Skip to content

O
OpenXG-RAN
Commit 263571b0 authored by ghaddab's avatar ghaddab
Browse files
Options 

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@5720 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 337df938
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 12537 deletions
targets/RTAI/LAUNCH_SCRIPTS/load_module.sh deleted 100644 → 0
View file @ 337df938
sh /opt/XIO2000/xio_script.sh
cd ../USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 4 1
rmmod -f openair_rf
cd ../..
make install_cbmimo1_softmodem_lte_emos_l2
cd LAUNCH_SCRIPTS
targets/RTAI/LAUNCH_SCRIPTS/nas_enb.sh deleted 100644 → 0
View file @ 337df938
#!/bin/sh
echo "start setting up eNB interface"
cd $OPENAIR2_DIR
sudo rmmod nasmesh
#make nasmesh_netlink_address_fix.ko
#make nasmesh_netlink.ko
#make nasmesh.ko
#make rb_tool
#route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
cd -
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.2 -r 3
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.1.1 -t 10.0.1.3 -r 11
echo "end setting up NAS interface"
targets/RTAI/LAUNCH_SCRIPTS/nas_ue.sh deleted 100644 → 0
View file @ 337df938
#!/bin/sh
echo "setting up UE NAS interface"
cd $OPENAIR2_DIR
sudo rmmod nasmesh
#make nasmesh_netlink_address_fix.ko
#make nasmesh_netlink.ko
#make nasmesh.ko
#make rb_tool
#route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
cd -
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
sudo ifconfig oai0 10.0.1.2 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.2 -t 10.0.1.1 -r 3
echo "end setting up NAS interface"
targets/RTAI/LAUNCH_SCRIPTS/nas_ue2.sh deleted 100644 → 0
View file @ 337df938
#!/bin/sh
echo "setting up UE NAS interface"
cd $OPENAIR2_DIR
sudo rmmod nasmesh
#make nasmesh_netlink_address_fix.ko
#make nasmesh_netlink.ko
#make nasmesh.ko
#make rb_tool
#route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
cd -
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
sudo ifconfig oai0 10.0.1.3 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.3 -t 10.0.1.1 -r 3
echo "end setting up NAS interface"
targets/RTAI/LAUNCH_SCRIPTS/start_eNb_mode1.sh deleted 100644 → 0
View file @ 337df938
sudo sh $OPENAIR1_DIR/xio_script.sh
sh stop_rf.sh
sh start_rf.sh
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 0 0 1 # dump Config
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 6 110 110 100 100 #Set TX gains
#$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 2 26 100 #Card v2_10 synched to v2_19
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 14 0 #SET RX RF Mode
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 32 1 #Set DLSCH Transmission Mod
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 1 0 0 #Start Primary Clusterhead
#$OPENAIR1_DIR/USERSPACE_TOOLS/SCOPE/lte_scope_ul 0 0 &
#$OPENAIR1_DIR/USERSPACE_TOOLS/SCOPE/lte_scope_ul 0 1 &
\ No newline at end of file
targets/RTAI/LAUNCH_SCRIPTS/start_eNb_mode2.sh deleted 100644 → 0
View file @ 337df938
sudo sh $OPENAIR1_DIR/xio_script.sh
sh stop_rf.sh
sh start_rf.sh
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 0 1 1
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 6 110 110 100 100
#$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 2 26 100 #Card v2_10 synched to v2_19
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 14 0
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 32 2
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 1 1 0
targets/RTAI/LAUNCH_SCRIPTS/start_eNb_mode6.sh deleted 100644 → 0
View file @ 337df938
cd USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 4 1
rmmod -f openair_rf
cd ../..
make install_cbmimo1_softmodem_lte_emos_l2
cd USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 0 1 1
./openair_rf_cbmimo1_lte 0 6 137 137 140 140
./openair_rf_cbmimo1_lte 0 14 2
./openair_rf_cbmimo1_lte 0 32 6
source /opt/XIO2000/xio_script.sh
./openair_rf_cbmimo1_lte 0 1 1 0
cd ../..
targets/RTAI/LAUNCH_SCRIPTS/start_emos.sh deleted 100644 → 0
View file @ 337df938
gpsd /dev/ttyUSB0
cd USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 4 1
rmmod -f openair_rf
cd ../..
make install_cbmimo1_softmodem_lte_emos_l2
cd EMOS/LTE/GUI
./emos_gui &
targets/RTAI/LAUNCH_SCRIPTS/start_rf.sh deleted 100644 → 0
View file @ 337df938
sudo insmod $OPENAIR2_DIR/RRC/LITE/MESSAGES/asn1_msg_kern.ko
sudo insmod $OPENAIR1_DIR/ARCH/CBMIMO1/DEVICE_DRIVER/openair_rf_softmodem.ko
\ No newline at end of file
targets/RTAI/LAUNCH_SCRIPTS/start_test_fs4.sh deleted 100644 → 0
View file @ 337df938
sh $OPENAIR1_DIR/xio_script.sh
cd ../USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 4 1
rmmod -f openair_rf
cd ../..
make install_cbmimo1_softmodem
cd USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 0 1 1
./openair_rf_cbmimo1_lte 0 26 100
./openair_rf_cbmimo1_lte 0 6 150 150 140 140
./openair_rf_cbmimo1_lte 0 14 0
./openair_rf_cbmimo1_lte 0 8 1
cd ../../LAUNCH_SCRIPTS
targets/RTAI/LAUNCH_SCRIPTS/start_ue.sh deleted 100644 → 0
View file @ 337df938
sudo sh $OPENAIR1_DIR/xio_script.sh
sh stop_rf.sh
sh start_rf.sh
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 0 0 1 # dump config
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 6 100 100 100 100 #Set TX gains
#./openair_rf_cbmimo1_lte 0 25 0
#./openair_rf_cbmimo1_lte 0 15 101 # Card v15 synched to card v38
#./openair_rf_cbmimo1_lte 0 15 117 # Card v15 synched to card v5
#./openair_rf_cbmimo1_lte 0 15 135 # Card v37 synched to card v5
#$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 15 89 # Card v42 synched to card v43
#$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 15 85 # Card v47 synched to card v43
#./openair_rf_cbmimo1_lte 0 26 400
#$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 15 103 # Card v47 synched to card v42
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 15 110 # Card v42 synched to card v47
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 14 0 #RF mode 0 = mixer low gain, lna off
#./openair_rf_cbmimo1_lte 0 14 1 #RF mode 1 = mixer low gain, lna on
#./openair_rf_cbmimo1_lte 0 14 2 #RF mode 2 = mixer high gain, lna on
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 3 1 0 #Start Node - param 0/1
targets/RTAI/LAUNCH_SCRIPTS/start_ue2.sh deleted 100644 → 0
View file @ 337df938
sudo sh $OPENAIR1_DIR/xio_script.sh
sh stop_rf.sh
sh start_rf.sh
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 0 0 1
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 6 100 100 100 100
#./openair_rf_cbmimo1_lte 0 25 0
#./openair_rf_cbmimo1_lte 0 15 101 # Card v15 synched to card v38
#./openair_rf_cbmimo1_lte 0 15 117 # Card v15 synched to card v5
#./openair_rf_cbmimo1_lte 0 15 135 # Card v37 synched to card v5
#./openair_rf_cbmimo1_lte 0 26 400
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 14 0 #RF mode 0 = mixer low gain, lna off
#./openair_rf_cbmimo1_lte 0 14 1 #RF mode 1 = mixer low gain, lna on
#./openair_rf_cbmimo1_lte 0 14 2 #RF mode 2 = mixer high gain, lna on
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 3 1 1
targets/RTAI/LAUNCH_SCRIPTS/stop_rf.sh deleted 100644 → 0
View file @ 337df938
killall lte_scope
killall lte_scope_ul
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 4 1
sudo rmmod -f nasmesh
sudo rmmod -f openair_rf
sudo rmmod -f asn1_msg_kern
targets/RTAI/Makefile deleted 100644 → 0
View file @ 337df938
# command line flags are automatically exported and thus passed down to any sub-make.
# here we set the default flags in case on command line flags are provided
# these flags have to be explicitely exported so that the sub-make is aware of them
ifndef OPENAIR_LTE
export OPENAIR_LTE=1
export OPENAIR_EMU=0
endif
ifndef OPENAIR1
export OPENAIR1=0
endif
ifndef OPENAIR2
export OPENAIR2=0
endif
ifndef OPENAIR3
export OPENAIR3=0
endif
ifndef EMOS
export EMOS=0
endif
ifndef rrc_cellular
export rrc_cellular = 0
export rrc_cellular_eNB = 0
export rrc_cellular_UE = 0
else
export rrc_cellular = 1
ifeq ($(eNB_flag),1)
export rrc_cellular_eNB=1
endif
ifeq ($(UE_flag),1)
export rrc_cellular_UE=1
endif
endif
all: openair_rf_cbmimo1_softmodem.ko asn1_msg_kern.ko nasmesh.ko rb_tool openair_rf scope
openair_rf_cbmimo1_softmodem.ko:
(cd $(OPENAIR1_DIR)/ARCH/CBMIMO1/DEVICE_DRIVER && $(MAKE) -C /usr/src/linux V=1 M=`pwd` RTAI=1 CBMIMO1=1 && mv openair_rf.ko $(CURDIR)/openair_rf_softmodem.ko)
oai_user_cbmimo1.ko:
(cd $(OPENAIR1_DIR)/ARCH/CBMIMO1/DEVICE_DRIVER && $(MAKE) -C /usr/src/linux V=1 M=`pwd` RTAI=1 CBMIMO1=1 BIT8_TX=1 OPENAIR1=0 OPENAIR2=0 && mv openair_rf.ko $(CURDIR)/openair_rf_softmodem.ko)
oai_user_exmimo.ko:
(cd $(OPENAIR1_DIR)/ARCH/CBMIMO1/DEVICE_DRIVER && $(MAKE) -C /usr/src/linux V=1 M=`pwd` RTAI=1 CBMIMO1=1 OPENAIR1=0 OPENAIR2=0 && mv openair_rf.ko $(CURDIR)/openair_rf_softmodem.ko)
asn1_msg_kern.ko:
(cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES && $(MAKE) -C /usr/src/linux V=0 M=`pwd` RTAI=1 -j2 && mv asn1_msg_kern.ko $(CURDIR)/asn1_msg_kern.ko)
nasmesh.ko:
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH && $(MAKE) V=1 -C /usr/src/linux M=`pwd` && mv nasmesh.ko $(CURDIR)/nasmesh.ko)
rb_tool:
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH/RB_TOOL && $(MAKE))
openair_rf:
(cd $(OPENAIR1_DIR)/USERSPACE_TOOLS/OPENAIR_RF && $(MAKE) clean CBMIMO1=1 && $(MAKE) all CBMIMO1=1 && $(MAKE) clean CBMIMO1=1)
scope:
(cd $(OPENAIR1_DIR)/USERSPACE_TOOLS/SCOPE && $(MAKE) clean && $(MAKE) all && $(MAKE) clean )
#Remove all but source files
cleanall:
(cd $(OPENAIR1_DIR) && $(MAKE) cleanall)
(cd $(OPENAIR2_DIR) && $(MAKE) cleanall)
fifos:
@for i in `seq 0 64`;\
do \
have_rtfX=`ls /dev/ |grep -c rtf$$i`;\
if [ "$$have_rtfX" -eq 0 ] ;then \
mknod -m 666 /dev/rtf$$i c 150 $$i; \
fi;\
done
openair0:
mknod /dev/openair0 c 127 0
chmod a+rw /dev/openair0
install_oai_user:
make fifos
insmod openair_rf_softmodem.ko
updatefw:
$(OPENAIR1_DIR)/USERSPACE_TOOLS/OAI_FW_INIT/updatefw -f $$OPENAIR0_DIR/express-mimo/software/sdr/main -s 0x43fffff0
boot_exmimo:
sudo make install_oai_user
$(OPENAIR1_DIR)/USERSPACE_TOOLS/OAI_FW_INIT/updatefw -f $$OPENAIR0_DIR/express-mimo/software/sdr/main -s 0x43fffff0
sleep 1
sudo rmmod openair_rf
sudo make install_oai_user
reboot_exmimo:
$(OPENAIR1_DIR)/USERSPACE_TOOLS/OAI_FW_INIT/updatefw -f $$OPENAIR0_DIR/express-mimo/software/sdr/main -s 0x43fffff0 -b
sudo rmmod openair_rf
sudo make install_oai_user
install_softmodem:
make fifos
ifeq ($(OPENAIR2),1)
insmod asn1_msg_kern.ko
endif
insmod openair_rf_softmodem.ko
remove:
rmmod openair_rf
ifeq ($(OPENAIR2),1)
rmmod asn1_msg_kern
endif
test:
(cd $(OPENAIR1_DIR)/ARCH/CBMIMO1/DEVICE_DRIVER && $(MAKE) test RTAI=1 CBMIMO1=1)
(cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES && $(MAKE) test)
clean:
(cd $(OPENAIR1_DIR)/ARCH/CBMIMO1/DEVICE_DRIVER && $(MAKE) clean RTAI=1 CBMIMO1=1)
(cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES && $(MAKE) clean)
targets/RTAI/USER/.runinfo deleted 100644 → 0
View file @ 337df938
sleeptest:lxrt+sem+mbx+msg+fifos:!./sleeptest;sleep 1;popall:control_c
synctest:lxrt+sem+mbx+msg+fifos:!./synctest -V;sleep 1;popall:control_c
condtest:lxrt+sem+mbx+msg+fifos:!sudo ./condtest;sleep 1;popall:control_c
msg_test:lxrt+sem+mbx+msg+fifos:!sudo ./msg_test;sleep 1;popall:control_c
msg_many:lxrt+sem+mbx+msg+fifos:!sudo ./msg_test;sleep 1;popall:control_c
eNB:lxrt+sem+mbx+msg+fifos:!sudo ./synctest;sleep 1;popall:control_c
eNB_test:lxrt+sem+mbx+msg+smi:!sudo ./lte-softmodem -S -F enb2tx;sleep 1;popall:control_c
UE:lxrt+sem+mbx+msg+fifos:!sudo ./synctest -U -d -T 108;sleep 1;popall:control_c
#UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907602944 -V;sleep 1;popall:control_c
#EXMIMO2 card 1
#UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600480 -V;sleep 1;popall:control_c
UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600480 -V -K /tmp/itti_UE0.log;sleep 1;popall:control_c
#EXMIMO2 card 5
#UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907597240 -V;sleep 1;popall:control_c
#EXMIMO2 card 24
#UE0_smbv:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907595776 -V;sleep 1;popall:control_c
#EXMIMO2 card 5?
UE0_smbv:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907598252 -V;sleep 1;popall:control_c
UE850:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 859498000 -F ex2_850;sleep 1;popall:control_c
eNB850:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -d -C 730000000; sleep 1;popall:control_c
UE0noL2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600480 --no-L2-connect;sleep 1;popall:control_c
UE0calib:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1912600000 --calib-ue-rx -70 ;sleep 1;popall:control_c
UE0calibmed:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1912600000 --calib-ue-rx-med -70 ;sleep 1;popall:control_c
UE0calibbyp:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1912600000 --calib-ue-rx-byp -70 ;sleep 1;popall:control_c
UE0prach:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1912606900 -F ue1 --debug-ue-prach;sleep 1;popall:control_c
UE1:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue1 ;sleep 1;popall:control_c
UE1prach:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue1 --debug-ue-prach;sleep 1;popall:control_c
UE1noL2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue1 --no-L2-connect;sleep 1;popall:control_c
UE2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue2;sleep 1;popall:control_c
UE2prach:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue2 --debug-ue-prach;sleep 1;popall:control_c
UE2noL2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue2 --no-L2-connect;sleep 1;popall:control_c
#eNB0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 1907600000 -d -V;sleep 1;popall:control_c
#eNB0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 1907598252 -d -V;sleep 1;popall:control_c
eNB0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -d -O../../PROJECTS/GENERIC-LTE-EPC/CONF/enb.sfr.sud.conf -V -K /tmp/itti_eNB0.log;sleep 1;popall:control_c
eNB1:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 1907600000 -F ex2_2 -d;sleep 1;popall:control_c
eNB2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 1907600000 -F ue2 -d;sleep 1;popall:control_c
dot11:lxrt+sem+mbx+msg+fifos:!sudo ./dot11 -C 1907600000 -d;sleep 1;popall:control_c
dot11_tx_test: lxrt+sem+mbx+msg+fifos:!sudo ./dot11 -C 1907600000 -d -t;sleep 1;popall:control_c
eNB2_750:lxrt+sem+mbx+msg+fifos:!sudo ./synctest_eNB -C 746000000 -F enb1tx_750 -d;sleep 1;popall:control_c
eNB2_1900:lxrt+sem+mbx+msg+fifos:!sudo ./synctest_eNB -C 19076000000 -F enb1tx_1900 -d;sleep 1;popall:control_c
emos-raw:lxrt+sem+mbx+msg+fifos:!sudo ./emos-raw -d -V;sleep 1;popall:control_c
targets/RTAI/USER/Makefile deleted 100644 → 0
View file @ 337df938
# Include some shared directives
include $(OPENAIR_TARGETS)/Makerules
default: lte-softmodem
all: lte-softmodem lte-enb
include $(OPENAIR_TARGETS)/Makefile.common
GCCVERSION = $(shell gcc --version | grep ^gcc | sed 's/^.* //g')
ifeq "$(GCCVERSION)" "4.4.3"
CFLAGS += -Wno-packed-bitfield-compat
endif
ifeq "$(GCCVERSION)" "4.5.2"
CFLAGS += -Wno-packed-bitfield-compat
endif
ifeq "$(GCCVERSION)" "4.6.1"
CFLAGS += -Wno-packed-bitfield-compat
endif
CFLAGS += -O2
CFLAGS += -DDRIVER2013 -I$(OPENAIR_TARGETS)/ARCH/EXMIMO/USERSPACE/LIB/ -I$(OPENAIR_TARGETS)/ARCH/EXMIMO/DEFS -DENABLE_VCD_FIFO
ifdef DEBUG
CFLAGS += -g -ggdb
endif
SRC = synctest.c condtest.c #lte-softmodem.c
ifndef RTAI
RTAI=1
endif
ifndef USRP
USRP=0
endif
ifeq ($(ENABLE_RAL), 1)
CFLAGS += -DENABLE_RAL
endif
ifeq ($(RTAI),1)
CFLAGS += -DENABLE_RTAI_CLOCK
CFLAGS += -DCONFIG_RTAI_LXRT_INLINE #remend the RTAI warning
RTAI_OBJ = sched_dlsch.o sched_ulsch.o sched_rx_pdsch.o rt_wrapper.o
ifeq ($(USRP),1)
RTAI_OBJ += lte-softmodem-usrp.o
endif
else #RTAI
CFLAGS += -DENABLE_USE_CPU_EXECUTION_TIME
OBJ += sched_dlsch.o sched_ulsch.o sched_rx_pdsch.o rt_wrapper.o
ifeq ($(USRP),1)
OBJ += lte-softmodem-usrp.o
endif
endif
OBJ += $(OPENAIR1_DIR)/SIMULATION/TOOLS/taus.o $(OPENAIR_TARGETS)/SIMU/USER/init_lte.o #$(OPENAIR_TARGETS)/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.o
ifeq ($(USRP),1)
include $(OPENAIR_TARGETS)/ARCH/USRP/USERSPACE/LIB/Makefile.inc
endif
OBJ += $(OPENAIR_TARGETS)/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.o $(OPENAIR_TARGETS)/ARCH/EXMIMO/USERSPACE/LIB/gain_control.o
CFLAGS += -DDRIVER2013 -I$(OPENAIR_TARGETS)/ARCH/EXMIMO/USERSPACE/LIB/ -I$(OPENAIR_TARGETS)/ARCH/EXMIMO/DEFS -DENABLE_VCD_FIFO
TOP_DIR = $(OPENAIR1_DIR)
include $(OPENAIR1_DIR)/PHY/Makefile.inc
include $(OPENAIR1_DIR)/SCHED/Makefile.inc
OBJ += $(PHY_OBJS)
ifeq ($(RTAI),1)
RTAI_OBJ += $(SCHED_OBJS)
else
OBJ += $(SCHED_OBJS)
endif
OPENAIR2_TOP = $(OPENAIR2_DIR)
include $(OPENAIR2_DIR)/LAYER2/Makefile.inc
include $(OPENAIR2_DIR)/UTIL/Makefile.inc
include $(OPENAIR2_DIR)/RRC/NAS/Makefile.inc
include $(OPENAIR2_DIR)/ENB_APP/Makefile.inc
include $(OPENAIR3_DIR)/RAL-LTE/Makefile.inc
OBJ += $(ENB_APP_OBJS)
ifeq ($(RTAI),1)
LOG_OBJS=
RTAI_OBJ+=$(LOG_DIR)/vcd_signal_dumper.o
RTAI_OBJ+=$(LOG_DIR)/log.o
endif
include $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.inc
OBJ += $(LOG_OBJS)
ifndef OPENAIR2
OPENAIR2=1
endif
ifeq ($(OPENAIR2),1)
ASN1_MSG_OBJS1=$(addprefix $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/, $(ASN1_MSG_OBJS))
OBJ += $(L2_OBJS) $(LIST_OBJ) $(TIMER_OBJ) $(MEM_OBJ) $(OTG_OBJS) $(MATH_OBJS)
OBJ += $(OPENAIR1_DIR)/SIMULATION/ETH_TRANSPORT/netlink_init.o
#OBJ += $(PDCP_DIR)/pdcp_thread.o
CFLAGS += -DOPENAIR2 -DNO_RRM -DPUCCH -DMAC_CONTEXT=1
endif
ifdef ENABLE_ITTI
RTAI_OBJ += $(UTILS_OBJS)
CFLAGS += -DEXMIMO_IOT
endif
CFLAGS += $(L2_incl) $(ENB_APP_incl) $(UTIL_incl) $(UTILS_incl)
CFLAGS += -I$(OPENAIR1_DIR) -I$(OPENAIR2_DIR)/RRC/LITE/MESSAGES #-I$(OPENAIR3_DIR)/MESH -I$(OPENAIR3_DIR)/MESH/RRM
CFLAGS += -DNEW_FFT -DLOG_NO_THREAD
ifeq ($(XFORMS),1)
CFLAGS += -DXFORMS -I/usr/include/X11
LDFLAGS += -lforms
OBJ += $(OPENAIR1_DIR)/PHY/TOOLS/lte_phy_scope.o
OBJ += stats.o
endif
OBJ_SYNC = $(OPENAIR_TARGETS)/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.o rt_wrapper.o $(OPENAIR2_DIR)/UTIL/LOG/log.o $(OPENAIR2_DIR)/UTIL/LOG/vcd_signal_dumper.o
ifdef SMBV
CFLAGS += -DSMBV
endif
#CPUFLAGS = -mmmx -msse -msse2 -m32 -mssse3 -msse4.1
CPUFLAGS = -mmmx -msse -msse2 -mssse3 -msse4.1
#CFLAGS += -fno-common -mpreferred-stack-boundary=4
CFLAGS += -Wall -fno-strict-aliasing -DPHYSIM -DUSER_MODE -DPC_TARGET -DPC_DSP -DNB_ANTENNAS_RX=2 -DNB_ANTENNAS_TXRX=2 -DNB_ANTENNAS_TX=2 -DPHY_CONTEXT=1 -rdynamic $(CPUFLAGS) # -Wno-packed-bitfield-compat
CFLAGS += -DOPENAIR_LTE -DENABLE_FXP -DOPENAIR1 -DDLSCH_THREAD #-DULSCH_THREAD
#only for CBMIMO1
ifdef CBMIMO1
CFLAGS += -DFW2011 -DBIT8_TX -DCBMIMO1
else
#only for EXPRESS MIMO
CFLAGS += -DEXMIMO
#CFLAGS += -DEXMIMO -DTIMING_ADVANCE_HW=138 #this is for ExpressMIMO 1
#CFLAGS += -DEXMIMO -DTIMING_ADVANCE_HW=45 #this is for ExpressMIMO 2
endif
ifeq ($(HARD_RT),1)
CFLAGS += -DHARD_RT
endif
ifeq ($(EMOS),1)
CFLAGS += -D_FILE_OFFSET_BITS=64 -DEMOS #-DEMOS_CHANNEL
LDFLAGS += -lgps
endif
ifeq ($(NAS),1)
CFLAGS += -DNAS_NETLINK -DLINUX
OBJ += $(NAS_OBJS)
endif
LDFLAGS += -lpthread -lm -lforms -lconfig
ifeq ($(RTAI),1)
RTAI_CFLAGS += $(shell rtai-config --lxrt-cflags) -DRTAI
LDFLAGS += $(shell rtai-config --lxrt-ldflags)
ifdef ENABLE_ITTI
LDFLAGS += -lrt
endif
else
LDFLAGS += -lrt
endif
ifeq ($(USRP),1)
CFLAGS += -I/opt/uhd/include -L/opt/uhd/lib -luhd -lpthread -lstdc++
CFLAGS += -DUSRP
endif
#CFLAGS += -I/usr/include/c++/4.6 -I/usr/include/c++/4.6/x86_64-linux-gnu -I/usr/include/rtai/
LFDS_OBJ_DIR = $(subst $(OPENAIR_HOME),$(OBJS_DIR),$(LFDS_DIR))
LFDS_LIB = $(LFDS_OBJ_DIR)/bin/liblfds611.a
LIBS += $(LFDS_LIB)
SHARED_DEPENDENCIES += $(LFDS_LIB)
-include $(OBJ:.o=.d)
-include $(ASN1_MSG_OBJS1:.o=.d)
-include $(RTAI_OBJ:.o=.d)
-include lte-softmodem.d
-include lte-enb.d
$(LFDS_LIB):
@if [ ! -d $(LFDS_OBJ_DIR)/bin ]; then mkdir -p $(LFDS_OBJ_DIR)/bin; fi;
@if [ ! -d $(LFDS_OBJ_DIR)/obj ]; then mkdir -p $(LFDS_OBJ_DIR)/obj; fi;
$(MAKE) -C $(LFDS_DIR) -f makefile.linux OUTDIR=$(LFDS_OBJ_DIR)
ifeq ($(RTAI),1)
$(RTAI_OBJ) lte-enb.o lte-softmodem.o: %.o : %.c
else
$(RTAI_OBJ): %.o : %.c
endif
@echo Compiling $< ...
@$(CC) -c $(CFLAGS) $(EXTRA_CFLAGS) $(RTAI_CFLAGS) -o $@ $<
@$(CC) -MM $(CFLAGS) $(EXTRA_CFLAGS) $(RTAI_CFLAGS) $< > $*.d
@mv -f $*.d $*.d.tmp
@sed -e 's|.*:|$*.o:|' < $*.d.tmp > $*.d
@sed -e 's/.*://' -e 's/\\$$//' < $*.d.tmp | fmt -1 | \
sed -e 's/^ *//' -e 's/$$/:/' >> $*.d
@rm -f $*.d.tmp
ifdef ENABLE_ITTI
$(OBJ) $(RTAI_OBJ): $(ITTI_MESSAGES_H)
endif
ifeq ($(RTAI),1)
$(OBJ) $(ASN1_MSG_OBJS1): %.o : %.c
else
$(OBJ) $(ASN1_MSG_OBJS1) lte-enb.o lte-softmodem.o: %.o : %.c
endif
@echo Compiling $< ...
@$(CC) -c $(CFLAGS) $(EXTRA_CFLAGS) -o $@ $<
@$(CC) -MM $(CFLAGS) $(EXTRA_CFLAGS) $< > $*.d
@mv -f $*.d $*.d.tmp
@sed -e 's|.*:|$*.o:|' < $*.d.tmp > $*.d
@sed -e 's/.*://' -e 's/\\$$//' < $*.d.tmp | fmt -1 | \
sed -e 's/^ *//' -e 's/$$/:/' >> $*.d
@rm -f $*.d.tmp
OBJ_EMOS = $(OPENAIR_TARGETS)/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.o $(OPENAIR_TARGETS)/ARCH/EXMIMO/USERSPACE/LIB/gain_control.o rt_wrapper.o $(OPENAIR2_DIR)/UTIL/LOG/log.o $(OPENAIR2_DIR)/UTIL/LOG/vcd_signal_dumper.o $(OPENAIR1_DIR)/PHY/TOOLS/signal_energy.o $(OPENAIR1_DIR)/PHY/TOOLS/dB_routines.o
ifeq ($(XFORMS),1)
OBJ_EMOS+=lte_scope.o
endif
$(USRP_OBJ):$(USRP_FILE_OBJ)
@echo Compiling openair_usrp.cpp
@$(CXX) -c $(USRP_CFLAGS) $(USRP_FILE_OBJ) -o $(USRP_OBJ)
condtest: condtest.c
$(CC) $(CFLAGS) $(LDFLAGS) condtest.c -o condtest
synctest: $(OBJ_SYNC) $(SHARED_DEPENDENCIES) synctest.c
$(CC) $(CFLAGS) $(EXTRA_CFLAGS) $(RTAI_CFLAGS) $(OBJ_SYNC) -o synctest synctest.c $(LDFLAGS) $(LIBS)
sleeptest: rt_wrapper.o sleeptest.c
$(CC) $(CFLAGS) $(EXTRA_CFLAGS) $(RTAI_CFLAGS) rt_wrapper.o -o sleeptest sleeptest.c $(LDFLAGS)
lte-softmodem: $(OBJ) $(ASN1_MSG_OBJS1) $(RTAI_OBJ) lte-softmodem.o $(SHARED_DEPENDENCIES)
@echo Linking $@
@$(CC) $(CFLAGS) $(EXTRA_CFLAGS) $(OBJ) $(RTAI_OBJ) $(ASN1_MSG_OBJS1) lte-softmodem.o -o lte-softmodem $(LDFLAGS) $(LIBS)
lte-enb: $(OBJ) $(ASN1_MSG_OBJS1) $(RTAI_OBJ) lte-enb.o $(SHARED_DEPENDENCIES)
@echo Linking $@
@$(CC) $(CFLAGS) $(EXTRA_CFLAGS) $(OBJ) $(RTAI_OBJ) $(ASN1_MSG_OBJS1) lte-enb.o -o lte-enb $(LDFLAGS) $(LIBS)
lte-softmodem-usrp: $(OBJ) $(ASN1_MSG_OBJS1) $(RTAI_OBJ) $(USRP_OBJ) $(SHARED_DEPENDENCIES)
@echo Linking $@
@$(CC) $(USRP_OBJ) $(CFLAGS) $(OBJ) $(RTAI_OBJ) $(ASN1_MSG_OBJS1) -o lte-softmodem-usrp $(LDFLAGS) $(LIBS)
emos-raw: $(SHARED_DEPENDENCIES) $(OBJ_EMOS) emos-raw.c
@$(CC) $(CFLAGS) $(EXTRA_CFLAGS) $(RTAI_CFLAGS) $(OBJ_EMOS) -o emos-raw emos-raw.c $(LDFLAGS) $(LIBS)
synctest_eNB: synctest
cp synctest synctest_eNB
synctest_UE: synctest
cp synctest synctest_UE
drivers:
cd $(OPENAIR2_DIR) && make clean && make nasmesh_netlink.ko
cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH/RB_TOOL && make clean && make
cd $(OPENAIR_TARGETS)/ARCH/EXMIMO/DRIVER/eurecom && make clean && make
cd $(OPENAIR_TARGETS)/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT && make clean && make
run: condtest
rtai-load condtest --verbose
run_eNB_test:
rtai-load eNB_test --verbose
run_eNB:
rtai-load eNB --verbose
run_UE:
rtai-load UE --verbose
run_UE0:
rtai-load UE0 --verbose
run_UE0_smbv:
rtai-load UE0_smbv --verbose
run_UE850:
rtai-load UE850 --verbose
run_eNB850:
rtai-load eNB850 --verbose
run_UE0prach:
rtai-load UE0prach --verbose
run_UE1prach:
rtai-load UE1prach --verbose
run_UE2prach:
rtai-load UE2prach --verbose
run_UE0noL2:
rtai-load UE0noL2 -- verbose
run_UE1noL2:
rtai-load UE1noL2 --verbose
run_UE2noL2:
rtai-load UE2noL2 --verbose
run_UE0calib:
rtai-load UE0calib --verbose
run_UE0calibmed:
rtai-load UE0calibmed --verbose
run_UE0calibbyp:
rtai-load UE0calibbyp --verbose
run_UE1:
rtai-load UE1 --verbose
run_UE2:
rtai-load UE2 --verbose
run_eNB0:
rtai-load eNB0 --verbose
run_eNB1:
rtai-load eNB1 --verbose
run_eNB2:
rtai-load eNB2 --verbose
clean: common-clean
@$(RM_F_V) $(OBJ) $(RTAI_OBJ) $(OBJ_EMOS) $(OBJ_SYNC)
@$(RM_F_V) $(OBJ:.o=.d) $(RTAI_OBJ:.o=.d) $(OBJ_EMOS:.o=.d) $(OBJ_SYNC:.o=.d)
@$(RM_F_V) $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1_msg.o $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1_msg.d
@$(RM_F_V) lte-enb.o lte-enb.d lte-softmodem.o lte-softmodem.d
@$(RM_F_V) lte-enb.o lte-softmodem.o
cleanasn1:
rm -f $(ASN1_MSG_OBJS1)
$(shell cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES ; rm -f $(ASN_MODULE_SOURCES) $(ASN_MODULE_HEADERS) *.o *.d )
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.am.sample
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.inc.generated
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel8
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel10
cleancell:
rm -f $(OPENAIR2_DIR)/RRC/CELLULAR/*.o
rm -f $(OPENAIR2_DIR)/RRC/CELLULAR/*.d
rm -f $(OPENAIR2_DIR)/RRC/L2_INTERFACE/*.o
rm -f $(OPENAIR2_DIR)/RRC/L2_INTERFACE/*.d
rm -f $(OPENAIR2_DIR)/NAS/SIMU_CELLULAR/*.o
rm -f $(OPENAIR2_DIR)/NAS/SIMU_CELLULAR/*.d
cleanalmostall: clean
rm -f $(ASN1_MSG_OBJS1)
rm -rf condtest synctest lte-softmodem
rm -rf synctest_eNB synctest_UE
cleanall: common-cleanall clean cleanasn1
rm -rf condtest synctest lte-softmodem lte-softmodem-usrp
rm -rf synctest_eNB synctest_UE
show:
@echo $(CFLAGS)
@echo $(EXTRA_CFLAGS)
@echo $(OBJ) $(RTAI_OBJ)
@echo $(USRP_OBJ)
@echo IS_REL8 is $(IS_REL8)
@echo IS_REL10 is $(IS_REL10)
beautiful:
astyle --style=gnu -s2 $(SRC)
targets/RTAI/USER/Makefile.agilent deleted 100644 → 0
View file @ 337df938
include $(OPENAIR_TARGETS)/Makerules
include $(OPENAIR_TARGETS)/Makefile.common
GCCVERSION = $(shell gcc --version | grep ^gcc | sed 's/^.* //g')
ifeq "$(GCCVERSION)" "4.4.3"
CFLAGS += -Wno-packed-bitfield-compat
endif
ifeq "$(GCCVERSION)" "4.5.2"
CFLAGS += -Wno-packed-bitfield-compat
endif
ifeq "$(GCCVERSION)" "4.6.1"
CFLAGS += -Wno-packed-bitfield-compat
endif
CFLAGS += -O2
# Debug
CFLAGS += -g -ggdb
CFLAGS += -DDRIVER2013 -I$(OPENAIR_TARGETS)/ARCH/EXMIMO/USERSPACE/LIB/ -I$(OPENAIR_TARGETS)/ARCH/EXMIMO/DEFS -DENABLE_VCD_FIFO -DEXMIMO_IOT
SRC = lte-enb.c
ifndef RTAI
RTAI=1
endif
ifeq ($(RTAI),1)
CFLAGS += -DENABLE_RTAI_CLOCK -DRTAI
RTAI_OBJ = sched_dlsch.o sched_ulsch.o sched_rx_pdsch.o lte-enb.o rt_wrapper.o
else
OBJ = sched_dlsch.o sched_ulsch.o sched_rx_pdsch.o lte-enb.o rt_wrapper.o
CFLAGS += -DENABLE_USE_CPU_EXECUTION_TIME
endif
OBJ += $(OPENAIR1_DIR)/SIMULATION/TOOLS/taus.o $(OPENAIR_TARGETS)/SIMU/USER/init_lte.o $(OPENAIR_TARGETS)/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.o
TOP_DIR = $(OPENAIR1_DIR)
include $(OPENAIR1_DIR)/PHY/Makefile.inc
include $(OPENAIR1_DIR)/SCHED/Makefile.inc
OBJ += $(PHY_OBJS)
ifeq ($(RTAI),1)
RTAI_OBJ += $(SCHED_OBJS)
else
OBJ += $(SCHED_OBJS)
endif
#ifndef rrc_cellular
ifeq ($(rrc_cellular),0)
rrc_cellular = 0
rrc_cellular_eNB = 0
rrc_cellular_UE = 0
else
ifeq ($(eNB_flag),1)
rrc_cellular_eNB=1
endif
ifeq ($(UE_flag),1)
rrc_cellular_UE=1
endif
endif
export rrc_cellular
OPENAIR2_TOP = $(OPENAIR2_DIR)
include $(OPENAIR2_DIR)/LAYER2/Makefile.inc
include $(OPENAIR2_DIR)/UTIL/Makefile.inc
include $(OPENAIR2_DIR)/RRC/NAS/Makefile.inc
ifeq ($(RTAI),1)
LOG_OBJS=
RTAI_OBJ+=$(LOG_DIR)/vcd_signal_dumper.o
RTAI_OBJ+=$(LOG_DIR)/log.o
endif
include $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.inc
OBJ += $(LOG_OBJS)
ifndef OPENAIR2
OPENAIR2=1
endif
ifeq ($(OPENAIR2),1)
ASN1_MSG_OBJS1=$(addprefix $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/, $(ASN1_MSG_OBJS))
OBJ += $(L2_OBJS) $(LIST_OBJ) $(TIMER_OBJ) $(MEM_OBJ) $(OTG_OBJS) $(MATH_OBJS)
OBJ += $(OPENAIR1_DIR)/SIMULATION/ETH_TRANSPORT/netlink_init.o
OBJ += $(PDCP_DIR)/pdcp_thread.o
CFLAGS += -DOPENAIR2 -DNO_RRM -DPUCCH -DMAC_CONTEXT=1
endif
CFLAGS += $(L2_incl) $(UTIL_incl) $(UTILS_incl)
CFLAGS += -I$(OPENAIR1_DIR) -I$(OPENAIR2_DIR)/RRC/LITE/MESSAGES #-I$(OPENAIR3_DIR)/MESH -I$(OPENAIR3_DIR)/MESH/RRM
CFLAGS += -DNEW_FFT -DLOG_NO_THREAD
ifeq ($(XFORMS),1)
CFLAGS += -DXFORMS -I/usr/include/X11
LDFLAGS += -lforms
OBJ += $(OPENAIR1_DIR)/PHY/TOOLS/lte_phy_scope.o
OBJ += stats.o
endif
ifdef SMBV
CFLAGS += -DSMBV
endif
#CPUFLAGS = -mmmx -msse -msse2 -m32 -mssse3 -msse4.1
CPUFLAGS = -mmmx -msse -msse2 -mssse3 -msse4.1
#CFLAGS += -fno-common -mpreferred-stack-boundary=4
CFLAGS += -Wall -fno-strict-aliasing -DPHYSIM -DUSER_MODE -DPC_TARGET -DPC_DSP -DNB_ANTENNAS_RX=2 -DNB_ANTENNAS_TXRX=2 -DNB_ANTENNAS_TX=2 -DPHY_CONTEXT=1 -rdynamic $(CPUFLAGS) # -Wno-packed-bitfield-compat
CFLAGS += -DOPENAIR_LTE -DENABLE_FXP -DOPENAIR1 -DDLSCH_THREAD #-DULSCH_THREAD
#only for CBMIMO1
ifdef CBMIMO1
CFLAGS += -DFW2011 -DBIT8_TX -DCBMIMO1
else
#only for EXPRESS MIMO
CFLAGS += -DEXMIMO
#CFLAGS += -DEXMIMO -DTIMING_ADVANCE_HW=138 #this is for ExpressMIMO 1
#CFLAGS += -DEXMIMO -DTIMING_ADVANCE_HW=45 #this is for ExpressMIMO 2
endif
ifndef HARD_RT
HARD_RT=1
endif
ifeq ($(HARD_RT),1)
CFLAGS += -DHARD_RT
endif
ifeq ($(EMOS),1)
CFLAGS += -DEMOS -DEMOS_CHANNEL
LDFLAGS += -lgps
endif
ifndef NAS
NAS=1
endif
ifeq ($(NAS),1)
CFLAGS += -DNAS_NETLINK -DLINUX
OBJ += $(NAS_OBJS)
endif
RTAI_CFLAGS += $(shell rtai-config --lxrt-cflags)
CFLAGS += -I/usr/realtime/include -DRTAI
LDFLAGS += -lpthread -lm -lforms
ifeq ($(RTAI),1)
LDFLAGS += $(shell rtai-config --lxrt-ldflags)
else
LDFLAGS += -lrt
endif
#ifndef USE_MME
# USE_MME=R8
#endif
ifdef USE_MME
include $(OPENAIR2_DIR)/S1AP/Makefile.inc
include $(OPENAIR2_DIR)/S1AP/MESSAGES/Makefile.inc
CFLAGS += -DENABLE_USE_MME -DENB_MODE
LDFLAGS += -lsctp
CFLAGS_S1AP += -DENB_MODE -DENABLE_USE_MME -DEMIT_ASN_DEBUG=1 -DUSER_MODE
S1AP_BUILT_OBJS += $(S1AP_OBJS) $(addprefix $(OPENAIR2_DIR)/S1AP/MESSAGES/, $(S1AP_ASN_MODULE_SOURCES))
S1AP_BUILT_OBJS += $(OPENAIR3_DIR)/OPENAIRMME/SCTP/sctp_primitives_client.o
endif
ASN1RELDIR=R9.8
ifeq ($(USE_MME), R8)
ASN1RELDIR=R8.10
else
CFLAGS_S1AP += -DUPDATE_RELEASE_9
endif
S1AP_DIR=$(OPENAIR2_DIR)/S1AP
ASN1MESSAGESDIR=$(S1AP_DIR)/MESSAGES
ASN1DIR=$(ASN1MESSAGESDIR)/ASN1
all: lte-enb
$(LFDS_DIR)/bin/liblfds611.a:
$(MAKE) -C $(LFDS_DIR) -f makefile.linux
$(RTAI_OBJ): %.o : %.c
@echo Compiling $< ...
@$(CC) -c $(CFLAGS) $(EXTRA_CFLAGS) $(RTAI_CFLAGS) -o $@ $<
$(OBJ) $(ASN1_MSG_OBJS1): %.o : %.c
@echo Compiling $< ...
@$(CC) -c $(CFLAGS) $(EXTRA_CFLAGS) -o $@ $<
$(S1AP_BUILT_OBJS): %.o : %.c
@echo Compiling $<
@$(CC) -Wall -c $(CFLAGS_S1AP) $(S1AP_Incl) $(UTIL_incl) -o $@ $<
$(ASN1MESSAGESDIR)/s1ap_ieregen.stamp: $(ASN1DIR)/$(ASN1RELDIR)/S1AP-PDU-Contents.asn $(ASN1DIR)/asn1tostruct.py
echo Timestamp > $@
(cd $(ASN1DIR) && python $(ASN1DIR)/asn1tostruct.py -f$<)
$(ASN1MESSAGESDIR)/s1ap_asn1regen.stamp: $(ASN1DIR)/$(ASN1RELDIR)/S1AP-CommonDataTypes.asn $(ASN1DIR)/$(ASN1RELDIR)/S1AP-Constants.asn $(ASN1DIR)/$(ASN1RELDIR)/S1AP-IEs.asn $(ASN1DIR)/$(ASN1RELDIR)/S1AP-PDU.asn
echo Timestamp > $@
(cd $(ASN1MESSAGESDIR) && asn1c -gen-PER -fnative-types -fskeletons-copy $^)
$(S1AP_DIR)/libs1ap.a: $(ASN1MESSAGESDIR)/s1ap_ieregen.stamp $(ASN1MESSAGESDIR)/s1ap_asn1regen.stamp $(S1AP_BUILT_OBJS)
@echo Creating $@
$(AR) rcs $@ $^
$(LFDS_DIR)/bin/liblfds611.a:
$(MAKE) -C $(LFDS_DIR) -f makefile.linux
ifdef USE_MME
lte-enb: $(OBJ) $(S1AP_DIR)/libs1ap.a $(ASN1_MSG_OBJS1) $(RTAI_OBJ) $(LFDS_DIR)/bin/liblfds611.a
else
lte-enb: $(OBJ) $(ASN1_MSG_OBJS1) $(RTAI_OBJ) $(LFDS_DIR)/bin/liblfds611.a
endif
$(CC) $(CFLAGS) $(EXTRA_CFLAGS) $(OBJ) $(RTAI_OBJ) $(ASN1_MSG_OBJS1) -o lte-enb $(LDFLAGS) $(LFDS_DIR)/bin/liblfds611.a
nasmesh:
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH/RB_TOOL && $(MAKE))
(cd $(OPENAIR2_DIR) && $(MAKE) nasmesh_netlink.ko)
(sudo insmod $(OPENAIR2_DIR)/NAS/DRIVER/MESH/nasmesh.ko)
rb_tool:
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH/RB_TOOL && $(MAKE))
nasmesh_install:
(sudo rmmod nasmesh)
(sudo insmod $(OPENAIR2_DIR)/NAS/DRIVER/MESH/nasmesh.ko)
clean:
rm -rf $(OBJ) $(RTAI_OBJ)
rm -f $(S1AP_BUILT_OBJS)
rm -f $(ASN1MESSAGESDIR)/libs1ap.a
cleanasn1:
rm -f $(ASN1_MSG_OBJS1)
$(shell cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES ; rm -f $(ASN_MODULE_SOURCES) $(ASN_MODULE_HEADERS) *.o *.d )
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.am.sample
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.inc.generated
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel8
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel10
cleanall: clean cleanasn1
rm -rf condtest synctest lte-softmodem
rm -rf synctest_eNB synctest_UE
show:
@echo $(CFLAGS)
@echo $(EXTRA_CFLAGS)
@echo $(OBJ) $(RTAI_OBJ)
@echo rrc_cellular variable is $(rrc_cellular)
@echo eNB_flag is $(eNB_flag)
@echo UE_flag is $(UE_flag)
@echo IS_REL8 is $(IS_REL8)
@echo IS_REL10 is $(IS_REL10)
beautiful:
astyle --style=gnu -s2 $(SRC)
targets/RTAI/USER/Makefile.msg_many deleted 100644 → 0
View file @ 337df938
CFLAGS = $(shell rtai-config --lxrt-cflags)
LDFLAGS = $(shell rtai-config --lxrt-ldflags) -lpthread -llxrt -lm
CFLAGS += -D__IN_RTAI__ -Wall -O2 -I.
OBJS = msg_many.o msg_helper.o
all: msg_many
msg_many: $(OBJS)
$(CC) $(LDFLAGS) -o $@ $(OBJS)
$(OBJS): msg_many.h
run: msg_many
rtai-load msg_many --verbose
.PHONY: clean
clean:
rm -f msg_many $(OBJS)
targets/RTAI/USER/TOOLS/thread_ipc.c deleted 100644 → 0
View file @ 337df938
#include <stdio.h>
#include <errno.h>
#include <string.h>
#include <stdlib.h>
#include <pthread.h>
#include <sched.h>
#include "thread_ipc.h"
g_thread_ipc_t thread_ipc = {0};
void loop_buffer_reset(buffer_t *loop_buf)
{
int i;
for (i = 0; i < BUFFERMAX; i++) {
loop_buf[i].subframe_num = -1;
}
return;
}
static void loop_buffer_init(loop_buffer_op_t *loop_buffer)
{
loop_buffer->packet_num = 0;
loop_buffer->isfull = 0;
loop_buffer->isempty = 1;
pthread_mutex_init(&loop_buffer->buffer_mutex, NULL);
pthread_cond_init(&loop_buffer->full_cond, NULL);
pthread_cond_init(&loop_buffer->empty_cond, NULL);
loop_buffer_reset(loop_buffer->loop_buf);
return;
}
static void sync_buffer_init(sync_buffer_t *sync_buffer)
{
sync_buffer->decoding_subframe_num = 0;
pthread_mutex_init(&sync_buffer->buffer_mutex, NULL);
return;
}
int thread_ipc_init(void)
{
//printf("recv %d\n", thread_ipc.sync_buffer.decoding_subframe_num);
thread_ipc.ue_sync_state = 0;
thread_ipc.rx_timestamp = 0;
thread_ipc.tx_timestamp = 0;
thread_ipc.current_subframe = 0;
pthread_mutex_init(&thread_ipc.dl_decode_mutex, NULL);
pthread_mutex_lock(&thread_ipc.dl_decode_mutex);
pthread_mutex_init(&thread_ipc.ul_send_mutex, NULL);
pthread_mutex_lock(&thread_ipc.ul_send_mutex);
pthread_mutex_init(&thread_ipc.sync_mutex, NULL);
pthread_mutex_lock(&thread_ipc.sync_mutex);
loop_buffer_init(&thread_ipc.loop_buffer);
sync_buffer_init(&thread_ipc.sync_buffer);
return 0;
}
int thread_ipc_deinit(void)
{
pthread_mutex_destroy(&thread_ipc.ul_send_mutex);
pthread_mutex_destroy(&thread_ipc.sync_mutex);
pthread_mutex_destroy(&thread_ipc.dl_decode_mutex);
pthread_mutex_destroy(&thread_ipc.loop_buffer.buffer_mutex);
pthread_cond_destroy(&thread_ipc.loop_buffer.full_cond);
pthread_cond_destroy(&thread_ipc.loop_buffer.empty_cond);
pthread_mutex_destroy(&thread_ipc.sync_buffer.buffer_mutex);
return 0;
}
int set_thread_attr(pthread_attr_t *attr, int policy, int priority, int cpuid)
{
struct sched_param param;
cpu_set_t cpu_info;
pthread_attr_init(attr);
if (pthread_attr_setschedpolicy(attr, policy) != 0) {
perror("pthread_attr_setschedpolicy");
return -1;
}
param.sched_priority = priority;
if (pthread_attr_setschedparam(attr, &param) != 0) {
perror("pthread_attr_setschedparam");
return -1;
}
CPU_ZERO(&cpu_info);
CPU_SET(cpuid, &cpu_info);
if (pthread_attr_setaffinity_np(attr,sizeof(cpu_set_t),&cpu_info)) {
perror("pthread_attr_setaffinity_np");
return -1;
}
if (pthread_attr_setinheritsched(attr, PTHREAD_EXPLICIT_SCHED) != 0) {
perror("pthread_attr_setinheritsched");
return -1;
}
return 0;
}
int find_subframe_num(unsigned long long current_subframe_num, buffer_t *buf, int *flag)
{
long long tmp;
int i;
tmp = current_subframe_num;
for ( i = 0; i < HIGHBUFFER + 1; i++)
{
if(tmp == buf[i].subframe_num)
{
return i;
} else if (tmp < buf[i].subframe_num) {
*flag = 1;
}
}
return -1;
}
int ue_unsync_thread_ipc_reset(void)
{
thread_ipc.ue_sync_state = 0;
pthread_mutex_lock(&thread_ipc.loop_buffer.buffer_mutex);
if (thread_ipc.loop_buffer.isempty) {
pthread_cond_signal(&thread_ipc.loop_buffer.empty_cond);
}
if (thread_ipc.loop_buffer.isfull) {
pthread_cond_signal(&thread_ipc.loop_buffer.full_cond);
}
thread_ipc.loop_buffer.packet_num = 0;
thread_ipc.loop_buffer.isfull = 0;
thread_ipc.loop_buffer.isempty = 1;
loop_buffer_reset(thread_ipc.loop_buffer.loop_buf);
pthread_mutex_unlock(&thread_ipc.loop_buffer.buffer_mutex);
thread_ipc.current_subframe = 0;
return 0;
}
void bind_thread2kernel(int cpu_id)
{
cpu_set_t mask;
cpu_set_t get;
int i;
int num = sysconf(_SC_NPROCESSORS_CONF);
//printf("system has %d processor(s) by super\n", num);
CPU_ZERO(&mask);
CPU_SET(cpu_id, &mask);
if (pthread_setaffinity_np(pthread_self(), sizeof(mask), &mask) < 0) {
fprintf(stderr, "set thread affinity failed\n");
}
/*CPU_ZERO(&get);
if (pthread_getaffinity_np(pthread_self(), sizeof(get), &get) < 0) {
fprintf(stderr, "get thread affinity failed\n");
}
for (i = 0; i < num; i++) {
if (CPU_ISSET(i, &get)) {
printf("thread %d is running in processor %d\n", (int)pthread_self(), i);
}
}
if (CPU_ISSET(cpu_id, &get)) {
printf("thread %d is running in processor %d by super\n", (int)pthread_self(), cpu_id);
}*/
}
void get_thread2kernel(void)
{
cpu_set_t get;
int i;
int num = sysconf(_SC_NPROCESSORS_CONF);
printf("system has %d processor(s) by super\n", num);
CPU_ZERO(&get);
if (pthread_getaffinity_np(pthread_self(), sizeof(get), &get) < 0) {
fprintf(stderr, "get thread affinity failed\n");
}
for (i = 0; i < num; i++) {
if (CPU_ISSET(i, &get)) {
printf("The thread %d is running in processor %d by super\n", (int)pthread_self(), i);
}
}
}
targets/RTAI/USER/TOOLS/thread_ipc.h deleted 100644 → 0
View file @ 337df938
#ifndef __THREAD_IPC_H__
#define __THREAD_IPC_H__
#define SUB_FRAME_LENGTH 7680
#define FRAME_LENGTH 76800
#define UE_UL_DELAY 6 /*设置上行组帧在同步时钟基础上的延时（子帧个数）*/
#define UE_UL_SEND_DELAY 6 /*上行发送子帧号在接收子帧时间戳上的延时（子帧个数）*/
#define BUFFERMAX 5 /*环形缓冲区个数*/
#define LOWBUFFER 3 /*环形缓冲区下限, 不能为0*/
#define HIGHBUFFER 4 /*环形缓冲区上限*/
typedef struct {
long long subframe_num; /*子帧编号*/
int buffer[SUB_FRAME_LENGTH * 2]; /*一子帧数据*/
}buffer_t;
typedef struct {
int packet_num; /*环形缓冲区数据包计数器，表示环形缓冲区有效数据包个数*/
int isfull; /*标记环形缓冲区有效数据包是否达到上限标志*/
int isempty; /*标记环形缓冲区有效数据包是否达到下限标志*/
pthread_mutex_t buffer_mutex; /*环形缓冲区操作保护锁*/
pthread_cond_t full_cond; /*环形缓冲区上限条件变量,配合isfull使用 */
pthread_cond_t empty_cond; /*环形缓冲区下限条件变量,配合isempty使用*/
buffer_t loop_buf[BUFFERMAX]; /*环形缓冲区*/
}loop_buffer_op_t;
typedef struct {
int decoding_subframe_num; /*待解码子帧的编号*/
pthread_mutex_t buffer_mutex; /*对sync_buffer临界区的保护锁*/
int sync_buffer[SUB_FRAME_LENGTH * 10]; /*同步线程与下行解码线程数据共享缓冲区*/
}sync_buffer_t;
typedef struct {
unsigned int rx_timestamp; /*接收数据包第一个sample时间戳*/
unsigned int tx_timestamp; /*待发送数据包的时间戳*/
unsigned long long current_subframe; /*当前子帧编号*/
int ue_sync_state; /*表示UE是否在同步状态，0表示失同步，1表示同步*/
pthread_mutex_t sync_mutex; /*根据ue_sync_state标志，唤醒组帧线程*/
pthread_mutex_t ul_send_mutex; /*用于sync线程唤醒发送线程发送数据*/
pthread_mutex_t dl_decode_mutex;/*下行解码保护锁，用于sync线程唤醒解码线程解码*/
loop_buffer_op_t loop_buffer;
sync_buffer_t sync_buffer;
}g_thread_ipc_t;
void loop_buffer_reset(buffer_t *loop_buf);
int thread_ipc_init(void);
int thread_ipc_deinit(void);
int set_thread_attr(pthread_attr_t *attr, int policy, int priority, int cpuid);
int find_subframe_num(unsigned long long current_subframe_num, buffer_t *buf, int *flag);
int ue_unsync_thread_ipc_reset(void);
extern g_thread_ipc_t thread_ipc;
#endif
targets/RTAI/USER/condtest.c deleted 100644 → 0
View file @ 337df938
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sched.h>
#include <rtai_lxrt.h>
#include <rtai_sem.h>
#include <rtai_msg.h>
#define PERIOD 100000000
#define THRESHOLD 1
static SEM *mutex;
static CND *cond;
static int thread0;
static int thread1;
static int instance_cnt=-1; //0 means worker is busy, -1 means its free
static void *fun0(void *arg)
{
RT_TASK *task;
int done1=0, cnt1=0;
RTIME right_now;
int ret;
task = rt_task_init_schmod(nam2num("TASK0"), 0, 0, 0, SCHED_FIFO, 0xF);
mlockall(MCL_CURRENT | MCL_FUTURE);
rt_make_hard_real_time();
while (cnt1 < THRESHOLD)
{
rt_sem_wait(mutex);
rt_printk("fun0: Hello World %d, instance_cnt %d!\n",cnt1,instance_cnt);
while (instance_cnt<0)
{
ret = rt_cond_wait(cond, mutex);
if (ret != 0)
{
rt_printk("error in rt_cond_wait, code %d\n",ret);
switch (ret)
{
case RTE_PERM:
rt_printk("error RTE_PERM %d\n",ret);
break;
case RTE_UNBLKD:
rt_printk("error RTE_UNBLKD %d\n",ret);
break;
case RTE_OBJREM:
rt_printk("error RTE_OBJREM %d\n",ret);
break;
default:
rt_printk("unknown error code %d\n",ret);
break;
}
break;
}
}
rt_sem_signal(mutex);
// do some work here
cnt1++;
rt_sem_wait(mutex);
instance_cnt--;
rt_sem_signal(mutex);
}
// makes task soft real time
rt_make_soft_real_time();
printf("Back to soft RT\n");
// clean task
rt_task_delete(task);
printf("Task deleted. returning\n");
return 0;
}
int main(void)
{
RT_TASK *task;
RTIME now;
int cnt=0;
// make main thread LXRT soft realtime
task = rt_task_init_schmod(nam2num("MYTASK"), 9, 0, 0, SCHED_FIFO, 0xF);
mlockall(MCL_CURRENT | MCL_FUTURE);
// start realtime timer and scheduler
//rt_set_oneshot_mode();
rt_set_periodic_mode();
start_rt_timer(0);
now = rt_get_time() + 10*PERIOD;
rt_task_make_periodic(task, now, PERIOD);
printf("Init mutex and cond.\n");
mutex = rt_sem_init(nam2num("MUTEX"), 1);
if (mutex==0)
printf("Error init mutex\n");
cond = rt_cond_init(nam2num("CONDITION"));
if (cond==0)
printf("Error init cond\n");
thread0 = rt_thread_create(fun0, NULL, 10000);
//thread1 = rt_thread_create(fun1, NULL, 20000);
//rt_sleep(PERIOD);
while (cnt < THRESHOLD)
{
rt_task_wait_period();
rt_printk("main: Hello World %d!\n",cnt);
rt_sem_wait(mutex); //now the mutex should have value 0
if (instance_cnt==0)
{
rt_sem_signal(mutex); //now the mutex should have vaule 1
rt_printk("worker thread busy!\n");
}
else
{
instance_cnt++;
rt_cond_signal(cond);
rt_sem_signal(mutex); //now the mutex should have vaule 1
rt_printk("signaling worker thread to start!\n");
}
cnt++;
}
// wait for end of program
printf("TYPE <ENTER> TO TERMINATE\n");
getchar();
// cleanup
stop_rt_timer();
return 0;
}
targets/RTAI/USER/dot11.c deleted 100644 → 0
View file @ 337df938
/*******************************************************************************
Eurecom OpenAirInterface
Copyright(c) 1999 - 2011 Eurecom
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information
Openair Admin: openair_admin@eurecom.fr
Openair Tech : openair_tech@eurecom.fr
Forums : http://forums.eurecom.fsr/openairinterface
Address : Eurecom, 2229, route des crêtes, 06560 Valbonne Sophia Antipolis, France
*******************************************************************************/
<<<<<<< .mine
/*! \file dot11.c
* \brief main program to control HW and scheduling for openairITS dot11 MODEM
* \author R. Knopp, F. Kaltenberger
* \date 2012
* \version 0.1
* \company Eurecom
* \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr
* \note
* \warning
*/
=======
/*! \file dot11.c
* \brief main program to control HW and scheduling for openairITS dot11 MODEM
* \author R. Knopp, F. Kaltenberger
* \date 2012
* \version 0.1
* \company Eurecom
* \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr
* \note
* \warning
*/
>>>>>>> .r3153
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sched.h>
#include <signal.h>
#include <execinfo.h>
#include <getopt.h>
#include <rtai_lxrt.h>
#include <rtai_sem.h>
#include <rtai_msg.h>
#include "PHY/types.h"
#include "PHY/defs.h"
#include "ARCH/COMMON/defs.h"
#include "ARCH/CBMIMO1/DEVICE_DRIVER/cbmimo1_device.h"
#include "ARCH/CBMIMO1/DEVICE_DRIVER/cbmimo1_pci.h"
#include "SIMULATION/LTE_PHY/openair_hw.h"
#include "ARCH/CBMIMO1/DEVICE_DRIVER/vars.h"
#include "SCHED/defs.h"
#include "SCHED/vars.h"
<<<<<<< .mine
#include "phy/DOT11/defs.h"
#include "phy/DOT11/commonvars.h"
#include <malloc.h>
=======
#include "phy/DOT11/defs.h"
#include "phy/DOT11/commonvars.h"
#include "PHY/TOOLS/defs.h"
>>>>>>> .r3153
<<<<<<< .mine
=======
#include <malloc.h>
>>>>>>> .r3153
<<<<<<< .mine
#include "UTIL/LOG/log.h"
=======
>>>>>>> .r3153
<<<<<<< .mine
#define FRAME_LENGTH_SAMPLES_MAX 100000
uint16_t rev64[64];
int generate_test_tx=0;
=======
#include "UTIL/LOG/log.h"
#include "ieee80211p-netlinkapi.h"
#define FRAME_LENGTH_SAMPLES_MAX 100000
uint16_t rev64[64];
int generate_test_tx=0;
>>>>>>> .r3153
#define FRAME_PERIOD 100000000ULL
#define DAQ_PERIOD 66666ULL
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
enum nl80211_band {
NL80211_BAND_2GHZ,
NL80211_BAND_5GHZ,
NL80211_BAND_5_9GHZ,
NL80211_BAND_0_8GHZ,
};
<<<<<<< .mine
=======
enum ieee80211_band {
IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
IEEE80211_BAND_5_9GHZ = NL80211_BAND_5_9GHZ,
IEEE80211_BAND_0_8GHZ = NL80211_BAND_0_8GHZ,
};
struct ieee80211p_rx_status {
short data_len; //frame data length in bytes
char rssi; //received power in dBm
char rate; //reveived data rate in units of 100 kbps
enum ieee80211_band band;
char flags; //RX flags
}; /* struct ieee80211p_rx_status */
>>>>>>> .r3153
//static CND *cond;
static int thread1;
static int thread2;
static int sync_thread;
static int instance_cnt=-1; //0 means worker is busy, -1 means its free
int instance_cnt_ptr_kern,*instance_cnt_ptr_user;
int pci_interface_ptr_kern;
extern unsigned int bigphys_top;
extern unsigned int mem_base;
int openair_fd = 0;
int oai_exit = 0;
//PCI_interface_t *pci_interface[3];
unsigned int *DAQ_MBOX;
unsigned int time_offset[4] = {0,0,0,0};
int fs4_test=0;
char UE_flag=0;
struct timing_info_t {
unsigned int frame, hw_slot, last_slot, next_slot;
RTIME time0, time1, time2;
unsigned int mbox0, mbox1, mbox2, mbox_target;
} timing_info[20];
extern s16* sync_corr_ue0;
extern s16 prach_ifft[4][1024*2];
typedef enum {normal_txrx=0,rx_calib_ue=1,rx_calib_ue_med=2,rx_calib_ue_byp=3} runmode_t;
runmode_t mode;
int rx_input_level_dBm;
int otg_enabled = 0;
TX_RX_VARS dummy_tx_rx_vars;
unsigned int bigphys_top;
unsigned int mem_base;
<<<<<<< .mine
uint32_t *txdata[2],*rxdata[2];
uint8_t *data_ind = NULL;
extern int dot11_netlink_init();
extern void *rx_thread(void *);
extern void *tx_thread(void *);
void dot11_init() {
set_taus_seed(0);
// Basic initializations
init_fft(64,6,rev64);
init_interleavers();
ccodedot11_init();
ccodedot11_init_inv();
phy_generate_viterbi_tables();
init_crc32();
}
=======
uint32_t *txdata[2],*rxdata[2];
>>>>>>> .r3153
<<<<<<< .mine
void generate_test_tx_signal() {
=======
uint8_t *data_ind = NULL;
>>>>>>> .r3153
<<<<<<< .mine
TX_VECTOR_t tx_vector;
int i;
if (data_ind == NULL) {
data_ind = (uint8_t*)malloc(4095+2+1);
data_ind[0] = 0;
data_ind[1] = 0;
}
tx_vector.rate=1;
tx_vector.sdu_length=512;
tx_vector.service=0;
for (i=0;i<tx_vector.sdu_length;i++)
data_ind[i+2] = taus(); // randomize packet
data_ind[tx_vector.sdu_length+2+4]=0; // Tail byte
printf("Generating signal at %p\n",txdata[0]);
phy_tx_start(&tx_vector,txdata[0],0,data_ind);
}
void signal_handler(int sig)
{
void *array[10];
size_t size;
=======
CHANNEL_STATUS_t dot11_state = IDLE;
extern int Ndbps[8];
>>>>>>> .r3153
extern int32_t rxDATA_F_comp_aggreg3[48*1024];
extern int32_t rxDATA_F_comp_aggreg2[48*1024];
#define FRAME_LENGTH_SAMPLES 76800
#define RX_THRES 60
#define SLOT_DURATION_5MHz 105
#define RX_THRES_dB 300
u32 rxgain[4]={30,30,30,30};
unsigned int rxg_max[4]={133,133,133,133}, rxg_med[4]={127,127,127,127}, rxg_byp[4]={120,120,120,120};
extern int tx_sdu_active;
extern int tx_sdu_length;
extern char rxsdu[2000];
int n;
static void *rx_thread(void *arg) {
int fd = *((int*)arg);
int rx_offset;
RX_VECTOR_t *rxv;
uint8_t *data_ind_rx;
int i;
struct ieee80211p_rx_status *rs;
int ret,frame;
RT_TASK *task;
int16_t rx_energy;
int initial_sample_offset = 0,off=0;
int dlen,dlen_symb;
int mbox_off = 0,old_mbox,mbox_diff;
int rt_skip_cond;
int pos_crc=0,neg_crc=0;
int sdu_received;
int sample_threshold;
int log2_maxh;
struct sched_param mysched;
int skip=0;
int txlen;
/* mysched.sched_priority = 99;
sched_setscheduler( 0, SCHED_FIFO, &mysched);
*/
char dummy_data[16];
if (fd>0) {
printf("rx_thread starting, fd %d\n",fd);
data_ind_rx = (uint8_t*)malloc(4095+2+1+12);
task = rt_task_init_schmod(nam2num("TASK0"), 0, 0, 0, SCHED_FIFO, 0xF);
mlockall(MCL_CURRENT | MCL_FUTURE);
// rt_make_hard_real_time();
// printf("Started rx_thread ... MBOX %d\n",((unsigned int *)DAQ_MBOX)[0]);
// wait until MBOX gets around to zero
i=0;
while (((volatile unsigned int *)DAQ_MBOX)[0] != 0) {
rt_sleep(nano2count(10000));
if (i>1000) {
printf("HW not counting,exiting rx_thread\n");
return(0);
}
}
// printf("Got first MBOX = 0\n");
// wait for first 120us
while (((unsigned int *)DAQ_MBOX)[0] < 2)
rt_sleep(nano2count(2*66666));
old_mbox = ((unsigned int *)DAQ_MBOX)[0];
// printf("MBOX = %d\n",((unsigned int *)DAQ_MBOX)[0]);
i = 0;
frame = 0;
// oai_exit=1;
rt_skip_cond=0;
while (!oai_exit) {
// printf("While in ... mbox %d\n",((unsigned int *)DAQ_MBOX)[0]);
rx_energy = dB_fixed_times10(signal_energy((int32_t*)(rxdata[0]+(initial_sample_offset&(~0x1))),
SLOT_DURATION_5MHz - (SLOT_DURATION_5MHz&1)));
sdu_received = 0;
if (rx_energy>RX_THRES_dB) {
if (initial_sample_offset < SLOT_DURATION_5MHz)
off = initial_sample_offset + FRAME_LENGTH_SAMPLES - SLOT_DURATION_5MHz;
else
off = initial_sample_offset - SLOT_DURATION_5MHz;
if (((dot11_state = initial_sync(&rxv,
&rx_offset,
&log2_maxh,
rxdata[0],
FRAME_LENGTH_SAMPLES,
off,
1)) == BUSY)) {
//if ((frame % 100) == 0)
// printf("Channel is busy, rxv %p, offset %d\n",(void*)rxv,rx_offset);
if (rxv) {
rx_energy = dB_fixed_times10(signal_energy((int32_t*)(rxdata[0]+rx_offset),
80));
// if ((frame%100) == 0)
printf("Frame %d: Rate %d, SDU_LENGTH %d,rx_offset %d,log2_maxh %d, rxp %f dBm (dig %f,rxgain %d)\n",
frame,rxv->rate,rxv->sdu_length,rx_offset,log2_maxh,(rx_energy/10.0)-rxg_max[0]+30-rxgain[0],
rx_energy/10.0,rxg_max[0]-30+rxgain[0]);
if ((rxv->sdu_length > 1500) || (rxv->rate > 3) )
printf("ERROR: Frame %d: Rate %d, SDU_LENGTH %d,rx_offset %d,log2_maxh %d, rxp %f dBm (dig %f,rxgain %d)\n",
frame,rxv->rate,rxv->sdu_length,rx_offset,log2_maxh,(rx_energy/10.0)-rxg_max[0]+30-rxgain[0],
rx_energy/10.0,rxg_max[0]-30+rxgain[0]);
else {
memset((void*)&data_ind_rx[10],0,rxv->sdu_length+4+2+1+16);
<<<<<<< .mine
=======
if (data_detection(rxv,&data_ind_rx[10],
(uint32_t*)rxdata[0],
76800,rx_offset,log2_maxh,NULL)) {
pos_crc++;
printf("Received SDU with positive CRC\n");
if (fd) {
rs = (struct ieee80211p_rx_status *)&data_ind_rx[0];
rs->data_len = rxv->sdu_length;
rs->rssi = (char)((rx_energy/10.0)-rxg_max[0]+30-rxgain[0]);
rs->rate = 60;
rs->band = IEEE80211_BAND_0_8GHZ;
rs->flags = 0;
ret = netlink_send(fd,NLCMD_DATA,128,&data_ind_rx[0]);
}
}
else {
neg_crc++;
printf("Received SDU with negative CRC\n");
oai_exit=1;
write_output("rxDATA_F_comp_aggreg3.m","rxDAT_F_comp_aggreg3", rxDATA_F_comp_aggreg3,48*200,1,1);
write_output("rxsig_sdu.m","rxsig_sdu",&rxdata[0][rx_offset],80*40,1,1);
// write_output("rxDATA_F_comp_aggreg2.m","rxDAT_F_comp_aggreg2", rxDATA_F_comp_aggreg2,48*200,1,1);
}
sdu_received = 1;
// oai_exit = 1;
dlen = 32+16+6+(rxv->sdu_length<<3); // data length is 32-bits CRC + sdu + 16 service + 6 tail
dlen_symb = dlen/Ndbps[rxv->rate];
if ((dlen%Ndbps[rxv->rate])>0)
dlen_symb++;
// printf("after dd: initial_sample_offset %d =>",initial_sample_offset);
initial_sample_offset = rx_offset + (80*dlen_symb);
// printf("%d\n",initial_sample_offset);
}
}
else {
printf("BUSY, no synch (off %d) Frame %d (%llu us): rxp %f dBm (dig %f,rxgain %d)\n",
off,frame,rt_get_time_ns()/1000,(rx_energy/10.0)-rxg_max[0]+30-rxgain[0],
rx_energy/10.0,rxg_max[0]-30+rxgain[0]);
}
}
else {
/* printf("Frame %d (%llu us): rxp %d dBm (dig %d,rxgain %d)\n",
frame,rt_get_time_ns()/1000,rx_energy-rxg_max[0]+30-rxgain[0],
rx_energy,rxg_max[0]-30+rxgain[0]);
*/
}
}
else {
if (((frame%100) == 0) && (initial_sample_offset < 2*SLOT_DURATION_5MHz)) {
printf("Frame %d (%llu us): rxp %f dBm (dig %f,rxgain %d)\n",
frame,rt_get_time_ns()/1000,(rx_energy/10.0)-rxg_max[0]+30-rxgain[0],
rx_energy/10.0,rxg_max[0]-30+rxgain[0]);
}
if ((frame > 100) &&
(tx_sdu_active == 1) &&
(initial_sample_offset < 60000)) {
printf("Frame %d: Generating SDU of length %d (%p), initial_sample_offset %d, MBOX <<9 %d\n",frame,tx_sdu_length,rxsdu,initial_sample_offset,DAQ_MBOX[0]<<9); /*
for (n=0;n<tx_sdu_length;n++)
printf("%2hhx.",rxsdu[n]);
printf("\n");
*/
initial_sample_offset += (8*512);
if (initial_sample_offset > FRAME_LENGTH_SAMPLES)
initial_sample_offset -= FRAME_LENGTH_SAMPLES;
txlen= generate_tx_signal(initial_sample_offset);
// wait until TX is finished
printf("TX: txlen %d, initial_sample_offset %d\n",txlen,initial_sample_offset);
//oai_exit=1;
rt_sleep(nano2count((66666*8)+((txlen*66666)>>9)));
skip = initial_sample_offset+txlen-FRAME_LENGTH_SAMPLES;
if (skip < 0)
skip = 0;
printf("TX: erasing signal, MBOX %d (%d)\n",DAQ_MBOX[0],DAQ_MBOX[0]<<9);
// erase TX signal
for (i=0;i<(txlen-skip);i++)
txdata[0][initial_sample_offset+i] = 0x00010001;
for (i=0;i<skip;i++)
txdata[0][i] = 0x00010001;
initial_sample_offset += txlen;
if (initial_sample_offset > FRAME_LENGTH_SAMPLES) {
initial_sample_offset -= FRAME_LENGTH_SAMPLES;
frame++;
mbox_off = 0;
}
tx_sdu_active = 0;
old_mbox = DAQ_MBOX[0];
}
//rt_sleep(nano2count(10000));
// printf("back from sleep 10000 ... mbox %d\n",((unsigned int *)DAQ_MBOX)[0]);
}
initial_sample_offset+=SLOT_DURATION_5MHz;
if (initial_sample_offset>FRAME_LENGTH_SAMPLES) {
initial_sample_offset-=FRAME_LENGTH_SAMPLES;
mbox_off = 0;
frame++;
// if ((frame%100) == 0)
//printf("**** New frame %d\n",frame);
if (frame == 100000)
oai_exit = 1;
}
// sleep until HW has filled enough samples
mbox_diff = ((unsigned int*)DAQ_MBOX)[0]-old_mbox;
// if ((frame%100) == 0)
// printf("frame %d, old_mbox %d, mbox %d (initial_sample_offset %d : mbox<<9 %d)\n",frame,old_mbox,((unsigned int*)DAQ_MBOX)[0],initial_sample_offset,((unsigned int*)DAQ_MBOX)[0]<<9);
if ((mbox_diff>10) && (sdu_received == 0)) {
mbox_off = 0;
initial_sample_offset = ((unsigned int*)DAQ_MBOX)[0]<<9;
// printf("initial_sample_offset adjusted %d\n",initial_sample_offset);
rt_skip_cond++;
// printf("old_mbox %d, mbox %d (initial_sample_offset %d : mbox<<9 %d)\n",
// old_mbox,((unsigned int*)DAQ_MBOX)[0],initial_sample_offset,((unsigned int*)DAQ_MBOX)[0]<<9);
old_mbox = ((unsigned int *)DAQ_MBOX)[0];
}
else {
if (old_mbox > ((unsigned int *)DAQ_MBOX)[0])
mbox_off = 150;
old_mbox = ((unsigned int *)DAQ_MBOX)[0];
}
/*
printf("off: %d (%d,%d), mbox_off %d => rx_energy %d\n",initial_sample_offset,
((unsigned int *)DAQ_MBOX)[0],
(initial_sample_offset>>9),mbox_off,
rx_energy);
*/
sample_threshold = initial_sample_offset+1024;
if (sample_threshold > FRAME_LENGTH_SAMPLES)
sample_threshold -= FRAME_LENGTH_SAMPLES;
while (old_mbox+mbox_off <= (sample_threshold>>9)) {
// if ((frame % 100) == 0)
// printf("sleeping (mbox %d, mbox_off %d, initial_sample_offset>>9 %d\n",
// old_mbox,mbox_off,(initial_sample_offset>>9));
rt_sleep(nano2count(66666));
if (old_mbox > ((unsigned int *)DAQ_MBOX)[0])
mbox_off = 150;
old_mbox = ((unsigned int *)DAQ_MBOX)[0];
}
// printf("While out ... mbox %d\n",((unsigned int *)DAQ_MBOX)[0]);
}
printf("rt_skip_cond %d, frames %d, pos_crc %d, neg_crc %d\n",
rt_skip_cond,frame,pos_crc,neg_crc);
printf("Dumping IS stats\n");
print_is_stats();
print_dd_stats();
write_output("rxsig0.m","rxs", rxdata[0],76800,1,1);
write_output("txsig0.m","txs", txdata[0],76800,1,1);
write_output("rxDATA_F_comp_aggreg3.m","rxDAT_F_comp_aggreg3", rxDATA_F_comp_aggreg3,48*200,1,1);
write_output("rxDATA_F_comp_aggreg2.m","rxDAT_F_comp_aggreg2", rxDATA_F_comp_aggreg2,48*200,1,1);
printf("[DOT11][PHY] Leaving rx_thread\n");
free(data_ind_rx);
}
else {
printf("[DOT11][PHY] No netlink, exiting\n");
}
return(0);
}
//extern int dot11_netlink_init();
//extern int dot11_rx_thread_init();
//extern void *rx_thread(void *);
extern void *tx_thread(void *);
void dot11_init() {
set_taus_seed(0);
// Basic initializations
init_fft(64,6,rev64);
init_interleavers();
ccodedot11_init();
ccodedot11_init_inv();
phy_generate_viterbi_tables();
init_crc32();
}
int generate_tx_signal(int tx_offset) {
TX_VECTOR_t tx_vector;
int i;
printf("Generating Signal @ %d (MBOX << 9 = %d)\n",
tx_offset,DAQ_MBOX[0]<<9);
if (data_ind == NULL) {
data_ind = (uint8_t*)malloc(4095+2+1);
data_ind[0] = 0;
data_ind[1] = 0;
}
tx_vector.rate=1;
tx_vector.sdu_length=tx_sdu_length;
tx_vector.service=0;
for (i=0;i<tx_vector.sdu_length;i++)
data_ind[i+2] = rxsdu[i];
data_ind[tx_vector.sdu_length+2+4]=0; // Tail byte
>>>>>>> .r3153
// printf("Generating signal at %p\n",txdata[0]);
return(phy_tx_start(&tx_vector,txdata[0],tx_offset,FRAME_LENGTH_SAMPLES,data_ind));
}
void signal_handler(int sig)
{
void *array[10];
size_t size;
oai_exit=1;
// get void*'s for all entries on the stack
size = backtrace(array, 10);
// print out all the frames to stderr
fprintf(stderr, "Error: signal %d:\n", sig);
backtrace_symbols_fd(array, size, 2);
exit(-1);
}
void exit_fun(const char* s)
{
void *array[10];
size_t size;
int fd;
printf("Exiting: %s\n",s);
oai_exit=1;
rt_sleep(nano2count(FRAME_PERIOD));
// cleanup
stop_rt_timer();
fd = 0;
ioctl(openair_fd,openair_STOP,&fd);
munmap((void*)mem_base, BIGPHYS_NUMPAGES*4096);
exit (-1);
}
int dummy_tx_buffer[3840*4] __attribute__((aligned(16)));
/* This is the main dot11 thread. */
static void *dot11_thread(void *arg)
{
RT_TASK *task;
int slot=0,hw_slot,last_slot, next_slot,frame=0;
unsigned int msg1;
unsigned int aa,slot_offset, slot_offset_F;
int diff;
int delay_cnt;
RTIME time_in;
int mbox_target=0,mbox_current=0;
int i;
task = rt_task_init_schmod(nam2num("TASK0"), 0, 0, 0, SCHED_FIFO, 0xF);
mlockall(MCL_CURRENT | MCL_FUTURE);
#ifdef HARD_RT
<<<<<<< .mine
rt_printk("Started dot11 thread (id %p)\n",task);
rt_make_hard_real_time();
#else
printf("Started dot11 thread (id %p)\n",task);
#endif
=======
rt_printk("Started dot11 thread (id %p)\n",task);
>>>>>>> .r3153
<<<<<<< .mine
while (!oai_exit) {
// rt_printk("eNB: slot %d\n",slot);
=======
>>>>>>> .r3153
<<<<<<< .mine
=======
rt_make_hard_real_time();
#else
>>>>>>> .r3153
printf("Started dot11 thread (id %p)\n",task);
<<<<<<< .mine
if (frame>5)
{
if ((frame%100)==0)
#ifdef HARD_RT
rt_printk("slot %d, hw_slot %d, next_slot %d (before): DAQ_MBOX %d\n", slot, hw_slot,next_slot,DAQ_MBOX[0]);
#else
printf("frame %d slot %d, hw_slot %d, next_slot %d (before): DAQ_MBOX %d\n", frame,slot, hw_slot,next_slot,DAQ_MBOX[0]);
#endif
if (fs4_test==0) {
if ((next_slot == 0) && (generate_test_tx==1) && ((frame%100)==0)) {
printf("Generating tx_signal in frame %d ...",frame);
generate_test_tx_signal();
printf("done\n");
}
else { // Check for normal TX packet
/*for (i=0;i<3840;i++) {
((uint32_t *)txdata[0] + (3840*next_slot))[i] = 0x00010001;
}*/
}
}
}
=======
while (!oai_exit) {
// rt_printk("eNB: slot %d\n",slot);
hw_slot = (((((unsigned int *)DAQ_MBOX)[0]+1)%150)<<1)/15;
//this is the mbox counter where we should be
mbox_target = ((((slot+1)%20)*15+1)>>1)%150;
//this is the mbox counter where we are
mbox_current = ((unsigned int *)DAQ_MBOX)[0];
//this is the time we need to sleep in order to synchronize with the hw (in multiples of DAQ_PERIOD)
if ((mbox_current>=135) && (mbox_target<15)) //handle the frame wrap-arround
diff = 150-mbox_current+mbox_target;
else if ((mbox_current<15) && (mbox_target>=135))
diff = -150+mbox_target-mbox_current;
else
diff = mbox_target - mbox_current;
if (diff < (-5)) {
printf("[dot11_thread] Frame %d: missed slot, proceeding with next one (slot %d, hw_slot %d, diff %d)\n",frame, slot, hw_slot, diff);
>>>>>>> .r3153
slot++;
if (slot==20)
<<<<<<< .mine
slot=0;
//slot++;
if ((slot%20)==0)
frame++;
=======
slot=0;
continue;
>>>>>>> .r3153
}
if (diff>8)
printf("[dot11_thread] eNB Frame %d: skipped slot, waiting for hw to catch up (slot %d, hw_slot %d, mbox_current %d, mbox_target %d, diff %d)\n",frame, slot, hw_slot, mbox_current, mbox_target, diff);
delay_cnt = 0;
while ((diff>0) && (!oai_exit))
{
time_in = rt_get_time_ns();
//rt_printk("eNB Frame %d delaycnt %d : hw_slot %d (%d), slot %d, (slot+1)*15=%d, diff %d, time %llu\n",frame,delay_cnt,hw_slot,((unsigned int *)DAQ_MBOX)[0],slot,(((slot+1)*15)>>1),diff,time_in);
//rt_printk("Frame %d: slot %d, sleeping for %llu\n", frame, slot, diff*DAQ_PERIOD);
rt_sleep(nano2count(diff*DAQ_PERIOD));
hw_slot = (((((unsigned int *)DAQ_MBOX)[0]+1)%150)<<1)/15;
//rt_printk("eNB Frame %d : hw_slot %d, time %llu\n",frame,hw_slot,rt_get_time_ns());
delay_cnt++;
if (delay_cnt == 10)
{
oai_exit = 1;
printf("[dot11_thread]eNB Frame %d: HW stopped ... \n",frame);
}
mbox_current = ((unsigned int *)DAQ_MBOX)[0];
if ((mbox_current>=135) && (mbox_target<15)) //handle the frame wrap-arround
diff = 150-mbox_current+mbox_target;
else
diff = mbox_target - mbox_current;
}
last_slot = (slot)%LTE_SLOTS_PER_FRAME;
if (last_slot <0)
last_slot+=20;
next_slot = (slot+3)%LTE_SLOTS_PER_FRAME;
<<<<<<< .mine
=======
if (frame>5)
{
if ((frame%100)==0)
#ifdef HARD_RT
rt_printk("slot %d, hw_slot %d, next_slot %d (before): DAQ_MBOX %d\n", slot, hw_slot,next_slot,DAQ_MBOX[0]);
#else
printf("frame %d slot %d, hw_slot %d, next_slot %d (before): DAQ_MBOX %d\n", frame,slot, hw_slot,next_slot,DAQ_MBOX[0]);
#endif
if (fs4_test==0) {
if ((next_slot == 0) && (generate_test_tx==1) && ((frame%100)==0)) {
printf("Generating tx_signal in frame %d ...",frame);
//generate_test_tx_signal();
printf("done\n");
}
else { // Check for normal TX packet
/*for (i=0;i<3840;i++) {
((uint32_t *)txdata[0] + (3840*next_slot))[i] = 0x00010001;
}*/
}
}
}
slot++;
if (slot==20)
slot=0;
//slot++;
if ((slot%20)==0)
frame++;
}
rt_printk("fun0: finished, ran %d times.\n",slot);
#ifdef HARD_RT
rt_make_soft_real_time();
#endif
// clean task
rt_task_delete(task);
rt_printk("Task deleted. returning\n");
return 0;
}
>>>>>>> .r3153
int main(int argc, char **argv) {
RT_TASK *task;
int i,j,aa;
LTE_DL_FRAME_PARMS *frame_parms;
u32 carrier_freq[4]= {1907600000,1907600000,1907600000,1907600000};
u32 rf_mode_max[4] = {55231,55231,55231,55231};
u32 rf_mode_med[4] = {39375,39375,39375,39375};
u32 rf_mode_byp[4] = {22991,22991,22991,22991};
u32 rf_local[4] = {8255000,8255000,8255000,8255000}; // UE zepto
//{8254617, 8254617, 8254617, 8254617}; //eNB khalifa
//{8255067,8254810,8257340,8257340}; // eNB PETRONAS
u32 rf_vcocal[4] = {2340,2340,2340,2340};
u32 rf_rxdc[4] = {32896,32896,32896,32896};
<<<<<<< .mine
u32 rxgain[4]={20,20,20,20};
=======
>>>>>>> .r3153
<<<<<<< .mine
=======
>>>>>>> .r3153
u8 eNB_id=0,UE_id=0;
u16 Nid_cell = 0;
u8 cooperation_flag=0, transmission_mode=1, abstraction_flag=0;
u8 beta_ACK=0,beta_RI=0,beta_CQI=2;
int c;
char do_forms=0;
unsigned int fd,dot11_netlink_fd;
unsigned int tcxo = 114;
int amp;
char rxg_fname[100];
char rflo_fname[100];
FILE *rxg_fd=NULL;
FILE *rflo_fd=NULL;
<<<<<<< .mine
=======
>>>>>>> .r3153
const struct option long_options[] = {
{"calib-rx", required_argument, NULL, 256},
{"calib-rx-med", required_argument, NULL, 257},
{"calib-rx-byp", required_argument, NULL, 258},
{NULL, 0, NULL, 0}};
mode = normal_txrx;
while ((c = getopt_long (argc, argv, "C:ST:dF:t",long_options,NULL)) != -1)
{
switch (c)
{
case 'd':
do_forms=1;
break;
case 't':
generate_test_tx = 1;
break;
case 'C':
carrier_freq[0] = atoi(optarg);
carrier_freq[1] = atoi(optarg);
carrier_freq[2] = atoi(optarg);
carrier_freq[3] = atoi(optarg);
break;
case 'S':
fs4_test=1;
break;
case 'T':
tcxo=atoi(optarg);
break;
case 'F':
sprintf(rxg_fname,"%srxg.lime",optarg);
rxg_fd = fopen(rxg_fname,"r");
if (rxg_fd) {
printf("Loading RX Gain parameters from %s\n",rxg_fname);
fscanf(rxg_fd,"%d %d %d %d",&rxg_max[0],&rxg_max[1],&rxg_max[2],&rxg_max[3]);
fscanf(rxg_fd,"%d %d %d %d",&rxg_med[0],&rxg_med[1],&rxg_med[2],&rxg_med[3]);
fscanf(rxg_fd,"%d %d %d %d",&rxg_byp[0],&rxg_byp[1],&rxg_byp[2],&rxg_byp[3]);
}
else
printf("%s not found, running with defaults\n",rxg_fname);
sprintf(rflo_fname,"%srflo.lime",optarg);
rflo_fd = fopen(rflo_fname,"r");
if (rflo_fd) {
printf("Loading RF LO parameters from %s\n",rflo_fname);
fscanf(rflo_fd,"%d %d %d %d",&rf_local[0],&rf_local[1],&rf_local[2],&rf_local[3]);
}
else
printf("%s not found, running with defaults\n",rflo_fname);
break;
case 256:
mode = rx_calib_ue;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA max), input level %d dBm\n",rx_input_level_dBm);
break;
case 257:
mode = rx_calib_ue_med;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA med), input level %d dBm\n",rx_input_level_dBm);
break;
case 258:
mode = rx_calib_ue_byp;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA byp), input level %d dBm\n",rx_input_level_dBm);
break;
default:
break;
}
}
// to make a graceful exit when ctrl-c is pressed
signal(SIGSEGV, signal_handler);
// init the parameters
frame_parms = (LTE_DL_FRAME_PARMS*) malloc(sizeof(LTE_DL_FRAME_PARMS));
frame_parms->N_RB_DL = 25;
frame_parms->N_RB_UL = 25;
frame_parms->Ncp = 0;
frame_parms->Ncp_UL = 0;
frame_parms->Nid_cell = Nid_cell;
frame_parms->nushift = 0;
frame_parms->nb_antennas_tx = 1;
frame_parms->nb_antennas_rx = 1;
frame_parms->mode1_flag = 1; //default == SISO
frame_parms->frame_type = 1;
if (fs4_test==1)
frame_parms->tdd_config = 255;
else
frame_parms->tdd_config = 3;
frame_parms->tdd_config_S = 0;
frame_parms->phich_config_common.phich_resource = oneSixth;
frame_parms->phich_config_common.phich_duration = normal;
frame_parms->pusch_config_common.ul_ReferenceSignalsPUSCH.cyclicShift = 0;//n_DMRS1 set to 0
frame_parms->node_id = NODE;
// for Express MIMO
for (i=0;i<4;i++)
{
frame_parms->carrier_freq[i] = carrier_freq[i];
frame_parms->carrier_freqtx[i] = carrier_freq[i];
<<<<<<< .mine
frame_parms->rxgain[i] = rxgain[i];
=======
frame_parms->rxgain[i] = rxgain[i];
frame_parms->rflocal[i] = rf_local[i];
frame_parms->rfvcolocal[i] = rf_vcocal[i];
frame_parms->rxdc[i] = rf_rxdc[i];
frame_parms->rfmode[i] = rf_mode_max[i];
>>>>>>> .r3153
}
printf("Freq %d,%d,%d,%d, Gain %d,%d,%d,%d, RFmode %d, RXDC %d, RF_local %d, rf_vcocal %d\n",
frame_parms->carrier_freq[0],frame_parms->carrier_freq[1],frame_parms->carrier_freq[2],frame_parms->carrier_freq[3],
frame_parms->rxgain[0],frame_parms->rxgain[1],frame_parms->rxgain[2],frame_parms->rxgain[3],
frame_parms->rfmode[0],frame_parms->rflocal[0],
frame_parms->rxdc[0],frame_parms->rfvcolocal[0]);
frame_parms->nb_prefix_samples0 = 40;
frame_parms->nb_prefix_samples = 36;
frame_parms->symbols_per_tti = 14;
frame_parms->ofdm_symbol_size = 512;
frame_parms->log2_symbol_size = 9;
frame_parms->samples_per_tti = 7680;
frame_parms->first_carrier_offset = frame_parms->ofdm_symbol_size - 150;
openair_fd = setup_oai_hw(frame_parms);
printf("Setting up buffers for Antenna port 0\n");
setup_dot11_buffers(&(rxdata[0]),&(txdata[0]),0);
printf("Setting up buffers for Antenna port 1\n");
setup_dot11_buffers(&(rxdata[1]),&(txdata[1]),1);
<<<<<<< .mine
printf("Initializing dot11 DSP functions\n");
dot11_init();
dot11_netlink_fd = dot11_netlink_init();
=======
>>>>>>> .r3153
<<<<<<< .mine
for (j=0; j<76800; j+=4)
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++)
{
amp = 0x8000;
// ((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+1] = 0;
//((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+3] = amp-1;
//((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+5] = 0;
//((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+7] = amp;
//((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j] = amp-1;
//((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+2] = 0;
//((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+4] = amp;
//((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+6] = 0;
}
sleep(1);
printf("Calling openair_GET_PCI_INTERFACE %x\n",openair_GET_PCI_INTERFACE);
ioctl(openair_fd,openair_GET_PCI_INTERFACE,&pci_interface_ptr_kern);
if (pci_interface_ptr_kern == 0) {
printf("null pci_interface_ptr, exiting\n");
exit(-1);
}
=======
for (j=0; j<76800; j+=4)
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++)
{
amp = 0x8000;
// ((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+1] = 0;
//((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+3] = amp-1;
//((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+5] = 0;
//((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+7] = amp;
//((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j] = amp-1;
//((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+2] = 0;
//((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+4] = amp;
//((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+6] = 0;
}
sleep(1);
printf("Calling openair_GET_PCI_INTERFACE %x\n",openair_GET_PCI_INTERFACE);
ioctl(openair_fd,openair_GET_PCI_INTERFACE,&pci_interface_ptr_kern);
if (pci_interface_ptr_kern == 0) {
printf("null pci_interface_ptr, exiting\n");
exit(-1);
}
exmimo_pci_interface = (exmimo_pci_interface_t*) (pci_interface_ptr_kern-bigphys_top+mem_base);
printf("pci_interface_ptr_kern = %p, exmimo_pci_interface = %p\n", (void*) pci_interface_ptr_kern, exmimo_pci_interface);
DAQ_MBOX = (unsigned int *)(0xc0000000+exmimo_pci_interface->rf.mbox-bigphys_top+mem_base);
printf("Initializing dot11 DSP functions\n");
dot11_init();
dot11_netlink_fd = netlink_init();
>>>>>>> .r3153
exmimo_pci_interface = (exmimo_pci_interface_t*) (pci_interface_ptr_kern-bigphys_top+mem_base);
printf("pci_interface_ptr_kern = %p, exmimo_pci_interface = %p\n", (void*) pci_interface_ptr_kern, exmimo_pci_interface);
DAQ_MBOX = (unsigned int *)(0xc0000000+exmimo_pci_interface->rf.mbox-bigphys_top+mem_base);
<<<<<<< .mine
=======
printf("dot11_netlink_fd %d\n",dot11_netlink_fd);
>>>>>>> .r3153
// make main thread LXRT soft realtime
printf("Starting LXRT ...");
task = rt_task_init_schmod(nam2num("MYTASK"), 9, 0, 0, SCHED_FIFO, 0xF);
mlockall(MCL_CURRENT | MCL_FUTURE);
// start realtime timer and scheduler
//rt_set_oneshot_mode();
rt_set_periodic_mode();
start_rt_timer(0);
<<<<<<< .mine
printf(" done\n");
=======
printf(" done\n");
>>>>>>> .r3153
<<<<<<< .mine
//now = rt_get_time() + 10*PERIOD;
//rt_task_make_periodic(task, now, PERIOD);
// initialize the instance cnt before starting the thread
// instance_cnt_ptr_user = &instance_cnt;
// signal the driver to set up for user-space operation
// this will initialize the semaphore and the task pointers in the kernel
// further we receive back the pointer to the shared instance counter which is used to signal if the thread is busy or not. This pointer needs to be mapped to user space.
/*
ioctl(openair_fd,openair_START_LXRT,&instance_cnt_ptr_kern);
instance_cnt_ptr_user = (int*) (instance_cnt_ptr_kern -bigphys_top+mem_base);
*instance_cnt_ptr_user = -1;
printf("instance_cnt_ptr_kern %p, instance_cnt_ptr_user %p, *instance_cnt_ptr_user %d\n", (void*) instance_cnt_ptr_kern, (void*) instance_cnt_ptr_user,*instance_cnt_ptr_user);
*/
=======
>>>>>>> .r3153
<<<<<<< .mine
rt_sleep(nano2count(FRAME_PERIOD));
=======
>>>>>>> .r3153
// this starts the DMA transfers
<<<<<<< .mine
=======
ioctl(openair_fd,openair_START_TX_SIG,NULL);
//ioctl(openair_fd,openair_GET_BUFFER,NULL);
>>>>>>> .r3153
<<<<<<< .mine
ioctl(openair_fd,openair_START_TX_SIG,NULL);
=======
>>>>>>> .r3153
rt_sleep(nano2count(10*FRAME_PERIOD));
<<<<<<< .mine
thread1 = rt_thread_create(dot11_thread, NULL, 100000000);
=======
//thread1 = rt_thread_create(dot11_thread, NULL, 100000000);
>>>>>>> .r3153
<<<<<<< .mine
printf("thread created\n");
=======
thread1 = rt_thread_create(rx_thread, &dot11_netlink_fd, 10000000);
>>>>>>> .r3153
thread2 = rt_thread_create(tx_thread, &dot11_netlink_fd, 10000000);
// wait for end of program
printf("TYPE <ENTER> TO TERMINATE main thread\n");
getchar();
// stop threads
rt_sleep(nano2count(FRAME_PERIOD));
stop_rt_timer();
fd = 0;
ioctl(openair_fd,openair_STOP,&fd);
munmap((void*)mem_base, BIGPHYS_NUMPAGES*4096);
return 0;
}
targets/RTAI/USER/emos-raw.c deleted 100644 → 0
View file @ 337df938
/*******************************************************************************
Eurecom OpenAirInterface
Copyright(c) 1999 - 2011 Eurecom
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information
Openair Admin: openair_admin@eurecom.fr
Openair Tech : openair_tech@eurecom.fr
Forums : http://forums.eurecom.fsr/openairinterface
Address : Eurecom, 2229, route des crêtes, 06560 Valbonne Sophia Antipolis, France
*******************************************************************************/
/*! \file lte-softmodem.c
* \brief main program to control HW and scheduling
* \author R. Knopp, F. Kaltenberger
* \date 2012
* \version 0.1
* \company Eurecom
* \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr
* \note
* \warning
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sched.h>
#include <signal.h>
#include <execinfo.h>
#include <getopt.h>
#include "rt_wrapper.h"
#include "PHY/types.h"
#include "PHY/TOOLS/defs.h"
#include "openair0_lib.h"
#include "UTIL/LOG/log.h"
#include "UTIL/LOG/vcd_signal_dumper.h"
#include "gain_control.h"
#if defined(ENABLE_ITTI)
# include "intertask_interface_init.h"
# include "timer.h"
# if defined(ENABLE_USE_MME)
# include "s1ap_eNB.h"
# include "sctp_eNB_task.h"
# endif
#endif
#define OPENAIR_THREAD_PRIORITY 255
#define OPENAIR_THREAD_STACK_SIZE 8192
#ifdef XFORMS
/*
#include "PHY/TOOLS/lte_phy_scope.h"
#include "stats.h"
// current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
// at eNB 0, an UL scope for every UE
FD_lte_phy_scope_ue *form_ue[NUMBER_OF_UE_MAX];
FD_lte_phy_scope_enb *form_enb[NUMBER_OF_UE_MAX];
FD_stats_form *form_stats=NULL;
char title[255];
unsigned char scope_enb_num_ue = 1;
*/
#include "lte_scope.h"
FD_lte_scope *form_lte;
char title[255];
#endif //XFORMS
#ifdef EMOS
#include <gps.h>
#ifdef RTAI
#include <rtai_fifos.h>
#endif
//#define CHANSOUNDER_FIFO_SIZE 10485760 // 10 Mbytes FIFO
#define CHANSOUNDER_FIFO_SIZE 20971520 // 20 Mbytes FIFO
//#define CHANSOUNDER_FIFO_SIZE 52428800 // 50 Mbytes FIFO
//#define CHANSOUNDER_FIFO_SIZE 104857600 // 100 Mbytes FIFO
#define CHANSOUNDER_FIFO_MINOR 4 // minor of the FIFO device - this is /dev/rtf3
#define CHANSOUNDER_FIFO_DEV "/dev/rtf4"
#endif
#define FRAME_PERIOD 100000000ULL
#define DAQ_PERIOD 66667ULL
#define LTE_SLOTS_PER_FRAME 20
//#define RESAMPLING_FACTOR 0
#define SAMPLES_PER_SLOT 15360
#define FRAME_LENGTH_COMPLEX_SAMPLES (SAMPLES_PER_SLOT*LTE_SLOTS_PER_FRAME)
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
#ifdef RTAI
static SEM *mutex;
//static CND *cond;
static long int thread0;
static long int thread1;
//static long int sync_thread;
#else
pthread_t thread0;
//pthread_t thread1;
pthread_attr_t attr_dlsch_threads;
struct sched_param sched_param_dlsch;
#endif
pthread_t thread2; //xforms
pthread_t thread3; //emos
pthread_t thread4; //GPS
/*
static int instance_cnt=-1; //0 means worker is busy, -1 means its free
int instance_cnt_ptr_kern,*instance_cnt_ptr_user;
int pci_interface_ptr_kern;
*/
//extern unsigned int bigphys_top;
//extern unsigned int mem_base;
int number_of_cards = 1;
exmimo_config_t *p_exmimo_config;
exmimo_id_t *p_exmimo_id;
volatile unsigned int *DAQ_MBOX;
int oai_exit = 0;
//int time_offset[4] = {-138,-138,-138,-138};
//int time_offset[4] = {-145,-145,-145,-145};
int time_offset[4] = {0,0,0,0};
int fs4_test=0;
char UE_flag=0;
u8 eNB_id=0,UE_id=0;
u32 carrier_freq[MAX_CARDS][4] = {{2590000000,0,0,0},{2605000000,2605000000,0,0},{0,0,0,0},{0,0,0,0}};
//u32 carrier_freq[MAX_CARDS][4] = {{2590000000,0,0,0},{0,0,0,0},{0,0,0,0},{0,0,0,0}};
exmimo_bw_t bandwidth[MAX_CARDS] = {BW20,BW10,BW5,BW5};
char *conf_config_file_name = NULL;
unsigned int lost_bytes=0;
int rssi_lin,rssi_lin_avg;
u8 rssi_avg_dB;
struct timing_info_t {
//unsigned int frame, hw_slot, last_slot, next_slot;
RTIME time_min, time_max, time_avg, time_last, time_now;
//unsigned int mbox0, mbox1, mbox2, mbox_target;
unsigned int n_samples;
} timing_info;
extern s16* sync_corr_ue0;
extern s16 prach_ifft[4][1024*2];
unsigned int frame;
int rx_input_level_dBm;
#ifdef XFORMS
extern int otg_enabled;
#else
int otg_enabled;
#endif
int mbox_bounds[20] = {8,16,24,30,38,46,54,60,68,76,84,90,98,106,114,120,128,136,144, 0}; ///boundaries of slots in terms ob mbox counter rounded up to even numbers
//int mbox_bounds[20] = {6,14,22,28,36,44,52,58,66,74,82,88,96,104,112,118,126,134,142, 148}; ///boundaries of slots in terms ob mbox counter rounded up to even numbers
int init_dlsch_threads(void);
void cleanup_dlsch_threads(void);
s32 init_rx_pdsch_thread(void);
void cleanup_rx_pdsch_thread(void);
int init_ulsch_threads(void);
void cleanup_ulsch_threads(void);
//void setup_ue_buffers(PHY_VARS_UE *phy_vars_ue, LTE_DL_FRAME_PARMS *frame_parms, int carrier);
//void setup_eNB_buffers(PHY_VARS_eNB *phy_vars_eNB, LTE_DL_FRAME_PARMS *frame_parms, int carrier);
void test_config(int card, int ant, unsigned int rf_mode, int UE_flag);
unsigned int build_rflocal(int txi, int txq, int rxi, int rxq)
{
return (txi + (txq<<6) + (rxi<<12) + (rxq<<18));
}
unsigned int build_rfdc(int dcoff_i_rxfe, int dcoff_q_rxfe)
{
return (dcoff_i_rxfe + (dcoff_q_rxfe<<8));
}
void signal_handler(int sig)
{
void *array[10];
size_t size;
if (sig==SIGSEGV) {
// get void*'s for all entries on the stack
size = backtrace(array, 10);
// print out all the frames to stderr
fprintf(stderr, "Error: signal %d:\n", sig);
backtrace_symbols_fd(array, size, 2);
exit(-1);
}
else {
oai_exit=1;
}
}
void exit_fun(const char* s)
{
void *array[10];
size_t size;
printf("Exiting: %s\n",s);
oai_exit=1;
//rt_sleep_ns(FRAME_PERIOD);
//exit (-1);
}
#ifdef XFORMS
extern void ia_receiver_on_off( FL_OBJECT * form, long arg) {}
void *scope_thread(void *arg) {
s16 prach_corr[1024];
char stats_buffer[16384];
//FILE *UE_stats, *eNB_stats;
int i,len=0;
float rxsig_t_dB[4][FRAME_LENGTH_COMPLEX_SAMPLES];
float time[FRAME_LENGTH_COMPLEX_SAMPLES];
struct sched_param sched_param;
int card,ant,idx;
sched_param.sched_priority = sched_get_priority_min(SCHED_FIFO)+1;
sched_setscheduler(0, SCHED_FIFO,&sched_param);
printf("Scope thread has priority %d\n",sched_param.sched_priority);
/*
if (UE_flag==1)
UE_stats = fopen("UE_stats.txt", "w");
else
eNB_stats = fopen("eNB_stats.txt", "w");
*/
while (!oai_exit) {
/*
if (UE_flag==1) {
len = dump_ue_stats (PHY_vars_UE_g[0], stats_buffer, 0, mode,rx_input_level_dBm);
fl_set_object_label(form_stats->stats_text, stats_buffer);
//rewind (UE_stats);
//fwrite (stats_buffer, 1, len, UE_stats);
phy_scope_UE(form_ue[UE_id],
PHY_vars_UE_g[UE_id],
eNB_id,
UE_id,7);
} else {
len = dump_eNB_stats (PHY_vars_eNB_g[0], stats_buffer, 0);
fl_set_object_label(form_stats->stats_text, stats_buffer);
//rewind (eNB_stats);
//fwrite (stats_buffer, 1, len, eNB_stats);
for(UE_id=0;UE_id<scope_enb_num_ue;UE_id++) {
phy_scope_eNB(form_enb[UE_id],
PHY_vars_eNB_g[eNB_id],
UE_id);
}
}
*/
idx = 0;
for (card=0;card<number_of_cards;card++) {
for (ant=0;ant<4;ant++) {
if (carrier_freq[card][ant] != 0) {
len = FRAME_LENGTH_COMPLEX_SAMPLES/(1<<openair0_exmimo_pci[card].exmimo_config_ptr->framing.resampling_factor[ant]);
for (i=0; i<len; i++) {
//rxsig_t_dB[0][i] = 10*log10(1.0+(float) ((((s16*) openair0_exmimo_pci[card].adc_head[0])[2*i])*(((s16*) openair0_exmimo_pci[card].adc_head[0])[2*i])+(((s16*) openair0_exmimo_pci[card].adc_head[0])[2*i+1])*(((s16*) openair0_exmimo_pci[card].adc_head[0])[2*i+1])));
rxsig_t_dB[0][i] = (float) ((((s16*) openair0_exmimo_pci[card].adc_head[ant])[2*i]));
rxsig_t_dB[1][i] = (float) ((((s16*) openair0_exmimo_pci[card].adc_head[ant])[2*i+1]));
time[i] = (float) i;
}
fl_set_xyplot_data(form_lte->channel_t_re[idx],time,rxsig_t_dB[0],len,"","","");
fl_set_xyplot_data(form_lte->channel_t_im[idx],time,rxsig_t_dB[1],len,"","","");
idx++;
}
}
}
//printf("doing forms\n");
usleep(100000);
}
//fclose (UE_stats);
//fclose (eNB_stats);
pthread_exit((void*)arg);
}
#endif
int dummy_tx_buffer[3840*4] __attribute__((aligned(16)));
#ifdef EMOS
#define AQU_LENGTH_FRAMES 100 //Aquisition time in frames
#define AQU_PERIOD_FRAMES 200 //Repetition time of aquisition in frames
#define AQU_LENGTH_SLOTS (AQU_LENGTH_FRAMES*LTE_SLOTS_PER_FRAME) //Aquisition time in slots
#define AQU_PERIOD_SLOTS (AQU_PERIOD_FRAMES*LTE_SLOTS_PER_FRAME) //Repetition time of aquisition in slots
void* gps_thread (void *arg)
{
struct gps_data_t *gps_data = NULL;
struct gps_fix_t dummy_gps_data;
struct sched_param sched_param;
int ret;
sched_param.sched_priority = sched_get_priority_min(SCHED_FIFO)+1;
sched_setscheduler(0, SCHED_FIFO,&sched_param);
printf("GPS thread has priority %d\n",sched_param.sched_priority);
memset(&dummy_gps_data,0,sizeof(struct gps_fix_t));
#if GPSD_API_MAJOR_VERSION>=5
ret = gps_open("127.0.0.1","2947",gps_data);
if (ret!=0)
#else
gps_data = gps_open("127.0.0.1","2947");
if (gps_data == NULL)
#endif
{
printf("[EMOS] Could not open GPS\n");
pthread_exit((void*)arg);
}
#if GPSD_API_MAJOR_VERSION>=4
else if (gps_stream(gps_data, WATCH_ENABLE,NULL) != 0)
#else
else if (gps_query(gps_data, "w+x") != 0)
#endif
{
printf("[EMOS] Error sending command to GPS\n");
pthread_exit((void*) arg);
}
else
printf("[EMOS] Opened GPS, gps_data=%p\n", gps_data);
while (!oai_exit)
{
printf("[EMOS] polling data from gps\n");
#if GPSD_API_MAJOR_VERSION>=5
if (gps_waiting(gps_data,500)) {
if (gps_read(gps_data) != 0) {
#else
if (gps_waiting(gps_data)) {
if (gps_poll(gps_data) != 0) {
#endif
printf("[EMOS] problem polling data from gps\n");
}
else {
memcpy(&dummy_gps_data,gps_data,sizeof(struct gps_fix_t));
printf("[EMOS] lat %g, lon %g\n",gps_data->fix.latitude,gps_data->fix.longitude);
}
} //gps_waiting
else {
printf("[EMOS] WARNING: No GPS data available, storing dummy packet\n");
}
rt_sleep_ns(1000000000LL);
} //oai_exit
pthread_exit((void*) arg);
}
void *emos_thread (void *arg)
{
char c;
char *fifo2file_buffer, *fifo2file_ptr;
int fifo, counter=0, bytes;
long long unsigned int total_bytes=0;
FILE *dumpfile_id;
char dumpfile_name[1024];
time_t starttime_tmp;
struct tm starttime;
time_t timer;
struct tm *now;
struct sched_param sched_param;
int ret;
int card, ant;
int channel_buffer_size=0; //in bytes
sched_param.sched_priority = sched_get_priority_max(SCHED_FIFO)-1;
sched_setscheduler(0, SCHED_FIFO,&sched_param);
printf("EMOS thread has priority %d\n",sched_param.sched_priority);
timer = time(NULL);
now = localtime(&timer);
for (card=0; card<number_of_cards; card++)
for (ant=0; ant<4; ant++)
if (carrier_freq[card][ant] != 0) {
printf("card %d, ant %d\n",card,ant);
channel_buffer_size += SAMPLES_PER_SLOT/(1<<openair0_exmimo_pci[card].exmimo_config_ptr->framing.resampling_factor[ant]);
}
channel_buffer_size *= 4; //4 bytes per sample
// allocate memory for NO_FRAMES_DISK channes estimations
fifo2file_buffer = malloc(AQU_LENGTH_SLOTS*channel_buffer_size);
fifo2file_ptr = fifo2file_buffer;
if (fifo2file_buffer == NULL)
{
printf("[EMOS] Cound not allocate memory for fifo2file_buffer\n");
exit(EXIT_FAILURE);
}
if ((fifo = open(CHANSOUNDER_FIFO_DEV, O_RDONLY)) < 0)
{
fprintf(stderr, "[EMOS] Error opening the fifo\n");
exit(EXIT_FAILURE);
}
time(&starttime_tmp);
localtime_r(&starttime_tmp,&starttime);
snprintf(dumpfile_name,1024,"/mnt/emos/%s_data_%d%02d%02d_%02d%02d%02d.EMOS",
(UE_flag==0) ? "eNB" : "UE",
1900+starttime.tm_year, starttime.tm_mon+1, starttime.tm_mday, starttime.tm_hour, starttime.tm_min, starttime.tm_sec);
dumpfile_id = fopen(dumpfile_name,"w");
if (dumpfile_id == NULL)
{
fprintf(stderr, "[EMOS] Error opening dumpfile %s\n",dumpfile_name);
exit(EXIT_FAILURE);
}
printf("[EMOS] starting dump, channel_buffer_size=%d ...\n",channel_buffer_size);
while (!oai_exit)
{
bytes = rtf_read_timed(fifo, fifo2file_ptr, channel_buffer_size,100);
if (bytes<=0)
continue;
/*
if (UE_flag==0)
printf("eNB: count %d, frame %d, read: %d bytes from the fifo\n",counter, ((fifo_dump_emos_eNB*)fifo2file_ptr)->frame_tx,bytes);
else
printf("UE: count %d, frame %d, read: %d bytes from the fifo\n",counter, ((fifo_dump_emos_UE*)fifo2file_ptr)->frame_rx,bytes);
*/
fifo2file_ptr += channel_buffer_size;
counter ++;
total_bytes += bytes;
if ((counter%AQU_LENGTH_SLOTS)==0)
{
//reset stuff
fifo2file_ptr = fifo2file_buffer;
//counter = 0;
//flush buffer to disk
if (fwrite(fifo2file_buffer, sizeof(char), AQU_LENGTH_SLOTS*channel_buffer_size, dumpfile_id) != AQU_LENGTH_SLOTS*channel_buffer_size)
{
fprintf(stderr, "[EMOS] Error writing to dumpfile\n");
exit(EXIT_FAILURE);
}
else
printf("[EMOS] Frame %d: wrote %d bytes to disk\n",frame,AQU_LENGTH_SLOTS*channel_buffer_size);
}
if ((counter%AQU_LENGTH_SLOTS)==0) {
time(&starttime_tmp);
localtime_r(&starttime_tmp,&starttime);
printf("[EMOS] %02d:%02d:%02d, frame %d, total bytes wrote %llu, bytes lost %d\n", starttime.tm_hour, starttime.tm_min, starttime.tm_sec, frame, total_bytes,lost_bytes);
printf("[EMOS] %02d:%02d:%02d, frame %d, rssi_lin %d, rssi_lin_avg %d, rssi_avg_dB %d, rx_gain %d, LNA %d\n", starttime.tm_hour, starttime.tm_min, starttime.tm_sec, frame, rssi_lin, rssi_lin_avg, rssi_avg_dB, p_exmimo_config->rf.rx_gain[0][0], (p_exmimo_config->rf.rf_mode[0] & LNAGAINMASK) >> 14);
//printf("[EMOS] %02d:%02d:%02d, frame %d, GPS time %e, GPS mode %d, lat %e, lon %e, alt %e, speed %e\n", starttime.tm_hour, starttime.tm_min, starttime.tm_sec, counter/20, dummy_gps_data.time, dummy_gps_data.mode, dummy_gps_data.latitude, dummy_gps_data.longitude, dummy_gps_data.altitude, dummy_gps_data.speed);
}
}
free(fifo2file_buffer);
fclose(dumpfile_id);
close(fifo);
pthread_exit((void*) arg);
}
#endif
/* This is the main eNB thread. It gets woken up by the kernel driver using the RTAI message mechanism (rt_send and rt_receive). */
static void *eNB_thread(void *arg)
{
#ifdef RTAI
RT_TASK *task;
#endif
unsigned char slot=0,last_slot, next_slot, hw_slot;
unsigned int msg1;
unsigned int aa,slot_offset, slot_offset_F;
int diff;
int delay_cnt;
RTIME time_in, time_diff;
int mbox_target=0,mbox_current=0;
int i,ret;
int tx_offset;
int bytes, bytes_tot, bytes_len;
long long int k1=1000;
long long int k2=1024-k1;
int ant,len,card = 0;
#ifdef RTAI
task = rt_task_init_schmod(nam2num("TASK0"), 0, 0, 0, SCHED_FIFO, 0xF);
LOG_D(HW,"Started eNB thread (id %p)\n",task);
#endif
#ifdef HARD_RT
rt_make_hard_real_time();
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
timing_info.time_min = 100000000ULL;
timing_info.time_max = 0;
timing_info.time_avg = 0;
timing_info.n_samples = 0;
while (!oai_exit)
{
hw_slot = (((((volatile unsigned int *)DAQ_MBOX)[0]+1)%150)<<1)/15;
//LOG_D(HW,"eNB frame %d, time %llu: slot %d, hw_slot %d (mbox %d)\n",frame,rt_get_time_ns(),slot,hw_slot,((unsigned int *)DAQ_MBOX)[0]);
//this is the mbox counter where we should be
//mbox_target = ((((slot+1)%20)*15+1)>>1)%150;
mbox_target = mbox_bounds[slot];
//this is the mbox counter where we are
mbox_current = ((volatile unsigned int *)DAQ_MBOX)[0];
//this is the time we need to sleep in order to synchronize with the hw (in multiples of DAQ_PERIOD)
if ((mbox_current>=135) && (mbox_target<15)) //handle the frame wrap-arround
diff = 150-mbox_current+mbox_target;
else if ((mbox_current<15) && (mbox_target>=135))
diff = -150+mbox_target-mbox_current;
else
diff = mbox_target - mbox_current;
if (diff < (-7)) {
// at the eNB, even slots have double as much time since most of the processing is done here and almost nothing in odd slots
LOG_D(HW,"eNB Frame %d, time %llu: missed slot, proceeding with next one (slot %d, hw_slot %d, diff %d)\n",frame, rt_get_time_ns(), slot, hw_slot, diff);
slot++;
if (frame>0)
oai_exit=1;
if (slot==20){
slot=0;
frame++;
}
continue;
}
if (diff>8)
LOG_D(HW,"eNB Frame %d, time %llu: skipped slot, waiting for hw to catch up (slot %d, hw_slot %d, mbox_current %d, mbox_target %d, diff %d)\n",frame, rt_get_time_ns(), slot, hw_slot, mbox_current, mbox_target, diff);
delay_cnt = 0;
while ((diff>0) && (!oai_exit))
{
time_in = rt_get_time_ns();
//LOG_D(HW,"eNB Frame %d delaycnt %d : hw_slot %d (%d), slot %d, (slot+1)*15=%d, diff %d, time %llu\n",frame,delay_cnt,hw_slot,((unsigned int *)DAQ_MBOX)[0],slot,(((slot+1)*15)>>1),diff,time_in);
//LOG_D(HW,"eNB Frame %d, time %llu: sleeping for %llu (slot %d, hw_slot %d, diff %d, mbox %d, delay_cnt %d)\n", frame, time_in, diff*DAQ_PERIOD,slot,hw_slot,diff,((volatile unsigned int *)DAQ_MBOX)[0],delay_cnt);
ret = rt_sleep_ns(diff*DAQ_PERIOD);
if (ret)
LOG_D(HW,"eNB Frame %d, time %llu: rt_sleep_ns returned %d\n",frame, time_in);
hw_slot = (((((volatile unsigned int *)DAQ_MBOX)[0]+1)%150)<<1)/15;
//LOG_D(HW,"eNB Frame %d : hw_slot %d, time %llu\n",frame,hw_slot,rt_get_time_ns());
delay_cnt++;
if (delay_cnt == 10)
{
oai_exit = 1;
LOG_D(HW,"eNB Frame %d: HW stopped ... \n",frame);
}
mbox_current = ((volatile unsigned int *)DAQ_MBOX)[0];
if ((mbox_current>=135) && (mbox_target<15)) //handle the frame wrap-arround
diff = 150-mbox_current+mbox_target;
else if ((mbox_current<15) && (mbox_target>=135))
diff = -150+mbox_target-mbox_current;
else
diff = mbox_target - mbox_current;
}
last_slot = (slot)%LTE_SLOTS_PER_FRAME;
if (last_slot <0)
last_slot+=20;
next_slot = (slot+3)%LTE_SLOTS_PER_FRAME;
if (frame>AQU_LENGTH_FRAMES)
{
timing_info.time_last = timing_info.time_now;
timing_info.time_now = rt_get_time_ns();
if (timing_info.n_samples>0) {
time_diff = timing_info.time_now - timing_info.time_last;
if (time_diff < timing_info.time_min)
timing_info.time_min = time_diff;
if (time_diff > timing_info.time_max)
timing_info.time_max = time_diff;
timing_info.time_avg += time_diff;
}
timing_info.n_samples++;
// do measurements for rssi
if (last_slot==0) {
for (card=0;card<number_of_cards;card++) {
len = SAMPLES_PER_SLOT/(1<<openair0_exmimo_pci[card].exmimo_config_ptr->framing.resampling_factor[0]);
rssi_lin = signal_energy(&(((s32*) openair0_exmimo_pci[card].adc_head[0])[last_slot*len]), len);
rssi_lin_avg = (int) ((k1*((long long int)(rssi_lin_avg)) + (k2*((long long int)(rssi_lin))))>>10);
rssi_avg_dB = dB_fixed(rssi_lin_avg);
if (frame%100==0) {
gain_control_all(rssi_avg_dB,card);
//printf("AGC for card %d: rx_power_fil_dB=%d, rx_gain=%d, LNA=%d (1=Byp,2=Med,3=Max)\n",card,rssi_avg_dB,openair0_exmimo_pci[card].exmimo_config_ptr->rf.rx_gain[0][0],(openair0_exmimo_pci[card].exmimo_config_ptr->rf.rf_mode[0]&LNAGAINMASK)>>14);
}
}
}
#ifdef EMOS
// save raw samples here
if ((last_slot==0) && ((frame%AQU_PERIOD_FRAMES)==0)) {
printf("[EMOS] Frame %d: start writing to FIFO\n",frame);
bytes_tot=0;
}
if ((frame%AQU_PERIOD_FRAMES)<AQU_LENGTH_FRAMES) {
for (card=0; card<number_of_cards; card++) {
for (ant=0; ant<4; ant++) {
if (carrier_freq[card][ant] != 0) {
len = SAMPLES_PER_SLOT/(1<<openair0_exmimo_pci[card].exmimo_config_ptr->framing.resampling_factor[ant]);
bytes_len = len*4;
bytes = rtf_put(CHANSOUNDER_FIFO_MINOR, &(((s32*) openair0_exmimo_pci[card].adc_head[ant])[last_slot*len]), bytes_len);
bytes_tot += bytes;
if (bytes!=bytes_len) {
lost_bytes += bytes_len - bytes;
LOG_W(PHY,"Frame %d, slot %d: Problem writing EMOS data to FIFO (bytes=%d, size=%d)\n",
frame, last_slot, bytes, bytes_len);
}
}
}
}
if ((last_slot==19) && ((frame%AQU_PERIOD_FRAMES)==99))
printf("[EMOS] Frame %d: sent %d bytes to FIFO\n",frame,bytes_tot);
}
#endif
}
slot++;
if (slot==20) {
slot=0;
frame++;
}
#if defined(ENABLE_ITTI)
itti_update_lte_time(frame, slot);
#endif
}
LOG_D(HW,"eNB_thread: finished, ran %d times.\n",frame);
#ifdef HARD_RT
rt_make_soft_real_time();
#endif
// clean task
#ifdef RTAI
rt_task_delete(task);
#endif
LOG_D(HW,"Task deleted. returning\n");
return 0;
}
int main(int argc, char **argv) {
#ifdef RTAI
RT_TASK *task;
#endif
int i,j,aa;
void *status;
int card = 0;
u32 rf_mode_base = TXLPFNORM + TXLPFEN + RXLPFNORM + RXLPFEN + LNA1ON +LNAMax + RFBBNORM;
u32 rf_local[4] = {8255000,8255000,8255000,8255000}; // UE zepto
//{8254617, 8254617, 8254617, 8254617}; //eNB khalifa
//{8255067,8254810,8257340,8257340}; // eNB PETRONAS
u32 rf_vcocal[4] = {910,910,910,910};
u32 rf_vcocal_850[4] = {2015, 2015, 2015, 2015};
u32 rf_rxdc[4] = {32896,32896,32896,32896};
u32 rxgain[4] = {0,0,0,0};
u32 txgain[4] = {0,0,0,0};
u16 Nid_cell = 0;
u8 cooperation_flag=0, transmission_mode=1, abstraction_flag=0;
u8 beta_ACK=0,beta_RI=0,beta_CQI=2;
int c;
char do_forms=0;
unsigned int fd;
unsigned int tcxo = 114;
int amp;
u8 prach_fmt;
int N_ZC;
char rxg_fname[100];
char txg_fname[100];
char rflo_fname[100];
char rfdc_fname[100];
FILE *rxg_fd=NULL;
FILE *txg_fd=NULL;
FILE *rflo_fd=NULL;
FILE *rfdc_fd=NULL;
unsigned int rxg_max[4]={133,133,133,133}, rxg_med[4]={127,127,127,127}, rxg_byp[4]={120,120,120,120};
int tx_max_power=0;
char line[1000];
int l;
int ret, ant;
int ant_offset=0;
int error_code;
char *itti_dump_file = NULL;
const struct option long_options[] = {
{"calib-ue-rx", required_argument, NULL, 256},
{"calib-ue-rx-med", required_argument, NULL, 257},
{"calib-ue-rx-byp", required_argument, NULL, 258},
{"debug-ue-prach", no_argument, NULL, 259},
{"no-L2-connect", no_argument, NULL, 260},
{NULL, 0, NULL, 0}};
//mode = normal_txrx;
while ((c = getopt_long (argc, argv, "C:K:O:ST:UdF:V",long_options,NULL)) != -1)
{
switch (c)
{
case 'V':
ouput_vcd = 1;
break;
case 'd':
do_forms=1;
break;
case 'U':
UE_flag = 1;
break;
case 'C':
for (card=0;card<MAX_CARDS;card++) {
carrier_freq[card][0] = atof(optarg);
carrier_freq[card][1] = atof(optarg);
carrier_freq[card][2] = atof(optarg);
carrier_freq[card][3] = atof(optarg);
}
break;
case 'S':
fs4_test=1;
break;
case 'T':
tcxo=atoi(optarg);
break;
case 'K':
#if defined(ENABLE_ITTI)
itti_dump_file = strdup(optarg);
#else
printf("-K option is disabled when ENABLE_ITTI is not defined\n");
#endif
break;
case 'O':
conf_config_file_name = optarg;
break;
case 'F':
sprintf(rxg_fname,"%srxg.lime",optarg);
rxg_fd = fopen(rxg_fname,"r");
if (rxg_fd) {
printf("Loading RX Gain parameters from %s\n",rxg_fname);
l=0;
while (fgets(line, sizeof(line), rxg_fd)) {
if ((strlen(line)==0) || (*line == '#')) continue; //ignore empty or comment lines
else {
if (l==0) sscanf(line,"%d %d %d %d",&rxg_max[0],&rxg_max[1],&rxg_max[2],&rxg_max[3]);
if (l==1) sscanf(line,"%d %d %d %d",&rxg_med[0],&rxg_med[1],&rxg_med[2],&rxg_med[3]);
if (l==2) sscanf(line,"%d %d %d %d",&rxg_byp[0],&rxg_byp[1],&rxg_byp[2],&rxg_byp[3]);
l++;
}
}
}
else
printf("%s not found, running with defaults\n",rxg_fname);
sprintf(txg_fname,"%stxg.lime",optarg);
txg_fd = fopen(txg_fname,"r");
if (txg_fd) {
printf("Loading TX Gain parameters from %s\n",txg_fname);
l=0;
while (fgets(line, sizeof(line), txg_fd)) {
if ((strlen(line)==0) || (*line == '#')) {
continue; //ignore empty or comment lines
}
else {
if (l==0) sscanf(line,"%d %d %d %d",&txgain[0],&txgain[1],&txgain[2],&txgain[3]);
if (l==1) sscanf(line,"%d",&tx_max_power);
l++;
}
}
}
else
printf("%s not found, running with defaults\n",txg_fname);
sprintf(rflo_fname,"%srflo.lime",optarg);
rflo_fd = fopen(rflo_fname,"r");
if (rflo_fd) {
printf("Loading RF LO parameters from %s\n",rflo_fname);
fscanf(rflo_fd,"%d %d %d %d",&rf_local[0],&rf_local[1],&rf_local[2],&rf_local[3]);
}
else
printf("%s not found, running with defaults\n",rflo_fname);
sprintf(rfdc_fname,"%srfdc.lime",optarg);
rfdc_fd = fopen(rfdc_fname,"r");
if (rfdc_fd) {
printf("Loading RF DC parameters from %s\n",rfdc_fname);
fscanf(rfdc_fd,"%d %d %d %d",&rf_rxdc[0],&rf_rxdc[1],&rf_rxdc[2],&rf_rxdc[3]);
}
else
printf("%s not found, running with defaults\n",rfdc_fname);
break;
/*
case 256:
mode = rx_calib_ue;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA max), input level %d dBm\n",rx_input_level_dBm);
break;
case 257:
mode = rx_calib_ue_med;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA med), input level %d dBm\n",rx_input_level_dBm);
break;
case 258:
mode = rx_calib_ue_byp;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA byp), input level %d dBm\n",rx_input_level_dBm);
break;
case 259:
mode = debug_prach;
break;
case 260:
mode = no_L2_connect;
break;
*/
default:
break;
}
}
if (UE_flag==1)
printf("configuring for UE\n");
else
printf("configuring for eNB\n");
//randominit (0);
//set_taus_seed (0);
// initialize the log (see log.h for details)
logInit();
#if defined(ENABLE_ITTI)
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info, messages_definition_xml, itti_dump_file);
# if defined(ENABLE_USE_MME)
if (itti_create_task(TASK_SCTP, sctp_eNB_task, NULL) < 0) {
LOG_E(EMU, "Create task failed");
LOG_D(EMU, "Initializing SCTP task interface: FAILED\n");
return -1;
}
if (itti_create_task(TASK_S1AP, s1ap_eNB_task, NULL) < 0) {
LOG_E(EMU, "Create task failed");
LOG_D(EMU, "Initializing S1AP task interface: FAILED\n");
return -1;
}
# endif
if (itti_create_task(TASK_L2L1, l2l1_task, NULL) < 0) {
LOG_E(EMU, "Create task failed");
LOG_D(EMU, "Initializing L2L1 task interface: FAILED\n");
return -1;
}
// Handle signals until all tasks are terminated
// itti_wait_tasks_end();
#endif
if (ouput_vcd) {
if (UE_flag==1)
vcd_signal_dumper_init("/tmp/openair_dump_UE.vcd");
else
vcd_signal_dumper_init("/tmp/openair_dump_eNB.vcd");
}
#ifdef NAS_NETLINK
netlink_init();
#endif
// to make a graceful exit when ctrl-c is pressed
signal(SIGSEGV, signal_handler);
signal(SIGINT, signal_handler);
#ifndef RTAI
check_clock();
#endif
g_log->log_component[HW].level = LOG_DEBUG;
g_log->log_component[HW].flag = LOG_HIGH;
#ifdef OPENAIR2
g_log->log_component[PHY].level = LOG_INFO;
#else
g_log->log_component[PHY].level = LOG_DEBUG;
#endif
g_log->log_component[PHY].flag = LOG_HIGH;
g_log->log_component[MAC].level = LOG_INFO;
g_log->log_component[MAC].flag = LOG_HIGH;
g_log->log_component[RLC].level = LOG_INFO;
g_log->log_component[RLC].flag = LOG_HIGH;
g_log->log_component[PDCP].level = LOG_INFO;
g_log->log_component[PDCP].flag = LOG_HIGH;
g_log->log_component[OTG].level = LOG_INFO;
g_log->log_component[OTG].flag = LOG_HIGH;
g_log->log_component[RRC].level = LOG_INFO;
g_log->log_component[RRC].flag = LOG_HIGH;
// Initialize card
ret = openair0_open();
if ( ret != 0 ) {
if (ret == -1)
printf("Error opening /dev/openair0");
if (ret == -2)
printf("Error mapping bigshm");
if (ret == -3)
printf("Error mapping RX or TX buffer");
return(ret);
}
number_of_cards = openair0_num_detected_cards;
for (card=0; card<number_of_cards; card++) {
printf ("Configuring card %d of %d (number of antennas %d).\n", card, openair0_num_detected_cards, openair0_num_antennas[card]);
p_exmimo_config = openair0_exmimo_pci[card].exmimo_config_ptr;
p_exmimo_id = openair0_exmimo_pci[card].exmimo_id_ptr;
printf("Card %d: ExpressMIMO %d, HW Rev %d, SW Rev 0x%d\n", card, p_exmimo_id->board_exmimoversion, p_exmimo_id->board_hwrev, p_exmimo_id->board_swrev);
if (p_exmimo_id->board_swrev>=BOARD_SWREV_CNTL2)
p_exmimo_config->framing.eNB_flag = 0;
else
p_exmimo_config->framing.eNB_flag = !UE_flag;
//p_exmimo_config->framing.multicard_syncmode = SYNCMODE_FREE;
if (card==0)
p_exmimo_config->framing.multicard_syncmode = SYNCMODE_MASTER;
else
p_exmimo_config->framing.multicard_syncmode = SYNCMODE_SLAVE;
p_exmimo_config->framing.tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_TESTRX; //TXRXSWITCH_LSB;
/*
for (ant=0;ant<max(frame_parms->nb_antennas_tx,frame_parms->nb_antennas_rx);ant++)
p_exmimo_config->rf.rf_mode[ant] = rf_mode_base;
for (ant=0;ant<frame_parms->nb_antennas_tx;ant++)
p_exmimo_config->rf.rf_mode[ant] += (TXEN + DMAMODE_TX);
for (ant=0;ant<frame_parms->nb_antennas_rx;ant++)
p_exmimo_config->rf.rf_mode[ant] += (RXEN + DMAMODE_RX);
for (ant=max(frame_parms->nb_antennas_tx,frame_parms->nb_antennas_rx);ant<4;ant++) {
p_exmimo_config->rf.rf_mode[ant] = 0;
carrier_freq[ant] = 0; //this turns off all other LIMEs
}
*/
for (ant=0; ant<4; ant++) {
if (carrier_freq[card][ant] != 0) {
p_exmimo_config->rf.rf_mode[ant] = rf_mode_base;
switch (bandwidth[card]) {
case BW20:
p_exmimo_config->framing.resampling_factor[ant] = 0;
p_exmimo_config->rf.rf_mode[ant] += RXLPF10 + TXLPF10;
break;
case BW10:
p_exmimo_config->framing.resampling_factor[ant] = 1;
p_exmimo_config->rf.rf_mode[ant] += RXLPF5 + TXLPF5;
break;
case BW5:
p_exmimo_config->framing.resampling_factor[ant] = 2;
p_exmimo_config->rf.rf_mode[ant] += RXLPF25 + TXLPF25;
break;
}
//p_exmimo_config->rf.rf_mode[ant] += (TXEN + DMAMODE_TX);
p_exmimo_config->rf.rf_mode[ant] += (RXEN + DMAMODE_RX);
}
else {
p_exmimo_config->rf.rf_mode[ant] = 0;
}
}
for (ant = 0; ant<4; ant++) {
p_exmimo_config->rf.do_autocal[ant] = 1;
p_exmimo_config->rf.rf_freq_rx[ant] = carrier_freq[card][ant];
p_exmimo_config->rf.rf_freq_tx[ant] = carrier_freq[card][ant];
p_exmimo_config->rf.rx_gain[ant][0] = rxgain[ant];
p_exmimo_config->rf.tx_gain[ant][0] = txgain[ant];
p_exmimo_config->rf.rf_local[ant] = rf_local[ant];
p_exmimo_config->rf.rf_rxdc[ant] = rf_rxdc[ant];
if ((carrier_freq[card][ant] >= 850000000) && (carrier_freq[card][ant] <= 865000000)) {
p_exmimo_config->rf.rf_vcocal[ant] = rf_vcocal_850[ant];
p_exmimo_config->rf.rffe_band_mode[ant] = DD_TDD;
}
else if ((carrier_freq[card][ant] >= 1900000000) && (carrier_freq[card][ant] <= 2000000000)) {
p_exmimo_config->rf.rf_vcocal[ant] = rf_vcocal[ant];
p_exmimo_config->rf.rffe_band_mode[ant] = B19G_TDD;
}
else {
p_exmimo_config->rf.rf_vcocal[ant] = rf_vcocal[ant];
p_exmimo_config->rf.rffe_band_mode[ant] = 0;
}
p_exmimo_config->rf.rffe_gain_txlow[ant] = 31;
p_exmimo_config->rf.rffe_gain_txhigh[ant] = 31;
p_exmimo_config->rf.rffe_gain_rxfinal[ant] = 52;
p_exmimo_config->rf.rffe_gain_rxlow[ant] = 31;
}
openair0_dump_config(card);
printf("EXMIMO_CONFIG card %d: freq0..3 %u %u %u %u Hz, freqtx0..1 %u %u Hz, RX gain0..1 %d %d dB\n",
card,
p_exmimo_config->rf.rf_freq_rx[0],
p_exmimo_config->rf.rf_freq_rx[1],
p_exmimo_config->rf.rf_freq_rx[2],
p_exmimo_config->rf.rf_freq_rx[3],
p_exmimo_config->rf.rf_freq_tx[0],
p_exmimo_config->rf.rf_freq_tx[1],
p_exmimo_config->rf.rx_gain[0][0],
p_exmimo_config->rf.rx_gain[1][0]);
printf("EXMIMO_CONFIG card %d: rf_mode 0x %x %x %x %x, [0]: TXRXEn %d, TXLPFEn %d, TXLPF %d, RXLPFEn %d, RXLPF %d, RFBB %d, LNA %d, LNAGain %d, RXLPFMode %d, SWITCH %d, rf_rxdc %d, rf_local %d, rf_vcocal %d\n",
card,
p_exmimo_config->rf.rf_mode[0],
p_exmimo_config->rf.rf_mode[1],
p_exmimo_config->rf.rf_mode[2],
p_exmimo_config->rf.rf_mode[3],
(p_exmimo_config->rf.rf_mode[0]&3), // RXen+TXen
(p_exmimo_config->rf.rf_mode[0]&4)>>2, //TXLPFen
(p_exmimo_config->rf.rf_mode[0]&TXLPFMASK)>>3, //TXLPF
(p_exmimo_config->rf.rf_mode[0]&128)>>7, //RXLPFen
(p_exmimo_config->rf.rf_mode[0]&RXLPFMASK)>>8, //TXLPF
(p_exmimo_config->rf.rf_mode[0]&RFBBMASK)>>16, // RFBB mode
(p_exmimo_config->rf.rf_mode[0]&LNAMASK)>>12, // RFBB mode
(p_exmimo_config->rf.rf_mode[0]&LNAGAINMASK)>>14, // RFBB mode
(p_exmimo_config->rf.rf_mode[0]&RXLPFMODEMASK)>>19, // RXLPF mode
(p_exmimo_config->framing.tdd_config&TXRXSWITCH_MASK)>>1, // Switch mode
p_exmimo_config->rf.rf_rxdc[0],
p_exmimo_config->rf.rf_local[0],
p_exmimo_config->rf.rf_vcocal[0]);
for (ant=0;ant<4;ant++)
p_exmimo_config->rf.do_autocal[ant] = 0;
} //card
card=0;
#ifdef EMOS
error_code = rtf_create(CHANSOUNDER_FIFO_MINOR,CHANSOUNDER_FIFO_SIZE);
if (error_code==0)
printf("[OPENAIR][SCHED][INIT] Created EMOS FIFO %d\n",CHANSOUNDER_FIFO_MINOR);
else if (error_code==ENODEV)
printf("[OPENAIR][SCHED][INIT] Problem: EMOS FIFO %d is greater than or equal to RTF_NO\n",CHANSOUNDER_FIFO_MINOR);
else if (error_code==ENOMEM)
printf("[OPENAIR][SCHED][INIT] Problem: cannot allocate memory for EMOS FIFO %d\n",CHANSOUNDER_FIFO_MINOR);
else
printf("[OPENAIR][SCHED][INIT] Problem creating EMOS FIFO %d, error_code %d\n",CHANSOUNDER_FIFO_MINOR,error_code);
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
#ifdef RTAI
// make main thread LXRT soft realtime
task = rt_task_init_schmod(nam2num("MYTASK"), 9, 0, 0, SCHED_FIFO, 0xF);
// start realtime timer and scheduler
//rt_set_oneshot_mode();
rt_set_periodic_mode();
start_rt_timer(0);
//now = rt_get_time() + 10*PERIOD;
//rt_task_make_periodic(task, now, PERIOD);
printf("Init mutex\n");
//mutex = rt_get_adr(nam2num("MUTEX"));
mutex = rt_sem_init(nam2num("MUTEX"), 1);
if (mutex==0)
{
printf("Error init mutex\n");
exit(-1);
}
else
printf("mutex=%p\n",mutex);
#endif
DAQ_MBOX = (volatile unsigned int *) openair0_exmimo_pci[card].rxcnt_ptr[0];
// this starts the DMA transfers
if (UE_flag!=1)
for (card=0;card<number_of_cards;card++)
openair0_start_rt_acquisition(card);
#ifdef XFORMS
if (do_forms==1) {
fl_initialize (&argc, argv, NULL, 0, 0);
/*
form_stats = create_form_stats_form();
if (UE_flag==1) {
form_ue[UE_id] = create_lte_phy_scope_ue();
sprintf (title, "LTE DL SCOPE UE");
fl_show_form (form_ue[UE_id]->lte_phy_scope_ue, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
} else {
for(UE_id=0;UE_id<scope_enb_num_ue;UE_id++) {
form_enb[UE_id] = create_lte_phy_scope_enb();
sprintf (title, "UE%d LTE UL SCOPE eNB",UE_id+1);
fl_show_form (form_enb[UE_id]->lte_phy_scope_enb, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
}
}
fl_show_form (form_stats->stats_form, FL_PLACE_HOTSPOT, FL_FULLBORDER, "stats");
if (UE_flag==0) {
for (UE_id=0;UE_id<scope_enb_num_ue;UE_id++) {
if (otg_enabled) {
fl_set_button(form_enb[UE_id]->button_0,1);
fl_set_object_label(form_enb[UE_id]->button_0,"DL Traffic ON");
}
else {
fl_set_button(form_enb[UE_id]->button_0,0);
fl_set_object_label(form_enb[UE_id]->button_0,"DL Traffic OFF");
}
}
}
else {
if (openair_daq_vars.use_ia_receiver) {
fl_set_button(form_ue[UE_id]->button_0,1);
fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver ON");
}
else {
fl_set_button(form_ue[UE_id]->button_0,0);
fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver OFF");
}
}
*/
form_lte = create_form_lte_scope();
fl_show_form (form_lte->lte_scope, FL_PLACE_HOTSPOT, FL_FULLBORDER, "Scope");
ret = pthread_create(&thread2, NULL, scope_thread, NULL);
printf("Scope thread created, ret=%d\n",ret);
}
#endif
#ifdef EMOS
ret = pthread_create(&thread3, NULL, emos_thread, NULL);
printf("EMOS thread created, ret=%d\n",ret);
ret = pthread_create(&thread4, NULL, gps_thread, NULL);
printf("GPS thread created, ret=%d\n",ret);
#endif
rt_sleep_ns(10*FRAME_PERIOD);
#ifndef RTAI
pthread_attr_init (&attr_dlsch_threads);
pthread_attr_setstacksize(&attr_dlsch_threads,OPENAIR_THREAD_STACK_SIZE);
//attr_dlsch_threads.priority = 1;
sched_param_dlsch.sched_priority = sched_get_priority_max(SCHED_FIFO); //OPENAIR_THREAD_PRIORITY;
pthread_attr_setschedparam (&attr_dlsch_threads, &sched_param_dlsch);
pthread_attr_setschedpolicy (&attr_dlsch_threads, SCHED_FIFO);
#endif
// start the main thread
if (UE_flag == 1) {
/*
#ifdef RTAI
thread1 = rt_thread_create(UE_thread, NULL, 100000000);
#else
error_code = pthread_create(&thread1, &attr_dlsch_threads, UE_thread, NULL);
if (error_code!= 0) {
LOG_D(HW,"[lte-softmodem.c] Could not allocate UE_thread, error %d\n",error_code);
return(error_code);
}
else {
LOG_D(HW,"[lte-softmodem.c] Allocate UE_thread successful\n");
}
#endif
#ifdef DLSCH_THREAD
init_rx_pdsch_thread();
rt_sleep_ns(FRAME_PERIOD/10);
init_dlsch_threads();
#endif
printf("UE threads created\n");
*/
}
else {
#ifdef RTAI
thread0 = rt_thread_create(eNB_thread, NULL, 100000000);
#else
error_code = pthread_create(&thread0, &attr_dlsch_threads, eNB_thread, NULL);
if (error_code!= 0) {
LOG_D(HW,"[lte-softmodem.c] Could not allocate eNB_thread, error %d\n",error_code);
return(error_code);
}
else {
LOG_D(HW,"[lte-softmodem.c] Allocate eNB_thread successful\n");
}
#endif
#ifdef ULSCH_THREAD
init_ulsch_threads();
#endif
printf("eNB threads created\n");
}
// wait for end of program
printf("TYPE <CTRL-C> TO TERMINATE\n");
//getchar();
while (oai_exit==0)
rt_sleep_ns(FRAME_PERIOD);
// stop threads
#ifdef XFORMS
printf("waiting for XFORMS thread\n");
if (do_forms==1)
{
pthread_join(thread2,&status);
/*
fl_hide_form(form_stats->stats_form);
fl_free_form(form_stats->stats_form);
if (UE_flag==1) {
fl_hide_form(form_ue[UE_id]->lte_phy_scope_ue);
fl_free_form(form_ue[UE_id]->lte_phy_scope_ue);
} else {
for(UE_id=0;UE_id<scope_enb_num_ue;UE_id++) {
fl_hide_form(form_enb[UE_id]->lte_phy_scope_enb);
fl_free_form(form_enb[UE_id]->lte_phy_scope_enb);
}
}
*/
fl_hide_form(form_lte->lte_scope);
fl_free_form(form_lte->lte_scope);
}
#endif
printf("stopping MODEM threads\n");
// cleanup
if (UE_flag == 1) {
/*
#ifdef RTAI
rt_thread_join(thread1);
#else
pthread_join(thread1,&status);
#endif
#ifdef DLSCH_THREAD
cleanup_dlsch_threads();
cleanup_rx_pdsch_thread();
#endif
*/
}
else {
#ifdef RTAI
rt_thread_join(thread0);
#else
pthread_join(thread0,&status);
#endif
#ifdef ULSCH_THREAD
cleanup_ulsch_threads();
#endif
}
#ifdef OPENAIR2
//cleanup_pdcp_thread();
#endif
#ifdef RTAI
stop_rt_timer();
#endif
printf("stopping card\n");
for (card=0;card<number_of_cards;card++)
openair0_stop(card);
printf("closing openair0_lib\n");
openair0_close();
#ifdef EMOS
printf("waiting for EMOS thread\n");
pthread_cancel(thread3);
pthread_join(thread3,&status);
printf("waiting for GPS thread\n");
pthread_cancel(thread4);
pthread_join(thread4,&status);
#endif
#ifdef EMOS
error_code = rtf_destroy(CHANSOUNDER_FIFO_MINOR);
printf("[OPENAIR][SCHED][CLEANUP] EMOS FIFO closed, error_code %d\n", error_code);
#endif
if (ouput_vcd)
vcd_signal_dumper_close();
logClean();
return 0;
}
void test_config(int card, int ant, unsigned int rf_mode, int UE_flag) {
p_exmimo_config->framing.eNB_flag = !UE_flag;
p_exmimo_config->framing.tdd_config = 0;
p_exmimo_config->framing.resampling_factor[ant] = 2;
p_exmimo_config->rf.rf_freq_rx[ant] = 1907600000;
p_exmimo_config->rf.rf_freq_tx[ant] = 1907600000;;
p_exmimo_config->rf.rx_gain[ant][0] = 20;
p_exmimo_config->rf.tx_gain[ant][0] = 10;
p_exmimo_config->rf.rf_mode[ant] = rf_mode;
p_exmimo_config->rf.rf_local[ant] = build_rflocal(20,25,26,04);
p_exmimo_config->rf.rf_rxdc[ant] = build_rfdc(128, 128);
p_exmimo_config->rf.rf_vcocal[ant] = (0xE<<6) + 0xE;
}
/*
void setup_ue_buffers(PHY_VARS_UE *phy_vars_ue, LTE_DL_FRAME_PARMS *frame_parms, int carrier) {
int i;
if (phy_vars_ue) {
if ((frame_parms->nb_antennas_rx>1) && (carrier>0)) {
printf("RX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
if ((frame_parms->nb_antennas_tx>1) && (carrier>0)) {
printf("TX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
// replace RX signal buffers with mmaped HW versions
for (i=0;i<frame_parms->nb_antennas_rx;i++) {
free(phy_vars_ue->lte_ue_common_vars.rxdata[i]);
phy_vars_ue->lte_ue_common_vars.rxdata[i] = (s32*) openair0_exmimo_pci[card].adc_head[i+carrier];
printf("rxdata[%d] @ %p\n",i,phy_vars_ue->lte_ue_common_vars.rxdata[i]);
}
for (i=0;i<frame_parms->nb_antennas_tx;i++) {
free(phy_vars_ue->lte_ue_common_vars.txdata[i]);
phy_vars_ue->lte_ue_common_vars.txdata[i] = (s32*) openair0_exmimo_pci[card].dac_head[i+carrier];
printf("txdata[%d] @ %p\n",i,phy_vars_ue->lte_ue_common_vars.txdata[i]);
}
}
}
void setup_eNB_buffers(PHY_VARS_eNB *phy_vars_eNB, LTE_DL_FRAME_PARMS *frame_parms, int carrier) {
int i,j;
if (phy_vars_eNB) {
if ((frame_parms->nb_antennas_rx>1) && (carrier>0)) {
printf("RX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
if ((frame_parms->nb_antennas_tx>1) && (carrier>0)) {
printf("TX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
// replace RX signal buffers with mmaped HW versions
for (i=0;i<frame_parms->nb_antennas_rx;i++) {
free(phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i]);
phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i] = (s32*) openair0_exmimo_pci[card].adc_head[i+carrier];
printf("rxdata[%d] @ %p\n",i,phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i]);
for (j=0;j<16;j++) {
printf("rxbuffer %d: %x\n",j,phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i][j]);
phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i][j] = 16-j;
}
}
for (i=0;i<frame_parms->nb_antennas_tx;i++) {
free(phy_vars_eNB->lte_eNB_common_vars.txdata[0][i]);
phy_vars_eNB->lte_eNB_common_vars.txdata[0][i] = (s32*) openair0_exmimo_pci[card].dac_head[i+carrier];
printf("txdata[%d] @ %p\n",i,phy_vars_eNB->lte_eNB_common_vars.txdata[0][i]);
for (j=0;j<16;j++) {
printf("txbuffer %d: %x\n",j,phy_vars_eNB->lte_eNB_common_vars.txdata[0][i][j]);
phy_vars_eNB->lte_eNB_common_vars.txdata[0][i][j] = 16-j;
}
}
}
}
*/
targets/RTAI/USER/enb2tx_850rflo.lime deleted 100644 → 0
View file @ 337df938
8254992 8254992 8257340 8257340
\ No newline at end of file
targets/RTAI/USER/enb2txrflo.lime deleted 100644 → 0
View file @ 337df938
8254744 8255063 8257340 8257340
targets/RTAI/USER/enb2txrxg.lime deleted 100644 → 0
View file @ 337df938
# this file contains the calibration values to compute the RSSI
# we can use three different gain stages (high, low, med) as well as a gain factor for fine tuning
# the three lines in this file gives the total rx gain in dB for the three gain stages if the rx gain is set to 30dB
# high gain
138 138 138 138
# med gain
129 129 129 129
# low gain
120 120 120 120
targets/RTAI/USER/enb2txtxg.lime deleted 100644 → 0
View file @ 337df938
# For the TX, we need to set the tx gain values such that the transmitted power on all antennas is the same
# tx gain (dB)
25 19 25 25
# total tx power (dBm)
17
targets/RTAI/USER/enb4txrflo.lime deleted 100644 → 0
View file @ 337df938
8255067 8254810 8257340 8257340
targets/RTAI/USER/enb4txrxg.lime deleted 100644 → 0
View file @ 337df938
133 133 133 133
127 127 127 127
120 120 120 120
targets/RTAI/USER/ex2_2rflo.lime deleted 100644 → 0
View file @ 337df938
8256036 8256804 8257340 8257340
targets/RTAI/USER/ex2_2rxg.lime deleted 100644 → 0
View file @ 337df938
# this file contains the calibration values to compute the RSSI
# we can use three different gain stages (high, low, med) as well as a gain factor for fine tuning
# the three lines in this file gives the total rx gain in dB for the three gain stages if the rx gain is set to 30dB
# this is for Express MIMO2 without any additional RF frontend
# high gain
124 124 124 124
# med gain
118 118 118 118
# low gain (byp)
109 109 109 109
targets/RTAI/USER/ex2_2txg.lime deleted 100644 → 0
View file @ 337df938
# For the TX, we need to set the tx gain values such that the transmitted power on all antennas is the same
# tx gain (dB)
# 25 19 25 25
10 10 10 10
# total tx power (dBm)
17
targets/RTAI/USER/ex2_850rflo.lime deleted 100644 → 0
View file @ 337df938
8254212 8256991 8257340 8257340
targets/RTAI/USER/ex2_850rxg.lime deleted 100644 → 0
View file @ 337df938
# this file contains the calibration values to compute the RSSI
# we can use three different gain stages (high, low, med) as well as a gain factor for fine tuning
# the three lines in this file gives the total rx gain in dB for the three gain stages if the rx gain is set to 30dB
# this is for Express MIMO2 without any additional RF frontend
# high gain
124 124 124 124
# med gain
118 118 118 118
# low gain (byp)
109 109 109 109
targets/RTAI/USER/ex2_850txg.lime deleted 100644 → 0
View file @ 337df938
# For the TX, we need to set the tx gain values such that the transmitted power on all antennas is the same
# tx gain (dB)
# 25 19 25 25
0 0 0 0
# total tx power (dBm)
17
targets/RTAI/USER/ieee80211p-softmodem.c deleted 100644 → 0
View file @ 337df938
/******************************************************************************
*
* Copyright(c) EURECOM / Thales Communications & Security
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Thales Communications & Security <philippe.agostini@thalesgroup.com>
*
*****************************************************************************/
/******************************************************************************
*
* Includes
*
*****************************************************************************/
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include "ieee80211p-netlinkapi.h"
#include "phy/DOT11/defs.h"
#include "PHY/TOOLS/defs.h"
#include <stdint.h>
#include <string.h>
#include <pthread.h>
#include <rtai_lxrt.h>
#include <rtai_sem.h>
#include <rtai_msg.h>
/******************************************************************************
*
* Definitions
*
*****************************************************************************/
enum nl80211_band {
NL80211_BAND_2GHZ,
NL80211_BAND_5GHZ,
NL80211_BAND_5_9GHZ,
NL80211_BAND_0_8GHZ,
};
enum ieee80211_band {
IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
IEEE80211_BAND_5_9GHZ = NL80211_BAND_5_9GHZ,
IEEE80211_BAND_0_8GHZ = NL80211_BAND_0_8GHZ,
};
struct ieee80211p_rx_status {
short data_len; //frame data length in bytes
char rssi; //received power in dBm
char rate; //reveived data rate in units of 100 kbps
enum ieee80211_band band;
char flags; //RX flags
}; /* struct ieee80211p_rx_status */
extern uint32_t *txdata[2],*rxdata[2];
//CHANNEL_STATUS_t dot11_state = IDLE;
extern int oai_exit;
extern unsigned int *DAQ_MBOX;
extern int Ndbps[8];
extern int32_t rxDATA_F_comp_aggreg2[48*1024];
extern int32_t rxDATA_F_comp_aggreg3[48*1024];
extern uint32_t rxgain[4];
extern uint32_t rxg_max[4], rxg_med[4], rxg_byp[4];
#define FRAME_LENGTH_SAMPLES 76800
#define RX_THRES 60
#define SLOT_DURATION_5MHz 105
#define RX_THRES_dB 40
int tx_sdu_active = 0;
int tx_sdu_length = 0;
char rxsdu[2000];
void *tx_thread(void *arg) {
int fd=*((int*)arg);
RT_TASK *task;
int ret;
int i;
char dummy_data[10];
if (fd > 0) {
ret = netlink_send(fd,NLCMD_INIT,10,&dummy_data[0]);
printf("tx_thread starting, fd %d\n",fd);
task = rt_task_init_schmod(nam2num("TASK1"), 0, 0, 0, SCHED_FIFO, 0xF);
mlockall(MCL_CURRENT | MCL_FUTURE);
// rt_make_hard_real_time();
while (!oai_exit) {
if (tx_sdu_active == 1)
printf("tx_thread: waiting (MBOX %d)\n",((unsigned int*)DAQ_MBOX)[0]);
while(((volatile int)tx_sdu_active) != 0) {
rt_sleep(nano2count(66666));
}
printf("tx_thread: calling netlink\n");
ret = netlink_recv(fd,rxsdu);
tx_sdu_active = 1;
tx_sdu_length = ret;
/*
if (ret > 0) {
printf("received TX SDU: ");
for (i=0;i<ret;i++) {
printf("%02hhx ",rxsdu[i]);
}
printf("\n");
}
*/
}
}
else {
printf("tx_thread: no netlink\n");
}
printf("tx_thread exiting\n");
return(0);
}
/******************************************************************************
*
* Main
*
*****************************************************************************/
/*
int dot11_netlink_init() {
int fd;
int ret;
int i;
char txdata[10];
fd = netlink_init();
if (fd < 0) {
return -1;
}
ret = netlink_send(fd,NLCMD_INIT,10,&txdata[0]);
return(fd);
}
*/
targets/RTAI/USER/init_exmimo.sh deleted 100644 → 0
View file @ 337df938
sudo rmmod openair_rf
sudo insmod $OPENAIR1_DIR/ARCH/CBMIMO1/DEVICE_DRIVER/openair_rf_softmodem.ko
sudo mknod /dev/openair0 c 127 0
sudo chmod a+rw /dev/openair0
$OPENAIR1_DIR/USERSPACE_TOOLS/OAI_FW_INIT/updatefw -f $OPENAIR1_DIR/USERSPACE_TOOLS/OAI_FW_INIT/main -s 0x43fffff0
sudo rmmod openair_rf
sudo insmod $OPENAIR1_DIR/ARCH/CBMIMO1/DEVICE_DRIVER/openair_rf_softmodem.ko
sudo rmmod nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
targets/RTAI/USER/init_exmimo2.sh deleted 100644 → 0
View file @ 337df938
#!/bin/bash
PCI=`lspci -m | grep Xilinx`
if [ -z "$PCI" ]; then
echo "No card found. Stopping!"
return
fi
## This part corrects the wrong configuration of the endpoint done by the bios in some machines
echo "$PCI" | while read config_reg; do
SLOT_NUMBER=`echo $config_reg | awk -F\" '{print $1}'`
sudo setpci -s $SLOT_NUMBER 60.b=10
done
sudo rmmod openair_rf
sudo insmod $OPENAIR_TARGETS/ARCH/EXMIMO/DRIVER/eurecom/openair_rf.ko
sleep 1
if [ ! -e /dev/openair0 ]; then
sudo mknod /dev/openair0 c 127 0
sudo chmod a+rw /dev/openair0
fi
DEVICE=`echo $PCI | awk -F\" '{print $(NF-1)}' | awk '{print $2}'`
if [ $DEVICE == '2208' ]; then
echo "Using firmware version 8"
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2
else
if [ $DEVICE == '2209' ]; then
echo "Using firmware version 9"
#$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR0_DIR/express-mimo/software/sdr/exmimo2/sdr_expressmimo2
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v9
else
if [ $DEVICE == '220a' ]; then
echo "Using firware version 10"
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10
else
echo 'No corresponding firmware found'
return
fi
fi
fi
sudo rmmod nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
if [ "$1" = "eNB" ]; then
echo "bring up oai0 interface for enb"
sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.9 -r 3
else
if [ "$1" = "UE" ]; then
echo "bring up oai0 interface for UE"
sudo ifconfig oai0 10.0.1.9 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.9 -t 10.0.1.1 -r 3
fi
fi
targets/RTAI/USER/lte-enb.c deleted 100644 → 0
View file @ 337df938
/*******************************************************************************
Eurecom OpenAirInterface
Copyright(c) 1999 - 2011 Eurecom
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information
Openair Admin: openair_admin@eurecom.fr
Openair Tech : openair_tech@eurecom.fr
Forums : http://forums.eurecom.fsr/openairinterface
Address : Eurecom, 2229, route des crêtes, 06560 Valbonne Sophia Antipolis, France
*******************************************************************************/
/*! \file lte-softmodem.c
* \brief main program to control HW and scheduling
* \author R. Knopp, F. Kaltenberger
* \date 2012
* \version 0.1
* \company Eurecom
* \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr
* \note
* \warning
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sched.h>
#include <signal.h>
#include <execinfo.h>
#include <getopt.h>
#include "rt_wrapper.h"
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
#include "assertions.h"
#ifdef EMOS
#include <gps.h>
#endif
#include "PHY/types.h"
#include "PHY/defs.h"
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all
#include "openair0_lib.h"
#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all
#include "PHY/vars.h"
#include "MAC_INTERFACE/vars.h"
#include "SCHED/vars.h"
#include "LAYER2/MAC/vars.h"
#include "../../SIMU/USER/init_lte.h"
#ifdef EMOS
#include "SCHED/phy_procedures_emos.h"
#endif
#ifdef OPENAIR2
#include "LAYER2/MAC/defs.h"
#include "LAYER2/MAC/vars.h"
#ifndef CELLULAR
#include "RRC/LITE/vars.h"
#endif
#include "PHY_INTERFACE/vars.h"
#endif
#include "UTIL/LOG/log_extern.h"
#include "UTIL/OTG/otg.h"
#include "UTIL/OTG/otg_vars.h"
#include "UTIL/MATH/oml.h"
#include "UTIL/LOG/vcd_signal_dumper.h"
#include "enb_config.h"
#if defined(ENABLE_ITTI)
# include "intertask_interface_init.h"
# include "create_tasks.h"
# if defined(ENABLE_USE_MME)
# include "s1ap_eNB.h"
# endif
#endif
#ifdef XFORMS
#include "PHY/TOOLS/lte_phy_scope.h"
#include "stats.h"
// current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
// at eNB 0, an UL scope for every UE
FD_lte_phy_scope_ue *form_ue[NUMBER_OF_UE_MAX];
FD_lte_phy_scope_enb *form_enb[NUMBER_OF_UE_MAX];
FD_stats_form *form_stats=NULL;
char title[255];
int UE_id;
unsigned char scope_enb_num_ue = 1;
#endif //XFORMS
unsigned char UE_flag=0;
char *mme_ip;
#define FRAME_PERIOD 100000000ULL
#define DAQ_PERIOD 66667ULL
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
#ifdef RTAI
static SEM *mutex;
//static CND *cond;
static int thread0;
static int thread1;
//static int sync_thread;
#else
pthread_t thread0;
pthread_t thread1;
pthread_attr_t attr_dlsch_threads;
struct sched_param sched_param_dlsch;
#endif
pthread_t thread2;
pthread_t thread3;
/*
static int instance_cnt=-1; //0 means worker is busy, -1 means its free
int instance_cnt_ptr_kern,*instance_cnt_ptr_user;
int pci_interface_ptr_kern;
*/
//extern unsigned int bigphys_top;
//extern unsigned int mem_base;
int card = 0;
exmimo_config_t *p_exmimo_config;
exmimo_id_t *p_exmimo_id;
volatile unsigned int *DAQ_MBOX;
#if defined(ENABLE_ITTI)
volatile int start_eNB = 0;
#endif
volatile int oai_exit = 0;
int oai_flag = 0;
//int time_offset[4] = {-138,-138,-138,-138};
//int time_offset[4] = {-145,-145,-145,-145};
int time_offset[4] = {0,0,0,0};
u8 eNB_id=0;
u32 carrier_freq_fdd[4]= {2680e6,0,0,0};
u32 carrier_freq_tdd[4]= {2590e6-4000,0,0,0};
u32 carrier_freq[4];
static char *conf_config_file_name = NULL;
struct timing_info_t {
//unsigned int frame, hw_slot, last_slot, next_slot;
RTIME time_min, time_max, time_avg, time_last, time_now;
//unsigned int mbox0, mbox1, mbox2, mbox_target;
unsigned int n_samples;
} timing_info;
runmode_t mode;
int rx_input_level_dBm;
#ifdef XFORMS
extern int otg_enabled;
#else
int otg_enabled;
#endif
int number_of_cards = 1;
//int mbox_bounds[20] = {8,16,24,30,38,46,54,60,68,76,84,90,98,106,114,120,128,136,144, 0}; ///boundaries of slots in terms ob mbox counter rounded up to even numbers
//int mbox_bounds[10] = {15, 30, 45, 60, 75, 90, 105, 120, 135, 0}; // mbox boundaries of subframes
int mbox_bounds[10] = {14, 28, 44, 58, 74, 88, 104, 118, 134, 148}; // mbox boundaries of subframes
//int mbox_bounds[10] = {16, 30, 46, 60, 76, 90, 106, 120, 136, 0}; ///boundaries of slots in terms ob mbox counter rounded up to even numbers
int init_dlsch_threads(void);
void cleanup_dlsch_threads(void);
s32 init_rx_pdsch_thread(void);
void cleanup_rx_pdsch_thread(void);
int init_ulsch_threads(void);
void cleanup_ulsch_threads(void);
LTE_DL_FRAME_PARMS *frame_parms;
void setup_eNB_buffers(PHY_VARS_eNB *phy_vars_eNB,
LTE_DL_FRAME_PARMS *frame_parms, int carrier);
void signal_handler(int sig)
{
void *array[10];
size_t size;
if (sig==SIGSEGV) {
// get void*'s for all entries on the stack
size = backtrace(array, 10);
// print out all the frames to stderr
fprintf(stderr, "Error: signal %d:\n", sig);
backtrace_symbols_fd(array, size, 2);
exit(-1);
} else {
oai_exit=1;
}
}
void exit_fun(const char *s)
{
if (s != NULL) {
printf("Exiting: %s\n",s);
}
oai_exit=1;
#if defined(ENABLE_ITTI)
itti_terminate_tasks (TASK_UNKNOWN);
#endif
//rt_sleep_ns(FRAME_PERIOD);
//exit (-1);
}
#ifdef XFORMS
void *scope_thread(void *arg)
{
s16 prach_corr[1024], i;
char stats_buffer[16384];
//FILE *UE_stats, *eNB_stats;
int len=0;
/*
if (UE_flag==1)
UE_stats = fopen("UE_stats.txt", "w");
else
eNB_stats = fopen("eNB_stats.txt", "w");
*/
while (!oai_exit) {
len = dump_eNB_stats (PHY_vars_eNB_g[0], stats_buffer, 0);
fl_set_object_label(form_stats->stats_text, stats_buffer);
//rewind (eNB_stats);
//fwrite (stats_buffer, 1, len, eNB_stats);
for(UE_id=0; UE_id<scope_enb_num_ue; UE_id++) {
phy_scope_eNB(form_enb[UE_id],
PHY_vars_eNB_g[eNB_id],
UE_id);
}
//printf("doing forms\n");
usleep(100000); // 100 ms
}
//fclose (UE_stats);
//fclose (eNB_stats);
pthread_exit((void *)arg);
}
#endif
void do_OFDM_mod(mod_sym_t **txdataF, s32 **txdata, u16 next_slot,
LTE_DL_FRAME_PARMS *frame_parms)
{
int aa, slot_offset, slot_offset_F;
slot_offset_F = (next_slot)*(frame_parms->ofdm_symbol_size)*((
frame_parms->Ncp == EXTENDED) ? 6 : 7);
slot_offset = (next_slot)*(frame_parms->samples_per_tti>>1);
for (aa = 0; aa < frame_parms->nb_antennas_tx; aa++) {
if (frame_parms->Ncp == EXTENDED) {
PHY_ofdm_mod(&txdataF[aa][slot_offset_F],
&txdata[aa][slot_offset],
frame_parms->log2_symbol_size,
6,
frame_parms->nb_prefix_samples,
frame_parms->twiddle_fft,
frame_parms->rev,
CYCLIC_PREFIX);
} else {
normal_prefix_mod(&txdataF[aa][slot_offset_F],
&txdata[aa][slot_offset],
7,
frame_parms);
}
}
}
int dummy_tx_buffer[3840*4] __attribute__((aligned(16)));
#if defined(ENABLE_ITTI)
void *l2l1_task(void *arg)
{
MessageDef *message_p = NULL;
int result;
itti_set_task_real_time(TASK_L2L1);
itti_mark_task_ready(TASK_L2L1);
if (UE_flag == 0) {
/* Wait for the initialize message */
do {
if (message_p != NULL) {
result = itti_free (ITTI_MSG_ORIGIN_ID(message_p), message_p);
AssertFatal (result == EXIT_SUCCESS, "Failed to free memory (%d)!\n", result);
}
itti_receive_msg (TASK_L2L1, &message_p);
switch (ITTI_MSG_ID(message_p)) {
case INITIALIZE_MESSAGE:
/* Start eNB thread */
start_eNB = 1;
break;
case TERMINATE_MESSAGE:
oai_exit=1;
itti_exit_task ();
break;
default:
LOG_E(EMU, "Received unexpected message %s\n", ITTI_MSG_NAME(message_p));
break;
}
} while (ITTI_MSG_ID(message_p) != INITIALIZE_MESSAGE);
result = itti_free (ITTI_MSG_ORIGIN_ID(message_p), message_p);
AssertFatal (result == EXIT_SUCCESS, "Failed to free memory (%d)!\n", result);
}
do {
// Wait for a message
itti_receive_msg (TASK_L2L1, &message_p);
switch (ITTI_MSG_ID(message_p)) {
case TERMINATE_MESSAGE:
oai_exit=1;
itti_exit_task ();
break;
case MESSAGE_TEST:
LOG_I(EMU, "Received %s\n", ITTI_MSG_NAME(message_p));
break;
default:
LOG_E(EMU, "Received unexpected message %s\n", ITTI_MSG_NAME(message_p));
break;
}
result = itti_free (ITTI_MSG_ORIGIN_ID(message_p), message_p);
AssertFatal (result == EXIT_SUCCESS, "Failed to free memory (%d)!\n", result);
} while(1);
return NULL;
}
#endif
/* This is the main eNB thread. It gets woken up by the kernel driver using the RTAI message mechanism (rt_send and rt_receive). */
static void *eNB_thread(void *arg)
{
#ifdef RTAI
RT_TASK *task;
SEM *sem;
#endif
unsigned char last_slot, next_slot;
int subframe = 0, hw_subframe;
int frame=0;
int skip_first=1;
unsigned int msg1;
unsigned int aa,slot_offset, slot_offset_F;
int diff;
int delay_cnt;
RTIME time_in, time_diff;
RTIME period;
int mbox_target=0,mbox_current=0;
int i,ret;
int tx_offset;
#if defined(ENABLE_ITTI)
/* Wait for eNB application initialization to be complete (eNB registration to MME) */
{
char *indicator[] = {". ", ".. ", "...", " ..", " .", " "};
int i = 0;
while ((!oai_exit) && (start_eNB == 0)) {
LOG_D(HW,"Waiting for eNB application to be ready %s\r", indicator[i]);
i = (i + 1) % (sizeof(indicator) / sizeof(indicator[0]));
usleep(200000);
}
LOG_D(HW,"\n");
}
#endif
#ifdef RTAI
task = rt_task_init_schmod(nam2num("TASK0"), 0, 0, 0, SCHED_FIFO, 0xF);
rt_receive(0, (unsigned long *)((void *)&sem));
LOG_D(HW,"Started eNB thread (id %p)\n",task);
#endif
#ifdef HARD_RT
rt_make_hard_real_time();
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
timing_info.time_min = 100000000ULL;
timing_info.time_max = 0;
timing_info.time_avg = 0;
timing_info.n_samples = 0;
// sync to HW subframe == 0
mbox_current = ((volatile unsigned int *)DAQ_MBOX)[0];
rt_sleep_ns((165-mbox_current)*DAQ_PERIOD);
time_in = rt_get_time_ns();
while (!oai_exit) {
//this is the mbox counter where we should be
mbox_target = mbox_bounds[subframe];
//this is the mbox counter where we are
mbox_current = ((volatile unsigned int *)DAQ_MBOX)[0];
//this is the time we need to sleep in order to synchronize with the hw (in multiples of DAQ_PERIOD)
if ((mbox_current>=135) && (mbox_target<15)) { //handle the frame wrap-arround
diff = 150-mbox_current+mbox_target;
} else if ((mbox_current<15) && (mbox_target>=135)) {
diff = -150+mbox_target-mbox_current;
} else {
diff = mbox_target - mbox_current;
}
if (diff < -15) {
LOG_D(HW,
"Time %.3f: Frame %d, missed subframe, proceeding with next one (subframe %d, hw_subframe %d, mbox_currend %d, mbox_target %d,diff %d) processing time %.3f\n",
(float)(rt_get_time_ns()-time_in)/1e6,
frame, subframe, hw_subframe, mbox_current, mbox_target, diff,
(float)(timing_info.time_now-timing_info.time_last)/1e6);
subframe++;
if (frame>0) {
oai_exit=1;
}
if (subframe==10) {
subframe=0;
frame++;
}
continue;
}
if (diff > 15) {
LOG_D(HW,
"Time %.3f: Frame %d, skipped subframe, waiting for hw to catch up (subframe %d, hw_subframe %d, mbox_current %d, mbox_target %d, diff %d), processing time %.3f\n",
(float)(rt_get_time_ns()-time_in)/1e6,
frame, subframe, hw_subframe, mbox_current, mbox_target, diff,
(float)(timing_info.time_now-timing_info.time_last)/1e6);
//exit(-1);
}
delay_cnt = 0;
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_DAQ_MBOX,
*((volatile unsigned int *) openair0_exmimo_pci[card].rxcnt_ptr[0]));
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_DIFF, diff);
while ((diff>0) && (!oai_exit)) {
time_diff = rt_get_time_ns() - time_in;
ret = rt_sleep_ns(diff*DAQ_PERIOD);
if (ret) {
LOG_D(HW,"eNB Frame %d, time %llu: rt_sleep_ns returned %d\n",frame, time_in);
}
delay_cnt++;
if (delay_cnt == 10) {
oai_exit = 1;
LOG_D(HW,"eNB Frame %d: HW stopped ... \n",frame);
}
mbox_current = ((volatile unsigned int *)DAQ_MBOX)[0];
if ((mbox_current>=135) && (mbox_target<15)) { //handle the frame wrap-arround
diff = 150-mbox_current+mbox_target;
} else if ((mbox_current<15) && (mbox_target>=135)) {
diff = -150+mbox_target-mbox_current;
} else {
diff = mbox_target - mbox_current;
}
}
hw_subframe = ((((volatile unsigned int *)DAQ_MBOX)[0]+135)%150)/15;
LOG_D(HW,
"Time: %.3f: Frame %d, subframe %d, hw_subframe %d (mbox %d) processing time %0.3f\n",
(float)(rt_get_time_ns()-time_in)/1e6,
frame,subframe,hw_subframe,((volatile unsigned int *)DAQ_MBOX)[0],
(float)(timing_info.time_now-timing_info.time_last)/1e6);
last_slot = (subframe<<1)+1;
if (last_slot <0) {
last_slot+=20;
}
next_slot = ((subframe<<1)+4)%LTE_SLOTS_PER_FRAME;
if ((skip_first == 0) || (frame>5))
{
skip_first = 0;
timing_info.time_last = rt_get_time_ns();
//msg("subframe %d, last_slot %d,next_slot %d\n", subframe,last_slot,next_slot);
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_DAQ_MBOX,
*((volatile unsigned int *) openair0_exmimo_pci[card].rxcnt_ptr[0]));
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_DIFF, diff);
phy_procedures_eNB_lte (last_slot, next_slot, PHY_vars_eNB_g[0], 0,0,NULL);
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_DAQ_MBOX,
*((volatile unsigned int *) openair0_exmimo_pci[card].rxcnt_ptr[0]));
#ifndef IFFT_FPGA
if ((subframe_select(&PHY_vars_eNB_g[0]->lte_frame_parms,next_slot>>1)==SF_DL)||
((subframe_select(&PHY_vars_eNB_g[0]->lte_frame_parms,next_slot>>1)==SF_S)
&&((next_slot&1)==0))) {
//LOG_D(HW,"Frame %d: Generating slot %d\n",frame,next_slot);
/*
do_OFDM_mod(PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdataF[0],
PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0],
next_slot,
&PHY_vars_eNB_g[0]->lte_frame_parms);
do_OFDM_mod(PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdataF[0],
PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0],
next_slot+1,
&PHY_vars_eNB_g[0]->lte_frame_parms);
*/
vcd_signal_dumper_dump_function_by_name(
VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_ENB_SFGEN,1);
slot_offset_F = (next_slot)*
(PHY_vars_eNB_g[0]->lte_frame_parms.ofdm_symbol_size)*7;
slot_offset = (next_slot)*
(PHY_vars_eNB_g[0]->lte_frame_parms.samples_per_tti>>1);
normal_prefix_mod(
&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdataF[0][0][slot_offset_F],
dummy_tx_buffer,
7,
&(PHY_vars_eNB_g[0]->lte_frame_parms));
for (i = 0; i < PHY_vars_eNB_g[0]->lte_frame_parms.samples_per_tti/2; i++) {
tx_offset = slot_offset + time_offset[0] + i;
((short *)&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][0][tx_offset])[0]
= ((short *)dummy_tx_buffer)[2*i]<<4;
((short *)&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][0][tx_offset])[1]
= ((short *)dummy_tx_buffer)[2*i+1]<<4;
}
slot_offset_F = (next_slot+1)*
(PHY_vars_eNB_g[0]->lte_frame_parms.ofdm_symbol_size)*7;
slot_offset = (next_slot+1)*
(PHY_vars_eNB_g[0]->lte_frame_parms.samples_per_tti>>1);
normal_prefix_mod(
&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdataF[0][0][slot_offset_F],
dummy_tx_buffer,
7,
&(PHY_vars_eNB_g[0]->lte_frame_parms));
for (i = 0; i < PHY_vars_eNB_g[0]->lte_frame_parms.samples_per_tti/2; i++) {
tx_offset = slot_offset + i;
((short *)&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][0][tx_offset])[0]
= ((short *)dummy_tx_buffer)[2*i]<<4;
((short *)&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][0][tx_offset])[1]
= ((short *)dummy_tx_buffer)[2*i+1]<<4;
}
}
vcd_signal_dumper_dump_function_by_name(
VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_ENB_SFGEN,0);
timing_info.time_now = rt_get_time_ns();
#endif //IFFT_FPGA
/*
if (frame%100==0)
LOG_D(HW,"hw_slot %d (after): DAQ_MBOX %d\n",hw_slot,DAQ_MBOX[0]);
*/
}
/*
if ((slot%2000)<10)
LOG_D(HW,"fun0: doing very hard work\n");
*/
if (oai_flag == 2) {
//dump_ulsch(PHY_vars_eNB_g[0], subframe, 0);
//exit(-1);
oai_exit=1;
exit_fun("[HW][eNB] HW stopped");
}
if (oai_flag == 1) {
oai_flag = 2;
}
subframe++;
if (subframe==10) {
subframe=0;
frame++;
}
if(frame == 1024) {
frame = 0;
time_in = rt_get_time_ns();
}
#if defined(ENABLE_ITTI)
itti_update_lte_time(frame, subframe * 2);
#endif
}
LOG_D(HW,"eNB_thread: finished, ran %d times.\n",frame);
#ifdef HARD_RT
rt_make_soft_real_time();
#endif
// clean task
#ifdef RTAI
rt_sem_signal(mutex);
rt_task_delete(task);
#endif
LOG_D(HW,"Task deleted. returning\n");
return 0;
}
int main(int argc, char **argv)
{
const Enb_properties_array_t *enb_properties;
#ifdef RTAI
RT_TASK *task;
#endif
int i,j,aa;
void *status;
/*
u32 rf_mode_max[4] = {55759,55759,55759,55759};
u32 rf_mode_med[4] = {39375,39375,39375,39375};
u32 rf_mode_byp[4] = {22991,22991,22991,22991};
*/
u32 my_rf_mode = RXEN + TXEN + TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM +
RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM + DMAMODE_RX + DMAMODE_TX;
u32 rf_mode_base = TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN +
RXLPF25 + LNA1ON + /*LNAMax Antennas*/ LNAByp + RFBBNORM;
u32 rf_mode[4] = {my_rf_mode,0,0,0};
u32 rf_local[4] = {8255000,8255000,8255000,8255000}; // UE zepto
//{8254617, 8254617, 8254617, 8254617}; //eNB khalifa
//{8255067,8254810,8257340,8257340}; // eNB PETRONAS
u32 rf_vcocal[4] = {910,910,910,910};
u32 rf_vcocal_850[4] = {2015, 2015, 2015, 2015};
u32 rf_rxdc[4] = {32896,32896,32896,32896};
// Gain for antennas connection
//u32 rxgain[4] = {25,20,20,20};
//u32 txgain[4] = {30,25,25,25};
// Gain for Cable connection
u32 rxgain[4] = {20,20,20,20};
u32 txgain[4] = {25,25,25,25};
u8 frame_type = FDD;
u8 tdd_config = 3;
u8 tdd_config_S = 0;
u8 extended_prefix_flag = 0;
u16 Nid_cell = 0;
u8 N_RB_DL = 25;
u8 cooperation_flag = 0;
u8 transmission_mode = 1;
u8 abstraction_flag = 0;
u8 nb_antennas_rx = 1;
u8 beta_ACK=0,beta_RI=0,beta_CQI=2;
int c;
char do_forms=0;
unsigned int fd;
int amp;
unsigned int rxg_max[4]= {133,133,133,133}, rxg_med[4]= {127,127,127,127}, rxg_byp[4]= {120,120,120,120};
int tx_max_power=0;
int ret, ant;
int error_code;
char *itti_dump_file = NULL;
mode = normal_txrx;
mme_ip = "146.208.175.6";
while ((c = getopt(argc, argv, "dC:K:O:T:N:R:Vi;")) != -1) {
switch (c) {
case 'd':
do_forms=1;
printf("Starting XFORMS ...\n");
break;
case 'C':
carrier_freq[0] = atoi(optarg);
carrier_freq[1] = atoi(optarg);
carrier_freq[2] = atoi(optarg);
carrier_freq[3] = atoi(optarg);
break;
case 'T':
frame_type = TDD; // default FDD
tdd_config = atoi(optarg);
break;
case 'K':
#if defined(ENABLE_ITTI)
itti_dump_file = strdup(optarg);
#else
printf("-K option is disabled when ENABLE_ITTI is not defined\n");
#endif
break;
case 'O':
conf_config_file_name = optarg;
break;
case 'R':
N_RB_DL = atoi(optarg);
if ((N_RB_DL != 6) && (N_RB_DL != 15) && (N_RB_DL != 25) &&
(N_RB_DL != 50) && (N_RB_DL != 75) && (N_RB_DL != 100)) {
printf("Illegal N_RB_DL %d (should be one of 6,15,25,50,75,100)\n", N_RB_DL);
exit(-1);
}
break;
case 'i':
mme_ip = optarg;
break;
case 'V':
ouput_vcd = 1;
break;
default:
break;
}
}
NB_eNB_INST=1;
NB_INST=1;
if ((UE_flag == 0) && (conf_config_file_name != NULL)) {
int i;
/* Read eNB configuration file */
enb_properties = enb_config_init(conf_config_file_name);
AssertFatal (NB_eNB_INST <= enb_properties->number,
"Number of eNB is greater than eNB defined in configuration file %s (%d/%d)!",
conf_config_file_name, NB_eNB_INST, enb_properties->number);
/* Update some simulation parameters */
frame_type = enb_properties->properties[0]->frame_type;
for (i = 0 ; i < (sizeof(carrier_freq) / sizeof (carrier_freq[0])); i++) {
carrier_freq[i] = enb_properties->properties[0]->downlink_frequency;
}
}
set_taus_seed (0);
// initialize the log (see log.h for details)
logInit();
if (ouput_vcd) {
vcd_signal_dumper_init("/tmp/openair_dump_eNB.vcd");
}
#if defined(ENABLE_ITTI)
log_set_instance_type (LOG_INSTANCE_ENB);
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info,
messages_definition_xml, itti_dump_file);
#endif
#ifdef NAS_NETLINK
netlink_init();
#endif
#if !defined(ENABLE_ITTI)
// to make a graceful exit when ctrl-c is pressed
signal(SIGSEGV, signal_handler);
signal(SIGINT, signal_handler);
#endif
#ifndef RTAI
check_clock();
#endif
init_lte_vars(&frame_parms, frame_type, tdd_config, tdd_config_S,
extended_prefix_flag, N_RB_DL,
Nid_cell, cooperation_flag, transmission_mode, abstraction_flag,
nb_antennas_rx,0);
g_log->level = LOG_WARNING;
g_log->log_component[HW].level = LOG_WARNING;
g_log->log_component[HW].flag = LOG_LOW;
g_log->log_component[PHY].level = LOG_WARNING;
g_log->log_component[PHY].flag = LOG_LOW;
g_log->log_component[MAC].level = LOG_INFO;
g_log->log_component[MAC].flag = LOG_LOW;
g_log->log_component[RLC].level = LOG_WARNING;
g_log->log_component[RLC].flag = LOG_LOW;
g_log->log_component[PDCP].level = LOG_WARNING;
g_log->log_component[PDCP].flag = LOG_LOW;
g_log->log_component[RRC].level = LOG_INFO;
g_log->log_component[RRC].flag = LOG_LOW;
g_log->log_component[OIP].level = LOG_INFO;
g_log->log_component[OIP].flag = LOG_HIGH;
#if defined(ENABLE_ITTI)
g_log->log_component[EMU].level = LOG_INFO;
g_log->log_component[EMU].flag = LOG_HIGH;
# if defined(ENABLE_USE_MME)
g_log->log_component[S1AP].level = LOG_INFO;
g_log->log_component[S1AP].flag = LOG_HIGH;
g_log->log_component[SCTP].level = LOG_INFO;
g_log->log_component[SCTP].flag = LOG_HIGH;
# endif
g_log->log_component[S1AP].level = LOG_INFO;
g_log->log_component[S1AP].flag = LOG_LOW;
#else
#endif
g_log->log_component[ENB_APP].level = LOG_INFO;
g_log->log_component[ENB_APP].flag = LOG_HIGH;
PHY_vars_eNB_g = malloc(sizeof(PHY_VARS_eNB *));
PHY_vars_eNB_g[0] = init_lte_eNB(frame_parms,eNB_id,Nid_cell,cooperation_flag,
transmission_mode,abstraction_flag);
#ifndef OPENAIR2
for (i=0; i<NUMBER_OF_UE_MAX; i++) {
PHY_vars_eNB_g[0]->pusch_config_dedicated[i].betaOffset_ACK_Index = beta_ACK;
PHY_vars_eNB_g[0]->pusch_config_dedicated[i].betaOffset_RI_Index = beta_RI;
PHY_vars_eNB_g[0]->pusch_config_dedicated[i].betaOffset_CQI_Index = beta_CQI;
PHY_vars_eNB_g[0]->scheduling_request_config[i].sr_PUCCH_ResourceIndex = i;
PHY_vars_eNB_g[0]->scheduling_request_config[i].sr_ConfigIndex = 7+(i%3);
PHY_vars_eNB_g[0]->scheduling_request_config[i].dsr_TransMax = sr_n4;
}
#endif
openair_daq_vars.ue_dl_rb_alloc=0x1fff;
openair_daq_vars.target_ue_dl_mcs=16;
openair_daq_vars.ue_ul_nb_rb=6;
openair_daq_vars.target_ue_ul_mcs=9;
// set eNB to max gain
PHY_vars_eNB_g[0]->rx_total_gain_eNB_dB = rxg_max[0] + rxgain[0] -
30; //was measured at rxgain=30;
for (i=0; i<4; i++) {
// frame_parms->rfmode[i] = rf_mode_max[i];
rf_mode[i] = (rf_mode[i] & (~LNAGAINMASK)) | LNAMax;
}
// Initialize card
ret = openair0_open();
if ( ret != 0 ) {
if (ret == -1) {
printf("Error opening /dev/openair0\n");
}
if (ret == -2) {
printf("Error mapping bigshm\n");
}
if (ret == -3) {
printf("Error mapping RX or TX buffer\n");
}
return(ret);
}
printf ("Detected %d number of cards, %d number of antennas.\n",
openair0_num_detected_cards, openair0_num_antennas[card]);
p_exmimo_config = openair0_exmimo_pci[card].exmimo_config_ptr;
p_exmimo_id = openair0_exmimo_pci[card].exmimo_id_ptr;
printf("Card %d: ExpressMIMO %d, HW Rev %d, SW Rev 0x%d\n", card,
p_exmimo_id->board_exmimoversion, p_exmimo_id->board_hwrev,
p_exmimo_id->board_swrev);
if (p_exmimo_id->board_swrev>=BOARD_SWREV_CNTL2) {
p_exmimo_config->framing.eNB_flag = 0;
} else {
p_exmimo_config->framing.eNB_flag = 0; //!UE_flag;
}
p_exmimo_config->framing.tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_LSB;
for (ant = 0; ant < 4; ant++) {
p_exmimo_config->framing.resampling_factor[ant] = 2;
}
for (ant=0; ant<max(frame_parms->nb_antennas_tx,frame_parms->nb_antennas_rx);
ant++) {
p_exmimo_config->rf.rf_mode[ant] = rf_mode_base;
}
for (ant=0; ant<frame_parms->nb_antennas_tx; ant++) {
p_exmimo_config->rf.rf_mode[ant] += (TXEN + DMAMODE_TX);
}
for (ant=0; ant<frame_parms->nb_antennas_rx; ant++) {
p_exmimo_config->rf.rf_mode[ant] += (RXEN + DMAMODE_RX);
}
for (ant=max(frame_parms->nb_antennas_tx,frame_parms->nb_antennas_rx); ant<4;
ant++) {
p_exmimo_config->rf.rf_mode[ant] = 0;
carrier_freq[ant] = 0; //this turns off all other LIMEs
}
for (ant = 0; ant < 4; ant++) {
if (frame_type == FDD) {
carrier_freq[ant] = carrier_freq_fdd[ant];
} else {
carrier_freq[ant] = carrier_freq_tdd[ant];
}
}
for (ant = 0; ant<1; ant++) {
p_exmimo_config->rf.do_autocal[ant] = 1;
if (frame_type == FDD) {
p_exmimo_config->rf.rf_freq_rx[ant] =
carrier_freq[ant]-120e6; // LTE FDD band 1 duplex space
} else {
p_exmimo_config->rf.rf_freq_rx[ant] = carrier_freq[ant];
}
p_exmimo_config->rf.rf_freq_tx[ant] = carrier_freq[ant];
p_exmimo_config->rf.rx_gain[ant][0] = rxgain[ant];
p_exmimo_config->rf.tx_gain[ant][0] = txgain[ant];
p_exmimo_config->rf.rf_local[ant] = rf_local[ant];
p_exmimo_config->rf.rf_rxdc[ant] = rf_rxdc[ant];
if ((carrier_freq[ant] >= 850000000) && (carrier_freq[ant] <= 865000000)) {
p_exmimo_config->rf.rf_vcocal[ant] = rf_vcocal_850[ant];
p_exmimo_config->rf.rffe_band_mode[ant] = DD_TDD;
} else {
p_exmimo_config->rf.rf_vcocal[ant] = rf_vcocal[ant];
p_exmimo_config->rf.rffe_band_mode[ant] = B19G_TDD;
}
p_exmimo_config->rf.rffe_gain_txlow[ant] = 63;
p_exmimo_config->rf.rffe_gain_txhigh[ant] = 63;
p_exmimo_config->rf.rffe_gain_rxfinal[ant] = 63;
p_exmimo_config->rf.rffe_gain_rxlow[ant] = 63;
}
dump_frame_parms(frame_parms);
mac_xface = malloc(sizeof(MAC_xface));
#ifdef OPENAIR2
int eMBMS_active=0;
l2_init(frame_parms,eMBMS_active,
0,// cba_group_active
0); //HO active
mac_xface->mrbch_phy_sync_failure (0, 0, 0);
#endif
mac_xface->macphy_exit = &exit_fun;
#if defined(ENABLE_ITTI)
if (create_tasks(UE_flag ? 0 : 1, UE_flag ? 1 : 0) < 0) {
exit(-1); // need a softer mode
}
printf("ITTI tasks created\n");
#endif
number_of_cards = openair0_num_detected_cards;
if (p_exmimo_id->board_exmimoversion==1) { //ExpressMIMO1
openair_daq_vars.timing_advance = 138;
} else { //ExpressMIMO2
openair_daq_vars.timing_advance = 15;
}
setup_eNB_buffers(PHY_vars_eNB_g[0],frame_parms,0);
openair0_dump_config(card);
printf("EXMIMO_CONFIG: rf_mode 0x %x %x %x %x, [0]: TXRXEn %d, TXLPFEn %d, TXLPF %d, RXLPFEn %d, RXLPF %d, RFBB %d, LNA %d, LNAGain %d, RXLPFMode %d, SWITCH %d, rf_rxdc %d, rf_local %d, rf_vcocal %d\n",
p_exmimo_config->rf.rf_mode[0],
p_exmimo_config->rf.rf_mode[1],
p_exmimo_config->rf.rf_mode[2],
p_exmimo_config->rf.rf_mode[3],
(p_exmimo_config->rf.rf_mode[0]&3), // RXen+TXen
(p_exmimo_config->rf.rf_mode[0]&4)>>2, //TXLPFen
(p_exmimo_config->rf.rf_mode[0]&TXLPFMASK)>>3, //TXLPF
(p_exmimo_config->rf.rf_mode[0]&128)>>7, //RXLPFen
(p_exmimo_config->rf.rf_mode[0]&RXLPFMASK)>>8, //TXLPF
(p_exmimo_config->rf.rf_mode[0]&RFBBMASK)>>16, // RFBB mode
(p_exmimo_config->rf.rf_mode[0]&LNAMASK)>>12, // RFBB mode
(p_exmimo_config->rf.rf_mode[0]&LNAGAINMASK)>>14, // RFBB mode
(p_exmimo_config->rf.rf_mode[0]&RXLPFMODEMASK)>>19, // RXLPF mode
(p_exmimo_config->framing.tdd_config&TXRXSWITCH_MASK)>>1, // Switch mode
p_exmimo_config->rf.rf_rxdc[0],
p_exmimo_config->rf.rf_local[0],
p_exmimo_config->rf.rf_vcocal[0]);
for (ant=0; ant<4; ant++) {
p_exmimo_config->rf.do_autocal[ant] = 0;
}
mlockall(MCL_CURRENT | MCL_FUTURE);
#ifdef RTAI
// make main thread LXRT soft realtime
task = rt_task_init_schmod(nam2num("MYTASK"), 9, 0, 0, SCHED_FIFO, 0xF);
// start realtime timer and scheduler
//rt_set_oneshot_mode();
rt_set_periodic_mode();
start_rt_timer(0);
//now = rt_get_time() + 10*PERIOD;
//rt_task_make_periodic(task, now, PERIOD);
printf("Init mutex\n");
//mutex = rt_get_adr(nam2num("MUTEX"));
mutex = rt_sem_init(nam2num("MUTEX"), 0);
if (mutex==0) {
printf("Error init mutex\n");
exit(-1);
} else {
printf("mutex=%p\n",mutex);
}
#endif
DAQ_MBOX = (volatile unsigned int *) openair0_exmimo_pci[card].rxcnt_ptr[0];
// this starts the DMA transfers
openair0_start_rt_acquisition(card);
#ifdef XFORMS
if (do_forms==1) {
printf("Running XFORMS\n");
fl_initialize (&argc, argv, NULL, 0, 0);
form_stats = create_form_stats_form();
for(UE_id=0; UE_id<scope_enb_num_ue; UE_id++) {
form_enb[UE_id] = create_lte_phy_scope_enb();
sprintf (title, "UE%d LTE UL SCOPE eNB",UE_id+1);
fl_show_form (form_enb[UE_id]->lte_phy_scope_enb, FL_PLACE_HOTSPOT,
FL_FULLBORDER, title);
}
fl_show_form (form_stats->stats_form, FL_PLACE_HOTSPOT, FL_FULLBORDER, "stats");
for (UE_id=0; UE_id<scope_enb_num_ue; UE_id++) {
if (otg_enabled) {
fl_set_button(form_enb[UE_id]->button_0,1);
fl_set_object_label(form_enb[UE_id]->button_0,"DL Traffic ON");
} else {
fl_set_button(form_enb[UE_id]->button_0,0);
fl_set_object_label(form_enb[UE_id]->button_0,"DL Traffic OFF");
}
}
ret = pthread_create(&thread2, NULL, scope_thread, NULL);
printf("Scope thread created, ret=%d\n",ret);
}
#endif
rt_sleep_ns(10*FRAME_PERIOD);
#ifndef RTAI
pthread_attr_init (&attr_dlsch_threads);
pthread_attr_setstacksize(&attr_dlsch_threads,OPENAIR_THREAD_STACK_SIZE);
//attr_dlsch_threads.priority = 1;
sched_param_dlsch.sched_priority = sched_get_priority_max(
SCHED_FIFO); //OPENAIR_THREAD_PRIORITY;
pthread_attr_setschedparam (&attr_dlsch_threads, &sched_param_dlsch);
pthread_attr_setschedpolicy (&attr_dlsch_threads, SCHED_FIFO);
#endif
// start the main thread
#ifdef RTAI
thread0 = rt_thread_create(eNB_thread, NULL, 10000000);
rt_sleep_ns(FRAME_PERIOD*10);
rt_send(rt_get_adr(nam2num("TASK0")), (unsigned long)mutex);
#else
error_code = pthread_create(&thread0, &attr_dlsch_threads, eNB_thread, NULL);
if (error_code!= 0) {
LOG_D(HW,"[lte-softmodem.c] Could not allocate eNB_thread, error %d\n",
error_code);
return(error_code);
} else {
LOG_D(HW,"[lte-softmodem.c] Allocate eNB_thread successful\n");
}
#endif
// #ifdef OPENAIR2
// init_pdcp_thread(1);
// #endif
#ifdef ULSCH_THREAD
init_ulsch_threads();
#endif
printf("eNB threads created\n");
// wait for end of program
printf("TYPE <CTRL-C> TO TERMINATE\n");
//getchar();
//while (oai_exit==0)
// rt_sleep_ns(FRAME_PERIOD);
#if defined(ENABLE_ITTI)
printf("Entering ITTI signals handler\n");
itti_wait_tasks_end();
#else
rt_sem_wait(mutex);
#endif
// stop threads
#ifdef XFORMS
printf("waiting for XFORMS thread\n");
if (do_forms==1) {
pthread_join(thread2,&status);
fl_hide_form(form_stats->stats_form);
fl_free_form(form_stats->stats_form);
for(UE_id=0; UE_id<scope_enb_num_ue; UE_id++) {
fl_hide_form(form_enb[UE_id]->lte_phy_scope_enb);
fl_free_form(form_enb[UE_id]->lte_phy_scope_enb);
}
}
#endif
printf("stopping MODEM threads\n");
// cleanup
#ifdef RTAI
rt_thread_join(thread0);
#else
pthread_join(thread0,&status);
#endif
#ifdef ULSCH_THREAD
cleanup_ulsch_threads();
#endif
#ifdef RTAI
rt_sem_delete(mutex);
stop_rt_timer();
rt_task_delete(task);
#endif
printf("stopping card\n");
openair0_stop(card);
printf("closing openair0_lib\n");
openair0_close();
if (ouput_vcd) {
vcd_signal_dumper_close();
}
logClean();
return 0;
}
void setup_eNB_buffers(PHY_VARS_eNB *phy_vars_eNB,
LTE_DL_FRAME_PARMS *frame_parms, int carrier)
{
int i,j;
u16 N_TA_offset = 0;
if (frame_parms->frame_type == TDD) {
N_TA_offset = 624/4;
}
if (phy_vars_eNB) {
if ((frame_parms->nb_antennas_rx>1) && (carrier>0)) {
printf("RX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
if ((frame_parms->nb_antennas_tx>1) && (carrier>0)) {
printf("TX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
// replace RX signal buffers with mmaped HW versions
for (i=0; i<frame_parms->nb_antennas_rx; i++) {
free(phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i]);
phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i] = ((s32 *)
openair0_exmimo_pci[card].adc_head[i+carrier]) -
N_TA_offset; // N_TA offset for TDD
/*
printf("rxdata[%d] @ %p\n",i,phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i]);
for (j=0;j<16;j++) {
printf("rxbuffer %d: %x\n",j,phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i][j]);
phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i][j] = 16-j;
}
*/
}
for (i=0; i<frame_parms->nb_antennas_tx; i++) {
free(phy_vars_eNB->lte_eNB_common_vars.txdata[0][i]);
phy_vars_eNB->lte_eNB_common_vars.txdata[0][i] = (s32 *)
openair0_exmimo_pci[card].dac_head[i+carrier];
/*
printf("txdata[%d] @ %p\n",i,phy_vars_eNB->lte_eNB_common_vars.txdata[0][i]);
for (j=0;j<16;j++) {
printf("txbuffer %d: %x\n",j,phy_vars_eNB->lte_eNB_common_vars.txdata[0][i][j]);
phy_vars_eNB->lte_eNB_common_vars.txdata[0][i][j] = 16-j;
}
*/
}
}
}
targets/RTAI/USER/lte-softmodem-usrp.c deleted 100644 → 0
View file @ 337df938
/*******************************************************************************
Eurecom OpenAirInterface
Copyright(c) 1999 - 2011 Eurecom
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information
Openair Admin: openair_admin@eurecom.fr
Openair Tech : openair_tech@eurecom.fr
Forums : http://forums.eurecom.fsr/openairinterface
Address : Eurecom, 2229, route des crêtes, 06560 Valbonne Sophia Antipolis, France
*******************************************************************************/
/*! \file lte-softmodem.c
* \brief main program to control HW and scheduling
* \author R. Knopp, F. Kaltenberger
* \date 2012
* \version 0.1
* \company Eurecom
* \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr
* \note
* \warning
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <fcntl.h>
#define __USE_GNU
//#define _GNU_SOURCE
#include <sched.h>
#include <signal.h>
#include <execinfo.h>
#include <getopt.h>
//#include <windows.h>
#include <errno.h>
#include "rt_wrapper.h"
#ifdef EMOS
#include <gps.h>
#endif
#include "PHY/types.h"
#include "PHY/defs.h"
#include "openair0_lib.h"
#include "PHY/vars.h"
#include "MAC_INTERFACE/vars.h"
#include "SCHED/vars.h"
#include "LAYER2/MAC/vars.h"
#include "../../SIMU/USER/init_lte.h"
#ifdef EMOS
#include "SCHED/phy_procedures_emos.h"
#endif
#ifdef OPENAIR2
#include "LAYER2/MAC/defs.h"
#include "LAYER2/MAC/vars.h"
#ifndef CELLULAR
#include "RRC/LITE/vars.h"
#endif
#include "PHY_INTERFACE/vars.h"
#endif
#ifdef SMBV
#include "PHY/TOOLS/smbv.h"
unsigned short config_frames[4] = {2,9,11,13};
#endif
#include "UTIL/LOG/log_extern.h"
#include "UTIL/OTG/otg.h"
#include "UTIL/OTG/otg_vars.h"
#include "UTIL/MATH/oml.h"
#include "UTIL/LOG/vcd_signal_dumper.h"
#include "stats.h"
#include "../../ARCH/USRP/USERSPACE/LIB/def.h"
#include "TOOLS/thread_ipc.c"
#ifdef XFORMS
#include "PHY/TOOLS/lte_phy_scope.h"
// current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
// at eNB 0, an UL scope for every UE
FD_lte_phy_scope_ue *form_ue[NUMBER_OF_UE_MAX];
FD_lte_phy_scope_enb *form_enb[NUMBER_OF_UE_MAX];
FD_stats_form *form_stats=NULL;
char title[255];
unsigned char scope_enb_num_ue = 1;
#endif //XFORMS
#define FRAME_PERIOD 100000000ULL
#define DAQ_PERIOD 66667ULL
//#define rt_printk printf
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
#ifdef RTAI //by super
static SEM *mutex;
//static CND *cond;
static int thread0;
static int thread1;
static int thread_recv;
//static int sync_thread;
#else
pthread_t thread0;
pthread_t thread1;
pthread_t thread_recv;
pthread_attr_t attr_dlsch_threads;
struct sched_param sched_param_dlsch;
#endif
pthread_t thread2;
pthread_t thread3;
pthread_t tid_eNB;
pthread_t tid_recv;
pthread_t thread_tx_error;
pthread_attr_t attr;
pthread_mutex_t mutex_eNB;
pthread_cond_t cond_eNB;
int ret;
// ------------------------------------
// functions and variables for USRP
// ------------------------------------
extern int oai_tx_buff[SAMPLES_PER_FRM];
extern int oai_rx_buff[SAMPLES_PER_FRM];
extern void UHD_init(void);
extern void UHD_init_display(void);
extern void Init_send(void);
extern void Init_recv(void);
extern void set_freq(int freq_offset);
extern void send_data(int hw_frm_head_pos);
extern void recv_data(int hw_frm_head_pos);
extern void send_end();
extern void tx_errorcode_handler(void);
int tx_offset = 0;
int hw_frm_head_pos = 0;
extern volatile unsigned long long tx_timestamp,rx_timestamp,clock_usrp;
extern volatile int flag_recv,flag_clock;
extern volatile int recv_ready;
extern volatile int w_pos_usrp_rcv; // value range [0:76800-1]
extern volatile int w_slot_usrp_rcv, r_slot_usrp_send; // slot index for USRP thread. value range [0:19]
extern volatile int r_slot_idx, t_slot_idx; // slot index for eNB thread. value range [0;19]
extern volatile int send_slot_missed;
double time_diff1,time_diff2,time_diff3,time_diff4;
struct timespec time_1, time_2,time_3,time_4,time_5;
// USRP debug output control
extern int g_usrp_debug;
//add for program run limit times
int N_slot_cycle;
// -----------------------------------
// Ctrl+c control
// -----------------------------------
int oai_exit = 0;
void sig_int_handler(void);
int card = 0;
exmimo_config_t *p_exmimo_config;
exmimo_id_t *p_exmimo_id;
volatile unsigned int *DAQ_MBOX;
//int time_offset[4] = {-138,-138,-138,-138};
//int time_offset[4] = {-145,-145,-145,-145};
int time_offset[4] = {0,0,0,0};
int fs4_test=0;
char UE_flag;
u8 eNB_id=0,UE_id=0;
u32 carrier_freq[4]= {1907600000,1907600000,1907600000,1907600000};
struct timing_info_t {
//unsigned int frame, hw_slot, last_slot, next_slot;
RTIME time_min, time_max, time_avg, time_last, time_now;
//unsigned int mbox0, mbox1, mbox2, mbox_target;
unsigned int n_samples;
} timing_info;
extern s16* sync_corr_ue0;
extern s16 prach_ifft[4][1024*2];
runmode_t mode;
int rx_input_level_dBm;
#ifdef XFORMS
extern int otg_enabled;
#else
int otg_enabled;
#endif
int number_of_cards = 1;
int mbox_bounds[20] = {8,16,24,30,38,46,54,60,68,76,84,90,98,106,114,120,128,136,144, 0}; ///boundaries of slots in terms ob mbox counter rounded up to even numbers
int init_dlsch_threads(void);
void cleanup_dlsch_threads(void);
s32 init_rx_pdsch_thread(void);
void cleanup_rx_pdsch_thread(void);
int init_ulsch_threads(void);
void cleanup_ulsch_threads(void);
LTE_DL_FRAME_PARMS *frame_parms;
void setup_ue_buffers(PHY_VARS_UE *phy_vars_ue, LTE_DL_FRAME_PARMS *frame_parms, int carrier);
void setup_eNB_buffers(PHY_VARS_eNB *phy_vars_eNB, LTE_DL_FRAME_PARMS *frame_parms, int carrier);
void test_config(int card, int ant, unsigned int rf_mode, int UE_flag);
unsigned int build_rflocal(txi, txq, rxi, rxq)
{
return (txi + (txq<<6) + (rxi<<12) + (rxq<<18));
}
unsigned int build_rfdc(int dcoff_i_rxfe, int dcoff_q_rxfe)
{
return (dcoff_i_rxfe + (dcoff_q_rxfe<<8));
}
void signal_handler(int sig)
{
void *array[10];
size_t size;
if (sig==SIGSEGV) {
// get void*'s for all entries on the stack
size = backtrace(array, 10);
// print out all the frames to stderr
fprintf(stderr, "Error: signal %d:\n", sig);
backtrace_symbols_fd(array, size, 2);
exit(-1);
}
else {
oai_exit=1;
}
}
void exit_fun(const char* s)
{
void *array[10];
size_t size;
printf("Exiting: %s\n",s);
oai_exit=1;
//rt_sleep_ns(FRAME_PERIOD);
//exit (-1);
}
int dummy_tx_buffer[3840*4] __attribute__((aligned(16)));
void sig_int_handler(void)
{
oai_exit = 1;
}
// -----------------------------------
// USRP tx underflow test
// -----------------------------------
// FIXME HL_CHECK is this thread necessary?
void *tx_error_handler(void *ptr)
{
(void)ptr;
while (!oai_exit)
{
tx_errorcode_handler();
}
printf("[USRP monitoring thread] Received oai_exit signal. Ends.\n");
pthread_exit(NULL);
}
// -----------------------------------
// USRP send and receive thread
// -----------------------------------
void *usrp_thread(void *ptr)
{
(void)ptr;
bind_thread2kernel(1);
int i=0;
// continuous receiving
while (!oai_exit)
{
// receive one slot-len
recv_data(hw_frm_head_pos);
// send one slot
send_data(hw_frm_head_pos);
i++; if(i==N_slot_cycle) oai_exit=1;//control run N_slot_cycle slot and exit
}
send_end();
printf("[USRP thread] Received oai_exit signal. Ends. send slot missed: %d\n",send_slot_missed);
pthread_exit(NULL);
}
/* This is the main eNB thread. It gets woken up by the kernel driver using the RTAI message mechanism (rt_send and rt_receive). */
static void *eNB_thread(void *arg)
//void eNB_thread(void)
{
printf("Start eNB Server...\n\n");
bind_thread2kernel(2);
#ifdef RTAI
RT_TASK *task;
#endif
int slot=0,last_slot, next_slot,frame=0;
unsigned int aa,slot_offset, slot_offset_F;
int diff = 0;
int i;
int num_slot_missed = 0;
#ifdef RTAI
task = rt_task_init_schmod(nam2num("TASK0"), 0, 0, 0, SCHED_FIFO, 0xF);
LOG_D(HW,"Started eNB thread (id %p)\n",task);
//if(task==NULL) printf("RT Task creation failed\n"); else printf("Task success!\n");
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
#ifdef HARD_RT
rt_make_hard_real_time();
#endif
// initialize reading postition
r_slot_idx = 0;
t_slot_idx = 0;
frame = 0;
while (!oai_exit)
{
format_printf(g_usrp_debug,"[eNB ] r_eNB: %d w_usrp: %d num_slot_missed: %d diff: %d\n",r_slot_idx,w_slot_usrp_rcv, num_slot_missed,diff);
// Update 'diff'. Handle the frame wrap-arround
if ((w_slot_usrp_rcv<4)&&(r_slot_idx>=16)){
diff = r_slot_idx - (w_slot_usrp_rcv + 20) ;
}
else if((w_slot_usrp_rcv>=16)&&(r_slot_idx<4)){
diff = (r_slot_idx + 20) - w_slot_usrp_rcv;
}
else{
diff = r_slot_idx - w_slot_usrp_rcv;
}
// Reading is too slow. It's already late.
if(diff < -4)
{
r_slot_idx++;
num_slot_missed += abs(diff + 4);
if(r_slot_idx==20){
r_slot_idx = 0;
frame++;
}
continue;
}
// Wait for writing
while((diff > 0)&& (!oai_exit))
{
usleep(500);
// Update 'diff'. Handle the frame wrap-arround
if ((w_slot_usrp_rcv<4)&&(r_slot_idx>=16)){
diff = r_slot_idx - (w_slot_usrp_rcv + 20) ;
}
else if((w_slot_usrp_rcv>=16)&&(r_slot_idx<4)){
diff = (r_slot_idx + 20) - w_slot_usrp_rcv;
}
else{
diff = r_slot_idx - w_slot_usrp_rcv;
}
}
// The slot is ready
last_slot = r_slot_idx;
next_slot = (r_slot_idx + N_slot_offset)%LTE_SLOTS_PER_FRAME;
format_printf(g_usrp_debug, "[eNB ] r_eNB: %d w_usrp: %d last_slot: %d next_slot: %d diff: %d\n\n",r_slot_idx,w_slot_usrp_rcv,last_slot, next_slot,diff);
//---------------------------
// eNB procedure
//---------------------------
PHY_vars_eNB_g[0]->frame = frame;
//if (frame>5)
{
if (fs4_test==0)
// -- PHY procedure --
{
//phy_procedures_eNB_lte(last_slot, next_slot, PHY_vars_eNB_g[0], 0);//for OAI version berfore 4160
phy_procedures_eNB_lte(last_slot, next_slot, PHY_vars_eNB_g[0], 0,0,NULL);
#ifndef IFFT_FPGA
slot_offset_F = (next_slot)*
(PHY_vars_eNB_g[0]->lte_frame_parms.ofdm_symbol_size)*
((PHY_vars_eNB_g[0]->lte_frame_parms.Ncp==1) ? 6 : 7);//0for normal 7,1 for extened 6
slot_offset = (next_slot)*
(PHY_vars_eNB_g[0]->lte_frame_parms.samples_per_tti>>1);
if ((subframe_select(&PHY_vars_eNB_g[0]->lte_frame_parms,next_slot>>1)==SF_DL)||
((subframe_select(&PHY_vars_eNB_g[0]->lte_frame_parms,next_slot>>1)==SF_S)&&((next_slot&1)==0)))
{
for (aa=0; aa<PHY_vars_eNB_g[0]->lte_frame_parms.nb_antennas_tx; aa++)
{
if (PHY_vars_eNB_g[0]->lte_frame_parms.Ncp == 1)
{
PHY_ofdm_mod(&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdataF[0][aa][slot_offset_F],
#ifdef BIT8_TX
&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa][slot_offset>>1],
#else
dummy_tx_buffer,//&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa][slot_offset],
#endif
PHY_vars_eNB_g[0]->lte_frame_parms.log2_symbol_size,
6,
PHY_vars_eNB_g[0]->lte_frame_parms.nb_prefix_samples,
PHY_vars_eNB_g[0]->lte_frame_parms.twiddle_ifft,
PHY_vars_eNB_g[0]->lte_frame_parms.rev,
CYCLIC_PREFIX);
}
else
{
normal_prefix_mod(&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdataF[0][aa][slot_offset_F],
#ifdef BIT8_TX
&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa][slot_offset>>1],
#else
dummy_tx_buffer,//&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa][slot_offset],
#endif
7,
&(PHY_vars_eNB_g[0]->lte_frame_parms));
}
#ifdef EXMIMO
for (i=0; i<PHY_vars_eNB_g[0]->lte_frame_parms.samples_per_tti/2; i++)
{
tx_offset = (int)slot_offset+time_offset[aa]+i;
if (tx_offset<0)
tx_offset += LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*PHY_vars_eNB_g[0]->lte_frame_parms.samples_per_tti;
if (tx_offset>=(LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*PHY_vars_eNB_g[0]->lte_frame_parms.samples_per_tti))
tx_offset -= LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*PHY_vars_eNB_g[0]->lte_frame_parms.samples_per_tti;
((short*)&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa][tx_offset])[0]=
((short*)dummy_tx_buffer)[2*i]<<4;
((short*)&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa][tx_offset])[1]=
((short*)dummy_tx_buffer)[2*i+1]<<4;
}
#endif //EXMIMO
}
}
}// end of PHY procedure
#endif //IFFT_FPGA
}// end of frame>5
// update slot index
t_slot_idx = next_slot; // this slot is ready to send
r_slot_idx++;
if(r_slot_idx==20)
{
r_slot_idx = 0;
frame++;
}
}// end of while
format_printf(1,"\n[eNB thread] Received oai_exit signal. Ends. Ran %d frames. num_slot_missed: %d\n",frame, num_slot_missed);
#ifdef HARD_RT
rt_make_soft_real_time();
#endif
// clean task
#ifdef RTAI
rt_task_delete(task);
#endif
return 0;
}
/* This is the main UE thread. Initially it is doing a periodic get_frame. One synchronized it gets woken up by the kernel driver using the RTAI message mechanism (rt_send and rt_receive). */
static void *UE_thread(void *arg)
{
printf("Start UE Client...\n\n");
bind_thread2kernel(2);
#ifdef RTAI
RT_TASK *task;
#endif
int slot=0,last_slot, next_slot,frame=0;
unsigned int aa,slot_offset, slot_offset_F;
int diff = 0;
int i;
int num_slot_missed = 0;
static int is_synchronized = 0;
static int received_slots = 0;
static int slot0 = 0;
static int first_run=1;
#ifdef RTAI
task = rt_task_init_schmod(nam2num("TASK0"), 0, 0, 0, SCHED_FIFO, 0xF);
LOG_D(HW,"Started UE thread (id %p)\n",task);
//if(task==NULL) printf("RT Task creation failed\n"); else printf("Task success!\n");
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
#ifdef HARD_RT
rt_make_hard_real_time();
#endif
// initialize reading postition
r_slot_idx = 0;
t_slot_idx = 0;
frame = 0;
openair_daq_vars.freq_offset = 0; //-7500;
set_freq(openair_daq_vars.freq_offset);
if (mode == rx_calib_ue) {
openair_daq_vars.freq_offset = -7500;
set_freq(openair_daq_vars.freq_offset);
}
usleep(10000*(7.68/6.25));//wait frame data fill in buff
//test synchronized or not
char test_synchronize = 1;
while (!oai_exit)
{
if (is_synchronized)
{
//test is synchronized or not
if(test_synchronize) {printf("Found cell ,UE synchronized! hw_frm_head_pos = %d\n",hw_frm_head_pos); test_synchronize = 0;}
format_printf(g_usrp_debug,"[UE ] r_ue: %d w_usrp: %d num_slot_missed: %d diff: %d\n",r_slot_idx,w_slot_usrp_rcv, num_slot_missed,diff);
// Update 'diff'. Handle the frame wrap-arround
if ((w_slot_usrp_rcv<4)&&(r_slot_idx>=16)){
diff = r_slot_idx - (w_slot_usrp_rcv + 20) ;
}
else if((w_slot_usrp_rcv>=16)&&(r_slot_idx<4)){
diff = (r_slot_idx + 20) - w_slot_usrp_rcv;
}
else{
diff = r_slot_idx - w_slot_usrp_rcv;
}
// Reading is too slow. It's already late.
if(diff < -4)
{
r_slot_idx++;
num_slot_missed += abs(diff + 4);
if(r_slot_idx==20){
r_slot_idx = 0;
frame++;
}
continue;
}
// Wait for writing
while((diff > 0)&& (!oai_exit))
{
usleep(500);
// Update 'diff'. Handle the frame wrap-arround
if ((w_slot_usrp_rcv<4)&&(r_slot_idx>=16)){
diff = r_slot_idx - (w_slot_usrp_rcv + 20) ;
}
else if((w_slot_usrp_rcv>=16)&&(r_slot_idx<4)){
diff = (r_slot_idx + 20) - w_slot_usrp_rcv;
}
else{
diff = r_slot_idx - w_slot_usrp_rcv;
}
}
// The slot is ready
last_slot = r_slot_idx;
next_slot = (r_slot_idx + N_slot_offset)%LTE_SLOTS_PER_FRAME;
format_printf(g_usrp_debug, "[UE ] r_ue: %d w_usrp: %d last_slot: %d next_slot: %d diff: %d\n\n",r_slot_idx,w_slot_usrp_rcv,last_slot, next_slot,diff);
PHY_vars_UE_g[0]->frame = frame;
//phy_procedures_UE_lte (last_slot, next_slot, PHY_vars_UE_g[0], 0, 0,mode);//for OAI version after 4160
phy_procedures_UE_lte (last_slot, next_slot, PHY_vars_UE_g[0], 0, 0,mode,0,NULL);
// update slot index
t_slot_idx = next_slot; // this slot is ready to send
r_slot_idx++;
if(r_slot_idx==20)
{
r_slot_idx = 0;
frame++;
}
}
else // we are not yet synchronized
{
hw_frm_head_pos = 0;
slot = 0;
if (initial_sync(PHY_vars_UE_g[0],mode)==0) { // acquired synchronization
if (mode == rx_calib_ue) {
oai_exit=1;
}
else {
is_synchronized = 1;
hw_frm_head_pos = PHY_vars_UE_g[0]->rx_offset;
LOG_D(HW,"Got synch: hw_frm_head_pos %d\n",hw_frm_head_pos);
}
}
else { // Not acquired synchronization. Adjust carrier frequency.
if (openair_daq_vars.freq_offset >= 0) {
openair_daq_vars.freq_offset += 100; // FIXME HL_CHECK why add 100Hz here
openair_daq_vars.freq_offset *= -1;
}
else {
openair_daq_vars.freq_offset *= -1;
}
if (abs(openair_daq_vars.freq_offset) > 7500) { // cannot handle the frequency offset larger than 7.5KHz
LOG_I(PHY,"[initial_sync] No cell synchronization found, abondoning\n");
mac_xface->macphy_exit("");
oai_exit = 1;
}
else {
LOG_I(PHY,"[initial_sync] trying carrier off %d Hz\n",openair_daq_vars.freq_offset);
set_freq(openair_daq_vars.freq_offset);
}
}
}
}
LOG_D(HW,"UE_thread: finished, ran %d times.\n",frame);
format_printf(1,"\n[UE thread] Received oai_exit signal. Ends. Ran %d frames. num_slot_missed: %d\n",frame, num_slot_missed);
#ifdef HARD_RT
rt_make_soft_real_time();
#endif
// clean task
#ifdef RTAI
rt_task_delete(task);
#endif
LOG_D(HW,"Task deleted. returning\n");
return 0;
}
int main(int argc, char **argv)
{
#ifdef RTAI
RT_TASK *task;
#endif
int i,j,aa;
void *status;
/*
u32 rf_mode_max[4] = {55759,55759,55759,55759};
u32 rf_mode_med[4] = {39375,39375,39375,39375};
u32 rf_mode_byp[4] = {22991,22991,22991,22991};
*/
u32 my_rf_mode = RXEN + TXEN + TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM + DMAMODE_RX + DMAMODE_TX;
u32 my_rf_mode2 = RXEN + TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM + DMAMODE_RX;
u32 rf_mode[4] = {my_rf_mode,my_rf_mode2,0,0};
u32 rf_local[4] = {8255000,8255000,8255000,8255000}; // UE zepto
//{8254617, 8254617, 8254617, 8254617}; //eNB khalifa
//{8255067,8254810,8257340,8257340}; // eNB PETRONAS
u32 rf_vcocal[4] = {910,910,910,910};
u32 rf_vcocal_850[4] = {2015, 2015, 2015, 2015};
u32 rf_rxdc[4] = {32896,32896,32896,32896};
u32 rxgain[4] = {20,20,20,20};
u32 txgain[4] = {25,25,25,25};
u16 Nid_cell = 0;
u8 cooperation_flag=0, transmission_mode=1, abstraction_flag=0;
u8 beta_ACK=0,beta_RI=0,beta_CQI=2;
int c;
char do_forms=0;
unsigned int fd;
unsigned int tcxo = 114;
int amp;
u8 prach_fmt;
int N_ZC;
char rxg_fname[100];
char txg_fname[100];
char rflo_fname[100];
char rfdc_fname[100];
FILE *rxg_fd=NULL;
FILE *txg_fd=NULL;
FILE *rflo_fd=NULL;
FILE *rfdc_fd=NULL;
unsigned int rxg_max[4]={133,133,133,133}, rxg_med[4]={127,127,127,127}, rxg_byp[4]={120,120,120,120};
int tx_max_power=0;
char line[1000];
int l;
int ret, ant;
int error_code;
const struct option long_options[] = {
{"calib-ue-rx", required_argument, NULL, 256},
{"calib-ue-rx-med", required_argument, NULL, 257},
{"calib-ue-rx-byp", required_argument, NULL, 258},
{"debug-ue-prach", no_argument, NULL, 259},
{"no-L2-connect", no_argument, NULL, 260},
{NULL, 0, NULL, 0}};
mode = normal_txrx;
while ((c = getopt_long (argc, argv, "C:ST:UdF:V:Dn:",long_options,NULL)) != -1)
{
switch (c)
{
case 'D':
printf("Enable debug output. \n\n");
g_usrp_debug = 1;
break;
case 'V':
ouput_vcd = 1;
break;
case 'd':
do_forms=1;
break;
case 'U':
UE_flag = 1;
break;
case 'C':
carrier_freq[0] = atoi(optarg);
carrier_freq[1] = atoi(optarg);
carrier_freq[2] = atoi(optarg);
carrier_freq[3] = atoi(optarg);
break;
case 'S':
fs4_test=1;
break;
case 'T':
tcxo=atoi(optarg);
break;
case 'n':
N_slot_cycle=atoi(optarg);
break;
case 'F':
sprintf(rxg_fname,"%srxg.lime",optarg);
rxg_fd = fopen(rxg_fname,"r");
if (rxg_fd) {
printf("Loading RX Gain parameters from %s\n",rxg_fname);
l=0;
while (fgets(line, sizeof(line), rxg_fd)) {
if ((strlen(line)==0) || (*line == '#')) continue; //ignore empty or comment lines
else {
if (l==0) sscanf(line,"%d %d %d %d",&rxg_max[0],&rxg_max[1],&rxg_max[2],&rxg_max[3]);
if (l==1) sscanf(line,"%d %d %d %d",&rxg_med[0],&rxg_med[1],&rxg_med[2],&rxg_med[3]);
if (l==2) sscanf(line,"%d %d %d %d",&rxg_byp[0],&rxg_byp[1],&rxg_byp[2],&rxg_byp[3]);
l++;
}
}
}
else
printf("%s not found, running with defaults\n",rxg_fname);
sprintf(txg_fname,"%stxg.lime",optarg);
txg_fd = fopen(txg_fname,"r");
if (txg_fd) {
printf("Loading TX Gain parameters from %s\n",txg_fname);
l=0;
while (fgets(line, sizeof(line), txg_fd)) {
if ((strlen(line)==0) || (*line == '#')) {
continue; //ignore empty or comment lines
}
else {
if (l==0) sscanf(line,"%d %d %d %d",&txgain[0],&txgain[1],&txgain[2],&txgain[3]);
if (l==1) sscanf(line,"%d",&tx_max_power);
l++;
}
}
}
else
printf("%s not found, running with defaults\n",txg_fname);
sprintf(rflo_fname,"%srflo.lime",optarg);
rflo_fd = fopen(rflo_fname,"r");
if (rflo_fd) {
printf("Loading RF LO parameters from %s\n",rflo_fname);
fscanf(rflo_fd,"%d %d %d %d",&rf_local[0],&rf_local[1],&rf_local[2],&rf_local[3]);
}
else
printf("%s not found, running with defaults\n",rflo_fname);
sprintf(rfdc_fname,"%srfdc.lime",optarg);
rfdc_fd = fopen(rfdc_fname,"r");
if (rfdc_fd) {
printf("Loading RF DC parameters from %s\n",rfdc_fname);
fscanf(rfdc_fd,"%d %d %d %d",&rf_rxdc[0],&rf_rxdc[1],&rf_rxdc[2],&rf_rxdc[3]);
}
else
printf("%s not found, running with defaults\n",rfdc_fname);
break;
case 256:
mode = rx_calib_ue;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA max), input level %d dBm\n",rx_input_level_dBm);
break;
case 257:
mode = rx_calib_ue_med;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA med), input level %d dBm\n",rx_input_level_dBm);
break;
case 258:
mode = rx_calib_ue_byp;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA byp), input level %d dBm\n",rx_input_level_dBm);
break;
case 259:
mode = debug_prach;
break;
case 260:
mode = no_L2_connect;
break;
default:
break;
}
}
if (UE_flag==1)
printf("configuring for UE\n");
else
printf("configuring for eNB\n");
//randominit (0);
set_taus_seed (0);
// initialize the log (see log.h for details)
logInit();
if (ouput_vcd) {
if (UE_flag==1)
vcd_signal_dumper_init("/tmp/openair_dump_UE.vcd");
else
vcd_signal_dumper_init("/tmp/openair_dump_eNB.vcd");
}
#ifdef NAS_NETLINK
netlink_init();
#endif
// to make a graceful exit when ctrl-c is pressed
//signal(SIGSEGV, signal_handler);
//signal(SIGINT, signal_handler);
#ifndef RTAI
check_clock();
#endif
// init the parameters
frame_parms = (LTE_DL_FRAME_PARMS*) malloc(sizeof(LTE_DL_FRAME_PARMS));
frame_parms->N_RB_DL = 25;
frame_parms->N_RB_UL = 25;
frame_parms->Ncp = 0;
frame_parms->Ncp_UL = 0;
frame_parms->Nid_cell = Nid_cell;
frame_parms->nushift = 0;
frame_parms->nb_antennas_tx_eNB = 1; //initial value overwritten by initial sync later
// frame_parms->nb_antennas_tx = (UE_flag==0) ? 1 : 1;
// frame_parms->nb_antennas_rx = (UE_flag==0) ? 1 : 1;
frame_parms->nb_antennas_tx = 1;
frame_parms->nb_antennas_rx = 1;
frame_parms->mode1_flag = (transmission_mode == 1) ? 1 : 0;
frame_parms->frame_type = 1;
frame_parms->tdd_config = 3;
frame_parms->tdd_config_S = 0;
frame_parms->phich_config_common.phich_resource = oneSixth;
frame_parms->phich_config_common.phich_duration = normal;
// UL RS Config
frame_parms->pusch_config_common.ul_ReferenceSignalsPUSCH.cyclicShift = 0;//n_DMRS1 set to 0
frame_parms->pusch_config_common.ul_ReferenceSignalsPUSCH.groupHoppingEnabled = 0;
frame_parms->pusch_config_common.ul_ReferenceSignalsPUSCH.sequenceHoppingEnabled = 0;
frame_parms->pusch_config_common.ul_ReferenceSignalsPUSCH.groupAssignmentPUSCH = 0;
//print [PHY] ... message
init_ul_hopping(frame_parms);
//print [PHY][I][INIT]... message
init_frame_parms(frame_parms,1);
phy_init_top(frame_parms);
phy_init_lte_top(frame_parms);
//init prach for openair1 test
frame_parms->prach_config_common.rootSequenceIndex=22;
frame_parms->prach_config_common.prach_ConfigInfo.zeroCorrelationZoneConfig=1;
frame_parms->prach_config_common.prach_ConfigInfo.prach_ConfigIndex=0;
frame_parms->prach_config_common.prach_ConfigInfo.highSpeedFlag=0;
frame_parms->prach_config_common.prach_ConfigInfo.prach_FreqOffset=0;
prach_fmt = get_prach_fmt(frame_parms->prach_config_common.prach_ConfigInfo.prach_ConfigIndex,
frame_parms->frame_type);
N_ZC = (prach_fmt <4)?839:139;
if (UE_flag==1) {
#ifdef OPENAIR2
g_log->log_component[PHY].level = LOG_INFO;
#else
g_log->log_component[PHY].level = LOG_INFO;
#endif
g_log->log_component[PHY].flag = LOG_HIGH;
g_log->log_component[MAC].level = LOG_INFO;
g_log->log_component[MAC].flag = LOG_HIGH;
g_log->log_component[RLC].level = LOG_INFO;
g_log->log_component[RLC].flag = LOG_HIGH;
g_log->log_component[PDCP].level = LOG_INFO;
g_log->log_component[PDCP].flag = LOG_HIGH;
g_log->log_component[OTG].level = LOG_INFO;
g_log->log_component[OTG].flag = LOG_HIGH;
g_log->log_component[RRC].level = LOG_INFO;
g_log->log_component[RRC].flag = LOG_HIGH;
PHY_vars_UE_g = malloc(sizeof(PHY_VARS_UE*));
//print [PHY][I][init_lte_eNB]... messages
PHY_vars_UE_g[0] = init_lte_UE(frame_parms, UE_id,abstraction_flag,transmission_mode);
#ifndef OPENAIR2
for (i=0;i<NUMBER_OF_eNB_MAX;i++) {
PHY_vars_UE_g[0]->pusch_config_dedicated[i].betaOffset_ACK_Index = beta_ACK;
PHY_vars_UE_g[0]->pusch_config_dedicated[i].betaOffset_RI_Index = beta_RI;
PHY_vars_UE_g[0]->pusch_config_dedicated[i].betaOffset_CQI_Index = beta_CQI;
PHY_vars_UE_g[0]->scheduling_request_config[i].sr_PUCCH_ResourceIndex = UE_id;
PHY_vars_UE_g[0]->scheduling_request_config[i].sr_ConfigIndex = 7+(UE_id%3);
PHY_vars_UE_g[0]->scheduling_request_config[i].dsr_TransMax = sr_n4;
}
#endif
compute_prach_seq(&PHY_vars_UE_g[0]->lte_frame_parms.prach_config_common,
PHY_vars_UE_g[0]->lte_frame_parms.frame_type,
PHY_vars_UE_g[0]->X_u);
PHY_vars_UE_g[0]->lte_ue_pdcch_vars[0]->crnti = 0x1234;
#ifndef OPENAIR2
PHY_vars_UE_g[0]->lte_ue_pdcch_vars[0]->crnti = 0x1235;
#endif
NB_UE_INST=1;
NB_INST=1;
openair_daq_vars.manual_timing_advance = 0;
//openair_daq_vars.timing_advance = TIMING_ADVANCE_HW;
openair_daq_vars.rx_gain_mode = DAQ_AGC_OFF;
openair_daq_vars.auto_freq_correction = 0;
openair_daq_vars.use_ia_receiver = 1;
// if AGC is off, the following values will be used
// for (i=0;i<4;i++)
// rxgain[i] = 20;
rxgain[0] = 20;
rxgain[1] = 20;
rxgain[2] = 20;
rxgain[3] = 20;
for (i=0;i<4;i++) {
PHY_vars_UE_g[0]->rx_gain_max[i] = rxg_max[i];
PHY_vars_UE_g[0]->rx_gain_med[i] = rxg_med[i];
PHY_vars_UE_g[0]->rx_gain_byp[i] = rxg_byp[i];
}
if ((mode == normal_txrx) || (mode == rx_calib_ue) || (mode == no_L2_connect) || (mode == debug_prach)) {
for (i=0; i<4; i++) {
PHY_vars_UE_g[0]->rx_gain_mode[i] = max_gain;
// frame_parms->rfmode[i] = rf_mode_max[i];
rf_mode[i] = (rf_mode[i] & (~LNAGAINMASK)) | LNAMax;
}
PHY_vars_UE_g[0]->rx_total_gain_dB = PHY_vars_UE_g[0]->rx_gain_max[0] + rxgain[0] - 30; //-30 because it was calibrated with a 30dB gain
}
else if ((mode == rx_calib_ue_med)) {
for (i=0; i<4; i++) {
PHY_vars_UE_g[0]->rx_gain_mode[i] = med_gain;
// frame_parms->rfmode[i] = rf_mode_med[i];
rf_mode[i] = (rf_mode[i] & (~LNAGAINMASK)) | LNAMed;
}
PHY_vars_UE_g[0]->rx_total_gain_dB = PHY_vars_UE_g[0]->rx_gain_med[0] + rxgain[0] - 30; //-30 because it was calibrated with a 30dB gain;
}
else if ((mode == rx_calib_ue_byp)) {
for (i=0; i<4; i++) {
PHY_vars_UE_g[0]->rx_gain_mode[i] = byp_gain;
// frame_parms->rfmode[i] = rf_mode_byp[i];
rf_mode[i] = (rf_mode[i] & (~LNAGAINMASK)) | LNAByp;
}
PHY_vars_UE_g[0]->rx_total_gain_dB = PHY_vars_UE_g[0]->rx_gain_byp[0] + rxgain[0] - 30; //-30 because it was calibrated with a 30dB gain;
}
PHY_vars_UE_g[0]->tx_power_max_dBm = tx_max_power;
printf("tx_max_power = %d -> amp %d\n",tx_max_power,get_tx_amp(tx_max_power,tx_max_power));
}
else { //this is eNB
#ifdef OPENAIR2
g_log->log_component[PHY].level = LOG_INFO;
#else
g_log->log_component[PHY].level = LOG_INFO;
#endif
g_log->log_component[PHY].flag = LOG_HIGH;
g_log->log_component[MAC].level = LOG_INFO;
g_log->log_component[MAC].flag = LOG_HIGH;
g_log->log_component[RLC].level = LOG_INFO;
g_log->log_component[RLC].flag = LOG_HIGH;
g_log->log_component[PDCP].level = LOG_INFO;
g_log->log_component[PDCP].flag = LOG_HIGH;
g_log->log_component[OTG].level = LOG_INFO;
g_log->log_component[OTG].flag = LOG_HIGH;
g_log->log_component[RRC].level = LOG_INFO;
g_log->log_component[RRC].flag = LOG_HIGH;
PHY_vars_eNB_g = malloc(sizeof(PHY_VARS_eNB*));
PHY_vars_eNB_g[0] = init_lte_eNB(frame_parms,eNB_id,Nid_cell,cooperation_flag,transmission_mode,abstraction_flag);
#ifndef OPENAIR2
for (i=0;i<NUMBER_OF_UE_MAX;i++) {
PHY_vars_eNB_g[0]->pusch_config_dedicated[i].betaOffset_ACK_Index = beta_ACK;
PHY_vars_eNB_g[0]->pusch_config_dedicated[i].betaOffset_RI_Index = beta_RI;
PHY_vars_eNB_g[0]->pusch_config_dedicated[i].betaOffset_CQI_Index = beta_CQI;
PHY_vars_eNB_g[0]->scheduling_request_config[i].sr_PUCCH_ResourceIndex = i;
PHY_vars_eNB_g[0]->scheduling_request_config[i].sr_ConfigIndex = 7+(i%3);
PHY_vars_eNB_g[0]->scheduling_request_config[i].dsr_TransMax = sr_n4;
}
#endif
compute_prach_seq(&PHY_vars_eNB_g[0]->lte_frame_parms.prach_config_common,
PHY_vars_eNB_g[0]->lte_frame_parms.frame_type,
PHY_vars_eNB_g[0]->X_u);
NB_eNB_INST=1;
NB_INST=1;
openair_daq_vars.ue_dl_rb_alloc=0x1fff;
openair_daq_vars.target_ue_dl_mcs=20;
openair_daq_vars.ue_ul_nb_rb=6;
openair_daq_vars.target_ue_ul_mcs=9;
// if AGC is off, the following values will be used
// for (i=0;i<4;i++)
// rxgain[i]=30;
rxgain[0] = 20;
rxgain[1] = 20;
rxgain[2] = 20;
rxgain[3] = 20;
// set eNB to max gain
PHY_vars_eNB_g[0]->rx_total_gain_eNB_dB = rxg_max[0] + rxgain[0] - 30; //was measured at rxgain=30;
for (i=0; i<4; i++) {
// frame_parms->rfmode[i] = rf_mode_max[i];
rf_mode[i] = (rf_mode[i] & (~LNAGAINMASK)) | LNAMax;
}
}
dump_frame_parms(frame_parms);
mac_xface = malloc(sizeof(MAC_xface));
#ifdef OPENAIR2
int eMBMS_active=0;
//print [MAC][I]... messages
//l2_init(frame_parms,eMBMS_active);
l2_init(frame_parms,eMBMS_active,
0,// cba_group_active
0); // HO flag
if (UE_flag == 1)
mac_xface->dl_phy_sync_success (0, 0, 0, 1);
else
mac_xface->mrbch_phy_sync_failure (0, 0, 0);
#endif
mac_xface->macphy_exit = &exit_fun;
#ifdef OPENAIR2
//if (otg_enabled) {
init_all_otg(0);
g_otg->seed = 0;
init_seeds(g_otg->seed);
g_otg->num_nodes = 2;
for (i=0; i<g_otg->num_nodes; i++){
for (j=0; j<g_otg->num_nodes; j++){
g_otg->application_idx[i][j] = 1;
//g_otg->packet_gen_type=SUBSTRACT_STRING;
g_otg->aggregation_level[i][j][0]=1;
g_otg->application_type[i][j][0] = BCBR; //MCBR, BCBR
}
}
init_predef_traffic();
//USRP INIT
UHD_init();
UHD_init_display();
Init_send();
Init_recv();
printf("USRP init DONE...\n");
// }
#endif
// connect the TX/RX buffers
if (UE_flag==1) {
setup_ue_buffers(PHY_vars_UE_g[0],frame_parms,0);
printf("Setting UE buffer to all-RX\n");
}
else {
setup_eNB_buffers(PHY_vars_eNB_g[0],frame_parms,0);
if (fs4_test==0)
{
printf("Setting eNB buffer to all-RX\n");
}
else {
printf("Setting eNB buffer to fs/4 test signal\n");
for (j=0; j<PHY_vars_eNB_g[0]->lte_frame_parms.samples_per_tti*10; j+=4)
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++)
{
amp = 0x8000;
((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+1] = 0;
((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+3] = amp-1;
((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+5] = 0;
((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+7] = amp;
((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j] = amp-1;
((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+2] = 0;
((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+4] = amp;
((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+6] = 0;
}
}
}
//rt_sleep_ns(10*FRAME_PERIOD);//delay one second
#ifndef RTAI
pthread_attr_init (&attr_dlsch_threads);
pthread_attr_setstacksize(&attr_dlsch_threads,OPENAIR_THREAD_STACK_SIZE);
//attr_dlsch_threads.priority = 1;
sched_param_dlsch.sched_priority = sched_get_priority_max(SCHED_FIFO); //OPENAIR_THREAD_PRIORITY;
pthread_attr_setschedparam (&attr_dlsch_threads, &sched_param_dlsch);
pthread_attr_setschedpolicy (&attr_dlsch_threads, SCHED_FIFO);
#endif
// start the main thread
if (UE_flag == 1) {
#ifdef RTAI
thread1 = rt_thread_create(UE_thread, NULL, 100000000);
thread_recv = rt_thread_create(usrp_thread, NULL, 100000000);
#else
error_code = pthread_create(&thread1, &attr_dlsch_threads, UE_thread, NULL);
if (error_code!= 0) {
LOG_D(HW,"[lte-softmodem.c] Could not allocate UE_thread, error %d\n",error_code);
return(error_code);
}
else {
LOG_D(HW,"[lte-softmodem.c] Allocate UE_thread successful\n");
}
pthread_create(&thread_recv, NULL, usrp_thread, NULL);
#endif
#ifdef DLSCH_THREAD//defined
init_rx_pdsch_thread();
//rt_sleep_ns(FRAME_PERIOD/10);
init_dlsch_threads();
#endif
}
else {
#ifdef RTAI
thread0 = rt_thread_create(eNB_thread, NULL, 100000000);
thread_recv = rt_thread_create(usrp_thread, NULL, 100000000);
#else
error_code = pthread_create(&thread0, &attr_dlsch_threads, eNB_thread, NULL);
if (error_code!= 0) {
LOG_D(HW,"[lte-softmodem.c] Could not allocate eNB_thread, error %d\n",error_code);
return(error_code);
}
else {
LOG_D(HW,"[lte-softmodem.c] Allocate eNB_thread successful\n");
}
pthread_create(&thread_recv, NULL, usrp_thread, NULL);
#endif
#ifdef ULSCH_THREAD//not defined
init_ulsch_threads();
#endif
}
pthread_create(&thread_tx_error, NULL, tx_error_handler, NULL);
// wait for end of program
usleep(500);
printf("TYPE <CTRL-C> TO TERMINATE\n");
signal(SIGINT, &sig_int_handler);
while (oai_exit==0)
sleep(1);
// cleanup
pthread_join(thread_tx_error,&status);
if (UE_flag == 1) {
#ifdef RTAI
rt_thread_join(thread1);
rt_thread_join(thread_recv);
#else
pthread_join(thread1,&status);
pthread_join(thread_recv,&status);
#endif
#ifdef DLSCH_THREAD
printf("waiting for DLSCH_THREAD thread\n");
cleanup_dlsch_threads();
cleanup_rx_pdsch_thread();
#endif
}
else {
#ifdef RTAI
printf("Cleanup eNB thread and usrp thread\n");
rt_thread_join(thread0);
rt_thread_join(thread_recv);
#else
pthread_join(thread0,&status);
pthread_join(thread_recv,&status);
#endif
#ifdef ULSCH_THREAD
printf("waiting for ULSCH_THREAD thread\n");
cleanup_ulsch_threads();
#endif
}
logClean();
printf("Program Done!\n");
return 0;
}
void test_config(int card, int ant, unsigned int rf_mode, int UE_flag)
{
p_exmimo_config->framing.eNB_flag = !UE_flag;
p_exmimo_config->framing.tdd_config = 0;
p_exmimo_config->framing.resampling_factor = 2;
p_exmimo_config->rf.rf_freq_rx[ant] = 1907600000;
p_exmimo_config->rf.rf_freq_tx[ant] = 1907600000;;
p_exmimo_config->rf.rx_gain[ant][0] = 20;
p_exmimo_config->rf.tx_gain[ant][0] = 10;
p_exmimo_config->rf.rf_mode[ant] = rf_mode;
p_exmimo_config->rf.rf_local[ant] = build_rflocal(20,25,26,04);
p_exmimo_config->rf.rf_rxdc[ant] = build_rfdc(128, 128);
p_exmimo_config->rf.rf_vcocal[ant] = (0xE<<6) + 0xE;
}
void setup_ue_buffers(PHY_VARS_UE *phy_vars_ue, LTE_DL_FRAME_PARMS *frame_parms, int carrier) {
int i;
if (phy_vars_ue) {
if ((frame_parms->nb_antennas_rx>1) && (carrier>0)) {
printf("RX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
if ((frame_parms->nb_antennas_tx>1) && (carrier>0)) {
printf("TX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
// replace RX signal buffers with mmaped HW versions
for (i=0;i<frame_parms->nb_antennas_rx;i++) {
free(phy_vars_ue->lte_ue_common_vars.rxdata[i]);
phy_vars_ue->lte_ue_common_vars.rxdata[i] = (s32*) oai_rx_buff;
printf("rxdata[%d] @ %p\n",i,phy_vars_ue->lte_ue_common_vars.rxdata[i]);
}
for (i=0;i<frame_parms->nb_antennas_tx;i++) {
free(phy_vars_ue->lte_ue_common_vars.txdata[i]);
phy_vars_ue->lte_ue_common_vars.txdata[i] = (s32*) oai_tx_buff;
printf("txdata[%d] @ %p\n",i,phy_vars_ue->lte_ue_common_vars.txdata[i]);
}
}
}
void setup_eNB_buffers(PHY_VARS_eNB *phy_vars_eNB, LTE_DL_FRAME_PARMS *frame_parms, int carrier) {
int i;
if (phy_vars_eNB) {
if ((frame_parms->nb_antennas_rx>1) && (carrier>0)) {
printf("RX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
if ((frame_parms->nb_antennas_tx>1) && (carrier>0)) {
printf("TX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
// replace RX signal buffers with mmaped HW versions
for (i=0;i<frame_parms->nb_antennas_rx;i++) {
free(phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i]);
phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i] = (s32 *) oai_rx_buff;
printf("rxdata[%d] @ %p\n",i,phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i]);
/* for (j=0;j<16;j++) {
printf("rxbuffer %d: %x\n",j,phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i][j]);
phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i][j] = 16-j;
}*/
}
for (i=0;i<frame_parms->nb_antennas_tx;i++) {
free(phy_vars_eNB->lte_eNB_common_vars.txdata[0][i]);
phy_vars_eNB->lte_eNB_common_vars.txdata[0][i] = (s32 *) oai_tx_buff;
printf("txdata[%d] @ %p\n",i,phy_vars_eNB->lte_eNB_common_vars.txdata[0][i]);
/* for (j=0;j<16;j++) {
printf("txbuffer %d: %x\n",j,phy_vars_eNB->lte_eNB_common_vars.txdata[0][i][j]);
phy_vars_eNB->lte_eNB_common_vars.txdata[0][i][j] = 16-j;
}*/
}
}
}
targets/RTAI/USER/lte-softmodem.c deleted 100644 → 0
View file @ 337df938
/*******************************************************************************
Eurecom OpenAirInterface
Copyright(c) 1999 - 2011 Eurecom
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information
Openair Admin: openair_admin@eurecom.fr
Openair Tech : openair_tech@eurecom.fr
Forums : http://forums.eurecom.fsr/openairinterface
Address : Eurecom, 2229, route des crêtes, 06560 Valbonne Sophia Antipolis, France
*******************************************************************************/
/*! \file lte-softmodem.c
* \brief main program to control HW and scheduling
* \author R. Knopp, F. Kaltenberger
* \date 2012
* \version 0.1
* \company Eurecom
* \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr
* \note
* \warning
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sched.h>
#include <signal.h>
#include <execinfo.h>
#include <getopt.h>
#include "rt_wrapper.h"
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
#include "assertions.h"
#ifdef EMOS
#include <gps.h>
#endif
#include "PHY/types.h"
#include "PHY/defs.h"
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all
#include "openair0_lib.h"
#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all
#include "PHY/vars.h"
#include "MAC_INTERFACE/vars.h"
//#include "SCHED/defs.h"
#include "SCHED/vars.h"
#include "LAYER2/MAC/vars.h"
#include "../../SIMU/USER/init_lte.h"
#ifdef EMOS
#include "SCHED/phy_procedures_emos.h"
#endif
#ifdef OPENAIR2
#include "otg_tx.h"
#include "LAYER2/MAC/defs.h"
#include "LAYER2/MAC/vars.h"
#ifndef CELLULAR
#include "RRC/LITE/vars.h"
#endif
#include "PHY_INTERFACE/vars.h"
#endif
#ifdef SMBV
#include "PHY/TOOLS/smbv.h"
unsigned short config_frames[4] = {2,9,11,13};
#endif
#include "UTIL/LOG/log_extern.h"
#include "UTIL/OTG/otg.h"
#include "UTIL/OTG/otg_vars.h"
#include "UTIL/MATH/oml.h"
#include "UTIL/LOG/vcd_signal_dumper.h"
#include "enb_config.h"
#if defined(ENABLE_ITTI)
# include "intertask_interface_init.h"
# include "create_tasks.h"
# if defined(ENABLE_USE_MME)
# include "s1ap_eNB.h"
# endif
#endif
#ifdef XFORMS
#include "PHY/TOOLS/lte_phy_scope.h"
#include "stats.h"
#endif
#define FRAME_PERIOD 100000000ULL
#define DAQ_PERIOD 66667ULL
#define MY_RF_MODE (RXEN + TXEN + TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM + DMAMODE_RX + DMAMODE_TX)
#define RF_MODE_BASE (TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM)
struct timing_info_t {
//unsigned int frame, hw_slot, last_slot, next_slot;
RTIME time_min, time_max, time_avg, time_last, time_now;
//unsigned int mbox0, mbox1, mbox2, mbox_target;
unsigned int n_samples;
} timing_info;
extern int16_t* sync_corr_ue0;
extern int16_t prach_ifft[4][1024*2];
int init_dlsch_threads(void);
void cleanup_dlsch_threads(void);
int32_t init_rx_pdsch_thread(void);
void cleanup_rx_pdsch_thread(void);
int init_ulsch_threads(void);
void cleanup_ulsch_threads(void);
void setup_ue_buffers(PHY_VARS_UE *phy_vars_ue, LTE_DL_FRAME_PARMS *frame_parms, int carrier);
void setup_eNB_buffers(PHY_VARS_eNB *phy_vars_eNB, LTE_DL_FRAME_PARMS *frame_parms, int carrier);
void test_config(int card, int ant, unsigned int rf_mode, int UE_flag);
#ifdef XFORMS
// current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
// at eNB 0, an UL scope for every UE
FD_lte_phy_scope_ue *form_ue[NUMBER_OF_UE_MAX];
FD_lte_phy_scope_enb *form_enb[NUMBER_OF_UE_MAX];
FD_stats_form *form_stats=NULL;
char title[255];
unsigned char scope_enb_num_ue = 1;
#endif //XFORMS
#ifdef RTAI
static SEM *mutex;
//static CND *cond;
static int thread0;
static int thread1;
//static int sync_thread;
#else
pthread_t thread0;
pthread_t thread1;
pthread_attr_t attr_dlsch_threads;
struct sched_param sched_param_dlsch;
#endif
#ifdef XFORMS
static pthread_t thread2; //xforms
#endif
#ifdef EMOS
static pthread_t thread3; //emos
#endif
/*
static int instance_cnt=-1; //0 means worker is busy, -1 means its free
int instance_cnt_ptr_kern,*instance_cnt_ptr_user;
int pci_interface_ptr_kern;
*/
//extern unsigned int bigphys_top;
//extern unsigned int mem_base;
int card = 0;
static exmimo_config_t *p_exmimo_config;
static exmimo_id_t *p_exmimo_id;
static volatile unsigned int *DAQ_MBOX;
#if defined(ENABLE_ITTI)
static volatile int start_eNB = 0;
static volatile int start_UE = 0;
#endif
volatile int oai_exit = 0;
//static int time_offset[4] = {-138,-138,-138,-138};
//static int time_offset[4] = {-145,-145,-145,-145};
static int time_offset[4] = {0,0,0,0};
static int fs4_test=0;
static char UE_flag=0;
static uint8_t eNB_id=0,UE_id=0;
uint32_t carrier_freq[4] = {1907600000,1907600000,1907600000,1907600000}; /* For UE! */
static uint32_t downlink_frequency[4] = {1907600000,1907600000,1907600000,1907600000};
static int32_t uplink_frequency_offset[4]= {-120000000,-120000000,-120000000,-120000000};
static char *conf_config_file_name = NULL;
static char *itti_dump_file = NULL;
static char rxg_fname[100];
static char txg_fname[100];
static char rflo_fname[100];
static char rfdc_fname[100];
static FILE *rxg_fd=NULL;
static FILE *txg_fd=NULL;
static FILE *rflo_fd=NULL;
static FILE *rfdc_fd=NULL;
static unsigned int rxg_max[4] = {133,133,133,133};
static unsigned int rxg_med[4] = {127,127,127,127};
static unsigned int rxg_byp[4] = {120,120,120,120};
static int tx_max_power = 0;
/*
uint32_t rf_mode_max[4] = {55759,55759,55759,55759};
uint32_t rf_mode_med[4] = {39375,39375,39375,39375};
uint32_t rf_mode_byp[4] = {22991,22991,22991,22991};
*/
static uint32_t rf_mode[4] = {MY_RF_MODE,0,0,0};
static uint32_t rf_local[4] = {8255000,8255000,8255000,8255000}; // UE zepto
//{8254617, 8254617, 8254617, 8254617}; //eNB khalifa
//{8255067,8254810,8257340,8257340}; // eNB PETRONAS
static uint32_t rf_vcocal[4] = {910,910,910,910};
static uint32_t rf_vcocal_850[4] = {2015, 2015, 2015, 2015};
static uint32_t rf_rxdc[4] = {32896,32896,32896,32896};
static uint32_t rxgain[4] = {20,20,20,20};
static uint32_t txgain[4] = {20,20,20,20};
static runmode_t mode;
static int rx_input_level_dBm;
#ifdef XFORMS
extern int otg_enabled;
static char do_forms=0;
#else
int otg_enabled;
#endif
int number_of_cards = 1;
static int mbox_bounds[20] = {8,16,24,30,38,46,54,60,68,76,84,90,98,106,114,120,128,136,144, 0}; ///boundaries of slots in terms ob mbox counter rounded up to even numbers
//static int mbox_bounds[20] = {6,14,22,28,36,44,52,58,66,74,82,88,96,104,112,118,126,134,142, 148}; ///boundaries of slots in terms ob mbox counter rounded up to even numbers
static LTE_DL_FRAME_PARMS *frame_parms;
unsigned int build_rflocal(int txi, int txq, int rxi, int rxq)
{
return (txi + (txq<<6) + (rxi<<12) + (rxq<<18));
}
unsigned int build_rfdc(int dcoff_i_rxfe, int dcoff_q_rxfe)
{
return (dcoff_i_rxfe + (dcoff_q_rxfe<<8));
}
#if !defined(ENABLE_ITTI)
void signal_handler(int sig)
{
void *array[10];
size_t size;
if (sig==SIGSEGV) {
// get void*'s for all entries on the stack
size = backtrace(array, 10);
// print out all the frames to stderr
fprintf(stderr, "Error: signal %d:\n", sig);
backtrace_symbols_fd(array, size, 2);
exit(-1);
}
else {
oai_exit = 1;
}
}
#endif
void exit_fun(const char* s)
{
if (s != NULL) {
printf("Exiting: %s\n",s);
}
oai_exit = 1;
#if defined(ENABLE_ITTI)
itti_terminate_tasks (TASK_UNKNOWN);
#endif
//rt_sleep_ns(FRAME_PERIOD);
//exit (-1);
}
#ifdef XFORMS
static void *scope_thread(void *arg) {
char stats_buffer[16384];
# ifdef ENABLE_XFORMS_WRITE_STATS
FILE *UE_stats, *eNB_stats;
int len = 0;
# endif
struct sched_param sched_param;
sched_param.sched_priority = sched_get_priority_min(SCHED_FIFO)+1;
sched_setscheduler(0, SCHED_FIFO,&sched_param);
printf("Scope thread has priority %d\n",sched_param.sched_priority);
/*
if (UE_flag==1)
UE_stats = fopen("UE_stats.txt", "w");
else
eNB_stats = fopen("eNB_stats.txt", "w");
*/
while (!oai_exit) {
if (UE_flag==1) {
# ifdef ENABLE_XFORMS_WRITE_STATS
len =
# endif
dump_ue_stats (PHY_vars_UE_g[0], stats_buffer, 0, mode,rx_input_level_dBm);
fl_set_object_label(form_stats->stats_text, stats_buffer);
# ifdef ENABLE_XFORMS_WRITE_STATS
rewind (UE_stats);
fwrite (stats_buffer, 1, len, UE_stats);
# endif
phy_scope_UE(form_ue[UE_id],
PHY_vars_UE_g[UE_id],
eNB_id,
UE_id,7);
} else {
# ifdef ENABLE_XFORMS_WRITE_STATS
len =
# endif
dump_eNB_stats (PHY_vars_eNB_g[0], stats_buffer, 0);
fl_set_object_label(form_stats->stats_text, stats_buffer);
# ifdef ENABLE_XFORMS_WRITE_STATS
rewind (eNB_stats);
fwrite (stats_buffer, 1, len, eNB_stats);
# endif
for(UE_id=0;UE_id<scope_enb_num_ue;UE_id++) {
phy_scope_eNB(form_enb[UE_id],
PHY_vars_eNB_g[eNB_id],
UE_id);
}
}
//printf("doing forms\n");
usleep(100000); // 100 ms
}
# ifdef ENABLE_XFORMS_WRITE_STATS
fclose (UE_stats);
fclose (eNB_stats);
# endif
pthread_exit((void*)arg);
}
#endif
int dummy_tx_buffer[3840*4] __attribute__((aligned(16)));
#ifdef EMOS
#define NO_ESTIMATES_DISK 100 //No. of estimates that are aquired before dumped to disk
void *emos_thread (void *arg)
{
char c;
char *fifo2file_buffer, *fifo2file_ptr;
int fifo, counter=0, bytes;
FILE *dumpfile_id;
char dumpfile_name[1024];
time_t starttime_tmp;
struct tm starttime;
int channel_buffer_size;
time_t timer;
struct tm *now;
struct gps_data_t *gps_data = NULL;
struct gps_fix_t dummy_gps_data;
struct sched_param sched_param;
sched_param.sched_priority = sched_get_priority_max(SCHED_FIFO)-1;
sched_setscheduler(0, SCHED_FIFO,&sched_param);
printf("EMOS thread has priority %d\n",sched_param.sched_priority);
timer = time(NULL);
now = localtime(&timer);
memset(&dummy_gps_data,1,sizeof(struct gps_fix_t));
gps_data = gps_open("127.0.0.1","2947");
if (gps_data == NULL)
{
printf("[EMOS] Could not open GPS\n");
//exit(-1);
}
#if GPSD_API_MAJOR_VERSION>=4
else if (gps_stream(gps_data, WATCH_ENABLE,NULL) != 0)
#else
else if (gps_query(gps_data, "w+x") != 0)
#endif
{
//sprintf(tmptxt,"Error sending command to GPS, gps_data = %x", gps_data);
printf("[EMOS] Error sending command to GPS\n");
//exit(-1);
}
else
printf("[EMOS] Opened GPS, gps_data=%p\n");
if (UE_flag==0)
channel_buffer_size = sizeof(fifo_dump_emos_eNB);
else
channel_buffer_size = sizeof(fifo_dump_emos_UE);
// allocate memory for NO_FRAMES_DISK channes estimations
fifo2file_buffer = malloc(NO_ESTIMATES_DISK*channel_buffer_size);
fifo2file_ptr = fifo2file_buffer;
if (fifo2file_buffer == NULL)
{
printf("[EMOS] Cound not allocate memory for fifo2file_buffer\n");
exit(EXIT_FAILURE);
}
if ((fifo = open(CHANSOUNDER_FIFO_DEV, O_RDONLY)) < 0)
{
fprintf(stderr, "[EMOS] Error opening the fifo\n");
exit(EXIT_FAILURE);
}
time(&starttime_tmp);
localtime_r(&starttime_tmp,&starttime);
snprintf(dumpfile_name,1024,"/tmp/%s_data_%d%02d%02d_%02d%02d%02d.EMOS",
(UE_flag==0) ? "eNB" : "UE",
1900+starttime.tm_year, starttime.tm_mon+1, starttime.tm_mday, starttime.tm_hour, starttime.tm_min, starttime.tm_sec);
dumpfile_id = fopen(dumpfile_name,"w");
if (dumpfile_id == NULL)
{
fprintf(stderr, "[EMOS] Error opening dumpfile %s\n",dumpfile_name);
exit(EXIT_FAILURE);
}
printf("[EMOS] starting dump, channel_buffer_size=%d ...\n",channel_buffer_size);
while (!oai_exit)
{
bytes = rtf_read_timed(fifo, fifo2file_ptr, channel_buffer_size,100);
if (bytes==0)
continue;
/*
if (UE_flag==0)
printf("eNB: count %d, frame %d, read: %d bytes from the fifo\n",counter, ((fifo_dump_emos_eNB*)fifo2file_ptr)->frame_tx,bytes);
else
printf("UE: count %d, frame %d, read: %d bytes from the fifo\n",counter, ((fifo_dump_emos_UE*)fifo2file_ptr)->frame_rx,bytes);
*/
fifo2file_ptr += channel_buffer_size;
counter ++;
if (counter == NO_ESTIMATES_DISK)
{
//reset stuff
fifo2file_ptr = fifo2file_buffer;
counter = 0;
//flush buffer to disk
if (UE_flag==0)
printf("[EMOS] eNB: count %d, frame %d, flushing buffer to disk\n",
counter, ((fifo_dump_emos_eNB*)fifo2file_ptr)->frame_tx);
else
printf("[EMOS] UE: count %d, frame %d, flushing buffer to disk\n",
counter, ((fifo_dump_emos_UE*)fifo2file_ptr)->frame_rx);
if (fwrite(fifo2file_buffer, sizeof(char), NO_ESTIMATES_DISK*channel_buffer_size, dumpfile_id) != NO_ESTIMATES_DISK*channel_buffer_size)
{
fprintf(stderr, "[EMOS] Error writing to dumpfile\n");
exit(EXIT_FAILURE);
}
if (gps_data)
{
if (gps_poll(gps_data) != 0) {
printf("[EMOS] problem polling data from gps\n");
}
else {
printf("[EMOS] lat %g, lon %g\n",gps_data->fix.latitude,gps_data->fix.longitude);
}
if (fwrite(&(gps_data->fix), sizeof(char), sizeof(struct gps_fix_t), dumpfile_id) != sizeof(struct gps_fix_t))
{
printf("[EMOS] Error writing to dumpfile, stopping recording\n");
exit(EXIT_FAILURE);
}
}
else
{
printf("[EMOS] WARNING: No GPS data available, storing dummy packet\n");
if (fwrite(&(dummy_gps_data), sizeof(char), sizeof(struct gps_fix_t), dumpfile_id) != sizeof(struct gps_fix_t))
{
printf("[EMOS] Error writing to dumpfile, stopping recording\n");
exit(EXIT_FAILURE);
}
}
}
}
free(fifo2file_buffer);
fclose(dumpfile_id);
close(fifo);
pthread_exit((void*) arg);
}
#endif
#if defined(ENABLE_ITTI)
static void wait_system_ready (char *message, volatile int *start_flag)
{
/* Wait for eNB application initialization to be complete (eNB registration to MME) */
{
static char *indicator[] = {". ", ".. ", "... ", ".... ", ".....",
" ....", " ...", " ..", " .", " "};
int i = 0;
while ((!oai_exit) && (*start_flag == 0)) {
LOG_N(EMU, message, indicator[i]);
i = (i + 1) % (sizeof(indicator) / sizeof(indicator[0]));
usleep(200000);
}
LOG_D(EMU,"\n");
}
}
#endif
#if defined(ENABLE_ITTI)
void *l2l1_task(void *arg)
{
MessageDef *message_p = NULL;
int result;
itti_set_task_real_time(TASK_L2L1);
itti_mark_task_ready(TASK_L2L1);
if (UE_flag == 0) {
/* Wait for the initialize message */
do {
if (message_p != NULL) {
result = itti_free (ITTI_MSG_ORIGIN_ID(message_p), message_p);
AssertFatal (result == EXIT_SUCCESS, "Failed to free memory (%d)!\n", result);
}
itti_receive_msg (TASK_L2L1, &message_p);
switch (ITTI_MSG_ID(message_p)) {
case INITIALIZE_MESSAGE:
/* Start eNB thread */
start_eNB = 1;
break;
case TERMINATE_MESSAGE:
oai_exit=1;
itti_exit_task ();
break;
default:
LOG_E(EMU, "Received unexpected message %s\n", ITTI_MSG_NAME(message_p));
break;
}
} while (ITTI_MSG_ID(message_p) != INITIALIZE_MESSAGE);
result = itti_free (ITTI_MSG_ORIGIN_ID(message_p), message_p);
AssertFatal (result == EXIT_SUCCESS, "Failed to free memory (%d)!\n", result);
}
do {
// Wait for a message
itti_receive_msg (TASK_L2L1, &message_p);
switch (ITTI_MSG_ID(message_p)) {
case TERMINATE_MESSAGE:
oai_exit=1;
itti_exit_task ();
break;
case ACTIVATE_MESSAGE:
start_UE = 1;
break;
case DEACTIVATE_MESSAGE:
start_UE = 0;
break;
case MESSAGE_TEST:
LOG_I(EMU, "Received %s\n", ITTI_MSG_NAME(message_p));
break;
default:
LOG_E(EMU, "Received unexpected message %s\n", ITTI_MSG_NAME(message_p));
break;
}
result = itti_free (ITTI_MSG_ORIGIN_ID(message_p), message_p);
AssertFatal (result == EXIT_SUCCESS, "Failed to free memory (%d)!\n", result);
} while(1);
return NULL;
}
#endif
/* This is the main eNB thread. It gets woken up by the kernel driver using the RTAI message mechanism (rt_send and rt_receive). */
static void *eNB_thread(void *arg)
{
#ifdef RTAI
RT_TASK *task;
#endif
unsigned char slot=0,last_slot, next_slot;
int hw_slot,frame=0;
unsigned int aa,slot_offset, slot_offset_F;
int diff;
int delay_cnt;
RTIME time_in, time_diff;
int mbox_target=0,mbox_current=0;
int i,ret;
int tx_offset;
#if defined(ENABLE_ITTI)
/* Wait for eNB application initialization to be complete (eNB registration to MME) */
wait_system_ready ("Waiting for eNB application to be ready %s\r", &start_eNB);
#endif
#ifdef RTAI
task = rt_task_init_schmod(nam2num("TASK0"), 0, 0, 0, SCHED_FIFO, 0xF);
#endif
if (!oai_exit) {
#ifdef RTAI
LOG_D(HW,"Started eNB thread (id %p)\n",task);
#endif
#ifdef HARD_RT
rt_make_hard_real_time();
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
timing_info.time_min = 100000000ULL;
timing_info.time_max = 0;
timing_info.time_avg = 0;
timing_info.n_samples = 0;
while (!oai_exit)
{
hw_slot = (((((volatile unsigned int *)DAQ_MBOX)[0]+1)%150)<<1)/15;
//LOG_D(HW,"eNB frame %d, time %llu: slot %d, hw_slot %d (mbox %d)\n",frame,rt_get_time_ns(),slot,hw_slot,((unsigned int *)DAQ_MBOX)[0]);
//this is the mbox counter where we should be
//mbox_target = ((((slot+1)%20)*15+1)>>1)%150;
mbox_target = mbox_bounds[slot];
//this is the mbox counter where we are
mbox_current = ((volatile unsigned int *)DAQ_MBOX)[0];
//this is the time we need to sleep in order to synchronize with the hw (in multiples of DAQ_PERIOD)
if ((mbox_current>=135) && (mbox_target<15)) //handle the frame wrap-arround
diff = 150-mbox_current+mbox_target;
else if ((mbox_current<15) && (mbox_target>=135))
diff = -150+mbox_target-mbox_current;
else
diff = mbox_target - mbox_current;
if (((slot%2==0) && (diff < (-14))) || ((slot%2==1) && (diff < (-7)))) {
// at the eNB, even slots have double as much time since most of the processing is done here and almost nothing in odd slots
LOG_D(HW,"eNB Frame %d, time %llu: missed slot, proceeding with next one (slot %d, hw_slot %d, diff %d)\n",frame, rt_get_time_ns(), slot, hw_slot, diff);
slot++;
if (frame > 0) {
exit_fun("[HW][eNB] missed slot");
}
if (slot==20){
slot=0;
frame++;
}
continue;
}
if (diff>8)
LOG_D(HW,"eNB Frame %d, time %llu: skipped slot, waiting for hw to catch up (slot %d, hw_slot %d, mbox_current %d, mbox_target %d, diff %d)\n",frame, rt_get_time_ns(), slot, hw_slot, mbox_current, mbox_target, diff);
delay_cnt = 0;
while ((diff>0) && (!oai_exit))
{
time_in = rt_get_time_ns();
//LOG_D(HW,"eNB Frame %d delaycnt %d : hw_slot %d (%d), slot %d, (slot+1)*15=%d, diff %d, time %llu\n",frame,delay_cnt,hw_slot,((unsigned int *)DAQ_MBOX)[0],slot,(((slot+1)*15)>>1),diff,time_in);
//LOG_D(HW,"eNB Frame %d, time %llu: sleeping for %llu (slot %d, hw_slot %d, diff %d, mbox %d, delay_cnt %d)\n", frame, time_in, diff*DAQ_PERIOD,slot,hw_slot,diff,((volatile unsigned int *)DAQ_MBOX)[0],delay_cnt);
ret = rt_sleep_ns(diff*DAQ_PERIOD);
if (ret)
LOG_D(HW,"eNB Frame %d, time %llu: rt_sleep_ns returned %d\n",frame, time_in);
hw_slot = (((((volatile unsigned int *)DAQ_MBOX)[0]+1)%150)<<1)/15;
//LOG_D(HW,"eNB Frame %d : hw_slot %d, time %llu\n",frame,hw_slot,rt_get_time_ns());
delay_cnt++;
if (delay_cnt == 10)
{
LOG_D(HW,"eNB Frame %d: HW stopped ... \n",frame);
exit_fun("[HW][eNB] HW stopped");
}
mbox_current = ((volatile unsigned int *)DAQ_MBOX)[0];
if ((mbox_current>=135) && (mbox_target<15)) //handle the frame wrap-arround
diff = 150-mbox_current+mbox_target;
else if ((mbox_current<15) && (mbox_target>=135))
diff = -150+mbox_target-mbox_current;
else
diff = mbox_target - mbox_current;
}
last_slot = (slot)%LTE_SLOTS_PER_FRAME;
if (last_slot <0)
last_slot+=20;
next_slot = (slot+3)%LTE_SLOTS_PER_FRAME;
//PHY_vars_eNB_g[0]->frame = frame;
if (frame>5)
{
/*
if (frame%100==0)
LOG_D(HW,"frame %d (%d), slot %d, hw_slot %d, next_slot %d (before): DAQ_MBOX %d\n",frame, PHY_vars_eNB_g[0]->frame, slot, hw_slot,next_slot,DAQ_MBOX[0]);
*/
//if (PHY_vars_eNB_g[0]->frame>5) {
timing_info.time_last = timing_info.time_now;
timing_info.time_now = rt_get_time_ns();
if (timing_info.n_samples>0) {
time_diff = timing_info.time_now - timing_info.time_last;
if (time_diff < timing_info.time_min)
timing_info.time_min = time_diff;
if (time_diff > timing_info.time_max)
timing_info.time_max = time_diff;
timing_info.time_avg += time_diff;
}
timing_info.n_samples++;
/*
if ((timing_info.n_samples%2000)==0) {
LOG_D(HW,"frame %d (%d), slot %d, hw_slot %d: diff=%llu, min=%llu, max=%llu, avg=%llu (n_samples %d)\n",
frame, PHY_vars_eNB_g[0]->frame, slot, hw_slot,time_diff,
timing_info.time_min,timing_info.time_max,timing_info.time_avg/timing_info.n_samples,timing_info.n_samples);
timing_info.n_samples = 0;
timing_info.time_avg = 0;
}
*/
//}
if (fs4_test==0)
{
phy_procedures_eNB_lte (last_slot, next_slot, PHY_vars_eNB_g[0], 0, no_relay,NULL);
#ifndef IFFT_FPGA
slot_offset_F = (next_slot)*
(PHY_vars_eNB_g[0]->lte_frame_parms.ofdm_symbol_size)*
((PHY_vars_eNB_g[0]->lte_frame_parms.Ncp==1) ? 6 : 7);
slot_offset = (next_slot)*
(PHY_vars_eNB_g[0]->lte_frame_parms.samples_per_tti>>1);
if ((subframe_select(&PHY_vars_eNB_g[0]->lte_frame_parms,next_slot>>1)==SF_DL)||
((subframe_select(&PHY_vars_eNB_g[0]->lte_frame_parms,next_slot>>1)==SF_S)&&((next_slot&1)==0)))
{
// LOG_D(HW,"Frame %d: Generating slot %d\n",frame,next_slot);
for (aa=0; aa<PHY_vars_eNB_g[0]->lte_frame_parms.nb_antennas_tx; aa++)
{
if (PHY_vars_eNB_g[0]->lte_frame_parms.Ncp == 1)
{
PHY_ofdm_mod(&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdataF[0][aa][slot_offset_F],
#ifdef BIT8_TX
&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa][slot_offset>>1],
#else
dummy_tx_buffer,//&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa][slot_offset],
#endif
PHY_vars_eNB_g[0]->lte_frame_parms.log2_symbol_size,
6,
PHY_vars_eNB_g[0]->lte_frame_parms.nb_prefix_samples,
PHY_vars_eNB_g[0]->lte_frame_parms.twiddle_ifft,
PHY_vars_eNB_g[0]->lte_frame_parms.rev,
CYCLIC_PREFIX);
}
else
{
normal_prefix_mod(&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdataF[0][aa][slot_offset_F],
#ifdef BIT8_TX
&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa][slot_offset>>1],
#else
dummy_tx_buffer,//&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa][slot_offset],
#endif
7,
&(PHY_vars_eNB_g[0]->lte_frame_parms));
}
#ifdef EXMIMO
for (i=0; i<PHY_vars_eNB_g[0]->lte_frame_parms.samples_per_tti/2; i++)
{
tx_offset = (int)slot_offset+time_offset[aa]+i;
if (tx_offset<0)
tx_offset += LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*PHY_vars_eNB_g[0]->lte_frame_parms.samples_per_tti;
if (tx_offset>=(LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*PHY_vars_eNB_g[0]->lte_frame_parms.samples_per_tti))
tx_offset -= LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*PHY_vars_eNB_g[0]->lte_frame_parms.samples_per_tti;
((short*)&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa][tx_offset])[0]=
((short*)dummy_tx_buffer)[2*i]<<4;
((short*)&PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa][tx_offset])[1]=
((short*)dummy_tx_buffer)[2*i+1]<<4;
}
#endif //EXMIMO
}
}
}
#endif //IFFT_FPGA
/*
if (frame%100==0)
LOG_D(HW,"hw_slot %d (after): DAQ_MBOX %d\n",hw_slot,DAQ_MBOX[0]);
*/
}
/*
if ((slot%2000)<10)
LOG_D(HW,"fun0: doing very hard work\n");
*/
slot++;
if (slot==20) {
slot=0;
frame++;
}
#if defined(ENABLE_ITTI)
itti_update_lte_time(frame, slot);
#endif
}
LOG_D(HW,"eNB_thread: finished, ran %d times.\n",frame);
#ifdef HARD_RT
rt_make_soft_real_time();
#endif
}
// clean task
#ifdef RTAI
rt_task_delete(task);
#endif
LOG_D(HW,"Task deleted. returning\n");
return 0;
}
/* This is the main UE thread. Initially it is doing a periodic get_frame. One synchronized it gets woken up by the kernel driver using the RTAI message mechanism (rt_send and rt_receive). */
static void *UE_thread(void *arg)
{
#ifdef RTAI
RT_TASK *task;
#endif
// RTIME in, out, diff;
int slot=0,frame=0,hw_slot,last_slot, next_slot;
// unsigned int aa;
static int is_synchronized = 0;
int delay_cnt;
RTIME time_in;
int hw_slot_offset=0,rx_offset_mbox=0,mbox_target=0,mbox_current=0;
int diff2;
int i, ret;
#if defined(ENABLE_ITTI) && defined(ENABLE_USE_MME)
/* Wait for NAS UE to start cell selection */
wait_system_ready ("Waiting for UE to be activated by UserProcess %s\r", &start_UE);
#endif
#ifdef RTAI
task = rt_task_init_schmod(nam2num("TASK0"), 0, 0, 0, SCHED_FIFO, 0xF);
LOG_D(HW,"Started UE thread (id %p)\n",task);
#endif
#ifdef HARD_RT
rt_make_hard_real_time();
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
openair_daq_vars.freq_offset = 0; //-7500;
/*
if (mode == rx_calib_ue) {
openair_daq_vars.freq_offset = -7500;
for (i=0; i<4; i++) {
p_exmimo_config->rf.rf_freq_rx[i] = p_exmimo_config->rf.rf_freq_rx[i]+openair_daq_vars.freq_offset;
p_exmimo_config->rf.rf_freq_tx[i] = p_exmimo_config->rf.rf_freq_rx[i]+openair_daq_vars.freq_offset;
}
openair0_dump_config(card);
}
*/
while (!oai_exit)
{
hw_slot = (((((volatile unsigned int *)DAQ_MBOX)[0]+1)%150)<<1)/15; //the slot the hw is about to store
if (is_synchronized) {
//this is the mbox counter that indicates the start of the frame
rx_offset_mbox = (PHY_vars_UE_g[0]->rx_offset * 150) / (10*PHY_vars_UE_g[0]->lte_frame_parms.samples_per_tti);
//this is the mbox counter where we should be
mbox_target = (((((slot+1)%20)*15+1)>>1) + rx_offset_mbox + 1)%150;
// round up to the next multiple of two (mbox counter from express MIMO gives only even numbers)
mbox_target = ((mbox_target+1)-((mbox_target-1)%2))%150;
//this is the mbox counter where we are
mbox_current = ((volatile unsigned int *)DAQ_MBOX)[0];
//this is the time we need to sleep in order to synchronize with the hw (in multiples of DAQ_PERIOD)
if ((mbox_current>=120) && (mbox_target<30)) //handle the frame wrap-arround
diff2 = 150-mbox_current+mbox_target;
else if ((mbox_current<30) && (mbox_target>=120))
diff2 = -150+mbox_target-mbox_current;
else
diff2 = mbox_target - mbox_current;
if (diff2 <(-7)) {
LOG_D(HW,"UE Frame %d: missed slot, proceeding with next one (slot %d, hw_slot %d, diff %d)\n",frame, slot, hw_slot, diff2);
if (frame>0)
exit_fun("[HW][UE] missed slot");
slot++;
if (slot==20) {
slot=0;
frame++;
}
continue;
}
if (diff2>8)
LOG_D(HW,"UE Frame %d: skipped slot, waiting for hw to catch up (slot %d, hw_slot %d, mbox_current %d, mbox_target %d, diff %d)\n",frame, slot, hw_slot, mbox_current, mbox_target, diff2);
/*
if (frame%100==0)
LOG_D(HW,"frame %d (%d), slot %d, hw_slot %d, rx_offset_mbox %d, mbox_target %d, mbox_current %d, diff %d\n",frame, PHY_vars_UE_g[0]->frame, slot,hw_slot,rx_offset_mbox,mbox_target,mbox_current,diff2);
*/
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_DAQ_MBOX, *((volatile unsigned int *) openair0_exmimo_pci[card].rxcnt_ptr[0]));
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_DIFF, diff2);
delay_cnt = 0;
while ((diff2>0) && (!oai_exit) && (is_synchronized) )
{
time_in = rt_get_time_ns();
//LOG_D(HW,"eNB Frame %d delaycnt %d : hw_slot %d (%d), slot %d (%d), diff %d, time %llu\n",frame,delay_cnt,hw_slot,((volatile unsigned int *)DAQ_MBOX)[0],slot,mbox_target,diff2,time_in);
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_RT_SLEEP,1);
ret = rt_sleep_ns(diff2*DAQ_PERIOD);
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_RT_SLEEP,0);
if (ret)
LOG_D(HW,"eNB Frame %d, time %llu: rt_sleep_ns returned %d\n",frame, time_in);
hw_slot = (((((volatile unsigned int *)DAQ_MBOX)[0]+1)%150)<<1)/15;
//LOG_D(HW,"eNB Frame %d : hw_slot %d, time %llu\n",frame,hw_slot,rt_get_time_ns());
delay_cnt++;
if (delay_cnt == 30)
{
LOG_D(HW,"UE frame %d: HW stopped ... \n",frame);
exit_fun("[HW][UE] HW stopped");
}
mbox_current = ((volatile unsigned int *)DAQ_MBOX)[0];
if ((mbox_current>=135) && (mbox_target<15)) //handle the frame wrap-arround
diff2 = 150-mbox_current+mbox_target;
else if ((mbox_current<15) && (mbox_target>=135))
diff2 = -150+mbox_target-mbox_current;
else
diff2 = mbox_target - mbox_current;
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_DAQ_MBOX, *((volatile unsigned int *) openair0_exmimo_pci[card].rxcnt_ptr[0]));
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_DIFF, diff2);
}
}
last_slot = (slot)%LTE_SLOTS_PER_FRAME;
if (last_slot <0)
last_slot+=LTE_SLOTS_PER_FRAME;
next_slot = (slot+3)%LTE_SLOTS_PER_FRAME;
if (is_synchronized)
{
/*
if (frame%100==0)
LOG_D(HW,"frame %d (%d), slot %d, hw_slot %d, last_slot %d (before): DAQ_MBOX %d\n",frame, PHY_vars_UE_g[0]->frame, slot,hw_slot,last_slot,DAQ_MBOX[0]);
*/
// in = rt_get_time_ns();
phy_procedures_UE_lte (last_slot, next_slot, PHY_vars_UE_g[0], 0, 0,mode,0,NULL);
// out = rt_get_time_ns();
// diff = out-in;
/*
if (frame % 100 == 0)
LOG_D(HW,"hw_slot %d (after): DAQ_MBOX %d\n",hw_slot,DAQ_MBOX[0]);
LOG_D(HW,"Frame %d: last_slot %d, phy_procedures_lte_ue time_in %llu, time_out %llu, diff %llu\n",
frame, last_slot,in,out,diff);
*/
}
else // we are not yet synchronized
{
hw_slot_offset = 0;
slot = 0;
openair0_get_frame(card);
// LOG_D(HW,"after get_frame\n");
// rt_sleep_ns(FRAME_PERIOD);
// LOG_D(HW,"after sleep\n");
if (initial_sync(PHY_vars_UE_g[0],mode)==0) {
/*
lte_adjust_synch(&PHY_vars_UE_g[0]->lte_frame_parms,
PHY_vars_UE_g[0],
0,
1,
16384);
*/
//for better visualization afterwards
/*
for (aa=0; aa<PHY_vars_UE_g[0]->lte_frame_parms.nb_antennas_rx; aa++)
memset(PHY_vars_UE_g[0]->lte_ue_common_vars.rxdata[aa],0,
PHY_vars_UE_g[0]->lte_frame_parms.samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*sizeof(int));
*/
if (mode == rx_calib_ue) {
exit_fun("[HW][UE] UE in RX calibration mode");
}
else {
is_synchronized = 1;
//start the DMA transfers
//LOG_D(HW,"Before openair0_start_rt_acquisition \n");
openair0_start_rt_acquisition(card);
hw_slot_offset = (PHY_vars_UE_g[0]->rx_offset<<1) / PHY_vars_UE_g[0]->lte_frame_parms.samples_per_tti;
LOG_D(HW,"Got synch: hw_slot_offset %d\n",hw_slot_offset);
}
}
else {
if (openair_daq_vars.freq_offset >= 0) {
openair_daq_vars.freq_offset += 100;
openair_daq_vars.freq_offset *= -1;
}
else {
openair_daq_vars.freq_offset *= -1;
}
if (abs(openair_daq_vars.freq_offset) > 7500) {
LOG_I(PHY,"[initial_sync] No cell synchronization found, abondoning\n");
mac_xface->macphy_exit("");
}
else {
LOG_I(PHY,"[initial_sync] trying carrier off %d Hz\n",openair_daq_vars.freq_offset);
for (i=0; i<4; i++) {
if (p_exmimo_config->rf.rf_freq_rx[i])
p_exmimo_config->rf.rf_freq_rx[i] = carrier_freq[i]+openair_daq_vars.freq_offset;
if (p_exmimo_config->rf.rf_freq_tx[i])
p_exmimo_config->rf.rf_freq_tx[i] = carrier_freq[i]+openair_daq_vars.freq_offset;
}
openair0_dump_config(card);
rt_sleep_ns(FRAME_PERIOD);
}
}
}
/*
if ((slot%2000)<10)
LOG_D(HW,"fun0: doing very hard work\n");
*/
slot++;
if (slot==20) {
slot=0;
frame++;
}
#if defined(ENABLE_ITTI)
itti_update_lte_time(frame, slot);
#endif
}
LOG_D(HW,"UE_thread: finished, ran %d times.\n",frame);
#ifdef HARD_RT
rt_make_soft_real_time();
#endif
// clean task
#ifdef RTAI
rt_task_delete(task);
#endif
LOG_D(HW,"Task deleted. returning\n");
return 0;
}
static void get_options (int argc, char **argv)
{
int c;
char line[1000];
int l;
const Enb_properties_array_t *enb_properties;
enum long_option_e {
LONG_OPTION_START = 0x100, /* Start after regular single char options */
LONG_OPTION_CALIB_UE_RX,
LONG_OPTION_CALIB_UE_RX_MED,
LONG_OPTION_CALIB_UE_RX_BYP,
LONG_OPTION_DEBUG_UE_PRACH,
LONG_OPTION_NO_L2_CONNECT,
};
static const struct option long_options[] = {
{"calib-ue-rx", required_argument, NULL, LONG_OPTION_CALIB_UE_RX},
{"calib-ue-rx-med", required_argument, NULL, LONG_OPTION_CALIB_UE_RX_MED},
{"calib-ue-rx-byp", required_argument, NULL, LONG_OPTION_CALIB_UE_RX_BYP},
{"debug-ue-prach", no_argument, NULL, LONG_OPTION_DEBUG_UE_PRACH},
{"no-L2-connect", no_argument, NULL, LONG_OPTION_NO_L2_CONNECT},
{NULL, 0, NULL, 0}};
while ((c = getopt_long (argc, argv, "C:dF:K:qO:ST:UV",long_options,NULL)) != -1)
{
switch (c)
{
case LONG_OPTION_CALIB_UE_RX:
mode = rx_calib_ue;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA max), input level %d dBm\n",rx_input_level_dBm);
break;
case LONG_OPTION_CALIB_UE_RX_MED:
mode = rx_calib_ue_med;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA med), input level %d dBm\n",rx_input_level_dBm);
break;
case LONG_OPTION_CALIB_UE_RX_BYP:
mode = rx_calib_ue_byp;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA byp), input level %d dBm\n",rx_input_level_dBm);
break;
case LONG_OPTION_DEBUG_UE_PRACH:
mode = debug_prach;
break;
case LONG_OPTION_NO_L2_CONNECT:
mode = no_L2_connect;
break;
case 'C':
downlink_frequency[0] = atof(optarg); // Use float to avoid issue with frequency over 2^31.
downlink_frequency[1] = downlink_frequency[0];
downlink_frequency[2] = downlink_frequency[0];
downlink_frequency[3] = downlink_frequency[0];
carrier_freq[0] = downlink_frequency[0];
carrier_freq[1] = downlink_frequency[1];
carrier_freq[2] = downlink_frequency[2];
carrier_freq[3] = downlink_frequency[3];
printf("Downlink frequency set to %u\n", downlink_frequency[0]);
break;
case 'd':
#ifdef XFORMS
do_forms=1;
#endif
break;
case 'F':
sprintf(rxg_fname,"%srxg.lime",optarg);
rxg_fd = fopen(rxg_fname,"r");
if (rxg_fd) {
printf("Loading RX Gain parameters from %s\n",rxg_fname);
l=0;
while (fgets(line, sizeof(line), rxg_fd)) {
if ((strlen(line)==0) || (*line == '#')) continue; //ignore empty or comment lines
else {
if (l==0) sscanf(line,"%d %d %d %d",&rxg_max[0],&rxg_max[1],&rxg_max[2],&rxg_max[3]);
if (l==1) sscanf(line,"%d %d %d %d",&rxg_med[0],&rxg_med[1],&rxg_med[2],&rxg_med[3]);
if (l==2) sscanf(line,"%d %d %d %d",&rxg_byp[0],&rxg_byp[1],&rxg_byp[2],&rxg_byp[3]);
l++;
}
}
}
else
printf("%s not found, running with defaults\n",rxg_fname);
sprintf(txg_fname,"%stxg.lime",optarg);
txg_fd = fopen(txg_fname,"r");
if (txg_fd) {
printf("Loading TX Gain parameters from %s\n",txg_fname);
l=0;
while (fgets(line, sizeof(line), txg_fd)) {
if ((strlen(line)==0) || (*line == '#')) {
continue; //ignore empty or comment lines
}
else {
if (l==0) sscanf(line,"%d %d %d %d",&txgain[0],&txgain[1],&txgain[2],&txgain[3]);
if (l==1) sscanf(line,"%d",&tx_max_power);
l++;
}
}
}
else
printf("%s not found, running with defaults\n",txg_fname);
sprintf(rflo_fname,"%srflo.lime",optarg);
rflo_fd = fopen(rflo_fname,"r");
if (rflo_fd) {
printf("Loading RF LO parameters from %s\n",rflo_fname);
if (fscanf(rflo_fd,"%d %d %d %d",&rf_local[0],&rf_local[1],&rf_local[2],&rf_local[3]) < 4)
LOG_E(EMU, "Error parsing \"%s\"", rflo_fname);
}
else
printf("%s not found, running with defaults\n",rflo_fname);
sprintf(rfdc_fname,"%srfdc.lime",optarg);
rfdc_fd = fopen(rfdc_fname,"r");
if (rfdc_fd) {
printf("Loading RF DC parameters from %s\n",rfdc_fname);
if (fscanf(rfdc_fd,"%d %d %d %d",&rf_rxdc[0],&rf_rxdc[1],&rf_rxdc[2],&rf_rxdc[3]) < 4)
LOG_E(EMU, "Error parsing \"%s\"", rfdc_fname);
}
else
printf("%s not found, running with defaults\n",rfdc_fname);
break;
case 'K':
#if defined(ENABLE_ITTI)
itti_dump_file = strdup(optarg);
#else
printf("-K option is disabled when ENABLE_ITTI is not defined\n");
#endif
break;
case 'O':
conf_config_file_name = optarg;
break;
case 'S':
fs4_test=1;
break;
case 'T':
#ifdef ENABLE_TCXO
tcxo=atoi(optarg);
#endif
break;
case 'U':
UE_flag = 1;
break;
case 'V':
ouput_vcd = 1;
break;
/* case 'q':
opp_enabled = 1;
break;
*/
default:
break;
}
}
if ((UE_flag == 0) && (conf_config_file_name != NULL)) {
int i;
NB_eNB_INST = 1;
/* Read eNB configuration file */
enb_properties = enb_config_init(conf_config_file_name);
AssertFatal (NB_eNB_INST <= enb_properties->number,
"Number of eNB is greater than eNB defined in configuration file %s (%d/%d)!",
conf_config_file_name, NB_eNB_INST, enb_properties->number);
/* Update some simulation parameters */
frame_parms->frame_type = enb_properties->properties[0]->frame_type;
frame_parms->tdd_config = enb_properties->properties[0]->tdd_config;
frame_parms->tdd_config_S = enb_properties->properties[0]->tdd_config_s;
for (i = 0 ; i < (sizeof(downlink_frequency) / sizeof (downlink_frequency[0])); i++) {
downlink_frequency[i] = enb_properties->properties[0]->downlink_frequency;
uplink_frequency_offset[i] = enb_properties->properties[0]->uplink_frequency_offset;
}
}
}
int main(int argc, char **argv) {
#ifdef RTAI
// RT_TASK *task;
#endif
int i,j,aa;
#if defined (XFORMS) || defined (EMOS) || (! defined (RTAI))
void *status;
#endif
uint16_t Nid_cell = 0;
uint8_t cooperation_flag=0, transmission_mode=1, abstraction_flag=0;
#ifndef OPENAIR2
uint8_t beta_ACK=0,beta_RI=0,beta_CQI=2;
#endif
#ifdef ENABLE_TCXO
unsigned int tcxo = 114;
#endif
int amp;
// uint8_t prach_fmt;
// int N_ZC;
int ret, ant;
int ant_offset=0;
#if defined (EMOS) || (! defined (RTAI))
int error_code;
#endif
mode = normal_txrx;
frame_parms = (LTE_DL_FRAME_PARMS*) malloc(sizeof(LTE_DL_FRAME_PARMS));
/* Set some default values that may be overwritten while reading options */
frame_parms->frame_type = 1; /* TDD */
frame_parms->tdd_config = 3;
frame_parms->tdd_config_S = 0;
get_options (argc, argv); //Command-line options
//randominit (0);
set_taus_seed (0);
// initialize the log (see log.h for details)
logInit();
set_glog(LOG_WARNING, LOG_MED);
if (UE_flag==1)
{
printf("configuring for UE\n");
set_comp_log(HW, LOG_DEBUG, LOG_HIGH, 1);
#ifdef OPENAIR2
set_comp_log(PHY, LOG_INFO, LOG_HIGH, 1);
#else
set_comp_log(PHY, LOG_INFO, LOG_HIGH, 1);
#endif
set_comp_log(MAC, LOG_INFO, LOG_HIGH, 1);
set_comp_log(RLC, LOG_INFO, LOG_HIGH, 1);
set_comp_log(PDCP, LOG_INFO, LOG_HIGH, 1);
set_comp_log(OTG, LOG_INFO, LOG_HIGH, 1);
set_comp_log(RRC, LOG_INFO, LOG_HIGH, 1);
#if defined(ENABLE_ITTI)
set_comp_log(EMU, LOG_INFO, LOG_MED, 1);
# if defined(ENABLE_USE_MME)
set_comp_log(NAS, LOG_INFO, LOG_HIGH, 1);
# endif
#endif
}
else
{
printf("configuring for eNB\n");
set_comp_log(HW, LOG_DEBUG, LOG_HIGH, 1);
#ifdef OPENAIR2
set_comp_log(PHY, LOG_INFO, LOG_HIGH, 1);
#else
set_comp_log(PHY, LOG_INFO, LOG_HIGH, 1);
#endif
set_comp_log(MAC, LOG_INFO, LOG_HIGH, 1);
set_comp_log(RLC, LOG_INFO, LOG_HIGH, 1);
set_comp_log(PDCP, LOG_INFO, LOG_HIGH, 1);
set_comp_log(OTG, LOG_INFO, LOG_HIGH, 1);
set_comp_log(RRC, LOG_INFO, LOG_HIGH, 1);
#if defined(ENABLE_ITTI)
set_comp_log(EMU, LOG_INFO, LOG_MED, 1);
# if defined(ENABLE_USE_MME)
set_comp_log(S1AP, LOG_INFO, LOG_HIGH, 1);
set_comp_log(SCTP, LOG_INFO, LOG_HIGH, 1);
# endif
#endif
set_comp_log(ENB_APP, LOG_INFO, LOG_HIGH, 1);;
}
if (ouput_vcd) {
if (UE_flag==1)
vcd_signal_dumper_init("/tmp/openair_dump_UE.vcd");
else
vcd_signal_dumper_init("/tmp/openair_dump_eNB.vcd");
}
#if defined(ENABLE_ITTI)
if (UE_flag == 1) {
log_set_instance_type (LOG_INSTANCE_UE);
}
else {
log_set_instance_type (LOG_INSTANCE_ENB);
}
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info, messages_definition_xml, itti_dump_file);
#endif
#ifdef NAS_NETLINK
netlink_init();
#endif
#if !defined(ENABLE_ITTI)
// to make a graceful exit when ctrl-c is pressed
signal(SIGSEGV, signal_handler);
signal(SIGINT, signal_handler);
#endif
#ifndef RTAI
check_clock();
#endif
// init the parameters
frame_parms->N_RB_DL = 25;
frame_parms->N_RB_UL = 25;
frame_parms->Ncp = 0;
frame_parms->Ncp_UL = 0;
frame_parms->Nid_cell = Nid_cell;
frame_parms->nushift = 0;
if (UE_flag==0)
{
switch (transmission_mode) {
case 1:
frame_parms->nb_antennas_tx = 1;
frame_parms->nb_antennas_rx = 1;
break;
case 2:
case 5:
case 6:
frame_parms->nb_antennas_tx = 2;
frame_parms->nb_antennas_rx = 2;
break;
default:
printf("Unsupported transmission mode %d\n",transmission_mode);
exit(-1);
}
}
else
{ //UE_flag==1
frame_parms->nb_antennas_tx = 1;
frame_parms->nb_antennas_rx = 1;
}
frame_parms->nb_antennas_tx_eNB = (transmission_mode == 1) ? 1 : 2; //initial value overwritten by initial sync later
frame_parms->mode1_flag = (transmission_mode == 1) ? 1 : 0;
frame_parms->phich_config_common.phich_resource = oneSixth;
frame_parms->phich_config_common.phich_duration = normal;
// UL RS Config
frame_parms->pusch_config_common.ul_ReferenceSignalsPUSCH.cyclicShift = 0;//n_DMRS1 set to 0
frame_parms->pusch_config_common.ul_ReferenceSignalsPUSCH.groupHoppingEnabled = 0;
frame_parms->pusch_config_common.ul_ReferenceSignalsPUSCH.sequenceHoppingEnabled = 0;
frame_parms->pusch_config_common.ul_ReferenceSignalsPUSCH.groupAssignmentPUSCH = 0;
init_ul_hopping(frame_parms);
init_frame_parms(frame_parms,1);
phy_init_top(frame_parms);
phy_init_lte_top(frame_parms);
//init prach for openair1 test
frame_parms->prach_config_common.rootSequenceIndex=22;
frame_parms->prach_config_common.prach_ConfigInfo.zeroCorrelationZoneConfig=1;
frame_parms->prach_config_common.prach_ConfigInfo.prach_ConfigIndex=0;
frame_parms->prach_config_common.prach_ConfigInfo.highSpeedFlag=0;
frame_parms->prach_config_common.prach_ConfigInfo.prach_FreqOffset=0;
// prach_fmt = get_prach_fmt(frame_parms->prach_config_common.prach_ConfigInfo.prach_ConfigIndex, frame_parms->frame_type);
// N_ZC = (prach_fmt <4)?839:139;
if (UE_flag==1)
{
PHY_vars_UE_g = malloc(sizeof(PHY_VARS_UE*));
PHY_vars_UE_g[0] = init_lte_UE(frame_parms, UE_id,abstraction_flag,transmission_mode);
#ifndef OPENAIR2
for (i=0;i<NUMBER_OF_eNB_MAX;i++) {
PHY_vars_UE_g[0]->pusch_config_dedicated[i].betaOffset_ACK_Index = beta_ACK;
PHY_vars_UE_g[0]->pusch_config_dedicated[i].betaOffset_RI_Index = beta_RI;
PHY_vars_UE_g[0]->pusch_config_dedicated[i].betaOffset_CQI_Index = beta_CQI;
PHY_vars_UE_g[0]->scheduling_request_config[i].sr_PUCCH_ResourceIndex = UE_id;
PHY_vars_UE_g[0]->scheduling_request_config[i].sr_ConfigIndex = 7+(UE_id%3);
PHY_vars_UE_g[0]->scheduling_request_config[i].dsr_TransMax = sr_n4;
}
#endif
compute_prach_seq(&PHY_vars_UE_g[0]->lte_frame_parms.prach_config_common,
PHY_vars_UE_g[0]->lte_frame_parms.frame_type,
PHY_vars_UE_g[0]->X_u);
PHY_vars_UE_g[0]->lte_ue_pdcch_vars[0]->crnti = 0x1234;
#ifndef OPENAIR2
PHY_vars_UE_g[0]->lte_ue_pdcch_vars[0]->crnti = 0x1235;
#endif
NB_UE_INST=1;
NB_INST=1;
openair_daq_vars.manual_timing_advance = 0;
//openair_daq_vars.timing_advance = TIMING_ADVANCE_HW;
openair_daq_vars.rx_gain_mode = DAQ_AGC_ON;
openair_daq_vars.auto_freq_correction = 0;
openair_daq_vars.use_ia_receiver = 0;
// if AGC is off, the following values will be used
for (i=0;i<4;i++)
rxgain[i] = 0;
for (i=0;i<4;i++) {
PHY_vars_UE_g[0]->rx_gain_max[i] = rxg_max[i];
PHY_vars_UE_g[0]->rx_gain_med[i] = rxg_med[i];
PHY_vars_UE_g[0]->rx_gain_byp[i] = rxg_byp[i];
}
if ((mode == normal_txrx) || (mode == rx_calib_ue) || (mode == no_L2_connect) || (mode == debug_prach)) {
for (i=0; i<4; i++) {
PHY_vars_UE_g[0]->rx_gain_mode[i] = max_gain;
// frame_parms->rfmode[i] = rf_mode_max[i];
rf_mode[i] = (rf_mode[i] & (~LNAGAINMASK)) | LNAMax;
}
PHY_vars_UE_g[0]->rx_total_gain_dB = PHY_vars_UE_g[0]->rx_gain_max[0] + rxgain[0] - 30; //-30 because it was calibrated with a 30dB gain
}
else if ((mode == rx_calib_ue_med)) {
for (i=0; i<4; i++) {
PHY_vars_UE_g[0]->rx_gain_mode[i] = med_gain;
// frame_parms->rfmode[i] = rf_mode_med[i];
rf_mode[i] = (rf_mode[i] & (~LNAGAINMASK)) | LNAMed;
}
PHY_vars_UE_g[0]->rx_total_gain_dB = PHY_vars_UE_g[0]->rx_gain_med[0] + rxgain[0] - 30; //-30 because it was calibrated with a 30dB gain;
}
else if ((mode == rx_calib_ue_byp)) {
for (i=0; i<4; i++) {
PHY_vars_UE_g[0]->rx_gain_mode[i] = byp_gain;
// frame_parms->rfmode[i] = rf_mode_byp[i];
rf_mode[i] = (rf_mode[i] & (~LNAGAINMASK)) | LNAByp;
}
PHY_vars_UE_g[0]->rx_total_gain_dB = PHY_vars_UE_g[0]->rx_gain_byp[0] + rxgain[0] - 30; //-30 because it was calibrated with a 30dB gain;
}
PHY_vars_UE_g[0]->tx_power_max_dBm = tx_max_power;
// printf("tx_max_power = %d -> amp %d\n",tx_max_power,get_tx_amp(tx_max_power,tx_max_power));
}
else
{ //this is eNB
PHY_vars_eNB_g = malloc(sizeof(PHY_VARS_eNB*));
PHY_vars_eNB_g[0] = init_lte_eNB(frame_parms,eNB_id,Nid_cell,cooperation_flag,transmission_mode,abstraction_flag);
#ifndef OPENAIR2
for (i=0;i<NUMBER_OF_UE_MAX;i++) {
PHY_vars_eNB_g[0]->pusch_config_dedicated[i].betaOffset_ACK_Index = beta_ACK;
PHY_vars_eNB_g[0]->pusch_config_dedicated[i].betaOffset_RI_Index = beta_RI;
PHY_vars_eNB_g[0]->pusch_config_dedicated[i].betaOffset_CQI_Index = beta_CQI;
PHY_vars_eNB_g[0]->scheduling_request_config[i].sr_PUCCH_ResourceIndex = i;
PHY_vars_eNB_g[0]->scheduling_request_config[i].sr_ConfigIndex = 7+(i%3);
PHY_vars_eNB_g[0]->scheduling_request_config[i].dsr_TransMax = sr_n4;
}
#endif
compute_prach_seq(&PHY_vars_eNB_g[0]->lte_frame_parms.prach_config_common,
PHY_vars_eNB_g[0]->lte_frame_parms.frame_type,
PHY_vars_eNB_g[0]->X_u);
NB_eNB_INST=1;
NB_INST=1;
openair_daq_vars.ue_dl_rb_alloc=0x1fff;
openair_daq_vars.target_ue_dl_mcs=20;
openair_daq_vars.ue_ul_nb_rb=6;
openair_daq_vars.target_ue_ul_mcs=6;
// if AGC is off, the following values will be used
for (i=0;i<4;i++)
rxgain[i]=10;
// set eNB to max gain
PHY_vars_eNB_g[0]->rx_total_gain_eNB_dB = rxg_max[0] + rxgain[0] - 30; //was measured at rxgain=30;
for (i=0; i<4; i++) {
// frame_parms->rfmode[i] = rf_mode_max[i];
rf_mode[i] = (rf_mode[i] & (~LNAGAINMASK)) | LNAMax;
}
}
// Initialize card
ret = openair0_open();
if ( ret != 0 ) {
if (ret == -1)
printf("Error opening /dev/openair0");
if (ret == -2)
printf("Error mapping bigshm");
if (ret == -3)
printf("Error mapping RX or TX buffer");
return(ret);
}
printf ("Detected %d number of cards, %d number of antennas.\n", openair0_num_detected_cards, openair0_num_antennas[card]);
p_exmimo_config = openair0_exmimo_pci[card].exmimo_config_ptr;
p_exmimo_id = openair0_exmimo_pci[card].exmimo_id_ptr;
printf("Card %d: ExpressMIMO %d, HW Rev %d, SW Rev 0x%d\n", card, p_exmimo_id->board_exmimoversion, p_exmimo_id->board_hwrev, p_exmimo_id->board_swrev);
// check if the software matches firmware
if (p_exmimo_id->board_swrev!=BOARD_SWREV_CNTL2) {
printf("Software revision %d and firmware revision %d do not match. Please update either the firmware or the software!\n",BOARD_SWREV_CNTL2,p_exmimo_id->board_swrev);
exit(-1);
}
if (p_exmimo_id->board_swrev>=9)
p_exmimo_config->framing.eNB_flag = 0;
else
p_exmimo_config->framing.eNB_flag = !UE_flag;
p_exmimo_config->framing.tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_LSB;
#if (BOARD_SWREV_CNTL2>=0x0A)
p_exmimo_config->framing.resampling_factor[ant] = 2;
#else
for (ant=0; ant<4; ant++)
p_exmimo_config->framing.resampling_factor = 2;
#endif
for (ant=0;ant<max(frame_parms->nb_antennas_tx,frame_parms->nb_antennas_rx);ant++)
p_exmimo_config->rf.rf_mode[ant] = RF_MODE_BASE;
for (ant=0;ant<frame_parms->nb_antennas_tx;ant++)
p_exmimo_config->rf.rf_mode[ant] += (TXEN + DMAMODE_TX);
for (ant=0;ant<frame_parms->nb_antennas_rx;ant++)
p_exmimo_config->rf.rf_mode[ant] += (RXEN + DMAMODE_RX);
for (ant=max(frame_parms->nb_antennas_tx,frame_parms->nb_antennas_rx);ant<4;ant++) {
p_exmimo_config->rf.rf_mode[ant] = 0;
carrier_freq[ant] = 0; //this turns off all other LIMEs
downlink_frequency[ant] = 0; //this turns off all other LIMEs
uplink_frequency_offset[ant] = 0;
}
/*
ant_offset = 0;
for (ant=0; ant<4; ant++) {
if (ant==ant_offset) {
//if (1) {
p_exmimo_config->rf.rf_mode[ant] = rf_mode_base;
p_exmimo_config->rf.rf_mode[ant] += (TXEN + DMAMODE_TX);
p_exmimo_config->rf.rf_mode[ant] += (RXEN + DMAMODE_RX);
}
else {
p_exmimo_config->rf.rf_mode[ant] = 0;
downlink_frequency[ant] = 0; //this turns off all other LIMEs
}
}
*/
for (ant = 0; ant<4; ant++) {
p_exmimo_config->rf.do_autocal[ant] = 1;
if (UE_flag==0) {
/* eNB */
if (frame_parms->frame_type == FDD) {
p_exmimo_config->rf.rf_freq_rx[ant] = downlink_frequency[ant] + uplink_frequency_offset[ant];
} else {
p_exmimo_config->rf.rf_freq_rx[ant] = downlink_frequency[ant];
}
p_exmimo_config->rf.rf_freq_tx[ant] = downlink_frequency[ant];
} else {
/* UE */
p_exmimo_config->rf.rf_freq_rx[ant] = carrier_freq[ant];
if (frame_parms->frame_type == FDD) {
p_exmimo_config->rf.rf_freq_tx[ant] = carrier_freq[ant] + uplink_frequency_offset[ant];
} else {
p_exmimo_config->rf.rf_freq_tx[ant] = carrier_freq[ant];
}
}
p_exmimo_config->rf.rx_gain[ant][0] = rxgain[ant];
p_exmimo_config->rf.tx_gain[ant][0] = txgain[ant];
p_exmimo_config->rf.rf_local[ant] = rf_local[ant];
p_exmimo_config->rf.rf_rxdc[ant] = rf_rxdc[ant];
if ((downlink_frequency[ant] >= 850000000) && (downlink_frequency[ant] <= 865000000)) {
p_exmimo_config->rf.rf_vcocal[ant] = rf_vcocal_850[ant];
p_exmimo_config->rf.rffe_band_mode[ant] = DD_TDD;
}
else if ((downlink_frequency[ant] >= 1900000000) && (downlink_frequency[ant] <= 2000000000)) {
p_exmimo_config->rf.rf_vcocal[ant] = rf_vcocal[ant];
p_exmimo_config->rf.rffe_band_mode[ant] = B19G_TDD;
}
else {
p_exmimo_config->rf.rf_vcocal[ant] = rf_vcocal[ant];
p_exmimo_config->rf.rffe_band_mode[ant] = 0;
}
p_exmimo_config->rf.rffe_gain_txlow[ant] = 31;
p_exmimo_config->rf.rffe_gain_txhigh[ant] = 31;
p_exmimo_config->rf.rffe_gain_rxfinal[ant] = 52;
p_exmimo_config->rf.rffe_gain_rxlow[ant] = 31;
}
dump_frame_parms(frame_parms);
mac_xface = malloc(sizeof(MAC_xface));
#ifdef OPENAIR2
int eMBMS_active=0;
l2_init(frame_parms,eMBMS_active,
0,// cba_group_active
0); // HO flag
if (UE_flag == 1)
mac_xface->dl_phy_sync_success (0, 0, 0, 1);
else
mac_xface->mrbch_phy_sync_failure (0, 0, 0);
#endif
mac_xface->macphy_exit = &exit_fun;
#if defined(ENABLE_ITTI)
if (create_tasks(UE_flag ? 0 : 1, UE_flag ? 1 : 0) < 0) {
exit(-1); // need a softer mode
}
printf("ITTI tasks created\n");
#endif
#ifdef OPENAIR2
//if (otg_enabled) {
init_all_otg(0);
g_otg->seed = 0;
init_seeds(g_otg->seed);
g_otg->num_nodes = 2;
for (i=0; i<g_otg->num_nodes; i++){
for (j=0; j<g_otg->num_nodes; j++){
g_otg->application_idx[i][j] = 1;
//g_otg->packet_gen_type=SUBSTRACT_STRING;
g_otg->aggregation_level[i][j][0]=1;
g_otg->application_type[i][j][0] = BCBR; //MCBR, BCBR
}
}
init_predef_traffic(UE_flag ? 1 : 0, UE_flag ? 0 : 1);
// }
#endif
#ifdef OPENAIR2
//init_pdcp_thread();
#endif
number_of_cards = openair0_num_detected_cards;
if (p_exmimo_id->board_exmimoversion==1) //ExpressMIMO1
openair_daq_vars.timing_advance = 138;
else //ExpressMIMO2
openair_daq_vars.timing_advance = 0;
// connect the TX/RX buffers
if (UE_flag==1)
{
setup_ue_buffers(PHY_vars_UE_g[0],frame_parms,ant_offset);
printf("Setting UE buffer to all-RX\n");
// Set LSBs for antenna switch (ExpressMIMO)
for (i=0; i<frame_parms->samples_per_tti*10; i++)
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++)
PHY_vars_UE_g[0]->lte_ue_common_vars.txdata[aa][i] = 0x00010001;
//p_exmimo_config->framing.tdd_config = TXRXSWITCH_TESTRX;
}
else
{
setup_eNB_buffers(PHY_vars_eNB_g[0],frame_parms,ant_offset);
if (fs4_test==0)
{
printf("Setting eNB buffer to all-RX\n");
// Set LSBs for antenna switch (ExpressMIMO)
for (i=0; i<frame_parms->samples_per_tti*10; i++)
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++)
PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa][i] = 0x00010001;
// Set the last OFDM symbol of subframe 4 to TX to allow enough time for switch to settle
// (that's ok since the last symbol can be configured as SRS)
/*
for (i=frame_parms->samples_per_tti*5-0*(frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples);
i<frame_parms->samples_per_tti*5; i++)
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++)
PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa][i] = 0x0;
*/
}
else
{
printf("Setting eNB buffer to fs/4 test signal\n");
for (j=0; j<PHY_vars_eNB_g[0]->lte_frame_parms.samples_per_tti*10; j+=4)
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++)
{
amp = 0x8000;
((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+1] = 0;
((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+3] = amp-1;
((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+5] = 0;
((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+7] = amp;
((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j] = amp-1;
((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+2] = 0;
((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+4] = amp;
((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+6] = 0;
}
}
}
openair0_dump_config(card);
printf("EXMIMO_CONFIG: rf_mode 0x %x %x %x %x, [0]: TXRXEn %d, TXLPFEn %d, TXLPF %d, RXLPFEn %d, RXLPF %d, RFBB %d, LNA %d, LNAGain %d, RXLPFMode %d, SWITCH %d, rf_rxdc %d, rf_local %d, rf_vcocal %d\n",
p_exmimo_config->rf.rf_mode[0],
p_exmimo_config->rf.rf_mode[1],
p_exmimo_config->rf.rf_mode[2],
p_exmimo_config->rf.rf_mode[3],
(p_exmimo_config->rf.rf_mode[0]&3), // RXen+TXen
(p_exmimo_config->rf.rf_mode[0]&4)>>2, //TXLPFen
(p_exmimo_config->rf.rf_mode[0]&TXLPFMASK)>>3, //TXLPF
(p_exmimo_config->rf.rf_mode[0]&128)>>7, //RXLPFen
(p_exmimo_config->rf.rf_mode[0]&RXLPFMASK)>>8, //TXLPF
(p_exmimo_config->rf.rf_mode[0]&RFBBMASK)>>16, // RFBB mode
(p_exmimo_config->rf.rf_mode[0]&LNAMASK)>>12, // RFBB mode
(p_exmimo_config->rf.rf_mode[0]&LNAGAINMASK)>>14, // RFBB mode
(p_exmimo_config->rf.rf_mode[0]&RXLPFMODEMASK)>>19, // RXLPF mode
(p_exmimo_config->framing.tdd_config&TXRXSWITCH_MASK)>>1, // Switch mode
p_exmimo_config->rf.rf_rxdc[0],
p_exmimo_config->rf.rf_local[0],
p_exmimo_config->rf.rf_vcocal[0]);
for (ant=0;ant<4;ant++)
p_exmimo_config->rf.do_autocal[ant] = 0;
#ifdef EMOS
error_code = rtf_create(CHANSOUNDER_FIFO_MINOR,CHANSOUNDER_FIFO_SIZE);
if (error_code==0)
printf("[OPENAIR][SCHED][INIT] Created EMOS FIFO %d\n",CHANSOUNDER_FIFO_MINOR);
else if (error_code==ENODEV)
printf("[OPENAIR][SCHED][INIT] Problem: EMOS FIFO %d is greater than or equal to RTF_NO\n",CHANSOUNDER_FIFO_MINOR);
else if (error_code==ENOMEM)
printf("[OPENAIR][SCHED][INIT] Problem: cannot allocate memory for EMOS FIFO %d\n",CHANSOUNDER_FIFO_MINOR);
else
printf("[OPENAIR][SCHED][INIT] Problem creating EMOS FIFO %d, error_code %d\n",CHANSOUNDER_FIFO_MINOR,error_code);
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
#ifdef RTAI
// make main thread LXRT soft realtime
/* task = */ rt_task_init_schmod(nam2num("MYTASK"), 9, 0, 0, SCHED_FIFO, 0xF);
// start realtime timer and scheduler
//rt_set_oneshot_mode();
rt_set_periodic_mode();
start_rt_timer(0);
//now = rt_get_time() + 10*PERIOD;
//rt_task_make_periodic(task, now, PERIOD);
printf("Init mutex\n");
//mutex = rt_get_adr(nam2num("MUTEX"));
mutex = rt_sem_init(nam2num("MUTEX"), 1);
if (mutex==0)
{
printf("Error init mutex\n");
exit(-1);
}
else
printf("mutex=%p\n",mutex);
#endif
DAQ_MBOX = (volatile unsigned int *) openair0_exmimo_pci[card].rxcnt_ptr[0];
// this starts the DMA transfers
if (UE_flag!=1)
openair0_start_rt_acquisition(card);
#ifdef XFORMS
if (do_forms==1) {
fl_initialize (&argc, argv, NULL, 0, 0);
form_stats = create_form_stats_form();
if (UE_flag==1) {
form_ue[UE_id] = create_lte_phy_scope_ue();
sprintf (title, "LTE DL SCOPE UE");
fl_show_form (form_ue[UE_id]->lte_phy_scope_ue, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
} else {
for(UE_id=0;UE_id<scope_enb_num_ue;UE_id++) {
form_enb[UE_id] = create_lte_phy_scope_enb();
sprintf (title, "UE%d LTE UL SCOPE eNB",UE_id+1);
fl_show_form (form_enb[UE_id]->lte_phy_scope_enb, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
}
}
fl_show_form (form_stats->stats_form, FL_PLACE_HOTSPOT, FL_FULLBORDER, "stats");
if (UE_flag==0) {
for (UE_id=0;UE_id<scope_enb_num_ue;UE_id++) {
if (otg_enabled) {
fl_set_button(form_enb[UE_id]->button_0,1);
fl_set_object_label(form_enb[UE_id]->button_0,"DL Traffic ON");
}
else {
fl_set_button(form_enb[UE_id]->button_0,0);
fl_set_object_label(form_enb[UE_id]->button_0,"DL Traffic OFF");
}
}
}
else {
if (openair_daq_vars.use_ia_receiver) {
fl_set_button(form_ue[UE_id]->button_0,1);
fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver ON");
}
else {
fl_set_button(form_ue[UE_id]->button_0,0);
fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver OFF");
}
}
ret = pthread_create(&thread2, NULL, scope_thread, NULL);
printf("Scope thread created, ret=%d\n",ret);
}
#endif
#ifdef EMOS
ret = pthread_create(&thread3, NULL, emos_thread, NULL);
printf("EMOS thread created, ret=%d\n",ret);
#endif
rt_sleep_ns(10*FRAME_PERIOD);
#ifndef RTAI
pthread_attr_init (&attr_dlsch_threads);
pthread_attr_setstacksize(&attr_dlsch_threads,OPENAIR_THREAD_STACK_SIZE);
//attr_dlsch_threads.priority = 1;
sched_param_dlsch.sched_priority = sched_get_priority_max(SCHED_FIFO); //OPENAIR_THREAD_PRIORITY;
pthread_attr_setschedparam (&attr_dlsch_threads, &sched_param_dlsch);
pthread_attr_setschedpolicy (&attr_dlsch_threads, SCHED_FIFO);
#endif
// start the main thread
if (UE_flag == 1) {
#ifdef RTAI
thread1 = rt_thread_create(UE_thread, NULL, 100000000);
#else
error_code = pthread_create(&thread1, &attr_dlsch_threads, UE_thread, NULL);
if (error_code!= 0) {
LOG_D(HW,"[lte-softmodem.c] Could not allocate UE_thread, error %d\n",error_code);
return(error_code);
}
else {
LOG_D(HW,"[lte-softmodem.c] Allocate UE_thread successful\n");
}
#endif
#ifdef DLSCH_THREAD
init_rx_pdsch_thread();
rt_sleep_ns(FRAME_PERIOD/10);
init_dlsch_threads();
#endif
printf("UE threads created\n");
}
else {
#ifdef RTAI
thread0 = rt_thread_create(eNB_thread, NULL, 100000000);
#else
error_code = pthread_create(&thread0, &attr_dlsch_threads, eNB_thread, NULL);
if (error_code!= 0) {
LOG_D(HW,"[lte-softmodem.c] Could not allocate eNB_thread, error %d\n",error_code);
return(error_code);
}
else {
LOG_D(HW,"[lte-softmodem.c] Allocate eNB_thread successful\n");
}
#endif
#ifdef ULSCH_THREAD
init_ulsch_threads();
#endif
printf("eNB threads created\n");
}
// wait for end of program
printf("TYPE <CTRL-C> TO TERMINATE\n");
//getchar();
#if defined(ENABLE_ITTI)
printf("Entering ITTI signals handler\n");
itti_wait_tasks_end();
#else
while (oai_exit==0)
rt_sleep_ns(FRAME_PERIOD);
#endif
// stop threads
#ifdef XFORMS
printf("waiting for XFORMS thread\n");
if (do_forms==1)
{
pthread_join(thread2,&status);
fl_hide_form(form_stats->stats_form);
fl_free_form(form_stats->stats_form);
if (UE_flag==1) {
fl_hide_form(form_ue[UE_id]->lte_phy_scope_ue);
fl_free_form(form_ue[UE_id]->lte_phy_scope_ue);
} else {
for(UE_id=0;UE_id<scope_enb_num_ue;UE_id++) {
fl_hide_form(form_enb[UE_id]->lte_phy_scope_enb);
fl_free_form(form_enb[UE_id]->lte_phy_scope_enb);
}
}
}
#endif
printf("stopping MODEM threads\n");
// cleanup
if (UE_flag == 1) {
#ifdef RTAI
rt_thread_join(thread1);
#else
pthread_join(thread1,&status);
#endif
#ifdef DLSCH_THREAD
cleanup_dlsch_threads();
cleanup_rx_pdsch_thread();
#endif
}
else {
#ifdef RTAI
rt_thread_join(thread0);
#else
pthread_join(thread0,&status);
#endif
#ifdef ULSCH_THREAD
cleanup_ulsch_threads();
#endif
}
#ifdef OPENAIR2
//cleanup_pdcp_thread();
#endif
#ifdef RTAI
stop_rt_timer();
#endif
printf("stopping card\n");
openair0_stop(card);
printf("closing openair0_lib\n");
openair0_close();
#ifdef EMOS
printf("waiting for EMOS thread\n");
pthread_cancel(thread3);
pthread_join(thread3,&status);
#endif
#ifdef EMOS
error_code = rtf_destroy(CHANSOUNDER_FIFO_MINOR);
printf("[OPENAIR][SCHED][CLEANUP] EMOS FIFO closed, error_code %d\n", error_code);
#endif
if (ouput_vcd)
vcd_signal_dumper_close();
logClean();
return 0;
}
void test_config(int card, int ant, unsigned int rf_mode, int UE_flag) {
p_exmimo_config->framing.eNB_flag = !UE_flag;
p_exmimo_config->framing.tdd_config = 0;
#if (BOARD_SWREV_CNTL2>=0x0A)
p_exmimo_config->framing.resampling_factor[ant] = 2;
#else
p_exmimo_config->framing.resampling_factor = 2;
#endif
p_exmimo_config->rf.rf_freq_rx[ant] = 1907600000;
p_exmimo_config->rf.rf_freq_tx[ant] = 1907600000;;
p_exmimo_config->rf.rx_gain[ant][0] = 20;
p_exmimo_config->rf.tx_gain[ant][0] = 10;
p_exmimo_config->rf.rf_mode[ant] = rf_mode;
p_exmimo_config->rf.rf_local[ant] = build_rflocal(20,25,26,04);
p_exmimo_config->rf.rf_rxdc[ant] = build_rfdc(128, 128);
p_exmimo_config->rf.rf_vcocal[ant] = (0xE<<6) + 0xE;
}
void setup_ue_buffers(PHY_VARS_UE *phy_vars_ue, LTE_DL_FRAME_PARMS *frame_parms, int carrier) {
int i;
if (phy_vars_ue) {
if ((frame_parms->nb_antennas_rx>1) && (carrier>0)) {
printf("RX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
if ((frame_parms->nb_antennas_tx>1) && (carrier>0)) {
printf("TX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
// replace RX signal buffers with mmaped HW versions
for (i=0;i<frame_parms->nb_antennas_rx;i++) {
free(phy_vars_ue->lte_ue_common_vars.rxdata[i]);
phy_vars_ue->lte_ue_common_vars.rxdata[i] = (int32_t*) openair0_exmimo_pci[card].adc_head[i+carrier];
printf("rxdata[%d] @ %p\n",i,phy_vars_ue->lte_ue_common_vars.rxdata[i]);
}
for (i=0;i<frame_parms->nb_antennas_tx;i++) {
free(phy_vars_ue->lte_ue_common_vars.txdata[i]);
phy_vars_ue->lte_ue_common_vars.txdata[i] = (int32_t*) openair0_exmimo_pci[card].dac_head[i+carrier];
printf("txdata[%d] @ %p\n",i,phy_vars_ue->lte_ue_common_vars.txdata[i]);
}
}
}
void setup_eNB_buffers(PHY_VARS_eNB *phy_vars_eNB, LTE_DL_FRAME_PARMS *frame_parms, int carrier) {
int i,j;
if (phy_vars_eNB) {
if ((frame_parms->nb_antennas_rx>1) && (carrier>0)) {
printf("RX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
if ((frame_parms->nb_antennas_tx>1) && (carrier>0)) {
printf("TX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
// replace RX signal buffers with mmaped HW versions
for (i=0;i<frame_parms->nb_antennas_rx;i++) {
free(phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i]);
phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i] = (int32_t*) openair0_exmimo_pci[card].adc_head[i+carrier];
printf("rxdata[%d] @ %p\n",i,phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i]);
for (j=0;j<16;j++) {
printf("rxbuffer %d: %x\n",j,phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i][j]);
phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i][j] = 16-j;
}
}
for (i=0;i<frame_parms->nb_antennas_tx;i++) {
free(phy_vars_eNB->lte_eNB_common_vars.txdata[0][i]);
phy_vars_eNB->lte_eNB_common_vars.txdata[0][i] = (int32_t*) openair0_exmimo_pci[card].dac_head[i+carrier];
printf("txdata[%d] @ %p\n",i,phy_vars_eNB->lte_eNB_common_vars.txdata[0][i]);
for (j=0;j<16;j++) {
printf("txbuffer %d: %x\n",j,phy_vars_eNB->lte_eNB_common_vars.txdata[0][i][j]);
phy_vars_eNB->lte_eNB_common_vars.txdata[0][i][j] = 16-j;
}
}
}
}
targets/RTAI/USER/lte_scope.c deleted 100644 → 0
View file @ 337df938
/* Form definition file generated by fdesign */
#include <stdlib.h>
#include "lte_scope.h"
/***************************************
***************************************/
FD_lte_scope *
create_form_lte_scope( void )
{
FL_OBJECT *obj;
FD_lte_scope *fdui = fl_malloc( sizeof *fdui );
fdui->vdata = fdui->cdata = NULL;
fdui->ldata = 0;
fdui->lte_scope = fl_bgn_form( FL_NO_BOX, 780, 723 );
obj = fl_add_box( FL_ROUNDED_BOX, 0, 0, 780, 723, "" );
fl_set_object_color( obj, FL_BLACK, FL_BLUE );
fdui->channel_t_re[0] = obj = fl_add_xyplot( FL_NORMAL_XYPLOT, 20, 20, 280, 100, "Real(RX0)" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_BLUE );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->channel_t_im[0] = obj = fl_add_xyplot( FL_NORMAL_XYPLOT, 310, 20, 280, 100, "Imag(RX0)" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_BLUE );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->channel_t_re[1] = obj = fl_add_xyplot( FL_NORMAL_XYPLOT, 20, 140, 280, 100, "Real(RX1)" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_RED );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->channel_t_im[1] = obj = fl_add_xyplot( FL_NORMAL_XYPLOT, 310, 140, 280, 100, "Imag(RX1)" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_RED );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->channel_t_re[2] = obj = fl_add_xyplot( FL_NORMAL_XYPLOT, 20, 260, 280, 100, "Real(RX2)" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_GREEN );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->channel_t_im[2] = obj = fl_add_xyplot( FL_NORMAL_XYPLOT, 310, 260, 280, 100, "Imag(RX2)" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_GREEN );
fl_set_object_lcolor( obj, FL_WHITE );
/*
fdui->scatter_plot = obj = fl_add_xyplot( FL_POINTS_XYPLOT, 600, 230, 160, 190, "PBCH Scatter Plot" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_GREEN );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->scatter_plot2 = obj = fl_add_xyplot( FL_POINTS_XYPLOT, 600, 440, 160, 190, "PDSCH/PUSCH Scatter Plot" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_YELLOW );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->scatter_plot1 = obj = fl_add_xyplot( FL_POINTS_XYPLOT, 600, 20, 160, 190, "PDCCH Scatter Plot" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_CYAN );
fl_set_object_lcolor( obj, FL_WHITE );
fdui->ia_receiver_button = obj = fl_add_button( FL_PUSH_BUTTON, 620, 660, 130, 40, "IA receiver OFF" );
fl_set_object_lalign( obj, FL_ALIGN_CENTER );
fl_set_object_color( obj, FL_RED, FL_RED);
fl_set_object_callback( obj, ia_receiver_on_off, 0 );
fdui->tput = obj = fl_add_xyplot( FL_NORMAL_XYPLOT, 20, 560, 570, 140, "Throughput [kbits/s]" );
fl_set_object_boxtype( obj, FL_EMBOSSED_BOX );
fl_set_object_color( obj, FL_BLACK, FL_WHITE );
fl_set_object_lcolor( obj, FL_WHITE );
*/
fl_end_form( );
fdui->lte_scope->fdui = fdui;
return fdui;
}
targets/RTAI/USER/lte_scope.fd deleted 100644 → 0
View file @ 337df938
Magic: 14000
Internal Form Definition File
(do not change)
Number of forms: 1
Unit of measure: FL_COORD_PIXEL
=============== FORM ===============
Name: lte_scope
Width: 780
Height: 723
Number of Objects: 11
--------------------
class: FL_BOX
type: ROUNDED_BOX
box: 0 0 780 723
boxtype: FL_ROUNDED_BOX
colors: FL_BLACK FL_BLUE
alignment: FL_ALIGN_CENTER
style: FL_NORMAL_STYLE
size: FL_DEFAULT_SIZE
lcol: FL_BLACK
label:
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name:
callback:
argument:
--------------------
class: FL_XYPLOT
type: NORMAL_XYPLOT
box: 20 20 280 100
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_BLUE
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: Received Signal (Time-Domain, dB)
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: channel_t_re
callback:
argument:
--------------------
class: FL_XYPLOT
type: POINTS_XYPLOT
box: 600 230 160 190
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_GREEN
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: PBCH Scatter Plot
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: scatter_plot
callback:
argument:
--------------------
class: FL_XYPLOT
type: IMPULSE_XYPLOT
box: 20 140 570 90
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_RED
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: Frequency Domain Channel Estimate
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: channel_f
callback:
argument:
--------------------
class: FL_XYPLOT
type: NORMAL_XYPLOT
box: 310 20 280 100
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_BLUE
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: Time-Domain Channel Estimate
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: channel_t_im
callback:
argument:
--------------------
class: FL_XYPLOT
type: POINTS_XYPLOT
box: 20 250 570 130
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_GREEN
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: PBCH Decoder Input
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: decoder_input
callback:
argument:
--------------------
class: FL_XYPLOT
type: POINTS_XYPLOT
box: 600 440 160 190
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_YELLOW
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: PDSCH/PUSCH Scatter Plot
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: scatter_plot2
callback:
argument:
--------------------
class: FL_XYPLOT
type: POINTS_XYPLOT
box: 600 20 160 190
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_CYAN
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: PDCCH Scatter Plot
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: scatter_plot1
callback:
argument:
--------------------
class: FL_BUTTON
type: PUSH_BUTTON
box: 620 660 130 40
boxtype: FL_UP_BOX
colors: FL_COL1 FL_COL1
alignment: FL_ALIGN_CENTER
style: FL_NORMAL_STYLE
size: FL_DEFAULT_SIZE
lcol: FL_BLACK
label: IA receiver OFF
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: ia_receiver_button
callback: ia_receiver_on_off
argument: 0
--------------------
class: FL_XYPLOT
type: POINTS_XYPLOT
box: 20 400 570 140
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_YELLOW
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: PDSCH/PUSCH Decoder Input
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: demod_out
callback:
argument:
--------------------
class: FL_XYPLOT
type: NORMAL_XYPLOT
box: 20 560 570 140
boxtype: FL_EMBOSSED_BOX
colors: FL_BLACK FL_WHITE
alignment: FL_ALIGN_BOTTOM
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_WHITE
label: Throughput [kbits/s]
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: tput
callback:
argument:
==============================
create_the_forms
targets/RTAI/USER/lte_scope.h deleted 100644 → 0
View file @ 337df938
/* Header file generated by fdesign on Tue Nov 13 09:42:50 2012 */
#ifndef FD_lte_scope_h_
#define FD_lte_scope_h_
#include <forms.h>
/* Callbacks, globals and object handlers */
extern void ia_receiver_on_off( FL_OBJECT *, long );
/* Forms and Objects */
typedef struct {
FL_FORM * lte_scope;
void * vdata;
char * cdata;
long ldata;
FL_OBJECT * channel_t_re[4];
FL_OBJECT * channel_t_im[4];
/*
FL_OBJECT * scatter_plot;
FL_OBJECT * channel_f;
FL_OBJECT * decoder_input;
FL_OBJECT * scatter_plot2;
FL_OBJECT * scatter_plot1;
FL_OBJECT * ia_receiver_button;
FL_OBJECT * demod_out;
FL_OBJECT * tput;
*/
} FD_lte_scope;
extern FD_lte_scope * create_form_lte_scope( void );
#endif /* FD_lte_scope_h_ */
targets/RTAI/USER/make_for_usrp.sh deleted 100755 → 0
View file @ 337df938
#!/bin/bash
############### make nasmesh.ko ###############
sudo rmmod nasmesh
#cd ${OPENAIR2_DIR} && make nasmesh_netlink.ko
#cd ${OPENAIR2_DIR}/NAS/DRIVER/MESH/RB_TOOL/ && make
#make all
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
############## Ethernet config ####################
sudo ifconfig eth0 mtu 4000
sudo sysctl -w net.core.wmem_max=1048576
sudo sysctl -w net.core.rmem_max=50000000
############## rtai modules ###################
if test \! -c /dev/rtai_shm; then
sudo mknod -m 666 /dev/rtai_shm c 10 254
fi
for n in `seq 0 9`; do
f=/dev/rtf$n
if test \! -c $f; then
sudo mknod -m 666 $f c 150 $n
fi
done
sudo modprobe rtai_hal
sudo modprobe rtai_sched
sudo modprobe rtai_fifos
sudo modprobe rtai_sem
sudo modprobe rtai_mbx
sudo modprobe rtai_msg
############## make ###################
make lte-softmodem-usrp NAS=1 USRP=1 XFORMS=1 RTAI=1 HARD_RT=1 #DRIVER2013=1
#make lte-softmodem NAS=1 XFORMS=1 USRP=0 RTAI=1 DRIVER2013=1
echo DONE!
exit 0
targets/RTAI/USER/msg_helper.c deleted 100644 → 0
View file @ 337df938
#include <rtai_sem.h>
#include "msg_many.h"
/*
* Add a task task to ri->worker.
* Return the used index in ri->worker on success
* Return -TM_WORKER_FULL_ERROR if ri->worker full
* Return -TM_WORKER_ERROR else
*/
int tm_add_task(RT_TASK *task, run_info_t *ri)
{
if(ri->used >= NUM_THREADS)
return -TM_WORKER_FULL_ERROR;
rt_sem_wait(ri->update_sem);
(*ri->worker)[ri->used] = task;
ri->used++;
rt_sem_signal(ri->update_sem);
return ri->used - 1;
}
/*
* Remove the a hole in worker at index index by
* shift the next slots by one.
* This function assume that update_sem are locked.
* Return the new used counter.
*/
int _tm_clean_worker(RT_TASK *(*worker)[], int index, int used)
{
int i;
for(i = index; i < used; i++)
(*worker)[i] = (*worker)[i + 1];
return used - 1;
}
/*
* Remove a task from ri->worker a index task_index
* Return 0 on success
* Return -TM_WORKER_ERROR else
*/
int tm_del_task(int task_index, run_info_t *ri)
{
rt_sem_wait(ri->update_sem);
ri->used = _tm_clean_worker(ri->worker, task_index, ri->used);
rt_sem_signal(ri->update_sem);
return 0;
}
/*
* Return next index to use on ri->worker.
* It depends on the old_index and ri->used.
* Return -TM_WORKER_ERROR if ri->used == 0.
*/
inline int tm_get_next_task_index(int old_index, run_info_t *ri)
{
if(ri->used == 0)
return -TM_WORKER_ERROR;
return (old_index + 1) % ri->used;
}
targets/RTAI/USER/msg_many.c deleted 100644 → 0
View file @ 337df938
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <unistd.h>
#include <string.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sched.h>
#include <rtai_lxrt.h>
#include <rtai_sem.h>
#include <rtai_msg.h>
#include "msg_many.h"
static void *msg_test_thread(void *arg)
{
RT_TASK *self;
RT_TASK *sender_task;
thread_info_t *ti = (thread_info_t *)arg;
run_info_t *ri = ti->ri;
unsigned int msg;
int counter = 0;
char name[6];
int task_index;
/* Build custom task name for each thread */
snprintf(name, 6, "%s%03i", THREAD_NAME_PREFIX, ti->thread_num);
self = rt_task_init_schmod(nam2num(name), 0, 0, 0, SCHED_FIFO, 0xF);
mlockall(MCL_CURRENT | MCL_FUTURE);
rt_make_hard_real_time();
task_index = tm_add_task(self, ri);
if(task_index != -TM_WORKER_FULL_ERROR)
{
while (*(ri->exit_condition) == 0)
{
// wait only one PERIOD to avoid wait for ever
sender_task = rt_receive_timed(ri->sender, &msg, ri->period);
//sender_task = rt_receive(0, &msg);
if(sender_task == ri->sender)
counter++;
}
rt_printk("%s: counter == %i\n", name, counter);
tm_del_task(task_index, ri);
} else {
rt_printk("%s: Worker array full!\n", name);
}
rt_make_soft_real_time();
rt_task_delete(self);
free((void *) ti);
return 0;
}
int main(void)
{
RT_TASK *self;
RT_TASK *tmp_worker_task;
RT_TASK *worker_tasks[NUM_THREADS];
int worker_threads[NUM_THREADS];
RTIME now;
unsigned int i, ii;
run_info_t ri;
thread_info_t *ti;
uint8_t exit_condition = 0;
int fail_count = 0;
int old_index = 0;
uint8_t lost;
// make main thread LXRT soft realtime
self = rt_task_init_schmod(nam2num("MAINTK"), 10, 0, 0, SCHED_FIFO, 0xF);
mlockall(MCL_CURRENT | MCL_FUTURE);
rt_make_hard_real_time();
rt_set_periodic_mode();
start_rt_timer(0);
/* Build all information need to run in main and the thread */
ri.sender = self;
ri.exit_condition = &exit_condition;
ri.period = nano2count(PERIOD);
ri.update_sem = rt_sem_init(nam2num("MUTEX"), 1);
if(ri.update_sem == 0)
exit(-1);
ri.used = 0;
ri.worker = &worker_tasks;
now = rt_get_time() + ri.period;
rt_task_make_periodic(self, now, ri.period);
/* start all threads */
for(i = 0; i < NUM_THREADS; i++)
{
ti = (thread_info_t *)malloc(sizeof(thread_info_t));
if(ti == NULL)
{
rt_printk("MAINTK: can't get memory!\n");
exit(-1);
}
ti->ri = &ri;
ti->thread_num = i;
worker_threads[i] = rt_thread_create(msg_test_thread, ti , 10000);
}
rt_sleep(NUM_THREADS * ri.period);
rt_printk("start\n");
for(i = 0; i < THRESHOLD; i++)
{
rt_task_wait_period();
lost = 1;
for(ii = 0; ii < ri.used; ii++)
{
old_index = tm_get_next_task_index(old_index, &ri);
if(old_index == -TM_WORKER_ERROR)
{
rt_printk("MAINTK: No Tasks!\n");
break;
}
tmp_worker_task = rt_send_if(worker_tasks[old_index], i);
if(tmp_worker_task == worker_tasks[old_index])
{
lost = 0;
break;
}
}
if(lost)
fail_count++;
}
rt_printk("fail_count == %i\n", fail_count);
// cleanup
exit_condition = 1;
rt_make_soft_real_time();
rt_task_delete(self);
/* wait for the worker threadss */
for(ii = 0; ii < ri.used; ii++)
{
rt_thread_join(worker_threads[ii]);
}
stop_rt_timer();
return 0;
}
targets/RTAI/USER/msg_many.h deleted 100644 → 0
View file @ 337df938
#ifndef __MSG_MANY_H__
#define __MSG_MANY_H__
#include <stdint.h>
#define PERIOD 500000 /* in nano seconds */
#define THRESHOLD 1000000
#define THREAD_NAME_PREFIX "TK"
#define NUM_THREADS 10
#define TM_WORKER_FULL_ERROR 1
#define TM_WORKER_ERROR 2
typedef struct run_info {
RT_TASK *sender;
uint8_t *exit_condition;
long long period;
SEM *update_sem; /* protect the task array */
int used; /* counter of used slots in worker */
RT_TASK *(*worker)[]; /* declare worker as pointer to array of pointer to RT_TASK */
} run_info_t;
typedef struct thread_info {
run_info_t *ri;
uint8_t thread_num;
} thread_info_t;
int tm_add_task(RT_TASK *task, run_info_t *ri);
int tm_del_task(int task_index, run_info_t *ri);
inline int tm_get_next_task_index(int old_index, run_info_t *ri);
#endif
targets/RTAI/USER/rt_wrapper.c deleted 100644 → 0
View file @ 337df938
/*******************************************************************************
Eurecom OpenAirInterface
Copyright(c) 1999 - 2011 Eurecom
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information
Openair Admin: openair_admin@eurecom.fr
Openair Tech : openair_tech@eurecom.fr
Forums : http://forums.eurecom.fsr/openairinterface
Address : Eurecom, 2229, route des crêtes, 06560 Valbonne Sophia Antipolis, France
*******************************************************************************/
/*! \file rt_wrapper.h
* \brief provides a wrapper for the timing function for real-time opeartions depending on weather RTAI is used or not
* \author F. Kaltenberger
* \date 2013
* \version 0.1
* \company Eurecom
* \email: florian.kaltenberger@eurecom.fr
* \note
* \warning
*/
#include "rt_wrapper.h"
#ifndef RTAI
struct timespec interval, next, now, res;
clockid_t clock_id = CLOCK_REALTIME; //other options are CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID
RTIME rt_get_time_ns (void) {
clock_gettime(clock_id, &now);
return(now.tv_sec*1e9+now.tv_nsec);
}
int rt_sleep_ns (RTIME x) {
int ret;
clock_gettime(clock_id, &now);
interval.tv_sec = x/((RTIME)1000000000);
interval.tv_nsec = x%((RTIME)1000000000);
//rt_printk("sleeping for %d sec and %d ns\n",interval.tv_sec,interval.tv_nsec);
next = now;
next.tv_sec += interval.tv_sec;
next.tv_nsec += interval.tv_nsec;
if (next.tv_nsec>=1000000000) {
next.tv_nsec -= 1000000000;
next.tv_sec++;
}
ret = clock_nanosleep(clock_id, TIMER_ABSTIME, &next, NULL);
/*
if (ret==EFAULT)
rt_printk("rt_sleep_ns returned EFAULT (%d), reqested %d sec and %d ns\n",ret,next.tv_sec,next.tv_nsec);
if (ret==EINVAL)
rt_printk("rt_sleep_ns returned EINVAL (%d), reqested %d sec and %d ns\n",ret,next.tv_sec,next.tv_nsec);
if (ret==EINTR)
rt_printk("rt_sleep_ns returned EINTR (%d), reqested %d sec and %d ns\n",ret,next.tv_sec,next.tv_nsec);
*/
return(ret);
}
void check_clock(void) {
if (clock_getres(clock_id, &res)) {
printf("clock_getres failed");
} else {
printf("reported resolution = %llu ns\n", (long long int) ((int) 1e9 * res.tv_sec) + (long long int) res.tv_nsec);
}
}
#else
int rt_sleep_ns(RTIME x) {
rt_sleep(nano2count(x));
return(0);
}
#endif
targets/RTAI/USER/rt_wrapper.h deleted 100644 → 0
View file @ 337df938
/*******************************************************************************
Eurecom OpenAirInterface
Copyright(c) 1999 - 2011 Eurecom
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information
Openair Admin: openair_admin@eurecom.fr
Openair Tech : openair_tech@eurecom.fr
Forums : http://forums.eurecom.fsr/openairinterface
Address : Eurecom, 2229, route des crêtes, 06560 Valbonne Sophia Antipolis, France
*******************************************************************************/
/*! \file rt_wrapper.h
* \brief provides a wrapper for the timing function for real-time opeartions depending on weather RTAI is used or not
* \author F. Kaltenberger
* \date 2013
* \version 0.1
* \company Eurecom
* \email: florian.kaltenberger@eurecom.fr
* \note
* \warning
*/
#ifndef RTAI
#include <time.h>
#include <errno.h>
#include <stdio.h>
#include <pthread.h>
#define RTIME long long int
#define rt_printk printf
RTIME rt_get_time_ns (void);
int rt_sleep_ns (RTIME x);
void check_clock(void);
#else
#include <rtai_lxrt.h>
#include <rtai_sem.h>
#include <rtai_msg.h>
int rt_sleep_ns(RTIME x);
#endif
targets/RTAI/USER/sched_dlsch.c deleted 100644 → 0
View file @ 337df938
/*******************************************************************************
Eurecom OpenAirInterface
Copyright(c) 1999 - 2011 Eurecom
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information
Openair Admin: openair_admin@eurecom.fr
Openair Tech : openair_tech@eurecom.fr
Forums : http://forums.eurecom.fsr/openairinterface
Address : Eurecom, 2229, route des crêtes, 06560 Valbonne Sophia Antipolis, France
*******************************************************************************/
/*! \file sched_dlsch.c
* \brief DLSCH decoding thread (RTAI)
* \author R. Knopp, F. Kaltenberger
* \date 2011
* \version 0.1
* \company Eurecom
* \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr
* \note
* \warning
*/
#include <stdio.h>
#include <stdlib.h>
#include <sched.h>
#include "rt_wrapper.h"
#include <sys/mman.h>
#include "PHY/types.h"
#include "PHY/defs.h"
#include "PHY/extern.h"
#include "SCHED/defs.h"
#include "MAC_INTERFACE/extern.h"
#ifdef CBMIMO1
#include "ARCH/CBMIMO1/DEVICE_DRIVER/cbmimo1_device.h"
#include "ARCH/CBMIMO1/DEVICE_DRIVER/extern.h"
#include "ARCH/CBMIMO1/DEVICE_DRIVER/defs.h"
#endif // CBMIMO1
#include "UTIL/LOG/vcd_signal_dumper.h"
#define DEBUG_PHY
/// Mutex for instance count on dlsch scheduling
pthread_mutex_t dlsch_mutex[8];
/// Condition variable for dlsch thread
pthread_cond_t dlsch_cond[8];
pthread_t dlsch_threads[8];
pthread_attr_t attr_dlsch_threads;
unsigned char dlsch_thread_indices[8];
// activity indicators for harq_pid's
int dlsch_instance_cnt[8];
// process ids for cpu
int dlsch_cpuid[8];
// subframe number for each harq_pid (needed to store ack in right place for UL)
int dlsch_subframe[8];
extern int oai_exit;
/*
extern int dlsch_errors;
extern int dlsch_received;
extern int dlsch_errors_last;
extern int dlsch_received_last;
extern int dlsch_fer;
extern int current_dlsch_cqi;
*/
/** DLSCH Decoding Thread */
static void * dlsch_thread(void *param) {
//unsigned long cpuid;
unsigned char dlsch_thread_index = *((unsigned char *)param);
unsigned int ret;
uint8_t harq_pid;
RTIME time_in,time_out;
#ifdef RTAI
RT_TASK *task;
char task_name[8];
#endif
int eNB_id = 0, UE_id = 0;
PHY_VARS_UE *phy_vars_ue = PHY_vars_UE_g[UE_id];
if ((dlsch_thread_index <0) || (dlsch_thread_index>7)) {
LOG_E(PHY,"[SCHED][DLSCH] Illegal dlsch_thread_index %d (%p)!!!!\n",dlsch_thread_index,param);
return 0;
}
#ifdef RTAI
sprintf(task_name,"DLSCH%d",dlsch_thread_index);
task = rt_task_init_schmod(nam2num(task_name), 0, 0, 0, SCHED_FIFO, 0xF);
if (task==NULL) {
LOG_E(PHY,"[SCHED][DLSCH] Problem starting dlsch_thread_index %d (%s)!!!!\n",dlsch_thread_index,task_name);
return 0;
}
else {
LOG_I(PHY,"[SCHED][DLSCH] dlsch_thread for process %d started with id %p\n",
dlsch_thread_index,
task);
}
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
//rt_set_runnable_on_cpuid(task,1);
//cpuid = rtai_cpuid();
#ifdef HARD_RT
rt_make_hard_real_time();
#endif
//dlsch_cpuid[dlsch_thread_index] = cpuid;
while (!oai_exit){
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_DLSCH_THREAD0+dlsch_thread_index,0);
if (pthread_mutex_lock(&dlsch_mutex[dlsch_thread_index]) != 0) {
LOG_E(PHY,"[SCHED][DLSCH] error locking mutex.\n");
}
else {
while (dlsch_instance_cnt[dlsch_thread_index] < 0) {
pthread_cond_wait(&dlsch_cond[dlsch_thread_index],&dlsch_mutex[dlsch_thread_index]);
}
if (pthread_mutex_unlock(&dlsch_mutex[dlsch_thread_index]) != 0) {
LOG_E(PHY,"[SCHED][DLSCH] error unlocking mutex.\n");
}
}
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_DLSCH_THREAD0+dlsch_thread_index,1);
if (oai_exit) break;
LOG_I(PHY,"[SCHED][DLSCH] Frame %d: Calling dlsch_decoding with dlsch_thread_index = %d\n",phy_vars_ue->frame,dlsch_thread_index);
time_in = rt_get_time_ns();
if (phy_vars_ue->frame < phy_vars_ue->dlsch_errors[eNB_id]) {
phy_vars_ue->dlsch_errors[eNB_id]=0;
phy_vars_ue->dlsch_received[eNB_id] = 0;
}
harq_pid = dlsch_thread_index;
if (phy_vars_ue->dlsch_ue[eNB_id][0]) {
// rt_printk("[SCHED][DLSCH] Frame %d, slot %d, start %llu, end %llu, proc time: %llu ns\n",phy_vars_ue->frame,last_slot,time0,time1,(time1-time0));
dlsch_unscrambling(&phy_vars_ue->lte_frame_parms,
0,
phy_vars_ue->dlsch_ue[eNB_id][0],
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->G,
phy_vars_ue->lte_ue_pdsch_vars[eNB_id]->llr[0],
0,
dlsch_subframe[dlsch_thread_index]<<1);
LOG_I(PHY,"[UE %d] PDSCH Calling dlsch_decoding for subframe %d, harq_pid %d, G%d\n", phy_vars_ue->Mod_id,dlsch_subframe[dlsch_thread_index], harq_pid,phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->G);
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_DLSCH_DECODING0+dlsch_thread_index,1);
ret = dlsch_decoding(phy_vars_ue,
phy_vars_ue->lte_ue_pdsch_vars[eNB_id]->llr[0],
&phy_vars_ue->lte_frame_parms,
phy_vars_ue->dlsch_ue[eNB_id][0],
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid],
dlsch_subframe[dlsch_thread_index],
harq_pid,
1, // is_crnti
0); // llr8_flag
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_DLSCH_DECODING0+dlsch_thread_index,0);
LOG_D(PHY,"[UE %d][PDSCH %x/%d] Frame %d subframe %d: PDSCH/DLSCH decoding iter %d (mcs %d, rv %d, TBS %d)\n",
phy_vars_ue->Mod_id,
phy_vars_ue->dlsch_ue[eNB_id][0]->rnti,harq_pid,
phy_vars_ue->frame,dlsch_subframe[dlsch_thread_index],ret,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->mcs,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->rvidx,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->TBS);
if (ret == (1+MAX_TURBO_ITERATIONS)) {
phy_vars_ue->dlsch_errors[eNB_id]++;
#ifdef DEBUG_PHY
LOG_I(PHY,"[UE %d][PDSCH %x/%d] Frame %d subframe %d DLSCH in error (rv %d,mcs %d)\n",
phy_vars_ue->Mod_id,phy_vars_ue->dlsch_ue[eNB_id][0]->rnti,
harq_pid,phy_vars_ue->frame,dlsch_subframe[dlsch_thread_index],
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->rvidx,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->mcs);
#endif
}
else {
LOG_I(PHY,"[UE %d][PDSCH %x/%d] Frame %d subframe %d: Received DLSCH (rv %d,mcs %d)\n",
phy_vars_ue->Mod_id,phy_vars_ue->dlsch_ue[eNB_id][0]->rnti,
harq_pid,phy_vars_ue->frame,dlsch_subframe[dlsch_thread_index],
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->rvidx,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->mcs);
#ifdef OPENAIR2
mac_xface->ue_send_sdu(phy_vars_ue->Mod_id,
phy_vars_ue->frame,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->b,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->TBS>>3,
eNB_id);
#endif
phy_vars_ue->total_TBS[eNB_id] = phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->TBS + phy_vars_ue->total_TBS[eNB_id];
phy_vars_ue->total_received_bits[eNB_id] = phy_vars_ue->total_received_bits[eNB_id] + phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->TBS;
}
}
// this is done in main thread
/*
if (phy_vars_ue->frame % 100 == 0) {
if ((phy_vars_ue->dlsch_received[eNB_id] - phy_vars_ue->dlsch_received_last[eNB_id]) != 0)
phy_vars_ue->dlsch_fer[eNB_id] = (100*(phy_vars_ue->dlsch_errors[eNB_id] - phy_vars_ue->dlsch_errors_last[eNB_id]))/(phy_vars_ue->dlsch_received[eNB_id] - phy_vars_ue->dlsch_received_last[eNB_id]);
phy_vars_ue->dlsch_errors_last[eNB_id] = phy_vars_ue->dlsch_errors[eNB_id];
phy_vars_ue->dlsch_received_last[eNB_id] = phy_vars_ue->dlsch_received[eNB_id];
}
*/
time_out = rt_get_time_ns();
#ifdef DEBUG_PHY
LOG_I(PHY,"[UE %d][PDSCH %x/%d] Frame %d subframe %d: PDSCH/DLSCH decoding iter %d (mcs %d, rv %d, TBS %d)\n",
phy_vars_ue->Mod_id,
phy_vars_ue->dlsch_ue[eNB_id][0]->rnti,harq_pid,
phy_vars_ue->frame,dlsch_subframe[dlsch_thread_index],ret,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->mcs,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->rvidx,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->TBS);
if (phy_vars_ue->frame%100==0) {
LOG_D(PHY,"[UE %d][PDSCH %x] Frame %d subframe %d dlsch_errors %d, dlsch_received %d, dlsch_fer %d, current_dlsch_cqi %d\n",
phy_vars_ue->Mod_id,phy_vars_ue->dlsch_ue[eNB_id][0]->rnti,
phy_vars_ue->frame,dlsch_subframe[dlsch_thread_index],
phy_vars_ue->dlsch_errors[eNB_id],
phy_vars_ue->dlsch_received[eNB_id],
phy_vars_ue->dlsch_fer[eNB_id],
phy_vars_ue->PHY_measurements.wideband_cqi_tot[eNB_id]);
}
#endif
if (pthread_mutex_lock(&dlsch_mutex[dlsch_thread_index]) != 0) {
msg("[openair][SCHED][DLSCH] error locking mutex.\n");
}
else {
dlsch_instance_cnt[dlsch_thread_index]--;
if (pthread_mutex_unlock(&dlsch_mutex[dlsch_thread_index]) != 0) {
msg("[openair][SCHED][DLSCH] error unlocking mutex.\n");
}
}
}
#ifdef HARD_RT
rt_make_soft_real_time();
#endif
msg("[openair][SCHED][DLSCH] DLSCH thread %d exiting\n",dlsch_thread_index);
return 0;
}
int init_dlsch_threads(void) {
int error_code;
struct sched_param p;
unsigned char dlsch_thread_index;
pthread_attr_init (&attr_dlsch_threads);
pthread_attr_setstacksize(&attr_dlsch_threads,OPENAIR_THREAD_STACK_SIZE);
//attr_dlsch_threads.priority = 1;
p.sched_priority = OPENAIR_THREAD_PRIORITY;
pthread_attr_setschedparam (&attr_dlsch_threads, &p);
#ifndef RTAI_ISNT_POSIX
pthread_attr_setschedpolicy (&attr_dlsch_threads, SCHED_FIFO);
#endif
for(dlsch_thread_index=0;dlsch_thread_index<8;dlsch_thread_index++) {
pthread_mutex_init(&dlsch_mutex[dlsch_thread_index],NULL);
pthread_cond_init(&dlsch_cond[dlsch_thread_index],NULL);
dlsch_instance_cnt[dlsch_thread_index] = -1;
dlsch_thread_indices[dlsch_thread_index] = dlsch_thread_index;
rt_printk("[openair][SCHED][DLSCH][INIT] Allocating DLSCH thread for dlsch_thread_index %d (%p)\n",dlsch_thread_index,&dlsch_thread_indices[dlsch_thread_index]);
error_code = pthread_create(&dlsch_threads[dlsch_thread_index],
&attr_dlsch_threads,
dlsch_thread,
(void *)&dlsch_thread_indices[dlsch_thread_index]);
if (error_code!= 0) {
rt_printk("[openair][SCHED][DLSCH][INIT] Could not allocate dlsch_thread %d, error %d\n",dlsch_thread_index,error_code);
return(error_code);
}
else {
rt_printk("[openair][SCHED][DLSCH][INIT] Allocate dlsch_thread %d successful\n",dlsch_thread_index);
}
}
return(0);
}
void cleanup_dlsch_threads(void) {
unsigned char dlsch_thread_index;
for(dlsch_thread_index=0;dlsch_thread_index<8;dlsch_thread_index++) {
// pthread_exit(&dlsch_threads[dlsch_thread_index]);
rt_printk("[openair][SCHED][DLSCH] Scheduling dlsch_thread %d to exit\n",dlsch_thread_index);
dlsch_instance_cnt[dlsch_thread_index] = 0;
if (pthread_cond_signal(&dlsch_cond[dlsch_thread_index]) != 0)
rt_printk("[openair][SCHED][DLSCH] ERROR pthread_cond_signal\n");
else
rt_printk("[openair][SCHED][DLSCH] Signalled dlsch_thread %d to exit\n",dlsch_thread_index);
rt_printk("[openair][SCHED][DLSCH] Exiting ...\n");
pthread_cond_destroy(&dlsch_cond[dlsch_thread_index]);
pthread_mutex_destroy(&dlsch_mutex[dlsch_thread_index]);
}
}
targets/RTAI/USER/sched_rx_pdsch.c deleted 100644 → 0
View file @ 337df938
/*******************************************************************************
Eurecom OpenAirInterface
Copyright(c) 1999 - 2011 Eurecom
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information
Openair Admin: openair_admin@eurecom.fr
Openair Tech : openair_tech@eurecom.fr
Forums : http://forums.eurecom.fsr/openairinterface
Address : Eurecom, 2229, route des crêtes, 06560 Valbonne Sophia Antipolis, France
*******************************************************************************/
/*! \file sched_dlsch.c
* \brief DLSCH decoding thread (RTAI)
* \author R. Knopp, F. Kaltenberger
* \date 2011
* \version 0.1
* \company Eurecom
* \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr
* \note
* \warning
*/
#include <stdio.h>
#include <stdlib.h>
#include <sched.h>
#include "rt_wrapper.h"
#include <sys/mman.h>
#include "PHY/types.h"
#include "PHY/defs.h"
#include "PHY/extern.h"
#include "SCHED/defs.h"
#include "SCHED/extern.h"
#include "MAC_INTERFACE/extern.h"
#ifdef CBMIMO1
#include "ARCH/CBMIMO1/DEVICE_DRIVER/cbmimo1_device.h"
#include "ARCH/CBMIMO1/DEVICE_DRIVER/extern.h"
#include "ARCH/CBMIMO1/DEVICE_DRIVER/defs.h"
#endif // CBMIMO1
#include "UTIL/LOG/vcd_signal_dumper.h"
RTIME time0,time1;
#define DEBUG_PHY
/// Mutex for instance count on rx_pdsch scheduling
pthread_mutex_t rx_pdsch_mutex;
/// Condition variable for rx_pdsch thread
pthread_cond_t rx_pdsch_cond;
pthread_t rx_pdsch_thread_var;
pthread_attr_t attr_rx_pdsch_thread;
// activity indicators for harq_pid's
int rx_pdsch_instance_cnt;
// process ids for cpu
int rx_pdsch_cpuid;
// subframe number for each harq_pid (needed to store ack in right place for UL)
int rx_pdsch_slot;
extern int oai_exit;
extern pthread_mutex_t dlsch_mutex[8];
extern int dlsch_instance_cnt[8];
extern int dlsch_subframe[8];
extern pthread_cond_t dlsch_cond[8];
/** RX_PDSCH Decoding Thread */
static void * rx_pdsch_thread(void *param) {
//unsigned long cpuid;
uint8_t rx_pdsch_thread_index = 0;
uint8_t dlsch_thread_index = 0;
uint8_t pilot1,pilot2,pilot3,harq_pid,subframe;
uint8_t last_slot;
uint8_t dual_stream_UE = 0;
uint8_t i_mod = 0;
RTIME time_in,time_out;
#ifdef RTAI
RT_TASK *task;
#endif
int m,eNB_id = 0;
int eNB_id_i = 1;
PHY_VARS_UE *phy_vars_ue = PHY_vars_UE_g[0];
#ifdef RTAI
task = rt_task_init_schmod(nam2num("RX_PDSCH_THREAD"), 0, 0, 0, SCHED_FIFO, 0xF);
if (task==NULL) {
LOG_E(PHY,"[SCHED][RX_PDSCH] Problem starting rx_pdsch thread!!!!\n");
return 0;
}
else {
LOG_I(PHY,"[SCHED][RX_PDSCH] rx_pdsch_thread started for with id %p\n",task);
}
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
//rt_set_runnable_on_cpuid(task,1);
//cpuid = rtai_cpuid();
#ifdef HARD_RT
rt_make_hard_real_time();
#endif
if (phy_vars_ue->lte_frame_parms.Ncp == 0) { // normal prefix
pilot1 = 4;
pilot2 = 7;
pilot3 = 11;
}
else { // extended prefix
pilot1 = 3;
pilot2 = 6;
pilot3 = 9;
}
while (!oai_exit){
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_PDSCH_THREAD, 0);
if (pthread_mutex_lock(&rx_pdsch_mutex) != 0) {
LOG_E(PHY,"[SCHED][RX_PDSCH] error locking mutex.\n");
}
else {
while (rx_pdsch_instance_cnt < 0) {
pthread_cond_wait(&rx_pdsch_cond,&rx_pdsch_mutex);
}
if (pthread_mutex_unlock(&rx_pdsch_mutex) != 0) {
LOG_E(PHY,"[SCHED][RX_PDSCH] error unlocking mutex.\n");
}
}
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_PDSCH_THREAD, 1);
last_slot = rx_pdsch_slot;
subframe = last_slot>>1;
// Important! assumption that PDCCH procedure of next SF is not called yet
harq_pid = phy_vars_ue->dlsch_ue[eNB_id][0]->current_harq_pid;
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->G = get_G(&phy_vars_ue->lte_frame_parms,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->nb_rb,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->rb_alloc,
get_Qm(phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->mcs),
phy_vars_ue->lte_ue_pdcch_vars[eNB_id]->num_pdcch_symbols,
phy_vars_ue->frame,subframe);
if ((phy_vars_ue->transmission_mode[eNB_id] == 5) &&
(phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->dl_power_off==0) &&
(openair_daq_vars.use_ia_receiver > 0)) {
dual_stream_UE = 1;
eNB_id_i = phy_vars_ue->n_connected_eNB;
if (openair_daq_vars.use_ia_receiver == 2) {
i_mod = get_Qm(((phy_vars_ue->frame%1024)/3)%28);
} else {
i_mod = get_Qm(phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->mcs);
}
}
else {
dual_stream_UE = 0;
eNB_id_i = eNB_id+1;
i_mod = 0;
}
if (oai_exit) break;
LOG_D(PHY,"[SCHED][RX_PDSCH] Frame %d, slot %d: Calling rx_pdsch_decoding with harq_pid %d\n",phy_vars_ue->frame,last_slot,harq_pid);
time_in = rt_get_time_ns();
// Check if we are in even or odd slot
if (last_slot%2) { // odd slots
// measure time
//time0 = rt_get_time_ns();
// rt_printk("[SCHED][RX_PDSCH][before rx_pdsch] Frame %d, slot %d, time %llu\n",phy_vars_ue->frame,last_slot,rt_get_time_ns());
for (m=pilot2;m<phy_vars_ue->lte_frame_parms.symbols_per_tti;m++) {
rx_pdsch(phy_vars_ue,
PDSCH,
eNB_id,
eNB_id_i,
subframe,
m,
0,
dual_stream_UE,
i_mod,
harq_pid);
}
// time1 = rt_get_time_ns();
// rt_printk("[SCHED][RX_PDSCH] Frame %d, slot %d, start %llu, end %llu, proc time: %llu ns\n",phy_vars_ue->frame,last_slot,time0,time1,(time1-time0));
dlsch_thread_index = harq_pid;
if (pthread_mutex_lock (&dlsch_mutex[dlsch_thread_index]) != 0) { // Signal MAC_PHY Scheduler
LOG_E(PHY,"[UE %d] ERROR pthread_mutex_lock\n",phy_vars_ue->Mod_id); // lock before accessing shared resource
// vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_UE_RX, VCD_FUNCTION_OUT);
//return(-1);
}
dlsch_instance_cnt[dlsch_thread_index]++;
dlsch_subframe[dlsch_thread_index] = subframe;
pthread_mutex_unlock (&dlsch_mutex[dlsch_thread_index]);
if (dlsch_instance_cnt[dlsch_thread_index] == 0) {
if (pthread_cond_signal(&dlsch_cond[dlsch_thread_index]) != 0) {
LOG_E(PHY,"[UE %d] ERROR pthread_cond_signal for dlsch_cond[%d]\n",phy_vars_ue->Mod_id,dlsch_thread_index);
// vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_UE_RX, VCD_FUNCTION_OUT);
//return(-1);
}
}
else {
LOG_W(PHY,"[UE %d] DLSCH thread for dlsch_thread_index %d busy!!!\n",phy_vars_ue->Mod_id,dlsch_thread_index);
// vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_UE_RX, VCD_FUNCTION_OUT);
//return(-1);
}
} else { // even slots
for (m=phy_vars_ue->lte_ue_pdcch_vars[eNB_id]->num_pdcch_symbols;m<pilot2;m++) {
rx_pdsch(phy_vars_ue,
PDSCH,
eNB_id,
eNB_id_i,
subframe,
m,
(m==phy_vars_ue->lte_ue_pdcch_vars[eNB_id]->num_pdcch_symbols)?1:0, // first_symbol_flag
dual_stream_UE,
i_mod,
harq_pid);
}
}
time_out = rt_get_time_ns();
if (pthread_mutex_lock(&rx_pdsch_mutex) != 0) {
msg("[openair][SCHED][RX_PDSCH] error locking mutex.\n");
}
else {
rx_pdsch_instance_cnt--;
if (pthread_mutex_unlock(&rx_pdsch_mutex) != 0) {
msg("[openair][SCHED][RX_PDSCH] error unlocking mutex.\n");
}
}
}
#ifdef HARD_RT
rt_make_soft_real_time();
#endif
LOG_D(PHY,"[openair][SCHED][RX_PDSCH] RX_PDSCH thread exiting\n");
return 0;
}
int init_rx_pdsch_thread(void) {
int error_code;
struct sched_param p;
pthread_mutex_init(&rx_pdsch_mutex,NULL);
pthread_cond_init(&rx_pdsch_cond,NULL);
pthread_attr_init (&attr_rx_pdsch_thread);
pthread_attr_setstacksize(&attr_rx_pdsch_thread,OPENAIR_THREAD_STACK_SIZE);
//attr_rx_pdsch_thread.priority = 1;
p.sched_priority = OPENAIR_THREAD_PRIORITY;
pthread_attr_setschedparam (&attr_rx_pdsch_thread, &p);
#ifndef RTAI_ISNT_POSIX
pthread_attr_setschedpolicy (&attr_rx_pdsch_thread, SCHED_FIFO);
#endif
rx_pdsch_instance_cnt = -1;
rt_printk("[openair][SCHED][RX_PDSCH][INIT] Allocating RX_PDSCH thread\n");
error_code = pthread_create(&rx_pdsch_thread_var,
&attr_rx_pdsch_thread,
rx_pdsch_thread,
0);
if (error_code!= 0) {
rt_printk("[openair][SCHED][RX_PDSCH][INIT] Could not allocate rx_pdsch_thread, error %d\n",error_code);
return(error_code);
}
else {
rt_printk("[openair][SCHED][RX_PDSCH][INIT] Allocate rx_pdsch_thread successful\n");
return(0);
}
}
void cleanup_rx_pdsch_thread(void) {
rt_printk("[openair][SCHED][RX_PDSCH] Scheduling rx_pdsch_thread to exit\n");
rx_pdsch_instance_cnt = 0;
if (pthread_cond_signal(&rx_pdsch_cond) != 0)
rt_printk("[openair][SCHED][RX_PDSCH] ERROR pthread_cond_signal\n");
else
rt_printk("[openair][SCHED][RX_PDSCH] Signalled rx_pdsch_thread to exit\n");
rt_printk("[openair][SCHED][RX_PDSCH] Exiting ...\n");
pthread_cond_destroy(&rx_pdsch_cond);
pthread_mutex_destroy(&rx_pdsch_mutex);
}
targets/RTAI/USER/sched_ulsch.c deleted 100644 → 0
View file @ 337df938
/*******************************************************************************
Eurecom OpenAirInterface
Copyright(c) 1999 - 2011 Eurecom
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information
Openair Admin: openair_admin@eurecom.fr
Openair Tech : openair_tech@eurecom.fr
Forums : http://forums.eurecom.fsr/openairinterface
Address : Eurecom, 2229, route des crêtes, 06560 Valbonne Sophia Antipolis, France
*******************************************************************************/
/*! \file sched_ulsch.c
* \brief ULSCH decoding thread (RTAI)
* \author R. Knopp, F. Kaltenberger
* \date 2011
* \version 0.1
* \company Eurecom
* \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr
* \note
* \warning
*/
#include <stdio.h>
#include <stdlib.h>
#include <sched.h>
#include "rt_wrapper.h"
#include <sys/mman.h>
#include "PHY/types.h"
#include "PHY/defs.h"
#include "PHY/extern.h"
#include "SCHED/defs.h"
#include "MAC_INTERFACE/extern.h"
#ifdef CBMIMO1
#include "ARCH/CBMIMO1/DEVICE_DRIVER/cbmimo1_device.h"
#include "ARCH/CBMIMO1/DEVICE_DRIVER/extern.h"
#include "ARCH/CBMIMO1/DEVICE_DRIVER/defs.h"
#endif // CBMIMO1
#define DEBUG_PHY
/// Mutex for instance count on ulsch scheduling
pthread_mutex_t ulsch_mutex[NUMBER_OF_UE_MAX];
/// Condition variable for ulsch thread
pthread_cond_t ulsch_cond[NUMBER_OF_UE_MAX];
pthread_t ulsch_threads[NUMBER_OF_UE_MAX];
pthread_attr_t attr_ulsch_threads;
// activity indicators for harq_pid's
int ulsch_instance_cnt[NUMBER_OF_UE_MAX];
// process ids for cpu
int ulsch_cpuid[NUMBER_OF_UE_MAX];
// subframe number for each harq_pid (needed to store ack in right place for UL)
int ulsch_subframe[NUMBER_OF_UE_MAX];
extern int oai_exit;
/*
extern int ulsch_errors;
extern int ulsch_received;
extern int ulsch_errors_last;
extern int ulsch_received_last;
extern int ulsch_fer;
extern int current_ulsch_cqi;
*/
/** ULSCH Decoding Thread */
static void * ulsch_thread(void *param) {
//unsigned long cpuid;
unsigned int ulsch_thread_index = (unsigned int)param;
RTIME time_in,time_out;
#ifdef RTAI
RT_TASK *task;
char ulsch_thread_name[64];
#endif
int eNB_id = 0, UE_id = 0;
PHY_VARS_eNB *phy_vars_eNB = PHY_vars_eNB_g[eNB_id];
if ((ulsch_thread_index <0) || (ulsch_thread_index>NUMBER_OF_UE_MAX)) {
LOG_E(PHY,"[SCHED][ULSCH] Illegal ulsch_thread_index %d!!!!\n",ulsch_thread_index);
return 0;
}
#ifdef RTAI
sprintf(ulsch_thread_name,"ULSCH_THREAD%d",ulsch_thread_index);
LOG_I(PHY,"[SCHED][ULSCH] starting ulsch_thread %s for process %d\n",
ulsch_thread_name,
ulsch_thread_index);
task = rt_task_init_schmod(nam2num(ulsch_thread_name), 0, 0, 0, SCHED_FIFO, 0xF);
if (task==NULL) {
LOG_E(PHY,"[SCHED][ULSCH] Problem starting ulsch_thread_index %d!!!!\n",ulsch_thread_index);
return 0;
}
else {
LOG_I(PHY,"[SCHED][ULSCH] ulsch_thread for process %d started with id %p\n",
ulsch_thread_index,
task);
}
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
//rt_set_runnable_on_cpuid(task,1);
//cpuid = rtai_cpuid();
#ifdef HARD_RT
rt_make_hard_real_time();
#endif
//ulsch_cpuid[ulsch_thread_index] = cpuid;
while (!oai_exit){
if (pthread_mutex_lock(&ulsch_mutex[ulsch_thread_index]) != 0) {
LOG_E(PHY,"[SCHED][ULSCH] error locking mutex.\n");
}
else {
while (ulsch_instance_cnt[ulsch_thread_index] < 0) {
pthread_cond_wait(&ulsch_cond[ulsch_thread_index],&ulsch_mutex[ulsch_thread_index]);
}
if (pthread_mutex_unlock(&ulsch_mutex[ulsch_thread_index]) != 0) {
LOG_E(PHY,"[SCHED][ULSCH] error unlocking mutex.\n");
}
}
if (oai_exit) break;
LOG_D(PHY,"[SCHED][ULSCH] Frame %d: Calling ulsch_decoding with ulsch_thread_index = %d\n",phy_vars_eNB->frame,ulsch_thread_index);
time_in = rt_get_time_ns();
ulsch_decoding_procedures(ulsch_subframe[ulsch_thread_index]<<1,ulsch_thread_index,phy_vars_eNB,0);
time_out = rt_get_time_ns();
if (pthread_mutex_lock(&ulsch_mutex[ulsch_thread_index]) != 0) {
msg("[openair][SCHED][ULSCH] error locking mutex.\n");
}
else {
ulsch_instance_cnt[ulsch_thread_index]--;
if (pthread_mutex_unlock(&ulsch_mutex[ulsch_thread_index]) != 0) {
msg("[openair][SCHED][ULSCH] error unlocking mutex.\n");
}
}
}
#ifdef HARD_RT
rt_make_soft_real_time();
#endif
msg("[openair][SCHED][ULSCH] ULSCH thread %d exiting\n",ulsch_thread_index);
return 0;
}
int init_ulsch_threads(void) {
int error_code, return_code=0;
struct sched_param p;
int ulsch_thread_index;
// later loop on all harq_pids, do 0 for now
for (ulsch_thread_index=0;ulsch_thread_index<NUMBER_OF_UE_MAX;ulsch_thread_index++) {
pthread_mutex_init(&ulsch_mutex[ulsch_thread_index],NULL);
pthread_cond_init(&ulsch_cond[ulsch_thread_index],NULL);
pthread_attr_init (&attr_ulsch_threads);
pthread_attr_setstacksize(&attr_ulsch_threads,OPENAIR_THREAD_STACK_SIZE);
//attr_ulsch_threads.priority = 1;
p.sched_priority = OPENAIR_THREAD_PRIORITY;
pthread_attr_setschedparam (&attr_ulsch_threads, &p);
#ifndef RTAI_ISNT_POSIX
pthread_attr_setschedpolicy (&attr_ulsch_threads, SCHED_FIFO);
#endif
ulsch_instance_cnt[ulsch_thread_index] = -1;
rt_printk("[openair][SCHED][ULSCH][INIT] Allocating ULSCH thread for ulsch_thread_index %d\n",ulsch_thread_index);
error_code = pthread_create(&ulsch_threads[ulsch_thread_index],
&attr_ulsch_threads,
ulsch_thread,
(void *)ulsch_thread_index);
if (error_code!= 0) {
rt_printk("[openair][SCHED][ULSCH][INIT] Could not allocate ulsch_thread %d, error %d\n",ulsch_thread_index,error_code);
return_code+=error_code;
//return(error_code);
}
else {
rt_printk("[openair][SCHED][ULSCH][INIT] Allocate ulsch_thread %d successful\n",ulsch_thread_index);
//return(0);
}
}
return(return_code);
}
void cleanup_ulsch_threads(void) {
int ulsch_thread_index;
for (ulsch_thread_index=0;ulsch_thread_index<NUMBER_OF_UE_MAX;ulsch_thread_index++) {
// pthread_exit(&ulsch_threads[ulsch_thread_index]);
rt_printk("[openair][SCHED][ULSCH] Scheduling ulsch_thread %d to exit\n",ulsch_thread_index);
ulsch_instance_cnt[ulsch_thread_index] = 0;
if (pthread_cond_signal(&ulsch_cond[ulsch_thread_index]) != 0)
rt_printk("[openair][SCHED][ULSCH] ERROR pthread_cond_signal\n");
else
rt_printk("[openair][SCHED][ULSCH] Signalled ulsch_thread %d to exit\n",ulsch_thread_index);
rt_printk("[openair][SCHED][ULSCH] Exiting ...\n");
pthread_cond_destroy(&ulsch_cond[ulsch_thread_index]);
pthread_mutex_destroy(&ulsch_mutex[ulsch_thread_index]);
}
}
targets/RTAI/USER/sleeptest.c deleted 100644 → 0
View file @ 337df938
/*******************************************************************************
Eurecom OpenAirInterface
Copyright(c) 1999 - 2011 Eurecom
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information
Openair Admin: openair_admin@eurecom.fr
Openair Tech : openair_tech@eurecom.fr
Forums : http://forums.eurecom.fsr/openairinterface
Address : Eurecom, 2229, route des crêtes, 06560 Valbonne Sophia Antipolis, France
*******************************************************************************/
/*! \file lte-softmodem.c
* \brief main program to control HW and scheduling
* \author R. Knopp, F. Kaltenberger
* \date 2012
* \version 0.1
* \company Eurecom
* \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr
* \note
* \warning
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sched.h>
#include <signal.h>
#include <execinfo.h>
#include <getopt.h>
#include <pthread.h>
#include "rt_wrapper.h"
#define TIMER_ONESHOT_MODE
#define FRAME_PERIOD 10000000ULL
#define DAQ_PERIOD 500000ULL
#define LTE_SLOTS_PER_FRAME 20
#ifdef RTAI
static SEM *mutex;
//static CND *cond;
static long int thread0;
static long int thread1;
//static long int sync_thread;
#else
#define OPENAIR_THREAD_STACK_SIZE 8192
#define OPENAIR_THREAD_PRIORITY 255
pthread_t thread0;
//pthread_t thread1;
pthread_attr_t attr_dlsch_threads;
struct sched_param sched_param_dlsch;
#endif
int oai_exit = 0;
struct timing_info_t {
//unsigned int frame, hw_slot, last_slot, next_slot;
RTIME time_min, time_max, time_avg, time_last, time_now;
//unsigned int mbox0, mbox1, mbox2, mbox_target;
unsigned int n_samples;
} timing_info;
void signal_handler(int sig)
{
void *array[10];
size_t size;
if (sig==SIGSEGV) {
// get void*'s for all entries on the stack
size = backtrace(array, 10);
// print out all the frames to stderr
fprintf(stderr, "Error: signal %d:\n", sig);
backtrace_symbols_fd(array, size, 2);
exit(-1);
}
else {
oai_exit=1;
}
}
void exit_fun(const char* s)
{
void *array[10];
size_t size;
printf("Exiting: %s\n",s);
oai_exit=1;
//rt_sleep_ns(FRAME_PERIOD);
//exit (-1);
}
int frame=0,slot=0;
/* This is the main eNB thread. It gets woken up by the kernel driver using the RTAI message mechanism (rt_send and rt_receive). */
static void *eNB_thread(void *arg)
{
#ifdef RTAI
RT_TASK *task;
RTIME now;
#endif
unsigned char last_slot, next_slot;
RTIME time_in, time_diff;
int ret;
#ifdef RTAI
task = rt_task_init_schmod(nam2num("TASK0"), 0, 0, 0, SCHED_FIFO, 0xF);
printf("Started eNB thread (id %p)\n",task);
#ifndef TIMER_ONESHOT_MODE
now = rt_get_time();
ret = rt_task_make_periodic(task, now, nano2count(DAQ_PERIOD));
if (ret!=0)
printf("Problem with periodic timer\n");
#endif
#endif
#ifdef HARD_RT
rt_make_hard_real_time();
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
timing_info.time_min = 100000000ULL;
timing_info.time_max = 0;
timing_info.time_avg = 0;
timing_info.n_samples = 0;
while (!oai_exit)
{
time_in = rt_get_time_ns();
#ifdef TIMER_ONESHOT_MODE
ret = rt_sleep_ns(DAQ_PERIOD);
if (ret)
printf("eNB Frame %d, time %llu: rt_sleep_ns returned %d\n",frame,time_in,ret);
#else
rt_task_wait_period();
#endif
time_diff = rt_get_time_ns() - time_in;
if (time_diff > timing_info.time_max)
timing_info.time_max = time_diff;
if (time_diff < timing_info.time_min)
timing_info.time_min = time_diff;
timing_info.time_avg = (timing_info.time_avg*timing_info.n_samples + time_diff)/(timing_info.n_samples+1);
timing_info.n_samples++;
last_slot = (slot)%LTE_SLOTS_PER_FRAME;
if (last_slot <0)
last_slot+=20;
next_slot = (slot+3)%LTE_SLOTS_PER_FRAME;
slot++;
if (slot==20) {
slot=0;
frame++;
}
}
printf("eNB_thread: finished, ran %d times.\n",frame);
#ifdef HARD_RT
rt_make_soft_real_time();
#endif
// clean task
#ifdef RTAI
rt_task_delete(task);
#endif
printf("Task deleted. returning\n");
return 0;
}
int main(int argc, char **argv) {
#ifdef RTAI
RT_TASK *task;
RTIME period;
#else
int error_code;
#endif
int i,j,aa;
void *status;
// to make a graceful exit when ctrl-c is pressed
signal(SIGSEGV, signal_handler);
signal(SIGINT, signal_handler);
#ifndef RTAI
check_clock();
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
#ifdef RTAI
// make main thread LXRT soft realtime
task = rt_task_init_schmod(nam2num("MYTASK"), 9, 0, 0, SCHED_FIFO, 0xF);
// start realtime timer and scheduler
#ifdef TIMER_ONESHOT_MODE
rt_set_oneshot_mode();
start_rt_timer(0);
printf("started RTAI timer in oneshot mode\n");
#else
rt_set_periodic_mode();
period = start_rt_timer(nano2count(500000));
printf("started RTAI timer with period %llu ns\n",count2nano(period));
#endif
printf("Init mutex\n");
//mutex = rt_get_adr(nam2num("MUTEX"));
mutex = rt_sem_init(nam2num("MUTEX"), 1);
if (mutex==0)
{
printf("Error init mutex\n");
exit(-1);
}
else
printf("mutex=%p\n",mutex);
#endif
rt_sleep_ns(10*FRAME_PERIOD);
#ifndef RTAI
pthread_attr_init (&attr_dlsch_threads);
pthread_attr_setstacksize(&attr_dlsch_threads,OPENAIR_THREAD_STACK_SIZE);
//attr_dlsch_threads.priority = 1;
sched_param_dlsch.sched_priority = sched_get_priority_max(SCHED_FIFO); //OPENAIR_THREAD_PRIORITY;
pthread_attr_setschedparam (&attr_dlsch_threads, &sched_param_dlsch);
pthread_attr_setschedpolicy (&attr_dlsch_threads, SCHED_FIFO);
#endif
#ifdef RTAI
thread0 = rt_thread_create(eNB_thread, NULL, 100000000);
#else
error_code = pthread_create(&thread0, &attr_dlsch_threads, eNB_thread, NULL);
if (error_code!= 0) {
printf("[lte-softmodem.c] Could not allocate eNB_thread, error %d\n",error_code);
return(error_code);
}
else {
printf("[lte-softmodem.c] Allocate eNB_thread successful\n");
}
#endif
printf("eNB threads created\n");
// wait for end of program
printf("TYPE <CTRL-C> TO TERMINATE\n");
//getchar();
while (oai_exit==0) {
printf("eNB Frame %d, hw_slot %d (time %llu): period %llu, sleep time (avg/min/max/samples) %llu / %llu / %llu / %d, ratio %f\n",frame,slot,rt_get_time_ns(),DAQ_PERIOD,timing_info.time_avg,timing_info.time_min,timing_info.time_max,timing_info.n_samples,(double)timing_info.time_avg/DAQ_PERIOD);
rt_sleep_ns(100*FRAME_PERIOD);
}
// stop threads
#ifdef RTAI
rt_thread_join(thread0);
#else
pthread_join(thread0,&status);
#endif
#ifdef RTAI
stop_rt_timer();
#endif
return 0;
}
targets/RTAI/USER/stats.c deleted 100644 → 0
View file @ 337df938
/* Form definition file generated by fdesign */
#include <stdlib.h>
#include "stats.h"
/***************************************
***************************************/
FD_stats_form *
create_form_stats_form( void )
{
FL_OBJECT *obj;
FD_stats_form *fdui = fl_malloc( sizeof *fdui );
fdui->vdata = fdui->cdata = NULL;
fdui->ldata = 0;
fdui->stats_form = fl_bgn_form( FL_NO_BOX, 1115, 659 );
obj = fl_add_box( FL_UP_BOX, 0, 0, 1115, 659, "" );
fdui->stats_text = obj = fl_add_text( FL_NORMAL_TEXT, 60, 50, 1000, 580, "test" );
fl_set_object_lsize( obj, FL_TINY_SIZE );
fl_end_form( );
fdui->stats_form->fdui = fdui;
return fdui;
}
targets/RTAI/USER/stats.fd deleted 100644 → 0
View file @ 337df938
Magic: 14000
Internal Form Definition File
(do not change)
Number of forms: 1
Unit of measure: FL_COORD_PIXEL
=============== FORM ===============
Name: stats_form
Width: 1115
Height: 659
Number of Objects: 2
--------------------
class: FL_BOX
type: UP_BOX
box: 0 0 1115 659
boxtype: FL_UP_BOX
colors: FL_COL1 FL_COL1
alignment: FL_ALIGN_CENTER
style: FL_NORMAL_STYLE
size: FL_DEFAULT_SIZE
lcol: FL_BLACK
label:
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name:
callback:
argument:
--------------------
class: FL_TEXT
type: NORMAL_TEXT
box: 60 50 1000 580
boxtype: FL_FLAT_BOX
colors: FL_COL1 FL_MCOL
alignment: FL_ALIGN_LEFT|FL_ALIGN_INSIDE
style: FL_NORMAL_STYLE
size: FL_TINY_SIZE
lcol: FL_BLACK
label: test
shortcut:
resize: FL_RESIZE_ALL
gravity: FL_NoGravity FL_NoGravity
name: stats_text
callback:
argument:
==============================
create_the_forms
targets/RTAI/USER/stats.h deleted 100644 → 0
View file @ 337df938
/* Header file generated by fdesign on Thu Jun 14 17:53:15 2012 */
#ifndef FD_stats_form_h_
#define FD_stats_form_h_
#include <forms.h>
/* Callbacks, globals and object handlers */
/* Forms and Objects */
typedef struct {
FL_FORM * stats_form;
void * vdata;
char * cdata;
long ldata;
FL_OBJECT * stats_text;
} FD_stats_form;
extern FD_stats_form * create_form_stats_form( void );
#endif /* FD_stats_form_h_ */
targets/RTAI/USER/synctest.c deleted 100644 → 0
View file @ 337df938
/*******************************************************************************
Eurecom OpenAirInterface
Copyright(c) 1999 - 2011 Eurecom
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information
Openair Admin: openair_admin@eurecom.fr
Openair Tech : openair_tech@eurecom.fr
Forums : http://forums.eurecom.fsr/openairinterface
Address : Eurecom, 2229, route des crêtes, 06560 Valbonne Sophia Antipolis, France
*******************************************************************************/
/*! \file lte-softmodem.c
* \brief main program to control HW and scheduling
* \author R. Knopp, F. Kaltenberger
* \date 2012
* \version 0.1
* \company Eurecom
* \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr
* \note
* \warning
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sched.h>
#include <signal.h>
#include <execinfo.h>
#include <getopt.h>
#include "rt_wrapper.h"
#include "PHY/types.h"
//#include "PHY/defs.h"
#include "openair0_lib.h"
#include "UTIL/LOG/log.h"
#include "UTIL/LOG/vcd_signal_dumper.h"
#if defined(ENABLE_ITTI)
# include "intertask_interface_init.h"
# include "timer.h"
# if defined(ENABLE_USE_MME)
# include "s1ap_eNB.h"
# include "sctp_eNB_task.h"
# endif
#endif
#ifdef XFORMS
#include "PHY/TOOLS/lte_phy_scope.h"
#include "stats.h"
// current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
// at eNB 0, an UL scope for every UE
FD_lte_phy_scope_ue *form_ue[NUMBER_OF_UE_MAX];
FD_lte_phy_scope_enb *form_enb[NUMBER_OF_UE_MAX];
FD_stats_form *form_stats=NULL;
char title[255];
unsigned char scope_enb_num_ue = 1;
#endif //XFORMS
#ifdef EMOS
#include <gps.h>
#include <rtai_fifos.h>
//#define CHANSOUNDER_FIFO_SIZE 10485760 // 10 Mbytes FIFO
#define CHANSOUNDER_FIFO_SIZE 20971520 // 20 Mbytes FIFO
#define CHANSOUNDER_FIFO_MINOR 4 // minor of the FIFO device - this is /dev/rtf3
#define CHANSOUNDER_FIFO_DEV "/dev/rtf4"
#endif
#define TIMER_ONESHOT_MODE
#define FRAME_PERIOD 100000000ULL
#define DAQ_PERIOD 66667ULL
#define LTE_SLOTS_PER_FRAME 20
#define RESAMPLING_FACTOR 2
#define SAMPLES_PER_SLOT (15360/(1<<RESAMPLING_FACTOR))
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
#ifdef RTAI
static SEM *mutex;
//static CND *cond;
static long int thread0;
static long int thread1;
//static long int sync_thread;
#else
#define OPENAIR_THREAD_STACK_SIZE 8192
#define OPENAIR_THREAD_PRIORITY 255
pthread_t thread0;
//pthread_t thread1;
pthread_attr_t attr_dlsch_threads;
struct sched_param sched_param_dlsch;
#endif
pthread_t thread2; //xforms
pthread_t thread3; //emos
/*
static int instance_cnt=-1; //0 means worker is busy, -1 means its free
int instance_cnt_ptr_kern,*instance_cnt_ptr_user;
int pci_interface_ptr_kern;
*/
//extern unsigned int bigphys_top;
//extern unsigned int mem_base;
int card = 0;
exmimo_config_t *p_exmimo_config;
exmimo_id_t *p_exmimo_id;
volatile unsigned int *DAQ_MBOX;
int oai_exit = 0;
//int time_offset[4] = {-138,-138,-138,-138};
//int time_offset[4] = {-145,-145,-145,-145};
int time_offset[4] = {0,0,0,0};
int fs4_test=0;
char UE_flag=0;
u8 eNB_id=0,UE_id=0;
u32 carrier_freq[4]= {1907600000,1907600000,1907600000,1907600000};
struct timing_info_t {
//unsigned int frame, hw_slot, last_slot, next_slot;
RTIME time_min, time_max, time_avg, time_last, time_now;
//unsigned int mbox0, mbox1, mbox2, mbox_target;
unsigned int n_samples;
} timing_info;
extern s16* sync_corr_ue0;
extern s16 prach_ifft[4][1024*2];
int rx_input_level_dBm;
#ifdef XFORMS
extern int otg_enabled;
#else
int otg_enabled;
#endif
int number_of_cards = 1;
int mbox_bounds[20] = {8,16,24,30,38,46,54,60,68,76,84,90,98,106,114,120,128,136,144, 0}; ///boundaries of slots in terms ob mbox counter rounded up to even numbers
//int mbox_bounds[20] = {6,14,22,28,36,44,52,58,66,74,82,88,96,104,112,118,126,134,142, 148}; ///boundaries of slots in terms ob mbox counter rounded up to even numbers
int init_dlsch_threads(void);
void cleanup_dlsch_threads(void);
s32 init_rx_pdsch_thread(void);
void cleanup_rx_pdsch_thread(void);
int init_ulsch_threads(void);
void cleanup_ulsch_threads(void);
//void setup_ue_buffers(PHY_VARS_UE *phy_vars_ue, LTE_DL_FRAME_PARMS *frame_parms, int carrier);
//void setup_eNB_buffers(PHY_VARS_eNB *phy_vars_eNB, LTE_DL_FRAME_PARMS *frame_parms, int carrier);
void test_config(int card, int ant, unsigned int rf_mode, int UE_flag);
unsigned int build_rflocal(int txi, int txq, int rxi, int rxq)
{
return (txi + (txq<<6) + (rxi<<12) + (rxq<<18));
}
unsigned int build_rfdc(int dcoff_i_rxfe, int dcoff_q_rxfe)
{
return (dcoff_i_rxfe + (dcoff_q_rxfe<<8));
}
void signal_handler(int sig)
{
void *array[10];
size_t size;
if (sig==SIGSEGV) {
// get void*'s for all entries on the stack
size = backtrace(array, 10);
// print out all the frames to stderr
fprintf(stderr, "Error: signal %d:\n", sig);
backtrace_symbols_fd(array, size, 2);
exit(-1);
}
else {
oai_exit=1;
}
}
void exit_fun(const char* s)
{
void *array[10];
size_t size;
printf("Exiting: %s\n",s);
oai_exit=1;
//rt_sleep_ns(FRAME_PERIOD);
//exit (-1);
}
#ifdef XFORMS
void *scope_thread(void *arg) {
s16 prach_corr[1024], i;
char stats_buffer[16384];
//FILE *UE_stats, *eNB_stats;
int len=0;
struct sched_param sched_param;
sched_param.sched_priority = sched_get_priority_min(SCHED_FIFO)+1;
sched_setscheduler(0, SCHED_FIFO,&sched_param);
printf("Scope thread has priority %d\n",sched_param.sched_priority);
/*
if (UE_flag==1)
UE_stats = fopen("UE_stats.txt", "w");
else
eNB_stats = fopen("eNB_stats.txt", "w");
*/
while (!oai_exit) {
if (UE_flag==1) {
len = dump_ue_stats (PHY_vars_UE_g[0], stats_buffer, 0, mode,rx_input_level_dBm);
fl_set_object_label(form_stats->stats_text, stats_buffer);
//rewind (UE_stats);
//fwrite (stats_buffer, 1, len, UE_stats);
phy_scope_UE(form_ue[UE_id],
PHY_vars_UE_g[UE_id],
eNB_id,
UE_id,7);
} else {
len = dump_eNB_stats (PHY_vars_eNB_g[0], stats_buffer, 0);
fl_set_object_label(form_stats->stats_text, stats_buffer);
//rewind (eNB_stats);
//fwrite (stats_buffer, 1, len, eNB_stats);
for(UE_id=0;UE_id<scope_enb_num_ue;UE_id++) {
phy_scope_eNB(form_enb[UE_id],
PHY_vars_eNB_g[eNB_id],
UE_id);
}
}
//printf("doing forms\n");
usleep(100000);
}
//fclose (UE_stats);
//fclose (eNB_stats);
pthread_exit((void*)arg);
}
#endif
int dummy_tx_buffer[3840*4] __attribute__((aligned(16)));
#ifdef EMOS
#define NO_ESTIMATES_DISK 20 //No. of estimates that are aquired before dumped to disk
int channel_buffer_size = SAMPLES_PER_SLOT*4; //one slot, 4 byte per sample
void *emos_thread (void *arg)
{
char c;
char *fifo2file_buffer, *fifo2file_ptr;
int fifo, counter=0, bytes;
long long unsigned int total_bytes=0;
FILE *dumpfile_id;
char dumpfile_name[1024];
time_t starttime_tmp;
struct tm starttime;
time_t timer;
struct tm *now;
struct gps_data_t *gps_data = NULL;
struct gps_fix_t dummy_gps_data;
struct sched_param sched_param;
int ret;
sched_param.sched_priority = sched_get_priority_max(SCHED_FIFO)-1;
sched_setscheduler(0, SCHED_FIFO,&sched_param);
printf("EMOS thread has priority %d\n",sched_param.sched_priority);
timer = time(NULL);
now = localtime(&timer);
memset(&dummy_gps_data,1,sizeof(struct gps_fix_t));
#if GPSD_API_MAJOR_VERSION>=5
ret = gps_open("127.0.0.1","2947",gps_data);
if (ret!=0)
#else
gps_data = gps_open("127.0.0.1","2947");
if (gps_data == NULL)
#endif
{
printf("[EMOS] Could not open GPS\n");
//exit(-1);
}
#if GPSD_API_MAJOR_VERSION>=4
else if (gps_stream(gps_data, WATCH_ENABLE,NULL) != 0)
#else
else if (gps_query(gps_data, "w+x") != 0)
#endif
{
//sprintf(tmptxt,"Error sending command to GPS, gps_data = %x", gps_data);
printf("[EMOS] Error sending command to GPS\n");
//exit(-1);
}
else
printf("[EMOS] Opened GPS, gps_data=%p\n", gps_data);
/*
if (UE_flag==0)
channel_buffer_size = sizeof(fifo_dump_emos_eNB);
else
channel_buffer_size = sizeof(fifo_dump_emos_UE);
*/
// allocate memory for NO_FRAMES_DISK channes estimations
fifo2file_buffer = malloc(NO_ESTIMATES_DISK*channel_buffer_size);
fifo2file_ptr = fifo2file_buffer;
if (fifo2file_buffer == NULL)
{
printf("[EMOS] Cound not allocate memory for fifo2file_buffer\n");
exit(EXIT_FAILURE);
}
if ((fifo = open(CHANSOUNDER_FIFO_DEV, O_RDONLY)) < 0)
{
fprintf(stderr, "[EMOS] Error opening the fifo\n");
exit(EXIT_FAILURE);
}
time(&starttime_tmp);
localtime_r(&starttime_tmp,&starttime);
snprintf(dumpfile_name,1024,"/tmp/%s_data_%d%02d%02d_%02d%02d%02d.EMOS",
(UE_flag==0) ? "eNB" : "UE",
1900+starttime.tm_year, starttime.tm_mon+1, starttime.tm_mday, starttime.tm_hour, starttime.tm_min, starttime.tm_sec);
dumpfile_id = fopen(dumpfile_name,"w");
if (dumpfile_id == NULL)
{
fprintf(stderr, "[EMOS] Error opening dumpfile %s\n",dumpfile_name);
exit(EXIT_FAILURE);
}
printf("[EMOS] starting dump, channel_buffer_size=%d ...\n",channel_buffer_size);
while (!oai_exit)
{
bytes = rtf_read_timed(fifo, fifo2file_ptr, channel_buffer_size,100);
if (bytes<=0)
continue;
/*
if (UE_flag==0)
printf("eNB: count %d, frame %d, read: %d bytes from the fifo\n",counter, ((fifo_dump_emos_eNB*)fifo2file_ptr)->frame_tx,bytes);
else
printf("UE: count %d, frame %d, read: %d bytes from the fifo\n",counter, ((fifo_dump_emos_UE*)fifo2file_ptr)->frame_rx,bytes);
*/
fifo2file_ptr += channel_buffer_size;
counter ++;
total_bytes += bytes;
if ((counter%NO_ESTIMATES_DISK)==0)
{
//reset stuff
fifo2file_ptr = fifo2file_buffer;
//counter = 0;
//flush buffer to disk
if (fwrite(fifo2file_buffer, sizeof(char), NO_ESTIMATES_DISK*channel_buffer_size, dumpfile_id) != NO_ESTIMATES_DISK*channel_buffer_size)
{
fprintf(stderr, "[EMOS] Error writing to dumpfile\n");
exit(EXIT_FAILURE);
}
/*
if (gps_data)
{
if (gps_poll(gps_data) != 0) {
printf("[EMOS] problem polling data from gps\n");
}
else {
printf("[EMOS] lat %g, lon %g\n",gps_data->fix.latitude,gps_data->fix.longitude);
}
if (fwrite(&(gps_data->fix), sizeof(char), sizeof(struct gps_fix_t), dumpfile_id) != sizeof(struct gps_fix_t))
{
printf("[EMOS] Error writing to dumpfile, stopping recording\n");
exit(EXIT_FAILURE);
}
}
else
{
printf("[EMOS] WARNING: No GPS data available, storing dummy packet\n");
if (fwrite(&(dummy_gps_data), sizeof(char), sizeof(struct gps_fix_t), dumpfile_id) != sizeof(struct gps_fix_t))
{
printf("[EMOS] Error writing to dumpfile, stopping recording\n");
exit(EXIT_FAILURE);
}
}
*/
}
if ((counter%2000)==0)
printf("[EMOS] count %d (%d sec), total bytes wrote %llu\n", counter, counter/2000, total_bytes);
}
free(fifo2file_buffer);
fclose(dumpfile_id);
close(fifo);
pthread_exit((void*) arg);
}
#endif
/* This is the main eNB thread. It gets woken up by the kernel driver using the RTAI message mechanism (rt_send and rt_receive). */
static void *eNB_thread(void *arg)
{
#ifdef RTAI
RT_TASK *task;
RTIME now;
#endif
unsigned char slot=0,last_slot, next_slot;
int hw_slot,frame=0;
unsigned int msg1;
unsigned int aa,slot_offset, slot_offset_F;
int diff;
int delay_cnt;
RTIME time_in, time_diff;
int mbox_target=0,mbox_current=0;
int i,ret;
int tx_offset;
int bytes;
#ifdef RTAI
task = rt_task_init_schmod(nam2num("TASK0"), 0, 0, 0, SCHED_FIFO, 0xF);
LOG_D(HW,"Started eNB thread (id %p)\n",task);
#ifndef TIMER_ONESHOT_MODE
now = rt_get_time();
ret = rt_task_make_periodic(task, now, nano2count(500000LL));
if (ret!=0)
LOG_E(HW,"Problem with periodic timer\n");
#endif
#endif
#ifdef HARD_RT
rt_make_hard_real_time();
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
timing_info.time_min = 100000000ULL;
timing_info.time_max = 0;
timing_info.time_avg = 0;
timing_info.n_samples = 0;
while (!oai_exit)
{
hw_slot = (((((volatile unsigned int *)DAQ_MBOX)[0]+1)%150)<<1)/15;
//LOG_D(HW,"eNB frame %d, time %llu: slot %d, hw_slot %d (mbox %d)\n",frame,rt_get_time_ns(),slot,hw_slot,((unsigned int *)DAQ_MBOX)[0]);
//this is the mbox counter where we should be
//mbox_target = ((((slot+1)%20)*15+1)>>1)%150;
mbox_target = mbox_bounds[slot];
//this is the mbox counter where we are
mbox_current = ((volatile unsigned int *)DAQ_MBOX)[0];
//this is the time we need to sleep in order to synchronize with the hw (in multiples of DAQ_PERIOD)
if ((mbox_current>=135) && (mbox_target<15)) //handle the frame wrap-arround
diff = 150-mbox_current+mbox_target;
else if ((mbox_current<15) && (mbox_target>=135))
diff = -150+mbox_target-mbox_current;
else
diff = mbox_target - mbox_current;
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_SLOT_NUMBER_ENB, slot);
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_ENB, frame);
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_DAQ_MBOX, *((volatile unsigned int *) openair0_exmimo_pci[card].rxcnt_ptr[0]));
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_DIFF, diff);
time_in = rt_get_time_ns();
//LOG_D(HW,"eNB Frame %d delaycnt %d : hw_slot %d (%d), slot %d, (slot+1)*15=%d, diff %d, time %llu\n",frame,delay_cnt,hw_slot,((unsigned int *)DAQ_MBOX)[0],slot,(((slot+1)*15)>>1),diff,time_in);
//LOG_D(HW,"eNB Frame %d, time %llu: sleeping for %llu (slot %d, hw_slot %d, diff %d, mbox %d, delay_cnt %d)\n", frame, time_in, diff*DAQ_PERIOD,slot,hw_slot,diff,((volatile unsigned int *)DAQ_MBOX)[0],delay_cnt);
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_RT_SLEEP,1);
#ifdef TIMER_ONESHOT_MODE
//ret = rt_sleep_ns(DAQ_PERIOD * (slot%4==0?6:8));
ret = rt_sleep_ns(500000);
if (ret)
LOG_D(HW,"eNB Frame %d, time %llu: rt_sleep_ns returned %d\n",frame, time_in);
#else
rt_task_wait_period();
#endif
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_RT_SLEEP,0);
//hw_slot = (((((volatile unsigned int *)DAQ_MBOX)[0]+1)%150)<<1)/15;
//LOG_D(HW,"eNB Frame %d : hw_slot %d, time %llu\n",frame,hw_slot,rt_get_time_ns());
mbox_current = ((volatile unsigned int *)DAQ_MBOX)[0];
if ((mbox_current>=135) && (mbox_target<15)) //handle the frame wrap-arround
diff = 150-mbox_current+mbox_target;
else if ((mbox_current<15) && (mbox_target>=135))
diff = -150+mbox_target-mbox_current;
else
diff = mbox_target - mbox_current;
last_slot = (slot)%LTE_SLOTS_PER_FRAME;
if (last_slot <0)
last_slot+=20;
next_slot = (slot+3)%LTE_SLOTS_PER_FRAME;
slot++;
if (slot==20) {
slot=0;
frame++;
}
if (frame==1000)
oai_exit=1;
#if defined(ENABLE_ITTI)
itti_update_lte_time(frame, slot);
#endif
}
LOG_D(HW,"eNB_thread: finished, ran %d times.\n",frame);
#ifdef HARD_RT
rt_make_soft_real_time();
#endif
// clean task
#ifdef RTAI
rt_task_delete(task);
#endif
LOG_D(HW,"Task deleted. returning\n");
return 0;
}
int main(int argc, char **argv) {
#ifdef RTAI
RT_TASK *task;
RTIME period;
#endif
int i,j,aa;
void *status;
/*
u32 rf_mode_max[4] = {55759,55759,55759,55759};
u32 rf_mode_med[4] = {39375,39375,39375,39375};
u32 rf_mode_byp[4] = {22991,22991,22991,22991};
*/
u32 my_rf_mode = RXEN + TXEN + TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM + DMAMODE_RX + DMAMODE_TX;
u32 rf_mode_base = TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM;
u32 rf_mode[4] = {my_rf_mode,0,0,0};
u32 rf_local[4] = {8255000,8255000,8255000,8255000}; // UE zepto
//{8254617, 8254617, 8254617, 8254617}; //eNB khalifa
//{8255067,8254810,8257340,8257340}; // eNB PETRONAS
u32 rf_vcocal[4] = {910,910,910,910};
u32 rf_vcocal_850[4] = {2015, 2015, 2015, 2015};
u32 rf_rxdc[4] = {32896,32896,32896,32896};
u32 rxgain[4] = {20,20,20,20};
u32 txgain[4] = {20,20,20,20};
u16 Nid_cell = 0;
u8 cooperation_flag=0, transmission_mode=1, abstraction_flag=0;
u8 beta_ACK=0,beta_RI=0,beta_CQI=2;
int c;
char do_forms=0;
unsigned int fd;
unsigned int tcxo = 114;
int amp;
u8 prach_fmt;
int N_ZC;
char rxg_fname[100];
char txg_fname[100];
char rflo_fname[100];
char rfdc_fname[100];
FILE *rxg_fd=NULL;
FILE *txg_fd=NULL;
FILE *rflo_fd=NULL;
FILE *rfdc_fd=NULL;
unsigned int rxg_max[4]={133,133,133,133}, rxg_med[4]={127,127,127,127}, rxg_byp[4]={120,120,120,120};
int tx_max_power=0;
char line[1000];
int l;
int ret, ant;
int ant_offset=0;
int error_code;
char *itti_dump_file = NULL;
const struct option long_options[] = {
{"calib-ue-rx", required_argument, NULL, 256},
{"calib-ue-rx-med", required_argument, NULL, 257},
{"calib-ue-rx-byp", required_argument, NULL, 258},
{"debug-ue-prach", no_argument, NULL, 259},
{"no-L2-connect", no_argument, NULL, 260},
{NULL, 0, NULL, 0}};
//mode = normal_txrx;
while ((c = getopt_long (argc, argv, "C:K:O:ST:UdF:V",long_options,NULL)) != -1)
{
switch (c)
{
case 'V':
ouput_vcd = 1;
break;
case 'd':
do_forms=1;
break;
case 'U':
UE_flag = 1;
break;
case 'C':
carrier_freq[0] = atoi(optarg);
carrier_freq[1] = atoi(optarg);
carrier_freq[2] = atoi(optarg);
carrier_freq[3] = atoi(optarg);
break;
case 'S':
fs4_test=1;
break;
case 'T':
tcxo=atoi(optarg);
break;
case 'K':
#if defined(ENABLE_ITTI)
itti_dump_file = strdup(optarg);
#else
printf("-K option is disabled when ENABLE_ITTI is not defined\n");
#endif
break;
case 'O':
#if defined(ENABLE_USE_MME)
EPC_MODE_ENABLED = 1;
if (optarg == NULL) /* No IP address provided: use localhost */
{
memcpy(&EPC_MODE_MME_ADDRESS[0], "127.0.0.1", 10);
} else {
u8 ip_length = strlen(optarg) + 1;
memcpy(&EPC_MODE_MME_ADDRESS[0], optarg,
ip_length > 16 ? 16 : ip_length);
}
#else
printf("You enabled mme mode without s1ap compiled...\n");
#endif
break;
case 'F':
sprintf(rxg_fname,"%srxg.lime",optarg);
rxg_fd = fopen(rxg_fname,"r");
if (rxg_fd) {
printf("Loading RX Gain parameters from %s\n",rxg_fname);
l=0;
while (fgets(line, sizeof(line), rxg_fd)) {
if ((strlen(line)==0) || (*line == '#')) continue; //ignore empty or comment lines
else {
if (l==0) sscanf(line,"%d %d %d %d",&rxg_max[0],&rxg_max[1],&rxg_max[2],&rxg_max[3]);
if (l==1) sscanf(line,"%d %d %d %d",&rxg_med[0],&rxg_med[1],&rxg_med[2],&rxg_med[3]);
if (l==2) sscanf(line,"%d %d %d %d",&rxg_byp[0],&rxg_byp[1],&rxg_byp[2],&rxg_byp[3]);
l++;
}
}
}
else
printf("%s not found, running with defaults\n",rxg_fname);
sprintf(txg_fname,"%stxg.lime",optarg);
txg_fd = fopen(txg_fname,"r");
if (txg_fd) {
printf("Loading TX Gain parameters from %s\n",txg_fname);
l=0;
while (fgets(line, sizeof(line), txg_fd)) {
if ((strlen(line)==0) || (*line == '#')) {
continue; //ignore empty or comment lines
}
else {
if (l==0) sscanf(line,"%d %d %d %d",&txgain[0],&txgain[1],&txgain[2],&txgain[3]);
if (l==1) sscanf(line,"%d",&tx_max_power);
l++;
}
}
}
else
printf("%s not found, running with defaults\n",txg_fname);
sprintf(rflo_fname,"%srflo.lime",optarg);
rflo_fd = fopen(rflo_fname,"r");
if (rflo_fd) {
printf("Loading RF LO parameters from %s\n",rflo_fname);
fscanf(rflo_fd,"%d %d %d %d",&rf_local[0],&rf_local[1],&rf_local[2],&rf_local[3]);
}
else
printf("%s not found, running with defaults\n",rflo_fname);
sprintf(rfdc_fname,"%srfdc.lime",optarg);
rfdc_fd = fopen(rfdc_fname,"r");
if (rfdc_fd) {
printf("Loading RF DC parameters from %s\n",rfdc_fname);
fscanf(rfdc_fd,"%d %d %d %d",&rf_rxdc[0],&rf_rxdc[1],&rf_rxdc[2],&rf_rxdc[3]);
}
else
printf("%s not found, running with defaults\n",rfdc_fname);
break;
/*
case 256:
mode = rx_calib_ue;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA max), input level %d dBm\n",rx_input_level_dBm);
break;
case 257:
mode = rx_calib_ue_med;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA med), input level %d dBm\n",rx_input_level_dBm);
break;
case 258:
mode = rx_calib_ue_byp;
rx_input_level_dBm = atoi(optarg);
printf("Running with UE calibration on (LNA byp), input level %d dBm\n",rx_input_level_dBm);
break;
case 259:
mode = debug_prach;
break;
case 260:
mode = no_L2_connect;
break;
*/
default:
break;
}
}
if (UE_flag==1)
printf("configuring for UE\n");
else
printf("configuring for eNB\n");
//randominit (0);
//set_taus_seed (0);
// initialize the log (see log.h for details)
logInit();
#if defined(ENABLE_ITTI)
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info, messages_definition_xml, itti_dump_file);
# if defined(ENABLE_USE_MME)
if (itti_create_task(TASK_SCTP, sctp_eNB_task, NULL) < 0) {
LOG_E(EMU, "Create task failed");
LOG_D(EMU, "Initializing SCTP task interface: FAILED\n");
return -1;
}
if (itti_create_task(TASK_S1AP, s1ap_eNB_task, NULL) < 0) {
LOG_E(EMU, "Create task failed");
LOG_D(EMU, "Initializing S1AP task interface: FAILED\n");
return -1;
}
# endif
if (itti_create_task(TASK_L2L1, l2l1_task, NULL) < 0) {
LOG_E(EMU, "Create task failed");
LOG_D(EMU, "Initializing L2L1 task interface: FAILED\n");
return -1;
}
// Handle signals until all tasks are terminated
// itti_wait_tasks_end();
#endif
if (ouput_vcd) {
if (UE_flag==1)
vcd_signal_dumper_init("/tmp/openair_dump_UE.vcd");
else
vcd_signal_dumper_init("/tmp/openair_dump_eNB.vcd");
}
#ifdef NAS_NETLINK
netlink_init();
#endif
// to make a graceful exit when ctrl-c is pressed
signal(SIGSEGV, signal_handler);
signal(SIGINT, signal_handler);
#ifndef RTAI
check_clock();
#endif
g_log->log_component[HW].level = LOG_DEBUG;
g_log->log_component[HW].flag = LOG_HIGH;
#ifdef OPENAIR2
g_log->log_component[PHY].level = LOG_INFO;
#else
g_log->log_component[PHY].level = LOG_INFO;
#endif
g_log->log_component[PHY].flag = LOG_HIGH;
g_log->log_component[MAC].level = LOG_INFO;
g_log->log_component[MAC].flag = LOG_HIGH;
g_log->log_component[RLC].level = LOG_INFO;
g_log->log_component[RLC].flag = LOG_HIGH;
g_log->log_component[PDCP].level = LOG_INFO;
g_log->log_component[PDCP].flag = LOG_HIGH;
g_log->log_component[OTG].level = LOG_INFO;
g_log->log_component[OTG].flag = LOG_HIGH;
g_log->log_component[RRC].level = LOG_INFO;
g_log->log_component[RRC].flag = LOG_HIGH;
// Initialize card
ret = openair0_open();
if ( ret != 0 ) {
if (ret == -1)
printf("Error opening /dev/openair0");
if (ret == -2)
printf("Error mapping bigshm");
if (ret == -3)
printf("Error mapping RX or TX buffer");
return(ret);
}
printf ("Detected %d number of cards, %d number of antennas.\n", openair0_num_detected_cards, openair0_num_antennas[card]);
p_exmimo_config = openair0_exmimo_pci[card].exmimo_config_ptr;
p_exmimo_id = openair0_exmimo_pci[card].exmimo_id_ptr;
printf("Card %d: ExpressMIMO %d, HW Rev %d, SW Rev 0x%d\n", card, p_exmimo_id->board_exmimoversion, p_exmimo_id->board_hwrev, p_exmimo_id->board_swrev);
if (p_exmimo_id->board_swrev>=BOARD_SWREV_CNTL2)
p_exmimo_config->framing.eNB_flag = 0;
else
p_exmimo_config->framing.eNB_flag = !UE_flag;
p_exmimo_config->framing.tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_LSB;
for (ant=0; ant<4; ant++)
p_exmimo_config->framing.resampling_factor[ant] = RESAMPLING_FACTOR;
/*
for (ant=0;ant<max(frame_parms->nb_antennas_tx,frame_parms->nb_antennas_rx);ant++)
p_exmimo_config->rf.rf_mode[ant] = rf_mode_base;
for (ant=0;ant<frame_parms->nb_antennas_tx;ant++)
p_exmimo_config->rf.rf_mode[ant] += (TXEN + DMAMODE_TX);
for (ant=0;ant<frame_parms->nb_antennas_rx;ant++)
p_exmimo_config->rf.rf_mode[ant] += (RXEN + DMAMODE_RX);
for (ant=max(frame_parms->nb_antennas_tx,frame_parms->nb_antennas_rx);ant<4;ant++) {
p_exmimo_config->rf.rf_mode[ant] = 0;
carrier_freq[ant] = 0; //this turns off all other LIMEs
}
*/
ant_offset = 0;
for (ant=0; ant<4; ant++) {
if (ant==ant_offset) {
//if (1) {
p_exmimo_config->rf.rf_mode[ant] = rf_mode_base;
//p_exmimo_config->rf.rf_mode[ant] += (TXEN + DMAMODE_TX);
p_exmimo_config->rf.rf_mode[ant] += (RXEN + DMAMODE_RX);
}
else {
p_exmimo_config->rf.rf_mode[ant] = 0;
carrier_freq[ant] = 0; //this turns off all other LIMEs
}
}
for (ant = 0; ant<4; ant++) {
p_exmimo_config->rf.do_autocal[ant] = 1;
p_exmimo_config->rf.rf_freq_rx[ant] = carrier_freq[ant];
p_exmimo_config->rf.rf_freq_tx[ant] = carrier_freq[ant];
p_exmimo_config->rf.rx_gain[ant][0] = rxgain[ant];
p_exmimo_config->rf.tx_gain[ant][0] = txgain[ant];
p_exmimo_config->rf.rf_local[ant] = rf_local[ant];
p_exmimo_config->rf.rf_rxdc[ant] = rf_rxdc[ant];
if ((carrier_freq[ant] >= 850000000) && (carrier_freq[ant] <= 865000000)) {
p_exmimo_config->rf.rf_vcocal[ant] = rf_vcocal_850[ant];
p_exmimo_config->rf.rffe_band_mode[ant] = DD_TDD;
}
else if ((carrier_freq[ant] >= 1900000000) && (carrier_freq[ant] <= 2000000000)) {
p_exmimo_config->rf.rf_vcocal[ant] = rf_vcocal[ant];
p_exmimo_config->rf.rffe_band_mode[ant] = B19G_TDD;
}
else {
p_exmimo_config->rf.rf_vcocal[ant] = rf_vcocal[ant];
p_exmimo_config->rf.rffe_band_mode[ant] = 0;
}
p_exmimo_config->rf.rffe_gain_txlow[ant] = 31;
p_exmimo_config->rf.rffe_gain_txhigh[ant] = 31;
p_exmimo_config->rf.rffe_gain_rxfinal[ant] = 52;
p_exmimo_config->rf.rffe_gain_rxlow[ant] = 31;
}
number_of_cards = openair0_num_detected_cards;
/*
if (p_exmimo_id->board_exmimoversion==1) //ExpressMIMO1
openair_daq_vars.timing_advance = 138;
else //ExpressMIMO2
openair_daq_vars.timing_advance = 0;
*/
openair0_dump_config(card);
printf("EXMIMO_CONFIG: rf_mode 0x %x %x %x %x, [0]: TXRXEn %d, TXLPFEn %d, TXLPF %d, RXLPFEn %d, RXLPF %d, RFBB %d, LNA %d, LNAGain %d, RXLPFMode %d, SWITCH %d, rf_rxdc %d, rf_local %d, rf_vcocal %d\n",
p_exmimo_config->rf.rf_mode[0],
p_exmimo_config->rf.rf_mode[1],
p_exmimo_config->rf.rf_mode[2],
p_exmimo_config->rf.rf_mode[3],
(p_exmimo_config->rf.rf_mode[0]&3), // RXen+TXen
(p_exmimo_config->rf.rf_mode[0]&4)>>2, //TXLPFen
(p_exmimo_config->rf.rf_mode[0]&TXLPFMASK)>>3, //TXLPF
(p_exmimo_config->rf.rf_mode[0]&128)>>7, //RXLPFen
(p_exmimo_config->rf.rf_mode[0]&RXLPFMASK)>>8, //TXLPF
(p_exmimo_config->rf.rf_mode[0]&RFBBMASK)>>16, // RFBB mode
(p_exmimo_config->rf.rf_mode[0]&LNAMASK)>>12, // RFBB mode
(p_exmimo_config->rf.rf_mode[0]&LNAGAINMASK)>>14, // RFBB mode
(p_exmimo_config->rf.rf_mode[0]&RXLPFMODEMASK)>>19, // RXLPF mode
(p_exmimo_config->framing.tdd_config&TXRXSWITCH_MASK)>>1, // Switch mode
p_exmimo_config->rf.rf_rxdc[0],
p_exmimo_config->rf.rf_local[0],
p_exmimo_config->rf.rf_vcocal[0]);
for (ant=0;ant<4;ant++)
p_exmimo_config->rf.do_autocal[ant] = 0;
#ifdef EMOS
error_code = rtf_create(CHANSOUNDER_FIFO_MINOR,CHANSOUNDER_FIFO_SIZE);
if (error_code==0)
printf("[OPENAIR][SCHED][INIT] Created EMOS FIFO %d\n",CHANSOUNDER_FIFO_MINOR);
else if (error_code==ENODEV)
printf("[OPENAIR][SCHED][INIT] Problem: EMOS FIFO %d is greater than or equal to RTF_NO\n",CHANSOUNDER_FIFO_MINOR);
else if (error_code==ENOMEM)
printf("[OPENAIR][SCHED][INIT] Problem: cannot allocate memory for EMOS FIFO %d\n",CHANSOUNDER_FIFO_MINOR);
else
printf("[OPENAIR][SCHED][INIT] Problem creating EMOS FIFO %d, error_code %d\n",CHANSOUNDER_FIFO_MINOR,error_code);
#endif
mlockall(MCL_CURRENT | MCL_FUTURE);
#ifdef RTAI
// make main thread LXRT soft realtime
task = rt_task_init_schmod(nam2num("MYTASK"), 9, 0, 0, SCHED_FIFO, 0xF);
// start realtime timer and scheduler
#ifdef TIMER_ONESHOT_MODE
rt_set_oneshot_mode();
start_rt_timer(0);
printf("started RTAI timer inoneshot mode\n");
#else
rt_set_periodic_mode();
period = start_rt_timer(nano2count(500000));
printf("started RTAI timer with period %llu ns\n",count2nano(period));
#endif
printf("Init mutex\n");
//mutex = rt_get_adr(nam2num("MUTEX"));
mutex = rt_sem_init(nam2num("MUTEX"), 1);
if (mutex==0)
{
printf("Error init mutex\n");
exit(-1);
}
else
printf("mutex=%p\n",mutex);
#endif
DAQ_MBOX = (volatile unsigned int *) openair0_exmimo_pci[card].rxcnt_ptr[0];
// this starts the DMA transfers
if (UE_flag!=1)
openair0_start_rt_acquisition(card);
#ifdef XFORMS
if (do_forms==1) {
fl_initialize (&argc, argv, NULL, 0, 0);
form_stats = create_form_stats_form();
if (UE_flag==1) {
form_ue[UE_id] = create_lte_phy_scope_ue();
sprintf (title, "LTE DL SCOPE UE");
fl_show_form (form_ue[UE_id]->lte_phy_scope_ue, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
} else {
for(UE_id=0;UE_id<scope_enb_num_ue;UE_id++) {
form_enb[UE_id] = create_lte_phy_scope_enb();
sprintf (title, "UE%d LTE UL SCOPE eNB",UE_id+1);
fl_show_form (form_enb[UE_id]->lte_phy_scope_enb, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
}
}
fl_show_form (form_stats->stats_form, FL_PLACE_HOTSPOT, FL_FULLBORDER, "stats");
if (UE_flag==0) {
for (UE_id=0;UE_id<scope_enb_num_ue;UE_id++) {
if (otg_enabled) {
fl_set_button(form_enb[UE_id]->button_0,1);
fl_set_object_label(form_enb[UE_id]->button_0,"DL Traffic ON");
}
else {
fl_set_button(form_enb[UE_id]->button_0,0);
fl_set_object_label(form_enb[UE_id]->button_0,"DL Traffic OFF");
}
}
}
else {
if (openair_daq_vars.use_ia_receiver) {
fl_set_button(form_ue[UE_id]->button_0,1);
fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver ON");
}
else {
fl_set_button(form_ue[UE_id]->button_0,0);
fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver OFF");
}
}
ret = pthread_create(&thread2, NULL, scope_thread, NULL);
printf("Scope thread created, ret=%d\n",ret);
}
#endif
#ifdef EMOS
ret = pthread_create(&thread3, NULL, emos_thread, NULL);
printf("EMOS thread created, ret=%d\n",ret);
#endif
rt_sleep_ns(10*FRAME_PERIOD);
#ifndef RTAI
pthread_attr_init (&attr_dlsch_threads);
pthread_attr_setstacksize(&attr_dlsch_threads,OPENAIR_THREAD_STACK_SIZE);
//attr_dlsch_threads.priority = 1;
sched_param_dlsch.sched_priority = sched_get_priority_max(SCHED_FIFO); //OPENAIR_THREAD_PRIORITY;
pthread_attr_setschedparam (&attr_dlsch_threads, &sched_param_dlsch);
pthread_attr_setschedpolicy (&attr_dlsch_threads, SCHED_FIFO);
#endif
// start the main thread
if (UE_flag == 1) {
/*
#ifdef RTAI
thread1 = rt_thread_create(UE_thread, NULL, 100000000);
#else
error_code = pthread_create(&thread1, &attr_dlsch_threads, UE_thread, NULL);
if (error_code!= 0) {
LOG_D(HW,"[lte-softmodem.c] Could not allocate UE_thread, error %d\n",error_code);
return(error_code);
}
else {
LOG_D(HW,"[lte-softmodem.c] Allocate UE_thread successful\n");
}
#endif
#ifdef DLSCH_THREAD
init_rx_pdsch_thread();
rt_sleep_ns(FRAME_PERIOD/10);
init_dlsch_threads();
#endif
printf("UE threads created\n");
*/
}
else {
#ifdef RTAI
thread0 = rt_thread_create(eNB_thread, NULL, 100000000);
#else
error_code = pthread_create(&thread0, &attr_dlsch_threads, eNB_thread, NULL);
if (error_code!= 0) {
LOG_D(HW,"[lte-softmodem.c] Could not allocate eNB_thread, error %d\n",error_code);
return(error_code);
}
else {
LOG_D(HW,"[lte-softmodem.c] Allocate eNB_thread successful\n");
}
#endif
#ifdef ULSCH_THREAD
init_ulsch_threads();
#endif
printf("eNB threads created\n");
}
// wait for end of program
printf("TYPE <CTRL-C> TO TERMINATE\n");
//getchar();
while (oai_exit==0)
rt_sleep_ns(FRAME_PERIOD);
// stop threads
#ifdef XFORMS
printf("waiting for XFORMS thread\n");
if (do_forms==1)
{
pthread_join(thread2,&status);
fl_hide_form(form_stats->stats_form);
fl_free_form(form_stats->stats_form);
if (UE_flag==1) {
fl_hide_form(form_ue[UE_id]->lte_phy_scope_ue);
fl_free_form(form_ue[UE_id]->lte_phy_scope_ue);
} else {
for(UE_id=0;UE_id<scope_enb_num_ue;UE_id++) {
fl_hide_form(form_enb[UE_id]->lte_phy_scope_enb);
fl_free_form(form_enb[UE_id]->lte_phy_scope_enb);
}
}
}
#endif
printf("stopping MODEM threads\n");
// cleanup
if (UE_flag == 1) {
/*
#ifdef RTAI
rt_thread_join(thread1);
#else
pthread_join(thread1,&status);
#endif
#ifdef DLSCH_THREAD
cleanup_dlsch_threads();
cleanup_rx_pdsch_thread();
#endif
*/
}
else {
#ifdef RTAI
rt_thread_join(thread0);
#else
pthread_join(thread0,&status);
#endif
#ifdef ULSCH_THREAD
cleanup_ulsch_threads();
#endif
}
#ifdef OPENAIR2
//cleanup_pdcp_thread();
#endif
#ifdef RTAI
stop_rt_timer();
#endif
printf("stopping card\n");
openair0_stop(card);
printf("closing openair0_lib\n");
openair0_close();
#ifdef EMOS
printf("waiting for EMOS thread\n");
pthread_cancel(thread3);
pthread_join(thread3,&status);
#endif
#ifdef EMOS
error_code = rtf_destroy(CHANSOUNDER_FIFO_MINOR);
printf("[OPENAIR][SCHED][CLEANUP] EMOS FIFO closed, error_code %d\n", error_code);
#endif
if (ouput_vcd)
vcd_signal_dumper_close();
logClean();
return 0;
}
void test_config(int card, int ant, unsigned int rf_mode, int UE_flag) {
p_exmimo_config->framing.eNB_flag = !UE_flag;
p_exmimo_config->framing.tdd_config = 0;
p_exmimo_config->framing.resampling_factor[ant] = 2;
p_exmimo_config->rf.rf_freq_rx[ant] = 1907600000;
p_exmimo_config->rf.rf_freq_tx[ant] = 1907600000;;
p_exmimo_config->rf.rx_gain[ant][0] = 20;
p_exmimo_config->rf.tx_gain[ant][0] = 10;
p_exmimo_config->rf.rf_mode[ant] = rf_mode;
p_exmimo_config->rf.rf_local[ant] = build_rflocal(20,25,26,04);
p_exmimo_config->rf.rf_rxdc[ant] = build_rfdc(128, 128);
p_exmimo_config->rf.rf_vcocal[ant] = (0xE<<6) + 0xE;
}
/*
void setup_ue_buffers(PHY_VARS_UE *phy_vars_ue, LTE_DL_FRAME_PARMS *frame_parms, int carrier) {
int i;
if (phy_vars_ue) {
if ((frame_parms->nb_antennas_rx>1) && (carrier>0)) {
printf("RX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
if ((frame_parms->nb_antennas_tx>1) && (carrier>0)) {
printf("TX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
// replace RX signal buffers with mmaped HW versions
for (i=0;i<frame_parms->nb_antennas_rx;i++) {
free(phy_vars_ue->lte_ue_common_vars.rxdata[i]);
phy_vars_ue->lte_ue_common_vars.rxdata[i] = (s32*) openair0_exmimo_pci[card].adc_head[i+carrier];
printf("rxdata[%d] @ %p\n",i,phy_vars_ue->lte_ue_common_vars.rxdata[i]);
}
for (i=0;i<frame_parms->nb_antennas_tx;i++) {
free(phy_vars_ue->lte_ue_common_vars.txdata[i]);
phy_vars_ue->lte_ue_common_vars.txdata[i] = (s32*) openair0_exmimo_pci[card].dac_head[i+carrier];
printf("txdata[%d] @ %p\n",i,phy_vars_ue->lte_ue_common_vars.txdata[i]);
}
}
}
void setup_eNB_buffers(PHY_VARS_eNB *phy_vars_eNB, LTE_DL_FRAME_PARMS *frame_parms, int carrier) {
int i,j;
if (phy_vars_eNB) {
if ((frame_parms->nb_antennas_rx>1) && (carrier>0)) {
printf("RX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
if ((frame_parms->nb_antennas_tx>1) && (carrier>0)) {
printf("TX antennas > 1 and carrier > 0 not possible\n");
exit(-1);
}
// replace RX signal buffers with mmaped HW versions
for (i=0;i<frame_parms->nb_antennas_rx;i++) {
free(phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i]);
phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i] = (s32*) openair0_exmimo_pci[card].adc_head[i+carrier];
printf("rxdata[%d] @ %p\n",i,phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i]);
for (j=0;j<16;j++) {
printf("rxbuffer %d: %x\n",j,phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i][j]);
phy_vars_eNB->lte_eNB_common_vars.rxdata[0][i][j] = 16-j;
}
}
for (i=0;i<frame_parms->nb_antennas_tx;i++) {
free(phy_vars_eNB->lte_eNB_common_vars.txdata[0][i]);
phy_vars_eNB->lte_eNB_common_vars.txdata[0][i] = (s32*) openair0_exmimo_pci[card].dac_head[i+carrier];
printf("txdata[%d] @ %p\n",i,phy_vars_eNB->lte_eNB_common_vars.txdata[0][i]);
for (j=0;j<16;j++) {
printf("txbuffer %d: %x\n",j,phy_vars_eNB->lte_eNB_common_vars.txdata[0][i][j]);
phy_vars_eNB->lte_eNB_common_vars.txdata[0][i][j] = 16-j;
}
}
}
}
*/
targets/RTAI/USER/ue1rflo.lime deleted 100644 → 0
View file @ 337df938
8254752 8254752 8254752 8254752
targets/RTAI/USER/ue1rxg.lime deleted 100644 → 0
View file @ 337df938
# this file contains the calibration values to compute the RSSI
# we can use three different gain stages (high, low, med) as well as a gain factor for fine tuning
# the three lines in this file gives the total rx gain in dB for the three gain stages if the rx gain is set to max 30dB
# high gain
128 128 128 128
# med gain
127 127 127 127
# low gain
120 120 120 120
targets/RTAI/USER/ue1txg.lime deleted 100644 → 0
View file @ 337df938
# For the TX, we need to set the tx gain values such that the transmitted power on all antennas is the same
# don't put any blank lines in this file
# tx gain (dB)
25 25 25 25
# total tx power (dBm)
5
targets/RTAI/USER/ue2rflo.lime deleted 100644 → 0
View file @ 337df938
8254871 8255752 8257340 8257340
targets/RTAI/USER/ue2rxg.lime deleted 100644 → 0
View file @ 337df938
# this file contains the calibration values to compute the RSSI
# we can use three different gain stages (high, low, med) as well as a gain factor for fine tuning
# the three lines in this file gives the total rx gain in dB for the three gain stages if the rx gain is set to 30dB
# high gain
108 108 108 108
# med gain
127 127 127 127
# low gain
120 120 120 120
targets/RTAI/USER/ue2txg.lime deleted 100644 → 0
View file @ 337df938
# For the TX, we need to set the tx gain values such that the transmitted power on all antennas is the same
# don't put any blank lines in this file
# tx gain (dB)
25 25 25 25
# total tx power (dBm)
4
targets/RTAI/USER/zeptorflo.lime deleted 100644 → 0
View file @ 337df938
8255000 8255000 8255000 8255000
targets/RTAI/USER/zeptorxg.lime deleted 100644 → 0
View file @ 337df938
133 133 133 133
127 127 127 127
120 120 120 120
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment