add new build_oai.bash

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@6743 818b1a75-f10b-46b9-bf7c-635c3b92a50f

cmake_targets/CMakeLists.txt

@@ -66,7 +66,6 @@ if(SUBVERSION_FOUND)
   Subversion_WC_INFO(${OPENAIR_DIR} openair)
   set (FIRMWARE_VERSION "${openair_WC_REVISION} - ${openair_WC_LAST_CHANGED_DATE}")
   Subversion_WC_LOG(${OPENAIR_DIR} Project)
-  message("Last changed log is ${Project_LAST_CHANGED_LOG}")
 else()
   set (FIRMWARE_VERSION "No svn information")
 endif()
@@ -1310,7 +1309,7 @@ list(APPEND nasmesh_src device.c common.c ioctl.c classifier.c tool.c mesh.c)
 set(module_cc_opt "${module_cc_opt}")
 make_driver(nasmesh  ${OPENAIR2_DIR}/NAS/DRIVER/MESH ${nasmesh_src})
   
-# Variation of the same driver (logic????)
+# ???
 ####################
 list(APPEND oai_nw_drv_src device.c common.c ioctl.c classifier.c tool.c)
 if(OAI_NW_DRIVER_USE_NETLINK)
@@ -1318,6 +1317,14 @@ if(OAI_NW_DRIVER_USE_NETLINK)
 endif()
 make_driver(oai_nw_drv ${OPENAIR2_DIR}/NAS/DRIVER/LITE ${oai_nw_drv_src})
 
+# Exmimo board drivers
+#########################
+list(APPEND openair_rf_src module_main.c irq.c fileops.c exmimo_fw.c)
+make_driver(openair_rf ${OPENAIR_TARGETS}/ARCH/EXMIMO/DRIVER/eurecom ${openair_rf_src})
+
+add_executable(updatefw
+  ${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw.c
+)
 
 # add the install targets
 #install (TARGETS Tutorial DESTINATION bin)

cmake_targets/build_oai.bash

+#!/bin/bash
+################################################################################
+#   OpenAirInterface
+#   Copyright(c) 1999 - 2014 Eurecom
+#
+#    OpenAirInterface is free software: you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License as published by
+#    the Free Software Foundation, either version 3 of the License, or
+#    (at your option) anylater version.
+#
+#
+#    OpenAirInterface is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+#
+#    You should have received a copy of the GNU General Public License
+#    along with OpenAirInterface.The full GNU General Public License is
+#    included in this distribution in the file called "COPYING". If not,
+#    see <http://www.gnu.org/licenses/>.
+#
+#  Contact Information
+#  OpenAirInterface Admin: openair_admin@eurecom.fr
+#  OpenAirInterface Tech : openair_tech@eurecom.fr
+#  OpenAirInterface Dev  : openair4g-devel@eurecom.fr
+#
+#  Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+#
+################################################################################
+# file build_oai.bash
+# brief OAI automated build tool that can be used to install, compile, run OAI.
+# author  Navid Nikaein, Lionel GAUTHIER, Laurent Thomas
+
+
+################################
+# include helper functions
+################################
+THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
+source $THIS_SCRIPT_PATH/build_helper.bash
+
+#EMULATION_DEV_INTERFACE="eth0"
+#EMULATION_MULTICAST_GROUP=1
+#EMULATION_DEV_ADDRESS=`ifconfig $EMULATION_DEV_INTERFACE | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'`
+
+TARGET="ALL"
+XFORMS="False"
+VCD_TIMING="False"
+REL="Rel10"
+HW="EXMIMO"
+
+until [ -z "$1" ]
+  do
+  case "$1" in
+       -c | --clean)
+            CLEAN=1
+            echo "Will re-compile ALL"
+            shift;
+            ;;
+       --clean-iptables)
+            CLEAN_IPTABLES=1;
+            shift;
+            ;;
+       -C | --config-file)
+            CONFIG_FILE=$2
+            # may be relative path 
+            if [ -f $(dirname $(readlink -f $0))/$CONFIG_FILE ]; then
+                CONFIG_FILE=$(dirname $(readlink -f $0))/$CONFIG_FILE
+                echo "setting config file to: $CONFIG_FILE"
+                CONFIG_FILE_ACCESS_OK=1
+            else
+                # may be absolute path 
+                if [ -f $CONFIG_FILE ]; then
+                    echo "setting config file to: $CONFIG_FILE"
+                    CONFIG_FILE_ACCESS_OK=1
+                else
+                    echo "config file not found"
+                    exit 1
+                fi
+            fi
+            shift 2;
+            ;;
+       -D | --disable-check-installed-software)
+            DISABLE_CHECK_INSTALLED_SOFTWARE=1
+            echo "disable check installed software"
+            shift;
+            ;;
+       -g | --run-with-gdb)
+            GDB=1
+            echo "Running with gdb"
+            shift;
+            ;;
+       -K | --itti-dump-file)
+            ITTI_ANALYZER=1
+            ITTI_DUMP_FILE=$2
+            echo "setting ITTI dump file to: $ITTI_DUMP_FILE"
+            EXE_ARGUMENTS="$EXE_ARGUMENTS -K $ITTI_DUMP_FILE"
+            shift 2;
+            ;;
+       -l | --build-target) 
+            TARGET=$2
+            echo "setting top-level build target to: $2"
+            shift 2;
+            ;;
+       -h | --help)
+            print_help
+            exit 1
+            ;;
+       -r | --3gpp-release)
+            REL=$2 
+            echo "setting release to: $REL"
+            shift 2 ;
+            ;;
+       -s | --check)
+            OAI_TEST=1
+            echo "setting sanity check to: $OAI_TEST"
+            shift;
+            ;;
+       -V | --vcd)
+            echo "setting gtk-wave output"
+            VCD_TIMING=1
+            EXE_ARGUMENTS="$EXE_ARGUMENTS -V"
+            shift ;
+            ;;
+       -w | --hardware)
+            HW="$2" #"${i#*=}"
+            echo "setting hardware to: $HW"
+            shift 2 ;
+            ;;
+       -x | --xforms)
+            XFORMS=1
+            EXE_ARGUMENTS="$EXE_ARGUMENTS -d"
+            echo "setting xforms to: $XFORMS"
+            shift;
+            ;;
+       *)   
+            echo "Unknown option $1"
+            break ;
+            ;;
+   esac
+done
+
+################################
+# cleanup first 
+################################
+echo_info "1. Cleaning ..."
+
+if [ "$CLEAN_IPTABLES" == "1" ] ; then
+    echo_info "Flushing iptables..."
+    $SUDO modprobe ip_tables
+    $SUDO modprobe x_tables
+    $SUDO iptables -P INPUT ACCEPT
+    $SUDO iptables -F INPUT
+    $SUDO iptables -P OUTPUT ACCEPT
+    $SUDO iptables -F OUTPUT
+    $SUDO iptables -P FORWARD ACCEPT
+    $SUDO iptables -F FORWARD
+    $SUDO iptables -t nat -F
+    $SUDO iptables -t mangle -F
+    $SUDO iptables -t filter -F
+    $SUDO iptables -t raw -F
+    echo_info "Flushed iptables"
+fi
+
+
+############################################
+# setting and printing OAI envs, we should check here
+############################################
+    
+echo_info "2. Setting the OAI PATHS ..."
+
+set_openair_env 
+cecho "OPENAIR_HOME    = $OPENAIR_HOME" $green
+cecho "OPENAIR1_DIR    = $OPENAIR1_DIR" $green
+cecho "OPENAIR2_DIR    = $OPENAIR2_DIR" $green
+cecho "OPENAIR3_DIR    = $OPENAIR3_DIR" $green
+cecho "OPENAIRCN_DIR   = $OPENAIRCN_DIR" $green
+cecho "OPENAIR_TARGETS = $OPENAIR_TARGETS" $green
+
+dbin=$OPENAIR_HOME/cmake_targets/bin
+dlog=$OPENAIR_HOME/cmake_targets/log
+
+if [ "$CLEAN" == "1" ] ; then
+    rm -rf $OPENAIR_DIR/cmake_targets/*/build $dbin $dlog
+    echo_info "deleted all compilation results"
+fi
+mkdir -p $dbin $dlog
+
+if [ "$DISABLE_CHECK_INSTALLED_SOFTWARE" != "1" ] ; then
+   check_install_oai_software
+   make_certs
+   check_epc_s6a_certificate
+   check_hss_s6a_certificate
+   if [ "$HW" == "USRP" ] ; then
+     check_install_usrp_uhd_driver
+   fi
+fi
+
+echo_info "3. building the compilation directives ..."
+
+if [ "$TARGET" = "ALL" -o "$TARGET" = "SOFTMODEM" ] ; then
+   DIR=$OPENAIR_HOME/cmake_targets
+
+   # LTE softmodem compilation
+   mkdir -p $DIR/lte_build_oai
+   cmake_file=$DIR/lte_build_oai/CMakeLists.txt
+   echo "cmake_minimum_required(VERSION 2.8)" > $cmake_file
+   echo "set(XFORMS $XFORMS )" >>  $cmake_file
+   echo "set(RRC_ASN1_VERSION \"${REL}\")" >>  $cmake_file
+   echo "set(ENABLE_VCD_FIFO $VCD_TIMING )" >>  $cmake_file
+   echo "set(RF_BOARD \"${HW}\")" >>  $cmake_file
+   echo 'set(PACKAGE_NAME "lte-softmodem")' >>  $cmake_file
+   echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
+
+   if compilations lte_build_oai lte-softmodem lte-softmodem $dbin/lte-softmodem.$REL \
+        > $dlog/lte-softmodem.$REL.txt 2>&1 ; then
+      echo_success "lte-softmodem compiled"
+   else
+      echo_error "lte-softmodem compilation failed"
+   fi
+
+   # nasmesh driver compilation
+   if compilations lte_build_oai nasmesh CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesk.ko \
+        > $dlog/nasmesh.txt 2>&1 ; then
+      echo_success "nasmesh driver compiled"
+   else
+      echo_error "nasmesh driver compilation failed"
+   fi
+   
+   # lte unitary simulators compilation
+   simlist="dlsim ulsim pucchsim prachsim pdcchsim pbchsim mbmssim"
+   log=$dlog/lte-simulators.log
+   cd $OPENAIR_DIR/cmake_targets/lte-simulators
+   mkdir -p build
+   cd build
+   rm -f *sim
+   cmake ..  > $log 2>&1
+   make -j4 $simlist > $log 2>&1
+   for f in $simlist ; do
+       if [ -s $f ] ; then
+	   echo_success "$f compiled"
+           cp $f $OPENAIR_DIR/cmake_targets/tests/bin 
+       else
+	   echo_error "$f compilation failed"
+       fi
+   done
+
+   # EXMIMO drivers & firmware loader
+   if [ "$HW" = "EXMIMO" ] ; then
+     if compilations lte_build_oai openair_rf CMakeFiles/openair_rf/openair_rf.ko $dbin/openair_rf.ko \
+        > $dlog/openair_rf.txt 2>&1 ; then
+       echo_success "EXMIMO driver compiled"
+     else
+        echo_error "EXMIMO driver compilation failed"
+     fi
+     if  compilations lte_build_oai updatefw updatefw $dbin/updatefw \
+       > $dlog/updatefw.txt 2>&1 ; then
+       echo_success "EXMIMO firmware loader compiled"
+     else
+        echo_error "EXMIMO firmware loader compilation failed"
+     fi
+   fi
+
+   # TBD: oasim compilation
+   cmake_file=$DIR/oaisim_build_oai/CMakeLists.txt
+   cp $DIR/oaisim_build_oai/CMakeLists.template $cmake_file
+   echo "set(XFORMS $XFORMS )" >>  $cmake_file
+   echo "set(RRC_ASN1_VERSION \"${REL}\")" >>  $cmake_file
+   echo "set(ENABLE_VCD_FIFO $VCD_TIMING )" >>  $cmake_file
+   echo "set(RF_BOARD \"${HW}\")" >>  $cmake_file
+   echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
+
+   if compilations oaisim_build_oai oaisim oaisim $dbin/oaisim.$REL \
+        > $dlog/oaisim.$REL.txt 2>&1 ; then
+      echo_success "oaisim compiled"
+   else
+      echo_error "oaisim compilation failed"
+   fi
+
+fi
+exit 0
+
+build_epc(){
+
+    epc_compiled=1
+
+    echo_info "Note: this scripts tested only on Ubuntu 14.04x64"
+
+######################################
+# CHECK MISC SOFTWARES AND LIBS      #
+######################################
+    if [ $DISABLE_CHECK_INSTALLED_SOFTWARE -eq 0 ]; then 
+        echo_info "4. Checking the the required softwares/packages for EPC..."
+
+        check_install_epc_software  
+        check_install_asn1c
+        if [ $OAI_CLEAN -eq 1 ]; then
+            check_install_freediamter
+        else 
+            if [ ! -d /usr/local/etc/freeDiameter ]; then
+                check_install_freediamter
+            fi
+        fi
+    else
+        echo_info "4. Not checking the required softwares/packages for EPC"
+    fi
+
+###########################################
+# configure and compile
+##########################################
+
+    echo_info "5. configure and compile epc"
+
+    output=$(compile_epc $OAI_CLEAN  >> $OPENAIR_TARGETS/bin/install_log.txt  2>&1 )
+    epc_compiled=$?
+    if [ $epc_compiled -ne 0 ]; then
+        echo_error "EPC compilation failed : check the installation log file bin/install_log.txt" 
+        exit 1
+    fi
+    check_for_epc_executable
+    echo_info "finished epc target: check the installation log file bin/install_log.txt" 
+
+    if [ $CONFIG_FILE_ACCESS_OK -eq 0 ]; then
+        echo_error "You have to provide a EPC config file"
+        exit 1
+    fi
+    
+    TEMP_FILE=`tempfile`
+    VARIABLES=" S6A_CONF\|\
+           HSS_HOSTNAME\|\
+           REALM"
+
+    VARIABLES=$(echo $VARIABLES | sed -e 's/\\r//g')
+    VARIABLES=$(echo $VARIABLES | tr -d ' ')
+    cat $CONFIG_FILE | grep -w "$VARIABLES"| tr -d " " | tr -d ";" > $TEMP_FILE
+    source $TEMP_FILE
+    rm -f $TEMP_FILE
+
+    if [ x"$REALM" == "x" ]; then
+        echo_error "Your config file do not contain a REALM for S6A configuration"
+        exit 1
+    fi
+    if [ x"$S6A_CONF" != "x./epc_s6a.conf" ]; then
+        echo_error "Your config file do not contain the good path for the S6A config file,"
+        echo_error "accordingly to what is done in this script, it should be set to epc_s6a.conf"
+        exit 1
+    fi
+
+    check_epc_s6a_certificate $REALM
+
+###########################################
+# install the binary in bin
+##########################################
+
+    echo_info "6. install the binary file"
+
+    if [ $epc_compiled -eq 0 ]; then 
+        echo_success "target epc built and installed in the bin directory"
+        echo "target epc built and installed in the bin directory"  >>  bin/${oai_build_date}
+        cp -f $CONFIG_FILE  $OPENAIR_TARGETS/bin
+        cp -f $OPENAIRCN_DIR/objs/UTILS/CONF/s6a.conf  $OPENAIR_TARGETS/bin/epc_s6a.conf
+    fi
+}
+
+build_hss(){
+    echo_info "Note: this script tested only for Ubuntu 12.04 x64 -> 14.04 x64"
+
+######################################
+# CHECK MISC SOFTWARES AND LIBS      #
+######################################
+    if [ $DISABLE_CHECK_INSTALLED_SOFTWARE -eq 0 ]; then 
+        echo_info "4. check the required packages for HSS"
+        check_install_hss_software
+        if [ $OAI_CLEAN -eq 1 ]; then
+            check_install_freediamter
+        else 
+            if [ ! -d /usr/local/etc/freeDiameter ]; then
+                check_install_freediamter
+            fi
+        fi
+    else
+        echo_info "4. Not checking the required packages for HSS"
+    fi
+    
+  
+######################################
+# compile HSS                        #
+######################################
+    echo_info "5. compile HSS"
+
+     # Bad behaviour of $OAI_CLEAN with ./.lock_oaibuild ...
+     compile_hss $CLEAN_HSS
+     hss_compiled=$?
+     check_for_hss_executable
+     echo_info "finished hss target" 
+ 
+######################################
+# Check certificates                 #
+######################################
+  
+    TEMP_FILE=`tempfile`
+    cat $OPENAIRCN_DIR/OPENAIRHSS/conf/hss_fd.conf | grep -w "Identity" | tr -d " " | tr -d ";" > $TEMP_FILE
+    cat $OPENAIRCN_DIR/OPENAIRHSS/conf/hss.conf    | grep -w "MYSQL_user" | tr -d " " | tr -d ";" >> $TEMP_FILE
+    cat $OPENAIRCN_DIR/OPENAIRHSS/conf/hss.conf    | grep -w "MYSQL_pass" | tr -d " " | tr -d ";" >> $TEMP_FILE
+    cat $OPENAIRCN_DIR/OPENAIRHSS/conf/hss.conf    | grep -w "MYSQL_db" | tr -d " " | tr -d ";" >> $TEMP_FILE
+    source $TEMP_FILE
+    rm -f  $TEMP_FILE
+
+    if [ x"$Identity" == "x" ]; then
+        echo_error "Your config file do not contain a host identity for S6A configuration"
+        exit 1
+    fi
+    HSS_REALM=$(echo $Identity | sed 's/.*\.//')
+    HSS_HOSTNAME=${Identity%.$HSS_REALM}
+    NEW_HOSTNAME=`hostname -s`
+    if [ "x$HSS_HOSTNAME" != "x$NEW_HOSTNAME" ]; then
+       echo_warning "Changing identity of HSS from <$HSS_HOSTNAME.$HSS_REALM> to <$NEW_HOSTNAME.$HSS_REALM>"
+       sed -ibak "s/$HSS_HOSTNAME/$NEW_HOSTNAME/"  $OPENAIRCN_DIR/OPENAIRHSS/conf/hss_fd.conf 
+    fi
+    check_hss_s6a_certificate $HSS_REALM
+    
+######################################
+# fill the HSS DB
+######################################
+     echo_info "6. create HSS database (for EURECOM SIM CARDS)"
+     hss_db_created=1
+     create_hss_database $OAI_DB_ADMIN_USER_NAME $OAI_DB_ADMIN_USER_PASSWORD $MYSQL_user $MYSQL_pass $MYSQL_db
+     if [ $? -eq 1 ]; then
+         echo_fatal "hss DB not created"
+     fi
+}
+
+
+ 
+
+echo_info "3. set the top-level build target"
+case "$BUILD_LTE" in
+    'ENB')
+         echo_success "build LTE eNB"
+         build_enb
+         ;;
+    'EPC')
+         echo_success "build EPC(MME and xGW)"
+         build_epc
+         ;;
+    'HSS')
+        echo_success "build HSS"
+        build_hss 
+        ;;
+    'NONE')
+        ;;
+    *)
+        ;;
+esac
+
+# Additional operation 
+
+############################################
+# Generate doxygen documentation
+############################################
+
+if [ $DOXYGEN = 1 ]; then 
+    echo_info "9. Generate doxygen documentation ..."
+    doxygen $OPENAIR_TARGETS/DOCS/Doxyfile
+    echo_info "9.1 use your navigator to open $OPENAIR_TARGETS/DOCS/html/index.html "
+else 
+    echo_info "9. Bypassing doxygen documentation ..."
+fi 
+
+
+############################################
+# testing
+############################################
+    
+if [ $OAI_TEST -eq 1 ]; then 
+    echo_info "10. Running OAI pre commit tests (pre-ci) ..."
+    python $OPENAIR_TARGETS/TEST/OAI/test01.py -l 
+else 
+    echo_info "10. Bypassing the Tests ..."
+fi 
+    
+############################################
+# run 
+############################################
+
+if [ $RUN -ne 0 ]; then 
+    echo_info "11. Running ..."
+    cd $OPENAIR_TARGETS/bin
+    case "$BUILD_LTE" in
+        'ENB')
+            if [ $TARGET == "SOFTMODEM" ]; then 
+                if [ $HW == "EXMIMO" ]; then 
+                    $SUDO chmod 777 $OPENAIR_TARGETS/RT/USER/init_exmimo2.sh
+                    $SUDO $OPENAIR_TARGETS/RT/USER/init_exmimo2.sh
+                fi
+                echo "############# running ltesoftmodem #############"
+                if [ $RUN_GDB -eq 0 ]; then 
+                    $SUDO $OPENAIR_TARGETS/bin/lte-softmodem  `echo $EXE_ARGUMENTS`
+                else
+                    $SUDO setenv MALLOC_CHECK_ 2
+                    $SUDO touch ~/.gdb_lte_softmodem
+                    $SUDO echo "file $OPENAIR_TARGETS/bin/lte-softmodem" > ~/.gdb_lte_softmodem
+                    $SUDO echo "set args $EXE_ARGUMENTS" >> ~/.gdb_lte_softmodem
+                    $SUDO echo "run" >> ~/.gdb_lte_softmodem
+                    $SUDO gdb -nh -x ~/.gdb_lte_softmodem 2>&1 
+                fi
+                
+            elif [ $TARGET == "OAISIM" ]; then
+            
+                if [ $ENB_S1 -eq 0 ]; then
+		    install_nasmesh
+                else
+                    # prepare NAS for UE
+                    if [ ! -f .ue.nvram ]; then
+                        echo_success "generate .ue_emm.nvram .ue.nvram"
+                        $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/ue_data --gen
+                    fi
+
+                    if [ ! -f .usim.nvram ]; then
+                        echo_success "generate .usim.nvram"
+                        $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/usim_data --gen
+                    fi
+                    $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/ue_data --print
+                    $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/usim_data --print
+
+                    insmod  $OPENAIR2_DIR/NETWORK_DRIVER/UE_IP/ue_ip.ko
+                    
+                fi
+                
+                if [ $RUN_GDB -eq 0 ]; then 
+                    $SUDO exec $OPENAIR_TARGETS/bin/oaisim  `echo $EXE_ARGUMENTS`
+                else
+                    $SUDO setenv MALLOC_CHECK_ 2
+                    $SUDO touch ~/.gdb_oaisim
+                    $SUDO echo "file $OPENAIR_TARGETS/bin/lte-oaisim" > ~/.gdb_oaisim
+                    $SUDO echo "set args $EXE_ARGUMENTS" >> ~/.gdb_oaisim
+                    $SUDO echo "run" >> ~/.gdb_oaisim
+                    $SUDO gdb -nh -x ~/.gdb_oaisim 2>&1 
+                fi
+            fi
+            ;;
+        
+        
+        'EPC')
+            echo "############# running EPC #############"
+            test_is_host_reachable $HSS_HOSTNAME.$REALM HSS
+            if [ $RUN_GDB -eq 0 ]; then
+                $SUDO $OPENAIR_TARGETS/bin/oai_epc  `echo $EXE_ARGUMENTS`
+            else
+                touch ~/.gdb_epc
+                chmod 777 ~/.gdb_epc
+                echo "file $OPENAIR_TARGETS/bin/oai_epc" > ~/.gdb_epc
+                echo "set args $EXE_ARGUMENTS" >> ~/.gdb_epc
+                echo "run" >> ~/.gdb_epc
+                $SUDO gdb -nh -x ~/.gdb_epc 2>&1 
+            fi
+            ;;
+        
+        
+        'HSS')
+            echo "############# running HSS #############"
+            cd $OPENAIRCN_DIR/OPENAIRHSS/objs
+            if [ $RUN_GDB -eq 0 ]; then
+                $SUDO exec ./openair-hss -c ./conf/hss.conf
+            else
+                touch ~/.gdb_hss
+                chmod 777 ~/.gdb_hss
+                echo "file ./openair-hss" > ~/.gdb_hss
+                echo "set args -c ./conf/hss.conf" >> ~/.gdb_hss
+                echo "run" >> ~/.gdb_hss
+                $SUDO gdb -nh -x ~/.gdb_hss 2>&1 
+            fi
+             ;;
+         
+         
+        'NONE')
+             ;;
+         
+         
+        *)
+             echo_error "Unknown option $BUILD_LTE: do not execute"
+             ;;
+    esac
+else
+    echo_info "11. No run requested, end of script"
+    exit 0
+fi
+
+

cmake_targets/lte_build_oai/CMakeLists.txt

+cmake_minimum_required(VERSION 2.8)
+set(XFORMS False )
+set(RRC_ASN1_VERSION "Rel10")
+set(ENABLE_VCD_FIFO False )
+set(RF_BOARD "EXMIMO")
+set(PACKAGE_NAME "lte-softmodem")
+include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)

cmake_targets/oaisim_build_oai/CMakeLists.template

+cmake_minimum_required(VERSION 2.8)
+
+set(ADDR_CONF False)
+set(ASSERT True)
+set(DEBUG_OMG False)
+set(DRIVER2013 True)
+set(ENABLE_FXP True)
+set(ENABLE_ITTI True)
+set(ENABLE_NAS_UE_LOGGING True)
+set(ENABLE_NEW_MULTICAST True)
+set(ENABLE_PDCP_NETLINK_FIFO False)
+set(ENABLE_PGM_TRANSPORT True)
+set(ENABLE_RAL False)
+set(ENABLE_SECURITY True)
+set(ENABLE_USE_CPU_EXECUTION_TIME True)
+set(ENABLE_USE_MME True)
+set(HARD_RT False)
+set(JUMBO_FRAME False)
+set(LARGE_SCALE False)
+set(LINK_PDCP_TO_GTPV1U True)
+set(LINUX_LIST False)
+set(LINUX True)
+set(LOCALIZATION False)
+set(LOG_NO_THREAD True)
+set(LOWLATENCY True)
+set(MAC_CONTEXT 1)
+set(MAX_NUM_CCs 1)
+set(MIH_C_MEDIEVAL_EXTENSIONS True)
+set(MSG_PRINT False)
+set(MU_RECEIVER False)
+set(NAS_ADDRESS_FIX true)
+set(NAS_NETLINK False)
+set(NAS_UE False)
+set(NEW_FFT True)
+set(NO_RRM True)
+set(OAI_EMU True)
+set(OAISIM True)
+set(OAI_NW_DRIVER_TYPE_ETHERNET False)
+set(OPENAIR1 True)
+set(OPENAIR2 True)
+set(OPENAIR_EMU False)
+set(OPENAIR_LTE True)
+set(PACKAGE_NAME "oaisim")
+set(PBS_SIM False)
+set(PC_DSP True)
+set(PC_TARGET True)
+set(PDCP_MSG_PRINT False)
+set(PERFECT_CE False)
+set(PHY_ABSTRACTION False)
+set(PHY_ABSTRACTION False)
+set(PHY_EMUL False)
+set(PHYSIM True)
+set(PUCCH True)
+set(RANDOM_BF False)
+set(RF_BOARD "EXMIMO")
+set(RLC_STOP_ON_LOST_PDU False)
+set(RRC_ASN1_VERSION False)
+set(RRC_ASN1_VERSION "Rel10")
+set(RRC_MSG_PRINT False)
+set(RTAI False)
+set(SECU False)
+set(SMBV False)
+set(SPECTRA False)
+set(TEST_OMG False)
+set(UE_BUILD False)
+set(USE_3GPP_ADDR_AS_LINK_ADDR False)
+set(USE_MME False)
+set(USER_MODE True)
+set(XER_PRINT False)
+

cmake_targets/oaisim_build_oai/CMakeLists.txt

+cmake_minimum_required(VERSION 2.8)
+
+set(ADDR_CONF False)
+set(ASSERT True)
+set(DEBUG_OMG False)
+set(DRIVER2013 True)
+set(ENABLE_FXP True)
+set(ENABLE_ITTI True)
+set(ENABLE_NAS_UE_LOGGING True)
+set(ENABLE_NEW_MULTICAST True)
+set(ENABLE_PDCP_NETLINK_FIFO False)
+set(ENABLE_PGM_TRANSPORT True)
+set(ENABLE_RAL False)
+set(ENABLE_SECURITY True)
+set(ENABLE_USE_CPU_EXECUTION_TIME True)
+set(ENABLE_USE_MME True)
+set(HARD_RT False)
+set(JUMBO_FRAME False)
+set(LARGE_SCALE False)
+set(LINK_PDCP_TO_GTPV1U True)
+set(LINUX_LIST False)
+set(LINUX True)
+set(LOCALIZATION False)
+set(LOG_NO_THREAD True)
+set(LOWLATENCY True)
+set(MAC_CONTEXT 1)
+set(MAX_NUM_CCs 1)
+set(MIH_C_MEDIEVAL_EXTENSIONS True)
+set(MSG_PRINT False)
+set(MU_RECEIVER False)
+set(NAS_ADDRESS_FIX true)
+set(NAS_NETLINK False)
+set(NAS_UE False)
+set(NEW_FFT True)
+set(NO_RRM True)
+set(OAI_EMU True)
+set(OAISIM True)
+set(OAI_NW_DRIVER_TYPE_ETHERNET False)
+set(OPENAIR1 True)
+set(OPENAIR2 True)
+set(OPENAIR_EMU False)
+set(OPENAIR_LTE True)
+set(PACKAGE_NAME "oaisim")
+set(PBS_SIM False)
+set(PC_DSP True)
+set(PC_TARGET True)
+set(PDCP_MSG_PRINT False)
+set(PERFECT_CE False)
+set(PHY_ABSTRACTION False)
+set(PHY_ABSTRACTION False)
+set(PHY_EMUL False)
+set(PHYSIM True)
+set(PUCCH True)
+set(RANDOM_BF False)
+set(RF_BOARD "EXMIMO")
+set(RLC_STOP_ON_LOST_PDU False)
+set(RRC_ASN1_VERSION False)
+set(RRC_ASN1_VERSION "Rel10")
+set(RRC_MSG_PRINT False)
+set(RTAI False)
+set(SECU False)
+set(SMBV False)
+set(SPECTRA False)
+set(TEST_OMG False)
+set(UE_BUILD False)
+set(USE_3GPP_ADDR_AS_LINK_ADDR False)
+set(USE_MME False)
+set(USER_MODE True)
+set(XER_PRINT False)
+
+set(XFORMS False )
+set(RRC_ASN1_VERSION "Rel10")
+set(ENABLE_VCD_FIFO False )
+set(RF_BOARD "EXMIMO")
+include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)