Skip to content

O
OpenXG-RAN
Commit d38501c9 authored by Matthieu Kanj's avatar Matthieu Kanj
Browse files
Options

test version

parent 008f825c
Hide whitespace changes
Inline Side-by-side
Showing with 195 additions and 80 deletions
openair1/PHY/CODING/ccoding_byte_NB_IoT.c
View file @ d38501c9
/*********************************************************************** /*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.0 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
**********************************************************************/
/*! \file PHY/LTE_CODING/ccoding_byte_NB_IoT.c /*! \file PHY/LTE_CODING/ccoding_byte_NB_IoT.c
* \Fucntions for CRC attachment and tail-biting convolutional coding for NPBCH channel, TS 36-212, V13.4.0 2017-02 * \Fucntions for CRC attachment and tail-biting convolutional coding for NPBCH channel, TS 36-212, V13.4.0 2017-02
* \author M. KANJ * \author M. KANJ
......
openair1/PHY/LTE_TRANSPORT/defs_NB_IoT.h
View file @ d38501c9
...@@ -188,19 +188,18 @@ typedef struct { ...@@ -188,19 +188,18 @@ typedef struct {
uint8_t d[96+(3*(24+56))]; // new parameter uint8_t d[96+(3*(24+56))]; // new parameter
/// Sub-block interleaver outputs /// Sub-block interleaver outputs
uint8_t w[3*3*(56+24)]; // new parameter uint8_t w[3*3*(56+24)]; // new parameter
///////////////////////////////// /////////////////////////////////
uint16_t si_rnti_x; uint16_t si_rnti_x;
/// Concatenated "e"-sequences (for definition see 36-212 V8.6 2009-03, p.17-18) /// Concatenated "e"-sequences (for definition see 36-212 V8.6 2009-03, p.17-18)
uint8_t e_x[236]; uint8_t e_x[472];
/// data after scrambling /// data after scrambling
uint8_t s_e_x[236]; uint8_t s_e_x[472];
//length of the table e //length of the table e
uint16_t length_e_x; // new parameter uint16_t length_e_x; // new parameter
/// Tail-biting convolutional coding outputs /// Tail-biting convolutional coding outputs
uint8_t d_x[96+(3*(24+120))]; // new parameter uint8_t d_x[96+(3*(24+256))]; // new parameter
/// Sub-block interleaver outputs /// Sub-block interleaver outputs
uint8_t w_x[3*3*(120+24)]; // new parameter uint8_t w_x[3*3*(256+24)]; // new parameter
//////////////////////////////// ////////////////////////////////
/// Status Flag indicating for this DLSCH (idle,active,disabled) /// Status Flag indicating for this DLSCH (idle,active,disabled)
......
openair1/PHY/LTE_TRANSPORT/dlsch_coding_NB_IoT.c
View file @ d38501c9
...@@ -163,14 +163,19 @@ int dlsch_encoding_rar_NB_IoT(unsigned char *a, ...@@ -163,14 +163,19 @@ int dlsch_encoding_rar_NB_IoT(unsigned char *a,
bzero(npbch_a,7); bzero(npbch_a,7);
bzero(npbch_a_crc,10); bzero(npbch_a_crc,10);
uint8_t npbch_a_x[15]; /*uint8_t npbch_a_x[15];
uint8_t npbch_a_crc_x[18]; uint8_t npbch_a_crc_x[18];
bzero(npbch_a_x,15); bzero(npbch_a_x,15);
bzero(npbch_a_crc_x,18); bzero(npbch_a_crc_x,18);*/
uint8_t npbch_a_x[32];
uint8_t npbch_a_crc_x[35];
bzero(npbch_a_x,32);
bzero(npbch_a_crc_x,35);
dlsch->length_e = G; // G*Nsf (number_of_subframes) = total number of bits to transmit G=236 dlsch->length_e = G*Nsf; // G*Nsf (number_of_subframes) = total number of bits to transmit G=236
...@@ -182,8 +187,8 @@ if(option ==1) ...@@ -182,8 +187,8 @@ if(option ==1)
npbch_a[i] = a[i]; npbch_a[i] = a[i];
} }
} else { } else {
A = 120; A = 256;
for (int i=0; i<15; i++) for (int i=0; i<32; i++)
{ {
npbch_a_x[i] = a[i]; npbch_a_x[i] = a[i];
} }
...@@ -218,14 +223,14 @@ if(option ==1) ...@@ -218,14 +223,14 @@ if(option ==1)
crc = crc24a_NB_IoT(npbch_a_x,A)>>8; crc = crc24a_NB_IoT(npbch_a_x,A)>>8;
for (int j=0; j<15; j++) for (int j=0; j<32; j++)
{ {
npbch_a_crc_x[j] = npbch_a_x[j]; npbch_a_crc_x[j] = npbch_a_x[j];
} }
npbch_a_crc_x[15] = ((uint8_t*)&crc)[2]; npbch_a_crc_x[32] = ((uint8_t*)&crc)[2];
npbch_a_crc_x[16] = ((uint8_t*)&crc)[1]; npbch_a_crc_x[33] = ((uint8_t*)&crc)[1];
npbch_a_crc_x[17] = ((uint8_t*)&crc)[0]; npbch_a_crc_x[34] = ((uint8_t*)&crc)[0];
dlsch->B = numbits; // The length of table b in bits dlsch->B = numbits; // The length of table b in bits
//memcpy(dlsch->b,a,numbits/8); // comment if option 2 //memcpy(dlsch->b,a,numbits/8); // comment if option 2
......
openair1/PHY/LTE_TRANSPORT/dlsch_modulation_NB_IoT.c
View file @ d38501c9
...@@ -207,7 +207,8 @@ int dlsch_modulation_rar_NB_IoT(int32_t **txdataF, ...@@ -207,7 +207,8 @@ int dlsch_modulation_rar_NB_IoT(int32_t **txdataF,
int G, // number of bits per subframe int G, // number of bits per subframe
unsigned int npdsch_data_subframe, // subframe index of the data table of npdsch channel (G*Nsf) , values are between 0..Nsf unsigned int npdsch_data_subframe, // subframe index of the data table of npdsch channel (G*Nsf) , values are between 0..Nsf
unsigned int subframe, unsigned int subframe,
unsigned short NB_IoT_RB_ID) unsigned short NB_IoT_RB_ID,
uint8_t option)
{ {
//uint8_t harq_pid = dlsch0->current_harq_pid; //uint8_t harq_pid = dlsch0->current_harq_pid;
//NB_IoT_DL_eNB_HARQ_t *dlsch0_harq = dlsch0->harq_processes[harq_pid]; //NB_IoT_DL_eNB_HARQ_t *dlsch0_harq = dlsch0->harq_processes[harq_pid];
...@@ -245,8 +246,20 @@ int dlsch_modulation_rar_NB_IoT(int32_t **txdataF, ...@@ -245,8 +246,20 @@ int dlsch_modulation_rar_NB_IoT(int32_t **txdataF,
} }
symbol_offset = (14*subframe*frame_parms->ofdm_symbol_size) + frame_parms->ofdm_symbol_size*l + NB_IoT_start; // symbol_offset = 512 * L + NB_IOT_RB start symbol_offset = (14*subframe*frame_parms->ofdm_symbol_size) + frame_parms->ofdm_symbol_size*l + NB_IoT_start; // symbol_offset = 512 * L + NB_IOT_RB start
if(option ==2)
allocate_REs_in_RB_NB_IoT(frame_parms, {
allocate_REs_in_RB_NB_IoT(frame_parms,
txdataF,
&jj,
symbol_offset,
&dlsch0->s_e[236],
pilots,
amp,
id_offset,
pilot_shift,
&re_allocated);
} else {
allocate_REs_in_RB_NB_IoT(frame_parms,
txdataF, txdataF,
&jj, &jj,
symbol_offset, symbol_offset,
...@@ -256,6 +269,7 @@ int dlsch_modulation_rar_NB_IoT(int32_t **txdataF, ...@@ -256,6 +269,7 @@ int dlsch_modulation_rar_NB_IoT(int32_t **txdataF,
id_offset, id_offset,
pilot_shift, pilot_shift,
&re_allocated); &re_allocated);
}
} }
// VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_ENB_DLSCH_MODULATION, VCD_FUNCTION_OUT); // VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_ENB_DLSCH_MODULATION, VCD_FUNCTION_OUT);
......
openair1/PHY/LTE_TRANSPORT/proto_NB_IoT.h
View file @ d38501c9
...@@ -303,7 +303,8 @@ int dlsch_modulation_rar_NB_IoT(int32_t **txdataF, ...@@ -303,7 +303,8 @@ int dlsch_modulation_rar_NB_IoT(int32_t **txdataF,
int G, // number of bits per subframe int G, // number of bits per subframe
unsigned int npdsch_data_subframe, // subframe index of the data table of npdsch channel (G*Nsf) , values are between 0..Nsf unsigned int npdsch_data_subframe, // subframe index of the data table of npdsch channel (G*Nsf) , values are between 0..Nsf
unsigned int subframe, unsigned int subframe,
unsigned short NB_IoT_RB_ID); unsigned short NB_IoT_RB_ID,
uint8_t option);
int32_t dlsch_encoding_NB_IoT(unsigned char *a, int32_t dlsch_encoding_NB_IoT(unsigned char *a,
NB_IoT_DL_eNB_SIB_t *dlsch, // NB_IoT_eNB_NDLSCH_t NB_IoT_DL_eNB_SIB_t *dlsch, // NB_IoT_eNB_NDLSCH_t
......
openair1/PHY/defs_common.h
View file @ d38501c9
...@@ -79,6 +79,9 @@ typedef struct { ...@@ -79,6 +79,9 @@ typedef struct {
uint32_t frame_dscr_msg3; uint32_t frame_dscr_msg3;
uint32_t subframe_dscr_msg3; uint32_t subframe_dscr_msg3;
uint32_t frame_msg5;
uint32_t subframe_msg5;
uint8_t rar_to_transmit; uint8_t rar_to_transmit;
uint8_t subframe_SP; uint8_t subframe_SP;
uint8_t subframe_SP2; uint8_t subframe_SP2;
...@@ -108,11 +111,13 @@ typedef struct { ...@@ -108,11 +111,13 @@ typedef struct {
uint32_t subframe_msg4; uint32_t subframe_msg4;
uint8_t guard; uint8_t guard;
uint8_t counter_msg5;
uint8_t remaining_dci; uint8_t remaining_dci;
uint8_t remaining_rar; uint8_t remaining_rar;
uint8_t flag_msg5;
} eNB_rxtx_proc_t; } eNB_rxtx_proc_t;
/// Context data structure for eNB subframe processing /// Context data structure for eNB subframe processing
......
openair1/SCHED/phy_procedures_lte_eNb.c
View file @ d38501c9
...@@ -537,6 +537,12 @@ void common_signal_procedures (PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc) { ...@@ -537,6 +537,12 @@ void common_signal_procedures (PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc) {
}*/ }*/
///////////////////////////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////// Decoding ACK ////////////////////////////////
if(subframe==proc->subframe_msg5 && frame==proc->frame_msg5 && proc->flag_msg5==1 && proc->counter_msg5>0)
{
int x=0;
}
////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////// RX NPUSH ////////////////////////////////////// /////////////////////////////////////////////////// RX NPUSH //////////////////////////////////////
if(subframe==proc->subframe_real && proc->flag_msg3==1 && frame==proc->frame_msg3 && proc->counter_msg3>0) ///&& frame == ???? if(subframe==proc->subframe_real && proc->flag_msg3==1 && frame==proc->frame_msg3 && proc->counter_msg3>0) ///&& frame == ????
...@@ -583,48 +589,50 @@ void common_signal_procedures (PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc) { ...@@ -583,48 +589,50 @@ void common_signal_procedures (PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc) {
l/(fp->symbols_per_tti/2), l/(fp->symbols_per_tti/2),
fp); fp);
/// Channel Estimation /// Channel Estimation
ul_chest_tmp_NB_IoT(pusch_vars->rxdataF_ext[0], ul_chest_tmp_NB_IoT(pusch_vars->rxdataF_ext[0],
pusch_vars->drs_ch_estimates[0], pusch_vars->drs_ch_estimates[0],
l%(fp->symbols_per_tti/2), //symbol within slot l%(fp->symbols_per_tti/2), //symbol within slot
l/(fp->symbols_per_tti/2), l/(fp->symbols_per_tti/2),
proc->counter_msg3, proc->counter_msg3,
fp); fp);
} }
for (l=0; l<fp->symbols_per_tti; l++) for (l=0; l<fp->symbols_per_tti; l++)
{ {
/// Equalization /// Equalization
ul_chequal_tmp_NB_IoT(pusch_vars->rxdataF_ext[0], ul_chequal_tmp_NB_IoT(pusch_vars->rxdataF_ext[0],
pusch_vars->rxdataF_comp[0], pusch_vars->rxdataF_comp[0],
pusch_vars->drs_ch_estimates[0], pusch_vars->drs_ch_estimates[0],
l%(fp->symbols_per_tti/2), //symbol within slot l%(fp->symbols_per_tti/2), //symbol within slot
l/(fp->symbols_per_tti/2), l/(fp->symbols_per_tti/2),
fp); fp);
} }
for (l=0; l<fp->symbols_per_tti; l++) for (l=0; l<fp->symbols_per_tti; l++)
{ {
/// In case of 1 subcarrier: BPSK and QPSK should be rotated by pi/2 and pi/4, respectively /// In case of 1 subcarrier: BPSK and QPSK should be rotated by pi/2 and pi/4, respectively
rotate_single_carrier_NB_IoT(eNB, rotate_single_carrier_NB_IoT(eNB,
fp, fp,
pusch_vars->rxdataF_comp[0], pusch_vars->rxdataF_comp[0],
0, // UE ID 0, // UE ID
l, l,
proc->counter_msg3, proc->counter_msg3,
2); // Qm 2); // Qm
} }
proc->subframe_delay++; proc->subframe_delay++;
if(proc->subframe_delay==10) ///&& frame == ????
if(proc->subframe_delay==10) ///&& frame == ????
{ {
proc->subframe_delay=0; proc->subframe_delay=0;
} }
proc->subframe_delay++;
proc->subframe_delay++;
///////// IDFT inverse precoding is done over the whole subframe of 14 - 2 (pilots) symbols ///////// IDFT inverse precoding is done over the whole subframe of 14 - 2 (pilots) symbols
...@@ -633,7 +641,7 @@ void common_signal_procedures (PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc) { ...@@ -633,7 +641,7 @@ void common_signal_procedures (PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc) {
// 12); // IDFT size // 12); // IDFT size
llrp = (int16_t*)&pusch_vars->llr[0+ (8-proc->counter_msg3)*24]; llrp = (int16_t*)&pusch_vars->llr[0+ (8-proc->counter_msg3)*24];
int ii=0; int ii=0;
for (l=0; l<fp->symbols_per_tti; l++) for (l=0; l<fp->symbols_per_tti; l++)
{ {
if (l==pilot_pos1 || l==pilot_pos2) // skip pilots if (l==pilot_pos1 || l==pilot_pos2) // skip pilots
...@@ -648,7 +656,7 @@ void common_signal_procedures (PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc) { ...@@ -648,7 +656,7 @@ void common_signal_procedures (PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc) {
l, l,
0, // UE ID 0, // UE ID
&llrp[ii*2]); //// !!! Pensez à créer un buffer de longueur 8 subframes &llrp[ii*2]); //// !!! Pensez à créer un buffer de longueur 8 subframes
ii++; ii++;
} }
/*printf("\n"); /*printf("\n");
...@@ -1009,23 +1017,17 @@ void common_signal_procedures (PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc) { ...@@ -1009,23 +1017,17 @@ void common_signal_procedures (PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc) {
////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////
if(proc->flag_msg4 == 1 && proc->counter_msg4 > 0) if(proc->flag_msg4 == 1 && proc->counter_msg4 > 0)
{ {
if(subframe==9)
{
proc->subframe_msg4=1;
proc->frame_msg4= frame+1;
} else {
if(frame == proc->frame_msg4 && subframe == proc->subframe_msg4) if(frame == proc->frame_msg4 && subframe == proc->subframe_msg4)
{ {
NB_IoT_DL_eNB_RAR_t *rar = &eNB->ndlsch_rar.content_rar; NB_IoT_DL_eNB_RAR_t *rar = &eNB->ndlsch_rar.content_rar;
uint8_t tab_rar[15]; //uint8_t tab_rar[15];
//uint8_t tab_rar[7]; //uint8_t tab_rar[18];
uint8_t tab_rar[7];
uint8_t *nas_id = &eNB->msg3_pdu[0]; uint8_t *nas_id = &eNB->msg3_pdu[0];
//uint8_t *NAS_tab = &eNB->tab_nas; //uint8_t *NAS_tab = &eNB->tab_nas;
// avoid subframe 9 and subframe 0 of next frame // avoid subframe 9 and subframe 0 of next frame
/*tab_rar[0]=63; /* tab_rar[0]=63;
tab_rar[1]=60; tab_rar[1]=60;
tab_rar[2]=0; tab_rar[2]=0;
tab_rar[3]=nas_id[0]; // NAS part 1 tab_rar[3]=nas_id[0]; // NAS part 1
...@@ -1041,7 +1043,27 @@ if(proc->flag_msg4 == 1 && proc->counter_msg4 > 0) ...@@ -1041,7 +1043,27 @@ if(proc->flag_msg4 == 1 && proc->counter_msg4 > 0)
tab_rar[13]=145; tab_rar[13]=145;
tab_rar[14]=8;*/ tab_rar[14]=8;*/
/*
tab_rar[0]=63;
tab_rar[1]=60;
tab_rar[2]=0;
tab_rar[3]=nas_id[0]; // NAS part 1
tab_rar[4]=nas_id[1]; // NAS part 2
tab_rar[5]=nas_id[2]; // NAS part 3
tab_rar[6]=nas_id[3]; // NAS part 4
tab_rar[7]=nas_id[4]; // NAS part 5
tab_rar[8]=nas_id[5]; // NAS part 6
tab_rar[9]=48;
tab_rar[10]=19;
tab_rar[11]=176;
tab_rar[12]=216;
tab_rar[13]=134;
tab_rar[14]=114;
tab_rar[15]=68;
tab_rar[16]=32;
tab_rar[17]=32;
*/
tab_rar[0]=28; tab_rar[0]=28;
tab_rar[1]=nas_id[0]; // NAS part 1 tab_rar[1]=nas_id[0]; // NAS part 1
...@@ -1052,14 +1074,11 @@ if(proc->flag_msg4 == 1 && proc->counter_msg4 > 0) ...@@ -1052,14 +1074,11 @@ if(proc->flag_msg4 == 1 && proc->counter_msg4 > 0)
tab_rar[6]=nas_id[5]; // NAS part 5 tab_rar[6]=nas_id[5]; // NAS part 5
printf("ms4pdu[0] = %d \n",nas_id[0]);
printf("ms4pdu[1] = %d \n",nas_id[1]);
printf("ms4pdu[2] = %d \n",nas_id[2]);
printf("ms4pdu[0] = %d \n",nas_id[0]); printf("ms4pdu[3] = %d \n",nas_id[3]);
printf("ms4pdu[1] = %d \n",nas_id[1]); printf("ms4pdu[2] = %d \n",nas_id[4]);
printf("ms4pdu[2] = %d \n",nas_id[2]);
printf("ms4pdu[3] = %d \n",nas_id[3]);
printf("ms4pdu[2] = %d \n",nas_id[4]);
if(proc->flag_scrambling ==0) if(proc->flag_scrambling ==0)
...@@ -1067,7 +1086,7 @@ if(proc->flag_msg4 == 1 && proc->counter_msg4 > 0) ...@@ -1067,7 +1086,7 @@ if(proc->flag_msg4 == 1 && proc->counter_msg4 > 0)
dlsch_encoding_rar_NB_IoT(tab_rar, dlsch_encoding_rar_NB_IoT(tab_rar,
rar, rar,
8, ///// number_of_subframes_required 2, ///// number_of_subframes_required
236, 236,
1); //////////// G*2 // option =2 for msg4 1); //////////// G*2 // option =2 for msg4
...@@ -1081,7 +1100,9 @@ if(proc->flag_msg4 == 1 && proc->counter_msg4 > 0) ...@@ -1081,7 +1100,9 @@ if(proc->flag_msg4 == 1 && proc->counter_msg4 > 0)
} }
proc->flag_scrambling =1; proc->flag_scrambling =1;
printf("\n RAR sentttttt frame %d, subframe %d", frame, subframe); printf("\n RAR sentttttt frame %d, subframe %d", frame, subframe);
dlsch_modulation_rar_NB_IoT(txdataF, /* if(proc->counter_msg4 == 3 || proc->counter_msg4 ==1)
{
dlsch_modulation_rar_NB_IoT(txdataF,
AMP, AMP,
fp, fp,
3, // control region size for LTE , values between 0..3, (0 for stand-alone / 1, 2 or 3 for in-band) 3, // control region size for LTE , values between 0..3, (0 for stand-alone / 1, 2 or 3 for in-band)
...@@ -1089,13 +1110,47 @@ if(proc->flag_msg4 == 1 && proc->counter_msg4 > 0) ...@@ -1089,13 +1110,47 @@ if(proc->flag_msg4 == 1 && proc->counter_msg4 > 0)
236, // number of bits per subframe 236, // number of bits per subframe
frame, // unrequired frame, // unrequired
subframe, subframe,
22); 22,
2);
} else {*/
dlsch_modulation_rar_NB_IoT(txdataF,
AMP,
fp,
3, // control region size for LTE , values between 0..3, (0 for stand-alone / 1, 2 or 3 for in-band)
rar,
236, // number of bits per subframe
frame, // unrequired
subframe,
22,
0);
// }
proc->counter_msg4--; proc->counter_msg4--;
proc->subframe_msg4 =subframe+1; proc->subframe_msg4 =subframe+1;
if(proc->counter_msg4 == 0)
{
proc->flag_msg5 =1;
proc->counter_msg5 =2;
proc->subframe_msg5= (subframe+12+1+4)%10;
if( ((subframe+12+1+4)%10) <20)
{
proc->frame_msg5=frame + 2;
}else{
proc->frame_msg5=frame + 3;
}
}
} }
} if(subframe==9)
{
proc->subframe_msg4=1;
proc->frame_msg4= frame+1;
}
} }
...@@ -1154,15 +1209,29 @@ if(proc->flag_DCI_msg4 ==1 && proc->counter_DCI_msg4>0) ...@@ -1154,15 +1209,29 @@ if(proc->flag_DCI_msg4 ==1 && proc->counter_DCI_msg4>0)
proc->flag_scrambling =0; /// for msg4 PDU proc->flag_scrambling =0; /// for msg4 PDU
int32_t numbits = 23; int32_t numbits = 23;
uint8_t RCC; uint8_t RCC;
uint16_t npdcch_D = 16 + 23; uint16_t npdcch_D = 16 + 23;
uint16_t npdcch_E = 236; uint16_t npdcch_E = 236;
uint8_t agr_level = 2; uint8_t agr_level = 2;
// uint8_t dci_number=1; // uint8_t dci_number=1;
uint8_t tab_a[3]; uint8_t tab_a[3];
tab_a[0]= 128; /* tab_a[0]= 128;
tab_a[1]= 66; tab_a[1]= 66;
tab_a[2]= 4; tab_a[2]= 4;
*/
// TBS =120
tab_a[0]= 129;
tab_a[1]= 130;
tab_a[2]= 2;
/* // TBS =144
tab_a[0]= 128;
tab_a[1]= 130;
tab_a[2]= 4;
*/
// int RB_ID_IoT=22 ; // int RB_ID_IoT=22 ;
bzero(npdcch_struct_x->npdcch_e[0],npdcch_E); bzero(npdcch_struct_x->npdcch_e[0],npdcch_E);
...@@ -1214,7 +1283,7 @@ if(proc->flag_DCI_msg4 ==1 && proc->counter_DCI_msg4>0) ...@@ -1214,7 +1283,7 @@ if(proc->flag_DCI_msg4 ==1 && proc->counter_DCI_msg4>0)
proc->subframe_real=-1; proc->subframe_real=-1;
proc->subframe_delay=-1; proc->subframe_delay=-1;
proc->flag_msg5 =0;
proc->flag_msg4 =0; proc->flag_msg4 =0;
proc->subframe_SP2 =0; proc->subframe_SP2 =0;
proc->subframe_SP =0; proc->subframe_SP =0;
...@@ -1227,7 +1296,9 @@ if(proc->flag_DCI_msg4 ==1 && proc->counter_DCI_msg4>0) ...@@ -1227,7 +1296,9 @@ if(proc->flag_DCI_msg4 ==1 && proc->counter_DCI_msg4>0)
proc->guard=5; proc->guard=5;
proc->subframe_DCI_msg4=0; proc->subframe_DCI_msg4=0;
proc->subframe_msg4=0; proc->subframe_msg4=0;
proc->counter_msg5 =0;
proc->frame_msg5=0;
proc->subframe_msg5=0;
//printf("detection ok in TX !!!!!!!!!!!!!!!!!"); //printf("detection ok in TX !!!!!!!!!!!!!!!!!");
//RA_template[0].generate_rar = 0; //RA_template[0].generate_rar = 0;
//RA_template[0].RA_active = FALSE; //RA_template[0].RA_active = FALSE;
...@@ -1588,7 +1659,8 @@ if(subframe !=5 && subframe !=0) ...@@ -1588,7 +1659,8 @@ if(subframe !=5 && subframe !=0)
236, // number of bits per subframe 236, // number of bits per subframe
frame, // unrequired frame, // unrequired
subframe, subframe,
22); 22,
0);
proc->remaining_rar--; proc->remaining_rar--;
proc->next_subframe_tx =subframe+2; proc->next_subframe_tx =subframe+2;
...@@ -1637,7 +1709,8 @@ if(subframe !=5 && subframe !=0) ...@@ -1637,7 +1709,8 @@ if(subframe !=5 && subframe !=0)
236, // number of bits per subframe 236, // number of bits per subframe
frame, // unrequired frame, // unrequired
subframe, subframe,
22); 22,
0);
proc->remaining_rar--; proc->remaining_rar--;
proc->next_subframe_tx =subframe+1; proc->next_subframe_tx =subframe+1;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment