n310 config file

targets/PROJECTS/GENERIC-LTE-EPC/CONF/testing_gnb_nsa_n310.conf

+Active_gNBs = ( "gNB-Eurecom-5GNRBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "gNB-Eurecom-5GNRBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+
+    plmn_list = ({mcc = 222; mnc = 01; mnc_length = 2;});	 
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    ssb_SubcarrierOffset                                      = 31; //0;
+    pdsch_AntennaPorts                                        = 1;
+    pusch_AntennaPorts                                        = 1;
+    pusch_TargetSNRx10                                        = 200;
+    pucch_TargetSNRx10                                        = 200;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3600 MHz + 84 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                          = 641272; //641032;      #641968; 641968=start of ssb at 3600MHz + 82 RBs    641032=center of SSB at center of cell
+      dl_frequencyBand                                                 = 78;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                       = 640000;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=84,L=13 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                                        = 6368;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialDLBWPsubcarrierSpacing                                           = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                                      = 0;
+        initialDLBWPsearchSpaceZero                                             = 0;
+      #pdsch-ConfigCommon
+        #pdschTimeDomainAllocationList (up to 16 entries)
+        initialDLBWPk0_0                    = 0;  #for DL slot
+        initialDLBWPmappingType_0           = 0;  #0=typeA,1=typeB
+        initialDLBWPstartSymbolAndLength_0  = 40; #this is SS=1,L=13
+
+        initialDLBWPk0_1                    = 0;  #for mixed slot
+        initialDLBWPmappingType_1           = 0;
+        initialDLBWPstartSymbolAndLength_1  = 57; #this is SS=1,L=5
+
+  #uplinkConfigCommon 
+     #frequencyInfoUL
+      ul_frequencyBand                                                 = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      ul_subcarrierSpacing                                           = 1;
+      ul_carrierBandwidth                                            = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                                        = 6368;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialULBWPsubcarrierSpacing                                           = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -100;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 5;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14; //15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #  
+        msg1_SubcarrierSpacing                                      = 1,
+
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+      # pusch-ConfigCommon (up to 16 elements)
+        initialULBWPk2_0                      = 2;  # used for UL slot
+        initialULBWPmappingType_0             = 1
+        initialULBWPstartSymbolAndLength_0    = 41; # this is SS=0 L=13
+
+        initialULBWPk2_1                      = 2;  # used for mixed slot
+        initialULBWPmappingType_1             = 1;
+        initialULBWPstartSymbolAndLength_1    = 24; # this is SS=10 L=2
+
+        initialULBWPk2_2                      = 7;  # used for Msg.3 during RA
+        initialULBWPmappingType_2             = 1;
+        initialULBWPstartSymbolAndLength_2    = 52; # this is SS=10 L=4
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1; #0x80;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1 
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1 
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7; //8; //7;
+      nrofDownlinkSymbols                                           = 6; //0; //6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4; //0; //4;
+
+  ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    amf_ip_address      = ( { ipv4       = "192.168.18.99";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    ///X2
+    enable_x2 = "yes";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+    target_enb_x2_ip_address      = (
+                                     { ipv4       = "192.168.18.199";
+                                       ipv6       = "192:168:30::17";
+                                       preference = "ipv4";
+                                     }
+                                    );
+
+    NETWORK_INTERFACES :
+    {
+
+        GNB_INTERFACE_NAME_FOR_NG_AMF            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.18.198/24";
+        GNB_INTERFACE_NAME_FOR_NGU               = "eth0";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.18.198/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        GNB_IPV4_ADDRESS_FOR_X2C                 = "192.168.18.198/24";
+        GNB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+	{
+	num_cc = 1;
+	tr_s_preference = "local_L1";
+	tr_n_preference = "local_RRC";
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+	pusch_proc_threads = 8;
+        }  
+);
+
+RUs = (
+    {		  
+       local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [7];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 75;
+         eNB_instances  = [0];
+         sdr_addrs = "mgmt_addr=192.168.18.252,addr=192.168.80.50,clock_source=internal,time_source=    internal"
+         #clock_src = "external";
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    //parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0", "nea2" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia0" );
+};
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+    };
+