Commit 7b4a8630 authored by r.karey's avatar r.karey Committed by guhan

CSI-RS reporting bitlength calculation for type1 single panel two CSI-RS ports

parent 1e125874
......@@ -311,20 +311,36 @@ void config_common(int Mod_idP, int pdsch_AntennaPorts, NR_ServingCellConfigComm
}
//! Calculating number of bits set
uint8_t number_of_bits_set (uint8_t buf,uint8_t * max_ri){
uint8_t nb_of_bits_set = 0;
uint8_t mask = 0xff;
uint8_t index = 0;
for (index=7; (buf & mask) && (index>=0) ; index--){
if (buf & (1<<index))
nb_of_bits_set++;
mask>>=1;
}
*max_ri = 8-index;
return nb_of_bits_set;
}
//!TODO : smae function can be written to handle csi_resources
void update_csi_bitlen (NR_CSI_MeasConfig_t *csi_MeasConfig, NR_UE_list_t *UE_list, int UE_id) {
void update_csi_bitlen (NR_CSI_MeasConfig_t *csi_MeasConfig, NR_UE_list_t *UE_list, int UE_id, module_id_t Mod_idP) {
uint8_t csi_report_id = 0;
uint8_t csi_resourceidx =0;
uint8_t csi_ssb_idx =0;
uint16_t period, offset;
NR_CSI_ReportPeriodicityAndOffset_PR p_and_o;
NR_CSI_ReportConfig__reportQuantity_PR reportQuantity_type;
NR_CSI_ResourceConfigId_t csi_ResourceConfigId;
struct NR_CSI_ResourceConfig__csi_RS_ResourceSetList__nzp_CSI_RS_SSB * nzp_CSI_RS_SSB = NULL;
for (csi_report_id=0; csi_report_id < csi_MeasConfig->csi_ReportConfigToAddModList->list.count; csi_report_id++){
csi_ResourceConfigId=csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->resourcesForChannelMeasurement;
UE_list->csi_report_template[UE_id][csi_report_id].reportQuantity_type = csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->reportQuantity.present;
// UE_list->csi_report_template[UE_id][idx].
reportQuantity_type = csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->reportQuantity.present;
UE_list->csi_report_template[UE_id][csi_report_id].reportQuantity_type = reportQuantity_type;
p_and_o = csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->reportConfigType.choice.periodic->reportSlotConfig.present;
switch(p_and_o){
......@@ -378,24 +394,15 @@ void update_csi_bitlen (NR_CSI_MeasConfig_t *csi_MeasConfig, NR_UE_list_t *UE_li
if ( csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_ResourceConfigId != csi_ResourceConfigId)
continue;
else {
//Finding the CSI_RS or SSB Resources
UE_list->csi_report_template[UE_id][csi_report_id].CSI_Resource_type= csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_RS_ResourceSetList.present;
if (NR_CSI_ResourceConfig__csi_RS_ResourceSetList_PR_nzp_CSI_RS_SSB ==UE_list->csi_report_template[UE_id][csi_report_id].CSI_Resource_type){
nzp_CSI_RS_SSB = csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_RS_ResourceSetList.choice.nzp_CSI_RS_SSB;
UE_list->csi_report_template[UE_id][csi_report_id].nb_of_nzp_csi_report = nzp_CSI_RS_SSB->nzp_CSI_RS_ResourceSetList!=NULL ? nzp_CSI_RS_SSB->nzp_CSI_RS_ResourceSetList->list.count:0;
UE_list->csi_report_template[UE_id][csi_report_id].nb_of_csi_ssb_report = nzp_CSI_RS_SSB->csi_SSB_ResourceSetList!=NULL ? nzp_CSI_RS_SSB->csi_SSB_ResourceSetList->list.count:0;
}
if ( NR_CSI_ReportConfig__reportQuantity_PR_cri_RSRP == UE_list->csi_report_template[UE_id][csi_report_id].reportQuantity_type ||
NR_CSI_ReportConfig__reportQuantity_PR_ssb_Index_RSRP == UE_list->csi_report_template[UE_id][csi_report_id].reportQuantity_type) {
//if (0 != UE_list->csi_report_template[UE_id][csi_report_id].nb_of_csi_ssb_report)
uint8_t nb_ssb_resources =0;
//Finding the CSI_RS or SSB Resources
if ( NR_CSI_ReportConfig__reportQuantity_PR_cri_RSRP == reportQuantity_type ||
NR_CSI_ReportConfig__reportQuantity_PR_ssb_Index_RSRP == reportQuantity_type) {
if (NR_CSI_ReportConfig__groupBasedBeamReporting_PR_disabled ==
csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->groupBasedBeamReporting.present ) {
if (NULL != csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->groupBasedBeamReporting.choice.disabled->nrofReportedRS)
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].nb_ssbri_cri = *(csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->groupBasedBeamReporting.choice.disabled->nrofReportedRS)+1;
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen.nb_ssbri_cri = *(csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->groupBasedBeamReporting.choice.disabled->nrofReportedRS)+1;
else
/*! From Spec 38.331
* nrofReportedRS
......@@ -403,42 +410,243 @@ void update_csi_bitlen (NR_CSI_MeasConfig_t *csi_MeasConfig, NR_UE_list_t *UE_li
* capability. FFS: The signaling mechanism for the gNB to select a subset of N beams for the UE to measure and report.
* When the field is absent the UE applies the value 1
*/
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].nb_ssbri_cri= 1;
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen.nb_ssbri_cri= 1;
}else
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].nb_ssbri_cri= 2;
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen.nb_ssbri_cri= 2;
if (NR_CSI_ReportConfig__reportQuantity_PR_ssb_Index_RSRP == UE_list->csi_report_template[UE_id][csi_report_id].reportQuantity_type) {
for ( csi_ssb_idx = 0; csi_ssb_idx < csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.count; csi_ssb_idx++) {
if (csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.array[csi_ssb_idx]->csi_SSB_ResourceSetId ==
*(csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_RS_ResourceSetList.choice.nzp_CSI_RS_SSB->csi_SSB_ResourceSetList->list.array[0])) ///We can configure only one SSB resource set from spec 38.331 IE CSI-ResourceConfig
*(csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_RS_ResourceSetList.choice.nzp_CSI_RS_SSB->csi_SSB_ResourceSetList->list.array[0])){ ///We can configure only one SSB resource set from spec 38.331 IE CSI-ResourceConfig
nb_ssb_resources= csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.array[csi_ssb_idx]->csi_SSB_ResourceList.list.count;
UE_list->csi_report_template[UE_id][csi_report_id].SSB_Index_list = csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.array[csi_ssb_idx]->csi_SSB_ResourceList.list.array;
UE_list->csi_report_template[UE_id][csi_report_id].CSI_Index_list = NULL;
}
break ;
}
} else /*if (NR_CSI_ReportConfig__reportQuantity_PR_cri_RSRP == UE_list->csi_report_template[UE_id][csi_report_id].reportQuantity_type)*/{
for ( csi_ssb_idx = 0; csi_ssb_idx < csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.count; csi_ssb_idx++) {
if (csi_MeasConfig->nzp_CSI_RS_ResourceSetToAddModList->list.array[csi_ssb_idx]->nzp_CSI_ResourceSetId ==
*(csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_RS_ResourceSetList.choice.nzp_CSI_RS_SSB->nzp_CSI_RS_ResourceSetList->list.array[0])) ///For periodic and semi-persistent CSI Resource Settings, the number of CSI-RS Resource Sets configured is limited to S=1 for spec 38.212
*(csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_RS_ResourceSetList.choice.nzp_CSI_RS_SSB->nzp_CSI_RS_ResourceSetList->list.array[0])) { ///For periodic and semi-persistent CSI Resource Settings, the number of CSI-RS Resource Sets configured is limited to S=1 for spec 38.212
nb_ssb_resources= csi_MeasConfig->nzp_CSI_RS_ResourceSetToAddModList->list.array[csi_ssb_idx]->nzp_CSI_RS_Resources.list.count;
UE_list->csi_report_template[UE_id][csi_report_id].CSI_Index_list = csi_MeasConfig->nzp_CSI_RS_ResourceSetToAddModList->list.array[csi_ssb_idx]->nzp_CSI_RS_Resources.list.array;
UE_list->csi_report_template[UE_id][csi_report_id].SSB_Index_list = NULL;
}
break ;
}
}
if (nb_ssb_resources) {
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].cri_ssbri_bitlen =ceil(log2 (nb_ssb_resources));
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].rsrp_bitlen = 7; //From spec 38.212 Table 6.3.1.1.2-6: CRI, SSBRI, and RSRP
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].diff_rsrp_bitlen =4; //From spec 38.212 Table 6.3.1.1.2-6: CRI, SSBRI, and RSRP
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen.cri_ssbri_bitlen =ceil(log2 (nb_ssb_resources));
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen.rsrp_bitlen = 7; //From spec 38.212 Table 6.3.1.1.2-6: CRI, SSBRI, and RSRP
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen.diff_rsrp_bitlen =4; //From spec 38.212 Table 6.3.1.1.2-6: CRI, SSBRI, and RSRP
} else {
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].cri_ssbri_bitlen =0;
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].rsrp_bitlen = 0;
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].diff_rsrp_bitlen =0;
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen.cri_ssbri_bitlen =0;
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen.rsrp_bitlen = 0;
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen.diff_rsrp_bitlen =0;
}
LOG_I (MAC, "UCI: CSI_bit len : ssbri %d, rsrp: %d, diff_rsrp: %d",
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].cri_ssbri_bitlen,
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].rsrp_bitlen,
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].diff_rsrp_bitlen);
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen.cri_ssbri_bitlen,
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen.rsrp_bitlen,
UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen.diff_rsrp_bitlen);
}
uint8_t ri_restriction;
uint8_t ri_bitlen;
uint8_t nb_allowed_ri;
uint8_t max_ri;
if (NR_CSI_ReportConfig__reportQuantity_PR_cri_RI_PMI_CQI == reportQuantity_type ||
NR_CSI_ReportConfig__reportQuantity_PR_cri_RI_LI_PMI_CQI==reportQuantity_type ||
NR_CSI_ReportConfig__reportQuantity_PR_cri_RI_CQI==reportQuantity_type ||
NR_CSI_ReportConfig__reportQuantity_PR_cri_RI_i1_CQI==reportQuantity_type||
NR_CSI_ReportConfig__reportQuantity_PR_cri_RI_i1==reportQuantity_type){
for ( csi_ssb_idx = 0; csi_ssb_idx < csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.count; csi_ssb_idx++) {
if (csi_MeasConfig->nzp_CSI_RS_ResourceSetToAddModList->list.array[csi_ssb_idx]->nzp_CSI_ResourceSetId ==
*(csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_RS_ResourceSetList.choice.nzp_CSI_RS_SSB->nzp_CSI_RS_ResourceSetList->list.array[0])) { ///For periodic and semi-persistent CSI Resource Settings, the number of CSI-RS Resource Sets configured is limited to S=1 for spec 38.212
nb_ssb_resources= csi_MeasConfig->nzp_CSI_RS_ResourceSetToAddModList->list.array[csi_ssb_idx]->nzp_CSI_RS_Resources.list.count;
UE_list->csi_report_template[UE_id][csi_report_id].CSI_Index_list = csi_MeasConfig->nzp_CSI_RS_ResourceSetToAddModList->list.array[csi_ssb_idx]->nzp_CSI_RS_Resources.list.array;
UE_list->csi_report_template[UE_id][csi_report_id].SSB_Index_list = NULL;
}
break ;
}
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.cri_bitlen=ceil(log2 (nb_ssb_resources));
if (NR_CodebookConfig__codebookType__type1__subType_PR_typeI_SinglePanel==
csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->codebookConfig->codebookType.choice.type1->subType.present){
switch (RC.nrrrc[Mod_idP]->carrier.pdsch_AntennaPorts) {
case 1:;
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.ri_bitlen=0;
break;
case 2:
/* From Spec 38.212
* If the higher layer parameter nrofCQIsPerReport=1, nRI in Table 6.3.1.1.2-3 is the number of allowed rank indicator
* values in the 4 LSBs of the higher layer parameter typeI-SinglePanel-ri-Restriction according to Subclause 5.2.2.2.1 [6,
* TS 38.214]; otherwise nRI in Table 6.3.1.1.2-3 is the number of allowed rank indicator values according to Subclause
* 5.2.2.2.1 [6, TS 38.214].
*
* But from Current RRC ASN structures nrofCQIsPerReport is not present. Present a dummy variable is present so using it to
* calculate RI for antennas equal or more than two.
* */
AssertFatal (NULL!=csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->dummy, "nrofCQIsPerReport is not present");
ri_restriction = csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->codebookConfig->codebookType.choice.type1->subType.choice.typeI_SinglePanel->typeI_SinglePanel_ri_Restriction.buf[0];
if (0==*(csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->dummy)){ /* Replace dummy with the nrofCQIsPerReport from the CSIreport
config when equalent ASN structure present */
nb_allowed_ri = number_of_bits_set((ri_restriction & 0xf0), &max_ri);
ri_bitlen = ceil(log2(nb_allowed_ri));
}
else{
nb_allowed_ri = number_of_bits_set(ri_restriction, &max_ri);
ri_bitlen = ceil(log2(nb_allowed_ri));
}
ri_bitlen = ri_bitlen<1?ri_bitlen:1; //from the spec 38.212 and table 6.3.1.1.2-3: RI, LI, CQI, and CRI of codebookType=typeI-SinglePanel
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.ri_bitlen=ri_bitlen;
break;
case 4:
AssertFatal (NULL!=csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->dummy, "nrofCQIsPerReport is not present");
ri_restriction = csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->codebookConfig->codebookType.choice.type1->subType.choice.typeI_SinglePanel->typeI_SinglePanel_ri_Restriction.buf[0];
if (0==*(csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->dummy)){ /* Replace dummy with the nrofCQIsPerReport from the CSIreport
config when equalent ASN structure present */
nb_allowed_ri = number_of_bits_set((ri_restriction & 0xf0), &max_ri);
ri_bitlen = ceil(log2(nb_allowed_ri));
}
else{
nb_allowed_ri = number_of_bits_set(ri_restriction,&max_ri);
ri_bitlen = ceil(log2(nb_allowed_ri));
}
ri_bitlen = ri_bitlen<2?ri_bitlen:2; //from the spec 38.212 and table 6.3.1.1.2-3: RI, LI, CQI, and CRI of codebookType=typeI-SinglePanel
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.ri_bitlen=ri_bitlen;
break;
case 6:
case 8:
AssertFatal (NULL!=csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->dummy, "nrofCQIsPerReport is not present");
ri_restriction = csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->codebookConfig->codebookType.choice.type1->subType.choice.typeI_SinglePanel->typeI_SinglePanel_ri_Restriction.buf[0];
if (0==*(csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->dummy)){ /* Replace dummy with the nrofCQIsPerReport from the CSIreport
config when equalent ASN structure present */
nb_allowed_ri = number_of_bits_set((ri_restriction & 0xf0),&max_ri);
ri_bitlen = ceil(log2(nb_allowed_ri));
}
else{
nb_allowed_ri = number_of_bits_set(ri_restriction, &max_ri);
ri_bitlen = ceil(log2(nb_allowed_ri));
}
//ri_bitlen = ri_bitlen<1?ri_bitlen:1; //from the spec 38.212 and table 6.3.1.1.2-3: RI, LI, CQI, and CRI of codebookType=typeI-SinglePanel
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.ri_bitlen=ri_bitlen;
break;
default:
//UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.ri_bitlen=0;
AssertFatal(RC.nrrrc[Mod_idP]->carrier.pdsch_AntennaPorts>8,"Number of antennas %d are out of range", RC.nrrrc[Mod_idP]->carrier.pdsch_AntennaPorts);
break;
}
}
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.li_bitlen=0;
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.cqi_bitlen=0;
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.pmi_x1_bitlen=0;
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.pmi_x2_bitlen=0;
}
if( NR_CSI_ReportConfig__reportQuantity_PR_cri_RI_LI_PMI_CQI==reportQuantity_type ){
if (NR_CodebookConfig__codebookType__type1__subType_PR_typeI_SinglePanel==
csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->codebookConfig->codebookType.choice.type1->subType.present){
switch (RC.nrrrc[Mod_idP]->carrier.pdsch_AntennaPorts) {
case 1:;
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.li_bitlen=0;
break;
case 2:
case 4:
case 6:
case 8:
/* From Spec 38.212
* If the higher layer parameter nrofCQIsPerReport=1, nRI in Table 6.3.1.1.2-3 is the number of allowed rank indicator
* values in the 4 LSBs of the higher layer parameter typeI-SinglePanel-ri-Restriction according to Subclause 5.2.2.2.1 [6,
* TS 38.214]; otherwise nRI in Table 6.3.1.1.2-3 is the number of allowed rank indicator values according to Subclause
* 5.2.2.2.1 [6, TS 38.214].
*
* But from Current RRC ASN structures nrofCQIsPerReport is not present. Present a dummy variable is present so using it to
* calculate RI for antennas equal or more than two.
* */
//! TODO: The bit length of LI is as follows LI = log2(RI), Need to confirm wheather we should consider maximum RI can be reported from ri_restricted
// or we should consider reported RI. If we need to consider reported RI for calculating LI bit length then we need to modify the code.
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.li_bitlen=ceil(log2(max_ri))<2?ceil(log2(max_ri)):2;
break;
default:
AssertFatal(RC.nrrrc[Mod_idP]->carrier.pdsch_AntennaPorts>8,"Number of antennas %d are out of range", RC.nrrrc[Mod_idP]->carrier.pdsch_AntennaPorts);
break;
}
}
}
if (NR_CSI_ReportConfig__reportQuantity_PR_cri_RI_PMI_CQI == reportQuantity_type ||
NR_CSI_ReportConfig__reportQuantity_PR_cri_RI_LI_PMI_CQI==reportQuantity_type ||
NR_CSI_ReportConfig__reportQuantity_PR_cri_RI_CQI==reportQuantity_type ||
NR_CSI_ReportConfig__reportQuantity_PR_cri_RI_i1_CQI==reportQuantity_type){
switch (RC.nrrrc[Mod_idP]->carrier.pdsch_AntennaPorts){
case 1:;
case 2:
case 4:
case 6:
case 8:
/* From Spec 38.212
* If the higher layer parameter nrofCQIsPerReport=1, nRI in Table 6.3.1.1.2-3 is the number of allowed rank indicator
* values in the 4 LSBs of the higher layer parameter typeI-SinglePanel-ri-Restriction according to Subclause 5.2.2.2.1 [6,
* TS 38.214]; otherwise nRI in Table 6.3.1.1.2-3 is the number of allowed rank indicator values according to Subclause
* 5.2.2.2.1 [6, TS 38.214].
*
* But from Current RRC ASN structures nrofCQIsPerReport is not present. Present a dummy variable is present so using it to
* calculate RI for antennas equal or more than two.
* */
if (max_ri > 4 && max_ri < 8){
if (NR_CodebookConfig__codebookType__type1__subType_PR_typeI_SinglePanel==
csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->codebookConfig->codebookType.choice.type1->subType.present){
if (NR_CSI_ReportConfig__reportFreqConfiguration__cqi_FormatIndicator_widebandCQI==csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->reportFreqConfiguration->cqi_FormatIndicator)
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.cqi_bitlen = 8;
else
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.cqi_bitlen = 4;
}
}else{ //This condition will work even for type1-multipanel.
if (NR_CSI_ReportConfig__reportFreqConfiguration__cqi_FormatIndicator_widebandCQI==csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->reportFreqConfiguration->cqi_FormatIndicator)
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.cqi_bitlen = 4;
else
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.cqi_bitlen = 2;
}
break;
default:
AssertFatal(RC.nrrrc[Mod_idP]->carrier.pdsch_AntennaPorts>8,"Number of antennas %d are out of range", RC.nrrrc[Mod_idP]->carrier.pdsch_AntennaPorts);
break;
}
}
if (NR_CSI_ReportConfig__reportQuantity_PR_cri_RI_PMI_CQI == reportQuantity_type ||
NR_CSI_ReportConfig__reportQuantity_PR_cri_RI_LI_PMI_CQI==reportQuantity_type){
if (NR_CodebookConfig__codebookType__type1__subType_PR_typeI_SinglePanel==
csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->codebookConfig->codebookType.choice.type1->subType.present){
switch (csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->codebookConfig->codebookType.choice.type1->subType.choice.typeI_SinglePanel->nrOfAntennaPorts.present){
case NR_CodebookConfig__codebookType__type1__subType__typeI_SinglePanel__nrOfAntennaPorts_PR_two:
if (max_ri ==1)
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.pmi_x1_bitlen = 2;
else if (max_ri ==2)
UE_list->csi_report_template[UE_id][csi_report_id].csi_meas_bitlen.pmi_x1_bitlen = 1;
break;
default:
AssertFatal(csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->codebookConfig->codebookType.choice.type1->subType.choice.typeI_SinglePanel->nrOfAntennaPorts.present!=NR_CodebookConfig__codebookType__type1__subType__typeI_SinglePanel__nrOfAntennaPorts_PR_two,
"Not handled Yet %d", csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->codebookConfig->codebookType.choice.type1->subType.choice.typeI_SinglePanel->nrOfAntennaPorts.present);
break;
}
}
}
break;
}
......@@ -574,7 +782,7 @@ int rrc_mac_config_req_gNB(module_id_t Mod_idP,
UE_info->secondaryCellGroup[UE_id] = secondaryCellGroup;
LOG_I(PHY,"Modified UE_id %d/%x with secondaryCellGroup\n",UE_id,rnti);
}
update_csi_bitlen (secondaryCellGroup->spCellConfig->spCellConfigDedicated->csi_MeasConfig->choice.setup, UE_list, UE_id);
update_csi_bitlen (secondaryCellGroup->spCellConfig->spCellConfigDedicated->csi_MeasConfig->choice.setup, UE_list, UE_id, Mod_idP);
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_RRC_MAC_CONFIG, VCD_FUNCTION_OUT);
......
......@@ -393,7 +393,16 @@ typedef struct {
uint8_t cri_ssbri_bitlen;
uint8_t rsrp_bitlen;
uint8_t diff_rsrp_bitlen;
}CRI_SSBRI_RSRP_bitlen_t;
}L1_RSRP_bitlen_t;
typedef struct{
uint8_t cri_bitlen;
uint8_t ri_bitlen;
uint8_t li_bitlen;
uint8_t pmi_x1_bitlen;
uint8_t pmi_x2_bitlen;
uint8_t cqi_bitlen;
} CSI_Meas_bitlen_t;
#define MAX_CSI_RESOURCE_SET_IN_CSI_RESOURCE_CONFIG 16
......@@ -402,11 +411,13 @@ typedef struct nr_csi_report {
NR_CSI_ResourceConfig__csi_RS_ResourceSetList_PR CSI_Resource_type;
uint8_t nb_of_nzp_csi_report;
uint8_t nb_of_csi_ssb_report;
CRI_SSBRI_RSRP_bitlen_t CSI_report_bitlen[MAX_CSI_RESOURCE_SET_IN_CSI_RESOURCE_CONFIG];
L1_RSRP_bitlen_t CSI_report_bitlen;
CSI_Meas_bitlen_t csi_meas_bitlen;
} nr_csi_report_t;
/*! \brief scheduling control information set through an API */
#define MAX_CSI_REPORTS 48
typedef struct {
/// total amount of data awaiting for this UE
uint32_t num_total_bytes;
......
......@@ -75,33 +75,6 @@ void handle_nr_rach(NR_UL_IND_t *UL_info) {
}
}
}
#if 0
//!TODO : smae function can be written to handle csi_resources
uint8_t get_ssb_resources (NR_CSI_MeasConfig_t *csi_MeasConfig,
NR_CSI_ResourceConfigId_t csi_ResourceConfigId,
NR_CSI_ReportConfig__reportQuantity_PR reportQuantity_type,
uint8_t *nb_resource_sets) {
uint8_t idx = 0;
uint8_t csi_ssb_idx =0;
for ( idx = 0; idx < csi_MeasConfig->csi_ResourceConfigToAddModList->list.count; idx++) {
if ( csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[idx]->csi_ResourceConfigId == csi_ResourceConfigId) {
//Finding the CSI_RS or SSB Resources
if ( csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[idx]->csi_RS_ResourceSetList.present == NR_CSI_ResourceConfig__csi_RS_ResourceSetList_PR_nzp_CSI_RS_SSB) {
if (NR_CSI_ReportConfig__reportQuantity_PR_ssb_Index_RSRP == reportQuantity_type ){
*nb_resource_sets=csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[idx]->csi_RS_ResourceSetList.choice.nzp_CSI_RS_SSB->csi_SSB_ResourceSetList->list.count;
for ( csi_ssb_idx = 0; csi_ssb_idx < csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.count; csi_ssb_idx++) {
if (csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.array[csi_ssb_idx]->csi_SSB_ResourceSetId ==
*(csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[idx]->csi_RS_ResourceSetList.choice.nzp_CSI_RS_SSB->csi_SSB_ResourceSetList->list.array[0])) {
return csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.array[csi_ssb_idx]->csi_SSB_ResourceList.list.count;
} else {
//handle error condition
AssertFatal(csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.array[csi_ssb_idx]->csi_SSB_ResourceSetId, "csi_SSB_ResourcesSetId is not configured");
}
}
}
else if (NR_CSI_ReportConfig__reportQuantity_PR_cri_RSRP == reportQuantity_type)
*nb_resource_sets=csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[idx]->csi_RS_ResourceSetList.choice.nzp_CSI_RS_SSB->nzp_CSI_RS_ResourceSetList->list.count;
......@@ -156,15 +129,14 @@ void extract_pucch_csi_report ( NR_CSI_MeasConfig_t *csi_MeasConfig,
module_id_t Mod_idP
) {
/** From Table 6.3.1.1.2-3: RI, LI, CQI, and CRI of codebookType=typeI-SinglePanel */
//uint8_t bitlen_cri = (log(csi_MeasConfig->csi_ResourceConfigToAddModList->list.count)/log(2));
uint8_t idx = 0;
uint8_t payload_size = ceil(uci_pdu->csi_part1.csi_part1_bit_len/8);
uint16_t *payload = calloc (1, payload_size);
NR_CSI_ReportConfig__reportQuantity_PR reportQuantity_type = NR_CSI_ReportConfig__reportQuantity_PR_NOTHING;
//uint8_t UE_id = 0;
NR_UE_list_t *UE_list = &(RC.nrmac[Mod_idP]->UE_list);
long periodicity;
uint8_t csi_report_id = 0;
memcpy ( payload, uci_pdu->csi_part1.csi_part1_payload, payload_size);
for ( csi_report_id =0; csi_report_id < csi_MeasConfig->csi_ReportConfigToAddModList->list.count; csi_report_id++ ) {
......@@ -176,35 +148,24 @@ void extract_pucch_csi_report ( NR_CSI_MeasConfig_t *csi_MeasConfig,
LOG_I(PHY,"SFN/SF:%d%d \n", frame,slot);
/* if (((NR_SubcarrierSpacing_kHz30 == scs) && (((((frame & 0xf)+1)*20 + slot) & periodicity) == periodicity))
||((NR_SubcarrierSpacing_kHz120 == scs)&&(((((frame & 0xf)+1)*80 + slot) & periodicity) == periodicity))) {*/
if (((slots_per_frame[scs]*frame + slot -UE_list->csi_report_template[UE_id][csi_report_id].offset)%periodicity)==0) {
if (((slots_per_frame[scs]*frame + slot -UE_list->csi_report_template[UE_id][csi_report_id].offset)%periodicity)!=0)
continue;
reportQuantity_type = UE_list->csi_report_template[UE_id][csi_report_id].reportQuantity_type;
LOG_I(PHY,"SFN/SF:%d%d reportQuantity type = %d\n",frame,slot,reportQuantity_type);
break;
}
}
if ( !(reportQuantity_type))
AssertFatal(reportQuantity_type, "reportQuantity is not configured");
if ( NR_CSI_ReportConfig__reportQuantity_PR_ssb_Index_RSRP == reportQuantity_type ) {
uint8_t nb_ssb_resource_set= UE_list->csi_report_template[UE_id][csi_report_id].nb_of_csi_ssb_report;
//uint8_t nb_ssb_resources = UE_list->csi_report_template[UE_id][csi_report_id].
/* get_ssb_resources(csi_MeasConfig,
csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->resourcesForChannelMeasurement,
reportQuantity_type,&nb_ssb_resource_set);//csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.array[0]->CSI_SSB_ResourceList.list.count;*/
uint8_t ssb_idx = 0;
if ( NR_CSI_ReportConfig__reportQuantity_PR_ssb_Index_RSRP == reportQuantity_type ||
NR_CSI_ReportConfig__reportQuantity_PR_cri_RSRP == reportQuantity_type) {
uint8_t csi_ssb_idx = 0;
uint8_t diff_rsrp_idx = 0;
uint8_t bitlen_ssbri = UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].cri_ssbri_bitlen;
//sched_ctrl->nr_of_csi_report[UE_id] = nb_ssb_resource_set;
uint8_t cri_ssbri_bitlen = UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen.cri_ssbri_bitlen;
LOG_I(MAC,"csi_payload = %d, bitlen_ssbri = %d, nb_ssb_resource_set = %d\n",payload_size, bitlen_ssbri, nb_ssb_resource_set);
LOG_I(MAC,"csi_payload = %d, cri_ssbri_bitlen = %d\n",payload_size, cri_ssbri_bitlen);
/*! As per the spec 38.212 and table: 6.3.1.1.2-12 in a single UCI sequence we can have multiple CSI_report
* the number of CSI_report will depend on number of CSI resource sets that are configured in CSI-ResourceConfig RRC IE
* From spec 38.331 from the IE CSI-ResourceConfig for SSB RSRP reporting we can configure only one resource set
* From spec 38.214 section 5.2.1.2 For periodic and semi-persistent CSI Resource Settings, the number of CSI-RS Resource Sets configured is limited to S=1
*/
// for (idx = 0; idx < nb_ssb_resource_set; idx++) {
/** from 38.214 sec 5.2.1.4.2
- if the UE is configured with the higher layer parameter groupBasedBeamReporting set to 'disabled', the UE is
......@@ -218,21 +179,17 @@ void extract_pucch_csi_report ( NR_CSI_MeasConfig_t *csi_MeasConfig,
multiple simultaneous spatial domain receive filter
*/
/* if (NR_CSI_ReportConfig__groupBasedBeamReporting_PR_disabled ==
csi_MeasConfig->csi_ReportConfigToAddModList->list.array[0]->groupBasedBeamReporting.present ) {
idx = 0; //Since for SSB RSRP reporting in RRC can configure only one ssb resource set per one report config
sched_ctrl->CSI_report[idx].choice.ssb_cri_report.nr_ssbri_cri = UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen.nb_ssbri_cri;
if ((NULL != csi_MeasConfig->csi_ReportConfigToAddModList->list.array[0]->groupBasedBeamReporting.choice.disabled->nrofReportedRS) &&
*(csi_MeasConfig->csi_ReportConfigToAddModList->list.array[0]->groupBasedBeamReporting.choice.disabled->nrofReportedRS))
sched_ctrl->CSI_report[UE_id][idx].choice.ssb_cri_report.nr_ssbri_cri = *(csi_MeasConfig->csi_ReportConfigToAddModList->list.array[0]->groupBasedBeamReporting.choice.disabled->nrofReportedRS);
for (csi_ssb_idx = 0; csi_ssb_idx < sched_ctrl->CSI_report[idx].choice.ssb_cri_report.nr_ssbri_cri ; csi_ssb_idx++) {
if (NR_CSI_ReportConfig__reportQuantity_PR_ssb_Index_RSRP == reportQuantity_type)
else */
idx = 0; //Since for SSB RSRP reporting in RRC can configure only one ssb resource set per one report config
sched_ctrl->CSI_report[idx].choice.ssb_cri_report.nr_ssbri_cri = UE_list->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].nb_ssbri_cri;
sched_ctrl->CSI_report[idx].choice.ssb_cri_report.CRI_SSBRI [csi_ssb_idx] = *(UE_list->csi_report_template[UE_id][csi_report_id].SSB_Index_list [(*payload) & ~(~1<<(cri_ssbri_bitlen-1))]);
else
sched_ctrl->CSI_report[idx].choice.ssb_cri_report.CRI_SSBRI [csi_ssb_idx] = *(UE_list->csi_report_template[UE_id][csi_report_id].CSI_Index_list [(*payload) & ~(~1<<(cri_ssbri_bitlen-1))]);
for (ssb_idx = 0; ssb_idx < sched_ctrl->CSI_report[idx].choice.ssb_cri_report.nr_ssbri_cri ; ssb_idx++) {
/** From Table 6.3.1.1.2-3: RI, LI, CQI, and CRI of codebookType=typeI-SinglePanel */
sched_ctrl->CSI_report[idx].choice.ssb_cri_report.CRI_SSBRI [ssb_idx] = (*payload) & ~(~1<<(bitlen_ssbri-1));
*payload >>= bitlen_ssbri;
*payload >>= cri_ssbri_bitlen;
}
sched_ctrl->CSI_report[idx].choice.ssb_cri_report.RSRP = (*payload) & 0x7f;
......@@ -242,26 +199,14 @@ void extract_pucch_csi_report ( NR_CSI_MeasConfig_t *csi_MeasConfig,
sched_ctrl->CSI_report[idx].choice.ssb_cri_report.diff_RSRP[diff_rsrp_idx] = (*payload) & 0x0f;
*payload >>= 4;
}
#if 0
} else if (NR_CSI_ReportConfig__groupBasedBeamReporting_PR_disabled !=
csi_MeasConfig->csi_ReportConfigToAddModList->list.array[0]->groupBasedBeamReporting.present ) {
sched_ctrl->CSI_report[UE_id][idx].choice.ssb_cri_report.nr_ssbri_cri = 2;
for (ssb_idx = 0; ssb_idx < 2; ssb_idx++) {
/** From Table 6.3.1.1.2-3: RI, LI, CQI, and CRI of codebookType=typeI-SinglePanel */
sched_ctrl->CSI_report[UE_id][idx].choice.ssb_cri_report.CRI_SSBRI[ssb_idx] = (*payload) & ~(~1<<(bitlen_ssbri-1));
*payload >>= bitlen_ssbri;
}
sched_ctrl->CSI_report[UE_id][idx].choice.ssb_cri_report.RSRP = (*payload) & 0x7f;
*payload >>= 7;
/** From Table 6.3.1.1.2-3: RI, LI, CQI, and CRI of codebookType=typeI-SinglePanel */
sched_ctrl->CSI_report[UE_id][idx].choice.ssb_cri_report.diff_RSRP[0] = (*payload) & 0x0f;
*payload >>= 4;
UE_list->csi_report_template[UE_id][csi_report_id].nb_of_csi_ssb_report++;
}
#endif
// }
}
if ( !(reportQuantity_type))
AssertFatal(reportQuantity_type, "reportQuantity is not configured");
#if 0
if ( NR_CSI_ReportConfig__reportQuantity_PR_cri_RI_PMI_CQI == reportQuantity_type ||
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment