Fix #582, ENABLE_PGM_TRANSPORT removed, RRH related removed

cmake_targets/CMakeLists.txt

@@ -608,12 +608,6 @@ add_boolean_option(FLEXRAN_AGENT_SB_IF             False         "enable FlexRAN
 ##########################
 add_boolean_option(ENB_MODE True "Swap the include directories between openair2 and openair3" )
 
-##########################
-# Emulation options
-##########################
-add_boolean_option(ENABLE_PGM_TRANSPORT    False "specific to oaisim, emulation through ethernet, reliable multicast")
-add_boolean_option(ADDR_CONF               False "specific to oaisim, IP autoconf of user-plane IP interface")
-
 ##########################
 # SCHEDULING/REAL-TIME/PERF options
 ##########################
@@ -1595,7 +1589,6 @@ ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/multicast_link.c
 ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/socket.c
 ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/bypass_session_layer.c
 #${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/emu_transport.c
-${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/pgm_link.c
 )
 
 add_library(OPENAIR0_LIB
@@ -1812,27 +1805,6 @@ target_link_libraries (lte-softmodem-nos1 pthread m ${CONFIG_LIBRARIES} rt crypt
 target_link_libraries (lte-softmodem-nos1  ${LIB_LMS_LIBRARIES})
 target_link_libraries (lte-softmodem-nos1 ${T_LIB})
 
-# rrh
-################################
-#Note: only one RF type (USRP) is currently supported for RRH
-add_executable(rrh_gw
-  ${OPENAIR_TARGETS}/RT/USER/rrh_gw.c
-  ${OPENAIR_TARGETS}/RT/USER/eNB_transport_IQ.c
-  ${OPENAIR_TARGETS}/RT/USER/UE_transport_IQ.c
-  ${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
-  ${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c
-  ${T_SOURCE}
-  )
-target_include_directories(rrh_gw PRIVATE  ${OPENAIR_DIR}/common/utils/itti)
-target_link_libraries(rrh_gw
-  -Wl,--start-group
-  UTIL LFDS -ldl
-  -Wl,--end-group )
-target_link_libraries (rrh_gw rt pthread m )
-target_link_libraries (rrh_gw ${LIB_LMS_LIBRARIES})
-target_link_libraries (rrh_gw ${T_LIB})
-
-
 # USIM process
 #################
 #add_executable(usim
@@ -2047,7 +2019,7 @@ endforeach(myExe)
 if (${T_TRACER})
   foreach(i
         #all "add_executable" definitions (except tests, rb_tool, updatefw)
-        lte-softmodem lte-softmodem-nos1 rrh_gw oaisim oaisim_nos1
+        lte-softmodem lte-softmodem-nos1 oaisim oaisim_nos1
         dlsim_tm4 dlsim dlsim_tm7 ulsim pbchsim scansim mbmssim
         pdcchsim pucchsim prachsim syncsim
         #all "add_library" definitions

cmake_targets/build_oai

@@ -100,8 +100,6 @@ Options
    Specify conf_nvram_path (default \"$conf_nvram_path\")
 --UE-gen-nvram [output path]
    Specify gen_nvram_path (default \"$gen_nvram_path\")
---RRH
-   Makes the RRH
 -a | --agent
    Enables agent for software-defined control of the eNB
 -r | --3gpp-release
@@ -219,10 +217,6 @@ function main() {
         --UE-gen-nvram)
             gen_nvram_path=$(readlink -f $2)
             shift 2;;
-       --RRH)
-            RRH=1
-            echo_info "Will compile RRH"
-            shift;;
        -r | --3gpp-release)
             REL=$2
             echo_info "Setting release to: $REL"
@@ -371,7 +365,7 @@ function main() {
   echo_info "CMAKE_CMD=$CMAKE_CMD"
   
   #########################################################
-  # check validity of HW and TP parameters for RRH and eNB
+  # check validity of HW and TP parameters for eNB
   #########################################################
   # to be discussed
   
@@ -387,15 +381,6 @@ function main() {
       fi
   fi
   
-  if [ "$RRH" = "1" ] ; then
-      if [ "$TP" = "None" ] ; then
-	  echo_fatal "A transport protocol (e.g. -t ETHERNET) must be defined!"
-      fi
-      if [ "$HW" = "None" ] ; then
-	  echo_info "No radio head has been selected (HW set to $HW)"	
-      fi
-  fi
-
   echo_info "RF HW set to $HW" 
   #Now we set flags to enable deadline scheduler settings
   #By default: USRP: disable, 
@@ -793,36 +778,6 @@ function main() {
 	#  oaisim_mme $dbin/oaisim_mme.$REL
   fi
 
-  # RRH compilation
-  #####################
-  if [ "$RRH" = "1" ] ; then
-
-     rrh_exec=rrh_gw
-     rrh_build_dir=rrh_gw
-     
-     echo_info "Compiling $rrh_exec ..."
-    
-     [ "$CLEAN" = "1" ] && rm -rf $DIR/rrh_gw/build 
-     mkdir -p $DIR/$rrh_build_dir/build
-     cmake_file=$DIR/$rrh_build_dir/CMakeLists.txt
-     echo "cmake_minimum_required(VERSION 2.8)"   >   $cmake_file
-     echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )" >> $cmake_file
-     echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )"     >>  $cmake_file
-     echo "set ( ENABLE_ITTI False )"     		 >>  $cmake_file
-     echo "set ( RF_BOARD \"${HW}\")"               >>  $cmake_file
-     echo "set ( TRANSP_PRO \"${TP}\")"             >>  $cmake_file
-     echo 'set ( PACKAGE_NAME "\"rrh_gw\"")'        >>  $cmake_file
-     echo "set ( DEADLINE_SCHEDULER \"${DEADLINE_SCHEDULER_FLAG_USER}\" )"    >>$cmake_file
-     echo "set ( CPU_AFFINITY \"${CPU_AFFINITY_FLAG_USER}\" )"    >>$cmake_file
-     echo "set ( T_TRACER $T_TRACER )"            >>  $cmake_file
-     echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file    
-     cd $DIR/$rrh_build_dir/build
-     eval $CMAKE_CMD
-     compilations \
-	 rrh_gw rrh_gw \
-	 rrh_gw $dbin/rrh_gw
-
-  fi
   # Telnet server compilation
   #####################
   if [ "$BUILD_TELNETSRV" = "1" ] ; then
@@ -841,13 +796,9 @@ function main() {
   fi  
   # build RF device and transport protocol libraries
   #####################################
-  if [ "$eNB" = "1" -o "$UE" = "1" -o  "$RRH" = "1" ] ; then
-
   if [ "$eNB" = "1" -o "$UE" = "1" ] ; then
+
       build_dir=$lte_build_dir	  
-      else
-	  build_dir=$rrh_build_dir	 
-      fi
 
       # build RF device libraries
       if [ "$HW" != "None" ] ; then

cmake_targets/epc_test/CMakeLists.template

@@ -2,7 +2,6 @@ cmake_minimum_required(VERSION 2.8)
 
 set (  CMAKE_BUILD_TYPE "RelWithDebInfo" )
 set (  ASN_DEBUG False)
-set (  ADDR_CONF False )
 set (  DEBUG_OMG False )
 set (  DISABLE_XER_PRINT False )
 set (  DRIVER2013 True )
@@ -11,7 +10,6 @@ set (  ENABLE_FXP True )
 set (  ENABLE_ITTI True )
 set (  ENABLE_NAS_UE_LOGGING True )
 set (  ENABLE_NEW_MULTICAST True )
-set (  ENABLE_PGM_TRANSPORT True )
 set (  ENABLE_SECURITY True )
 set (  ENABLE_STANDALONE_EPC False)
 set (  ENABLE_USE_CPU_EXECUTION_TIME True )

cmake_targets/oaisim_build_oai/CMakeLists.template

 cmake_minimum_required(VERSION 2.8)
 
 set (  CMAKE_BUILD_TYPE "RelWithDebInfo" )
-set (  ADDR_CONF False )
 set (  DEBUG_OMG False )
 set (  DISABLE_XER_PRINT False )
 set (  DRIVER2013 True )
@@ -9,7 +8,6 @@ set (  ENABLE_FXP True )
 set (  ENABLE_ITTI True )
 set (  ENABLE_NAS_UE_LOGGING True )
 set (  ENABLE_NEW_MULTICAST True )
-set (  ENABLE_PGM_TRANSPORT True )
 set (  ENABLE_RAL False )
 set (  ENABLE_SECURITY True )
 set (  ENABLE_STANDALONE_EPC False)

cmake_targets/oaisim_mme_build_oai/CMakeLists.template

 cmake_minimum_required(VERSION 2.8)
 
 set (  CMAKE_BUILD_TYPE "RelWithDebInfo" )
-set (  ADDR_CONF False )
 set (  DEBUG_OMG False )
 set (  DISABLE_XER_PRINT False )
 set (  DRIVER2013 False )
@@ -9,7 +8,6 @@ set (  ENABLE_FXP False )
 set (  ENABLE_ITTI True )
 set (  ENABLE_NAS_UE_LOGGING False )
 set (  ENABLE_NEW_MULTICAST False )
-set (  ENABLE_PGM_TRANSPORT False )
 set (  ENABLE_RAL False )
 set (  ENABLE_SECURITY False )
 set (  ENABLE_STANDALONE_EPC False )

cmake_targets/oaisim_noS1_build_oai/CMakeLists.template

 cmake_minimum_required(VERSION 2.8)
 
-set (  ADDR_CONF False )
 set (  DEBUG_OMG False )
 set (  DISABLE_XER_PRINT False )
 set (  DRIVER2013 True )
@@ -8,7 +7,6 @@ set (  ENABLE_FXP True )
 set (  ENABLE_ITTI True )
 set (  ENABLE_NAS_UE_LOGGING False )
 set (  ENABLE_NEW_MULTICAST True )
-set (  ENABLE_PGM_TRANSPORT True )
 set (  ENABLE_RAL False )
 set (  ENABLE_SECURITY False )
 set (  ENABLE_STANDALONE_EPC False)

cmake_targets/s1c_mme_test/CMakeLists.template

 cmake_minimum_required(VERSION 2.8)
 
 set (  CMAKE_BUILD_TYPE "RelWithDebInfo" )
-set (  ADDR_CONF False )
 set (  DEBUG_OMG False )
 set (  DISABLE_XER_PRINT False )
 set (  DRIVER2013 True )
@@ -10,7 +9,6 @@ set (  ENABLE_ITTI True )
 set (  ENABLE_NAS_UE_LOGGING True )
 set (  ENABLE_NEW_MULTICAST True )
 set (  ENABLE_PDCP_NETLINK_FIFO False )
-set (  ENABLE_PGM_TRANSPORT True )
 set (  ENABLE_RAL False )
 set (  ENABLE_SECURITY True )
 set (  ENABLE_STANDALONE_EPC False)

openair1/SIMULATION/ETH_TRANSPORT/bypass_session_layer.c

@@ -39,7 +39,6 @@
 #include "UTIL/LOG/log.h"
 
 #include "multicast_link.h"
-#include "pgm_link.h"
 
 char rx_bufferP[BYPASS_RX_BUFFER_SIZE];
 unsigned int num_bytesP = 0;
@@ -49,10 +48,6 @@ static unsigned int byte_tx_count;
 unsigned int Master_list_rx;
 static uint64_t seq_num_tx = 0;
 
-#if defined(ENABLE_PGM_TRANSPORT)
-extern unsigned int pgm_would_block;
-#endif
-
 mapping transport_names[] = {
   {"WAIT PM TRANSPORT INFO", EMU_TRANSPORT_INFO_WAIT_PM},
   {"WAIT SM TRANSPORT INFO", EMU_TRANSPORT_INFO_WAIT_SM},
@@ -60,9 +55,6 @@ mapping transport_names[] = {
   {"ENB_TRANSPORT INFO", EMU_TRANSPORT_INFO_ENB},
   {"UE TRANSPORT INFO", EMU_TRANSPORT_INFO_UE},
   {"RELEASE TRANSPORT INFO", EMU_TRANSPORT_INFO_RELEASE},
-#if defined(ENABLE_PGM_TRANSPORT)
-  {"NACK TRANSPORT INFO", EMU_TRANSPORT_NACK},
-#endif
   {NULL, -1}
 };
 
@@ -77,9 +69,6 @@ void init_bypass (void)
   pthread_mutex_init (&emul_low_mutex, NULL);
   pthread_cond_init (&emul_low_cond, NULL);
   emul_low_mutex_var = 1;
-#endif
-#if defined(ENABLE_PGM_TRANSPORT)
-  pgm_oai_init(oai_emulation.info.multicast_ifname);
 #endif
   bypass_init (emul_tx_handler, emul_rx_handler);
 }
@@ -318,20 +307,12 @@ int bypass_rx_data(unsigned int frame, unsigned int last_slot,
         frame, next_slot, is_master);
 
 #if defined(ENABLE_NEW_MULTICAST)
-# if defined(ENABLE_PGM_TRANSPORT)
-  num_bytesP = pgm_recv_msg(oai_emulation.info.multicast_group,
-                            (uint8_t *)&rx_bufferP[0], sizeof(rx_bufferP),
-                            frame, next_slot);
-
-  DevCheck(num_bytesP > 0, num_bytesP, 0, 0);
-# else
 
   if (multicast_link_read_data_from_sock(is_master) == 1) {
     /* We got a timeout */
     return -1;
   }
 
-# endif
 #else
   pthread_mutex_lock(&emul_low_mutex);
 
@@ -359,10 +340,6 @@ int bypass_rx_data(unsigned int frame, unsigned int last_slot,
           num_bytesP, map_int_to_str(transport_names, messg->Message_type),
           messg->master_id,
           messg->seq_num);
-#if defined(ENABLE_PGM_TRANSPORT)
-
-    if (messg->Message_type != EMU_TRANSPORT_NACK)
-#endif
       DevCheck4((messg->frame == frame) && (messg->subframe == (next_slot>>1)),
                 messg->frame, frame, messg->subframe, next_slot>>1);
 
@@ -405,20 +382,6 @@ int bypass_rx_data(unsigned int frame, unsigned int last_slot,
       Master_list_rx = oai_emulation.info.master_list;
       LOG_E(EMU, "RX EMU_TRANSPORT_INFO_RELEASE\n");
       break;
-#if defined(ENABLE_PGM_TRANSPORT)
-
-    case EMU_TRANSPORT_NACK:
-      if (messg->failing_master_id == oai_emulation.info.master_id) {
-        /* We simply re-send the last message */
-        pgm_link_send_msg(oai_emulation.info.multicast_group,
-                          (uint8_t *)bypass_tx_buffer, byte_tx_count);
-      } else {
-        /* Sleep awhile till other peers have recovered data */
-        usleep(500);
-      }
-
-      break;
-#endif
 
     default:
       LOG_E(EMU, "[MAC][BYPASS] ERROR RX UNKNOWN MESSAGE\n");
@@ -483,13 +446,6 @@ void  bypass_signal_mac_phy(unsigned int frame, unsigned int last_slot,
   }
 }
 
-#if defined(ENABLE_PGM_TRANSPORT)
-void bypass_tx_nack(unsigned int frame, unsigned int next_slot)
-{
-  bypass_tx_data(NACK_TRANSPORT, frame, next_slot);
-}
-#endif
-
 /***************************************************************************/
 void bypass_tx_data(emu_transport_info_t Type, unsigned int frame, unsigned int next_slot)
 {
@@ -519,26 +475,6 @@ void bypass_tx_data(emu_transport_info_t Type, unsigned int frame, unsigned int
   byte_tx_count = sizeof (bypass_msg_header_t) + sizeof (
                     bypass_proto2multicast_header_t);
 
-#if defined(ENABLE_PGM_TRANSPORT)
-
-  if (Type == NACK_TRANSPORT) {
-    int i;
-    messg->Message_type = EMU_TRANSPORT_NACK;
-
-    for (i = 0; i < oai_emulation.info.nb_master; i++) {
-      /* Skip our id */
-      if (i == oai_emulation.info.master_id)
-        continue;
-
-      if ((Master_list_rx & (1 << i)) == 0) {
-        messg->failing_master_id = i;
-        break;
-      }
-    }
-
-    LOG_T(EMU,"[TX_DATA] NACK TRANSPORT\n");
-  } else
-#endif
     if (Type == WAIT_PM_TRANSPORT) {
       messg->Message_type = EMU_TRANSPORT_INFO_WAIT_PM;
       LOG_T(EMU,"[TX_DATA] WAIT SYNC PM TRANSPORT\n");
@@ -630,13 +566,8 @@ void bypass_tx_data(emu_transport_info_t Type, unsigned int frame, unsigned int
   ((bypass_proto2multicast_header_t *) bypass_tx_buffer)->size = byte_tx_count -
       sizeof (bypass_proto2multicast_header_t);
 
-#if defined(ENABLE_PGM_TRANSPORT)
-  pgm_link_send_msg(oai_emulation.info.multicast_group,
-                    (uint8_t *)bypass_tx_buffer, byte_tx_count);
-#else
   multicast_link_write_sock(oai_emulation.info.multicast_group,
                             bypass_tx_buffer, byte_tx_count);
-#endif
 
   LOG_D(EMU, "Frame %d, subframe %d (%d): Sent %d bytes [%s] with master_id %d and seq %"PRIuMAX"\n",
         frame, next_slot>>1, next_slot,byte_tx_count, map_int_to_str(transport_names, Type),

openair1/SIMULATION/ETH_TRANSPORT/defs.h

@@ -41,9 +41,6 @@ typedef enum emu_transport_info_e {
   EMU_TRANSPORT_INFO_ENB,
   EMU_TRANSPORT_INFO_UE,
   EMU_TRANSPORT_INFO_RELEASE
-#if defined(ENABLE_PGM_TRANSPORT)
-  ,EMU_TRANSPORT_NACK
-#endif
 } emu_transport_info_t;
 
 #define WAIT_PM_TRANSPORT 1
@@ -52,9 +49,6 @@ typedef enum emu_transport_info_e {
 #define ENB_TRANSPORT 4
 #define UE_TRANSPORT 5
 #define RELEASE_TRANSPORT 6
-#if defined(ENABLE_PGM_TRANSPORT)
-# define NACK_TRANSPORT 7
-#endif
 
 #define WAIT_SYNC_TRANSPORT 1
 #define SYNCED_TRANSPORT 2

openair1/SIMULATION/ETH_TRANSPORT/emu_transport.c

@@ -40,49 +40,17 @@
 #include "UTIL/LOG/log.h"
 #include "UTIL/LOG/vcd_signal_dumper.h"
 
-#include "pgm_link.h"
-
 extern unsigned int Master_list_rx;
 
 extern unsigned char NB_INST;
 //#define DEBUG_CONTROL 1
 //#define DEBUG_EMU   1
 
-#if defined(ENABLE_PGM_TRANSPORT)
-extern unsigned int pgm_would_block;
-#endif
-
 void emu_transport_sync(void)
 {
   LOG_D(EMU, "Entering EMU transport SYNC is primary master %d\n",
         oai_emulation.info.is_primary_master);
 
-#if defined(ENABLE_PGM_TRANSPORT)
-
-  if (oai_emulation.info.is_primary_master == 0) {
-    bypass_tx_data(WAIT_SM_TRANSPORT,0,0);
-    // just wait to recieve the  master 0 msg
-    Master_list_rx = oai_emulation.info.master_list - 1;
-    bypass_rx_data(0,0,0,1);
-  } else {
-    bypass_rx_data(0,0,0,0);
-    bypass_tx_data(WAIT_PM_TRANSPORT,0,0);
-  }
-
-  if (oai_emulation.info.master_list != 0) {
-    bypass_tx_data(SYNC_TRANSPORT,0,0);
-    bypass_rx_data(0,0,0,0);
-
-    // i received the sync from all secondary masters
-    if (emu_rx_status == SYNCED_TRANSPORT) {
-      emu_tx_status = SYNCED_TRANSPORT;
-    }
-
-    LOG_D(EMU,"TX secondary master SYNC_TRANSPORT state \n");
-  }
-
-#else
-
   if (oai_emulation.info.is_primary_master == 0) {
 retry:
     bypass_tx_data(WAIT_SM_TRANSPORT,0,0);
@@ -115,8 +83,6 @@ retry2:
     LOG_D(EMU,"TX secondary master SYNC_TRANSPORT state \n");
   }
 
-#endif
-
   LOG_D(EMU, "Leaving EMU transport SYNC is primary master %d\n",
         oai_emulation.info.is_primary_master);
 }
@@ -154,9 +120,6 @@ void emu_transport(unsigned int frame, unsigned int last_slot,
     }
   }
 
-#if defined(ENABLE_PGM_TRANSPORT)
-  pgm_would_block = 0;
-#endif
   VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(
     VCD_SIGNAL_DUMPER_FUNCTIONS_EMU_TRANSPORT, VCD_FUNCTION_OUT);
 }

openair1/SIMULATION/ETH_TRANSPORT/multicast_link.c

@@ -314,9 +314,7 @@ void multicast_link_start(void (*rx_handlerP) (unsigned int, char *),
   LOG_I(EMU, "[MULTICAST] LINK START on interface=%s for group=%d: handler=%p\n",
         (multicast_if == NULL) ? "not specified" : multicast_if, multicast_group,
         rx_handler);
-#if !defined(ENABLE_PGM_TRANSPORT)
   multicast_link_init ();
-#endif
 #if ! defined(ENABLE_NEW_MULTICAST)
   LOG_D(EMU, "[MULTICAST] multicast link start thread\n");
 

openair1/SIMULATION/ETH_TRANSPORT/pgm_link.h

-/*
- * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The OpenAirInterface Software Alliance licenses this file to You under
- * the OAI Public License, Version 1.1  (the "License"); you may not use this file
- * except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.openairinterface.org/?page_id=698
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *-------------------------------------------------------------------------------
- * For more information about the OpenAirInterface (OAI) Software Alliance:
- *      contact@openairinterface.org
- */
-
-#ifndef PGM_LINK_H_
-#define PGM_LINK_H_
-
-/* Define prototypes only if enabled */
-#if defined(ENABLE_PGM_TRANSPORT)
-void bypass_tx_nack(unsigned int frame, unsigned int next_slot);
-
-int pgm_oai_init(char *if_name);
-
-int pgm_recv_msg(int group, uint8_t *buffer, uint32_t length,
-                 unsigned int frame, unsigned int next_slot);
-
-int pgm_link_send_msg(int group, uint8_t *data, uint32_t len);
-
-#endif
-
-#endif /* PGM_LINK_H_ */

targets/RT/USER/rrh.gtkw

-[*]
-[*] GTKWave Analyzer v3.3.58 (w)1999-2014 BSI
-[*] Fri Jan 29 16:34:46 2016
-[*]
-[dumpfile] "/tmp/openair_dump_rrh.vcd"
-[dumpfile_mtime] "Fri Jan 29 16:20:55 2016"
-[dumpfile_size] 224259458
-[savefile] "/home/guepe/openairinterface5g_rrh/openairinterface5g/targets/RT/USER/rrh.gtkw"
-[timestart] 31315875900
-[size] 1004 1028
-[pos] 926 -1
-*-17.429794 31316090054 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
-[sst_width] 224
-[signals_width] 261
-[sst_expanded] 1
-[sst_vpaned_height] 278
-@24
-[color] 1
-variables.hw_frame_rx[63:0]
-[color] 1
-variables.hw_subframe_rx[63:0]
-@28
-[color] 1
-functions.eNB_rx
-functions.eNB_rx_sleep
-[color] 3
-functions.trx_read_rf
-[color] 7
-functions.trx_write
-@c00024
-variables.rxcnt[63:0]
-@28
-(0)variables.rxcnt[63:0]
-(1)variables.rxcnt[63:0]
-(2)variables.rxcnt[63:0]
-(3)variables.rxcnt[63:0]
-(4)variables.rxcnt[63:0]
-(5)variables.rxcnt[63:0]
-(6)variables.rxcnt[63:0]
-(7)variables.rxcnt[63:0]
-(8)variables.rxcnt[63:0]
-(9)variables.rxcnt[63:0]
-(10)variables.rxcnt[63:0]
-(11)variables.rxcnt[63:0]
-(12)variables.rxcnt[63:0]
-(13)variables.rxcnt[63:0]
-(14)variables.rxcnt[63:0]
-(15)variables.rxcnt[63:0]
-(16)variables.rxcnt[63:0]
-(17)variables.rxcnt[63:0]
-(18)variables.rxcnt[63:0]
-(19)variables.rxcnt[63:0]
-(20)variables.rxcnt[63:0]
-(21)variables.rxcnt[63:0]
-(22)variables.rxcnt[63:0]
-(23)variables.rxcnt[63:0]
-(24)variables.rxcnt[63:0]
-(25)variables.rxcnt[63:0]
-(26)variables.rxcnt[63:0]
-(27)variables.rxcnt[63:0]
-(28)variables.rxcnt[63:0]
-(29)variables.rxcnt[63:0]
-(30)variables.rxcnt[63:0]
-(31)variables.rxcnt[63:0]
-(32)variables.rxcnt[63:0]
-(33)variables.rxcnt[63:0]
-(34)variables.rxcnt[63:0]
-(35)variables.rxcnt[63:0]
-(36)variables.rxcnt[63:0]
-(37)variables.rxcnt[63:0]
-(38)variables.rxcnt[63:0]
-(39)variables.rxcnt[63:0]
-(40)variables.rxcnt[63:0]
-(41)variables.rxcnt[63:0]
-(42)variables.rxcnt[63:0]
-(43)variables.rxcnt[63:0]
-(44)variables.rxcnt[63:0]
-(45)variables.rxcnt[63:0]
-(46)variables.rxcnt[63:0]
-(47)variables.rxcnt[63:0]
-(48)variables.rxcnt[63:0]
-(49)variables.rxcnt[63:0]
-(50)variables.rxcnt[63:0]
-(51)variables.rxcnt[63:0]
-(52)variables.rxcnt[63:0]
-(53)variables.rxcnt[63:0]
-(54)variables.rxcnt[63:0]
-(55)variables.rxcnt[63:0]
-(56)variables.rxcnt[63:0]
-(57)variables.rxcnt[63:0]
-(58)variables.rxcnt[63:0]
-(59)variables.rxcnt[63:0]
-(60)variables.rxcnt[63:0]
-(61)variables.rxcnt[63:0]
-(62)variables.rxcnt[63:0]
-(63)variables.rxcnt[63:0]
-@1401200
--group_end
-@24
-variables.pck_rx[63:0]
-variables.rx_ts[63:0]
-@c00024
-variables.tx_seq_num[63:0]
-@28
-(0)variables.tx_seq_num[63:0]
-(1)variables.tx_seq_num[63:0]
-(2)variables.tx_seq_num[63:0]
-(3)variables.tx_seq_num[63:0]
-(4)variables.tx_seq_num[63:0]
-(5)variables.tx_seq_num[63:0]
-(6)variables.tx_seq_num[63:0]
-(7)variables.tx_seq_num[63:0]
-(8)variables.tx_seq_num[63:0]
-(9)variables.tx_seq_num[63:0]
-(10)variables.tx_seq_num[63:0]
-(11)variables.tx_seq_num[63:0]
-(12)variables.tx_seq_num[63:0]
-(13)variables.tx_seq_num[63:0]
-(14)variables.tx_seq_num[63:0]
-(15)variables.tx_seq_num[63:0]
-(16)variables.tx_seq_num[63:0]
-(17)variables.tx_seq_num[63:0]
-(18)variables.tx_seq_num[63:0]
-(19)variables.tx_seq_num[63:0]
-(20)variables.tx_seq_num[63:0]
-(21)variables.tx_seq_num[63:0]
-(22)variables.tx_seq_num[63:0]
-(23)variables.tx_seq_num[63:0]
-(24)variables.tx_seq_num[63:0]
-(25)variables.tx_seq_num[63:0]
-(26)variables.tx_seq_num[63:0]
-(27)variables.tx_seq_num[63:0]
-(28)variables.tx_seq_num[63:0]
-(29)variables.tx_seq_num[63:0]
-(30)variables.tx_seq_num[63:0]
-(31)variables.tx_seq_num[63:0]
-(32)variables.tx_seq_num[63:0]
-(33)variables.tx_seq_num[63:0]
-(34)variables.tx_seq_num[63:0]
-(35)variables.tx_seq_num[63:0]
-(36)variables.tx_seq_num[63:0]
-(37)variables.tx_seq_num[63:0]
-(38)variables.tx_seq_num[63:0]
-(39)variables.tx_seq_num[63:0]
-(40)variables.tx_seq_num[63:0]
-(41)variables.tx_seq_num[63:0]
-(42)variables.tx_seq_num[63:0]
-(43)variables.tx_seq_num[63:0]
-(44)variables.tx_seq_num[63:0]
-(45)variables.tx_seq_num[63:0]
-(46)variables.tx_seq_num[63:0]
-(47)variables.tx_seq_num[63:0]
-(48)variables.tx_seq_num[63:0]
-(49)variables.tx_seq_num[63:0]
-(50)variables.tx_seq_num[63:0]
-(51)variables.tx_seq_num[63:0]
-(52)variables.tx_seq_num[63:0]
-(53)variables.tx_seq_num[63:0]
-(54)variables.tx_seq_num[63:0]
-(55)variables.tx_seq_num[63:0]
-(56)variables.tx_seq_num[63:0]
-(57)variables.tx_seq_num[63:0]
-(58)variables.tx_seq_num[63:0]
-(59)variables.tx_seq_num[63:0]
-(60)variables.tx_seq_num[63:0]
-(61)variables.tx_seq_num[63:0]
-(62)variables.tx_seq_num[63:0]
-(63)variables.tx_seq_num[63:0]
-@1401200
--group_end
-@24
-variables.hw_frame[63:0]
-variables.hw_subframe[63:0]
-@28
-[color] 1
-functions.eNB_tx
-functions.eNB_tx_sleep
-[color] 7
-functions.trx_read
-[color] 3
-functions.trx_write_rf
-@24
-variables.txcnt[63:0]
-variables.pck_tx[63:0]
-variables.tx_ts[63:0]
-@25
-variables.rx_seq_num_prv[63:0]
-@24
-variables.rx_seq_num[63:0]
-variables.hw_cnt_rx[63:0]
-variables.lhw_cnt_rx[63:0]
-[color] 3
-variables.cnt[63:0]
-[pattern_trace] 1
-[pattern_trace] 0

targets/RT/USER/rrh_gw.h

-/*
- * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The OpenAirInterface Software Alliance licenses this file to You under
- * the OAI Public License, Version 1.1  (the "License"); you may not use this file
- * except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.openairinterface.org/?page_id=698
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *-------------------------------------------------------------------------------
- * For more information about the OpenAirInterface (OAI) Software Alliance:
- *      contact@openairinterface.org
- */
-
-/*! \file rrh_gw.h
- * \brief header file for remote radio head gateway (RRH_gw) module 
- * \author Navid Nikaein,  Katerina Trilyraki, Raymond Knopp
- * \date 2015
- * \version 0.1
- * \company Eurecom
- * \maintainer:  navid.nikaein@eurecom.fr
- * \note
- * \warning very experimental 
- */
-
-#ifndef RRH_GW_H_
-#define RRH_GW_H_
-
-#include "ethernet_lib.h"
-#include "vcd_signal_dumper.h"
-#include "assertions.h"
-
-#define DEFAULT_PERIOD_NS 200000 /* default value is calculated for 25 PRB */
-#define RRH_UE_PORT 51000
-#define RRH_UE_DEST_IP "127.0.0.1"
-
-/*! \brief RRH supports two types of modules: eNB and UE
-	   each module is associated with an ethernet device (device of ETH_IF) 
-	   and optionally with a RF device (device type can be USRP_B200/USRP_X300/BLADERF_IF/EXMIMO_IF/NONE_IF)
-           UE modules will always have RF device type NONE_IF */
-typedef struct {
-/*! \brief module id */
-  uint8_t id;
-/*! \brief! loopback flag */
-uint8_t loopback;
-/*! \brief measurement flag */
-uint8_t measurements;
-/*! \brief module's ethernet device */
-openair0_device eth_dev;
-/*! \brief pointer to RF module's device (pointer->since it's optional) */
-openair0_device *devs;
-}rrh_module_t;
-
-/*! \fn void timer_signal_handler(int sig)
- * \brief this function
- * \param[in] signal type
- * \return none
- * \note
- * @ingroup  _oai
-*/
-void timer_signal_handler(int);
-
-/*! \fn void *timer_proc(void *arg)
- * \brief this function
- * \param[in]
- * \param[out]
- * \return
- * \note
- * @ingroup  _oai
- */
-void *timer_proc(void *);
-
-/*! \fn void config_BBU_mod( rrh_module_t *mod_enb, uint8_t RT_flag,uint8_t NRT_flag)
- * \brief receive and apply configuration to modules' optional device
- * \param[in]  *mod_enb pointer to module 
- * \param[in]   RT_flag real time flag 
- * \return none
- * \note
- * @ingroup  _oai
- */
-void config_BBU_mod( rrh_module_t *mod_enb, uint8_t RT_flag, uint8_t NRT_flag);
-
-/*! \fn void  config_UE_mod( rrh_module_t *dev_ue, uint8_t RT_flag,uint8_t NRT_flag)
- * \brief this function
- * \param[in] *mod_ue pointer to module 
- * \param[in]
- * \return none
- * \note
- * @ingroup  _oai
- */
-void config_UE_mod( rrh_module_t *dev_ue, uint8_t RT_flag, uint8_t NRT_flag);
-
-
-
-void signal_handler(int sig);
-
-#endif

targets/RT/USER/rrh_gw_externs.h

-/*
- * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The OpenAirInterface Software Alliance licenses this file to You under
- * the OAI Public License, Version 1.1  (the "License"); you may not use this file
- * except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.openairinterface.org/?page_id=698
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *-------------------------------------------------------------------------------
- * For more information about the OpenAirInterface (OAI) Software Alliance:
- *      contact@openairinterface.org
- */
-
-/*! \file rrh_gw_extern.h
- * \brief rrh gatewy external vars
- * \author Navid Nikaein,  Katerina Trilyraki, Raymond Knopp
- * \date 2015
- * \version 0.1
- * \company Eurecom
- * \maintainer:  navid.nikaein@eurecom.fr
- * \note
- * \warning very experimental 
- */
-
-#ifndef RRH_GW_EXTERNS_H_
-#define RRH_GW_EXTERNS_H_
-extern char   rf_config_file[1024];
-
-extern openair0_timestamp 	timestamp_UE_tx[4] ,timestamp_UE_rx[4] ,timestamp_eNB_rx[4],timestamp_eNB_tx[4];
-extern openair0_vtimestamp 	hw_counter;
-extern int32_t			UE_tx_started,UE_rx_started,eNB_rx_started ,eNB_tx_started;
-extern int32_t			nsamps_UE[4],nsamps_eNB[4];
-extern int32_t			overflow_rx_buffer_eNB[4],overflow_rx_buffer_UE[4];
-extern uint8_t			rrh_exit;
-extern int32_t			**rx_buffer_eNB, **rx_buffer_UE;
-extern unsigned int	        rt_period;
-extern pthread_mutex_t          timer_mutex;
-
-
-#endif 

targets/SIMU/USER/Makefile

@@ -263,7 +263,7 @@ endif
 # Check if libpgm is installed and use it if found instead of the unreliable
 # multicast
 ifeq ($(PGM_FOUND), 1)
-CFLAGS		+= $(PGM_CFLAGS) -DENABLE_PGM_TRANSPORT
+CFLAGS		+= $(PGM_CFLAGS)
 LIBS		+= $(PGM_LIBS)
 endif