handling beamforming also for PDSCH

executables/nr-ru.c

@@ -759,7 +759,11 @@ void tx_rf(RU_t *ru,int frame,int slot, uint64_t timestamp) {
       // bit 11 enables the gpio programming
       // currently we switch beams every 10 slots (should = 1 TDD period in FR2) and we take the beam index of the first symbol of the first slot of this period
       int beam=0;
-      if (slot%10==0) beam = ru->common.beam_id[0][slot*fp->symbols_per_slot] & 8;
+      if (slot%10==0) {
+	if (ru->common.beam_id[0][slot*fp->symbols_per_slot] < 8) {
+	  beam = ru->common.beam_id[0][slot*fp->symbols_per_slot] & 8;
+	}
+      }
       /*
       if (slot==0 || slot==40) beam=0&8;
       if (slot==10 || slot==50) beam=1&8;

openair1/PHY/NR_TRANSPORT/nr_dlsch.c

@@ -333,7 +333,25 @@ uint8_t nr_generate_pdsch(PHY_VARS_gNB *gNB,
       } // symbol loop
     }// layer loop
     dlsch->slot_tx[slot]=0;
+
+    // TODO: handle precoding
+    // this maps the layers onto antenna ports
+    
+    // handle beamforming ID
+    // each antenna port is assigned a beam_index
+    // since PHY can only handle BF on slot basis we set the whole slot
+
+    // first check if this slot has not already been allocated to another beam
+    if (gNB->common_vars.beam_id[0][slot*frame_parms->symbols_per_slot]!=255) {
+      for (int j=0;j<frame_parms->symbols_per_slot;j++) 
+	gNB->common_vars.beam_id[0][slot*frame_parms->symbols_per_slot+j] = rel15->precodingAndBeamforming.prgs_list[0].dig_bf_interface_list[0].beam_idx;
+    }
+    else {
+      LOG_W(PHY,"beam index for PDSCH allocation already taken\n");
+    }
   }// dlsch loop
+
+  
   return 0;
 }
 

openair1/SCHED_NR/phy_procedures_nr_gNB.c

@@ -160,9 +160,10 @@ void phy_procedures_gNB_TX(PHY_VARS_gNB *gNB,
 
   if (do_meas==1) start_meas(&gNB->phy_proc_tx);
 
-  // clear the transmit data array for the current subframe
+  // clear the transmit data array and beam index for the current slot
   for (aa=0; aa<cfg->carrier_config.num_tx_ant.value; aa++) {
     memset(&gNB->common_vars.txdataF[aa][txdataF_offset],0,fp->samples_per_slot_wCP*sizeof(int32_t));
+    memset(&gNB->common_vars.beam_id[aa][slot*fp->symbols_per_slot],255,fp->symbols_per_slot*sizeof(uint8_t));
   }
 
   VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_gNB_COMMON_TX,1);