
export rrc_cellular_eNB = 0
export rrc_cellular_UE = 0
else
export rrc_cellular = 1
ifeq ($(eNB_flag),1)
export rrc_cellular_eNB=1
endif
ifeq ($(UE_flag),1)
export rrc_cellular_UE=1
endif
endif
all: openair_rf_cbmimo1_softmodem.ko asn1_msg_kern.ko nasmesh.ko rb_tool openair_rf scope
openair_rf_cbmimo1_softmodem.ko:
(cd $(OPENAIR1_DIR)/ARCH/CBMIMO1/DEVICE_DRIVER && $(MAKE) -C /usr/src/linux V=1 M=`pwd` RTAI=1 CBMIMO1=1 && mv openair_rf.ko $(CURDIR)/openair_rf_softmodem.ko)
oai_user_cbmimo1.ko:
(cd $(OPENAIR1_DIR)/ARCH/CBMIMO1/DEVICE_DRIVER && $(MAKE) -C /usr/src/linux V=1 M=`pwd` RTAI=1 CBMIMO1=1 BIT8_TX=1 OPENAIR1=0 OPENAIR2=0 && mv openair_rf.ko $(CURDIR)/openair_rf_softmodem.ko)
oai_user_exmimo.ko:
(cd $(OPENAIR1_DIR)/ARCH/CBMIMO1/DEVICE_DRIVER && $(MAKE) -C /usr/src/linux V=1 M=`pwd` RTAI=1 CBMIMO1=1 OPENAIR1=0 OPENAIR2=0 && mv openair_rf.ko $(CURDIR)/openair_rf_softmodem.ko)
asn1_msg_kern.ko:
(cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES && $(MAKE) -C /usr/src/linux V=0 M=`pwd` RTAI=1 -j2 && mv asn1_msg_kern.ko $(CURDIR)/asn1_msg_kern.ko)
nasmesh.ko:
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH && $(MAKE) V=1 -C /usr/src/linux M=`pwd` && mv nasmesh.ko $(CURDIR)/nasmesh.ko)
rb_tool:
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH/RB_TOOL && $(MAKE))
openair_rf:
(cd $(OPENAIR1_DIR)/USERSPACE_TOOLS/OPENAIR_RF && $(MAKE) clean CBMIMO1=1 && $(MAKE) all CBMIMO1=1 && $(MAKE) clean CBMIMO1=1)
scope:
(cd $(OPENAIR1_DIR)/USERSPACE_TOOLS/SCOPE && $(MAKE) clean && $(MAKE) all && $(MAKE) clean )
#Remove all but source files
cleanall:
(cd $(OPENAIR1_DIR) && $(MAKE) cleanall)
(cd $(OPENAIR2_DIR) && $(MAKE) cleanall)
fifos:
@for i in `seq 0 64`;\
do \
have_rtfX=`ls /dev/ |grep -c rtf$$i`;\
if [ "$$have_rtfX" -eq 0 ] ;then \
mknod -m 666 /dev/rtf$$i c 150 $$i; \
fi;\
done
openair0:
mknod /dev/openair0 c 127 0
chmod a+rw /dev/openair0
install_oai_user:
make fifos
insmod openair_rf_softmodem.ko
updatefw:
$(OPENAIR1_DIR)/USERSPACE_TOOLS/OAI_FW_INIT/updatefw -f $$OPENAIR0_DIR/express-mimo/software/sdr/main -s 0x43fffff0
boot_exmimo:
sudo make install_oai_user
$(OPENAIR1_DIR)/USERSPACE_TOOLS/OAI_FW_INIT/updatefw -f $$OPENAIR0_DIR/express-mimo/software/sdr/main -s 0x43fffff0
sleep 1
sudo rmmod openair_rf
sudo make install_oai_user
reboot_exmimo:
$(OPENAIR1_DIR)/USERSPACE_TOOLS/OAI_FW_INIT/updatefw -f $$OPENAIR0_DIR/express-mimo/software/sdr/main -s 0x43fffff0 -b
sudo rmmod openair_rf
sudo make install_oai_user
install_softmodem:
make fifos
ifeq ($(OPENAIR2),1)
insmod asn1_msg_kern.ko
endif
insmod openair_rf_softmodem.ko
remove:
rmmod openair_rf
ifeq ($(OPENAIR2),1)
rmmod asn1_msg_kern
endif
test:
(cd $(OPENAIR1_DIR)/ARCH/CBMIMO1/DEVICE_DRIVER && $(MAKE) test RTAI=1 CBMIMO1=1)
(cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES && $(MAKE) test)
clean:
(cd $(OPENAIR1_DIR)/ARCH/CBMIMO1/DEVICE_DRIVER && $(MAKE) clean RTAI=1 CBMIMO1=1)
(cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES && $(MAKE) clean)
targets/RTAI/USER/.runinfo deleted 100644 → 0
View file @ 4c45400d
sleeptest:lxrt+sem+mbx+msg+fifos:!./sleeptest;sleep 1;popall:control_c
synctest:lxrt+sem+mbx+msg+fifos:!./synctest -V;sleep 1;popall:control_c
condtest:lxrt+sem+mbx+msg+fifos:!sudo ./condtest;sleep 1;popall:control_c
msg_test:lxrt+sem+mbx+msg+fifos:!sudo ./msg_test;sleep 1;popall:control_c
msg_many:lxrt+sem+mbx+msg+fifos:!sudo ./msg_test;sleep 1;popall:control_c
eNB:lxrt+sem+mbx+msg+fifos:!sudo ./synctest;sleep 1;popall:control_c
eNB_test:lxrt+sem+mbx+msg+smi:!sudo ./lte-softmodem -S -F enb2tx;sleep 1;popall:control_c
UE:lxrt+sem+mbx+msg+fifos:!sudo ./synctest -U -d -T 108;sleep 1;popall:control_c
#UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907602944 -V;sleep 1;popall:control_c
#EXMIMO2 card 1
#UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600480 -V;sleep 1;popall:control_c
UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600480 -V -K /tmp/itti_UE0.log;sleep 1;popall:control_c
#EXMIMO2 card 5
#UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907597240 -V;sleep 1;popall:control_c
#EXMIMO2 card 24
#UE0_smbv:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907595776 -V;sleep 1;popall:control_c
#EXMIMO2 card 5?
