///Cyclic prefix type [TS38.211 sec 4.2], 0: Normal; 1: Extended
uint8_tCyclicPrefix;
///Starting OFDM symbol for the CORESET, Value: 0->13
uint8_tStartSymbolIndex;
///Contiguous time duration of the CORESET in number of symbols. Corresponds to L1 parameter 𝑁𝑠𝑦𝑚𝑏_𝐶𝑂𝑅𝐸𝑆𝐸𝑇 [TS38.211 sec 7.3.2.2] Value: 1,2,3
uint8_tDurationSymbols;
///Frequency domain resources. This is a bitmap defining non-overlapping groups of 6 PRBs in ascending order. [TS38.213 10.1]. Also, corresponds to L1 parameter CORE SET RB N [TS38.211 sec 7.3.2.2] Bitmap of uint8 array. 45 bits.
///The number of REGs in a bundle. Must be 6 for cceRegMappingType = nonInterleaved. For cceRegMappingType = interleaved, must belong to {2,6} if duration = 1,2 and must belong to {3,6} if duration = 3. Corresponds to parameter L. [TS38.211 sec 7.3.2.2] Value: 2,3,6
uint8_tRegBundleSize;
///The interleaver size. For interleaved mapping belongs to {2,3,6} and for non-interleaved mapping is NA. Corresponds to parameter R. [TS38.211 sec 7.3.2.2] Value: 2,3,6 CoreSetType
uint8_tInterleaverSize;
///[TS38.211 sec 7.3.2.2 and sec 7.4.1.3.2] 0: CORESET is configured by the PBCH or SIB1 (subcarrier 0 of CRB0 for DMRS mapping) 1: otherwise (subcarrier 0 of CORESET)
uint8_tCoreSetType;
///[TS38.211 sec 7.3.2.2] Not applicable for non-interleaved mapping. For interleaved mapping and a PDCCH transmitted in a CORESET configured by the PBCH or SIB1 this should be set to phy cell ID. Value: 10 bits Otherwise, for interleaved mapping this is set to 0-> max num of PRBs. Value 0-> 275
uint16_tShiftIndex;
///Granularity of precoding [TS38.211 sec 7.3.2.2] Field Type Description 0: sameAsRegBundle 1: allContiguousRBs
uint8_tprecoderGranularity;
///Number of DCIs in this CORESET.Value: 0->MaxDciPerSlot
uint16_tnumDlDci;
///The RNTI used for identifying the UE when receiving the PDU Value: 1 -> 65535.
uint16_tRNTI[MAX_DCI_CORESET];
///For a UE-specific search space it equals the higher-layer parameter PDCCH-DMRSScrambling-ID if configured, otherwise it should be set to the phy cell ID. [TS38.211, sec 7.3.2.3] Value: 0->65535
uint16_tScramblingId[MAX_DCI_CORESET];
///For a UE-specific search space where PDCCH-DMRSScrambling- ID is configured This param equals the CRNTI. Otherwise, it should be set to 0. [TS38.211, sec 7.3.2.3] Value: 0 -> 65535
uint16_tScramblingRNTI[MAX_DCI_CORESET];
///CCE start Index used to send the DCI Value: 0->135
uint8_tCceIndex[MAX_DCI_CORESET];
///Aggregation level used [TS38.211, sec 7.3.2.1] Value: 1,2,4,8,16
uint8_tAggregationLevel[MAX_DCI_CORESET];
///Precoding and Beamforming structure See Table 3-43
///PDCCH power value used for PDCCH Format 1_0 with CRC scrambled by SI-RNTI, PI-RNTI or RA-RNTI. This is ratio of SSB/PBCH EPRE to PDCCH and PDCCH DMRS EPRE [TS38.213, sec 4.1] Value :0->17 Report title: 5G FAPI: PHY API Specification Issue date: 29 June 2019 Version: 222.10.17 68 Field Type Description representing -8 to 8 dB in 1dB steps
uint8_tbeta_PDCCH_1_0[MAX_DCI_CORESET];
///PDCCH power value used for all other PDCCH Formats. This is ratio of SSB/PBCH block EPRE to PDCCH and PDCCH DMRS EPRE [TS38.214, sec 4.1] Values: 0: -3dB,1: 0dB,2: 3dB,3: 6dB
uint8_tpowerControlOffsetSS[MAX_DCI_CORESET];
///The total DCI length (in bits) including padding bits [TS38.212 sec 7.3.1] Range 0->DCI_PAYLOAD_BTYE_LEN*8
uint16_tPayloadSizeBits[MAX_DCI_CORESET];
///DCI payload, where the actual size is defined by PayloadSizeBits. The bit order is as following bit0-bit7 are mapped to first byte of MSB - LSB
/// Number of code words for this RNTI (UE), Value: 1 -> 2
uint8_tNrOfCodewords;
/// Target coding rate [TS38.212 sec 5.4.2.1 and 38.214 sec 5.1.3.1]. This is the number of information bits per 1024 coded bits expressed in 0.1 bit units
/// dataScramblingIdentityPdsch [TS38.211, sec 7.3.1.1], It equals the higher-layer parameter Datascrambling-Identity if configured and the RNTI equals the C-RNTI, otherwise L2 needs to set it to physical cell id. Value: 0->65535
uint16_tdataScramblingId;
/// Number of layers [TS38.211, sec 7.3.1.3]. Value : 1->8
uint8_tnrOfLayers;
/// PDSCH transmission schemes [TS38.214, sec5.1.1] 0: Up to 8 transmission layers
uint8_ttransmissionScheme;
/// Reference point for PDSCH DMRS "k" - used for tone mapping [TS38.211, sec 7.4.1.1.2] Resource block bundles [TS38.211, sec 7.3.1.6] Value: 0 -> 1 If 0, the 0 reference point for PDSCH DMRS is at Point A [TS38.211 sec 4.4.4.2]. Resource block bundles generated per sub-bullets 2 and 3 in [TS38.211, sec 7.3.1.6]. For sub-bullet 2, the start of bandwidth part must be set to the start of actual bandwidth part +NstartCORESET and the bandwidth of the bandwidth part must be set to the bandwidth of the initial bandwidth part. If 1, the DMRS reference point is at the lowest VRB/PRB of the allocation. Resource block bundles generated per sub-bullets 1 [TS38.211, sec 7.3.1.6]
uint8_trefPoint;
// DMRS [TS38.211 sec 7.4.1.1]
/// DMRS symbol positions [TS38.211, sec 7.4.1.1.2 and Tables 7.4.1.1.2-3 and 7.4.1.1.2-4] Bitmap occupying the 14 LSBs with: bit 0: first symbol and for each bit 0: no DMRS 1: DMRS
uint16_tdlDmrsSymbPos;
/// DL DMRS config type [TS38.211, sec 7.4.1.1.2] 0: type 1, 1: type 2
uint8_tdmrsConfigType;
/// DL-DMRS-Scrambling-ID [TS38.211, sec 7.4.1.1.2 ] If provided by the higher-layer and the PDSCH is scheduled by PDCCH with CRC scrambled by CRNTI or CS-RNTI, otherwise, L2 should set this to physical cell id. Value: 0->65535
uint16_tdlDmrsScramblingId;
/// DMRS sequence initialization [TS38.211, sec 7.4.1.1.2]. Should match what is sent in DCI 1_1, otherwise set to 0. Value : 0->1
uint8_tSCID;
/// Number of DM-RS CDM groups without data [TS38.212 sec 7.3.1.2.2] [TS38.214 Table 4.1-1] it determines the ratio of PDSCH EPRE to DM-RS EPRE. Value: 1->3
uint8_tnumDmrsCdmGrpsNoData;
/// DMRS ports. [TS38.212 7.3.1.2.2] provides description between DCI 1-1 content and DMRS ports. Bitmap occupying the 11 LSBs with: bit 0: antenna port 1000 bit 11: antenna port 1011 and for each bit 0: DMRS port not used 1: DMRS port used
uint16_tdmrsPorts;
// Pdsch Allocation in frequency domain [TS38.214, sec 5.1.2.2]
/// Resource Allocation Type [TS38.214, sec 5.1.2.2] 0: Type 0, 1: Type 1
uint8_tresourceAlloc;
/// For resource alloc type 0. TS 38.212 V15.0.x, 7.3.1.2.2 bitmap of RBs, 273 rounded up to multiple of 32. This bitmap is in units of VRBs. LSB of byte 0 of the bitmap represents the first RB of the bwp
uint8_trbBitmap[36];
/// For resource allocation type 1. [TS38.214, sec 5.1.2.2.2] The starting resource block within the BWP for this PDSCH. Value: 0->274
uint16_trbStart;
/// For resource allocation type 1. [TS38.214, sec 5.1.2.2.2] The number of resource block within for this PDSCH. Value: 1->275
uint16_trbSize;
/// VRB-to-PRB-mapping [TS38.211, sec 7.3.1.6] 0: non-interleaved 1: interleaved with RB size 2 2: Interleaved with RB size 4
uint8_tVRBtoPRBMapping;
// Resource Allocation in time domain [TS38.214, sec 5.1.2.1]
/// Start symbol index of PDSCH mapping from the start of the slot, S. [TS38.214, Table 5.1.2.1-1] Value: 0->13
uint8_tStartSymbolIndex;
/// PDSCH duration in symbols, L [TS38.214, Table 5.1.2.1-1] Value: 1->14
uint8_tNrOfSymbols;
// PTRS [TS38.214, sec 5.1.6.3]
/// PT-RS antenna ports [TS38.214, sec 5.1.6.3] [TS38.211, table 7.4.1.2.2-1] Bitmap occupying the 6 LSBs with: bit 0: antenna port 1000 bit 5: antenna port 1005 and for each bit 0: PTRS port not used 1: PTRS port used
uint8_tPTRSPortIndex;
/// PT-RS time density [TS38.214, table 5.1.6.3-1] 0: 1 1: 2 2: 4
uint8_tPTRSTimeDensity;
/// PT-RS frequency density [TS38.214, table 5.1.6.3-2] 0: 2 1: 4
uint8_tPTRSFreqDensity;
/// PT-RS resource element offset [TS38.211, table 7.4.1.2.2-1] Value: 0->3
uint8_tPTRSReOffset;
/// PT-RS-to-PDSCH EPRE ratio [TS38.214, table 4.1-2] Value :0->3
uint16_tnum_prgs;/*Number of PRGs spanning this allocation.
Value : 1->275 */
uint16_tprg_size;/*Size in RBs of a precoding resource block group (PRG) – to which same precoding and digital beamforming gets applied. Value: 1->275 */
uint16_t num_prgs;//Number of PRGs spanning this allocation. Value : 1->275
uint16_t prg_size;//Size in RBs of a precoding resource block group (PRG) – to which same precoding and digital beamforming gets applied. Value: 1->275
//watchout: dig_bf_interfaces here, in table 3-53 it's dig_bf_interface
uint8_t dig_bf_interfaces;//Number of STD ant ports (parallel streams) feeding into the digBF Value: 0->255
uint8_tcyclic_prefix;//Cyclic prefix type [TS38.211 sec 4.2] 0: Normal; 1: Extended
//Coreset [TS38.211 sec 7.3.2.2]
uint8_tstart_symbol_index;//Starting OFDM symbol for the CORESET Value: 0->13
uint8_tduration_symbols;/* Contiguous time duration of the CORESET in number of symbols. Corresponds to L1 parameter 𝑁𝑠𝑦𝑚𝑏 𝐶𝑂𝑅𝐸𝑆𝐸𝑇 [TS38.211 sec 7.3.2.2] Value: 1,2,3*/
uint8_tfreq_domain_resource[6];/* Frequency domain resources. This is a bitmap defining non-overlapping groups of 6 PRBs in ascending order. [TS38.213 10.1]. Also, corresponds to L1 parameter N^{CORESET}_{RB} [TS38.211 sec 7.3.2.2]
uint8_treg_bundle_size;/*The number of REGs in a bundle. Must be 6 for
cceRegMappingType = nonInterleaved. For cceRegMappingType = interleaved, must belong to {2,6} if duration = 1,2 and must belong to {3,6} if
duration = 3. Corresponds to parameter L. [TS38.211 sec 7.3.2.2] Value: 2,3,6 */
uint8_tinterleaver_size;//The interleaver size. For interleaved mapping belongs to {2,3,6} and for non-interleaved mapping is NA. Corresponds to parameter R. [TS38.211 sec 7.3.2.2] Value: 2,3,6
uint8_tcore_set_type;//[TS38.211 sec 7.3.2.2 and sec 7.4.1.3.2] 0: CORESET is configured by the PBCH or SIB1 (subcarrier 0 of CRB0 for DMRS mapping) 1: otherwise (subcarrier 0 of CORESET)
uint16_tshift_index;//[TS38.211 sec 7.3.2.2] Not applicable for non-interleaved mapping. For interleaved mapping and a PDCCH transmitted in a CORESET configured by the PBCH or SIB1 this should be set to phy cell ID. Value: 10 bits Otherwise, for interleaved mapping this is set to 0-> max num of PRBs. Value 0-> 275
uint8_tprecoder_granularity;//Granularity of precoding [TS38.211 sec 7.3.2.2] 0: sameAsRegBundle 1: allContiguousRBs
uint16_tnum_dl_dci;//Number of DCIs in this CORESET. Value: 0->MaxDciPerSlot
nfapi_nr_dl_dci_pdu_t*dl_dci_list;
}nfapi_nr_pdcch_pdu_t;
typedefstruct{
/// Number of PRGs spanning this allocation. Value : 1->275
uint16_tnumPRGs;
/// Size in RBs of a precoding resource block group (PRG) – to which same precoding and digital beamforming gets applied. Value: 1->275
uint16_tprgSize;
/// Number of STD ant ports (parallel streams) feeding into the digBF Value: 0->255
uint8_tdigBFInterfaces;
uint16_tPMIdx[275];
uint16_t*beamIdx[275];
}nr_beamforming_t;
#define MAX_DCI_CORESET 8
#define DCI_PAYLOAD_BYTE_LEN 8
typedefstruct{
///Bandwidth part size [TS38.213 sec12]. Number of contiguous PRBs allocated to the BWP,Value: 1->275
uint16_tBWPSize;
///bandwidth part start RB index from reference CRB, [TS38.213 sec 12], Value: 0->274
///Cyclic prefix type [TS38.211 sec 4.2], 0: Normal; 1: Extended
uint8_tCyclicPrefix;
///Starting OFDM symbol for the CORESET, Value: 0->13
uint8_tStartSymbolIndex;
///Contiguous time duration of the CORESET in number of symbols. Corresponds to L1 parameter 𝑁𝑠𝑦𝑚𝑏_𝐶𝑂𝑅𝐸𝑆𝐸𝑇 [TS38.211 sec 7.3.2.2] Value: 1,2,3
uint8_tDurationSymbols;
///Frequency domain resources. This is a bitmap defining non-overlapping groups of 6 PRBs in ascending order. [TS38.213 10.1]. Also, corresponds to L1 parameter CORE SET RB N [TS38.211 sec 7.3.2.2] Bitmap of uint8 array. 45 bits.
///The number of REGs in a bundle. Must be 6 for cceRegMappingType = nonInterleaved. For cceRegMappingType = interleaved, must belong to {2,6} if duration = 1,2 and must belong to {3,6} if duration = 3. Corresponds to parameter L. [TS38.211 sec 7.3.2.2] Value: 2,3,6
uint8_tRegBundleSize;
///The interleaver size. For interleaved mapping belongs to {2,3,6} and for non-interleaved mapping is NA. Corresponds to parameter R. [TS38.211 sec 7.3.2.2] Value: 2,3,6 CoreSetType
uint8_tInterleaverSize;
///[TS38.211 sec 7.3.2.2 and sec 7.4.1.3.2] 0: CORESET is configured by the PBCH or SIB1 (subcarrier 0 of CRB0 for DMRS mapping) 1: otherwise (subcarrier 0 of CORESET)
uint8_tCoreSetType;
///[TS38.211 sec 7.3.2.2] Not applicable for non-interleaved mapping. For interleaved mapping and a PDCCH transmitted in a CORESET configured by the PBCH or SIB1 this should be set to phy cell ID. Value: 10 bits Otherwise, for interleaved mapping this is set to 0-> max num of PRBs. Value 0-> 275
uint16_tShiftIndex;
///Granularity of precoding [TS38.211 sec 7.3.2.2] Field Type Description 0: sameAsRegBundle 1: allContiguousRBs
uint8_tprecoderGranularity;
///Number of DCIs in this CORESET.Value: 0->MaxDciPerSlot
uint16_tnumDlDci;
///The RNTI used for identifying the UE when receiving the PDU Value: 1 -> 65535.
uint16_tRNTI[MAX_DCI_CORESET];
///For a UE-specific search space it equals the higher-layer parameter PDCCH-DMRSScrambling-ID if configured, otherwise it should be set to the phy cell ID. [TS38.211, sec 7.3.2.3] Value: 0->65535
uint16_tScramblingId[MAX_DCI_CORESET];
///For a UE-specific search space where PDCCH-DMRSScrambling- ID is configured This param equals the CRNTI. Otherwise, it should be set to 0. [TS38.211, sec 7.3.2.3] Value: 0 -> 65535
uint16_tScramblingRNTI[MAX_DCI_CORESET];
///CCE start Index used to send the DCI Value: 0->135
uint8_tCceIndex[MAX_DCI_CORESET];
///Aggregation level used [TS38.211, sec 7.3.2.1] Value: 1,2,4,8,16
uint8_tAggregationLevel[MAX_DCI_CORESET];
///Precoding and Beamforming structure See Table 3-43
///PDCCH power value used for PDCCH Format 1_0 with CRC scrambled by SI-RNTI, PI-RNTI or RA-RNTI. This is ratio of SSB/PBCH EPRE to PDCCH and PDCCH DMRS EPRE [TS38.213, sec 4.1] Value :0->17 Report title: 5G FAPI: PHY API Specification Issue date: 29 June 2019 Version: 222.10.17 68 Field Type Description representing -8 to 8 dB in 1dB steps
uint8_tbeta_PDCCH_1_0[MAX_DCI_CORESET];
///PDCCH power value used for all other PDCCH Formats. This is ratio of SSB/PBCH block EPRE to PDCCH and PDCCH DMRS EPRE [TS38.214, sec 4.1] Values: 0: -3dB,1: 0dB,2: 3dB,3: 6dB
uint8_tpowerControlOffsetSS[MAX_DCI_CORESET];
///The total DCI length (in bits) including padding bits [TS38.212 sec 7.3.1] Range 0->DCI_PAYLOAD_BTYE_LEN*8
uint16_tPayloadSizeBits[MAX_DCI_CORESET];
///DCI payload, where the actual size is defined by PayloadSizeBits. The bit order is as following bit0-bit7 are mapped to first byte of MSB - LSB
/// Number of code words for this RNTI (UE), Value: 1 -> 2
uint8_tNrOfCodewords;
/// Target coding rate [TS38.212 sec 5.4.2.1 and 38.214 sec 5.1.3.1]. This is the number of information bits per 1024 coded bits expressed in 0.1 bit units
/// dataScramblingIdentityPdsch [TS38.211, sec 7.3.1.1], It equals the higher-layer parameter Datascrambling-Identity if configured and the RNTI equals the C-RNTI, otherwise L2 needs to set it to physical cell id. Value: 0->65535
uint16_tdataScramblingId;
/// Number of layers [TS38.211, sec 7.3.1.3]. Value : 1->8
uint8_tnrOfLayers;
/// PDSCH transmission schemes [TS38.214, sec5.1.1] 0: Up to 8 transmission layers
uint8_ttransmissionScheme;
/// Reference point for PDSCH DMRS "k" - used for tone mapping [TS38.211, sec 7.4.1.1.2] Resource block bundles [TS38.211, sec 7.3.1.6] Value: 0 -> 1 If 0, the 0 reference point for PDSCH DMRS is at Point A [TS38.211 sec 4.4.4.2]. Resource block bundles generated per sub-bullets 2 and 3 in [TS38.211, sec 7.3.1.6]. For sub-bullet 2, the start of bandwidth part must be set to the start of actual bandwidth part +NstartCORESET and the bandwidth of the bandwidth part must be set to the bandwidth of the initial bandwidth part. If 1, the DMRS reference point is at the lowest VRB/PRB of the allocation. Resource block bundles generated per sub-bullets 1 [TS38.211, sec 7.3.1.6]
uint8_trefPoint;
// DMRS [TS38.211 sec 7.4.1.1]
/// DMRS symbol positions [TS38.211, sec 7.4.1.1.2 and Tables 7.4.1.1.2-3 and 7.4.1.1.2-4] Bitmap occupying the 14 LSBs with: bit 0: first symbol and for each bit 0: no DMRS 1: DMRS
uint16_tdlDmrsSymbPos;
/// DL DMRS config type [TS38.211, sec 7.4.1.1.2] 0: type 1, 1: type 2
uint8_tdmrsConfigType;
/// DL-DMRS-Scrambling-ID [TS38.211, sec 7.4.1.1.2 ] If provided by the higher-layer and the PDSCH is scheduled by PDCCH with CRC scrambled by CRNTI or CS-RNTI, otherwise, L2 should set this to physical cell id. Value: 0->65535
uint16_tdlDmrsScramblingId;
/// DMRS sequence initialization [TS38.211, sec 7.4.1.1.2]. Should match what is sent in DCI 1_1, otherwise set to 0. Value : 0->1
uint8_tSCID;
/// Number of DM-RS CDM groups without data [TS38.212 sec 7.3.1.2.2] [TS38.214 Table 4.1-1] it determines the ratio of PDSCH EPRE to DM-RS EPRE. Value: 1->3
uint8_tnumDmrsCdmGrpsNoData;
/// DMRS ports. [TS38.212 7.3.1.2.2] provides description between DCI 1-1 content and DMRS ports. Bitmap occupying the 11 LSBs with: bit 0: antenna port 1000 bit 11: antenna port 1011 and for each bit 0: DMRS port not used 1: DMRS port used
uint16_tdmrsPorts;
// Pdsch Allocation in frequency domain [TS38.214, sec 5.1.2.2]
/// Resource Allocation Type [TS38.214, sec 5.1.2.2] 0: Type 0, 1: Type 1
uint8_tresourceAlloc;
/// For resource alloc type 0. TS 38.212 V15.0.x, 7.3.1.2.2 bitmap of RBs, 273 rounded up to multiple of 32. This bitmap is in units of VRBs. LSB of byte 0 of the bitmap represents the first RB of the bwp
uint8_trbBitmap[36];
/// For resource allocation type 1. [TS38.214, sec 5.1.2.2.2] The starting resource block within the BWP for this PDSCH. Value: 0->274
uint16_trbStart;
/// For resource allocation type 1. [TS38.214, sec 5.1.2.2.2] The number of resource block within for this PDSCH. Value: 1->275
uint16_trbSize;
/// VRB-to-PRB-mapping [TS38.211, sec 7.3.1.6] 0: non-interleaved 1: interleaved with RB size 2 2: Interleaved with RB size 4
uint8_tVRBtoPRBMapping;
// Resource Allocation in time domain [TS38.214, sec 5.1.2.1]
/// Start symbol index of PDSCH mapping from the start of the slot, S. [TS38.214, Table 5.1.2.1-1] Value: 0->13
uint8_tStartSymbolIndex;
/// PDSCH duration in symbols, L [TS38.214, Table 5.1.2.1-1] Value: 1->14
uint8_tNrOfSymbols;
// PTRS [TS38.214, sec 5.1.6.3]
/// PT-RS antenna ports [TS38.214, sec 5.1.6.3] [TS38.211, table 7.4.1.2.2-1] Bitmap occupying the 6 LSBs with: bit 0: antenna port 1000 bit 5: antenna port 1005 and for each bit 0: PTRS port not used 1: PTRS port used
uint8_tPTRSPortIndex;
/// PT-RS time density [TS38.214, table 5.1.6.3-1] 0: 1 1: 2 2: 4
uint8_tPTRSTimeDensity;
/// PT-RS frequency density [TS38.214, table 5.1.6.3-2] 0: 2 1: 4
uint8_tPTRSFreqDensity;
/// PT-RS resource element offset [TS38.211, table 7.4.1.2.2-1] Value: 0->3
uint8_tPTRSReOffset;
/// PT-RS-to-PDSCH EPRE ratio [TS38.214, table 4.1-2] Value :0->3
uint8_trow;//Row entry into the CSI Resource location table. [TS38.211, sec 7.4.1.5.3 and table 7.4.1.5.3-1] Value: 1-18
uint16_tfreq_domain;//Value: Up to the 12 LSBs, actual size is determined by the Row parameter
uint8_tsymb_l0;//The time domain location l0 and firstOFDMSymbolInTimeDomain Value: 0->13
uint8_tsymb_l1;//
uint8_tcdm_type;
uint8_tfreq_density;//The density field, p and comb offset (for dot5).0: dot5 (even RB), 1: dot5 (odd RB), 2: one, 3: three
uint16_tscramb_id;//ScramblingID of the CSI-RS [TS38.214, sec 5.2.2.3.1] Value: 0->1023
//tx power info
uint8_tpower_control_offset;//Ratio of PDSCH EPRE to NZP CSI-RSEPRE Value :0->23 representing -8 to 15 dB in 1dB steps
uint8_tpower_control_offset_ss;//Ratio of SSB/PBCH block EPRE to NZP CSI-RS EPRES 0: -3dB, 1: 0dB, 2: 3dB, 3: 6dB
}nfapi_nr_dl_tti_csi_rs_pdu_rel15_t;
//for ssb_pdu:
...
...
@@ -743,27 +877,85 @@ typedef struct
}nfapi_nr_bch_payload_t;
typedefstruct
{
uint16_tphys_cell_id;//0~1007
uint8_tbeta_pss;//PSS EPRE to SSS EPRE in a SS/PBCH block 0 = 0dB 1 = 3dB
uint8_tssb_block_index;//SS/PBCH block index within a SSB burst set. Required for PBCH DMRS scrambling. Value: 0->63 (Lmax)
uint8_tssb_subcarrier_offset;//
uint16_tssb_offset_point_a;//Offset of lowest subcarrier of lowest resource block used for SS/PBCH block. Value: 0->2199
uint8_tbch_payload_flag;//A value indicating how the BCH payload is generated. This should match the PARAM/CONFIG TLVs. Value: 0: MAC generates the full PBCH payload, see Table 3-41, where bchPayload has 31 bits 1: PHY generates the timing PBCH bits, see Table 3-41, where the bchPayload has 24 bits 2: PHY generates the full PBCH payload
nfapi_nr_bch_payload_tbch_payload;
typedefstruct{
/// Physical Cell ID Value 0~>1007
uint16_tPhysCellId;
///PSS EPRE to SSS EPRE in a SS/PBCH block 0 = 0dB 1 = 3dB
uint8_tBetaPss;
///SS/PBCH block index within a SSB burst set. Required for PBCH DMRS scrambling. Value: 0->63 (Lmax)
uint8_tSsbBlockIndex;
/// ssbSubcarrierOffset or 𝑘𝑆𝑆𝐵 (TS38.211, section 7.4.3.1) Value: 0->31
uint8_tSsbSubcarrierOffset;
///Offset of lowest subcarrier of lowest resource block used for SS/PBCH block. Value: 0->2199
uint16_tssbOffsetPointA;
/// A value indicating how the BCH payload is generated. This should match the PARAM/CONFIG TLVs. Value: 0: MAC generates the full PBCH payload, see Table 3-41, where bchPayload has 31 bits 1: PHY generates the timing PBCH bits, see Table 3-41, where the bchPayload has 24 bits 2: PHY generates the full PBCH payload
///Size of the PDU control information (in bytes). This length value includes the 4 bytes required for the PDU type and PDU size parameters. Value 0 -> 65535
oai_nfapi_nr_dl_config_req(Sched_INFO->DL_req);// DJP - .dl_config_request_body.dl_config_pdu_list[0]); // DJP - FIXME TODO - yuk - only copes with 1 pdu
AssertFatal(cc->ServingCellConfigCommon->downlinkConfigCommon!=NULL,"scc->downlinkConfigCommonL is null\n");
AssertFatal(cc->ServingCellConfigCommon->downlinkConfigCommon->frequencyInfoDL!=NULL,"scc->downlinkConfigCommon->frequencyInfoDL is null\n");
AssertFatal(cc->ServingCellConfigCommon->downlinkConfigCommon->frequencyInfoDL->absoluteFrequencySSB!=NULL,"scc->downlinkConfigCommon->frequencyInfoDL->absoluteFrequencySSB is null\n");
AssertFatal(cc->ServingCellConfigCommon->downlinkConfigCommon->frequencyInfoDL->frequencyBandList.list.count!=1,"Frequency Band list does not have 1 element (%d)\n",cc->ServingCellConfigCommon->downlinkConfigCommon->frequencyInfoDL->frequencyBandList.list.count);
AssertFatal(cc->ServingCellConfigCommon->ssbSubcarrierSpacing,"ssbSubcarrierSpacing is null\n");
AssertFatal(cc->ServingCellConfigCommon->downlinkConfigCommon->frequencyInfoDL->frequencyBandList.list.array[0],"band is null\n");
