removing warnings (150 remaining)

openair1/SCHED/IF_Module_L1_primitives_nb_iot.c

@@ -11,7 +11,7 @@
 #include "PHY/INIT/defs_nb_iot.h"
 
 
-void handle_nfapi_dlsch_pdu_NB(PHY_VARS_eNB_NB_IoT *eNB,
+void handle_nfapi_dlsch_pdu_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,
 						  		   eNB_rxtx_proc_t *proc,
 		       	   	   	           nfapi_dl_config_request_pdu_t *dl_config_pdu,
 						   		   uint8_t *sdu)
@@ -152,7 +152,7 @@ void handle_nfapi_dlsch_pdu_NB(PHY_VARS_eNB_NB_IoT *eNB,
   //I don't know which kind of data is
   else
   {
-	  LOG_E(PHY, "handle_nfapi_dlsch_pdu_NB: Unknown type of data (rnti type %d, rnti %d)\n", rel13->rnti_type, rel13->rnti);
+	  LOG_E(PHY, "handle_nfapi_dlsch_pdu_NB_IoT: Unknown type of data (rnti type %d, rnti %d)\n", rel13->rnti_type, rel13->rnti);
   }
 
 }
@@ -259,7 +259,7 @@ void schedule_response(Sched_Rsp_t *Sched_INFO)
     		 * 	result active from the loop before calling the ndlsch_procedure
     		 */
 
-    		handle_nfapi_dlsch_pdu_NB(eNB, proc,dl_config_pdu,Sched_INFO->sdu[i]);
+    		handle_nfapi_dlsch_pdu_NB_IoT(eNB, proc,dl_config_pdu,Sched_INFO->sdu[i]);
 
     		break;
     	default:

openair1/SCHED/IF_Module_L1_primitives_nb_iot.h

@@ -14,7 +14,7 @@ void schedule_response(Sched_Rsp_t *Sched_INFO);
  * */
 void PHY_config_req(PHY_Config_t* config_INFO);
 
-void handle_nfapi_dlsch_pdu_NB(PHY_VARS_eNB_NB_IoT *eNB,
+void handle_nfapi_dlsch_pdu_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,
 						  	   	   eNB_rxtx_proc_t *proc,
 		       	   	   	   	       nfapi_dl_config_request_pdu_t *dl_config_pdu,
 						   	       uint8_t *sdu);

openair1/SCHED/phy_procedures_lte_eNb_nb_iot.c

@@ -939,12 +939,10 @@ void phy_procedures_eNB_TX_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,
 {
   int frame = proc->frame_tx;
   int subframe = proc->subframe_tx;
-  uint32_t i,aa;
+  uint32_t aa;
   DCI_PDU_NB *dci_pdu = eNB->DCI_pdu;
   NB_IoT_DL_FRAME_PARMS *fp = &eNB->frame_parms_NB_IoT;
   int8_t UE_id = 0;
-  uint8_t ul_subframe;
-  uint32_t ul_frame;
   int **txdataF = eNB->common_vars.txdataF[0];
   uint32_t sib1_startFrame = -1;
   NB_IoT_eNB_NPDCCH_t*npdcch;
@@ -990,8 +988,8 @@ void phy_procedures_eNB_TX_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,
                              fp,
 						                 eNB->npbch->pdu,
                              frame%64,
-                         fp->NB_IoT_RB_ID
-                         );
+                             fp->NB_IoT_RB_ID);
+                        
           }
 
           //In the last frame in which the MIB-NB should be transmitted after we point to NULL since maybe we stop MIB trasnmission
@@ -1023,8 +1021,7 @@ void phy_procedures_eNB_TX_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,
       sib1_startFrame = is_SIB1_NB(frame,
     		  	  	  	  	  	       (long)eNB->ndlsch_SIB1->harq_process->repetition_number,
 								                   fp->Nid_cell,
-								  eNB->ndlsch_SIB1 //set the flags
-								  );
+								                   eNB->ndlsch_SIB1); //set the flags
 								                   
   	  if(sib1_startFrame != -1 && eNB->ndlsch_SIB1->harq_process->pdu != NULL)
   	  {
@@ -1086,9 +1083,9 @@ void phy_procedures_eNB_TX_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,
 
     		  eNB->ndlsch_SI->harq_process->status = DISABLED;
 	    	}
-	      }
-	    else //this frame not foresee the transmission of NSSS (subframe 9 is available)
-	    {
+
+	     } else {//this frame not foresee the transmission of NSSS (subframe 9 is available)
+	    
 	    	      if(eNB->ndlsch_SI != NULL &&  subframe!= 0 && subframe != 5)
 	    	      {
 	    		         npdsch_procedures(eNB,
@@ -1103,8 +1100,6 @@ void phy_procedures_eNB_TX_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,
 
 	}
 
-
-
       ///check for RAR transmission
       if(eNB->ndlsch_ra != NULL && eNB->ndlsch_ra->active == 1 && (eNB->ndlsch_SIB1->harq_process->status != ACTIVE || subframe != 4)) //condition on SIB1-NB
       {
@@ -1160,7 +1155,7 @@ void phy_procedures_eNB_TX_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,
        */
 
       //this should give only 1 result (since only 1 ndlsch procedure is activated at once) so we brak after the transmission
-      for (int UE_id = 0; UE_id < NUMBER_OF_UE_MAX_NB_IoT; UE_id++)
+      for (UE_id = 0; UE_id < NUMBER_OF_UE_MAX_NB_IoT; UE_id++)
       {
     	  if(eNB->ndlsch[(uint8_t)UE_id] != NULL && eNB->ndlsch[(uint8_t)UE_id]->active == 1 && (eNB->ndlsch_SIB1->harq_process->status != ACTIVE || subframe != 4)) //condition on sib1-NB
     	  {
@@ -1229,7 +1224,7 @@ void phy_procedures_eNB_TX_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,
        * */
 
 
-      for(int i = UE_id; i < NUMBER_OF_UE_MAX_NB_IoT; UE_id++)
+      for(UE_id = 0 ; UE_id < NUMBER_OF_UE_MAX_NB_IoT; UE_id++)
       {
     	  if(eNB->npdcch[(uint8_t)UE_id] != NULL && eNB->npdcch[(uint8_t)UE_id]->rnti == dci_pdu->dci_alloc->rnti && (eNB->ndlsch_SIB1->harq_process->status != ACTIVE || subframe != 4))
     	  {
@@ -1238,8 +1233,7 @@ void phy_procedures_eNB_TX_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,
       	  	    if( subframe!= 0 && subframe != 5 && subframe != 9)
       	  	     {
 
-      	  	    	generate_dci_top_NB_IoT(
-    		      		  	  	  eNB->npdcch[(uint8_t)UE_id],
+      	  	    	generate_dci_top_NB_IoT(eNB->npdcch[(uint8_t)UE_id],
     		      		  	  	                dci_pdu->Num_dci,
     		  					                      dci_pdu->dci_alloc,
     		  					                      AMP,
@@ -1256,8 +1250,7 @@ void phy_procedures_eNB_TX_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,
       	     {
       	     if( subframe!= 0 && subframe != 5)
       	      {
-   	  	    	generate_dci_top_NB_IoT(
- 		      		  	  	  eNB->npdcch[(uint8_t)UE_id],
+   	  	    	  generate_dci_top_NB_IoT(eNB->npdcch[(uint8_t)UE_id],
  		      		  	  	                  dci_pdu->Num_dci,
  		  					                        dci_pdu->dci_alloc,
  		  					                        AMP,
@@ -1265,6 +1258,7 @@ void phy_procedures_eNB_TX_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,
  		  					                        eNB->common_vars.txdataF[0],
  		  					                        subframe,
  		  					                        dci_pdu->npdcch_start_symbol); //this parameter depends by eutraControlRegionSize (see TS36.213 16.6.1)
+   	  	    	  
                 eNB->npdcch[(uint8_t)UE_id]->repetition_idx++; //can do also inside also the management
 
  		  	  	  break;