UE0_smbv:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907598252 -V;sleep 1;popall:control_c
UE850:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 859498000 -F ex2_850;sleep 1;popall:control_c
eNB850:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -d -C 859500000 -F ex2_850;sleep 1;popall:control_c
UE0noL2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600480 --no-L2-connect;sleep 1;popall:control_c
UE0calib:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1912600000 --calib-ue-rx -70 ;sleep 1;popall:control_c
UE0calibmed:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1912600000 --calib-ue-rx-med -70 ;sleep 1;popall:control_c
UE0calibbyp:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1912600000 --calib-ue-rx-byp -70 ;sleep 1;popall:control_c
UE0prach:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1912606900 -F ue1 --debug-ue-prach;sleep 1;popall:control_c
UE1:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue1 ;sleep 1;popall:control_c
UE1prach:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue1 --debug-ue-prach;sleep 1;popall:control_c
UE1noL2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue1 --no-L2-connect;sleep 1;popall:control_c
UE2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue2;sleep 1;popall:control_c
UE2prach:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue2 --debug-ue-prach;sleep 1;popall:control_c
UE2noL2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue2 --no-L2-connect;sleep 1;popall:control_c
#eNB0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 1907600000 -d -V;sleep 1;popall:control_c
#eNB0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 1907598252 -d -V;sleep 1;popall:control_c
eNB0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -d -O../../PROJECTS/GENERIC-LTE-EPC/CONF/enb.sfr.sud.conf -V -K /tmp/itti_eNB0.log;sleep 1;popall:control_c
eNB1:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 1907600000 -F ex2_2 -d;sleep 1;popall:control_c
eNB2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 1907600000 -F ue2 -d;sleep 1;popall:control_c
dot11:lxrt+sem+mbx+msg+fifos:!sudo ./dot11 -C 1907600000 -d;sleep 1;popall:control_c
dot11_tx_test: lxrt+sem+mbx+msg+fifos:!sudo ./dot11 -C 1907600000 -d -t;sleep 1;popall:control_c
eNB2_750:lxrt+sem+mbx+msg+fifos:!sudo ./synctest_eNB -C 746000000 -F enb1tx_750 -d;sleep 1;popall:control_c
eNB2_1900:lxrt+sem+mbx+msg+fifos:!sudo ./synctest_eNB -C 19076000000 -F enb1tx_1900 -d;sleep 1;popall:control_c
emos-raw:lxrt+sem+mbx+msg+fifos:!sudo ./emos-raw -d -V;sleep 1;popall:control_c
targets/RTAI/USER/Makefile deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/Makefile.agilent deleted 100644 → 0
View file @ 4c45400d
include $(OPENAIR_TARGETS)/Makerules
include $(OPENAIR_TARGETS)/Makefile.common
GCCVERSION = $(shell gcc --version | grep ^gcc | sed 's/^.* //g')
ifeq "$(GCCVERSION)" "4.4.3"
CFLAGS += -Wno-packed-bitfield-compat
endif
ifeq "$(GCCVERSION)" "4.5.2"
CFLAGS += -Wno-packed-bitfield-compat
endif
ifeq "$(GCCVERSION)" "4.6.1"
CFLAGS += -Wno-packed-bitfield-compat
endif
CFLAGS += -O2
# Debug
CFLAGS += -g -ggdb
CFLAGS += -DDRIVER2013 -I$(OPENAIR_TARGETS)/ARCH/EXMIMO/USERSPACE/LIB/ -I$(OPENAIR_TARGETS)/ARCH/EXMIMO/DEFS -DENABLE_VCD_FIFO -DEXMIMO_IOT
SRC = lte-enb.c
ifndef RTAI
RTAI=1
endif
ifeq ($(RTAI),1)
CFLAGS += -DENABLE_RTAI_CLOCK -DRTAI
RTAI_OBJ = sched_dlsch.o sched_ulsch.o sched_rx_pdsch.o lte-enb.o rt_wrapper.o
else
OBJ = sched_dlsch.o sched_ulsch.o sched_rx_pdsch.o lte-enb.o rt_wrapper.o
CFLAGS += -DENABLE_USE_CPU_EXECUTION_TIME
endif
OBJ += $(OPENAIR1_DIR)/SIMULATION/TOOLS/taus.o $(OPENAIR_TARGETS)/SIMU/USER/init_lte.o $(OPENAIR_TARGETS)/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.o
TOP_DIR = $(OPENAIR1_DIR)
include $(OPENAIR1_DIR)/PHY/Makefile.inc
include $(OPENAIR1_DIR)/SCHED/Makefile.inc
OBJ += $(PHY_OBJS)
ifeq ($(RTAI),1)
RTAI_OBJ += $(SCHED_OBJS)
else
OBJ += $(SCHED_OBJS)
endif
#ifndef rrc_cellular
ifeq ($(rrc_cellular),0)
rrc_cellular = 0
rrc_cellular_eNB = 0
rrc_cellular_UE = 0
else
ifeq ($(eNB_flag),1)
rrc_cellular_eNB=1
endif
ifeq ($(UE_flag),1)
rrc_cellular_UE=1
endif
endif
export rrc_cellular
OPENAIR2_TOP = $(OPENAIR2_DIR)
include $(OPENAIR2_DIR)/LAYER2/Makefile.inc
include $(OPENAIR2_DIR)/UTIL/Makefile.inc
include $(OPENAIR2_DIR)/RRC/NAS/Makefile.inc
ifeq ($(RTAI),1)
LOG_OBJS=
RTAI_OBJ+=$(LOG_DIR)/vcd_signal_dumper.o
RTAI_OBJ+=$(LOG_DIR)/log.o
endif
include $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.inc
OBJ += $(LOG_OBJS)
ifndef OPENAIR2
OPENAIR2=1
endif
ifeq ($(OPENAIR2),1)
ASN1_MSG_OBJS1=$(addprefix $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/, $(ASN1_MSG_OBJS))
OBJ += $(L2_OBJS) $(LIST_OBJ) $(TIMER_OBJ) $(MEM_OBJ) $(OTG_OBJS) $(MATH_OBJS)
OBJ += $(OPENAIR1_DIR)/SIMULATION/ETH_TRANSPORT/netlink_init.o
OBJ += $(PDCP_DIR)/pdcp_thread.o
CFLAGS += -DOPENAIR2 -DNO_RRM -DPUCCH -DMAC_CONTEXT=1
endif
CFLAGS += $(L2_incl) $(UTIL_incl) $(UTILS_incl)
CFLAGS += -I$(OPENAIR1_DIR) -I$(OPENAIR2_DIR)/RRC/LITE/MESSAGES #-I$(OPENAIR3_DIR)/MESH -I$(OPENAIR3_DIR)/MESH/RRM
CFLAGS += -DNEW_FFT -DLOG_NO_THREAD
ifeq ($(XFORMS),1)
CFLAGS += -DXFORMS -I/usr/include/X11
LDFLAGS += -lforms
OBJ += $(OPENAIR1_DIR)/PHY/TOOLS/lte_phy_scope.o
OBJ += stats.o
endif
ifdef SMBV
CFLAGS += -DSMBV
endif
#CPUFLAGS = -mmmx -msse -msse2 -m32 -mssse3 -msse4.1
CPUFLAGS = -mmmx -msse -msse2 -mssse3 -msse4.1
#CFLAGS += -fno-common -mpreferred-stack-boundary=4
CFLAGS += -Wall -fno-strict-aliasing -DPHYSIM -DUSER_MODE -DPC_TARGET -DPC_DSP -DNB_ANTENNAS_RX=2 -DNB_ANTENNAS_TXRX=2 -DNB_ANTENNAS_TX=2 -DPHY_CONTEXT=1 -rdynamic $(CPUFLAGS) # -Wno-packed-bitfield-compat
CFLAGS += -DOPENAIR_LTE -DENABLE_FXP -DOPENAIR1 -DDLSCH_THREAD #-DULSCH_THREAD
#only for CBMIMO1
ifdef CBMIMO1
CFLAGS += -DFW2011 -DBIT8_TX -DCBMIMO1
else
#only for EXPRESS MIMO
CFLAGS += -DEXMIMO
#CFLAGS += -DEXMIMO -DTIMING_ADVANCE_HW=138 #this is for ExpressMIMO 1
#CFLAGS += -DEXMIMO -DTIMING_ADVANCE_HW=45 #this is for ExpressMIMO 2
endif
ifndef HARD_RT
HARD_RT=1
endif
ifeq ($(HARD_RT),1)
CFLAGS += -DHARD_RT
endif
ifeq ($(EMOS),1)
CFLAGS += -DEMOS -DEMOS_CHANNEL
LDFLAGS += -lgps
endif
ifndef NAS
NAS=1
endif
ifeq ($(NAS),1)
CFLAGS += -DNAS_NETLINK -DLINUX
OBJ += $(NAS_OBJS)
endif
RTAI_CFLAGS += $(shell rtai-config --lxrt-cflags)
CFLAGS += -I/usr/realtime/include -DRTAI
LDFLAGS += -lpthread -lm -lforms
ifeq ($(RTAI),1)
LDFLAGS += $(shell rtai-config --lxrt-ldflags)
else
LDFLAGS += -lrt
endif
#ifndef USE_MME
# USE_MME=R8
#endif
ifdef USE_MME
include $(OPENAIR2_DIR)/S1AP/Makefile.inc
include $(OPENAIR2_DIR)/S1AP/MESSAGES/Makefile.inc
CFLAGS += -DENABLE_USE_MME -DENB_MODE
LDFLAGS += -lsctp
CFLAGS_S1AP += -DENB_MODE -DENABLE_USE_MME -DEMIT_ASN_DEBUG=1 -DUSER_MODE
S1AP_BUILT_OBJS += $(S1AP_OBJS) $(addprefix $(OPENAIR2_DIR)/S1AP/MESSAGES/, $(S1AP_ASN_MODULE_SOURCES))
S1AP_BUILT_OBJS += $(OPENAIR3_DIR)/OPENAIRMME/SCTP/sctp_primitives_client.o
endif
ASN1RELDIR=R9.8
ifeq ($(USE_MME), R8)
ASN1RELDIR=R8.10
else
CFLAGS_S1AP += -DUPDATE_RELEASE_9
endif
S1AP_DIR=$(OPENAIR2_DIR)/S1AP
ASN1MESSAGESDIR=$(S1AP_DIR)/MESSAGES
ASN1DIR=$(ASN1MESSAGESDIR)/ASN1
all: lte-enb
$(LFDS_DIR)/bin/liblfds611.a:
$(MAKE) -C $(LFDS_DIR) -f makefile.linux
$(RTAI_OBJ): %.o : %.c
@echo Compiling $< ...
@$(CC) -c $(CFLAGS) $(EXTRA_CFLAGS) $(RTAI_CFLAGS) -o $@ $<
$(OBJ) $(ASN1_MSG_OBJS1): %.o : %.c
@echo Compiling $< ...
@$(CC) -c $(CFLAGS) $(EXTRA_CFLAGS) -o $@ $<
$(S1AP_BUILT_OBJS): %.o : %.c
@echo Compiling $<
@$(CC) -Wall -c $(CFLAGS_S1AP) $(S1AP_Incl) $(UTIL_incl) -o $@ $<
$(ASN1MESSAGESDIR)/s1ap_ieregen.stamp: $(ASN1DIR)/$(ASN1RELDIR)/S1AP-PDU-Contents.asn $(ASN1DIR)/asn1tostruct.py
echo Timestamp > $@
(cd $(ASN1DIR) && python $(ASN1DIR)/asn1tostruct.py -f$<)
$(ASN1MESSAGESDIR)/s1ap_asn1regen.stamp: $(ASN1DIR)/$(ASN1RELDIR)/S1AP-CommonDataTypes.asn $(ASN1DIR)/$(ASN1RELDIR)/S1AP-Constants.asn $(ASN1DIR)/$(ASN1RELDIR)/S1AP-IEs.asn $(ASN1DIR)/$(ASN1RELDIR)/S1AP-PDU.asn
echo Timestamp > $@
(cd $(ASN1MESSAGESDIR) && asn1c -gen-PER -fnative-types -fskeletons-copy $^)
$(S1AP_DIR)/libs1ap.a: $(ASN1MESSAGESDIR)/s1ap_ieregen.stamp $(ASN1MESSAGESDIR)/s1ap_asn1regen.stamp $(S1AP_BUILT_OBJS)
@echo Creating $@
$(AR) rcs $@ $^
$(LFDS_DIR)/bin/liblfds611.a:
$(MAKE) -C $(LFDS_DIR) -f makefile.linux
ifdef USE_MME
lte-enb: $(OBJ) $(S1AP_DIR)/libs1ap.a $(ASN1_MSG_OBJS1) $(RTAI_OBJ) $(LFDS_DIR)/bin/liblfds611.a
else
lte-enb: $(OBJ) $(ASN1_MSG_OBJS1) $(RTAI_OBJ) $(LFDS_DIR)/bin/liblfds611.a
endif
$(CC) $(CFLAGS) $(EXTRA_CFLAGS) $(OBJ) $(RTAI_OBJ) $(ASN1_MSG_OBJS1) -o lte-enb $(LDFLAGS) $(LFDS_DIR)/bin/liblfds611.a
nasmesh:
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH/RB_TOOL && $(MAKE))
(cd $(OPENAIR2_DIR) && $(MAKE) nasmesh_netlink.ko)
(sudo insmod $(OPENAIR2_DIR)/NAS/DRIVER/MESH/nasmesh.ko)
rb_tool:
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH/RB_TOOL && $(MAKE))
nasmesh_install:
(sudo rmmod nasmesh)
(sudo insmod $(OPENAIR2_DIR)/NAS/DRIVER/MESH/nasmesh.ko)
clean:
rm -rf $(OBJ) $(RTAI_OBJ)
rm -f $(S1AP_BUILT_OBJS)
rm -f $(ASN1MESSAGESDIR)/libs1ap.a
cleanasn1:
rm -f $(ASN1_MSG_OBJS1)
$(shell cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES ; rm -f $(ASN_MODULE_SOURCES) $(ASN_MODULE_HEADERS) *.o *.d )
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.am.sample
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.inc.generated
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel8
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel10
cleanall: clean cleanasn1
rm -rf condtest synctest lte-softmodem
rm -rf synctest_eNB synctest_UE
show:
@echo $(CFLAGS)
@echo $(EXTRA_CFLAGS)
@echo $(OBJ) $(RTAI_OBJ)
@echo rrc_cellular variable is $(rrc_cellular)
@echo eNB_flag is $(eNB_flag)
@echo UE_flag is $(UE_flag)
@echo IS_REL8 is $(IS_REL8)
@echo IS_REL10 is $(IS_REL10)
beautiful:
astyle --style=gnu -s2 $(SRC)
targets/RTAI/USER/Makefile.msg_many deleted 100644 → 0
View file @ 4c45400d
CFLAGS = $(shell rtai-config --lxrt-cflags)
LDFLAGS = $(shell rtai-config --lxrt-ldflags) -lpthread -llxrt -lm
CFLAGS += -D__IN_RTAI__ -Wall -O2 -I.
