bugfix in nr_dlsch_decoding.c

openair1/PHY/NR_UE_TRANSPORT/nr_dlsch_decoding.c

@@ -663,9 +663,8 @@ uint32_t nr_dlsch_decoding(PHY_VARS_NR_UE *phy_vars_ue,
     harq_process->harq_ack.harq_id = harq_pid;
     harq_process->harq_ack.send_harq_status = 1;
     harq_process->errors[harq_process->round]++;
-    harq_process->round++; // [hna] uncomment this line when HARQ is implemented
 
-    //    printf("Rate: [UE %d] DLSCH: Setting NACK for subframe %d (pid %d, round %d)\n",phy_vars_ue->Mod_id,subframe,harq_pid,harq_process->round);
+    //    printf("Rate: [UE %d] DLSCH: Setting NACK for slot %d (pid %d, round %d)\n",phy_vars_ue->Mod_id,nr_tti_rx,harq_pid,harq_process->round);
     if (harq_process->round >= dlsch->Mlimit) {
       harq_process->status = SCH_IDLE;
       harq_process->round  = 0;

openair1/SCHED_NR_UE/fapi_nr_ue_l1.c

@@ -117,6 +117,7 @@ int8_t nr_ue_scheduled_response(nr_scheduled_response_t *scheduled_response){
             dlsch0_harq->harq_ack.rx_status = downlink_harq_process(dlsch0_harq, dlsch0->current_harq_pid, dlsch_config_pdu->ndi, dlsch0->rnti_type);
             dlsch0_harq->harq_ack.vDAI_DL = dlsch_config_pdu->dai;
             LOG_D(MAC, ">>>> \tdlsch0->g_pucch = %d\tdlsch0_harq.mcs = %d\n", dlsch0->g_pucch, dlsch0_harq->mcs);
+		
           }
         }
       }

openair1/SCHED_NR_UE/phy_procedures_nr_ue.c

@@ -3047,7 +3047,7 @@ void nr_ue_pdsch_procedures(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, int eNB
     uint16_t s0             = dlsch0->harq_processes[harq_pid]->start_symbol;
     uint16_t s1             = dlsch0->harq_processes[harq_pid]->nb_symbols;
 
-    LOG_D(PHY,"[UE %d] PDSCH type %d active in nr_tti_rx %d, harq_pid %d, rb_start %d, nb_rb %d, symbol_start %d, nb_symbols %d, DMRS mask %x\n",ue->Mod_id,pdsch,nr_tti_rx,harq_pid,pdsch_start_rb,pdsch_nb_rb,s0,s1,dlsch0->harq_processes[harq_pid]->dlDmrsSymbPos);
+    LOG_D(PHY,"[UE %d] PDSCH type %d active in nr_tti_rx %d, harq_pid %d (%d), rb_start %d, nb_rb %d, symbol_start %d, nb_symbols %d, DMRS mask %x\n",ue->Mod_id,pdsch,nr_tti_rx,harq_pid,dlsch0->harq_processes[harq_pid]->status,pdsch_start_rb,pdsch_nb_rb,s0,s1,dlsch0->harq_processes[harq_pid]->dlDmrsSymbPos);
 
     // do channel estimation for first DMRS only
     for (m = s0; m < 3; m++) {

openair1/SIMULATION/NR_PHY/dlsim.c

@@ -722,6 +722,8 @@ int main(int argc, char **argv)
     //n_alamouti = 0;
     errors_scrambling=0;
     n_false_positive = 0;
+    if (n_trials== 1) num_rounds = 1;
+
     for (trial = 0; trial < n_trials; trial++) {
 
       errors_bit = 0;
@@ -756,6 +758,7 @@ int main(int argc, char **argv)
 
         UE_list->UE_sched_ctrl[0].harq_processes[harq_pid].ndi = !(trial&1);
 
+
         UE_list->UE_sched_ctrl[0].harq_processes[harq_pid].round = round;   
         UE_list->UE_sched_ctrl[0].current_harq_pid = harq_pid;
         gNB->dlsch[0][0]->harq_processes[harq_pid]->round = round;
@@ -1014,6 +1017,7 @@ int main(int argc, char **argv)
 	LOG_M("rxsig1.m","rxs1", UE->common_vars.rxdata[1], frame_length_complex_samples, 1, 1);
       LOG_M("chestF0.m","chF0",UE->pdsch_vars[0][0]->dl_ch_estimates_ext,N_RB_DL*12*14,1,1);
       write_output("rxF_comp.m","rxFc",&UE->pdsch_vars[0][0]->rxdataF_comp0[0][0],N_RB_DL*12*14,1,1);
+      LOG_M("rxF_llr.m","rxFllr",UE->pdsch_vars[UE->current_thread_id[UE_proc.nr_tti_rx]][0]->llr[0],available_bits,1,0);
       break;
     }