Merge remote-tracking branch 'remotes/oai/develop-SA-CBRA' into integration_w5GC_CBRA

# Conflicts:
#	openair2/LAYER2/NR_MAC_COMMON/nr_mac.h

ci-scripts/Jenkinsfile-GitLab-Container

+#!/bin/groovy
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+// Location of the executor node
+def nodeExecutor = params.nodeExecutor
+
+// Tags to shorten pipeline duration
+def doMandatoryTests = false
+def doFullTestsuite = false
+
+pipeline {
+  agent {
+    label nodeExecutor
+  }
+  options {
+    disableConcurrentBuilds()
+    timestamps()
+    gitLabConnection('OAI GitLab')
+    ansiColor('xterm')
+  }
+
+  stages {
+    stage ("Verify Parameters") {
+      steps {
+        script {
+          JOB_TIMESTAMP = sh returnStdout: true, script: 'date --utc --rfc-3339=seconds | sed -e "s#+00:00##"'
+          JOB_TIMESTAMP = JOB_TIMESTAMP.trim()
+
+          echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
+          def allParametersPresent = true
+
+          echo '\u2705 \u001B[32mVerify Labels\u001B[0m'
+          if ("MERGE".equals(env.gitlabActionType)) {
+            LABEL_CHECK = sh returnStdout: true, script: 'ci-scripts/checkGitLabMergeRequestLabels.sh --mr-id ' + env.gitlabMergeRequestIid
+            LABEL_CHECK = LABEL_CHECK.trim()
+            if (LABEL_CHECK == 'NONE') {
+              def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Your merge request has none of the mandatory labels:\n\n"
+              message += " - BUILD-ONLY\n"
+              message += " - 4G-LTE\n"
+              message += " - 5G-NR\n"
+              message += " - CI\n\n"
+              message += "Not performing CI due to lack of labels"
+              addGitLabMRComment comment: message
+              error('Not performing CI due to lack of labels')
+            } else if (LABEL_CHECK == 'FULL') {
+              doMandatoryTests = true
+              doFullTestsuite = true
+            } else if (LABEL_CHECK == 'SHORTEN-5G') {
+              doMandatoryTests = true
+            } else {
+              def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): We will perform only build stages on your Merge Request"
+              addGitLabMRComment comment: message
+            }
+          } else {
+            doMandatoryTests = true
+            doFullTestsuite = true
+          }
+        }
+      }
+    }
+    stage ("Verify Guidelines") {
+      steps {
+        echo "Git URL     is ${GIT_URL}"
+        echo "GitLab Act    is ${env.gitlabActionType}"
+        script {
+          if ("MERGE".equals(env.gitlabActionType)) {
+            // since a bit, in push events, gitlabUserEmail is not populated
+            gitCommitAuthorEmailAddr = env.gitlabUserEmail
+            echo "GitLab Usermail is ${gitCommitAuthorEmailAddr}"
+            // GitLab-Jenkins plugin integration is lacking to perform the merge by itself
+            // Doing it manually --> it may have merge conflicts
+            sh "./ci-scripts/doGitLabMerge.sh --src-branch ${env.gitlabSourceBranch} --src-commit ${env.gitlabMergeRequestLastCommit} --target-branch ${env.gitlabTargetBranch} --target-commit ${GIT_COMMIT}"
+          } else {
+            echo "Git Branch    is ${GIT_BRANCH}"
+            echo "Git Commit    is ${GIT_COMMIT}"
+            // since a bit, in push events, gitlabUserEmail is not populated
+            gitCommitAuthorEmailAddr = sh returnStdout: true, script: 'git log -n1 --pretty=format:%ae ${GIT_COMMIT}'
+            gitCommitAuthorEmailAddr = gitCommitAuthorEmailAddr.trim()
+            echo "GitLab Usermail is ${gitCommitAuthorEmailAddr}"
+            sh "git log -n1 --pretty=format:\"%s\" > .git/CI_COMMIT_MSG"
+          }
+        }
+      }
+      post {
+        failure {
+          script {
+            def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Merge Conflicts -- Cannot perform CI"
+            addGitLabMRComment comment: message
+            currentBuild.result = 'FAILURE'
+          }
+        }
+      }
+    }
+    // Build Stages are Mandatory
+    // Later we will add a Ubuntu20 build
+    stage ("Image Building Processes") {
+      parallel {
+        stage ("Ubuntu18 Build") {
+          steps {
+            script {
+              triggerSlaveJob ('RAN-Ubuntu18-Image-Builder', 'Ubuntu18-Images-Build')
+            }
+          }
+          post {
+            always {
+              script {
+                finalizeSlaveJob('RAN-Ubuntu18-Image-Builder')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+              }
+            }
+          }
+        }
+        stage ("RHEL8 Build") {
+          steps {
+            script {
+              triggerSlaveJob ('RAN-RHEL8-Image-Builder', 'RHEL8-Images-Build')
+            }
+          }
+          post {
+            always {
+              script {
+                finalizeSlaveJob('RAN-RHEL8-Image-Builder')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+              }
+            }
+          }
+        }
+      }
+    }
+  }
+  post {
+    always {
+      script {
+        emailext attachmentsPattern: '*results*.html',
+           body: '''Hi,
+
+Here are attached HTML report files for $PROJECT_NAME - Build # $BUILD_NUMBER - $BUILD_STATUS!
+
+Regards,
+OAI CI Team''',
+           replyTo: 'no-reply@openairinterface.org',
+           subject: '$PROJECT_NAME - Build # $BUILD_NUMBER - $BUILD_STATUS!',
+           to: gitCommitAuthorEmailAddr
+
+        if (fileExists('.git/CI_COMMIT_MSG')) {
+          sh "rm -f .git/CI_COMMIT_MSG"
+        }
+      }
+    }
+    success {
+      script {
+        def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): passed (" + BUILD_URL + ")"
+        if ("MERGE".equals(env.gitlabActionType)) {
+          echo "This is a MERGE event"
+          addGitLabMRComment comment: message
+        }
+      }
+    }
+    failure {
+      script {
+        def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): failed (" + BUILD_URL + ")"
+        if ("MERGE".equals(env.gitlabActionType)) {
+          echo "This is a MERGE event"
+          addGitLabMRComment comment: message
+        }
+      }
+    }
+  }
+}
+
+// ----  Slave Job functions
+
+def triggerSlaveJob (jobName, gitlabStatusName) {
+  // Workaround for the "cancelled" GitLab pipeline notification
+  // The slave job is triggered with the propagate false so the following commands are executed
+  // Its status is now PASS/SUCCESS from a stage pipeline point of view
+  // localStatus variable MUST be analyzed to properly assess the status
+  localStatus = build job: jobName,
+    parameters: [
+      string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+      string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
+      string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
+      booleanParam(name: 'eNB_mergeRequest', value: "MERGE".equals(env.gitlabActionType)),
+      string(name: 'eNB_TargetBranch', value: String.valueOf(env.gitlabTargetBranch))
+    ], propagate: false
+  localResult = localStatus.getResult()
+  echo "${jobName} Slave Job status is ${localResult}"
+  gitlabCommitStatus(name: gitlabStatusName) {
+    if (localStatus.resultIsBetterOrEqualTo('SUCCESS')) {
+       echo "${jobName} Slave Job is OK"
+    } else {
+       echo "${jobName} Slave Job is KO"
+       sh "ci-scripts/fail.sh"
+    }
+  }
+}
+
+def triggerSlaveJobNoGitLab (jobName) {
+  // Workaround for the "cancelled" GitLab pipeline notification
+  // The slave job is triggered with the propagate false so the following commands are executed
+  // Its status is now PASS/SUCCESS from a stage pipeline point of view
+  // localStatus variable MUST be analyzed to properly assess the status
+  localStatus = build job: jobName,
+    parameters: [
+      string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+      string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
+      string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
+      booleanParam(name: 'eNB_mergeRequest', value: "MERGE".equals(env.gitlabActionType)),
+      string(name: 'eNB_TargetBranch', value: String.valueOf(env.gitlabTargetBranch))
+    ], propagate: false
+  localResult = localStatus.getResult()
+  echo "${jobName} Slave Job status is ${localResult}"
+  if (localStatus.resultIsBetterOrEqualTo('SUCCESS')) {
+     echo "${jobName} Slave Job is OK"
+  } else {
+     echo "${jobName} Slave Job is KO"
+     sh "ci-scripts/fail.sh"
+  }
+}
+
+def finalizeSlaveJob(jobName) {
+  // In case of any non-success, we are retrieving the HTML report of the last completed
+  // slave job. The only drop-back is that we may retrieve the HTML report of a previous build
+  fileName = "test_results-${jobName}.html"
+  if (!fileExists(fileName)) {
+    copyArtifacts(projectName: jobName,
+      filter: 'test_results*.html',
+      selector: lastCompleted())
+    if (fileExists(fileName)) {
+      sh "sed -i -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' ${fileName}"
+      archiveArtifacts artifacts: fileName
+    }
+  }
+}

ci-scripts/Jenkinsfile-tmp-multi-enb-benetel

+#!/bin/groovy
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+// Template Jenkins Declarative Pipeline script to run Test w/ RF HW
+
+// Location of the python executor node shall be in the same subnet as the others servers
+def pythonExecutor = params.pythonExecutor
+
+// Location of the test XML file to be run
+def testXMLFile = params.pythonTestXmlFile
+def mainPythonAllXmlFiles = ""
+def buildStageStatus = true
+
+// Name of the test stage
+def testStageName = params.pipelineTestStageName
+
+// Name of the phone resource
+def ciSmartPhonesResource1 = params.SmartPhonesResource1
+def ciSmartPhonesResource2 = params.SmartPhonesResource2
+
+// Global Parameters. Normally they should be populated when the master job
+// triggers the slave job with parameters
+def eNB_Repository
+def eNB_Branch
+def eNB_CommitID
+def eNB_AllowMergeRequestProcess
+def eNB_TargetBranch
+
+pipeline {
+    agent {
+        label pythonExecutor
+    }
+    options {
+        disableConcurrentBuilds()
+        ansiColor('xterm')
+        lock(extra: [[resource: ciSmartPhonesResource2]], resource: ciSmartPhonesResource1)
+    }
+    stages {
+        stage("Build Init") {
+            steps {
+                // update the build name and description
+                buildName "${params.eNB_MR}"
+                buildDescription "Branch : ${params.eNB_Branch}"
+            }
+        }
+        stage ("Verify Parameters") {
+            steps {
+                script {
+                    echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
+                    def allParametersPresent = true
+
+                    // It is already to late to check it
+                    if (params.pythonExecutor != null) {
+                        echo "eNB CI executor node  :   ${pythonExecutor}"
+                    }
+                    // If not present picking a default Stage Name
+                    if (params.pipelineTestStageName == null) {
+                        // picking default
+                        testStageName = 'Template Test Stage'
+                    }
+
+                    if (params.SmartPhonesResource1 == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.SmartPhonesResource2 == null) {
+                        allParametersPresent = false
+                    }
+                    // 1st eNB parameters
+                    if (params.eNB_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // 2nd eNB parameters
+                    if (params.eNB1_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB1_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB1_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // 3rd eNB parameters
+                    if (params.eNB2_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB2_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB2_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // the following 4 parameters should be pushed by the master trigger
+                    // if not present, take the job GIT variables (used for developing)
+                    if (params.eNB_Repository == null) {
+                        eNB_Repository = env.GIT_URL
+                    } else {
+                        eNB_Repository = params.eNB_Repository
+                    }
+                    echo "eNB_Repository        :   ${eNB_Repository}"
+                    if (params.eNB_Branch == null) {
+                        eNB_Branch = env.GIT_BRANCH
+                    } else {
+                        eNB_Branch = params.eNB_Branch
+                    }
+                    echo "eNB_Branch            :   ${eNB_Branch}"
+                    if (params.eNB_CommitID == null) {
+                        eNB_CommitID = env.GIT_COMMIT
+                    } else {
+                        eNB_CommitID = params.eNB_CommitID
+                    }
+                    echo "eNB_CommitID          :   ${eNB_CommitID}"
+                    if (params.eNB_AllowMergeRequestProcess!= null) {
+                        eNB_AllowMergeRequestProcess = params.eNB_AllowMergeRequestProcess
+                        if (eNB_AllowMergeRequestProcess) {
+                            if (params.eNB_TargetBranch != null) {
+                                eNB_TargetBranch = params.eNB_TargetBranch
+                            } else {
+                                eNB_TargetBranch = 'develop'
+                            }
+                            echo "eNB_TargetBranch      :   ${eNB_TargetBranch}"
+                        }
+                    }
+
+                    if (params.EPC_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_Type == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_Credentials == null) {
+                        allParametersPresent = false
+                    }
+
+                    if (params.ADB_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.ADB_Credentials == null) {
+                        allParametersPresent = false
+                    }
+
+                    if (allParametersPresent) {
+                        echo "All parameters are present"
+                        if (eNB_AllowMergeRequestProcess) {
+                            sh "git fetch"
+                            sh "./ci-scripts/doGitLabMerge.sh --src-branch ${eNB_Branch} --src-commit ${eNB_CommitID} --target-branch ${eNB_TargetBranch} --target-commit latest"
+                        } else {
+                            sh "git fetch"
+                            sh "git checkout -f ${eNB_CommitID}"
+                        }
+                    } else {
+                        echo "Some parameters are missing"
+                        sh "./ci-scripts/fail.sh"
+                    }
+                }
+            }
+        }
+        stage ("Build and Test") {
+            steps {
+                script {
+                    dir ('ci-scripts') {
+                        echo "\u2705 \u001B[32m${testStageName}\u001B[0m"
+                        // If not present picking a default XML file
+                        if (params.pythonTestXmlFile == null) {
+                            // picking default
+                            testXMLFile = 'xml_files/enb_usrpB210_band7_50PRB.xml'
+                            echo "Test XML file(default):   ${testXMLFile}"
+                            mainPythonAllXmlFiles += "--XMLTestFile=" + testXMLFile + " "
+                        } else {
+                            String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+                            for (xmlFile in myXmlTestSuite) {
+                                if (fileExists(xmlFile)) {
+                                    mainPythonAllXmlFiles += "--XMLTestFile=" + xmlFile + " "
+                                    echo "Test XML file         :   ${xmlFile}"
+                                }
+                            }
+                        }
+                        withCredentials([
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB1_Credentials}", usernameVariable: 'eNB1_Username', passwordVariable: 'eNB1_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB2_Credentials}", usernameVariable: 'eNB2_Username', passwordVariable: 'eNB2_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
+                        ]) {
+                            sh "python3 main.py --mode=InitiateHtml --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} ${mainPythonAllXmlFiles}"
+                            String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+                            for (xmlFile in myXmlTestSuite) {
+                                if (fileExists(xmlFile)) {
+                                    try {
+                                        sh "python3 main.py --mode=TesteNB --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --eNB1IPAddress=${params.eNB1_IPAddress} --eNB1UserName=${eNB1_Username} --eNB1Password=${eNB1_Password} --eNB1SourceCodePath=${params.eNB1_SourceCodePath} --eNB2IPAddress=${params.eNB2_IPAddress} --eNB2UserName=${eNB2_Username} --eNB2Password=${eNB2_Password} --eNB2SourceCodePath=${params.eNB2_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=${xmlFile}"
+                                    } catch (Exception e) {
+                                        currentBuild.result = 'FAILURE'
+                                        buildStageStatus = false
+                                    }
+                                }
+                            }
+                            sh "python3 main.py --mode=FinalizeHtml --finalStatus=${buildStageStatus} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
+                        }
+                    }
+                }
+            }
+        }
+        stage('Log Collection') {
+            parallel {
+                stage('Log Collection (eNB - Build)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (eNB - Build)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollectBuild --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (eNB - Build)\u001B[0m'
+                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/build.log.zip ./build.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("build.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "build.log.${env.BUILD_ID}.zip"
+                            }
+                        }
+                    }
+                }
+                stage('Log Collection (eNB - Run)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (eNB - Run)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollecteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (eNB - Run)\u001B[0m'
+                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/enb.log.zip ./enb.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("enb.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "enb.log.${env.BUILD_ID}.zip"
+                            }
+                            if(fileExists("ci-scripts/test_results.html")) {
+                                sh "mv ci-scripts/test_results.html test_results-${JOB_NAME}.html"
+                                sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_STAGE_NAME#${testStageName}#' test_results-${JOB_NAME}.html"
+                                archiveArtifacts "test_results-${JOB_NAME}.html"
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    post {
+        always {
+            script {
+                if (params.pipelineZipsConsoleLog != null) {
+                    if (params.pipelineZipsConsoleLog) {
+                        echo "Archiving Jenkins console log"
+                        sh "wget --no-check-certificate --no-proxy ${env.JENKINS_URL}/job/${env.JOB_NAME}/${env.BUILD_ID}/consoleText -O consoleText.log || true"
+                        sh "zip -m consoleText.log.${env.BUILD_ID}.zip consoleText.log || true"
+                        if(fileExists("consoleText.log.${env.BUILD_ID}.zip")) {
+                            archiveArtifacts "consoleText.log.${env.BUILD_ID}.zip"
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

ci-scripts/Jenkinsfile-tmp-multi-enb-nsa

@@ -34,8 +34,9 @@ def buildStageStatus = true
 def testStageName = params.pipelineTestStageName
 
 // Name of the phone resource
-def ciSmartPhoneResource1 = params.smartphonesResource1
-def ciSmartPhoneResource2 = params.smartphonesResource2
+def ciSmartPhonesResource1 = params.SmartPhonesResource1
+def ciSmartPhonesResource2 = params.SmartPhonesResource2
+def ciSmartPhonesResource3 = params.SmartPhonesResource3
 
 // Global Parameters. Normally they should be populated when the master job
 // triggers the slave job with parameters
@@ -52,7 +53,7 @@ pipeline {
     options {
         disableConcurrentBuilds()
         ansiColor('xterm')
-        lock(extra: [[resource: ciSmartPhoneResource2]], resource: ciSmartPhoneResource1)
+        lock(extra: [[resource: ciSmartPhonesResource2],[resource: ciSmartPhonesResource3]], resource: ciSmartPhonesResource1)
     }
     stages {
         stage("Build Init") {
@@ -78,10 +79,13 @@ pipeline {
                         testStageName = 'Template Test Stage'
                     }
 
-                    if (params.smartphonesResource1 == null) {
+                    if (params.SmartPhonesResource1 == null) {
                         allParametersPresent = false
                     }
-                    if (params.smartphonesResource2 == null) {
+                    if (params.SmartPhonesResource2 == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.SmartPhonesResource3== null) {
                         allParametersPresent = false
                     }
                     // 1st eNB parameters

ci-scripts/Jenkinsfile-tmp-ran

@@ -241,6 +241,10 @@ pipeline {
         stage ("Terminate") {
             parallel {
                 stage('Terminate UE') {
+                    // Bypassing this stage if there are no abd server defined
+                    when {
+                      expression { params.ADB_IPAddress != "none" }
+                    }
                     steps {
                         echo '\u2705 \u001B[32mTerminate UE\u001B[0m'
                         withCredentials([
@@ -275,6 +279,10 @@ pipeline {
                     }
                 }
                 stage('Terminate SPGW') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         echo '\u2705 \u001B[32mTerminate SPGW\u001B[0m'
                         withCredentials([
@@ -292,6 +300,10 @@ pipeline {
                     }
                 }
                 stage('Terminate MME') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         echo '\u2705 \u001B[32mTerminate MME\u001B[0m'
                         withCredentials([
@@ -309,6 +321,10 @@ pipeline {
                     }
                 }
                 stage('Terminate HSS') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         echo '\u2705 \u001B[32mTerminate HSS\u001B[0m'
                         withCredentials([
@@ -371,6 +387,10 @@ pipeline {
                     }
                 }
                 stage('Log Collection (SPGW)') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         withCredentials([
                              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
@@ -389,6 +409,10 @@ pipeline {
                     }
                 }
                 stage('Log Collection (MME)') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         withCredentials([
                              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
@@ -407,6 +431,10 @@ pipeline {
                     }
                 }
                 stage('Log Collection (HSS)') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         withCredentials([
                              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
@@ -425,6 +453,10 @@ pipeline {
                     }
                 }
                 stage('Log Collection (Ping)') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         withCredentials([
                              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
@@ -443,6 +475,10 @@ pipeline {
                     }
                 }
                 stage('Log Collection (Iperf)') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         withCredentials([
                              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
@@ -482,7 +518,7 @@ pipeline {
         // Making sure that we really shutdown every thing before leaving
         failure {
             script {
-                if (!termStatusArray[termUE]) {
+                if ((!termStatusArray[termUE]) && (params.ADB_IPAddress != "none")) {
                     withCredentials([
                         [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
                     ]) {
@@ -496,21 +532,21 @@ pipeline {
                         sh "python3 ci-scripts/main.py --mode=TerminateeNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
                     }
                 }
-                if (!termStatusArray[termSPGW]) {
+                if ((!termStatusArray[termSPGW]) && (params.EPC_IPAddress != "none")) {
                     withCredentials([
                         [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
                     ]) {
                         sh "python3 ci-scripts/main.py --mode=TerminateSPGW --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
                     }
                 }
-                if (!termStatusArray[termMME]) {
+                if ((!termStatusArray[termMME]) && (params.EPC_IPAddress != "none")) {
                     withCredentials([
                         [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
                     ]) {
                         sh "python3 ci-scripts/main.py --mode=TerminateMME --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
                     }
                 }
-                if (!termStatusArray[termHSS]) {
+                if ((!termStatusArray[termHSS]) && (params.EPC_IPAddress != "none")) {
                     withCredentials([
                         [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
                     ]) {

ci-scripts/Jenkinsfile-trig-nsa

@@ -33,19 +33,21 @@ pipeline {
         label pythonExecutor
     }
     stages {
-        stage ("NSA Test Loop") {
+        stage ("Launcher") {
             steps {
                 script {     
+                    //retrieve MR that are opened nd with tag READY_TO_BE_MERGED             
                     MR_LIST= sh returnStdout: true, script: 'curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests?state=opened&per_page=100&labels=READY_TO_BE_MERGED" | jq ".[].iid" || true '
                     echo "List of selected MR:\n${MR_LIST}" 
                     def MR_ARRAY = MR_LIST.split('\n') 
+                    //for every selected MR, retrieve the branch name and the latest commit              
                     for (MR in MR_ARRAY) {
                         SRC_BRANCH=sh returnStdout: true, script: """curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests/${MR}" | jq ".source_branch" || true """
                         SRC_BRANCH=SRC_BRANCH.trim()
                         COMMIT_ID=sh returnStdout: true, script:  """curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests/${MR}" | jq ".sha" || true """
                         COMMIT_ID=COMMIT_ID.trim()
                         echo "Testing NSA on : ${MR} ${SRC_BRANCH} ${COMMIT_ID}"
-                        //calling sub job
+                        //calling NSA sub job
                         build job: "RAN-CI-NSA-B210", wait : false, propagate : false, parameters: [
                             string(name: 'eNB_MR', value: String.valueOf(MR)),                          
                             string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)),
@@ -53,6 +55,14 @@ pipeline {
                             string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)),
                             booleanParam(name: 'eNB_AllowMergeRequestProcess', value: Boolean.valueOf(ALLOW_MERGE))
                         ]
+                        //calling Benetel sub job
+                        build job: "RAN-CI-BENETEL", wait : false, propagate : false, parameters: [
+                            string(name: 'eNB_MR', value: String.valueOf(MR)),                          
+                            string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)),
+                            string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)),
+                            string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)),
+                            booleanParam(name: 'eNB_AllowMergeRequestProcess', value: Boolean.valueOf(ALLOW_MERGE))
+                        ]
                     }
                 }                                  
             }   

ci-scripts/cls_containerize.py

@@ -35,6 +35,7 @@ import sys              # arg
 import re               # reg
 import logging
 import os
+import shutil
 import time
 from multiprocessing import Process, Lock, SimpleQueue
 from zipfile import ZipFile
@@ -124,7 +125,7 @@ class Containerize():
 			self.cli = 'docker'
 			self.dockerfileprefix = '.ubuntu18'
 		elif self.host == 'Red Hat':
-			self.cli = 'podman'
+			self.cli = 'sudo podman'
 			self.dockerfileprefix = '.rhel8.2'
 
 		imageNames = []
@@ -173,6 +174,7 @@ class Containerize():
 		# if the branch is not develop, then it is a merge request and we need to do 
 		# the potential merge. Note that merge conflicts should already been checked earlier
 		imageTag = 'develop'
+		sharedTag = 'develop'
 		if (self.ranAllowMerge):
 			imageTag = 'ci-temp'
 			if self.ranTargetBranch == '':
@@ -189,37 +191,22 @@ class Containerize():
 			mySSH.command('sudo cp /etc/rhsm/ca/redhat-uep.pem tmp/ca/', '\$', 5)
 			mySSH.command('sudo cp /etc/pki/entitlement/*.pem tmp/entitlement/', '\$', 5)
 
-		#mySSH.close()
-		#return 0
 		sharedimage = 'ran-build'
 		# Let's remove any previous run artifacts if still there
-		mySSH.command(self.cli + ' image prune --force', '\$', 5)
-		mySSH.command(self.cli + ' image rm ' + sharedimage + ':' + imageTag, '\$', 5)
+		mySSH.command(self.cli + ' image prune --force', '\$', 30)
+		if (not self.ranAllowMerge):
+			mySSH.command(self.cli + ' image rm ' + sharedimage + ':' + sharedTag, '\$', 30)
 		for image,pattern in imageNames:
-			mySSH.command(self.cli + ' image rm ' + image + ':' + imageTag, '\$', 5)
-		# Build the shared image
-		mySSH.command(self.cli + ' build --target ' + sharedimage + ' --tag ' + sharedimage + ':' + imageTag + ' --file docker/Dockerfile.ran' + self.dockerfileprefix + ' --build-arg NEEDED_GIT_PROXY="http://proxy.eurecom.fr:8080" . > cmake_targets/log/ran-build.log 2>&1', '\$', 1600)
-		# Build the target image(s)
-		previousImage = sharedimage + ':' + imageTag
-		danglingShaOnes=[]
-		for image,pattern in imageNames:
-			# the archived Dockerfiles have "ran-build:latest" as base image
-			# we need to update them with proper tag
-			mySSH.command('sed -i -e "s#' + sharedimage + ':latest#' + sharedimage + ':' + imageTag + '#" docker/Dockerfile.' + pattern + self.dockerfileprefix, '\$', 5)
-			mySSH.command(self.cli + ' build --target ' + image + ' --tag ' + image + ':' + imageTag + ' --file docker/Dockerfile.' + pattern + self.dockerfileprefix + ' . > cmake_targets/log/' + image + '.log 2>&1', '\$', 1200)
-			# Retrieving the dangling image(s) for the log collection
-			mySSH.command(self.cli + ' images --filter "dangling=true" --filter "since=' + previousImage + '" -q | sed -e "s#^#sha=#"', '\$', 5)
-			result = re.search('sha=(?P<imageShaOne>[a-zA-Z0-9\-\_]+)', mySSH.getBefore())
-			if result is not None:
-				danglingShaOnes.append((image, result.group('imageShaOne')))
-			previousImage = image + ':' + imageTag
+			mySSH.command(self.cli + ' image rm ' + image + ':' + imageTag, '\$', 30)
 
-		imageTag = 'ci-temp'
-		# First verify if images were properly created.
+		# Build the shared image only on Push Events (not on Merge Requests)
+		if (not self.ranAllowMerge):
+			mySSH.command(self.cli + ' build --target ' + sharedimage + ' --tag ' + sharedimage + ':' + sharedTag + ' --file docker/Dockerfile.ran' + self.dockerfileprefix + ' --build-arg NEEDED_GIT_PROXY="http://proxy.eurecom.fr:8080" . > cmake_targets/log/ran-build.log 2>&1', '\$', 1600)
+		# First verify if the shared image was properly created.
 		status = True
-		mySSH.command(self.cli + ' image inspect --format=\'Size = {{.Size}} bytes\' ' + sharedimage + ':' + imageTag, '\$', 5)
-		if mySSH.getBefore().count('No such object') != 0:
-			logging.error('Could not build properly ran-build')
+		mySSH.command(self.cli + ' image inspect --format=\'Size = {{.Size}} bytes\' ' + sharedimage + ':' + sharedTag, '\$', 5)
+		if mySSH.getBefore().count('o such image') != 0:
+			logging.error('\u001B[1m Could not build properly ran-build\u001B[0m')
 			status = False
 		else:
 			result = re.search('Size *= *(?P<size>[0-9\-]+) *bytes', mySSH.getBefore())
@@ -240,11 +227,40 @@ class Containerize():
 						self.allImagesSize['ran-build'] = str(round(imageSize,1)) + ' Gbytes'
 			else:
 				logging.debug('ran-build size is unknown')
+		# If the shared image failed, no need to continue
+		if not status:
+			# Recover the name of the failed container?
+			mySSH.command(self.cli + ' ps --quiet --filter "status=exited" -n1 | xargs ' + self.cli + ' rm -f', '\$', 5)
+			mySSH.command(self.cli + ' image prune --force', '\$', 30)
+			mySSH.close()
+			logging.error('\u001B[1m Building OAI Images Failed\u001B[0m')
+			HTML.CreateHtmlTestRow(self.imageKind, 'KO', CONST.ALL_PROCESSES_OK)
+			HTML.CreateHtmlTabFooter(False)
+			sys.exit(1)
+		else:
+			# Recover build logs, for the moment only possible when build is successful
+			mySSH.command(self.cli + ' create --name test ' + sharedimage + ':' + sharedTag, '\$', 5)
+			mySSH.command('mkdir -p cmake_targets/log/ran-build', '\$', 5)
+			mySSH.command(self.cli + ' cp test:/oai-ran/cmake_targets/log/. cmake_targets/log/ran-build', '\$', 5)
+			mySSH.command(self.cli + ' rm -f test', '\$', 5)
+
+		# Build the target image(s)
 		for image,pattern in imageNames:
+			# the archived Dockerfiles have "ran-build:latest" as base image
+			# we need to update them with proper tag
+			mySSH.command('sed -i -e "s#' + sharedimage + ':latest#' + sharedimage + ':' + sharedTag + '#" docker/Dockerfile.' + pattern + self.dockerfileprefix, '\$', 5)
+			mySSH.command(self.cli + ' build --target ' + image + ' --tag ' + image + ':' + imageTag + ' --file docker/Dockerfile.' + pattern + self.dockerfileprefix + ' . > cmake_targets/log/' + image + '.log 2>&1', '\$', 1200)
+			# split the log
+			mySSH.command('mkdir -p cmake_targets/log/' + image, '\$', 5)
+			mySSH.command('python3 ci-scripts/docker_log_split.py --logfilename=cmake_targets/log/' + image + '.log', '\$', 5)
+			# checking the status of the build
 			mySSH.command(self.cli + ' image inspect --format=\'Size = {{.Size}} bytes\' ' + image + ':' + imageTag, '\$', 5)
-			if mySSH.getBefore().count('No such object') != 0:
-				logging.error('Could not build properly ' + image)
+			if mySSH.getBefore().count('o such image') != 0:
+				logging.error('\u001B[1m Could not build properly ' + image + '\u001B[0m')
 				status = False
+				# Here we should check if the last container corresponds to a failed command and destroy it
+				mySSH.command(self.cli + ' ps --quiet --filter "status=exited" -n1 | xargs ' + self.cli + ' rm -f', '\$', 5)
+				self.allImagesSize[image] = 'N/A -- Build Failed'
 			else:
 				result = re.search('Size *= *(?P<size>[0-9\-]+) *bytes', mySSH.getBefore())
 				if result is not None:
@@ -264,36 +280,24 @@ class Containerize():
 							self.allImagesSize[image] = str(round(imageSize,1)) + ' Gbytes'
 				else:
 					logging.debug('ran-build size is unknown')
-		if not status:
-			mySSH.close()
-			logging.error('\u001B[1m Building OAI Images Failed\u001B[0m')
-			HTML.CreateHtmlTestRow(self.imageKind, 'KO', CONST.ALL_PROCESSES_OK)
-			#HTML.CreateHtmlNextTabHeaderTestRow(self.collectInfo, self.allImagesSize)
-			HTML.CreateHtmlTabFooter(False)
-			sys.exit(1)
+					self.allImagesSize[image] = 'unknown'
+			# Now pruning dangling images in between target builds
+			mySSH.command(self.cli + ' image prune --force', '\$', 30)
 
-		# Recover build logs, for the moment only possible when build is successful
-		mySSH.command(self.cli + ' create --name test ' + sharedimage + ':' + imageTag, '\$', 5)
-		mySSH.command('mkdir -p cmake_targets/log/ran-build', '\$', 5)
-		mySSH.command(self.cli + ' cp test:/oai-ran/cmake_targets/log/. cmake_targets/log/ran-build', '\$', 5)
-		mySSH.command(self.cli + ' rm -f test', '\$', 5)
-		for image,shaone in danglingShaOnes:
-			mySSH.command('mkdir -p cmake_targets/log/' + image, '\$', 5)
-			mySSH.command(self.cli + ' create --name test ' + shaone, '\$', 5)
-			mySSH.command(self.cli + ' cp test:/oai-ran/cmake_targets/log/. cmake_targets/log/' + image, '\$', 5)
-			mySSH.command(self.cli + ' rm -f test', '\$', 5)
-		mySSH.command(self.cli + ' image prune --force', '\$', 5)
-		mySSH.command('cd cmake_targets', '\$', 5)
+		# Analyzing the logs
+		mySSH.command('cd ' + lSourcePath + '/cmake_targets', '\$', 5)
 		mySSH.command('mkdir -p build_log_' + self.testCase_id, '\$', 5)
 		mySSH.command('mv log/* ' + 'build_log_' + self.testCase_id, '\$', 5)
-		#mySSH.close()
 
-		mySSH.command('cd /tmp/CI-eNB/cmake_targets', '\$', 5)
+		mySSH.command('cd ' + lSourcePath + '/cmake_targets', '\$', 5)
+		mySSH.command('rm -f build_log_' + self.testCase_id + '.zip || true', '\$', 5)
 		if (os.path.isfile('./build_log_' + self.testCase_id + '.zip')):
 			os.remove('./build_log_' + self.testCase_id + '.zip')
+		if (os.path.isdir('./build_log_' + self.testCase_id)):
+			shutil.rmtree('./build_log_' + self.testCase_id)
 		mySSH.command('zip -r -qq build_log_' + self.testCase_id + '.zip build_log_' + self.testCase_id, '\$', 5)
 		mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/build_log_' + self.testCase_id + '.zip', '.')
-		#mySSH.command('rm -f build_log_' + self.testCase_id + '.zip','\$', 5)
+		mySSH.command('rm -f build_log_' + self.testCase_id + '.zip','\$', 5)
 		mySSH.close()
 		ZipFile('build_log_' + self.testCase_id + '.zip').extractall('.')
 
@@ -328,9 +332,16 @@ class Containerize():
 				files[fil] = errorandwarnings
 			self.collectInfo[image] = files
 		
+		if status:
 			logging.info('\u001B[1m Building OAI Image(s) Pass\u001B[0m')
 			HTML.CreateHtmlTestRow(self.imageKind, 'OK', CONST.ALL_PROCESSES_OK)
 			HTML.CreateHtmlNextTabHeaderTestRow(self.collectInfo, self.allImagesSize)
+		else:
+			logging.error('\u001B[1m Building OAI Images Failed\u001B[0m')
+			HTML.CreateHtmlTestRow(self.imageKind, 'KO', CONST.ALL_PROCESSES_OK)
+			HTML.CreateHtmlNextTabHeaderTestRow(self.collectInfo, self.allImagesSize)
+			HTML.CreateHtmlTabFooter(False)
+			sys.exit(1)
 
 	def DeployObject(self, HTML, EPC):
 		if self.eNB_serverId[self.eNB_instance] == '0':

ci-scripts/conf_files/benetel-4g.conf

+Active_eNBs = ( "eNB-Eurecom-LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    # real_time choice in {hard, rt-preempt, no}
+    real_time       =  "no";
+
+    ////////// Identification parameters:
+    eNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_ENB";
+
+    eNB_name  =  "eNB-Eurecom-LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 222; mnc = 01; mnc_length = 2; } );
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    component_carriers = (
+      {
+      node_function             = "NGFI_RCC_IF4p5";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type					      = "FDD";
+      tdd_config 					      = 3;
+      tdd_config_s            			      = 0;
+      prefix_type             			      = "NORMAL";
+      eutra_band              			      = 7;
+      downlink_frequency      			      = 2655000000L;
+      uplink_frequency_offset 			      = -120000000;
+      Nid_cell					      = 0;
+      N_RB_DL                 			      = 100;
+      Nid_cell_mbsfn          			      = 0;
+      nb_antenna_ports                                = 1;
+      nb_antennas_tx          			      = 1;
+      nb_antennas_rx          			      = 1;
+      tx_gain                                            = 90;
+      rx_gain                                            = 125;
+      pbch_repetition                                 = "FALSE";
+      prach_root              			      = 0;
+      prach_config_index      			      = 0;
+      prach_high_speed        			      = "DISABLE";
+      prach_zero_correlation  			      = 1;
+      prach_freq_offset       			      = 90;
+      pucch_delta_shift       			      = 1;
+      pucch_nRB_CQI           			      = 0;
+      pucch_nCS_AN            			      = 0;
+      pucch_n1_AN             			      = 0;
+      pdsch_referenceSignalPower 			      = -10;
+      pdsch_p_b                  			      = 0;
+      pusch_n_SB                 			      = 1;
+      pusch_enable64QAM          			      = "DISABLE";
+      pusch_hoppingMode                                  = "interSubFrame";
+      pusch_hoppingOffset                                = 0;
+      pusch_groupHoppingEnabled  			      = "ENABLE";
+      pusch_groupAssignment      			      = 0;
+      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
+      pusch_nDMRS1                                       = 1;
+      phich_duration                                     = "NORMAL";
+      phich_resource                                     = "ONESIXTH";
+      srs_enable                                         = "DISABLE";
+      /*  srs_BandwidthConfig                                =;
+      srs_SubframeConfig                                 =;
+      srs_ackNackST                                      =;
+      srs_MaxUpPts                                       =;*/
+
+      pusch_p0_Nominal                                   = -96;
+      pusch_alpha                                        = "AL1";
+      pucch_p0_Nominal                                   = -104;
+      msg3_delta_Preamble                                = 6;
+      pucch_deltaF_Format1                               = "deltaF2";
+      pucch_deltaF_Format1b                              = "deltaF3";
+      pucch_deltaF_Format2                               = "deltaF0";
+      pucch_deltaF_Format2a                              = "deltaF0";
+      pucch_deltaF_Format2b		    	      = "deltaF0";
+
+      rach_numberOfRA_Preambles                          = 64;
+      rach_preamblesGroupAConfig                         = "DISABLE";
+      /*
+      rach_sizeOfRA_PreamblesGroupA                      = ;
+      rach_messageSizeGroupA                             = ;
+      rach_messagePowerOffsetGroupB                      = ;
+      */
+      rach_powerRampingStep                              = 4;
+      rach_preambleInitialReceivedTargetPower            = -108;
+      rach_preambleTransMax                              = 10;
+      rach_raResponseWindowSize                          = 10;
+      rach_macContentionResolutionTimer                  = 48;
+      rach_maxHARQ_Msg3Tx                                = 4;
+
+      pcch_default_PagingCycle                           = 128;
+      pcch_nB                                            = "oneT";
+      bcch_modificationPeriodCoeff			      = 2;
+      ue_TimersAndConstants_t300			      = 1000;
+      ue_TimersAndConstants_t301			      = 1000;
+      ue_TimersAndConstants_t310			      = 1000;
+      ue_TimersAndConstants_t311			      = 10000;
+      ue_TimersAndConstants_n310			      = 20;
+      ue_TimersAndConstants_n311			      = 1;
+      ue_TransmissionMode                                    = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal";
+      rxPool_sc_Period                                       = "sf40";
+      rxPool_data_CP_Len                                     = "normal";
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
+/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
+      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                               = 0;
+      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
+*/
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      //SSB central frequency of NR secondary cell group (for ENDC NSA) 
+      nr_scg_ssb_freq	      	    	      	   	      	      = 640000;	
+      }
+    );
+
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    enable_measurement_reports = "yes";
+
+    ///X2
+    enable_x2 = "yes";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES :
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "127.0.0.1";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+	{
+	num_cc = 1;
+	tr_s_preference = "local_L1";
+	tr_n_preference = "local_RRC";
+	phy_test_mode = 0;
+        puSch10xSnr     =  160;
+        puCch10xSnr     =  160;
+        }
+);
+
+L1s = (
+      {
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        prach_dtx_threshold = 150;
+      }
+);
+
+RUs = (
+    {
+        //local_if_name  = "enp129s0f0";
+        local_if_name  = "dpdk";
+        sdr_addrs      = "softmodem -m 2048 -l 35 -n 2 -b 0000:81:00.3 --proc-type auto --file-prefix ggg -- -p 0x1";
+        #sdr_addrs      = "softmodem -l 8 -n 2 -- -p 0x2";
+        #remote_address = "127.0.0.2";
+        #local_address  = "127.0.0.1";
+        #local_portc    = 50000;
+        #remote_portc   = 50000;
+        #local_portd    = 50001;
+        #remote_portd   = 50001;
+        local_rf       = "no"
+        tr_preference  = "raw_if4p5"
+        nb_tx          = 1
+        nb_rx          = 1
+        att_tx         = 0
+        att_rx         = 0;
+        eNB_instances  = [0];
+    }
+);
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    #parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+NETWORK_CONTROLLER :
+{
+    FLEXRAN_ENABLED        = "no";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_PORT           = 2210;
+    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+    FLEXRAN_AWAIT_RECONF   = "no";
+};
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+    };

ci-scripts/conf_files/benetel-5g.conf

+Active_gNBs = ( "gNB-Eurecom-5GNRBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "gNB-Eurecom-5GNRBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+
+    plmn_list = ({mcc = 222; mnc = 01; mnc_length = 2;});	 
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    ssb_SubcarrierOffset                                      = 31; //0;
+    pdsch_AntennaPorts                                        = 1;
+    #pusch_TargetSNRx10                                        = 200;
+    #pucch_TargetSNRx10                                        = 200;
+    pusch_TargetSNRx10                                        = 200;
+    pucch_TargetSNRx10                                        = 200;
+	
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is is the central frequency of SSB 
+      absoluteFrequencySSB                                          = 640000; //641272
+      dl_frequencyBand                                                 = 78;
+      # the carrier frequency is assumed to be in the middle of the carrier, i.e. dl_absoluteFrequencyPointA_kHz + dl_carrierBandwidth*12*SCS_kHz/2
+      dl_absoluteFrequencyPointA                                       = 638728; //640000;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=84,L=13 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                                        = 6366; //28875; //6366; #6407; #3384;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialDLBWPsubcarrierSpacing                                           = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                                      = 0;
+        initialDLBWPsearchSpaceZero                                             = 0;
+      #pdsch-ConfigCommon
+        #pdschTimeDomainAllocationList (up to 16 entries)
+             initialDLBWPk0_0                    = 0;
+             #initialULBWPmappingType
+	     #0=typeA,1=typeB
+             initialDLBWPmappingType_0           = 0;
+             #this is SS=1,L=13
+             initialDLBWPstartSymbolAndLength_0  = 40;
+
+             initialDLBWPk0_1                    = 0;
+             initialDLBWPmappingType_1           = 0;
+             #this is SS=2,L=12 
+             initialDLBWPstartSymbolAndLength_1  = 53;
+
+             initialDLBWPk0_2                    = 0;
+             initialDLBWPmappingType_2           = 0;
+             #this is SS=1,L=12 
+             initialDLBWPstartSymbolAndLength_2  = 54;
+
+             initialDLBWPk0_3                    = 0;
+             initialDLBWPmappingType_3           = 0;
+             #this is SS=1,L=4 //5 (4 is for 43, 5 is for 57)
+             initialDLBWPstartSymbolAndLength_3  = 57; //43; //57;
+  #uplinkConfigCommon 
+     #frequencyInfoUL
+      ul_frequencyBand                                                 = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      ul_subcarrierSpacing                                           = 1;
+      ul_carrierBandwidth                                            = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                                        = 6366; //28875; //6366; #6407; #3384;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialULBWPsubcarrierSpacing                                           = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 4;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 74;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -118;
+          #preambleReceivedTargetPower                               = -104;
+          #preambleReceivedTargetPower                               = -108;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 2;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 5;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14; //15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 1;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #  
+        #msg1_SubcarrierSpacing                                      = 1,
+
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+      # pusch-ConfigCommon (up to 16 elements)
+        initialULBWPk2_0                      = 2;
+        initialULBWPmappingType_0             = 1
+        # this is SS=0 L=11
+        initialULBWPstartSymbolAndLength_0    = 55;
+ 	
+	initialULBWPk2_1                      = 2;
+        initialULBWPmappingType_1             = 1;
+        # this is SS=0 L=12
+        initialULBWPstartSymbolAndLength_1    = 69;
+
+        initialULBWPk2_2                      = 7;
+        initialULBWPmappingType_2             = 1;
+        # this is SS=10 L=4
+        initialULBWPstartSymbolAndLength_2    = 52;
+
+        msg3_DeltaPreamble                                          = 1;
+        #p0_NominalWithGrant                                         =-90;
+        p0_NominalWithGrant                                         =-118;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        #p0_nominal                                                  = -90;
+        p0_nominal                                                  = -118;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1; #0x80;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1 
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1 
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7; //8; //7;
+      nrofDownlinkSymbols                                           = 6; //0; //6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4; //0; //4;
+
+  #ssPBCH_BlockPower                                             = 10;
+  ssPBCH_BlockPower                                             = -35;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    ///X2
+    enable_x2 = "yes";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+    target_enb_x2_ip_address      = (
+                                     { ipv4       = "127.0.0.1";
+                                       ipv6       = "192:168:30::17";
+                                       preference = "ipv4";
+                                     }
+                                    );
+
+    NETWORK_INTERFACES :
+    {
+
+        GNB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1_MME              = "CI_GNB_IP_ADDR";
+        GNB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1U                 = "CI_GNB_IP_ADDR";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        GNB_IPV4_ADDRESS_FOR_X2C                 = "127.0.0.2/24";
+        GNB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+	{
+	num_cc = 1;
+	tr_s_preference = "local_L1";
+	tr_n_preference = "local_RRC";
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+	pusch_proc_threads = 8;
+        }  
+);
+
+RUs = (
+    {		  
+       local_rf       = "no"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [7];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 114;
+         eNB_instances  = [0];
+         //clock_src = "internal";
+         clock_src = "external";
+
+        local_if_name  = "dpdk";
+        sdr_addrs      = "softmodem -m 2048 -l 34  -n 3 -b 0000:81:00.2 --proc-type auto --file-prefix hhh -- -p 0x1";
+        remote_address = "127.0.0.2";
+        local_address  = "127.0.0.1";
+        local_portc    = 50000;
+        remote_portc   = 50000;
+        local_portd    = 50001;
+        remote_portd   = 50001;
+        tr_preference  = "raw_if4p5"
+
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    //parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_DISABLE";
+  }
+);
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+    };
+

ci-scripts/docker_log_split.py

+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+# Python for CI of OAI-eNB + COTS-UE
+#
+#   Required Python Version
+#     Python 3.x
+#
+#   Required Python Package
+#     pexpect
+#---------------------------------------------------------------------
+
+
+#-----------------------------------------------------------
+# Import Libs
+#-----------------------------------------------------------
+import sys		# arg
+import re		# reg
+import os
+import subprocess
+
+
+class SplitReport():
+	def __init__(self):
+		self.logfilename = ''
+		self.destinationFolder = ''
+
+	def split(self):
+		self.destinationFolder = self.logfilename.replace(".log","")
+		if os.path.isfile(self.logfilename):
+			newImageLog = open(self.logfilename + '.new', 'w')
+			copyFlag = True
+			with open(self.logfilename, 'r') as imageLog:
+				for line in imageLog:
+					header = False
+					ret = re.search('====== Start of log for ([0-9\.A-Za-z\-\_]+) ======', line)
+					if ret is not None:
+						copyFlag = False
+						header = True
+						detailedLogFile = open(self.destinationFolder + '/' + ret.group(1), 'w')
+					if copyFlag:
+						newImageLog.write(line)
+					ret = re.search('====== End of log for ([0-9\.A-Za-z\-\_]+) ======', line)
+					if ret is not None:
+						copyFlag = True
+						detailedLogFile.close()
+					elif not copyFlag and not header:
+						detailedLogFile.write(line)
+			imageLog.close()
+			newImageLog.close()
+			os.rename(self.logfilename + '.new', self.logfilename)
+		else:
+			print('Cannot split unfound file')
+
+#--------------------------------------------------------------------------------------------------------
+#
+# Start of main
+#
+#--------------------------------------------------------------------------------------------------------
+
+argvs = sys.argv
+argc = len(argvs)
+
+SP = SplitReport()
+
+while len(argvs) > 1:
+	myArgv = argvs.pop(1)
+	if re.match('^\-\-logfilename=(.+)$', myArgv, re.IGNORECASE):
+		matchReg = re.match('^\-\-logfilename=(.+)$', myArgv, re.IGNORECASE)
+		SP.logfilename = matchReg.group(1)
+
+SP.split()
+
+sys.exit(0)

ci-scripts/ran.py

@@ -239,6 +239,7 @@ class RANManagement():
 		while (count > 0) and buildOAIprocess:
 			mySSH.command('ps aux | grep --color=never build_ | grep -v grep', '\$', 6)
 			result = re.search('build_oai', mySSH.getBefore())
+			print(result)
 			if result is None:
 				buildOAIprocess = False
 			else:
@@ -464,7 +465,7 @@ class RANManagement():
 				self.prematureExit = True
 				return
 			else:
-				mySSH.command('stdbuf -o0 cat enb_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync|Starting"', '\$', 4)
+				mySSH.command('stdbuf -o0 cat enb_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync|Starting|Started"', '\$', 4)
 				if rruCheck:
 					result = re.search('wait RUs', mySSH.getBefore())
 				else:

ci-scripts/xml_files/benetel_multi_node_build.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>build-tab</htmlTabRef>
+	<htmlTabName>Build</htmlTabName>
+	<htmlTabIcon>wrench</htmlTabIcon>
+	<TestCaseRequestedList>
+ 000001 000002
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="000001">
+		<class>Build_eNB</class>
+		<desc>Build eNB</desc>
+		<Build_eNB_args>--eNB -t benetel4g -w None</Build_eNB_args>
+		<forced_workspace_cleanup>True</forced_workspace_cleanup>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+	</testCase>
+
+
+	<testCase id="000002">
+		<class>Build_eNB</class>
+		<desc>Build gNB</desc>
+		<Build_eNB_args>--gNB -t benetel5g -w None</Build_eNB_args>
+		<forced_workspace_cleanup>True</forced_workspace_cleanup>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+	</testCase>
+
+
+
+
+</testCaseList>

ci-scripts/xml_files/benetel_nsa_base.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>TEST-FR1-TM1</htmlTabRef>
+	<htmlTabName>FR1</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<TestCaseRequestedList>
+ 010000
+ 030000
+ 040000
+ 010001
+ 000001
+ 050000
+ 050001
+ 000001
+ 060000
+ 060001
+ 000001
+ 070000
+ 070001
+ 010002
+ 000001
+ 080001
+ 080000
+ 010003
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="010000">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="010003">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+	<testCase id="010001">
+		<class>Attach_UE</class>
+		<desc>Attach UE</desc>
+	</testCase>
+
+	<testCase id="010002">
+		<class>Detach_UE</class>
+		<desc>Detach UE</desc>
+	</testCase>
+
+
+	<testCase id="030000">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/benetel-4g.conf</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+		<air_interface>lte</air_interface>
+   </testCase>
+
+
+	<testCase id="040000">
+		<class>Initialize_eNB</class>
+		<desc>Initialize gNB</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/benetel-5g.conf</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+		<air_interface>nr</air_interface>
+	</testCase>
+
+	<testCase id="000001">
+		<class>IdleSleep</class>
+		<desc>Sleep</desc>
+		<idle_sleep_time_in_sec>20</idle_sleep_time_in_sec>
+	</testCase>
+
+	<testCase id="050000">
+		<class>Ping</class>
+		<desc>Ping: 20pings in 20sec</desc>
+		<ping_args>-c 20</ping_args>
+		<ping_packetloss_threshold>50</ping_packetloss_threshold>
+	</testCase>
+
+	<testCase id="050001">
+		<class>Ping</class>
+		<desc>Ping: 100pings in 20sec</desc>
+		<ping_args>-c 100 -i 0.2</ping_args>
+		<ping_packetloss_threshold>50</ping_packetloss_threshold>
+	</testCase>
+
+
+	<testCase id="060000">
+		<class>Iperf</class>
+		<desc>iperf (DL/2.5Mbps/UDP)(60 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 2.5M -t 60 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="060001">
+		<class>Iperf</class>
+		<desc>iperf (UL/1.5Mbps/UDP)(60 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 1.5M -t 60 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+
+	<testCase id="070000">
+		<class>Iperf</class>
+		<desc>iperf (DL/20Mbps/UDP)(20 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 20M -t 20 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="070001">
+		<class>Iperf</class>
+		<desc>iperf (UL/3Mbps/UDP)(20 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 3M -t 20 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+
+
+	<testCase id="080000">
+		<class>Terminate_eNB</class>
+		<desc>Terminate eNB</desc>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+		<air_interface>lte</air_interface>
+	</testCase>
+
+	<testCase id="080001">
+		<class>Terminate_eNB</class>
+		<desc>Terminate gNB</desc>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+		<air_interface>nr</air_interface>
+	</testCase>
+
+</testCaseList>
+

ci-scripts/xml_files/fr1_image_build.xml → ci-scripts/xml_files/container_image_build.xml

@@ -22,7 +22,7 @@
 -->
 <testCaseList>
 	<htmlTabRef>build-tab</htmlTabRef>
-	<htmlTabName>Build</htmlTabName>
+	<htmlTabName>Build Container Images</htmlTabName>
 	<htmlTabIcon>wrench</htmlTabIcon>
 	<TestCaseRequestedList>
  000001
@@ -31,7 +31,7 @@
 
 	<testCase id="000001">
 		<class>Build_Image</class>
-		<desc>Build eNB Image</desc>
+		<desc>Build all Images</desc>
 		<kind>all</kind>
 		<eNB_instance>0</eNB_instance>
 		<eNB_serverId>0</eNB_serverId>

ci-scripts/xml_files/fr1_multi_node_build.xml

@@ -37,6 +37,7 @@
 		<eNB_instance>0</eNB_instance>
 		<eNB_serverId>0</eNB_serverId>
 		<backgroundBuild>True</backgroundBuild>
+		<forced_workspace_cleanup>True</forced_workspace_cleanup>
 	</testCase>
 
 	<testCase id="000004">
@@ -53,6 +54,7 @@
 		<eNB_instance>1</eNB_instance>
 		<eNB_serverId>1</eNB_serverId>
 		<backgroundBuild>True</backgroundBuild>
+		<forced_workspace_cleanup>True</forced_workspace_cleanup>
 	</testCase>
 
 	<testCase id="000003">

cmake_targets/CMakeLists.txt

@@ -926,6 +926,9 @@ set_target_properties(tcp_bridge_oai PROPERTIES COMPILE_FLAGS "-fvisibility=hidd
 # Benetel 4G library
 ######################################################################
 
+
+include_directories ("/usr/include/dpdk")
+
 set(HWLIB_BENETEL_4G_SOURCE
   ${OPENAIR_TARGETS}/ARCH/ETHERNET/benetel/4g/benetel.c
   ${OPENAIR_TARGETS}/ARCH/ETHERNET/benetel/4g/shared_buffers.c

cmake_targets/build_oai

@@ -48,8 +48,9 @@ DEADLINE_SCHEDULER_FLAG_USER=""
 CPU_AFFINITY_FLAG_USER="False" #Only valid when low-latency flag is set to False
 REL="Rel15"
 HW="None"
-TP="None"
+TP="Ethernet"
 EPC=0
+VERBOSE_CI=0
 VERBOSE_COMPILE=0
 CFLAGS_PROCESSOR_USER=""
 RUN_GROUP=0
@@ -292,6 +293,9 @@ function main() {
             esac
 			echo_info "Setting hardware to: $HW"
             shift 2;;
+       -t | --transport)
+	    TP=$2
+            shift 2;;
        -P | --phy_simulators)
             SIMUS_PHY=1
             echo_info "Will compile dlsim, ulsim, ..."
@@ -327,6 +331,10 @@ function main() {
             HWLAT_TEST=1
             echo_info "Will compile hw latency test program"
             shift;;
+       --verbose-ci)
+	        VERBOSE_CI=1
+            echo_info "Will compile with verbose instructions in CI Docker env"
+            shift;;
        --verbose-compile)
 	        VERBOSE_COMPILE=1
             echo_info "Will compile with verbose instructions"
@@ -940,6 +948,7 @@ function main() {
           echo_info "Building transport protocol libraries"
           rm -f liboai_transpro.so
           rm -f $dbin/liboai_transpro.so
+	  if [ "$TP" == "Ethernet" ]; then
               compilations \
 		  $build_dir oai_eth_transpro \
 		  liboai_eth_transpro.so $dbin/liboai_eth_transpro.so.$REL
@@ -947,6 +956,23 @@ function main() {
               ln -sf $dbin/liboai_eth_transpro.so.$REL $dbin/liboai_transpro.so
               echo_info "liboai_transpro.so is linked to ETHERNET transport"
 	  fi
+	  if [ "$TP" == "benetel4g" ]; then
+              compilations \
+		  $build_dir benetel_4g \
+		  libbenetel_4g.so $dbin/libbenetel_4g.$REL
+              ln -sf libbenetel_4g.so liboai_transpro.so
+              ln -sf $dbin/libbenetel_4g.so.$REL $dbin/liboai_transpro.so
+              echo_info "liboai_transpro.so is linked to BENETEL4G transport"
+	  fi
+	  if [ "$TP" == "benetel5g" ]; then
+              compilations \
+		  $build_dir benetel_5g \
+		  libbenetel_5g.so $dbin/libbenetel_5g.$REL
+              ln -sf libbenetel_5g.so liboai_transpro.so
+              ln -sf $dbin/libbenetel_5g.so.$REL $dbin/liboai_transpro.so
+              echo_info "liboai_transpro.so is linked to BENETEL4G transport"
+	  fi
+      fi
   fi
 
   ###################

cmake_targets/tools/build_helper

@@ -41,7 +41,7 @@ KERNEL_VERSION=$(uname -r | cut -d '.' -f1)
 KERNEL_MAJOR=$(uname -r | cut -d '.' -f2)
 
 #check if we run inside a container
-IS_CONTAINER=`egrep -c "docker|podman|kubepods" /proc/self/cgroup || true`
+IS_CONTAINER=`egrep -c "docker|podman|kubepods|libpod|buildah" /proc/self/cgroup || true`
 #sudo is not needed when we are root
 if [ "$UID" = 0 ]
 then
@@ -221,6 +221,11 @@ compilations() {
     ret=$?
   } > $dlog/$2.$REL.txt 2>&1
   set -e
+  if [ "$VERBOSE_CI" == "1" ]; then
+     echo_info "====== Start of log for $2.$REL.txt ======"
+     cat $dlog/$2.$REL.txt
+     echo_info "====== End of log for $2.$REL.txt ======"
+  fi
   if [[ $ret -ne 0 ]]; then
      check_warnings "$dlog/$2.$REL.txt"
      check_errors "$dlog/$2.$REL.txt"
@@ -359,10 +364,10 @@ check_install_usrp_uhd_driver(){
     elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
         if [ $IS_CONTAINER -eq 0 ]
         then
-            $SUDO $INSTALLER -y install python boost libusb-devel libusbx-devel boost-devel python-mako python-docutils cmake
+            $SUDO $INSTALLER -y install python boost libusb-devel libusbx-devel boost-devel python-mako python-docutils $CMAKE
             $SUDO -H pip install requests
         else
-            $SUDO $INSTALLER -y install boost boost-devel cmake3
+            $SUDO $INSTALLER -y install boost boost-devel $CMAKE
             $SUDO pip3 install mako requests
         fi
         if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
@@ -488,7 +493,7 @@ install_soapy_from_source(){
     #git checkout tags/release_003_010_001_001
     mkdir -p build
     cd build
-    cmake ../
+    $CMAKE ../
     echo "Compiling SoapyRemote"
     make -j`nproc`
     $SUDO make install
@@ -507,7 +512,7 @@ install_soapy_iris_from_source(){
     cd sklk-soapyiris
     mkdir -p build
     cd build
-    cmake ../
+    $CMAKE ../
     echo "Compiling SoapyIris"
     make -j`nproc`
     $SUDO make install
@@ -684,7 +689,7 @@ check_install_oai_software() {
 	automake  \
 	bison  \
 	build-essential \
-	cmake \
+	$CMAKE \
 	cmake-curses-gui  \
         ninja-build \
 	doxygen \

common/utils/T/T_defs.h

@@ -42,9 +42,9 @@
 /* maximum size of a message - increase if needed */
 #if BASIC_SIMULATOR
    /* let's have 100 RBs functional for the basic simulator */
-#  define T_BUFFER_MAX (1024*64*2)
+#  define T_BUFFER_MAX (1024*64*4)
 #else
-#  define T_BUFFER_MAX (1024*64*2)
+#  define T_BUFFER_MAX (1024*64*4)
 #endif
 
 /* size of the local cache for messages (must be pow(2,something)) */

common/utils/T/T_messages.txt

@@ -93,6 +93,10 @@ ID = GNB_PHY_PUCCH_PUSCH_IQ
     DESC = gNodeB input data in the frequency domain for a slot where some PUCCH or PUSCH detection was done
     GROUP = ALL:PHY:GRAPHIC:HEAVY:GNB
     FORMAT = int,frame : int,slot : buffer,rxdataF
+ID = GNB_PHY_PRACH_INPUT_SIGNAL
+    DESC = gNodeB input data in the time domain for slots with PRACH detection
+    GROUP = ALL:PHY:GRAPHIC:HEAVY:GNB
+    FORMAT = int,frame : int,slot : int,antenna : buffer,rxdata
 
 #MAC logs
 ID = ENB_MAC_UE_DL_SDU

docker/Dockerfile.eNB.rhel8.2

@@ -27,14 +27,15 @@
 
 FROM localhost/ran-build:latest AS enb-build 
 
+RUN rm -Rf /oai-ran
 WORKDIR /oai-ran
+COPY . .
 
 #run build_oai to build the target image
 RUN /bin/sh oaienv && \ 
     cd cmake_targets && \
-    rm -Rf log && \
     mkdir -p log && \
-    ./build_oai --eNB --ninja -w USRP
+    ./build_oai --eNB --ninja -w USRP --verbose-ci
 
 # debug
 #RUN ldconfig -v && ldd /oai-ran/targets/bin/lte-softmodem.Rel15

docker/Dockerfile.eNB.ubuntu18

@@ -27,14 +27,15 @@
 
 FROM ran-build:latest AS enb-build 
 
+RUN rm -Rf /oai-ran
 WORKDIR /oai-ran
+COPY . .
 
 #run build_oai to build the target image
 RUN /bin/sh oaienv && \ 
     cd cmake_targets && \
-    rm -Rf log && \
     mkdir -p log && \
-    ./build_oai --eNB --ninja -w USRP
+    ./build_oai --eNB --ninja -w USRP --verbose-ci
 
 RUN apt-get install -y python3-pip && \
     pip3 install --ignore-installed pyyaml && \

docker/Dockerfile.gNB.rhel8.2

@@ -27,14 +27,15 @@
 
 FROM localhost/ran-build:latest AS gnb-build 
 
+RUN rm -Rf /oai-ran
 WORKDIR /oai-ran
+COPY . .
 
 #run build_oai to build the target image
 RUN /bin/sh oaienv && \ 
     cd cmake_targets && \
-    rm -Rf log && \
     mkdir -p log && \
-    ./build_oai --gNB --ninja -w USRP
+    ./build_oai --gNB --ninja -w USRP --verbose-ci
 
 #debug
 #RUN ldconfig -v

docker/Dockerfile.gNB.ubuntu18

@@ -27,14 +27,15 @@
 
 FROM ran-build:latest AS gnb-build 
 
+RUN rm -Rf /oai-ran
 WORKDIR /oai-ran
+COPY . .
 
 #run build_oai to build the target image
 RUN /bin/sh oaienv && \ 
     cd cmake_targets && \
-    rm -Rf log && \
     mkdir -p log && \
-    ./build_oai --gNB --ninja -w USRP
+    ./build_oai --gNB --ninja -w USRP --verbose-ci
 
 #debug
 RUN ldconfig -v

docker/Dockerfile.lteUE.rhel8.2

@@ -27,15 +27,15 @@
 
 FROM localhost/ran-build:latest AS lte-ue-build 
 
-
+RUN rm -Rf /oai-ran
 WORKDIR /oai-ran
+COPY . .
 
 #run build_oai to build the target image
 RUN /bin/sh oaienv && \ 
     cd cmake_targets && \
-    rm -Rf log && \
     mkdir -p log && \
-    ./build_oai --UE --ninja -w USRP
+    ./build_oai --UE --ninja -w USRP --verbose-ci
 
 # debug
 #RUN ldconfig -v && ldd /oai-ran/targets/bin/lte-uesoftmodem.Rel15

docker/Dockerfile.lteUE.ubuntu18

@@ -27,14 +27,15 @@
 
 FROM ran-build:latest AS lte-ue-build 
 
+RUN rm -Rf /oai-ran
 WORKDIR /oai-ran
+COPY . .
 
 #run build_oai to build the target image
 RUN /bin/sh oaienv && \ 
     cd cmake_targets && \
-    rm -Rf log && \
     mkdir -p log && \
-    ./build_oai --UE --ninja -w USRP
+    ./build_oai --UE --ninja -w USRP --verbose-ci
 
 # debug
 #RUN ldconfig -v

docker/Dockerfile.nrUE.rhel8.2

@@ -27,14 +27,15 @@
 
 FROM localhost/ran-build:latest AS nr-ue-build 
 
+RUN rm -Rf /oai-ran
 WORKDIR /oai-ran
+COPY . .
 
 #run build_oai to build the target image
 RUN /bin/sh oaienv && \ 
     cd cmake_targets && \
-    rm -Rf log && \
     mkdir -p log && \
-    ./build_oai --nrUE --ninja -w USRP
+    ./build_oai --nrUE --ninja -w USRP --verbose-ci
 
 # debug
 #RUN ldconfig -v

docker/Dockerfile.nrUE.ubuntu18

@@ -27,14 +27,15 @@
 
 FROM ran-build:latest AS nr-ue-build 
 
+RUN rm -Rf /oai-ran
 WORKDIR /oai-ran
+COPY . .
 
 #run build_oai to build the target image
 RUN /bin/sh oaienv && \ 
     cd cmake_targets && \
-    rm -Rf log && \
     mkdir -p log && \
-    ./build_oai --nrUE --ninja -w USRP
+    ./build_oai --nrUE --ninja -w USRP --verbose-ci
 
 # debug
 #RUN ldconfig -v

executables/nr-ru.c

@@ -1343,6 +1343,10 @@ void *ru_thread( void *param ) {
       int prach_id=find_nr_prach_ru(ru,proc->frame_rx,proc->tti_rx,SEARCH_EXIST);
       uint8_t prachStartSymbol,N_dur;
       if (prach_id>=0) {
+
+	T(T_GNB_PHY_PRACH_INPUT_SIGNAL, T_INT(proc->frame_rx), T_INT(proc->tti_rx), T_INT(0),
+	  T_BUFFER(&ru->common.rxdata[0][fp->get_samples_slot_timestamp(proc->tti_rx-1,fp,0)]/*-ru->N_TA_offset*/, fp->get_samples_per_slot(proc->tti_rx,fp)*4*2));
+
 	N_dur = get_nr_prach_duration(ru->prach_list[prach_id].fmt);
 	/*
 	get_nr_prach_info_from_index(ru->config.prach_config.prach_ConfigurationIndex.value,

openair1/PHY/NR_TRANSPORT/nr_prach.c

@@ -171,6 +171,9 @@ void rx_nr_prach_ru(RU_t *ru,
 
   int16_t *prach[ru->nb_rx];
   int prach_sequence_length = ru->config.prach_config.prach_sequence_length.value;
+
+  int msg1_frequencystart   = ru->config.prach_config.num_prach_fd_occasions_list[numRA].k1.value;
+
   int sample_offset_slot = (prachStartSymbol==0?0:fp->ofdm_symbol_size*prachStartSymbol+fp->nb_prefix_samples0+fp->nb_prefix_samples*(prachStartSymbol-1));
   //to be checked for mu=0;
 
@@ -192,7 +195,8 @@ void rx_nr_prach_ru(RU_t *ru,
   int16_t *prach2;
 
   if (prach_sequence_length == 0) {
-    LOG_D(PHY,"PRACH (ru %d) in %d.%d, format %d\n", ru->idx,frame,slot2,prachFormat);
+    LOG_D(PHY,"PRACH (ru %d) in %d.%d, format %d, msg1_frequencyStart %d\n",
+	  ru->idx,frame,slot2,prachFormat,msg1_frequencystart);
     AssertFatal(prachFormat<4,"Illegal prach format %d for length 839\n",prachFormat);
     switch (prachFormat) {
     case 0:
@@ -214,8 +218,8 @@ void rx_nr_prach_ru(RU_t *ru,
     }
   }
   else {
-    LOG_D(PHY,"PRACH (ru %d) in %d.%d, format %s,startSymbol %d\n",
-          ru->idx,frame,slot,prachfmt[prachFormat],prachStartSymbol);
+    LOG_D(PHY,"PRACH (ru %d) in %d.%d, format %s, msg1_frequencyStart %d,startSymbol %d\n",
+	  ru->idx,frame,slot,prachfmt[prachFormat],msg1_frequencystart,prachStartSymbol);
 
     switch (prachFormat) {
     case 4: //A1
@@ -280,15 +284,15 @@ void rx_nr_prach_ru(RU_t *ru,
     K=1;
     kbar=2;
   }
-
-  int k1 = (int16_t)ru->config.prach_config.num_prach_fd_occasions_list[numRA].k1.value;
+  int n_ra_prb            = msg1_frequencystart;
+  int k                   = (12*n_ra_prb) - 6*fp->N_RB_UL;
 
   int N_ZC = (prach_sequence_length==0)?839:139;
 
-  if (k1<0) k1+=(fp->ofdm_symbol_size);
+  if (k<0) k+=(fp->ofdm_symbol_size);
   
-  k1*=K;
-  k1+=kbar;
+  k*=K;
+  k+=kbar;
 
   int reps=1;
 
@@ -649,7 +653,7 @@ void rx_nr_prach_ru(RU_t *ru,
     int16_t rxsigF_tmp[N_ZC<<1];
     //    if (k+N_ZC > dftlen) { // PRACH signal is split around DC 
     int16_t *rxsigF2=rxsigF[aa];
-    int k2=k1<<1;
+    int k2=k<<1;
 
     for (int j=0;j<N_ZC<<1;j++,k2++) {
       if (k2==(dftlen<<1)) k2=0;
@@ -681,6 +685,7 @@ void rx_nr_prach(PHY_VARS_gNB *gNB,
   uint16_t           rootSequenceIndex;  
   int                numrootSequenceIndex;
   uint8_t            restricted_set;      
+  uint8_t            n_ra_prb=0xFF;
   int16_t            *prachF=NULL;
   int                nb_rx;
 
@@ -715,6 +720,7 @@ void rx_nr_prach(PHY_VARS_gNB *gNB,
   numrootSequenceIndex   = cfg->num_prach_fd_occasions_list[prach_pdu->num_ra].num_root_sequences.value;
   NCS          = prach_pdu->num_cs;//cfg->num_prach_fd_occasions_list[0].prach_zero_corr_conf.value;
   int prach_sequence_length = cfg->prach_sequence_length.value;
+  int msg1_frequencystart   = cfg->num_prach_fd_occasions_list[prach_pdu->num_ra].k1.value;
   //  int num_unused_root_sequences = cfg->num_prach_fd_occasions_list[0].num_unused_root_sequences.value;
   // cfg->num_prach_fd_occasions_list[0].unused_root_sequences_list
 
@@ -728,8 +734,7 @@ void rx_nr_prach(PHY_VARS_gNB *gNB,
   prach_ifft        = gNB->prach_vars.prach_ifft;
   prachF            = gNB->prach_vars.prachF;
   if (LOG_DEBUGFLAG(PRACH)){
-    if ((frame&1023) < 20) LOG_D(PHY,"PRACH (gNB) : running rx_prach for subframe %d, rootSequenceIndex %d\n",
-                                 subframe, rootSequenceIndex);
+    if ((frame&1023) < 20) LOG_D(PHY,"PRACH (gNB) : running rx_prach for subframe %d, msg1_frequencystart %d, rootSequenceIndex %d\n", subframe,msg1_frequencystart,rootSequenceIndex);
   }
 
   start_meas(&gNB->rx_prach);
@@ -931,13 +936,14 @@ void rx_nr_prach(PHY_VARS_gNB *gNB,
   if (LOG_DUMPFLAG(PRACH)) {
     //int en = dB_fixed(signal_energy((int32_t*)&rxsigF[0][0],840));
     //    if (en>60) {
-      int k1 = (int16_t)cfg->num_prach_fd_occasions_list[prach_pdu->num_ra].k1.value;
+      int k = (12*n_ra_prb) - 6*fp->N_RB_UL;
+      
+      if (k<0) k+=fp->ofdm_symbol_size;
       
-      if (k1<0) k1+=fp->ofdm_symbol_size;
+      k*=12;
+      k+=13;
+      k*=2;
       
-      k1*=12;
-      k1+=13;
-      k1*=2;
 
       LOG_M("rxsigF.m","prach_rxF",&rxsigF[0][0],12288,1,1);
       LOG_M("prach_rxF_comp0.m","prach_rxF_comp0",prachF,1024,1,1);

openair1/PHY/NR_UE_TRANSPORT/nr_prach.c

@@ -71,7 +71,7 @@ int32_t generate_nr_prach(PHY_VARS_NR_UE *ue, uint8_t gNB_id, uint8_t slot){
 
   int16_t Ncp = 0, amp, *prach, *prach2, *prachF, *Xu;
   int32_t Xu_re, Xu_im;
-  int prach_start, prach_sequence_length, i, prach_len, dftlen, mu, kbar, K, k1, prachStartSymbol, sample_offset_slot;
+  int prach_start, prach_sequence_length, i, prach_len, dftlen, mu, kbar, K, n_ra_prb, k, prachStartSymbol, sample_offset_slot;
   //int restricted_Type;
 
   prach                   = prach_tmp;
@@ -83,6 +83,7 @@ int32_t generate_nr_prach(PHY_VARS_NR_UE *ue, uint8_t gNB_id, uint8_t slot){
   mu                      = nrUE_config->prach_config.prach_sub_c_spacing;
   restricted_set          = prach_pdu->restricted_set;
   rootSequenceIndex       = prach_pdu->root_seq_id;
+  n_ra_prb                = prach_pdu->freq_msg1;
   NCS                     = prach_pdu->num_cs;
   prach_fmt_id            = prach_pdu->prach_format;
   preamble_index          = prach_resources->ra_PreambleIndex;
@@ -92,7 +93,7 @@ int32_t generate_nr_prach(PHY_VARS_NR_UE *ue, uint8_t gNB_id, uint8_t slot){
   first_nonzero_root_idx  = 0;
   kbar                    = 1;
   K                       = 24;
-  k1                       = (int16_t)prach_pdu->freq_msg1;
+  k                       = 12*n_ra_prb - 6*fp->N_RB_UL;
   prachStartSymbol        = prach_pdu->prach_start_symbol;
   //restricted_Type         = 0;
 
@@ -184,7 +185,7 @@ int32_t generate_nr_prach(PHY_VARS_NR_UE *ue, uint8_t gNB_id, uint8_t slot){
   // now generate PRACH signal
 #ifdef NR_PRACH_DEBUG
     if (NCS>0)
-      LOG_I(PHY, "PRACH [UE %d] generate PRACH in slot %d for RootSeqIndex %d, Preamble Index %d, PRACH Format %s, NCS %d (N_ZC %d): Preamble_offset %d, Preamble_shift %dn",
+      LOG_I(PHY, "PRACH [UE %d] generate PRACH in slot %d for RootSeqIndex %d, Preamble Index %d, PRACH Format %s, NCS %d (N_ZC %d): Preamble_offset %d, Preamble_shift %d msg1 frequency start %d\n",
         Mod_id,
         slot,
         rootSequenceIndex,
@@ -193,7 +194,8 @@ int32_t generate_nr_prach(PHY_VARS_NR_UE *ue, uint8_t gNB_id, uint8_t slot){
         NCS,
         N_ZC,
         preamble_offset,
-        preamble_shift);
+        preamble_shift,
+        n_ra_prb);
   #endif
 
   //  nsymb = (frame_parms->Ncp==0) ? 14:12;
@@ -207,16 +209,17 @@ int32_t generate_nr_prach(PHY_VARS_NR_UE *ue, uint8_t gNB_id, uint8_t slot){
     kbar = 2;
   }
 
-  if (k1<0)
-    k1 += fp->ofdm_symbol_size;
+  if (k<0)
+    k += fp->ofdm_symbol_size;
 
-  k1 *= K;
-  k1 += kbar;
-  k1 *= 2;
+  k *= K;
+  k += kbar;
+  k *= 2;
 
-  LOG_I(PHY, "PRACH [UE %d] in slot %d, placing PRACH in position %d, preamble_offset %d, first_nonzero_root_idx %d\n", Mod_id,
+  LOG_I(PHY, "PRACH [UE %d] in slot %d, placing PRACH in position %d, msg1 frequency start %d, preamble_offset %d, first_nonzero_root_idx %d\n", Mod_id,
     slot,
-    k1,
+    k,
+    n_ra_prb,
     preamble_offset,
     first_nonzero_root_idx);
 
@@ -341,10 +344,10 @@ int32_t generate_nr_prach(PHY_VARS_NR_UE *ue, uint8_t gNB_id, uint8_t slot){
 
     Xu_re = (((int32_t)Xu[offset<<1]*amp)>>15);
     Xu_im = (((int32_t)Xu[1+(offset<<1)]*amp)>>15);
-    prachF[k1++]= ((Xu_re*nr_ru[offset2<<1]) - (Xu_im*nr_ru[1+(offset2<<1)]))>>15;
-    prachF[k1++]= ((Xu_im*nr_ru[offset2<<1]) + (Xu_re*nr_ru[1+(offset2<<1)]))>>15;
+    prachF[k++]= ((Xu_re*nr_ru[offset2<<1]) - (Xu_im*nr_ru[1+(offset2<<1)]))>>15;
+    prachF[k++]= ((Xu_im*nr_ru[offset2<<1]) + (Xu_re*nr_ru[1+(offset2<<1)]))>>15;
 
-    if (k1==dftlen) k1=0;
+    if (k==dftlen) k=0;
   }
 
   #if defined (PRACH_WRITE_OUTPUT_DEBUG)

openair1/SIMULATION/NR_PHY/prachsim.c

@@ -37,6 +37,7 @@
 #include "SCHED_NR_UE/phy_frame_config_nr.h"
 #include "PHY/phy_vars_nr_ue.h"
 #include "PHY/NR_REFSIG/refsig_defs_ue.h"
+#include "PHY/MODULATION/nr_modulation.h"
 #include "PHY/MODULATION/modulation_eNB.h"
 #include "PHY/MODULATION/modulation_UE.h"
 #include "PHY/INIT/phy_init.h"
@@ -177,7 +178,7 @@ int main(int argc, char **argv){
 
   double sigma2, sigma2_dB = 0, SNR, snr0 = -2.0, snr1 = 0.0, ue_speed0 = 0.0, ue_speed1 = 0.0;
   double **s_re, **s_im, **r_re, **r_im, iqim = 0.0, delay_avg = 0, ue_speed = 0, fs, bw;
-  int i, aa, aarx, **txdata, trial, n_frames = 1, prach_start, rx_prach_start; //, ntrials=1;
+  int i, l, aa, aarx, **txdata, trial, n_frames = 1, prach_start, rx_prach_start; //, ntrials=1;
   int N_RB_UL = 106, delay = 0, NCS_config = 13, rootSequenceIndex = 1, threequarter_fs = 0, mu = 1, fd_occasion = 0, loglvl = OAILOG_INFO, numRA = 0, prachStartSymbol = 0;
   uint8_t snr1set = 0, ue_speed1set = 0, transmission_mode = 1, n_tx = 1, n_rx = 1, awgn_flag = 0, msg1_frequencystart = 0, num_prach_fd_occasions = 1, prach_format=0;
   uint8_t frame = 1, slot=19, slot_gNB=19, config_index = 98, prach_sequence_length = 1, restrictedSetConfig = 0, N_dur, N_t_slot, start_symbol;
@@ -808,6 +809,16 @@ int main(int argc, char **argv){
 	  }
 	}
 
+	for (l = 0; l < frame_parms->symbols_per_slot; l++) {
+	  for (aa = 0; aa < frame_parms->nb_antennas_rx; aa++) {
+	    nr_slot_fep_ul(frame_parms,
+			   ru->common.rxdata[aa],
+			   ru->common.rxdataF[aa],
+			   l,
+			   slot,
+			   ru->N_TA_offset);
+	  }
+	}
 	
         rx_nr_prach_ru(ru, prach_format, numRA, prachStartSymbol, prachOccasion, frame, slot);
 
@@ -831,7 +842,8 @@ int main(int argc, char **argv){
             LOG_M("prachF0.m","prachF0", &gNB->prach_vars.prachF[0], N_ZC, 1, 1);
             LOG_M("rxsig0.m","rxs0", &gNB->common_vars.rxdata[0][subframe*frame_parms->samples_per_subframe], frame_parms->samples_per_subframe, 1, 1);
             LOG_M("ru_rxsig0.m","rxs0", &ru->common.rxdata[0][subframe*frame_parms->samples_per_subframe], frame_parms->samples_per_subframe, 1, 1);
-            LOG_M("ru_rxsigF0.m","rxsF0", ru->prach_rxsigF[0][0], N_ZC, 1, 1);
+            LOG_M("ru_rxsigF0.m","rxsF0", ru->common.rxdataF[0], frame_parms->ofdm_symbol_size*frame_parms->symbols_per_slot, 1, 1);
+            LOG_M("ru_prach_rxsigF0.m","rxsF0", ru->prach_rxsigF[0][0], N_ZC, 1, 1);
             LOG_M("prach_preamble.m","prachp", &gNB->X_u[0], N_ZC, 1, 1);
             LOG_M("ue_prach_preamble.m","prachp", &UE->X_u[0], N_ZC, 1, 1);
           #endif

openair2/LAYER2/NR_MAC_COMMON/nr_mac.h

@@ -334,12 +334,12 @@ typedef struct {
 #define DL_SCH_LCID_CON_RES_ID                     0x3E
 #define DL_SCH_LCID_PADDING                        0x3F
 
-#define UL_SCH_LCID_CCCH                           0x00
+#define UL_SCH_LCID_CCCH1                          0x00
 #define UL_SCH_LCID_SRB1                           0x01
 #define UL_SCH_LCID_SRB2                           0x02
 #define UL_SCH_LCID_SRB3                           0x03
 #define UL_SCH_LCID_DTCH                           0x04
-#define UL_SCH_LCID_CCCH_48                        0x34
+#define UL_SCH_LCID_CCCH                           0x34
 #define UL_SCH_LCID_RECOMMENDED_BITRATE_QUERY      0x35
 #define UL_SCH_LCID_MULTI_ENTRY_PHR_4_OCT          0x36
 #define UL_SCH_LCID_CONFIGURED_GRANT_CONFIRMATION  0x37

openair2/LAYER2/NR_MAC_UE/config_ue.c

@@ -310,11 +310,8 @@ void config_common_ue(NR_UE_MAC_INST_t *mac,
       cfg->prach_config.num_prach_fd_occasions_list[i].prach_root_sequence_index = scc->uplinkConfigCommon->initialUplinkBWP->rach_ConfigCommon->choice.setup->prach_RootSequenceIndex.choice.l139; 
     else
       cfg->prach_config.num_prach_fd_occasions_list[i].prach_root_sequence_index = scc->uplinkConfigCommon->initialUplinkBWP->rach_ConfigCommon->choice.setup->prach_RootSequenceIndex.choice.l839;
-    cfg->prach_config.num_prach_fd_occasions_list[i].k1 =
-        (NRRIV2PRBOFFSET(scc->uplinkConfigCommon->initialUplinkBWP->genericParameters.locationAndBandwidth, MAX_BWP_SIZE) +
-        scc->uplinkConfigCommon->initialUplinkBWP->rach_ConfigCommon->choice.setup->rach_ConfigGeneric.msg1_FrequencyStart +
-        (get_N_RA_RB(cfg->prach_config.prach_sub_c_spacing, scc->uplinkConfigCommon->frequencyInfoUL->scs_SpecificCarrierList.list.array[0]->subcarrierSpacing ) * i))*12 -
-        6*scc->uplinkConfigCommon->frequencyInfoUL->scs_SpecificCarrierList.list.array[0]->carrierBandwidth;
+
+    cfg->prach_config.num_prach_fd_occasions_list[i].k1 = NRRIV2PRBOFFSET(scc->uplinkConfigCommon->initialUplinkBWP->genericParameters.locationAndBandwidth, MAX_BWP_SIZE) + scc->uplinkConfigCommon->initialUplinkBWP->rach_ConfigCommon->choice.setup->rach_ConfigGeneric.msg1_FrequencyStart + (get_N_RA_RB(cfg->prach_config.prach_sub_c_spacing, scc->uplinkConfigCommon->frequencyInfoUL->scs_SpecificCarrierList.list.array[0]->subcarrierSpacing ) * i);
     cfg->prach_config.num_prach_fd_occasions_list[i].prach_zero_corr_conf = scc->uplinkConfigCommon->initialUplinkBWP->rach_ConfigCommon->choice.setup->rach_ConfigGeneric.zeroCorrelationZoneConfig;
     cfg->prach_config.num_prach_fd_occasions_list[i].num_root_sequences = compute_nr_root_seq(scc->uplinkConfigCommon->initialUplinkBWP->rach_ConfigCommon->choice.setup, nb_preambles, mac->frame_type, frequency_range);
     //cfg->prach_config.num_prach_fd_occasions_list[i].num_unused_root_sequences = ???

openair2/LAYER2/NR_MAC_gNB/config.c

@@ -208,11 +208,8 @@ void config_common(int Mod_idP, int pdsch_AntennaPorts, NR_ServingCellConfigComm
       cfg->prach_config.num_prach_fd_occasions_list[i].prach_root_sequence_index.value = scc->uplinkConfigCommon->initialUplinkBWP->rach_ConfigCommon->choice.setup->prach_RootSequenceIndex.choice.l839;
     cfg->prach_config.num_prach_fd_occasions_list[i].prach_root_sequence_index.tl.tag = NFAPI_NR_CONFIG_PRACH_ROOT_SEQUENCE_INDEX_TAG;
     cfg->num_tlv++;
-    cfg->prach_config.num_prach_fd_occasions_list[i].k1.value =
-        (NRRIV2PRBOFFSET(scc->uplinkConfigCommon->initialUplinkBWP->genericParameters.locationAndBandwidth, MAX_BWP_SIZE) +
-        scc->uplinkConfigCommon->initialUplinkBWP->rach_ConfigCommon->choice.setup->rach_ConfigGeneric.msg1_FrequencyStart +
-        (get_N_RA_RB(cfg->prach_config.prach_sub_c_spacing.value, scc->uplinkConfigCommon->frequencyInfoUL->scs_SpecificCarrierList.list.array[0]->subcarrierSpacing ) * i))*12 -
-        6*scc->uplinkConfigCommon->frequencyInfoUL->scs_SpecificCarrierList.list.array[0]->carrierBandwidth;
+    cfg->prach_config.num_prach_fd_occasions_list[i].k1.value = NRRIV2PRBOFFSET(scc->uplinkConfigCommon->initialUplinkBWP->genericParameters.locationAndBandwidth, MAX_BWP_SIZE) + scc->uplinkConfigCommon->initialUplinkBWP->rach_ConfigCommon->choice.setup->rach_ConfigGeneric.msg1_FrequencyStart + (get_N_RA_RB( cfg->prach_config.prach_sub_c_spacing.value, scc->uplinkConfigCommon->frequencyInfoUL->scs_SpecificCarrierList.list.array[0]->subcarrierSpacing ) * i);
+//k1= msg1_FrequencyStart + 12 (no. of FDM)(RB for PRACH occasion);
     cfg->prach_config.num_prach_fd_occasions_list[i].k1.tl.tag = NFAPI_NR_CONFIG_K1_TAG;
     cfg->num_tlv++;
     cfg->prach_config.num_prach_fd_occasions_list[i].prach_zero_corr_conf.value = scc->uplinkConfigCommon->initialUplinkBWP->rach_ConfigCommon->choice.setup->rach_ConfigGeneric.zeroCorrelationZoneConfig;

openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_RA.c

@@ -577,7 +577,8 @@ void nr_initiate_ra_proc(module_id_t module_idP,
       LOG_D(MAC, "%s() Msg2[%04d%d] SFN/SF:%04d%d\n", __FUNCTION__, ra->Msg2_frame, ra->Msg2_slot, frameP, slotP);
 
       int loop = 0;
-      if (!ra->cfra) {
+      // This condition allows for the usage of a preconfigured rnti for the first UE
+      if (!ra->cfra || ra->rnti == 0) {
         do {
           ra->rnti = (taus() % 65518) + 1;
           loop++;
@@ -1293,6 +1294,7 @@ void nr_generate_Msg4(module_id_t module_idP, int CC_id, frame_t frameP, sub_fra
                                                                                     pdsch_pdu_rel15->rbStart,
                                                                                     pdsch_pdu_rel15->BWPSize);
 
+    dci_payload.format_indicator = 1;
     dci_payload.time_domain_assignment.val = time_domain_assignment;
     dci_payload.vrb_to_prb_mapping.val = 0;
     dci_payload.mcs = pdsch_pdu_rel15->mcsIndex[0];
@@ -1378,14 +1380,13 @@ void nr_check_Msg4_Ack(module_id_t module_id, int CC_id, frame_t frame, sub_fram
   NR_UE_info_t *UE_info = &RC.nrmac[module_id]->UE_info;
   NR_UE_harq_t *harq = &UE_info->UE_sched_ctrl[UE_id].harq_processes[current_harq_pid];
 
-  LOG_D(MAC, "ue %d, rnti %d, harq is waiting %d, round %d, frame %d %d, harq id %d\n", UE_id, ra->rnti, harq->is_waiting, harq->round, frame, slot, current_harq_pid);
+  LOG_D(NR_MAC, "ue %d, rnti %d, harq is waiting %d, round %d, frame %d %d, harq id %d\n", UE_id, ra->rnti, harq->is_waiting, harq->round, frame, slot, current_harq_pid);
 
   if (harq->is_waiting == 0)
   {
     if (harq->round == 0)
     {
       nr_clear_ra_proc(module_id, CC_id, frame, ra);
-      free(ra->preambles.preamble_list);
       UE_info->active[UE_id] = true;
       LOG_I(NR_MAC, "(ue %i, rnti 0x%04x) Received Ack of RA-Msg4. CBRA procedure succeeded!\n", UE_id, ra->rnti);
     }

openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_primitives.c

@@ -1756,12 +1756,22 @@ void mac_remove_nr_ue(module_id_t mod_id, rnti_t rnti)
     if (pthread_mutex_lock(&rnti_to_remove_mutex)) exit(1);
     if (rnti_to_remove_count == 10) exit(1);
     rnti_to_remove[rnti_to_remove_count] = rnti;
-    LOG_W(MAC, "to remove in mac rnti_to_remove[%d]=%d\n", rnti_to_remove_count, rnti);
+    LOG_W(NR_MAC, "to remove in mac rnti_to_remove[%d] = 0x%04x\n", rnti_to_remove_count, rnti);
     rnti_to_remove_count++;
     if (pthread_mutex_unlock(&rnti_to_remove_mutex)) exit(1);
   }
 }
 
+void nr_mac_remove_ra_rnti_ue(module_id_t mod_id, rnti_t rnti) {
+  // Hack to remove UE in the phy (following the same procedure as in function mac_remove_nr_ue)
+  if (pthread_mutex_lock(&rnti_to_remove_mutex)) exit(1);
+  if (rnti_to_remove_count == 10) exit(1);
+  rnti_to_remove[rnti_to_remove_count] = rnti;
+  LOG_W(NR_MAC, "to remove in mac rnti_to_remove[%d] = 0x%04x\n", rnti_to_remove_count, rnti);
+  rnti_to_remove_count++;
+  if (pthread_mutex_unlock(&rnti_to_remove_mutex)) exit(1);
+}
+
 uint8_t nr_get_tpc(int target, uint8_t cqi, int incr) {
   // al values passed to this function are x10
 

openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_ulsch.c

@@ -257,19 +257,7 @@ void nr_process_mac_pdu(
               // todo
               break;
         case UL_SCH_LCID_CCCH:
-          mac_subheader_len = 1;
-          nr_mac_rrc_data_ind(module_idP,
-                              CC_id,
-                              frameP,
-                              0,
-                              0,
-                              rnti,
-                              CCCH,
-                              pdu_ptr+mac_subheader_len,
-                              pdu_len-mac_subheader_len,
-                              0);
-              break;
-        case UL_SCH_LCID_CCCH_48:
+        case UL_SCH_LCID_CCCH1:
           mac_subheader_len = 1;
           nr_mac_rrc_data_ind(module_idP,
                               CC_id,
@@ -523,6 +511,7 @@ void nr_rx_sdu(const module_id_t gnb_mod_idP,
 
       if(no_sig) {
         LOG_W(NR_MAC, "Random Access %i failed at state %i\n", i, ra->state);
+        nr_mac_remove_ra_rnti_ue(gnb_mod_idP, ra->rnti);
         nr_clear_ra_proc(gnb_mod_idP, CC_idP, frameP, ra);
       } else {
 
@@ -547,8 +536,8 @@ void nr_rx_sdu(const module_id_t gnb_mod_idP,
         if(ra->cfra) {
 
           LOG_I(NR_MAC, "(ue %i, rnti 0x%04x) CFRA procedure succeeded!\n", UE_id, ra->rnti);
+          nr_mac_remove_ra_rnti_ue(gnb_mod_idP, ra->rnti);
           nr_clear_ra_proc(gnb_mod_idP, CC_idP, frameP, ra);
-          free(ra->preambles.preamble_list);
           UE_info->active[UE_id] = true;
 
         } else {
@@ -586,6 +575,7 @@ void nr_rx_sdu(const module_id_t gnb_mod_idP,
         continue;
 
       LOG_W(NR_MAC, "Random Access %i failed at state %i\n", i, ra->state);
+      nr_mac_remove_ra_rnti_ue(gnb_mod_idP, ra->rnti);
       nr_clear_ra_proc(gnb_mod_idP, CC_idP, frameP, ra);
     }
   }

openair2/LAYER2/NR_MAC_gNB/mac_proto.h

@@ -312,6 +312,8 @@ int add_new_nr_ue(module_id_t mod_idP, rnti_t rntiP, NR_CellGroupConfig_t *secon
 
 void mac_remove_nr_ue(module_id_t mod_id, rnti_t rnti);
 
+void nr_mac_remove_ra_rnti_ue(module_id_t mod_id, rnti_t rnti);
+
 int allocate_nr_CCEs(gNB_MAC_INST *nr_mac,
                      NR_BWP_Downlink_t *bwp,
                      NR_ControlResourceSet_t *coreset,