Skip to content

O
OpenXG-RAN
Commit fb65ca00 authored by Raymond Knopp's avatar Raymond Knopp
Browse files
Options

Merge remote-tracking branch 'origin/develop-nr' into nr-polar-encoder-optimizations

parents 5c2a411a 01aead2b
Expand all Show whitespace changes
Inline Side-by-side
Showing with 2133 additions and 2654 deletions
ci-scripts/Jenkinsfile-gitlab
View file @ fb65ca00
This diff is collapsed.
ci-scripts/buildOnVM.sh
View file @ fb65ca00
This diff is collapsed.
ci-scripts/conf_files/enb.band40.tm1.100PRB.FairScheduler.usrpb210.conf
View file @ fb65ca00
......@@ -134,7 +134,7 @@ eNBs =
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "10.0.0.2";
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -144,13 +144,11 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "10.0.0.1/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "10.0.0.1/24";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
......
ci-scripts/conf_files/enb.band40.tm1.25PRB.FairScheduler.usrpb210.conf
View file @ fb65ca00
......@@ -134,7 +134,7 @@ eNBs =
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "10.0.0.2";
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -144,13 +144,11 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "10.0.0.1/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "10.0.0.1/24";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
......
ci-scripts/conf_files/enb.band40.tm1.50PRB.FairScheduler.usrpb210.conf
View file @ fb65ca00
......@@ -134,7 +134,7 @@ eNBs =
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "10.0.0.2";
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -144,13 +144,11 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "10.0.0.1/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "10.0.0.1/24";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
......
ci-scripts/conf_files/enb.band7.tm1.100PRB.usrpb210.conf
View file @ fb65ca00
......@@ -171,7 +171,7 @@ eNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -181,12 +181,11 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
......
ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf
View file @ fb65ca00
......@@ -171,7 +171,7 @@ eNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -181,12 +181,11 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
......
ci-scripts/conf_files/enb.band7.tm1.50PRB.usrpb210.conf
View file @ fb65ca00
......@@ -171,7 +171,7 @@ eNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -181,12 +181,11 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
......
ci-scripts/conf_files/lte-fdd-basic-sim.conf
View file @ fb65ca00
......@@ -186,7 +186,6 @@ eNBs =
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
......
ci-scripts/conf_files/lte-tdd-basic-sim.conf
View file @ fb65ca00
......@@ -145,11 +145,9 @@ eNBs =
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
......
ci-scripts/conf_files/rcc.band40.tm1.100PRB.FairScheduler.usrpb210.conf
View file @ fb65ca00
......@@ -137,7 +137,7 @@ eNBs =
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "10.0.0.2";
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -147,13 +147,11 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "10.0.0.1/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "10.0.0.1/24";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
......
ci-scripts/conf_files/rcc.band40.tm1.25PRB.FairScheduler.usrpb210.conf
View file @ fb65ca00
......@@ -137,7 +137,7 @@ eNBs =
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "10.0.0.2";
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -147,13 +147,11 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "10.0.0.1/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "10.0.0.1/24";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
......
ci-scripts/conf_files/rcc.band40.tm1.50PRB.FairScheduler.usrpb210.conf
View file @ fb65ca00
......@@ -137,7 +137,7 @@ eNBs =
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "10.0.0.2";
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -147,13 +147,11 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "10.0.0.1/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "10.0.0.1/24";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
......
ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.100PRB.usrpb210.conf
View file @ fb65ca00
......@@ -174,7 +174,7 @@ eNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -184,12 +184,11 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
......
ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.25PRB.usrpb210.conf
View file @ fb65ca00
......@@ -174,7 +174,7 @@ eNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -184,12 +184,11 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
......
ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.50PRB.usrpb210.conf
View file @ fb65ca00
......@@ -174,7 +174,7 @@ eNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -184,12 +184,11 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
......
ci-scripts/createVM.sh
View file @ fb65ca00
......@@ -20,8 +20,8 @@
# * contact@openairinterface.org
# */
function usage {
echo "OAI VM Creation script"
function create_usage {
echo "OAI CI VM script"
echo " Original Author: Raphael Defosseux"
echo " Requirements:"
echo " -- uvtool uvtool-libvirt apt-cacher"
......@@ -31,9 +31,9 @@ function usage {
echo ""
echo "Usage:"
echo "------"
echo " createVM.sh [OPTIONS]"
echo " oai-ci-vm-tool create [OPTIONS]"
echo ""
echo "Options:"
echo "Mandatory Options:"
echo "--------"
echo " --job-name #### OR -jn ####"
echo " Specify the name of the Jenkins job."
......@@ -41,14 +41,7 @@ function usage {
echo " --build-id #### OR -id ####"
echo " Specify the build ID of the Jenkins job."
echo ""
echo " --variant enb-usrp OR -v1"
echo " --variant basic-sim OR -v2"
echo " --variant phy-sim OR -v3"
echo " --variant cppcheck OR -v4"
echo " --variant gnb-usrp OR -v5"
echo " --variant nu-ue-usrp OR -v6"
echo " --variant enb-ethernet OR -v7"
echo " --variant ue-ethernet OR -v8"
variant_usage
echo " Specify the variant to build."
echo ""
echo " --help OR -h"
......@@ -56,158 +49,21 @@ function usage {
echo ""
}
function variant_usage {
echo "OAI VM Build Check script"
echo " Original Author: Raphael Defosseux"
echo ""
echo " --variant enb-usrp OR -v1"
echo " --variant basic-sim OR -v2"
echo " --variant phy-sim OR -v3"
echo " --variant cppcheck OR -v4"
echo " --variant gnb-usrp OR -v5"
echo " --variant nu-ue-usrp OR -v6"
echo " --variant enb-ethernet OR -v7"
echo " --variant ue-ethernet OR -v8"
echo ""
}
if [ $# -lt 1 ] || [ $# -gt 6 ]
then
echo "Syntax Error: not the correct number of arguments"
echo ""
usage
exit 1
fi
VM_TEMPLATE=ci-
JOB_NAME=XX
BUILD_ID=XX
VM_NAME=ci-enb-usrp
VM_MEMORY=2048
VM_CPU=4
while [[ $# -gt 0 ]]
do
key="$1"
function create_vm {
echo "############################################################"
echo "OAI CI VM script"
echo "############################################################"
echo "VM_NAME = $VM_NAME"
echo "VM_MEMORY = $VM_MEMORY MBytes"
echo "VM_CPU = $VM_CPU"
case $key in
-h|--help)
shift
usage
exit 0
;;
-jn|--job-name)
JOB_NAME="$2"
shift
shift
;;
-id|--build-id)
BUILD_ID="$2"
shift
shift
;;
-v1)
VM_NAME=ci-enb-usrp
shift
;;
-v2)
VM_NAME=ci-basic-sim
VM_MEMORY=8192
shift
;;
-v3)
VM_NAME=ci-phy-sim
shift
;;
-v4)
VM_NAME=ci-cppcheck
VM_MEMORY=8192
shift
;;
-v5)
VM_NAME=ci-gnb-usrp
shift
;;
-v6)
VM_NAME=ci-ue-nr-usrp
shift
;;
-v7)
VM_NAME=ci-enb-ethernet
shift
;;
-v8)
VM_NAME=ci-ue-ethernet
shift
;;
--variant)
variant="$2"
case $variant in
enb-usrp)
VM_NAME=ci-enb-usrp
;;
basic-sim)
VM_NAME=ci-basic-sim
VM_MEMORY=8192
;;
phy-sim)
VM_NAME=ci-phy-sim
;;
cppcheck)
VM_NAME=ci-cppcheck
VM_MEMORY=8192
;;
gnb-usrp)
VM_NAME=ci-gnb-usrp
;;
nu-ue-usrp)
VM_NAME=ci-ue-nr-usrp
;;
enb-ethernet)
VM_NAME=ci-enb-ethernet
;;
ue-ethernet)
VM_NAME=ci-ue-ethernet
;;
*)
echo ""
echo "Syntax Error: Invalid Variant option -> $variant"
echo ""
variant_usage
exit 1
esac
shift
shift
;;
*)
echo "Syntax Error: unknown option: $key"
echo ""
usage
exit 1
esac
done
if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ]
then
VM_TEMPLATE=ci-
else
VM_TEMPLATE=${JOB_NAME}-b${BUILD_ID}-
fi
echo "############################################################"
echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base"
echo "############################################################"
uvt-kvm create $VM_NAME release=xenial --memory $VM_MEMORY --cpu $VM_CPU --unsafe-caching --template ci-scripts/template-host.xml
echo "Waiting for VM to be started"
uvt-kvm wait $VM_NAME --insecure
VM_NAME=`echo $VM_NAME | sed -e "s#ci-#$VM_TEMPLATE#"`
VM_CMDS=${VM_NAME}_cmds.txt
echo "VM_NAME = $VM_NAME"
echo "VM_MEMORY = $VM_MEMORY MBytes"
echo "VM_CPU = $VM_CPU"
echo "############################################################"
echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base"
echo "############################################################"
uvt-kvm create $VM_NAME release=xenial --memory $VM_MEMORY --cpu $VM_CPU --unsafe-caching --template ci-scripts/template-host.xml
echo "Waiting for VM to be started"
uvt-kvm wait $VM_NAME --insecure
VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
exit 0
VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
}
ci-scripts/destroyAllRunningVM.sh
View file @ fb65ca00
......@@ -20,15 +20,17 @@
# * contact@openairinterface.org
# */
function usage {
echo "OAI VM Destroy script"
function destroy_usage {
echo "OAI CI VM script"
echo " Original Author: Raphael Defosseux"
echo " Requirements:"
echo " -- uvtool uvtool-libvirt apt-cacher"
echo ""
echo "Usage:"
echo "------"
echo " destroyAllRunningVM.sh [OPTIONS]"
echo " oai-ci-vm-tool destroy [OPTIONS]"
echo ""
echo "Options:"
echo "Mandatory Options:"
echo "--------"
echo " --job-name #### OR -jn ####"
echo " Specify the name of the Jenkins job."
......@@ -36,66 +38,26 @@ function usage {
echo " --build-id #### OR -id ####"
echo " Specify the build ID of the Jenkins job."
echo ""
echo "Options:"
echo "--------"
echo " --help OR -h"
echo " Print this help message."
echo ""
}
if [ $# -gt 4 ]
then
echo "Syntax Error: not the correct number of arguments"
echo ""
usage
exit 1
fi
VM_TEMPLATE=ci-
JOB_NAME=XX
BUILD_ID=XX
function destroy_vm {
echo "############################################################"
echo "OAI CI VM script"
echo "############################################################"
echo "VM_TEMPLATE = $VM_TEMPLATE"
while [[ $# -gt 0 ]]
do
key="$1"
case $key in
-h|--help)
shift
usage
exit 0
;;
-jn|--job-name)
JOB_NAME="$2"
shift
shift
;;
-id|--build-id)
BUILD_ID="$2"
shift
shift
;;
*)
echo "Syntax Error: unknown option: $key"
echo ""
usage
exit 1
esac
done
LIST_CI_VM=`uvt-kvm list | grep $VM_TEMPLATE`
if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ]
then
VM_TEMPLATE=ci-
else
VM_TEMPLATE=${JOB_NAME}-b${BUILD_ID}-
fi
LIST_CI_VM=`uvt-kvm list | grep $VM_TEMPLATE`
for CI_VM in $LIST_CI_VM
do
for CI_VM in $LIST_CI_VM
do
VM_IP_ADDR=`uvt-kvm ip $CI_VM`
echo "VM to destroy: $CI_VM -- IP $VM_IP_ADDR"
uvt-kvm destroy $CI_VM
ssh-keygen -R $VM_IP_ADDR
done
exit 0
done
}
ci-scripts/main.py
View file @ fb65ca00
......@@ -367,10 +367,8 @@ class SSHConnection():
rruCheck = True
# Make a copy and adapt to EPC / eNB IP addresses
self.command('cp ' + full_config_file + ' ' + ci_full_config_file, '\$', 5)
self.command('sed -i -e \'s/mme_ip_address.*$/mme_ip_address = ( { ipv4 = "' + self.EPCIPAddress + '";/\' ' + ci_full_config_file, '\$', 2);
self.command('sed -i -e \'s/ENB_IPV4_ADDRESS_FOR_S1_MME.*$/ENB_IPV4_ADDRESS_FOR_S1_MME = "' + self.eNBIPAddress + '";/\' ' + ci_full_config_file, '\$', 2);
self.command('sed -i -e \'s/ENB_IPV4_ADDRESS_FOR_S1U.*$/ENB_IPV4_ADDRESS_FOR_S1U = "' + self.eNBIPAddress + '";/\' ' + ci_full_config_file, '\$', 2);
self.command('sed -i -e \'s/ENB_IPV4_ADDRESS_FOR_X2C.*$/ENB_IPV4_ADDRESS_FOR_X2C = "' + self.eNBIPAddress + '";/\' ' + ci_full_config_file, '\$', 2);
self.command('sed -i -e \'s/CI_MME_IP_ADDR/' + self.EPCIPAddress + '/\' ' + ci_full_config_file, '\$', 2);
self.command('sed -i -e \'s/CI_ENB_IP_ADDR/' + self.eNBIPAddress + '/\' ' + ci_full_config_file, '\$', 2);
# Launch eNB with the modified config file
self.command('source oaienv', '\$', 5)
self.command('cd cmake_targets', '\$', 5)
......
ci-scripts/oai-ci-vm-tool 0 → 100755
View file @ fb65ca00
This diff is collapsed.
ci-scripts/reportBuildLocally.sh
View file @ fb65ca00
This diff is collapsed.
ci-scripts/reportTestLocally.sh
View file @ fb65ca00
This diff is collapsed.
ci-scripts/runTestOnVM.sh
View file @ fb65ca00
......@@ -20,15 +20,18 @@
# * contact@openairinterface.org
# */
function usage {
echo "OAI VM Test Run script"
function run_test_usage {
echo "OAI CI VM script"
echo " Original Author: Raphael Defosseux"
echo " Requirements:"
echo " -- uvtool uvtool-libvirt apt-cacher"
echo " -- xenial image already synced"
echo " Default:"
echo " -- eNB with USRP"
echo ""
echo "Usage:"
echo "------"
echo " runTestOnVM.sh [OPTIONS]"
echo " oai-ci-vm-tool test [OPTIONS]"
echo ""
echo "Options:"
echo "--------"
......@@ -41,12 +44,7 @@ function usage {
echo " --workspace #### OR -ws ####"
echo " Specify the workspace."
echo ""
echo " --variant enb-usrp OR -v1"
echo " --variant basic-sim OR -v2"
echo " --variant phy-sim OR -v3"
echo " --variant cppcheck OR -v4"
echo " --variant enb-ethernet OR -v7"
echo " --variant ue-ethernet OR -v8"
variant_usage
echo " Specify the variant to build."
echo ""
echo " --keep-vm-alive OR -k"
......@@ -57,19 +55,6 @@ function usage {
echo ""
}
function variant_usage {
echo "OAI VM Test Run script"
echo " Original Author: Raphael Defosseux"
echo ""
echo " --variant enb-usrp OR -v1"
echo " --variant basic-sim OR -v2"
echo " --variant phy-sim OR -v3"
echo " --variant cppcheck OR -v4"
echo " --variant enb-ethernet OR -v7"
echo " --variant ue-ethernet OR -v8"
echo ""
}
function start_basic_sim_enb {
local LOC_VM_IP_ADDR=$2
local LOC_EPC_IP_ADDR=$3
......@@ -95,6 +80,7 @@ function start_basic_sim_enb {
echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE\" > ./my-lte-softmodem-run.sh " >> $1
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
echo "cat ./my-lte-softmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/enb -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$LOC_VM_IP_ADDR < $1
......@@ -112,6 +98,7 @@ function start_basic_sim_ue {
echo "echo \"./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_NB_RBS --ue-rxgain 140\" > ./my-lte-uesoftmodem-run.sh" >> $1
echo "chmod 775 ./my-lte-uesoftmodem-run.sh" >> $1
echo "cat ./my-lte-uesoftmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE; fi" >> $1
echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/ue -o /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ./my-lte-uesoftmodem-run.sh" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
......@@ -299,155 +286,31 @@ function terminate_ltebox_epc {
