Skip to content

O
OpenXG-RAN
Commit 87ada841 authored by Parminder Singh's avatar Parminder Singh
Browse files
Options

created a new conf file for PTRS testing 

- removed default PTRS values from default conf file.
parent f9e2d12e
Hide whitespace changes
Inline Side-by-side
Showing with 331 additions and 54 deletions
ci-scripts/conf_files/gnb.band78.tm1.106PRB.usrpn300.conf
View file @ 87ada841
...@@ -191,60 +191,6 @@ gNBs = ...@@ -191,60 +191,6 @@ gNBs =
); );
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = (
{
# PTRS-related config is optional. If any of the frequencyDensity or
# timeDensity parameters are skipped below or if the values are out-
# of-bounds, PTRS will be assumed to be not present.
# DL PTRS related parameters.
# 3GPP TS 38.331 PTRS-DownlinkConfig
# frequencyDensity value range: 1-276
dl_ptrsFreqDensity0_0 = 25;
dl_ptrsFreqDensity1_0 = 75;
# timeDensity value range: 0-29
dl_ptrsTimeDensity0_0 = 2;
dl_ptrsTimeDensity1_0 = 4;
dl_ptrsTimeDensity2_0 = 10;
# epre_Ratio
# 0 = "00", 1 = "01" in TS 38.214, table 4.1-2
dl_ptrsEpreRatio_0 = 0;
# resourceElementOffset
# 0 = offset01 1 = offset02, 2 = offset02
# 3GPP TS 38.331 PTRS-DownlinkConfig; TS 38.211 sec. 7.4.1.2.2
dl_ptrsReOffset_0 = 0;
# UL PTRS related parameters.
# 3GPP TS 38.331 PTRS-UplinkConfig
# frequencyDensity value range: 1-276
ul_ptrsFreqDensity0_0 = 25;
ul_ptrsFreqDensity1_0 = 75;
# timeDensity value range: 0-29
ul_ptrsTimeDensity0_0 = 2;
ul_ptrsTimeDensity1_0 = 4;
ul_ptrsTimeDensity2_0 = 10;
# resourceElementOffset
# 0 = offset01 1 = offset02, 2 = offset02
# TS 38.331 PTRS-UplinkConfig; TS 38.211 sec. 6.4.1.2.2.1
ul_ptrsReOffset_0 = 0;
# maxNrofPorts
# 0 = n1, 1 = n2
ul_ptrsMaxPorts_0 = 0;
# ptrs-Power
# 0 = p00, 1 = p01, 2 = p10, 3 = p11
#ul_ptrsPower_0 = 0;
}
);
# ------- SCTP definitions # ------- SCTP definitions
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.PTRS.usrpx300.conf 0 → 100644
View file @ 87ada841
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
cell_type = "CELL_MACRO_GNB";
gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({mcc = 208; mnc = 93; mnc_length = 2;});
tr_s_preference = "local_mac"
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
# frequencyInfoDL
# this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
absoluteFrequencySSB = 641032;
dl_frequencyBand = 78;
# this is 3600 MHz
dl_absoluteFrequencyPointA = 640000;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=50 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 6366;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
#pdsch-ConfigCommon
#pdschTimeDomainAllocationList (up to 16 entries)
initialDLBWPk0_0 = 0;
#initialULBWPmappingType
#0=typeA,1=typeB
initialDLBWPmappingType_0 = 0;
#this is SS=1,L=13
initialDLBWPstartSymbolAndLength_0 = 40;
initialDLBWPk0_1 = 0;
initialDLBWPmappingType_1 = 0;
#this is SS=2,L=12
initialDLBWPstartSymbolAndLength_1 = 53;
initialDLBWPk0_2 = 0;
initialDLBWPmappingType_2 = 0;
#this is SS=1,L=12
initialDLBWPstartSymbolAndLength_2 = 54;
initialDLBWPk0_3 = 0;
initialDLBWPmappingType_3 = 0;
#this is SS=1,L=4
initialDLBWPstartSymbolAndLength_3 = 57;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 6366;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -118;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
# pusch-ConfigCommon (up to 16 elements)
initialULBWPk2_0 = 6;
initialULBWPmappingType_0 = 1
# this is SS=0 L=11
initialULBWPstartSymbolAndLength_0 = 55;
initialULBWPk2_1 = 6;
initialULBWPmappingType_1 = 1;
# this is SS=0 L=12
initialULBWPstartSymbolAndLength_1 = 69;
initialULBWPk2_2 = 7;
initialULBWPmappingType_2 = 1;
# this is SS=10 L=4
initialULBWPstartSymbolAndLength_2 = 52;
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = 10;
}
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = (
{
# DL PTRS related parameters.
# 3GPP TS 38.331 PTRS-DownlinkConfig
# frequencyDensity value range: 1-276
dl_ptrsFreqDensity0_0 = 25;
dl_ptrsFreqDensity1_0 = 75;
# timeDensity value range: 0-29
dl_ptrsTimeDensity0_0 = 2;
dl_ptrsTimeDensity1_0 = 4;
dl_ptrsTimeDensity2_0 = 10;
# epre_Ratio
# 0 = "00", 1 = "01" in TS 38.214, table 4.1-2
dl_ptrsEpreRatio_0 = 0;
# resourceElementOffset
# 0 = offset01 1 = offset02, 2 = offset02
# 3GPP TS 38.331 PTRS-DownlinkConfig; TS 38.211 sec. 7.4.1.2.2
dl_ptrsReOffset_0 = 0;
# UL PTRS related parameters.
# 3GPP TS 38.331 PTRS-UplinkConfig
# frequencyDensity value range: 1-276
ul_ptrsFreqDensity0_0 = 25;
ul_ptrsFreqDensity1_0 = 75;
# timeDensity value range: 0-29
ul_ptrsTimeDensity0_0 = 2;
ul_ptrsTimeDensity1_0 = 4;
ul_ptrsTimeDensity2_0 = 10;
# resourceElementOffset
# 0 = offset01 1 = offset02, 2 = offset02
# TS 38.331 PTRS-UplinkConfig; TS 38.211 sec. 6.4.1.2.2.1
ul_ptrsReOffset_0 = 0;
# maxNrofPorts
# 0 = n1, 1 = n2
ul_ptrsMaxPorts_0 = 0;
# ptrs-Power
# 0 = p00, 1 = p01, 2 = p10, 3 = p11
#ul_ptrsPower_0 = 0;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_S1_MME = "eth0";
GNB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
GNB_INTERFACE_NAME_FOR_S1U = "eth0";
GNB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
eNB_instances = [0];
#beamforming 1x4 matrix:
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
sdr_addrs = "type=x300";
clock_src = "external";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment