#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements.  See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# *      http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# *      contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
#   Valid for Ubuntu18.04
#
#---------------------------------------------------------------------

FROM ran-build:latest AS gnb-build 

WORKDIR /oai-ran

#run build_oai to build the target image
RUN /bin/sh oaienv && \ 
    cd cmake_targets && \
    mkdir -p log && \
    ./build_oai --gNB --ninja -w USRP

#debug
RUN ldconfig -v
RUN ldd /oai-ran/targets/bin/nr-softmodem.Rel15
RUN ls -lst /oai-ran/targets/bin
RUN ls -lst /oai-ran/cmake_targets/ran_build/build/*.so

#start from scratch for target executable
FROM ubuntu:bionic as oai-gnb
ENV DEBIAN_FRONTEND=noninteractive
ENV TZ=Europe
RUN ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone

RUN apt-get update && \
    DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
    DEBIAN_FRONTEND=noninteractive apt-get install --yes \
        software-properties-common \
        libsctp1 \
        libnettle6 \
        libblas3 \
        libatlas3-base \
        libconfig9 \
        openssl \
        net-tools \
        iproute2 \
        iputils-ping \
        libyaml-0-2 && \
    # Install UHD driver from ettus ppa 
    # At time of writing, it is 3.14
    add-apt-repository ppa:ettusresearch/uhd --yes && \
    apt-get update && \
    DEBIAN_FRONTEND=noninteractive apt-get install --yes \
        python \
        libusb-1.0-0 \
        libuhd003 \
        uhd-host && \
    rm -rf /var/lib/apt/lists/*

WORKDIR /opt/oai-gnb/bin
COPY --from=gnb-build /oai-ran/targets/bin/nr-softmodem.Rel15 .

WORKDIR /usr/local/lib/
COPY --from=gnb-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=gnb-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=gnb-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=gnb-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=gnb-build /oai-ran/targets/bin/libcoding.so .
COPY --from=gnb-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libldpc.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libldpc_optim.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libldpc_optim8seg.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libldpc_orig.so .

RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so"
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so"
RUN /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so"
COPY --from=gnb-build /usr/local/lib/libprotobuf-c.so.1 .

RUN ldconfig
#debug
#RUN ldd /opt/oai-gnb/bin/nr-softmodem.Rel15
#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
#RUN ldd /usr/local/lib/libcoding.so
#RUN ldd /usr/local/lib/libparams_libconfig.so
#RUN ldd /usr/local/lib/libdfts.so
#RUN ldd /usr/local/lib/libldpc.so
#RUN ldd /usr/local/lib/libldpc_optim.so
#RUN ldd /usr/local/lib/libldpc_optim8seg.so
#RUN ldd /usr/local/lib/libldpc_orig.so

# Copy the relevant configuration files for gNB
WORKDIR /opt/oai-gnb/etc
COPY --from=gnb-build /oai-ran/ci-scripts/conf_files/gnb.* ./

WORKDIR /opt/oai-gnb
#EXPOSE 2152/udp  # S1U, GTP/UDP
#EXPOSE 22100/tcp # ?
#EXPOSE 36412/udp # S1C, SCTP/UDP
#EXPOSE 36422/udp # X2C, SCTP/UDP
#EXPOSE 50000/udp # IF5 / ORI (control)
#EXPOSE 50001/udp # IF5 / ECPRI (data)

#CMD ["/opt/oai-gnb/bin/nr-softmodem", "-O", "/opt/oai-gnb/etc/gnb.conf"]
#ENTRYPOINT ["/opt/oai-gnb/bin/entrypoint.sh"]
CMD ["sleep", "infinity"]