rm $1
}
if [ $# -lt 1 ] || [ $# -gt 9 ]
then
echo "Syntax Error: not the correct number of arguments"
echo ""
usage
exit 1
fi
VM_TEMPLATE=ci-
JOB_NAME=XX
BUILD_ID=XX
VM_NAME=ci-enb-usrp
ARCHIVES_LOC=enb_usrp/test
KEEP_VM_ALIVE=0
RUN_OPTIONS="none"
STATUS=0
while [[ $# -gt 0 ]]
do
key="$1"
case $key in
-h|--help)
shift
usage
exit 0
;;
-jn|--job-name)
JOB_NAME="$2"
shift
shift
;;
-id|--build-id)
BUILD_ID="$2"
shift
shift
;;
-ws|--workspace)
JENKINS_WKSP="$2"
shift
shift
;;
-k|--keep-vm-alive)
KEEP_VM_ALIVE=1
shift
;;
-v1)
VM_NAME=ci-enb-usrp
shift
;;
-v2)
VM_NAME=ci-basic-sim
RUN_OPTIONS="complex"
ARCHIVES_LOC=basic_sim/test
shift
;;
-v3)
VM_NAME=ci-phy-sim
RUN_OPTIONS="./run_exec_autotests.bash -g \"01510*\" -q -np -b"
ARCHIVES_LOC=phy_sim/test
shift
;;
-v4)
VM_NAME=ci-cppcheck
shift
;;
-v7)
VM_NAME=ci-enb-ethernet
shift
;;
-v8)
VM_NAME=ci-ue-ethernet
shift
;;
--variant)
variant="$2"
case $variant in
enb-usrp)
VM_NAME=ci-enb-usrp
;;
basic-sim)
VM_NAME=ci-basic-sim
RUN_OPTIONS="complex"
ARCHIVES_LOC=basic_sim/test
;;
phy-sim)
VM_NAME=ci-phy-sim
RUN_OPTIONS="./run_exec_autotests.bash -g \"01510*\" -q -np -b"
ARCHIVES_LOC=phy_sim/test
;;
cppcheck)
VM_NAME=ci-cppcheck
;;
enb-ethernet)
VM_NAME=ci-enb-ethernet
;;
ue-ethernet)
VM_NAME=ci-ue-ethernet
;;
*)
echo ""
echo "Syntax Error: Invalid Variant option -> $variant"
echo ""
variant_usage
exit 1
esac
shift
shift
;;
*)
echo "Syntax Error: unknown option: $key"
echo ""
usage
exit 1
esac
done
if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ]
then
VM_TEMPLATE=ci-
else
VM_TEMPLATE=${JOB_NAME}-b${BUILD_ID}-
fi
VM_NAME=`echo $VM_NAME | sed -e "s#ci-#$VM_TEMPLATE#"`
VM_CMDS=${VM_NAME}_cmds.txt
ARCHIVES_LOC=${JENKINS_WKSP}/archives/${ARCHIVES_LOC}
echo "VM_NAME = $VM_NAME"
echo "VM_CMD_FILE = $VM_CMDS"
echo "JENKINS_WKSP = $JENKINS_WKSP"
echo "ARCHIVES_LOC = $ARCHIVES_LOC"
echo "############################################################"
echo "Waiting for VM to be started"
echo "############################################################"
uvt-kvm wait $VM_NAME --insecure
VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
if [ "$RUN_OPTIONS" == "none" ]
then
function run_test_on_vm {
echo "############################################################"
echo "OAI CI VM script"
echo "############################################################"
echo "VM_NAME = $VM_NAME"
echo "VM_CMD_FILE = $VM_CMDS"
echo "JENKINS_WKSP = $JENKINS_WKSP"
echo "ARCHIVES_LOC = $ARCHIVES_LOC"
echo "############################################################"
echo "Waiting for VM to be started"
echo "############################################################"
uvt-kvm wait $VM_NAME --insecure
VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
if [ "$RUN_OPTIONS" == "none" ]
then
echo "No run on VM testing for this variant currently"
exit $STATUS
fi
fi
if [[ $RUN_OPTIONS =~ .*run_exec_autotests.* ]]
then
if [[ $RUN_OPTIONS =~ .*run_exec_autotests.* ]]
then
echo "############################################################"
echo "Running test script on VM ($VM_NAME)"
echo "############################################################"
......@@ -542,10 +405,10 @@ then
if [ $NB_RUNS -eq 0 ]; then STATUS=-1; fi
if [ $NB_FAILURES -ne 0 ]; then STATUS=-1; fi
fi
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-basic-sim.* ]]
then
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-basic-sim.* ]]
then
PING_STATUS=0
IPERF_STATUS=0
if [ -d $ARCHIVES_LOC ]
......@@ -1019,6 +882,17 @@ then
terminate_ltebox_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
fi
if [ $KEEP_VM_ALIVE -eq 0 ]
then
echo "############################################################"
echo "Destroying VMs"
echo "############################################################"
uvt-kvm destroy $VM_NAME
ssh-keygen -R $VM_IP_ADDR
uvt-kvm destroy $EPC_VM_NAME
ssh-keygen -R $EPC_VM_IP_ADDR
fi
echo "############################################################"
echo "Checking run status"
echo "############################################################"
......@@ -1026,13 +900,5 @@ then
if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
fi
if [ $STATUS -eq 0 ]
then
echo "STATUS seems OK"
else
echo "STATUS failed?"
fi
exit $STATUS
fi
}
ci-scripts/waitBuildOnVM.sh
View file @ fb65ca00
This diff is collapsed.
cmake_targets/autotests/run_exec_autotests.bash
View file @ fb65ca00
......@@ -303,7 +303,8 @@ function test_compile_and_run() {
do
global_result=1
result_string=""
PROPER_DESC=`echo ${desc_array[$tags_array_index]} | sed -e "s@^.*lsim.*est case.*(Test@Test@" -e "s@^ *(@@" -e "s/),$//"`
PROPER_DESC=`echo ${desc_array[$tags_array_index]} | sed -e "s@^.*Test cases.*(Test@Test@" -e "s@^ *(@@" -e"s/)$//" -e "s/),$//"`
echo_info "$PROPER_DESC"
for (( run_index=1; run_index <= $nruns; run_index++ ))
do
......
cmake_targets/autotests/test_case_list.xml
View file @ fb65ca00
......@@ -933,23 +933,20 @@
<testCase id="015100">
<class>execution</class>
<desc>dlsim test cases (Test 1: 10 MHz, R2.FDD (MCS 5), EVA5, -1dB),
<desc>dlsim Test cases. (Test 1: 10 MHz, R2.FDD (MCS 5), EVA5, -1dB),
(Test 5: 1.4 MHz, R4.FDD (MCS 4), EVA5, 0dB (70%)),
(Test 6, 10 MHz, R3.FDD (MCS 15), EVA5, 6.7dB (70%)),
(Test 6b, 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (70%)),
(Test 7, 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (30%)),
(Test 7b, 5 MHz, R3-1.FDD (MCS 15), ETU70, 1.4 dB (30%)),
(Test 10, 5 MHz, R6.FDD (MCS 25), EVA5, 17.4 dB (70%)),
(Test 10b, 5 MHz, R6-1.FDD (MCS 24,18 PRB), EVA5, 17.5dB (70%)),
(Test 11, 10 MHz, R7.FDD (MCS 25), EVA5, 17.7dB (70%)),
(Test 11b, 10 MHz, R7-1.FDD (MCS 25), EVA5, 16.7dB (70%)),
(Test 15, 20 MHz, R.9 FDD (MCS 26), EVA5, 17.6dB (70%)),
(Test 15b, 20 MHz, R.9-2 FDD (MCS 26, 17PRB), EVA5, 17.3dB (70%)),
(Test 15c, 20 MHz, R.9-1 FDD (MCS 26, 83 PRB), EVA5, 16.6dB (70%)),
(TM2 Test 1 10 MHz, R.11 FDD (MCS 14), EVA5, 6.8 dB (70%)),
(TM2 Test 1b 5 MHz, R.11-2 FDD (MCS 13), EVA5, 5.9 dB (70%)),
</desc>
(Test 6: 10 MHz, R3.FDD (MCS 15), EVA5, 6.7dB (70%)),
(Test 6b: 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (70%)),
(Test 7: 10 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (30%)),
(Test 7b: 5 MHz, R3-1.FDD (MCS 15), ETU70, 1.4 dB (30%)),
(Test 10: 5 MHz, R6.FDD (MCS 25), EVA5, 17.4 dB (70%)),
(Test 10b: 5 MHz, R6-1.FDD (MCS 24,18 PRB), EVA5, 17.5dB (70%)),
(Test 11: 10 MHz, R7.FDD (MCS 25), EVA5, 17.7dB (70%)),
(Test 15: 20 MHz, R.9 FDD (MCS 26), EVA5, 17.6dB (70%)),
(Test 15b: 20 MHz, R.9-2 FDD (MCS 26, 17PRB), EVA5, 17.3dB (70%)),
(Test 15c: 20 MHz, R.9-1 FDD (MCS 26, 83 PRB), EVA5, 16.6dB (70%)),
(TM2 Test 1: 10 MHz, R.11 FDD (MCS 14), EVA5, 6.8 dB (70%)),
(TM2 Test 1b: 5 MHz, R.11-2 FDD (MCS 13), EVA5, 5.9 dB (70%))</desc>
<pre_compile_prog></pre_compile_prog>
<compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
<compile_prog_args> --phy_simulators -c </compile_prog_args>
......@@ -970,7 +967,7 @@
-m26 -gF -s16.6 -w1.0 -f.2 -n500 -B100 -c2 -z2 -r1899 -O60
-m14 -gF -s6.8 -w1.0 -f.2 -n500 -B50 -c2 -x2 -y2 -z2 -O60
-m13 -gF -s5.9 -w1.0 -f.2 -n500 -B25 -c3 -x2 -y2 -z2 -O60</main_exec_args>
<tags>dlsim.test1 dlsim.test5 dlsim.test6 dlsim.test6b dlsim.test7 dlsim.test7b dlsim.test10 dlsim.test10b dlsim.test11 dlsim.TM2_test1 dlsim.TM2_test1b</tags>
<tags>dlsim.test1 dlsim.test5 dlsim.test6 dlsim.test6b dlsim.test7 dlsim.test7b dlsim.test10 dlsim.test10b dlsim.test11 dlsim.test11a dlsim.test11b dlsim.test11c dlsim.TM2_test1 dlsim.TM2_test1b</tags>
<search_expr_true>"passed"</search_expr_true>
<search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
<nruns>3</nruns>
......@@ -978,12 +975,12 @@
<testCase id="015101">
<class>execution</class>
<desc>ulsim Test cases. (Test 1, 5 MHz, FDD (MCS 5), AWGN, 6dB),
(Test 2, 5 MHz, FDD (MCS 16), AWGN , 12dB (70%)),
(Test 3, 10 MHz, R3.FDD (MCS 5), AWGN, 6dB (70%)),
(Test 4, 10 MHz, R3-1.FDD (MCS 16), AWGN, 12dB (70%)),
(Test 5, 20 MHz, FDD (MCS 5), AWGN, 6dB (70%)),
(Test 6, 20 MHz, FDD (MCS 16), AWGN, 12 dB (70%))</desc>
<desc>ulsim Test cases. (Test 1: 5 MHz, FDD (MCS 5), AWGN, 6dB),
(Test 2: 5 MHz, FDD (MCS 16), AWGN , 12dB (70%)),
(Test 3: 10 MHz, R3.FDD (MCS 5), AWGN, 6dB (70%)),
(Test 4: 10 MHz, R3-1.FDD (MCS 16), AWGN, 12dB (70%)),
(Test 5: 20 MHz, FDD (MCS 5), AWGN, 6dB (70%)),
(Test 6: 20 MHz, FDD (MCS 16), AWGN, 12 dB (70%))</desc>
<pre_compile_prog></pre_compile_prog>
<compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
<compile_prog_args> --phy_simulators -c </compile_prog_args>
......@@ -1004,7 +1001,16 @@
<testCase id="015102">
<class>execution</class>
<desc>ldpctest test cases.</desc>
<desc>ldpc Test cases. (Test1: block length = 3872),
(Test2: block length = 4224),
(Test3: block length = 4576),
(Test4: block length = 4928),
(Test5: block length = 5280),
(Test6: block length = 5632),
(Test7: block length = 6336),
(Test8: block length = 7040),
(Test9: block length = 7744),
(Test10: block length = 8448)</desc>
<pre_compile_prog></pre_compile_prog>
<compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
<compile_prog_args> --phy_simulators -c </compile_prog_args>
......@@ -1021,7 +1027,7 @@
-l7040 -s10 -n100
-l7744 -s10 -n100
-l8448 -s10 -n100</main_exec_args>
<tags>ldpctest.test1</tags>
<tags>ldpctest.test1 ldpctest.test2 ldpctest.test3 ldpctest.test4 ldpctest.test5 ldpctest.test6 ldpctest.test7 ldpctest.test8 ldpctest.test9 ldpctest.test10</tags>
<search_expr_true>BLER 0.000000</search_expr_true>
<search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
<nruns>3</nruns>
......@@ -1029,7 +1035,7 @@
<testCase id="015103">
<class>execution</class>
<desc>polartest test cases.</desc>
<desc>polartest Test cases. (Test1: PBCH polar test)</desc>
<pre_compile_prog></pre_compile_prog>
<compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
<compile_prog_args> --phy_simulators -c </compile_prog_args>
......@@ -1045,7 +1051,8 @@
<testCase id="015104">
<class>execution</class>
<desc>nr_pbchsim test cases.</desc>
<desc>nr_pbchsim Test cases. (Test1: PBCH-only),
(Test2: PBCH and synchronization)</desc>
<pre_compile_prog></pre_compile_prog>
<compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
<compile_prog_args> --phy_simulators -c </compile_prog_args>
......@@ -1054,8 +1061,8 @@
<main_exec> $OPENAIR_DIR/targets/bin/nr_pbchsim.Rel15</main_exec>
<main_exec_args>-s-11 -S-10 -n1000
-s-11 -S-10 -n10 -I</main_exec_args>
<tags>nr_pbchsim.test1</tags>
<search_expr_true>n_errors \(negative CRC\) = 0</search_expr_true>
<tags>nr_pbchsim.test1 nr_pbchsim.test2</tags>
<search_expr_true>PBCH test OK</search_expr_true>
<search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
<nruns>3</nruns>
</testCase>
......
openair1/PHY/INIT/nr_init.c
View file @ fb65ca00
......@@ -384,7 +384,7 @@ void nr_phy_config_request_sim(PHY_VARS_gNB *gNB,int N_RB_DL,int N_RB_UL,int mu)
gNB_config->rf_config.ul_carrier_bandwidth.value = N_RB_UL;
gNB_config->sch_config.half_frame_index.value = 0;
gNB_config->sch_config.ssb_subcarrier_offset.value = 0;
gNB_config->sch_config.n_ssb_crb.value = (N_RB_DL-20)>>1;
gNB_config->sch_config.n_ssb_crb.value = (N_RB_DL-20);
gNB_config->sch_config.ssb_subcarrier_offset.value = 0;
......@@ -419,7 +419,7 @@ void nr_phy_config_request(NR_PHY_Config_t *phy_config)
gNB_config->rf_config.ul_carrier_bandwidth.value = phy_config->cfg->rf_config.ul_carrier_bandwidth.value;//106;
gNB_config->sch_config.half_frame_index.value = 0;
gNB_config->sch_config.ssb_subcarrier_offset.value = phy_config->cfg->sch_config.ssb_subcarrier_offset.value;//0;
gNB_config->sch_config.n_ssb_crb.value = (phy_config->cfg->rf_config.dl_carrier_bandwidth.value-20)>>1;
gNB_config->sch_config.n_ssb_crb.value = (phy_config->cfg->rf_config.dl_carrier_bandwidth.value-20);
gNB_config->sch_config.physical_cell_id.value = phy_config->cfg->sch_config.physical_cell_id.value;
if (phy_config->cfg->subframe_config.duplex_mode.value == 0) {
......
openair1/PHY/INIT/nr_init_ue.c
View file @ fb65ca00
......@@ -655,7 +655,7 @@ int init_nr_ue_signal(PHY_VARS_NR_UE *ue,
int i,j,k,l;
int eNB_id;
int th_id;
int n_ssb_crb=(fp->N_RB_DL-20)>>1;
int n_ssb_crb=(fp->N_RB_DL-20);
abstraction_flag = 0;
fp->nb_antennas_tx = 1;
fp->nb_antennas_rx=1;
......
openair1/PHY/NR_UE_TRANSPORT/dci_nr.c
View file @ fb65ca00
......@@ -49,7 +49,7 @@
//#define NR_LTE_PDCCH_DCI_SWITCH
#define NR_PDCCH_DCI_RUN // activates new nr functions
//#define NR_PDCCH_DCI_DEBUG // activates NR_PDCCH_DCI_DEBUG logs
#define NR_PDCCH_DCI_DEBUG // activates NR_PDCCH_DCI_DEBUG logs
#define NR_NBR_CORESET_ACT_BWP 3 // The number of CoreSets per BWP is limited to 3 (including initial CORESET: ControlResourceId 0)
#define NR_NBR_SEARCHSPACE_ACT_BWP 10 // The number of SearSpaces per BWP is limited to 10 (including initial SEARCHSPACE: SearchSpaceId 0)
#define PDCCH_TEST_POLAR_TEMP_FIX
......
openair1/PHY/NR_UE_TRANSPORT/nr_initial_sync.c
View file @ fb65ca00
......@@ -149,7 +149,7 @@ int nr_initial_sync(PHY_VARS_NR_UE *ue, runmode_t mode)
int rx_power=0; //aarx,
//nfapi_nr_config_request_t* config;
int n_ssb_crb=(fp->N_RB_DL-20)>>1;
int n_ssb_crb=(fp->N_RB_DL-20);
// First try TDD normal prefix, mu 1
fp->Ncp=NORMAL;
fp->frame_type=TDD;
......@@ -213,12 +213,12 @@ int nr_initial_sync(PHY_VARS_NR_UE *ue, runmode_t mode)
nr_gold_pdcch(ue,0, 2);
/*
int nb_prefix_samples0 = frame_parms->nb_prefix_samples0;
frame_parms->nb_prefix_samples0 = frame_parms->nb_prefix_samples.
int nb_prefix_samples0 = fp->nb_prefix_samples0;
fp->nb_prefix_samples0 = fp->nb_prefix_samples;
nr_slot_fep(ue,0, 0, ue->ssb_offset, 0, 1, NR_PDCCH_EST);
nr_slot_fep(ue,1, 0, ue->ssb_offset, 0, 1, NR_PDCCH_EST);
frame_parms->nb_prefix_samples0 = nb_prefix_samples0;
fp->nb_prefix_samples0 = nb_prefix_samples0;
LOG_I(PHY,"[UE %d] AUTOTEST Cell Sync : frame = %d, rx_offset %d, freq_offset %d \n",
ue->Mod_id,
......
openair1/SCHED_NR_UE/phy_procedures_nr_ue.c
View file @ fb65ca00
......@@ -5913,8 +5913,8 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,UE_nr_rxtx_proc_t *proc,uint8_t eN
#endif
//nr_gold_pdcch(ue,0, 2);
/*
for (l=0; l<2; l++) {
for (int l=0; l<2; l++) {
if (abstraction_flag == 0) {
#if UE_TIMING_TRACE
start_meas(&ue->ofdm_demod_stats);
......@@ -5925,7 +5925,7 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,UE_nr_rxtx_proc_t *proc,uint8_t eN
l,
nr_tti_rx,
0,
1,
0,
1,
NR_PDCCH_EST);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_SLOT_FEP, VCD_FUNCTION_OUT);
......@@ -5933,47 +5933,50 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,UE_nr_rxtx_proc_t *proc,uint8_t eN
stop_meas(&ue->ofdm_demod_stats);
#endif
}
}*/
}
write_output("rxdataF.m","rxF",ue->common_vars.common_vars_rx_data_per_thread[ue->current_thread_id[nr_tti_rx>>1]].rxdataF[0],ue->frame_parms.ofdm_symbol_size*2,1,1);
//ue_measurement_procedures(l-1,ue,proc,eNB_id,(nr_tti_rx<<1),abstraction_flag,mode);
//if (do_pdcch_flag) {
// if ((l==pilot1) || ((pmch_flag==1)&(l==l2))) {
// LOG_D(PHY,"[UE %d] Frame %d: Calling pdcch procedures (eNB %d)\n",ue->Mod_id,frame_rx,eNB_id);
// if ((l==pilot1) || ((pmch_flag==1)&(l==l2))) {
// LOG_D(PHY,"[UE %d] Frame %d: Calling pdcch procedures (eNB %d)\n",ue->Mod_id,frame_rx,eNB_id);
//start_meas(&ue->rx_pdcch_stats[ue->current_thread_id[nr_tti_rx]]);
//printf(">>> at phy_procedures_nrUE_RX, nr_ue_pdcch_procedures init, dlsch->active=%d\n",
// ue->dlsch[ue->current_thread_id[nr_tti_rx]][eNB_id][0]->active);
//printf(">>> at phy_procedures_nrUE_RX, nr_ue_pdcch_procedures init, dlsch->active=%d\n",
// ue->dlsch[ue->current_thread_id[nr_tti_rx]][eNB_id][0]->active);
if (nr_ue_pdcch_procedures(eNB_id,ue,proc,abstraction_flag) == -1) {
LOG_E(PHY,"[UE %d] Frame %d, nr_tti_rx %d: Error in pdcch procedures\n",ue->Mod_id,frame_rx,nr_tti_rx);
return(-1);
}
//for (int m=0;m<1000;m++) printf("%d",m);
//printf("\n>>> at phy_procedures_nrUE_RX, nr_ue_pdcch_procedures end, dlsch->active=%d\n",
// ue->dlsch[ue->current_thread_id[nr_tti_rx]][eNB_id][0]->active);
//for (int m=0;m<1000;m++) printf("%d",m);
//printf("\n>>> at phy_procedures_nrUE_RX, nr_ue_pdcch_procedures end, dlsch->active=%d\n",
// ue->dlsch[ue->current_thread_id[nr_tti_rx]][eNB_id][0]->active);
// preparing for PDSCH procedures
// if (ue->dlsch[ue->current_thread_id[nr_tti_rx]][eNB_id][0]->active == 1) {
// ue_pdsch_procedures(ue,
// proc,
// eNB_id,
// PDSCH,
// ue->dlsch[ue->current_thread_id[nr_tti_rx]][eNB_id][0],
// NULL,
// ue->pdcch_vars[ue->current_thread_id[nr_tti_rx]][eNB_id]->num_pdcch_symbols,
// ue->frame_parms.symbols_per_tti>>1,
// abstraction_flag);
// }
// if (ue->dlsch[ue->current_thread_id[nr_tti_rx]][eNB_id][0]->active == 1) {
// ue_pdsch_procedures(ue,
// proc,
// eNB_id,
// PDSCH,
// ue->dlsch[ue->current_thread_id[nr_tti_rx]][eNB_id][0],
// NULL,
// ue->pdcch_vars[ue->current_thread_id[nr_tti_rx]][eNB_id]->num_pdcch_symbols,
// ue->frame_parms.symbols_per_tti>>1,
// abstraction_flag);
// }
#if 0
//stop_meas(&ue->rx_pdcch_stats[ue->current_thread_id[nr_tti_rx]]);
//printf("nr_tti_rx %d n_pdcch_sym %d pdcch procedures %5.3f \n",
// nr_tti_rx, ue->pdcch_vars[ue->current_thread_id[nr_tti_rx]][eNB_id]->num_pdcch_symbols,
// (ue->rx_pdcch_stats[ue->current_thread_id[nr_tti_rx]].p_time)/(cpuf*1000.0));
LOG_D(PHY,"num_pdcch_symbols %d\n",ue->pdcch_vars[ue->current_thread_id[nr_tti_rx]][eNB_id]->num_pdcch_symbols);
// }
// }
//}
// } // for l=1..l2
// } // for l=1..l2
ue_measurement_procedures(l-1,ue,proc,eNB_id,(nr_tti_rx<<1),abstraction_flag,mode);
......
openair1/SIMULATION/NR_PHY/pbchsim.c
View file @ fb65ca00
......@@ -133,6 +133,8 @@ int main(int argc, char **argv)
int loglvl=OAILOG_WARNING;
float target_error_rate = 0.01;
cpuf = get_cpu_freq_GHz();
if ( load_configmodule(argc,argv) == 0) {
......@@ -296,6 +298,7 @@ int main(int argc, char **argv)
case 'I':
run_initial_sync=1;
target_error_rate=0.1;
break;
case 'L':
......@@ -442,11 +445,10 @@ int main(int argc, char **argv)
for (int i=0;i<4;i++) gNB->pbch_pdu[i]=i+1;
nr_common_signal_procedures (gNB,frame,subframe);
/*
LOG_M("txsigF0.m","txsF0", gNB->common_vars.txdataF[0],frame_length_complex_samples_no_prefix,1,1);
if (gNB->frame_parms.nb_antennas_tx>1)
LOG_M("txsigF1.m","txsF1", gNB->common_vars.txdataF[1],frame_length_complex_samples_no_prefix,1,1);
*/
//TODO: loop over slots
for (aa=0; aa<gNB->frame_parms.nb_antennas_tx; aa++) {
if (gNB_config->subframe_config.dl_cyclic_prefix_type.value == 1) {
......@@ -571,6 +573,11 @@ int main(int argc, char **argv)
printf("SNR %f : n_errors (negative CRC) = %d/%d\n", SNR,n_errors,n_trials);
if ((float)n_errors/(float)n_trials <= target_error_rate) {
printf("PBCH test OK\n");
break;
}
if (n_trials==1)
break;
......
targets/RT/USER/nr-ue.c
View file @ fb65ca00
......@@ -956,7 +956,7 @@ void *UE_thread(void *arg) {
#if BASIC_SIMULATOR
{
int t;
for (t = 0; t < 2; t++) {
for (t = 0; t < RX_NB_TH; t++) {
UE_rxtx_proc_t *proc = &UE->proc.proc_rxtx[t];
pthread_mutex_lock(&proc->mutex_rxtx);
while (proc->instance_cnt_rxtx >= 0) pthread_cond_wait( &proc->cond_rxtx, &proc->mutex_rxtx );
......@@ -964,13 +964,13 @@ void *UE_thread(void *arg) {
}
}
#endif
LOG_D(PHY,"Process subframe %d thread Idx %d \n", subframe_nr, UE->current_thread_id[subframe_nr]);
thread_idx++;
if(thread_idx>=RX_NB_TH)
thread_idx = 0;
if (UE->mode != loop_through_memory) {
for (i=0; i<UE->frame_parms.nb_antennas_rx; i++)
rxp[i] = (void*)&UE->common_vars.rxdata[i][UE->frame_parms.ofdm_symbol_size+
......@@ -1033,9 +1033,6 @@ void *UE_thread(void *arg) {
if ( first_symbols <0 )
LOG_E(PHY,"can't compensate: diff =%d\n", first_symbols);
}
} //UE->mode != loop_through_memory
else
rt_sleep_ns(1000*1000);
pickTime(gotIQs);
// operate on thread sf mod 2
......@@ -1071,7 +1068,7 @@ void *UE_thread(void *arg) {
proc->frame_tx = (proc->frame_tx + 1)%MAX_FRAME_NUMBER;
proc->nr_tti_tx %= NR_NUMBER_OF_SUBFRAMES_PER_FRAME;
}
proc->subframe_tx=subframe_nr + DURATION_RX_TO_TX;
proc->subframe_tx=proc->nr_tti_rx;
proc->timestamp_tx = timestamp+
(DURATION_RX_TO_TX*UE->frame_parms.samples_per_subframe)-
UE->frame_parms.ofdm_symbol_size-UE->frame_parms.nb_prefix_samples0;
......@@ -1107,7 +1104,41 @@ void *UE_thread(void *arg) {
// initStaticTime(lastTime);
// updateTimes(lastTime, &t1, 20000, "Delay between two IQ acquisitions (case 1)");
// pickStaticTime(lastTime);
} //UE->mode != loop_through_memory
else {
proc->nr_tti_rx=subframe_nr;
proc->subframe_rx=subframe_nr;
if(subframe_nr == 0) {
for (th_id=0; th_id < RX_NB_TH; th_id++) {
UE->proc.proc_rxtx[th_id].frame_rx++;
}
}
proc->frame_tx = proc->frame_rx;
proc->nr_tti_tx= subframe_nr + DURATION_RX_TO_TX;
if (proc->nr_tti_tx > NR_NUMBER_OF_SUBFRAMES_PER_FRAME) {
proc->frame_tx = (proc->frame_tx + 1)%MAX_FRAME_NUMBER;
proc->nr_tti_tx %= NR_NUMBER_OF_SUBFRAMES_PER_FRAME;
}
proc->subframe_tx=proc->nr_tti_tx;
printf("Processing subframe %d\n",proc->subframe_rx);
if(UE->if_inst != NULL && UE->if_inst->ul_indication != NULL){
UE->ul_indication.module_id = 0;
UE->ul_indication.gNB_index = 0;
UE->ul_indication.cc_id = 0;
UE->ul_indication.slot = 0; // to be fill
UE->ul_indication.frame = 0; // to be fill
// [TODO] mapping right after NR initial sync
UE->ul_indication.frame = proc->frame_rx;
UE->ul_indication.slot = proc->nr_tti_rx;
UE->if_inst->ul_indication(&UE->ul_indication);
}
phy_procedures_nrUE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay);
getchar();
} // else loop_through_memory
} // start_rx_stream==1
} // UE->is_synchronized==1
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment