small changes in RRC

openair2/RRC/LITE/L2_interface.c

@@ -727,7 +727,7 @@ void mac_eNB_rrc_ul_failure(const module_id_t Mod_instP,
                    rntiP);
 
   if (ue_context_p != NULL) {
-    LOG_I(RRC,"Frame %d, Subframe %d: UE %x UL failure, activating timer\n",rntiP);
+    LOG_I(RRC,"Frame %d, Subframe %d: UE %x UL failure, activating timer\n",frameP,subframeP,rntiP);
     ue_context_p->ue_context.ul_failure_timer=1;
   }
   else {

openair2/RRC/LITE/rrc_eNB.c

@@ -3724,6 +3724,7 @@ rrc_eNB_decode_ccch(
 #warning "TODO: stmsi_exist: remove UE from MAC/PHY (how?)"
 	      LOG_I(RRC," S-TMSI exists, ue_context_p %p\n",ue_context_p);
 	      stmsi_received=1;
+	      ue_context_p->ue_context.rnti = ctxt_pP->rnti;
 	      //   AssertFatal(0 == 1, "TODO: remove UE from MAC/PHY (how?)");
 	      //              ue_context_p = NULL;
             } else {
@@ -3766,12 +3767,19 @@ rrc_eNB_decode_ccch(
 
 #if defined(ENABLE_ITTI)
           ue_context_p->ue_context.establishment_cause = rrcConnectionRequest->establishmentCause;
+	  if (stmsi_received==0)
 	    LOG_I(RRC, PROTOCOL_RRC_CTXT_UE_FMT" Accept new connection from UE random UE identity (0x%" PRIx64 ") MME code %u TMSI %u cause %u\n",
 		  PROTOCOL_RRC_CTXT_UE_ARGS(ctxt_pP),
 		  ue_context_p->ue_context.random_ue_identity,
 		  ue_context_p->ue_context.Initialue_identity_s_TMSI.mme_code,
 		  ue_context_p->ue_context.Initialue_identity_s_TMSI.m_tmsi,
 		  ue_context_p->ue_context.establishment_cause);
+	  else
+	    LOG_I(RRC, PROTOCOL_RRC_CTXT_UE_FMT" Accept new connection from UE  MME code %u TMSI %u cause %u\n",
+		  PROTOCOL_RRC_CTXT_UE_ARGS(ctxt_pP),
+		  ue_context_p->ue_context.Initialue_identity_s_TMSI.mme_code,
+		  ue_context_p->ue_context.Initialue_identity_s_TMSI.m_tmsi,
+		  ue_context_p->ue_context.establishment_cause);
 #else
           LOG_I(RRC, PROTOCOL_RRC_CTXT_UE_FMT" Accept new connection for UE random UE identity (0x%" PRIx64 ")\n",
                 PROTOCOL_RRC_CTXT_UE_ARGS(ctxt_pP),

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf

@@ -17,7 +17,7 @@ eNBs =
 
     mobile_country_code =  "208";
 
-    mobile_network_code =  "92";
+    mobile_network_code =  "93";
 
        ////////// Physical parameters:
 
@@ -133,7 +133,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+    mme_ip_address      = ( { ipv4       = "192.168.12.11";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -145,8 +145,8 @@ rrh_gw_config = (
     local_if_name = "eth0";			  
     #remote_address = "169.254.10.158";	
     #local_address = "169.254.8.15";				  
-    remote_address = "74:d4:35:cc:88:45";
-    local_address = "98:90:96:df:66:07";    
+    remote_address = "74:d4:35:cc:88:d1"; #bourdon
+    local_address = "74:d4:35:cc:8d:15";  #papillon  
     local_port = 50000;	#for raw option local port must be the same to remote	       
     remote_port = 50000; 
     rrh_gw_active = "yes";
@@ -161,13 +161,13 @@ rrh_gw_config = (
 
     NETWORK_INTERFACES :
     {
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth4";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth3";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.215/24";
 
-        ENB_INTERFACE_NAME_FOR_S1U               = "eth4";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth3";
 
 
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.215/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
     };