OBJS = msg_many.o msg_helper.o
all: msg_many
msg_many: $(OBJS)
$(CC) $(LDFLAGS) -o $@ $(OBJS)
$(OBJS): msg_many.h
run: msg_many
rtai-load msg_many --verbose
.PHONY: clean
clean:
rm -f msg_many $(OBJS)
targets/RTAI/USER/TOOLS/thread_ipc.c deleted 100644 → 0
View file @ 4c45400d
#include <stdio.h>
#include <errno.h>
#include <string.h>
#include <stdlib.h>
#include <pthread.h>
#include <sched.h>
#include "thread_ipc.h"
g_thread_ipc_t thread_ipc = {0};
void loop_buffer_reset(buffer_t *loop_buf)
{
int i;
for (i = 0; i < BUFFERMAX; i++) {
loop_buf[i].subframe_num = -1;
}
return;
}
static void loop_buffer_init(loop_buffer_op_t *loop_buffer)
{
loop_buffer->packet_num = 0;
loop_buffer->isfull = 0;
loop_buffer->isempty = 1;
pthread_mutex_init(&loop_buffer->buffer_mutex, NULL);
pthread_cond_init(&loop_buffer->full_cond, NULL);
pthread_cond_init(&loop_buffer->empty_cond, NULL);
loop_buffer_reset(loop_buffer->loop_buf);
return;
}
static void sync_buffer_init(sync_buffer_t *sync_buffer)
{
sync_buffer->decoding_subframe_num = 0;
pthread_mutex_init(&sync_buffer->buffer_mutex, NULL);
return;
}
int thread_ipc_init(void)
{
//printf("recv %d\n", thread_ipc.sync_buffer.decoding_subframe_num);
thread_ipc.ue_sync_state = 0;
thread_ipc.rx_timestamp = 0;
thread_ipc.tx_timestamp = 0;
thread_ipc.current_subframe = 0;
pthread_mutex_init(&thread_ipc.dl_decode_mutex, NULL);
pthread_mutex_lock(&thread_ipc.dl_decode_mutex);
pthread_mutex_init(&thread_ipc.ul_send_mutex, NULL);
pthread_mutex_lock(&thread_ipc.ul_send_mutex);
pthread_mutex_init(&thread_ipc.sync_mutex, NULL);
pthread_mutex_lock(&thread_ipc.sync_mutex);
loop_buffer_init(&thread_ipc.loop_buffer);
sync_buffer_init(&thread_ipc.sync_buffer);
return 0;
}
int thread_ipc_deinit(void)
{
pthread_mutex_destroy(&thread_ipc.ul_send_mutex);
pthread_mutex_destroy(&thread_ipc.sync_mutex);
pthread_mutex_destroy(&thread_ipc.dl_decode_mutex);
pthread_mutex_destroy(&thread_ipc.loop_buffer.buffer_mutex);
pthread_cond_destroy(&thread_ipc.loop_buffer.full_cond);
pthread_cond_destroy(&thread_ipc.loop_buffer.empty_cond);
pthread_mutex_destroy(&thread_ipc.sync_buffer.buffer_mutex);
return 0;
}
int set_thread_attr(pthread_attr_t *attr, int policy, int priority, int cpuid)
{
struct sched_param param;
cpu_set_t cpu_info;
pthread_attr_init(attr);
if (pthread_attr_setschedpolicy(attr, policy) != 0) {
perror("pthread_attr_setschedpolicy");
return -1;
}
param.sched_priority = priority;
if (pthread_attr_setschedparam(attr, &param) != 0) {
perror("pthread_attr_setschedparam");
return -1;
}
CPU_ZERO(&cpu_info);
CPU_SET(cpuid, &cpu_info);
if (pthread_attr_setaffinity_np(attr,sizeof(cpu_set_t),&cpu_info)) {
perror("pthread_attr_setaffinity_np");
return -1;
}
if (pthread_attr_setinheritsched(attr, PTHREAD_EXPLICIT_SCHED) != 0) {
perror("pthread_attr_setinheritsched");
return -1;
}
return 0;
}
int find_subframe_num(unsigned long long current_subframe_num, buffer_t *buf, int *flag)
{
long long tmp;
int i;
tmp = current_subframe_num;
for ( i = 0; i < HIGHBUFFER + 1; i++)
{
if(tmp == buf[i].subframe_num)
{
return i;
} else if (tmp < buf[i].subframe_num) {
*flag = 1;
}
}
return -1;
}
int ue_unsync_thread_ipc_reset(void)
{
thread_ipc.ue_sync_state = 0;
pthread_mutex_lock(&thread_ipc.loop_buffer.buffer_mutex);
if (thread_ipc.loop_buffer.isempty) {
pthread_cond_signal(&thread_ipc.loop_buffer.empty_cond);
}
if (thread_ipc.loop_buffer.isfull) {
pthread_cond_signal(&thread_ipc.loop_buffer.full_cond);
}
thread_ipc.loop_buffer.packet_num = 0;
thread_ipc.loop_buffer.isfull = 0;
thread_ipc.loop_buffer.isempty = 1;
loop_buffer_reset(thread_ipc.loop_buffer.loop_buf);
pthread_mutex_unlock(&thread_ipc.loop_buffer.buffer_mutex);
thread_ipc.current_subframe = 0;
return 0;
}
void bind_thread2kernel(int cpu_id)
{
cpu_set_t mask;
cpu_set_t get;
int i;
int num = sysconf(_SC_NPROCESSORS_CONF);
//printf("system has %d processor(s) by super\n", num);
CPU_ZERO(&mask);
CPU_SET(cpu_id, &mask);
if (pthread_setaffinity_np(pthread_self(), sizeof(mask), &mask) < 0) {
fprintf(stderr, "set thread affinity failed\n");
}
/*CPU_ZERO(&get);
if (pthread_getaffinity_np(pthread_self(), sizeof(get), &get) < 0) {
fprintf(stderr, "get thread affinity failed\n");
}
for (i = 0; i < num; i++) {
if (CPU_ISSET(i, &get)) {
printf("thread %d is running in processor %d\n", (int)pthread_self(), i);
}
}
if (CPU_ISSET(cpu_id, &get)) {
printf("thread %d is running in processor %d by super\n", (int)pthread_self(), cpu_id);
}*/
}
void get_thread2kernel(void)
{
cpu_set_t get;
int i;
int num = sysconf(_SC_NPROCESSORS_CONF);
printf("system has %d processor(s) by super\n", num);
CPU_ZERO(&get);
if (pthread_getaffinity_np(pthread_self(), sizeof(get), &get) < 0) {
fprintf(stderr, "get thread affinity failed\n");
}
for (i = 0; i < num; i++) {
if (CPU_ISSET(i, &get)) {
printf("The thread %d is running in processor %d by super\n", (int)pthread_self(), i);
}
}
}
targets/RTAI/USER/TOOLS/thread_ipc.h deleted 100644 → 0
View file @ 4c45400d
#ifndef __THREAD_IPC_H__
#define __THREAD_IPC_H__
#define SUB_FRAME_LENGTH 7680
#define FRAME_LENGTH 76800
#define UE_UL_DELAY 6 /*设置上行组帧在同步时钟基础上的延时（子帧个数）*/
#define UE_UL_SEND_DELAY 6 /*上行发送子帧号在接收子帧时间戳上的延时（子帧个数）*/
#define BUFFERMAX 5 /*环形缓冲区个数*/
#define LOWBUFFER 3 /*环形缓冲区下限, 不能为0*/
#define HIGHBUFFER 4 /*环形缓冲区上限*/
typedef struct {
long long subframe_num; /*子帧编号*/
int buffer[SUB_FRAME_LENGTH * 2]; /*一子帧数据*/
}buffer_t;
typedef struct {
int packet_num; /*环形缓冲区数据包计数器，表示环形缓冲区有效数据包个数*/
int isfull; /*标记环形缓冲区有效数据包是否达到上限标志*/
int isempty; /*标记环形缓冲区有效数据包是否达到下限标志*/
pthread_mutex_t buffer_mutex; /*环形缓冲区操作保护锁*/
pthread_cond_t full_cond; /*环形缓冲区上限条件变量,配合isfull使用 */
pthread_cond_t empty_cond; /*环形缓冲区下限条件变量,配合isempty使用*/
buffer_t loop_buf[BUFFERMAX]; /*环形缓冲区*/
}loop_buffer_op_t;
typedef struct {
int decoding_subframe_num; /*待解码子帧的编号*/
pthread_mutex_t buffer_mutex; /*对sync_buffer临界区的保护锁*/
int sync_buffer[SUB_FRAME_LENGTH * 10]; /*同步线程与下行解码线程数据共享缓冲区*/
}sync_buffer_t;
typedef struct {
unsigned int rx_timestamp; /*接收数据包第一个sample时间戳*/
unsigned int tx_timestamp; /*待发送数据包的时间戳*/
unsigned long long current_subframe; /*当前子帧编号*/
int ue_sync_state; /*表示UE是否在同步状态，0表示失同步，1表示同步*/
pthread_mutex_t sync_mutex; /*根据ue_sync_state标志，唤醒组帧线程*/
pthread_mutex_t ul_send_mutex; /*用于sync线程唤醒发送线程发送数据*/
pthread_mutex_t dl_decode_mutex;/*下行解码保护锁，用于sync线程唤醒解码线程解码*/
loop_buffer_op_t loop_buffer;
sync_buffer_t sync_buffer;
}g_thread_ipc_t;
void loop_buffer_reset(buffer_t *loop_buf);
int thread_ipc_init(void);
int thread_ipc_deinit(void);
int set_thread_attr(pthread_attr_t *attr, int policy, int priority, int cpuid);
int find_subframe_num(unsigned long long current_subframe_num, buffer_t *buf, int *flag);
int ue_unsync_thread_ipc_reset(void);
extern g_thread_ipc_t thread_ipc;
#endif
targets/RTAI/USER/condtest.c deleted 100644 → 0
View file @ 4c45400d
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sched.h>
#include <rtai_lxrt.h>
#include <rtai_sem.h>
#include <rtai_msg.h>
#define PERIOD 100000000
#define THRESHOLD 1
static SEM *mutex;
static CND *cond;
static int thread0;
static int thread1;
static int instance_cnt=-1; //0 means worker is busy, -1 means its free
static void *fun0(void *arg)
{
RT_TASK *task;
int done1=0, cnt1=0;
RTIME right_now;
int ret;
task = rt_task_init_schmod(nam2num("TASK0"), 0, 0, 0, SCHED_FIFO, 0xF);
mlockall(MCL_CURRENT | MCL_FUTURE);
rt_make_hard_real_time();
while (cnt1 < THRESHOLD)
{
rt_sem_wait(mutex);
rt_printk("fun0: Hello World %d, instance_cnt %d!\n",cnt1,instance_cnt);
while (instance_cnt<0)
{
ret = rt_cond_wait(cond, mutex);
if (ret != 0)
{
rt_printk("error in rt_cond_wait, code %d\n",ret);
switch (ret)
{
case RTE_PERM:
rt_printk("error RTE_PERM %d\n",ret);
break;
case RTE_UNBLKD:
rt_printk("error RTE_UNBLKD %d\n",ret);
break;
case RTE_OBJREM:
rt_printk("error RTE_OBJREM %d\n",ret);
break;
default:
rt_printk("unknown error code %d\n",ret);
break;
}
break;
}
}
rt_sem_signal(mutex);
// do some work here
cnt1++;
rt_sem_wait(mutex);
instance_cnt--;
rt_sem_signal(mutex);
}
// makes task soft real time
rt_make_soft_real_time();
printf("Back to soft RT\n");
// clean task
rt_task_delete(task);
printf("Task deleted. returning\n");
return 0;
}
int main(void)
{
RT_TASK *task;
RTIME now;
int cnt=0;
// make main thread LXRT soft realtime
task = rt_task_init_schmod(nam2num("MYTASK"), 9, 0, 0, SCHED_FIFO, 0xF);
mlockall(MCL_CURRENT | MCL_FUTURE);
// start realtime timer and scheduler
//rt_set_oneshot_mode();
rt_set_periodic_mode();
start_rt_timer(0);
now = rt_get_time() + 10*PERIOD;
rt_task_make_periodic(task, now, PERIOD);
printf("Init mutex and cond.\n");
mutex = rt_sem_init(nam2num("MUTEX"), 1);
if (mutex==0)
printf("Error init mutex\n");
cond = rt_cond_init(nam2num("CONDITION"));
if (cond==0)
printf("Error init cond\n");
thread0 = rt_thread_create(fun0, NULL, 10000);
//thread1 = rt_thread_create(fun1, NULL, 20000);
//rt_sleep(PERIOD);
while (cnt < THRESHOLD)
{
rt_task_wait_period();
rt_printk("main: Hello World %d!\n",cnt);
rt_sem_wait(mutex); //now the mutex should have value 0
if (instance_cnt==0)
{
rt_sem_signal(mutex); //now the mutex should have vaule 1
rt_printk("worker thread busy!\n");
}
else
{
instance_cnt++;
rt_cond_signal(cond);
rt_sem_signal(mutex); //now the mutex should have vaule 1
rt_printk("signaling worker thread to start!\n");
}
cnt++;
}
// wait for end of program
printf("TYPE <ENTER> TO TERMINATE\n");
getchar();
// cleanup
stop_rt_timer();
return 0;
}
targets/RTAI/USER/dot11.c deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/emos-raw.c deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/enb2tx_850rflo.lime deleted 100644 → 0
View file @ 4c45400d
8254992 8254992 8257340 8257340
\ No newline at end of file
targets/RTAI/USER/enb2txrflo.lime deleted 100644 → 0
View file @ 4c45400d
8254744 8255063 8257340 8257340
targets/RTAI/USER/enb2txrxg.lime deleted 100644 → 0
View file @ 4c45400d
# this file contains the calibration values to compute the RSSI
# we can use three different gain stages (high, low, med) as well as a gain factor for fine tuning
# the three lines in this file gives the total rx gain in dB for the three gain stages if the rx gain is set to 30dB
# high gain
138 138 138 138
# med gain
129 129 129 129
# low gain
120 120 120 120
targets/RTAI/USER/enb2txtxg.lime deleted 100644 → 0
View file @ 4c45400d
# For the TX, we need to set the tx gain values such that the transmitted power on all antennas is the same
# tx gain (dB)
25 19 25 25
# total tx power (dBm)
17
targets/RTAI/USER/enb4txrflo.lime deleted 100644 → 0
View file @ 4c45400d
8255067 8254810 8257340 8257340
targets/RTAI/USER/enb4txrxg.lime deleted 100644 → 0
View file @ 4c45400d
133 133 133 133
127 127 127 127
120 120 120 120
targets/RTAI/USER/ex2_2rflo.lime deleted 100644 → 0
View file @ 4c45400d
8256036 8256804 8257340 8257340
targets/RTAI/USER/ex2_2rxg.lime deleted 100644 → 0
View file @ 4c45400d
# this file contains the calibration values to compute the RSSI
# we can use three different gain stages (high, low, med) as well as a gain factor for fine tuning
# the three lines in this file gives the total rx gain in dB for the three gain stages if the rx gain is set to 30dB
# this is for Express MIMO2 without any additional RF frontend
# high gain
124 124 124 124
# med gain
118 118 118 118
# low gain (byp)
109 109 109 109
targets/RTAI/USER/ex2_2txg.lime deleted 100644 → 0
View file @ 4c45400d
# For the TX, we need to set the tx gain values such that the transmitted power on all antennas is the same
# tx gain (dB)
# 25 19 25 25
10 10 10 10
# total tx power (dBm)
17
targets/RTAI/USER/ex2_850rflo.lime deleted 100644 → 0
View file @ 4c45400d
8254212 8256991 8257340 8257340
targets/RTAI/USER/ex2_850rxg.lime deleted 100644 → 0
View file @ 4c45400d
# this file contains the calibration values to compute the RSSI
# we can use three different gain stages (high, low, med) as well as a gain factor for fine tuning
# the three lines in this file gives the total rx gain in dB for the three gain stages if the rx gain is set to 30dB
# this is for Express MIMO2 without any additional RF frontend
# high gain
124 124 124 124
# med gain
118 118 118 118
# low gain (byp)
109 109 109 109
targets/RTAI/USER/ex2_850txg.lime deleted 100644 → 0
View file @ 4c45400d
# For the TX, we need to set the tx gain values such that the transmitted power on all antennas is the same
# tx gain (dB)
# 25 19 25 25
0 0 0 0
# total tx power (dBm)
17
targets/RTAI/USER/ieee80211p-softmodem.c deleted 100644 → 0
View file @ 4c45400d
/******************************************************************************
*
* Copyright(c) EURECOM / Thales Communications & Security
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Thales Communications & Security <philippe.agostini@thalesgroup.com>
*
*****************************************************************************/
/******************************************************************************
*
* Includes
*
*****************************************************************************/
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include "ieee80211p-netlinkapi.h"
#include "phy/DOT11/defs.h"
#include "PHY/TOOLS/defs.h"
#include <stdint.h>
#include <string.h>
#include <pthread.h>
#include <rtai_lxrt.h>
#include <rtai_sem.h>
#include <rtai_msg.h>
/******************************************************************************
*
* Definitions
*
*****************************************************************************/
enum nl80211_band {
NL80211_BAND_2GHZ,
NL80211_BAND_5GHZ,
NL80211_BAND_5_9GHZ,
NL80211_BAND_0_8GHZ,
};
enum ieee80211_band {
IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
IEEE80211_BAND_5_9GHZ = NL80211_BAND_5_9GHZ,
IEEE80211_BAND_0_8GHZ = NL80211_BAND_0_8GHZ,
};
struct ieee80211p_rx_status {
short data_len; //frame data length in bytes
char rssi; //received power in dBm
char rate; //reveived data rate in units of 100 kbps
enum ieee80211_band band;
char flags; //RX flags
}; /* struct ieee80211p_rx_status */
extern uint32_t *txdata[2],*rxdata[2];
//CHANNEL_STATUS_t dot11_state = IDLE;
extern int oai_exit;
extern unsigned int *DAQ_MBOX;
extern int Ndbps[8];
extern int32_t rxDATA_F_comp_aggreg2[48*1024];
extern int32_t rxDATA_F_comp_aggreg3[48*1024];
extern uint32_t rxgain[4];
extern uint32_t rxg_max[4], rxg_med[4], rxg_byp[4];
#define FRAME_LENGTH_SAMPLES 76800
#define RX_THRES 60
#define SLOT_DURATION_5MHz 105
#define RX_THRES_dB 40
int tx_sdu_active = 0;
int tx_sdu_length = 0;
char rxsdu[2000];
void *tx_thread(void *arg) {
int fd=*((int*)arg);
RT_TASK *task;
int ret;
int i;
char dummy_data[10];
if (fd > 0) {
ret = netlink_send(fd,NLCMD_INIT,10,&dummy_data[0]);
printf("tx_thread starting, fd %d\n",fd);
task = rt_task_init_schmod(nam2num("TASK1"), 0, 0, 0, SCHED_FIFO, 0xF);
mlockall(MCL_CURRENT | MCL_FUTURE);
// rt_make_hard_real_time();
while (!oai_exit) {
if (tx_sdu_active == 1)
printf("tx_thread: waiting (MBOX %d)\n",((unsigned int*)DAQ_MBOX)[0]);
while(((volatile int)tx_sdu_active) != 0) {
rt_sleep(nano2count(66666));
}
printf("tx_thread: calling netlink\n");
ret = netlink_recv(fd,rxsdu);
tx_sdu_active = 1;
tx_sdu_length = ret;
/*
if (ret > 0) {
printf("received TX SDU: ");
for (i=0;i<ret;i++) {
printf("%02hhx ",rxsdu[i]);
}
printf("\n");
}
*/
}
}
else {
printf("tx_thread: no netlink\n");
}
printf("tx_thread exiting\n");
return(0);
}
/******************************************************************************
*
* Main
*
*****************************************************************************/
/*
int dot11_netlink_init() {
int fd;
int ret;
int i;
char txdata[10];
fd = netlink_init();
if (fd < 0) {
return -1;
}
ret = netlink_send(fd,NLCMD_INIT,10,&txdata[0]);
return(fd);
}
*/
targets/RTAI/USER/init_exmimo.sh deleted 100644 → 0
View file @ 4c45400d
sudo rmmod openair_rf
sudo insmod $OPENAIR1_DIR/ARCH/CBMIMO1/DEVICE_DRIVER/openair_rf_softmodem.ko
sudo mknod /dev/openair0 c 127 0
sudo chmod a+rw /dev/openair0
$OPENAIR1_DIR/USERSPACE_TOOLS/OAI_FW_INIT/updatefw -f $OPENAIR1_DIR/USERSPACE_TOOLS/OAI_FW_INIT/main -s 0x43fffff0
sudo rmmod openair_rf
sudo insmod $OPENAIR1_DIR/ARCH/CBMIMO1/DEVICE_DRIVER/openair_rf_softmodem.ko
sudo rmmod nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
targets/RTAI/USER/init_exmimo2.sh deleted 100644 → 0
View file @ 4c45400d
#!/bin/bash
PCI=`lspci -m | grep Xilinx`
if [ -z "$PCI" ]; then
echo "No card found. Stopping!"
return
fi
## This part corrects the wrong configuration of the endpoint done by the bios in some machines
echo "$PCI" | while read config_reg; do
SLOT_NUMBER=`echo $config_reg | awk -F\" '{print $1}'`
sudo setpci -s $SLOT_NUMBER 60.b=10
done
sudo rmmod openair_rf
sudo insmod $OPENAIR_TARGETS/ARCH/EXMIMO/DRIVER/eurecom/openair_rf.ko
sleep 1
if [ ! -e /dev/openair0 ]; then
sudo mknod /dev/openair0 c 127 0
sudo chmod a+rw /dev/openair0
fi
DEVICE=`echo $PCI | awk -F\" '{print $(NF-1)}' | awk '{print $2}'`
if [ $DEVICE == '2208' ]; then
echo "Using firmware version 8"
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2
else
if [ $DEVICE == '2209' ]; then
echo "Using firmware version 9"
#$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR0_DIR/express-mimo/software/sdr/exmimo2/sdr_expressmimo2
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v9
else
if [ $DEVICE == '220a' ]; then
echo "Using firware version 10"
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10
else
echo 'No corresponding firmware found'
return
fi
fi
fi
sudo rmmod nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
if [ "$1" = "eNB" ]; then
echo "bring up oai0 interface for enb"
sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.9 -r 1
else
if [ "$1" = "UE" ]; then
echo "bring up oai0 interface for UE"
sudo ifconfig oai0 10.0.1.9 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.9 -t 10.0.1.1 -r 1
fi
fi
targets/RTAI/USER/lte-enb.c deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/lte-softmodem-usrp.c deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/lte-softmodem.c deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/lte_scope.c deleted 100644 → 0
View file @ 4c45400d
/* Form definition file generated by fdesign */
#include <stdlib.h>
#include "lte_scope.h"
/***************************************
***************************************/
FD_lte_scope *
create_form_lte_scope( void )
{
FL_OBJECT *obj;
FD_lte_scope *fdui = fl_malloc( sizeof *fdui );
fdui->vdata = fdui->cdata = NULL;
fdui->ldata = 0;
fdui->lte_scope = fl_bgn_form( FL_NO_BOX, 780, 723 );
obj = fl_add_box( FL_ROUNDED_BOX, 0, 0, 780, 723, "" );
fl_set_object_color( obj, FL_BLACK, FL_BLUE );
fdui->channel_t_re[0] = obj = fl_add_xyplot( FL_NORMAL_XYPLOT, 20, 20, 280, 100, "Real(RX0)" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_BLUE );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->channel_t_im[0] = obj = fl_add_xyplot( FL_NORMAL_XYPLOT, 310, 20, 280, 100, "Imag(RX0)" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_BLUE );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->channel_t_re[1] = obj = fl_add_xyplot( FL_NORMAL_XYPLOT, 20, 140, 280, 100, "Real(RX1)" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_RED );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->channel_t_im[1] = obj = fl_add_xyplot( FL_NORMAL_XYPLOT, 310, 140, 280, 100, "Imag(RX1)" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_RED );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->channel_t_re[2] = obj = fl_add_xyplot( FL_NORMAL_XYPLOT, 20, 260, 280, 100, "Real(RX2)" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_GREEN );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->channel_t_im[2] = obj = fl_add_xyplot( FL_NORMAL_XYPLOT, 310, 260, 280, 100, "Imag(RX2)" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_GREEN );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->channel_t_re[3] = obj = fl_add_xyplot( FL_NORMAL_XYPLOT, 20, 380, 280, 100, "Real(RX3)" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_YELLOW );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->channel_t_im[3] = obj = fl_add_xyplot( FL_NORMAL_XYPLOT, 310, 380, 280, 100, "Imag(RX3)" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_YELLOW );
fl_set_object_lcolor( obj, FL_WHITE );
/*
fdui->scatter_plot = obj = fl_add_xyplot( FL_POINTS_XYPLOT, 600, 230, 160, 190, "PBCH Scatter Plot" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_GREEN );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->scatter_plot2 = obj = fl_add_xyplot( FL_POINTS_XYPLOT, 600, 440, 160, 190, "PDSCH/PUSCH Scatter Plot" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_YELLOW );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->scatter_plot1 = obj = fl_add_xyplot( FL_POINTS_XYPLOT, 600, 20, 160, 190, "PDCCH Scatter Plot" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_CYAN );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->ia_receiver_button = obj = fl_add_button( FL_PUSH_BUTTON, 620, 660, 130, 40, "IA receiver OFF" );
fl_set_object_lalign( obj, FL_ALIGN_CENTER );
fl_set_object_color( obj, FL_RED, FL_RED);
fl_set_object_callback( obj, ia_receiver_on_off, 0 );
fdui->tput = obj = fl_add_xyplot( FL_NORMAL_XYPLOT, 20, 560, 570, 140, "Throughput [kbits/s]" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_WHITE );
fl_set_object_lcolor( obj, FL_WHITE );
*/
fl_end_form( );
fdui->lte_scope->fdui = fdui;
return fdui;
}
targets/RTAI/USER/lte_scope.fd deleted 100644 → 0
View file @ 4c45400d
Magic: 14000
Internal Form Definition File
(do not change)
Number of forms: 1
Unit of measure: FL_COORD_PIXEL
=============== FORM ===============
Name: lte_scope
Width: 780
Height: 723
Number of Objects: 11
--------------------
class: FL_BOX
type: ROUNDED_BOX
box: 0 0 780 723
boxtype: FL_ROUNDED_BOX
colors: FL_BLACK FL_BLUE
alignment: FL_ALIGN_CENTER
style: FL_NORMAL_STYLE
size: FL_DEFAULT_SIZE
lcol: FL_BLACK
label:
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name:
callback:
argument:
--------------------
class: FL_XYPLOT
type: NORMAL_XYPLOT
box: 20 20 280 100
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_BLUE
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: Received Signal (Time-Domain, dB)
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: channel_t_re
callback:
argument:
--------------------
class: FL_XYPLOT
type: POINTS_XYPLOT
box: 600 230 160 190
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_GREEN
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: PBCH Scatter Plot
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: scatter_plot
callback:
argument:
--------------------
class: FL_XYPLOT
type: IMPULSE_XYPLOT
box: 20 140 570 90
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_RED
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: Frequency Domain Channel Estimate
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: channel_f
callback:
argument:
--------------------
class: FL_XYPLOT
type: NORMAL_XYPLOT
box: 310 20 280 100
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_BLUE
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: Time-Domain Channel Estimate
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: channel_t_im
callback:
argument:
--------------------
class: FL_XYPLOT
type: POINTS_XYPLOT
box: 20 250 570 130
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_GREEN
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: PBCH Decoder Input
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: decoder_input
callback:
argument:
--------------------
class: FL_XYPLOT
type: POINTS_XYPLOT
box: 600 440 160 190
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_YELLOW
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: PDSCH/PUSCH Scatter Plot
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: scatter_plot2
callback:
argument:
--------------------
class: FL_XYPLOT
type: POINTS_XYPLOT
box: 600 20 160 190
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_CYAN
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: PDCCH Scatter Plot
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: scatter_plot1
callback:
argument:
--------------------
class: FL_BUTTON
type: PUSH_BUTTON
box: 620 660 130 40
boxtype: FL_UP_BOX
colors: FL_COL1 FL_COL1
alignment: FL_ALIGN_CENTER
style: FL_NORMAL_STYLE
size: FL_DEFAULT_SIZE
lcol: FL_BLACK
label: IA receiver OFF
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: ia_receiver_button
callback: ia_receiver_on_off
argument: 0
--------------------
class: FL_XYPLOT
type: POINTS_XYPLOT
box: 20 400 570 140
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_YELLOW
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: PDSCH/PUSCH Decoder Input
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: demod_out
callback:
argument:
--------------------
class: FL_XYPLOT
type: NORMAL_XYPLOT
box: 20 560 570 140
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_WHITE
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: Throughput [kbits/s]
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: tput
callback:
argument:
==============================
create_the_forms
targets/RTAI/USER/lte_scope.h deleted 100644 → 0
View file @ 4c45400d
/* Header file generated by fdesign on Tue Nov 13 09:42:50 2012 */
#ifndef FD_lte_scope_h_
#define FD_lte_scope_h_
#include <forms.h>
/* Callbacks, globals and object handlers */
extern void ia_receiver_on_off( FL_OBJECT *, long );
/* Forms and Objects */
typedef struct {
FL_FORM * lte_scope;
void * vdata;
char * cdata;
long ldata;
FL_OBJECT * channel_t_re[4];
FL_OBJECT * channel_t_im[4];
/*
FL_OBJECT * scatter_plot;
FL_OBJECT * channel_f;
FL_OBJECT * decoder_input;
FL_OBJECT * scatter_plot2;
FL_OBJECT * scatter_plot1;
FL_OBJECT * ia_receiver_button;
FL_OBJECT * demod_out;
FL_OBJECT * tput;
*/
} FD_lte_scope;
extern FD_lte_scope * create_form_lte_scope( void );
#endif /* FD_lte_scope_h_ */
targets/RTAI/USER/make_for_usrp.sh deleted 100755 → 0
View file @ 4c45400d
#!/bin/bash
############### make nasmesh.ko ###############
sudo rmmod nasmesh
#cd ${OPENAIR2_DIR} && make nasmesh_netlink.ko
#cd ${OPENAIR2_DIR}/NAS/DRIVER/MESH/RB_TOOL/ && make
#make all
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
############## Ethernet config ####################
sudo ifconfig eth0 mtu 4000
sudo sysctl -w net.core.wmem_max=1048576
sudo sysctl -w net.core.rmem_max=50000000
############## rtai modules ###################
if test \! -c /dev/rtai_shm; then
sudo mknod -m 666 /dev/rtai_shm c 10 254
fi
for n in `seq 0 9`; do
f=/dev/rtf$n
if test \! -c $f; then
sudo mknod -m 666 $f c 150 $n
fi
done
sudo modprobe rtai_hal
sudo modprobe rtai_sched
sudo modprobe rtai_fifos
sudo modprobe rtai_sem
sudo modprobe rtai_mbx
sudo modprobe rtai_msg
############## make ###################
make lte-softmodem-usrp NAS=1 USRP=1 XFORMS=1 RTAI=1 HARD_RT=1 #DRIVER2013=1
#make lte-softmodem NAS=1 XFORMS=1 USRP=0 RTAI=1 DRIVER2013=1
echo DONE!
exit 0
targets/RTAI/USER/msg_helper.c deleted 100644 → 0
View file @ 4c45400d
#include <rtai_sem.h>
#include "msg_many.h"
/*
* Add a task task to ri->worker.
* Return the used index in ri->worker on success
* Return -TM_WORKER_FULL_ERROR if ri->worker full
* Return -TM_WORKER_ERROR else
*/
int tm_add_task(RT_TASK *task, run_info_t *ri)
{
if(ri->used >= NUM_THREADS)
return -TM_WORKER_FULL_ERROR;
rt_sem_wait(ri->update_sem);
(*ri->worker)[ri->used] = task;
ri->used++;
rt_sem_signal(ri->update_sem);
return ri->used - 1;
}
/*
* Remove the a hole in worker at index index by
* shift the next slots by one.
* This function assume that update_sem are locked.
* Return the new used counter.
*/
int _tm_clean_worker(RT_TASK *(*worker)[], int index, int used)
{
int i;
for(i = index; i < used; i++)
(*worker)[i] = (*worker)[i + 1];
return used - 1;
}
/*
* Remove a task from ri->worker a index task_index
* Return 0 on success
* Return -TM_WORKER_ERROR else
*/
int tm_del_task(int task_index, run_info_t *ri)
{
rt_sem_wait(ri->update_sem);
ri->used = _tm_clean_worker(ri->worker, task_index, ri->used);
rt_sem_signal(ri->update_sem);
return 0;
}
/*
* Return next index to use on ri->worker.
* It depends on the old_index and ri->used.
* Return -TM_WORKER_ERROR if ri->used == 0.
*/
inline int tm_get_next_task_index(int old_index, run_info_t *ri)
{
if(ri->used == 0)
return -TM_WORKER_ERROR;
return (old_index + 1) % ri->used;
}
targets/RTAI/USER/msg_many.c deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/msg_many.h deleted 100644 → 0
View file @ 4c45400d
#ifndef __MSG_MANY_H__
#define __MSG_MANY_H__
#include <stdint.h>
#define PERIOD 500000 /* in nano seconds */
#define THRESHOLD 1000000
#define THREAD_NAME_PREFIX "TK"
#define NUM_THREADS 10
#define TM_WORKER_FULL_ERROR 1
#define TM_WORKER_ERROR 2
typedef struct run_info {
RT_TASK *sender;
uint8_t *exit_condition;
long long period;
SEM *update_sem; /* protect the task array */
int used; /* counter of used slots in worker */
RT_TASK *(*worker)[]; /* declare worker as pointer to array of pointer to RT_TASK */
} run_info_t;
typedef struct thread_info {
run_info_t *ri;
uint8_t thread_num;
} thread_info_t;
int tm_add_task(RT_TASK *task, run_info_t *ri);
int tm_del_task(int task_index, run_info_t *ri);
inline int tm_get_next_task_index(int old_index, run_info_t *ri);
#endif
targets/RTAI/USER/rt_wrapper.c deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/rt_wrapper.h deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/sched_dlsch.c deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/sched_rx_pdsch.c deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/sched_ulsch.c deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/sleeptest.c deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/stats.c deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/stats.fd deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/stats.h deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/synctest.c deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/ue1rflo.lime deleted 100644 → 0
View file @ 4c45400d
8254752 8254752 8254752 8254752
targets/RTAI/USER/ue1rxg.lime deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/ue1txg.lime deleted 100644 → 0
View file @ 4c45400d
# For the TX, we need to set the tx gain values such that the transmitted power on all antennas is the same
# don't put any blank lines in this file
# tx gain (dB)
25 25 25 25
# total tx power (dBm)
5
targets/RTAI/USER/ue2rflo.lime deleted 100644 → 0
View file @ 4c45400d
8254871 8255752 8257340 8257340
targets/RTAI/USER/ue2rxg.lime deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/ue2txg.lime deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
targets/RTAI/USER/zeptorflo.lime deleted 100644 → 0
View file @ 4c45400d
8255000 8255000 8255000 8255000
targets/RTAI/USER/zeptorxg.lime deleted 100644 → 0
View file @ 4c45400d
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment