Skip to content

O
OpenXG-RAN
Commit bd7ec70c authored by Raymond Knopp's avatar Raymond Knopp
Browse files
Options

changes from fourmi

parent ee1d0d56
Show whitespace changes
Inline Side-by-side
Showing with 12 additions and 12 deletions
targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
View file @ bd7ec70c
...@@ -305,11 +305,11 @@ int trx_usrp_stop(int card) { ...@@ -305,11 +305,11 @@ int trx_usrp_stop(int card) {
rx_gain_calib_table_t calib_table_b210[] = { rx_gain_calib_table_t calib_table_b210[] = {
{3500000000.0,47.0}, {3500000000.0,44.0},
{2660000000.0,53.0}, {2660000000.0,49.0},
{2300000000.0,54.0}, {2300000000.0,50.0},
{1880000000.0,55.0}, {1880000000.0,53.0},
{816000000.0,62.0}, {816000000.0,58.0},
{-1,0}}; {-1,0}};
rx_gain_calib_table_t calib_table_b210_38[] = { rx_gain_calib_table_t calib_table_b210_38[] = {
...@@ -507,7 +507,7 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_ ...@@ -507,7 +507,7 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_
case 30720000: case 30720000:
s->usrp->set_master_clock_rate(30.72e6); s->usrp->set_master_clock_rate(30.72e6);
// from usrp_time_offset // from usrp_time_offset
openair0_cfg[0].samples_per_packet = 2048; openair0_cfg[0].samples_per_packet = 4096;
openair0_cfg[0].tx_sample_advance = 115; openair0_cfg[0].tx_sample_advance = 115;
openair0_cfg[0].tx_bw = 20e6; openair0_cfg[0].tx_bw = 20e6;
openair0_cfg[0].rx_bw = 20e6; openair0_cfg[0].rx_bw = 20e6;
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210.conf
View file @ bd7ec70c
...@@ -36,7 +36,7 @@ eNBs = ...@@ -36,7 +36,7 @@ eNBs =
nb_antennas_tx = 1; nb_antennas_tx = 1;
nb_antennas_rx = 1; nb_antennas_rx = 1;
tx_gain = 90; tx_gain = 90;
rx_gain = 130; rx_gain = 125;
prach_root = 0; prach_root = 0;
prach_config_index = 0; prach_config_index = 0;
prach_high_speed = "DISABLE"; prach_high_speed = "DISABLE";
...@@ -140,10 +140,10 @@ eNBs = ...@@ -140,10 +140,10 @@ eNBs =
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.213/24"; ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.212/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0"; ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.213/24"; ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.212/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_PORT_FOR_S1U = 2152; # Spec 2152
}; };
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf
View file @ bd7ec70c
...@@ -36,7 +36,7 @@ eNBs = ...@@ -36,7 +36,7 @@ eNBs =
nb_antennas_tx = 1; nb_antennas_tx = 1;
nb_antennas_rx = 1; nb_antennas_rx = 1;
tx_gain = 90; tx_gain = 90;
rx_gain = 132; rx_gain = 125;
prach_root = 0; prach_root = 0;
prach_config_index = 0; prach_config_index = 0;
prach_high_speed = "DISABLE"; prach_high_speed = "DISABLE";
...@@ -143,10 +143,10 @@ eNBs = ...@@ -143,10 +143,10 @@ eNBs =
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.213/24"; ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.212/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0"; ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.213/24"; ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.212/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_PORT_FOR_S1U = 2152; # Spec 2152
}; };
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment