Skip to content

O
OpenXG-RAN
Commit 7ceebea9 authored by chenhsunyang0922's avatar chenhsunyang0922
Browse files
Options

move NBIoT files to NBIoT_TRANSPORT from LTE_TRANSPORT

parent 3310f4f8
Show whitespace changes
Inline Side-by-side
Showing with 186 additions and 337 deletions
openair1/PHY/INIT/lte_init.c
View file @ 7ceebea9
......@@ -34,7 +34,8 @@
#include "common/utils/LOG/vcd_signal_dumper.h"
#include "assertions.h"
#include <math.h>
//NB-IoT
#include "openair2/ENB_APP/NB_IoT_config.c"
extern uint32_t from_earfcn(int eutra_bandP,uint32_t dl_earfcn);
extern int32_t get_uldl_offset(int eutra_bandP);
......@@ -96,7 +97,7 @@ l1_north_init_NB_IoT()
LOG_I(PHY,"RC.L1_NB_IoT = %p\n",RC.L1_NB_IoT);
for (j=0; j<NbIoT_L1_ParamList.numelt; j++) {
AssertFatal(RC.L1_NB_IoT[j]!=NULL,"RC.eNB_NB_IoT[%d] is null\n",i);
AssertFatal(RC.L1_NB_IoT[j]!=NULL,"RC.eNB_NB_IoT[%d] is null\n",j);
LOG_I(PHY,"RC.L1_NB_IoT = %p\n",RC.L1_NB_IoT);
......
openair1/PHY/INIT/lte_init_NB_IoT.c
View file @ 7ceebea9
......@@ -428,41 +428,43 @@ void phy_config_dedicated_eNB_NB_IoT(uint8_t Mod_id,
}
// void phy_init_lte_top_NB_IoT(NB_IoT_DL_FRAME_PARMS *frame_parms)
// {
void phy_init_lte_top_NB_IoT(NB_IoT_DL_FRAME_PARMS *frame_parms)
{
// // crcTableInit();
crcTableInit_NB_IoT();
// // ccodedot11_init();
// // ccodedot11_init_inv();
//ccodedot11_init();
//ccodedot11_init_inv();
ccodelte_init_NB_IoT();
ccodelte_init2_NB_IoT();
//ccodelte_init_inv();
// // ccodelte_init();
// // ccodelte_init_inv();
//treillis_table_init();
// // treillis_table_init();
//phy_generate_viterbi_tables();
//phy_generate_viterbi_tables_lte();
// // phy_generate_viterbi_tables();
// // phy_generate_viterbi_tables_lte();
//init_td8();
// init_td16();
#ifdef __AVX2__
// init_td16avx2();
#endif
// // init_td8();
// // init_td16();
// // #ifdef __AVX2__
// // init_td16avx2();
// // #endif
//lte_sync_time_init_NB_IoT(frame_parms);
// // lte_sync_time_init(frame_parms);
//generate_ul_ref_sigs();
//generate_ul_ref_sigs_rx();
generate_ul_ref_sigs_rx_NB_IoT();
// // generate_ul_ref_sigs();
// generate_ul_ref_sigs_rx_NB_IoT();
// generate_64qam_table();
//generate_16qam_table();
// generate_RIV_tables();
// // generate_64qam_table();
// // generate_16qam_table();
// // generate_RIV_tables();
init_unscrambling_lut_NB_IoT();
// init_scrambling_lut();
// // init_unscrambling_lut();
// // init_scrambling_lut();
// // //set_taus_seed(1328);
//set_taus_seed(1328);
// }
}
openair1/PHY/INIT/phy_init.h
View file @ 7ceebea9
......@@ -24,8 +24,8 @@
#include "PHY/defs_eNB.h"
#include "PHY/defs_UE.h"
#include "PHY/defs_NB_IoT.h"
#include "PHY/impl_defs_lte_NB_IoT.h"
#include "LTE_SystemInformationBlockType2.h"
//#include "RadioResourceConfigCommonSIB.h"
#include "LTE_RadioResourceConfigDedicated.h"
......
openair1/PHY/LTE_TRANSPORT/dlsch_coding.c
View file @ 7ceebea9
......@@ -484,15 +484,15 @@ void *te_thread(void *param) {
return(NULL);
}
/*if(opp_enabled == 1 && te_wakeup_stats0->p_time>50*3000){
if(opp_enabled == 1 && te_wakeup_stats0->p_time>50*3000){
print_meas_now(te_wakeup_stats0,"coding_wakeup",stderr);
printf("te_thread0 delay for waking up in frame_rx: %d subframe_rx: %d \n",proc->frame_rx,proc->subframe_rx);
}*/
}
}
return(NULL);
}
*/
int dlsch_encoding_2threads(PHY_VARS_eNB *eNB,
......
openair1/PHY/LTE_TRANSPORT/pbch.c
View file @ 7ceebea9
......@@ -47,9 +47,6 @@
//#define DEBUG_PBCH_ENCODING
//#define INTERFERENCE_MITIGATION 1
#include "PHY/LTE_REFSIG/defs.h"
#define PBCH_A 24
int allocate_pbch_REs_in_RB(LTE_DL_FRAME_PARMS *frame_parms,
......
openair1/PHY/LTE_UE_TRANSPORT/transport_proto_ue.h
View file @ 7ceebea9
......@@ -35,6 +35,7 @@
#include "PHY/LTE_TRANSPORT/transport_common_proto.h"
#include <math.h>
#include "nfapi_interface.h"
#include "PHY/defs_NB_IoT.h"
// Functions below implement 36-211 and 36-212
......@@ -43,25 +44,6 @@
*/
/** \fn free_eNB_dlsch(LTE_eNB_DLSCH_t *dlsch,unsigned char N_RB_DL)
\brief This function frees memory allocated for a particular DLSCH at eNB
@param dlsch Pointer to DLSCH to be removed
*/
void free_eNB_dlsch(LTE_eNB_DLSCH_t *dlsch);
void clean_eNb_dlsch(LTE_eNB_DLSCH_t *dlsch);
/** \fn new_eNB_dlsch(uint8_t Kmimo,uint8_t Mdlharq,uint32_t Nsoft,uint8_t abstraction_flag, LTE_DL_FRAME_PARMS* frame_parms)
\brief This function allocates structures for a particular DLSCH at eNB
@returns Pointer to DLSCH to be removed
@param Kmimo Kmimo factor from 36-212/36-213
@param Mdlharq Maximum number of HARQ rounds (36-212/36-213)
@param Nsoft Soft-LLR buffer size from UE-Category
@params N_RB_DL total number of resource blocks (determine the operating BW)
@param abstraction_flag Flag to indicate abstracted interface
@param frame_parms Pointer to frame descriptor structure
*/
LTE_eNB_DLSCH_t *new_eNB_dlsch(uint8_t Kmimo,uint8_t Mdlharq,uint32_t Nsoft,uint8_t N_RB_DL, uint8_t abstraction_flag, LTE_DL_FRAME_PARMS* frame_parms);
......@@ -90,40 +72,7 @@ void free_ue_ulsch(LTE_UE_ULSCH_t *ulsch);
LTE_UE_ULSCH_t *new_ue_ulsch(unsigned char N_RB_UL, uint8_t abstraction_flag);
/** \fn dlsch_encoding(PHY_VARS_eNB *eNB,
uint8_t *input_buffer,
LTE_DL_FRAME_PARMS *frame_parms,
uint8_t num_pdcch_symbols,
LTE_eNB_DLSCH_t *dlsch,
int frame,
uint8_t subframe)
\brief This function performs a subset of the bit-coding functions for LTE as described in 36-212, Release 8.Support is limited to turbo-coded channels (DLSCH/ULSCH). The implemented functions are:
- CRC computation and addition
- Code block segmentation and sub-block CRC addition
- Channel coding (Turbo coding)
- Rate matching (sub-block interleaving, bit collection, selection and transmission
- Code block concatenation
@param eNB Pointer to eNB PHY context
@param input_buffer Pointer to input buffer for sub-frame
@param frame_parms Pointer to frame descriptor structure
@param num_pdcch_symbols Number of PDCCH symbols in this subframe
@param dlsch Pointer to dlsch to be encoded
@param frame Frame number
@param subframe Subframe number
@param rm_stats Time statistics for rate-matching
@param te_stats Time statistics for turbo-encoding
@param i_stats Time statistics for interleaving
@returns status
*/
int32_t dlsch_encoding(PHY_VARS_eNB *eNB,
uint8_t *a,
uint8_t num_pdcch_symbols,
LTE_eNB_DLSCH_t *dlsch,
int frame,
uint8_t subframe,
time_stats_t *rm_stats,
time_stats_t *te_stats,
time_stats_t *i_stats);
int32_t dlsch_encoding_SIC(PHY_VARS_UE *ue,
uint8_t *a,
......@@ -137,194 +86,11 @@ int32_t dlsch_encoding_SIC(PHY_VARS_UE *ue,
/** \fn dlsch_encoding_2threads(PHY_VARS_eNB *eNB,
uint8_t *input_buffer,
uint8_t num_pdcch_symbols,
LTE_eNB_DLSCH_t *dlsch,
int frame,
uint8_t subframe)
\brief This function performs a subset of the bit-coding functions for LTE as described in 36-212, Release 8.Support is limited to turbo-coded channels (DLSCH/ULSCH). This version spawns 1 worker thread. The implemented functions are:
- CRC computation and addition
- Code block segmentation and sub-block CRC addition
- Channel coding (Turbo coding)
- Rate matching (sub-block interleaving, bit collection, selection and transmission
- Code block concatenation
@param eNB Pointer to eNB PHY context
@param input_buffer Pointer to input buffer for sub-frame
@param num_pdcch_symbols Number of PDCCH symbols in this subframe
@param dlsch Pointer to dlsch to be encoded
@param frame Frame number
@param subframe Subframe number
@param rm_stats Time statistics for rate-matching
@param te_stats Time statistics for turbo-encoding
@param i_stats Time statistics for interleaving
@returns status
*/
int32_t dlsch_encoding_2threads(PHY_VARS_eNB *eNB,
uint8_t *a,
uint8_t num_pdcch_symbols,
LTE_eNB_DLSCH_t *dlsch,
int frame,
uint8_t subframe,
time_stats_t *rm_stats,
time_stats_t *te_stats,
time_stats_t *i_stats);
void dlsch_encoding_emul(PHY_VARS_eNB *phy_vars_eNB,
uint8_t *DLSCH_pdu,
LTE_eNB_DLSCH_t *dlsch);
// Functions below implement 36-211
/** \fn allocate_REs_in_RB(int32_t **txdataF,
uint32_t *jj,
uint32_t *jj2,
uint16_t re_offset,
uint32_t symbol_offset,
LTE_DL_eNB_HARQ_t *dlsch0_harq,
LTE_DL_eNB_HARQ_t *dlsch1_harq,
uint8_t pilots,
int16_t amp,
int16_t *qam_table_s,
uint32_t *re_allocated,
uint8_t skip_dc,
uint8_t skip_half,
uint8_t use2ndpilots,
LTE_DL_FRAME_PARMS *frame_parms);
\brief Fills RB with data
\param txdataF pointer to output data (frequency domain signal)
\param jj index to output (from CW 1)
\param jj2 index to output (from CW 2)
\param re_offset index of the first RE of the RB
\param symbol_offset index to the OFDM symbol
\param dlsch0_harq Pointer to Transport block 0 HARQ structure
\param dlsch0_harq Pointer to Transport block 1 HARQ structure
\param pilots =1 if symbol_offset is an OFDM symbol that contains pilots, 0 otherwise
\param amp Amplitude for symbols
\param qam_table_s0 pointer to scaled QAM table for Transport Block 0 (by rho_a or rho_b)
\param qam_table_s1 pointer to scaled QAM table for Transport Block 1 (by rho_a or rho_b)
\param re_allocated pointer to allocation counter
\param skip_dc offset for positive RBs
\param skip_half indicate that first or second half of RB must be skipped for PBCH/PSS/SSS
\param ue_spec_rs UE specific RS indicator
\param nb_antennas_tx_phy Physical antenna elements which can be different with antenna port number, especially in beamforming case
\param use2ndpilots Set to use the pilots from antenna port 1 for PDSCH
\param frame_parms Frame parameter descriptor
*/
// Functions below implement 36-211
/** \fn allocate_REs_in_RB(int32_t **txdataF,
uint32_t *jj,
uint32_t *jj2,
uint16_t re_offset,
uint32_t symbol_offset,
LTE_DL_eNB_HARQ_t *dlsch0_harq,
LTE_DL_eNB_HARQ_t *dlsch1_harq,
uint8_t pilots,
int16_t amp,
int16_t *qam_table_s,
uint32_t *re_allocated,
uint8_t skip_dc,
uint8_t skip_half,
uint8_t use2ndpilots,
LTE_DL_FRAME_PARMS *frame_parms);
\brief Fills RB with data
\param txdataF pointer to output data (frequency domain signal)
\param jj index to output (from CW 1)
\param jj index to output (from CW 2)
\param re_offset index of the first RE of the RB
\param symbol_offset index to the OFDM symbol
\param dlsch0_harq Pointer to Transport block 0 HARQ structure
\param dlsch0_harq Pointer to Transport block 1 HARQ structure
\param pilots =1 if symbol_offset is an OFDM symbol that contains pilots, 0 otherwise
\param amp Amplitude for symbols
\param qam_table_s0 pointer to scaled QAM table for Transport Block 0 (by rho_a or rho_b)
\param qam_table_s1 pointer to scaled QAM table for Transport Block 1 (by rho_a or rho_b)
\param re_allocated pointer to allocation counter
\param skip_dc offset for positive RBs
\param skip_half indicate that first or second half of RB must be skipped for PBCH/PSS/SSS
\param use2ndpilots Set to use the pilots from antenna port 1 for PDSCH
\param frame_parms Frame parameter descriptor
*/
int32_t allocate_REs_in_RB(PHY_VARS_eNB* phy_vars_eNB,
int32_t **txdataF,
uint32_t *jj,
uint32_t *jj2,
uint16_t re_offset,
uint32_t symbol_offset,
LTE_DL_eNB_HARQ_t *dlsch0_harq,
LTE_DL_eNB_HARQ_t *dlsch1_harq,
uint8_t pilots,
int16_t amp,
uint8_t precoder_index,
int16_t *qam_table_s0,
int16_t *qam_table_s1,
uint32_t *re_allocated,
uint8_t skip_dc,
uint8_t skip_half,
uint8_t lprime,
uint8_t mprime,
uint8_t Ns,
int *P1_SHIFT,
int *P2_SHIFT);
/** \fn int32_t dlsch_modulation(int32_t **txdataF,
int16_t amp,
uint32_t sub_frame_offset,
LTE_DL_FRAME_PARMS *frame_parms,
uint8_t num_pdcch_symbols,
LTE_eNB_DLSCH_t *dlsch);
\brief This function is the top-level routine for generation of the sub-frame signal (frequency-domain) for DLSCH.
@param txdataF Table of pointers for frequency-domain TX signals
@param amp Amplitude of signal
@param sub_frame_offset Offset of this subframe in units of subframes (usually 0)
@param frame_parms Pointer to frame descriptor
@param num_pdcch_symbols Number of PDCCH symbols in this subframe
@param dlsch0 Pointer to Transport Block 0 DLSCH descriptor for this allocation
@param dlsch1 Pointer to Transport Block 0 DLSCH descriptor for this allocation
*/
int32_t dlsch_modulation(PHY_VARS_eNB* phy_vars_eNB,
int32_t **txdataF,
int16_t amp,
uint32_t sub_frame_offset,
uint8_t num_pdcch_symbols,
LTE_eNB_DLSCH_t *dlsch0,
LTE_eNB_DLSCH_t *dlsch1);
int32_t dlsch_modulation_SIC(int32_t **sic_buffer,
uint32_t sub_frame_offset,
LTE_DL_FRAME_PARMS *frame_parms,
uint8_t num_pdcch_symbols,
LTE_eNB_DLSCH_t *dlsch0,
int G);
/*
\brief This function is the top-level routine for generation of the sub-frame signal (frequency-domain) for MCH.
@param txdataF Table of pointers for frequency-domain TX signals
@param amp Amplitude of signal
@param subframe_offset Offset of this subframe in units of subframes (usually 0)
@param frame_parms Pointer to frame descriptor
@param dlsch Pointer to DLSCH descriptor for this allocation
*/
int mch_modulation(int32_t **txdataF,
int16_t amp,
uint32_t subframe_offset,
LTE_DL_FRAME_PARMS *frame_parms,
LTE_eNB_DLSCH_t *dlsch);
/** \brief Top-level generation function for eNB TX of MBSFN
@param phy_vars_eNB Pointer to eNB variables
@param a Pointer to transport block
@param abstraction_flag
*/
void generate_mch(PHY_VARS_eNB *phy_vars_eNB,eNB_rxtx_proc_t *proc,uint8_t *a);
/** \brief This function generates the frequency-domain pilots (cell-specific downlink reference signals)
@param phy_vars_eNB Pointer to eNB variables
@param proc Pointer to RXn-TXnp4 proc information
......@@ -400,7 +166,7 @@ int32_t generate_pilots_slot(PHY_VARS_eNB *phy_vars_eNB,
int first_pilot_only);
int32_t generate_mbsfn_pilot(PHY_VARS_eNB *phy_vars_eNB,
eNB_rxtx_proc_t *proc,
eNB_rxtx_proc_NB_IoT_t *proc,
int32_t **txdataF,
int16_t amp);
......
openair1/PHY/LTE_TRANSPORT/defs_NB_IoT.h → openair1/PHY/NBIoT_TRANSPORT/defs_NB_IoT.h
View file @ 7ceebea9
......@@ -15,11 +15,11 @@
#define __LTE_TRANSPORT_DEFS_NB_IOT__H__
////#include "PHY/defs.h"
//#include "PHY/defs_nb_iot.h"
#include "PHY/LTE_TRANSPORT/dci_NB_IoT.h"
#include "PHY/NBIoT_TRANSPORT/dci_NB_IoT.h"
#include "PHY/impl_defs_lte_NB_IoT.h"
#include "openair2/COMMON/platform_types.h"
//#include "dci.h"
#include "PHY/LTE_TRANSPORT/uci_NB_IoT.h"
#include "PHY/NBIoT_TRANSPORT/uci_NB_IoT.h"
//#include "dci.h"
//#include "uci.h"
//#ifndef STANDALONE_COMPILE
......
openair1/PHY/NBIoT_TRANSPORT/dlsch_coding_NB_IoT.c
View file @ 7ceebea9
......@@ -32,13 +32,14 @@
#include <string.h>
//#include "PHY/impl_defs_lte.h"
//#include "openair2/COMMON/openair_defs.h"
#include "PHY/defs.h"
#include "PHY/defs_eNB.h"
#include "PHY/defs_UE.h"
//#include "PHY/extern_NB_IoT.h"
#include "PHY/CODING/defs_NB_IoT.h"
//#include "PHY/CODING/extern.h"
//#include "PHY/CODING/lte_interleaver_inline.h"
#include "PHY/LTE_TRANSPORT/defs_NB_IoT.h"
#include "PHY/LTE_TRANSPORT/proto.h"
#include "PHY/NBIoT_TRANSPORT/defs_NB_IoT.h"
#include "PHY/LTE_TRANSPORT/transport_proto.h"
//#include "SCHED/defs_NB_IoT.h"
//#include "defs_nb_iot.h"
//#include "UTIL/LOG/vcd_signal_dumper.h"
......
openair1/PHY/NBIoT_TRANSPORT/npss_NB_IoT.c
View file @ 7ceebea9
......@@ -28,9 +28,10 @@
* \warning
*/
#include "PHY/defs.h"
#include "PHY/defs_eNB.h"
#include "PHY/defs_UE.h"
///////////////#include "PHY/defs_nb_iot.h"
#include "PHY/extern.h"
#include "PHY/phy_extern.h"
#include <math.h>
//#include "PHY/impl_defs_lte_NB_IoT.h"
//#include "PHY/impl_defs_top_NB_IoT.h"
......
openair1/PHY/NBIoT_TRANSPORT/nsss_NB_IoT.c
View file @ 7ceebea9
......@@ -30,11 +30,12 @@
*/
//#include <math.h>
#include "PHY/defs.h"
#include "PHY/defs_eNB.h"
#include "PHY/defs_UE.h"
//#include "PHY/defs_NB_IoT.h" // not can be replaced by impl_defs_lte_NB_IoT & impl_defs_top_NB_IoT if "msg" function is not used
//#include "defs.h"
//#include "PHY/extern_NB_IoT.h"
#include "PHY/extern.h"
#include "PHY/phy_extern.h"
//#include "PHY/impl_defs_lte_NB_IoT.h"
//#include "PHY/impl_defs_top_NB_IoT.h"
#include "nsss_NB_IoT.h"
......
openair1/PHY/NBIoT_TRANSPORT/pilots_NB_IoT.c
View file @ 7ceebea9
......@@ -12,7 +12,8 @@
* \warning
*/
#include "PHY/defs.h"
#include "PHY/defs_eNB.h"
#include "PHY/defs_UE.h"
#include "PHY/defs_NB_IoT.h"
#include "PHY/LTE_REFSIG/defs_NB_IoT.h"
......
openair1/PHY/NBIoT_TRANSPORT/ulsch_demodulation_NB_IoT.c
View file @ 7ceebea9
......@@ -1506,7 +1506,7 @@ void descrambling_NPUSCH_ack_NB_IoT(LTE_DL_FRAME_PARMS *fp,
//////////////////////////////////////////////////////////////////////////////////////////
uint32_t turbo_decoding_NB_IoT(PHY_VARS_eNB *eNB,
NB_IoT_eNB_NULSCH_t *ulsch_NB_IoT,
eNB_rxtx_proc_t *proc,
eNB_rxtx_proc_NB_IoT_NB_IoT_t *proc,
uint8_t npusch_format,
unsigned int G,
uint8_t rvdx,
......@@ -1687,7 +1687,7 @@ void deinterleaving_NPUSCH_data_NB_IoT(NB_IoT_UL_eNB_HARQ_t *ulsch_harq, int16_t
void decode_NPUSCH_msg_NB_IoT(PHY_VARS_eNB *eNB,
LTE_DL_FRAME_PARMS *fp,
eNB_rxtx_proc_t *proc,
eNB_rxtx_proc_NB_IoT_t *proc,
uint8_t npusch_format,
uint16_t N_SF_per_word,
uint16_t Nsc_RU,
......@@ -1852,7 +1852,7 @@ void decode_NPUSCH_msg_NB_IoT(PHY_VARS_eNB *eNB,
uint8_t rx_ulsch_Gen_NB_IoT(PHY_VARS_eNB *eNB,
eNB_rxtx_proc_t *proc,
eNB_rxtx_proc_NB_IoT_t *proc,
uint8_t eNB_id, // this is the effective sector id
uint8_t UE_id,
uint16_t UL_RB_ID_NB_IoT, // 22 , to be included in // to be replaced by NB_IoT_start ??
......
openair1/PHY/defs_L1_NB_IoT.h
View file @ 7ceebea9
......@@ -137,7 +137,7 @@ static inline void* malloc16_clear( size_t size )
////////////////////////////////////////////////////////////////////#ifdef OPENAIR_LTE (check if this is required)
//#include "PHY/LTE_TRANSPORT/defs.h"
#include "PHY/LTE_TRANSPORT/defs_NB_IoT.h"
#include "PHY/NBIoT_TRANSPORT/defs_NB_IoT.h"
#include <pthread.h>
#include "targets/ARCH/COMMON/common_lib.h"
......@@ -1033,5 +1033,5 @@ typedef struct {
#include "PHY/INIT/defs_NB_IoT.h"
#include "PHY/LTE_REFSIG/defs_NB_IoT.h"
#include "PHY/LTE_TRANSPORT/proto_NB_IoT.h"
#include "PHY/NBIoT_TRANSPORT/proto_NB_IoT.h"
#endif // __PHY_DEFS__H__
openair1/PHY/defs_NB_IoT.h
View file @ 7ceebea9
......@@ -135,7 +135,7 @@ static inline void* malloc16_clear( size_t size )
////////////////////////////////////////////////////////////////////#ifdef OPENAIR_LTE (check if this is required)
//#include "PHY/LTE_TRANSPORT/defs.h"
#include "PHY/LTE_TRANSPORT/defs_NB_IoT.h"
#include "PHY/NBIoT_TRANSPORT/defs_NB_IoT.h"
#include "openair2/PHY_INTERFACE/IF_Module_NB_IoT.h"
#include <pthread.h>
......@@ -286,6 +286,21 @@ typedef struct {
pthread_mutex_t mutex_l2;
int instance_cnt_l2;
pthread_attr_t attr_l2;
uint32_t frame_msg5;
uint32_t subframe_msg5;
int subframe_real;
uint8_t flag_scrambling;
uint8_t flag_msg3;
uint8_t counter_msg3;
uint32_t frame_msg3;
uint8_t flag_msg4;
uint8_t counter_msg4;
uint32_t frame_msg4;
uint32_t subframe_msg4;
uint8_t counter_msg5;
uint8_t flag_msg5;
uint32_t frame_dscr_msg5;
uint32_t subframe_dscr_msg5;
} eNB_rxtx_proc_NB_IoT_t;
/*
......@@ -1108,7 +1123,7 @@ static inline int release_thread(pthread_mutex_t *mutex,int *instance_cnt,char *
#include "PHY/LTE_REFSIG/defs_NB_IoT.h"
//#include "PHY/MODULATION/defs.h"
//#include "PHY/LTE_TRANSPORT/proto.h"
#include "PHY/LTE_TRANSPORT/proto_NB_IoT.h"
#include "PHY/NBIoT_TRANSPORT/proto_NB_IoT.h"
//#include "PHY/LTE_ESTIMATION/defs.h"
//#include "SIMULATION/ETH_TRANSPORT/defs.h"
//#endif
......
openair1/PHY/defs_common.h
View file @ 7ceebea9
......@@ -136,6 +136,56 @@ typedef enum {
two=12
} PHICH_RESOURCE_t;
#endif
////////////////////////////////////////// NB-IoT testing ///////////////////////////////////////////////////////////////
typedef struct{
/// The base sequence of DMRS sequence in a cell for 3 tones transmission; see TS 36.211 [21, 10.1.4.1.2]. If absent, it is given by NB-IoT CellID mod 12. Value 12 is not used.
uint16_t threeTone_BaseSequence;
/// Define 3 cyclic shifts for the 3-tone case, see TS 36.211 [21, 10.1.4.1.2].
uint16_t threeTone_CyclicShift;
/// The base sequence of DMRS sequence in a cell for 6 tones transmission; see TS 36.211 [21, 10.1.4.1.2]. If absent, it is given by NB-IoT CellID mod 14. Value 14 is not used.
uint16_t sixTone_BaseSequence;
/// Define 4 cyclic shifts for the 6-tone case, see TS 36.211 [21, 10.1.4.1.2].
uint16_t sixTone_CyclicShift;
/// The base sequence of DMRS sequence in a cell for 12 tones transmission; see TS 36.211 [21, 10.1.4.1.2]. If absent, it is given by NB-IoT CellID mod 30. Value 30 is not used.
uint16_t twelveTone_BaseSequence;
}DMRS_CONFIGx_t;
/// UL-ReferenceSignalsNPUSCH from 36.331 RRC spec
typedef struct {
/// Parameter: Group-hopping-enabled, see TS 36.211 (5.5.1.3). \vr{[0..1]}
uint8_t groupHoppingEnabled;
/// , see TS 36.211 (5.5.1.3). \vr{[0..29]}
uint8_t groupAssignmentNPUSCH;
/// Parameter: cyclicShift, see TS 36.211 (Table 5.5.2.1.1-2). \vr{[0..7]}
uint8_t cyclicShift;
/// nPRS for cyclic shift of DRS \note not part of offical UL-ReferenceSignalsPUSCH ASN1 specification.
uint8_t nPRS[20];
/// group hopping sequence for DMRS, 36.211, Section 10.1.4.1.3. Second index corresponds to the four possible subcarrier configurations
uint8_t grouphop[20][4];
/// sequence hopping sequence for DRS \note not part of offical UL-ReferenceSignalsPUSCH ASN1 specification.
uint8_t seqhop[20];
} UL_REFERENCE_SIGNALS_NPUSCHx_t;
/// PUSCH-ConfigCommon from 36.331 RRC spec.
typedef struct {
/// Number of repetitions for ACK/NACK HARQ response to NPDSCH containing Msg4 per NPRACH resource, see TS 36.213 [23, 16.4.2].
uint8_t ack_NACK_NumRepetitions_Msg4[3];
/// SRS SubframeConfiguration. See TS 36.211 [21, table 5.5.3.3-1]. Value sc0 corresponds to value 0, sc1 to value 1 and so on.
uint8_t srs_SubframeConfig;
/// Parameter: \f$N^{HO}_{RB}\f$, see TS 36.211 (5.3.4). \vr{[0..98]}
DMRS_CONFIGx_t dmrs_Config;
/// Ref signals configuration
UL_REFERENCE_SIGNALS_NPUSCHx_t ul_ReferenceSignalsNPUSCH;
} NPUSCH_CONFIG_COMMONx;
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/// PHICH-Config from 36.331 RRC spec
typedef struct {
/// Parameter: PHICH-Duration, see TS 36.211 (Table 6.9.3-1).
......@@ -722,6 +772,19 @@ typedef struct {
#endif
/// for fair RR scheduler
uint32_t ue_multiple_max;
////////////////////////// NB-IoT testing //////////////////////////////
uint8_t subcarrier_spacing;
uint16_t control_region_size;
uint8_t nb_antennas_tx_NB_IoT; // to replace with NB_IoT_frame_params
NPUSCH_CONFIG_COMMONx npusch_config_common;
uint8_t RB_ID_NB_IoT; // to be used
uint8_t flag_free_sf; // flag to indicate for NPDSCH and NPDCCH process if the current SF already used
/////////////////////////////////////////////////////////////////////
} LTE_DL_FRAME_PARMS;
typedef enum {
......
openair1/SCHED/phy_procedures_lte_common.c
View file @ 7ceebea9
......@@ -31,6 +31,7 @@
*/
#include "PHY/defs_eNB.h"
#include "PHY/defs_UE.h"
#include "PHY/phy_extern.h"
#include "SCHED/sched_common_extern.h"
#include "PHY/LTE_TRANSPORT/transport_common_proto.h"
......@@ -907,7 +908,7 @@ unsigned int is_phich_subframe(LTE_DL_FRAME_PARMS *frame_parms,unsigned char sub
/*
LTE_eNB_UE_stats* get_UE_stats(uint8_t Mod_id, uint8_t CC_id,uint16_t rnti)
{
int8_t UE_id;
......@@ -940,7 +941,7 @@ int8_t find_ue(uint16_t rnti, PHY_VARS_eNB *eNB)
}
return(-1);
}
*/
LTE_DL_FRAME_PARMS* get_lte_frame_parms(module_id_t Mod_id, uint8_t CC_id)
......@@ -949,7 +950,7 @@ LTE_DL_FRAME_PARMS* get_lte_frame_parms(module_id_t Mod_id, uint8_t CC_id)
return(&RC.eNB[Mod_id][CC_id]->frame_parms);
}
/*
MU_MIMO_mode *get_mu_mimo_mode (module_id_t Mod_id, uint8_t CC_id, rnti_t rnti)
{
int8_t UE_id = find_ue( rnti, RC.eNB[Mod_id][CC_id] );
......@@ -959,7 +960,7 @@ MU_MIMO_mode *get_mu_mimo_mode (module_id_t Mod_id, uint8_t CC_id, rnti_t rnti)
return &RC.eNB[Mod_id][CC_id]->mu_mimo_mode[UE_id];
}
*/
int is_srs_occasion_common(LTE_DL_FRAME_PARMS *frame_parms,int frame_tx,int subframe_tx)
{
......
openair1/SCHED/phy_procedures_lte_eNb.c
View file @ 7ceebea9
......@@ -2003,5 +2003,5 @@ void phy_procedures_eNB_uespec_RX(PHY_VARS_eNB *eNB,L1_rxtx_proc_t *proc) {
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_ENB_RX_UESPEC, 0 );
}
#endif
openair1/SCHED_NBIOT/IF_Module_L1_primitives_NB_IoT.c
View file @ 7ceebea9
......@@ -50,7 +50,7 @@ int Irep_to_Nrep_x[16] = {1,2,4,8,16,32,64,128,192,256,384,512,768,1024,1536,204
void handle_nfapi_dlsch_pdu_NB_IoT(PHY_VARS_eNB *eNB,
eNB_rxtx_proc_t *proc,
eNB_rxtx_proc_NB_IoT_t *proc,
nfapi_dl_config_request_pdu_t *dl_config_pdu,
uint8_t *sdu)
{
......@@ -282,7 +282,7 @@ void schedule_response_NB_IoT(Sched_Rsp_NB_IoT_t *Sched_INFO)
//LOG_I(PHY,"schedule_response_NB_IoT\n");
//XXX check if correct to take eNB like this
PHY_VARS_eNB *eNB = PHY_vars_eNB_g[0][Sched_INFO->CC_id];
eNB_rxtx_proc_t *proc = &eNB->proc.proc_rxtx[0];
eNB_rxtx_proc_NB_IoT_t *proc = &eNB->proc.proc_rxtx[0];
NB_IoT_eNB_NPBCH_t *npbch;
///
int i;
......
openair1/SCHED_NBIOT/IF_Module_L1_primitives_NB_IoT.h
View file @ 7ceebea9
......@@ -14,7 +14,7 @@
void handle_nfapi_dlsch_pdu_NB_IoT(PHY_VARS_eNB *eNB,
eNB_rxtx_proc_t *proc,
eNB_rxtx_proc_NB_IoT_t *proc,
nfapi_dl_config_request_pdu_t *dl_config_pdu,
uint8_t *sdu);
......
openair1/SCHED_NBIOT/defs_NB_IoT.h
View file @ 7ceebea9
......@@ -19,22 +19,22 @@ enum openair_HARQ_TYPE_NB_IoT {
void process_schedule_rsp_NB_IoT(Sched_Rsp_NB_IoT_t *sched_rsp,
PHY_VARS_eNB_NB_IoT *eNB,
eNB_rxtx_proc_t *proc);
eNB_rxtx_proc_NB_IoT_t *proc);
/*Processing the ue-specific resources for uplink in NB-IoT*/
void phy_procedures_eNB_uespec_RX_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc); // UL_IND_NB_IoT_t *UL_INFO);
void phy_procedures_eNB_uespec_RX_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc); // UL_IND_NB_IoT_t *UL_INFO);
/* For NB-IoT, we put NPBCH in later part, since it would be scheduled by MAC scheduler,this generates NRS/NPSS/NSSS*/
void common_signal_procedures_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc);
void common_signal_procedures_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc);
/*Generate the ulsch params and do the mapping for the FAPI style parameters to OAI, and then do the packing*/
void generate_eNB_ulsch_params_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,nfapi_hi_dci0_request_pdu_t *hi_dci0_pdu);
void generate_eNB_ulsch_params_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc,nfapi_hi_dci0_request_pdu_t *hi_dci0_pdu);
/*Generate the dlsch params and do the mapping for the FAPI style parameters to OAI, and then do the packing*/
void generate_eNB_dlsch_params_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t * proc,nfapi_dl_config_request_pdu_t *dl_config_pdu);
void generate_eNB_dlsch_params_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t * proc,nfapi_dl_config_request_pdu_t *dl_config_pdu);
/*Process all the scheduling result from MAC and also common signals.*/
void phy_procedures_eNB_TX_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,eNB_rxtx_proc_t *proc,int do_meas);
void phy_procedures_eNB_TX_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,eNB_rxtx_proc_NB_IoT_t *proc,int do_meas);
int8_t find_ue_NB_IoT(uint16_t rnti, PHY_VARS_eNB *eNB);
......@@ -50,10 +50,10 @@ uint32_t is_SIB1_NB_IoT(const frame_t frameP,
uint32_t rx_nprach_NB_IoT(PHY_VARS_eNB *eNB,int frame, uint8_t subframe, uint16_t *rnti, uint16_t *preamble_index, uint16_t *timing_advance);
void npusch_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc);
void npusch_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc);
////////////////// NB-IoT testing ////////////////////
void fill_rx_indication_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,uint8_t data_or_control, uint8_t decode_flag);
void fill_rx_indication_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc,uint8_t data_or_control, uint8_t decode_flag);
void fill_crc_indication_NB_IoT(PHY_VARS_eNB *eNB,int UE_id,int frame,int subframe,uint8_t decode_flag);
......
openair1/SCHED_NBIOT/phy_procedures_lte_eNb_NB_IoT.c
View file @ 7ceebea9
......@@ -213,7 +213,7 @@ uint32_t is_SIB1_NB_IoT(const frame_t frameP,
* It generates NRS/NPSS/NSSS
*
*/
void common_signal_procedures_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc)
void common_signal_procedures_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc)
{
//LTE_DL_FRAME_PARMS *fp = &eNB->frame_parms_NB_IoT;
LTE_DL_FRAME_PARMS *fp = &eNB->frame_parms;
......@@ -401,7 +401,7 @@ void common_signal_procedures_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc)
}
void phy_procedures_eNB_uespec_RX_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc) //UL_IND_NB_IoT_t *UL_INFO)
void phy_procedures_eNB_uespec_RX_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc) //UL_IND_NB_IoT_t *UL_INFO)
{
//RX processing for ue-specific resources (i
//NB_IoT_DL_FRAME_PARMS *fp=&eNB->frame_parms_NB_IoT;
......@@ -437,7 +437,7 @@ void phy_procedures_eNB_uespec_RX_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc
}
/////////////////////////////////////////////////////////// backup ////////////////////////////////////////////////////////
/*void phy_procedures_eNB_uespec_RX_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,eNB_rxtx_proc_t *proc, UL_IND_NB_IoT_t *UL_INFO)
/*void phy_procedures_eNB_uespec_RX_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,eNB_rxtx_proc_NB_IoT_t *proc, UL_IND_NB_IoT_t *UL_INFO)
{
//RX processing for ue-specific resources (i
uint32_t ret=0,i,j,k;
......@@ -762,7 +762,7 @@ void phy_procedures_eNB_uespec_RX_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc
/////Generate eNB ndlsch params for NB-IoT from the NPDCCH PDU of the DCI, modify the input to the Sched Rsp variable////
*/
void generate_eNB_dlsch_params_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t * proc,nfapi_dl_config_request_pdu_t *dl_config_pdu)
void generate_eNB_dlsch_params_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t * proc,nfapi_dl_config_request_pdu_t *dl_config_pdu)
{
int UE_id = -1;
LTE_DL_FRAME_PARMS *fp = &eNB->frame_parms;
......@@ -911,7 +911,7 @@ void generate_eNB_dlsch_params_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t * proc,n
void generate_eNB_ulsch_params_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,nfapi_hi_dci0_request_pdu_t *hi_dci0_pdu) {
void generate_eNB_ulsch_params_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc,nfapi_hi_dci0_request_pdu_t *hi_dci0_pdu) {
//int UE_id = -1;
//int harq_pid = 0;
......@@ -966,7 +966,7 @@ void generate_eNB_ulsch_params_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,nf
* ** redundancy version exist only in UL for NB-IoT and not in DL
*/
void npdsch_procedures(PHY_VARS_eNB_NB_IoT *eNB,
eNB_rxtx_proc_t *proc, //Context data structure for RX/TX portion of subframe processing
eNB_rxtx_proc_NB_IoT_t *proc, //Context data structure for RX/TX portion of subframe processing
NB_IoT_eNB_NDLSCH_t *ndlsch,
//int num_pdcch_symbols, //(BCOM says are not needed
uint8_t *pdu
......@@ -1228,7 +1228,7 @@ extern int oai_exit;
*/
void phy_procedures_eNB_TX_NB_IoT(PHY_VARS_eNB_NB_IoT *eNB,
eNB_rxtx_proc_t *proc,
eNB_rxtx_proc_NB_IoT_t *proc,
int do_meas)
{
int frame = proc->frame_tx;
......@@ -1607,7 +1607,7 @@ void fill_crc_indication_NB_IoT(PHY_VARS_eNB *eNB,int UE_id,int frame,int subfra
pthread_mutex_unlock(&eNB->UL_INFO_mutex);
}
void fill_rx_indication_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,uint8_t data_or_control, uint8_t decode_flag)
void fill_rx_indication_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc,uint8_t data_or_control, uint8_t decode_flag)
{
nfapi_rx_indication_pdu_t *pdu;
nfapi_nb_harq_indication_pdu_t *ack_ind; // &eNB->UL_INFO.nb_harq_ind.nb_harq_indication_body.nb_harq_pdu_list[0] // nb_harq_indication_fdd_rel13->harq_tb1
......@@ -1680,7 +1680,7 @@ void fill_rx_indication_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,uint8_t d
void npusch_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc)
void npusch_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc)
{
uint32_t i;
......
openair1/SCHED_NBIOT/phy_procedures_lte_eNb_nbiot.c
View file @ 7ceebea9
......@@ -127,7 +127,7 @@ extern int rx_sig_fifo;
#endif
uint8_t is_SR_subframe(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,uint8_t UE_id)
uint8_t is_SR_subframe(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc,uint8_t UE_id)
{
const int subframe = proc->subframe_rx;
......@@ -322,7 +322,7 @@ void phy_procedures_emos_eNB_TX(unsigned char subframe, PHY_VARS_eNB *eNB)
}
#endif
void phy_procedures_eNB_S_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,relaying_type_t r_type)
void phy_procedures_eNB_S_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc,relaying_type_t r_type)
{
UNUSED(r_type);
int subframe = proc->subframe_rx;
......@@ -419,7 +419,7 @@ unsigned int taus(void);
DCI_PDU DCI_pdu_tmp;
void pmch_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,PHY_VARS_RN *rn,relaying_type_t r_type) {
void pmch_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc,PHY_VARS_RN *rn,relaying_type_t r_type) {
#if defined(Rel10) || defined(Rel14)
......@@ -506,7 +506,7 @@ int16_t buffer_npusch_ext[153600];
//int32_t llr_msg5[16];
//int32_t y_msg5[16];
void common_signal_procedures (PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc) {
void common_signal_procedures (PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc) {
LTE_DL_FRAME_PARMS *fp=&eNB->frame_parms;
int **txdataF = eNB->common_vars.txdataF[0];
......@@ -877,7 +877,7 @@ if(proc->flag_msg4 == 1 && proc->counter_msg4 > 0)
/////////////////////////////////////////////////////////////////////////
}
void generate_eNB_dlsch_params(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,DCI_ALLOC_t *dci_alloc,const int UE_id) {
void generate_eNB_dlsch_params(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc,DCI_ALLOC_t *dci_alloc,const int UE_id) {
LTE_DL_FRAME_PARMS *fp=&eNB->frame_parms;
int frame = proc->frame_tx;
......@@ -1022,7 +1022,7 @@ void generate_eNB_dlsch_params(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,DCI_ALLOC
}
void generate_eNB_ulsch_params(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,DCI_ALLOC_t *dci_alloc,const int UE_id) {
void generate_eNB_ulsch_params(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc,DCI_ALLOC_t *dci_alloc,const int UE_id) {
int harq_pid;
LTE_DL_FRAME_PARMS *fp=&eNB->frame_parms;
......@@ -1118,7 +1118,7 @@ void generate_eNB_ulsch_params(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,DCI_ALLOC
}
void pdsch_procedures(PHY_VARS_eNB *eNB,
eNB_rxtx_proc_t *proc,
eNB_rxtx_proc_NB_IoT_t *proc,
LTE_eNB_DLSCH_t *dlsch,
LTE_eNB_DLSCH_t *dlsch1,
LTE_eNB_UE_stats *ue_stats,
......@@ -1373,7 +1373,7 @@ void pdsch_procedures(PHY_VARS_eNB *eNB,
}
void phy_procedures_eNB_TX(PHY_VARS_eNB *eNB,
eNB_rxtx_proc_t *proc,
eNB_rxtx_proc_NB_IoT_t *proc,
relaying_type_t r_type,
PHY_VARS_RN *rn,
int do_meas,
......@@ -1748,7 +1748,7 @@ void phy_procedures_eNB_TX(PHY_VARS_eNB *eNB,
}
void process_Msg3(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,uint8_t UE_id, uint8_t harq_pid)
void process_Msg3(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc,uint8_t UE_id, uint8_t harq_pid)
{
// this prepares the demodulation of the first PUSCH of a new user, containing Msg3
int subframe = proc->subframe_rx;
......@@ -1785,7 +1785,7 @@ void process_Msg3(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,uint8_t UE_id, uint8_t
void process_HARQ_feedback(uint8_t UE_id,
PHY_VARS_eNB *eNB,
eNB_rxtx_proc_t *proc,
eNB_rxtx_proc_NB_IoT_t *proc,
uint8_t pusch_flag,
uint8_t *pucch_payload,
uint8_t pucch_sel,
......@@ -2058,7 +2058,7 @@ void process_HARQ_feedback(uint8_t UE_id,
}
void get_n1_pucch_eNB(PHY_VARS_eNB *eNB,
eNB_rxtx_proc_t *proc,
eNB_rxtx_proc_NB_IoT_t *proc,
uint8_t UE_id,
int16_t *n1_pucch0,
int16_t *n1_pucch1,
......@@ -2409,7 +2409,7 @@ void prach_procedures(PHY_VARS_eNB *eNB) {
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_ENB_PRACH_RX,0);*/
}
void pucch_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,int UE_id,int harq_pid,uint8_t do_srs)
void pucch_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc,int UE_id,int harq_pid,uint8_t do_srs)
{
LTE_DL_FRAME_PARMS *fp=&eNB->frame_parms;
uint8_t SR_payload = 0,*pucch_payload=NULL,pucch_payload0[2]= {0,0},pucch_payload1[2]= {0,0};
......@@ -2750,7 +2750,7 @@ void pucch_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,int UE_id,int harq
}
void cba_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,int UE_id,int harq_pid) {
void cba_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc,int UE_id,int harq_pid) {
uint8_t access_mode;
int num_active_cba_groups;
......@@ -3013,7 +3013,7 @@ void init_te_thread(PHY_VARS_eNB *eNB,pthread_attr_t *attr_te) {
}
*/
void eNB_fep_full_2thread(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc_rxtx) {
void eNB_fep_full_2thread(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc_rxtx) {
eNB_proc_t *proc = &eNB->proc;
......@@ -3059,7 +3059,7 @@ void eNB_fep_full_2thread(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc_rxtx) {
void eNB_fep_full(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc_rxtx) {
void eNB_fep_full(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc_rxtx) {
int l;
LTE_DL_FRAME_PARMS *fp=&eNB->frame_parms;
......@@ -3099,7 +3099,7 @@ void eNB_fep_full(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc_rxtx) {
}
}
void eNB_fep_rru_if5(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc_rxtx) {
void eNB_fep_rru_if5(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc_rxtx) {
eNB_proc_t *proc=&eNB->proc;
uint8_t seqno=0;
......@@ -3160,7 +3160,7 @@ if(frame%2==0 && subframe==9)
}
void phy_procedures_eNB_common_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc){
void phy_procedures_eNB_common_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc){
// eNB_proc_t *proc = &eNB->proc;
......@@ -3193,7 +3193,7 @@ void phy_procedures_eNB_common_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc){
}
/*
void fill_rx_indication_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,uint8_t data_or_control, uint8_t msg3_flag)
void fill_rx_indication_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc,uint8_t data_or_control, uint8_t msg3_flag)
{
nfapi_rx_indication_pdu_t *pdu;
......@@ -3235,7 +3235,7 @@ void fill_rx_indication_NB_IoT(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,uint8_t d
}
*/
void phy_procedures_eNB_uespec_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,const relaying_type_t r_type)
void phy_procedures_eNB_uespec_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_NB_IoT_t *proc,const relaying_type_t r_type)
{
//RX processing for ue-specific resources (i
UNUSED(r_type);
......
openair2/LAYER2/MAC/defs_NB_IoT.h
View file @ 7ceebea9
......@@ -16,7 +16,7 @@
//#include "COMMON/openair_defs.h"
#include "COMMON/platform_constants.h"
#include "COMMON/mac_rrc_primitives.h"
#include "PHY/LTE_TRANSPORT/defs_NB_IoT.h"
#include "PHY/NBIoT_TRANSPORT/defs_NB_IoT.h"
//#include "PHY/defs.h"
#include "PHY/defs_L1_NB_IoT.h"
#include "openair2/PHY_INTERFACE/IF_Module_NB_IoT.h"
......@@ -593,7 +593,7 @@ typedef struct {
nprach_parameters_NB_IoT_t nprach_list[3];
nfapi_config_request_t config;
//DLSF Table
DLSF_INFO_t DLSF_information;
......
openair2/LAYER2/PDCP_v10.1.0/pdcp.c
View file @ 7ceebea9
......@@ -56,7 +56,7 @@
#include "UTIL/OSA/osa_defs.h"
#include "openair2/RRC/NAS/nas_config.h"
# include "intertask_interface.h"
#include "enb_paramdef.h"
#include "ENB_APP/enb_paramdef_NB_IoT.h"
# include "gtpv1u_eNB_task.h"
# include "gtpv1u.h"
......@@ -89,7 +89,7 @@ if (NBconfig.NB_IoT_configured > 0)
#include "openair2/RRC/NBIOT/proto_NB_IoT.h"
#undef maxDRB
#define maxDRB maxDRB_NB_r13
#endif
}
/* pdcp module parameters and related functions*/
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment