Skip to content

O
OpenXG-RAN
Commit a19a27ff authored by Cedric Roux's avatar Cedric Roux
Browse files
Options

test setup v2: add RRU/RRC tests 

- README.txt modified
- tests added in test_case_list.xml
  (only for test setup v2)
- python code modified
- configuration files added
parent 19bd4d8c
Hide whitespace changes
Inline Side-by-side
Showing with 1358 additions and 21 deletions
cmake_targets/autotests/README.txt
View file @ a19a27ff
...@@ -239,6 +239,20 @@ Obj.# Case# Test# Description ...@@ -239,6 +239,20 @@ Obj.# Case# Test# Description
01 75 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX 01 75 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 75 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX 01 75 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 76 lte-softmodem + RRU (NGFI IF4P5, UDP) tests with B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 76 00 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
01 76 01 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
01 76 02 Band 7 FDD 20MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
01 76 03 Band 7 FDD 5MHz DL Throughput (UDP) for 300 sec for 1TX/1RX
01 76 04 Band 7 FDD 10MHz DL Throughput (UDP) for 300 sec for 1TX/1RX
01 76 05 Band 7 FDD 20MHz DL Throughput (UDP) for 300 sec for 1TX/1RX
01 76 06 Band 7 FDD 5MHz UL Throughput (TCP) for 300 sec for 1TX/1RX
01 76 07 Band 7 FDD 10MHz UL Throughput (TCP) for 300 sec for 1TX/1RX
01 76 08 Band 7 FDD 20MHz UL Throughput (TCP) for 300 sec for 1TX/1RX
01 76 09 Band 7 FDD 5MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
01 76 10 Band 7 FDD 10MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
01 76 11 Band 7 FDD 20MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
01 80 lte-softmodem + RRU (NGFI) tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX 01 80 lte-softmodem + RRU (NGFI) tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 80 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX 01 80 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 80 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX 01 80 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
......
cmake_targets/autotests/test_case_list.xml
View file @ a19a27ff
...@@ -8664,6 +8664,19 @@ c ...@@ -8664,6 +8664,19 @@ c
<nruns>10</nruns> <nruns>10</nruns>
</testCase> </testCase>
<testCase id="017600"></testCase>
<testCase id="017601"></testCase>
<testCase id="017602"></testCase>
<testCase id="017603"></testCase>
<testCase id="017604"></testCase>
<testCase id="017605"></testCase>
<testCase id="017606"></testCase>
<testCase id="017607"></testCase>
<testCase id="017608"></testCase>
<testCase id="017609"></testCase>
<testCase id="017610"></testCase>
<testCase id="017611"></testCase>
<testCase id="018600"></testCase> <testCase id="018600"></testCase>
<testCase id="018601"></testCase> <testCase id="018601"></testCase>
<testCase id="018602"></testCase> <testCase id="018602"></testCase>
......
cmake_targets/autotests/v2/alu_test.py
View file @ a19a27ff
...@@ -9,18 +9,24 @@ class alu_test: ...@@ -9,18 +9,24 @@ class alu_test:
openair, openair,
user, password, user, password,
log_subdir, log_subdir,
env): env,
self.epc_machine = epc enb_rru = "",
self.enb_machine = enb enb_rcc = ""):
self.ue_machine = ue self.epc_machine = epc
self.openair_dir = openair self.enb_machine = enb
self.oai_user = user self.ue_machine = ue
self.oai_password = password self.openair_dir = openair
self.env = env self.oai_user = user
self.oai_password = password
self.task_hss = None self.env = env
self.task_enb = None self.enb_rru_machine = enb_rru
self.task_ue = None self.enb_rcc_machine = enb_rcc
self.task_hss = None
self.task_enb = None
self.task_ue = None
self.task_rru_enb = None
self.task_rcc_enb = None
self.logdir = openair + '/cmake_targets/autotests/log/' + log_subdir self.logdir = openair + '/cmake_targets/autotests/log/' + log_subdir
quickshell('mkdir -p ' + self.logdir) quickshell('mkdir -p ' + self.logdir)
...@@ -40,6 +46,10 @@ class alu_test: ...@@ -40,6 +46,10 @@ class alu_test:
self.task_enb.kill() self.task_enb.kill()
if self.task_ue != None and self.task_ue.alive(): if self.task_ue != None and self.task_ue.alive():
self.task_ue.kill() self.task_ue.kill()
if self.task_rru_enb != None and self.task_rru_enb.alive():
self.task_rru_enb.kill()
if self.task_rcc_enb != None and self.task_rcc_enb.alive():
self.task_rcc_enb.kill()
########################################################################## ##########################################################################
# start_epc # start_epc
...@@ -101,7 +111,7 @@ class alu_test: ...@@ -101,7 +111,7 @@ class alu_test:
########################################################################## ##########################################################################
# compile_enb # compile_enb
########################################################################## ##########################################################################
def compile_enb(self, build_arguments): def compile_enb(self, build_arguments, log_suffix=""):
log("INFO: ALU test: compile softmodem on " + self.enb_machine) log("INFO: ALU test: compile softmodem on " + self.enb_machine)
envcomp = list(self.env) envcomp = list(self.env)
envcomp.append('BUILD_ARGUMENTS="' + build_arguments + '"') envcomp.append('BUILD_ARGUMENTS="' + build_arguments + '"')
...@@ -120,7 +130,8 @@ class alu_test: ...@@ -120,7 +130,8 @@ class alu_test:
self.oai_user, self.oai_user,
self.oai_password, self.oai_password,
envcomp, envcomp,
self.logdir + "/compile_softmodem." + self.enb_machine, self.logdir + "/compile_softmodem." + log_suffix + \
self.enb_machine,
post_action=post_action) post_action=post_action)
ret = task.wait() ret = task.wait()
if ret != 0: if ret != 0:
...@@ -162,6 +173,62 @@ class alu_test: ...@@ -162,6 +173,62 @@ class alu_test:
#not sure if we have to quit here or not #not sure if we have to quit here or not
#os._exit(1) #os._exit(1)
##########################################################################
# start_enb_rru_rcc
##########################################################################
def start_enb_rru_rcc(self, rru_config_file, rcc_config_file):
#copy wanted configuration files
quickshell("sshpass -p " + self.oai_password +
" scp config/" + rru_config_file + " " +
self.oai_user + "@" + self.enb_rru_machine+":/tmp/enb.conf")
quickshell("sshpass -p " + self.oai_password +
" scp config/" + rcc_config_file + " " +
self.oai_user + "@" + self.enb_rcc_machine+":/tmp/enb.conf")
#run RRU/RCC softmodem
log("INFO: ALU test: run RRU softmodem with configuration file " +
rru_config_file)
self.task_rru_enb = Task("actions/run_enb.bash",
"run_RRU_softmodem",
self.enb_rru_machine,
self.oai_user,
self.oai_password,
self.env,
self.logdir + "/run_softmodem." + self.enb_rru_machine,
event=self.event)
self.task_rru_enb.waitlog('[RRH] binding to')
log("INFO: ALU test: run RCC softmodem with configuration file " +
rcc_config_file)
self.task_rcc_enb = Task("actions/run_enb.bash",
"run_RCC_softmodem",
self.enb_rcc_machine,
self.oai_user,
self.oai_password,
self.env,
self.logdir + "/run_softmodem." + self.enb_rcc_machine,
event=self.event)
self.task_rcc_enb.waitlog('[BBU] local ip addr')
#wait for RRU and RCC to be connected
self.task_rru_enb.waitlog('devices ok (eNB_thread_asynch_rx)')
##########################################################################
# stop_enb_rru_rcc
##########################################################################
def stop_enb_rru_rcc(self):
log("INFO: ALU test: stop RRU/RCC softmodem")
self.task_rru_enb.sendnow("%c" % 3)
ret = self.task_rru_enb.wait()
if ret != 0:
log("ERROR: ALU test: RRU softmodem failed")
#not sure if we have to quit here or not
#os._exit(1)
self.task_rcc_enb.sendnow("%c" % 3)
ret = self.task_rcc_enb.wait()
if ret != 0:
log("ERROR: ALU test: RCC softmodem failed")
#not sure if we have to quit here or not
#os._exit(1)
########################################################################## ##########################################################################
# start_ue # start_ue
########################################################################## ##########################################################################
...@@ -185,7 +252,9 @@ class alu_test: ...@@ -185,7 +252,9 @@ class alu_test:
self.event.clear() self.event.clear()
if ( not self.task_enb.alive() or if ( (self.task_enb != None and not self.task_enb.alive()) or
(self.task_rru_enb!=None and not self.task_rru_enb.alive()) or
(self.task_rcc_enb!=None and not self.task_rcc_enb.alive()) or
not self.task_hss.alive() or not self.task_hss.alive() or
not self.task_ue.alive()): not self.task_ue.alive()):
log("ERROR: ALU test: eNB, HSS or UE task died") log("ERROR: ALU test: eNB, HSS or UE task died")
...@@ -250,14 +319,20 @@ class alu_test: ...@@ -250,14 +319,20 @@ class alu_test:
self.event.wait() self.event.wait()
log("DEBUG: event.wait() done") log("DEBUG: event.wait() done")
if ( not self.task_enb.alive() or if ( (self.task_enb != None and not self.task_enb.alive()) or
(self.task_rru_enb!=None and not self.task_rru_enb.alive()) or
(self.task_rcc_enb!=None and not self.task_rcc_enb.alive()) or
not self.task_hss.alive() or not self.task_hss.alive() or
not self.task_ue.alive()): not self.task_ue.alive()):
log("ERROR: unexpected task exited, test failed, kill all") log("ERROR: unexpected task exited, test failed, kill all")
if task_traffic_client.alive(): if task_traffic_client.alive():
task_traffic_client.kill() task_traffic_client.kill()
if self.task_enb.alive(): if (self.task_enb != None and self.task_enb.alive()):
self.task_enb.kill() self.task_enb.kill()
if (self.task_rru_enb != None and self.task_rru_enb.alive()):
self.task_rru_enb.kill()
if (self.task_rcc_enb != None and self.task_rcc_enb.alive()):
self.task_rcc_enb.kill()
if self.task_ue.alive(): if self.task_ue.alive():
self.task_ue.kill() self.task_ue.kill()
...@@ -277,7 +352,9 @@ class alu_test: ...@@ -277,7 +352,9 @@ class alu_test:
self.event.clear() self.event.clear()
if ( not self.task_enb.alive() or if ( (self.task_enb != None and not self.task_enb.alive()) or
(self.task_rru_enb!=None and not self.task_rru_enb.alive()) or
(self.task_rcc_enb!=None and not self.task_rcc_enb.alive()) or
not self.task_hss.alive() or not self.task_hss.alive() or
not self.task_ue.alive()): not self.task_ue.alive()):
log("ERROR: ALU test: eNB, HSS or UE task died") log("ERROR: ALU test: eNB, HSS or UE task died")
...@@ -334,8 +411,6 @@ class alu_test: ...@@ -334,8 +411,6 @@ class alu_test:
############################################################################## ##############################################################################
def run_b210_alu(tests, openair_dir, oai_user, oai_password, env): def run_b210_alu(tests, openair_dir, oai_user, oai_password, env):
if not do_tests(tests['b210']['alu']):
return
#compile eNB (two cases: one for FDD and one for TDD) #compile eNB (two cases: one for FDD and one for TDD)
...@@ -365,6 +440,44 @@ def run_b210_alu(tests, openair_dir, oai_user, oai_password, env): ...@@ -365,6 +440,44 @@ def run_b210_alu(tests, openair_dir, oai_user, oai_password, env):
log("ERROR: ALU test failed: eNB compilation failed: " + str(e)) log("ERROR: ALU test failed: eNB compilation failed: " + str(e))
return return
#compile RRU/RCC eNB
if do_tests(tests['remote b210']['alu']['fdd']):
#RRU
alu = alu_test(epc='amerique', ue='stevens',
openair=openair_dir,
user=oai_user, password=oai_password,
log_subdir='enb_tests/remote_b210_alu/compile_enb_rru',
env=env,
#hack: set 'enb' to reuse 'compile_enb'
enb = 'superserver',
enb_rru = 'superserver', enb_rcc = 'starsky')
try:
alu.compile_enb("--eNB -x -c -w USRP -t ETHERNET",
log_suffix='rru.')
except BaseException, e:
log("ERROR: ALU test failed: RRU eNB compilation failed: "+str(e))
return
#RCC
alu = alu_test(epc='amerique', ue='stevens',
openair=openair_dir,
user=oai_user, password=oai_password,
log_subdir='enb_tests/remote_b210_alu/compile_enb_rcc',
env=env,
#hack: set 'enb' to reuse 'compile_enb'
enb = 'starsky',
enb_rru = 'superserver', enb_rcc = 'starsky')
try:
alu.compile_enb("--eNB -w None -t ETHERNET",
log_suffix='rcc.')
except BaseException, e:
log("ERROR: ALU test failed: RCC eNB compilation failed: "+str(e))
return
#run tests #run tests
udp_dl_bandwidth = { "5" : "15M", udp_dl_bandwidth = { "5" : "15M",
...@@ -410,3 +523,29 @@ def run_b210_alu(tests, openair_dir, oai_user, oai_password, env): ...@@ -410,3 +523,29 @@ def run_b210_alu(tests, openair_dir, oai_user, oai_password, env):
except BaseException, e: except BaseException, e:
log("ERROR: ALU test failed: " + str(e)) log("ERROR: ALU test failed: " + str(e))
alu.finish() alu.finish()
if do_tests(tests['remote b210']['alu'][mode][bw]):
log("INFO: ALU test: run RRU/RCC tests for bandwidth " + bw + " MHz")
ctest = tests['remote b210']['alu'][mode][bw]
alu = alu_test(epc='amerique', enb='', ue=ue_machine[mode],
openair=openair_dir,
user=oai_user, password=oai_password,
log_subdir='enb_tests/remote_b210_alu/' + bw,
env=env,
enb_rru='superserver', enb_rcc='starsky')
try:
alu.start_epc()
alu.start_enb_rru_rcc("rru.band7.tm1.if4p5." + bw + "MHz.udp.usrpb210.conf",
"rcc.band7.tm1.if4p5." + bw + "MHz.conf")
for ue in ('bandrich', '3276'):
if ue in ctest and do_tests(ctest[ue]):
alu.start_ue(ue)
if do_tests(ctest[ue]['tcp']['dl']): alu.dl_tcp(ue)
if do_tests(ctest[ue]['tcp']['ul']): alu.ul_tcp(ue)
if do_tests(ctest[ue]['udp']['dl']): alu.dl_udp(ue, udp_dl_bandwidth[bw])
if do_tests(ctest[ue]['udp']['ul']): alu.ul_udp(ue, udp_ul_bandwidth[bw])
alu.stop_ue(ue)
alu.stop_enb_rru_rcc()
alu.stop_epc()
except BaseException, e:
log("ERROR: ALU test failed: " + str(e))
alu.finish()
cmake_targets/autotests/v2/config/rcc.band7.tm1.if4p5.10MHz.conf 0 → 100644
View file @ a19a27ff
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
node_function = "NGFI_RCC_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 50;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -29;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.18/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.18/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
rrh_gw_config = (
{
local_if_name = "eth1";
remote_address = "10.10.10.157";
local_address = "10.10.10.18";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
tr_preference = "udp_if4p5";
rf_preference = "usrp_b200";
iq_txshift = 4;
tx_sample_advance = 80;
tx_scheduling_advance = 9;
if_compression = "alaw";
}
);
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
cmake_targets/autotests/v2/config/rcc.band7.tm1.if4p5.20MHz.conf 0 → 100644
View file @ a19a27ff
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
node_function = "NGFI_RCC_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 100;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -29;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.18/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.18/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
rrh_gw_config = (
{
local_if_name = "eth1";
remote_address = "10.10.10.157";
local_address = "10.10.10.18";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
tr_preference = "udp_if4p5";
rf_preference = "usrp_b200";
iq_txshift = 4;
tx_sample_advance = 80;
tx_scheduling_advance = 9;
if_compression = "alaw";
}
);
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
cmake_targets/autotests/v2/config/rcc.band7.tm1.if4p5.5MHz.conf 0 → 100644
View file @ a19a27ff
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
node_function = "NGFI_RCC_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -29;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.18/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.18/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
rrh_gw_config = (
{
local_if_name = "eth1";
remote_address = "10.10.10.157";
local_address = "10.10.10.18";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
tr_preference = "udp_if4p5";
rf_preference = "usrp_b200";
iq_txshift = 4;
tx_sample_advance = 80;
tx_scheduling_advance = 9;
if_compression = "alaw";
}
);
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
cmake_targets/autotests/v2/config/rru.band7.tm1.if4p5.10MHz.udp.usrpb210.conf 0 → 100644
View file @ a19a27ff
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
node_function = "NGFI_RRU_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 50;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -29;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -104;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.11";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth3";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.215/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth3";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.215/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
rrh_gw_config = (
{
local_if_name = "eth3";
remote_address = "10.10.10.18";
local_address = "10.10.10.157";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
tr_preference = "udp_if4p5";
rf_preference = "usrp_b200";
iq_txshift = 4;
tx_sample_advance = 80;
tx_scheduling_advance = 9;
if_compression = "alaw";
}
);
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
cmake_targets/autotests/v2/config/rru.band7.tm1.if4p5.20MHz.udp.usrpb210.conf 0 → 100644
View file @ a19a27ff
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
node_function = "NGFI_RRU_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 100;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -29;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -104;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.11";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth3";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.215/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth3";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.215/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
rrh_gw_config = (
{
local_if_name = "eth3";
remote_address = "10.10.10.18";
local_address = "10.10.10.157";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
tr_preference = "udp_if4p5";
rf_preference = "usrp_b200";
iq_txshift = 4;
tx_sample_advance = 80;
tx_scheduling_advance = 9;
if_compression = "alaw";
}
);
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
cmake_targets/autotests/v2/config/rru.band7.tm1.if4p5.5MHz.udp.usrpb210.conf 0 → 100644
View file @ a19a27ff
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
node_function = "NGFI_RRU_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -29;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -104;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.11";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth3";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.215/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth3";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.215/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
rrh_gw_config = (
{
local_if_name = "eth3";
remote_address = "10.10.10.18";
local_address = "10.10.10.157";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
tr_preference = "udp_if4p5";
rf_preference = "usrp_b200";
iq_txshift = 4;
tx_sample_advance = 80;
tx_scheduling_advance = 9;
if_compression = "alaw";
}
);
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
cmake_targets/autotests/v2/main.py
View file @ a19a27ff
...@@ -281,7 +281,7 @@ machine_list.wait_all_free() ...@@ -281,7 +281,7 @@ machine_list.wait_all_free()
############################################################################## ##############################################################################
tests = {} tests = {}
for a in { 'b210', 'x310', 'exmimo2' }: for a in { 'b210', 'remote b210', 'x310', 'exmimo2' }:
tests[a] = {} tests[a] = {}
for b in { 'alu', 'openair-cn' }: for b in { 'alu', 'openair-cn' }:
tests[a][b] = {} tests[a][b] = {}
...@@ -407,6 +407,19 @@ for test in todo_tests_ids: ...@@ -407,6 +407,19 @@ for test in todo_tests_ids:
if test=='017504':log('WARNING: skip test ' + test) #TODO if test=='017504':log('WARNING: skip test ' + test) #TODO
if test=='017505':log('WARNING: skip test ' + test) #TODO if test=='017505':log('WARNING: skip test ' + test) #TODO
if test=='017600':tests['remote b210']['alu']['fdd'][ '5']['bandrich']['udp']['ul']=True
if test=='017601':tests['remote b210']['alu']['fdd']['10']['bandrich']['udp']['ul']=True
if test=='017602':tests['remote b210']['alu']['fdd']['20']['bandrich']['udp']['ul']=True
if test=='017603':tests['remote b210']['alu']['fdd'][ '5']['bandrich']['udp']['dl']=True
if test=='017604':tests['remote b210']['alu']['fdd']['10']['bandrich']['udp']['dl']=True
if test=='017605':tests['remote b210']['alu']['fdd']['20']['bandrich']['udp']['dl']=True
if test=='017606':tests['remote b210']['alu']['fdd'][ '5']['bandrich']['tcp']['ul']=True
if test=='017607':tests['remote b210']['alu']['fdd']['10']['bandrich']['tcp']['ul']=True
if test=='017608':tests['remote b210']['alu']['fdd']['20']['bandrich']['tcp']['ul']=True
if test=='017609':tests['remote b210']['alu']['fdd'][ '5']['bandrich']['tcp']['dl']=True
if test=='017610':tests['remote b210']['alu']['fdd']['10']['bandrich']['tcp']['dl']=True
if test=='017611':tests['remote b210']['alu']['fdd']['20']['bandrich']['tcp']['dl']=True
if test=='018000':log('WARNING: skip test ' + test) #TODO if test=='018000':log('WARNING: skip test ' + test) #TODO
if test=='018001':log('WARNING: skip test ' + test) #TODO if test=='018001':log('WARNING: skip test ' + test) #TODO
if test=='018002':log('WARNING: skip test ' + test) #TODO if test=='018002':log('WARNING: skip test ' + test) #TODO
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment