Skip to content

O
OpenXG-RAN
Commit af45734e authored by Rohit Gupta's avatar Rohit Gupta
Browse files
Options

Merge branch 'enhancement-16-tm_rrc_reconfig' into develop

parents 12a304e6 3e86219e
Hide whitespace changes
Inline Side-by-side
Showing with 5200 additions and 2184 deletions
cmake_targets/autotests/README.txt
View file @ af45734e
......@@ -99,25 +99,31 @@ Obj.# Case# Test# Description
01 51 06 mbmssim (TBD)
01 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX, 2TX/2RX
01 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for 1TX/1RX (TM1), 2TX/2RX (TM2)
01 55 00 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
01 55 01 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
01 55 02 Band 7 FDD 20MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
01 55 03 Band 7 FDD 5MHz DL Throughput (UDP) for 300 sec for 1TX/1RX
01 55 04 Band 7 FDD 10MHz DL Throughput (UDP) for 300 sec for 1TX/1RX
01 55 05 Band 7 FDD 20MHz DL Throughput (UDP) for 300 sec for 1TX/1RX
01 55 06 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 2TX/2RX
01 55 07 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 2TX/2RX
01 55 08 Band 7 FDD 20MHz UL Throughput (UDP) for 300 sec for 2TX/2RX
01 55 09 Band 7 FDD 5MHz DL Throughput (UDP) for 300 sec for 2TX/2RX
01 55 10 Band 7 FDD 10MHz DL Throughput (UDP) for 300 sec for 2TX/2RX
01 55 11 Band 7 FDD 20MHz DL Throughput (UDP) for 300 sec for 2TX/2RX
01 55 06 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 55 07 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 55 08 Band 7 FDD 20MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 55 09 Band 7 FDD 5MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 55 10 Band 7 FDD 10MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 55 11 Band 7 FDD 20MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 55 12 Band 7 FDD 5MHz UL Throughput (TCP) for 300 sec for 1TX/1RX
01 55 13 Band 7 FDD 10MHz UL Throughput (TCP) for 300 sec for 1TX/1RX
01 55 14 Band 7 FDD 20MHz UL Throughput (TCP) for 300 sec for 1TX/1RX
01 55 15 Band 7 FDD 5MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
01 55 16 Band 7 FDD 10MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
01 55 17 Band 7 FDD 20MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
01 55 18 Band 7 FDD 5MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 55 19 Band 7 FDD 10MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 55 20 Band 7 FDD 20MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 55 21 Band 7 FDD 5MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 55 22 Band 7 FDD 10MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 55 23 Band 7 FDD 20MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 56 lte-softmodem tests with USRP B210 RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE
01 56 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
......@@ -135,7 +141,7 @@ Obj.# Case# Test# Description
01 57 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 57 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 58 lte-softmodem tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 2TX/2RX
01 58 lte-softmodem tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for 1TX/1RX (TM1), 2TX/2RX(TM2)
01 58 00 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
01 58 01 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
01 58 02 Band 7 FDD 20MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
......@@ -148,6 +154,18 @@ Obj.# Case# Test# Description
01 58 09 Band 7 FDD 5MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
01 58 10 Band 7 FDD 10MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
01 58 11 Band 7 FDD 20MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
01 58 12 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 58 13 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 58 14 Band 7 FDD 20MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 58 15 Band 7 FDD 5MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 58 16 Band 7 FDD 10MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 58 17 Band 7 FDD 20MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 58 18 Band 7 FDD 5MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 58 19 Band 7 FDD 10MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 58 20 Band 7 FDD 20MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 58 21 Band 7 FDD 5MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 58 22 Band 7 FDD 10MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 58 23 Band 7 FDD 20MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 59 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE
......@@ -160,7 +178,7 @@ Obj.# Case# Test# Description
01 60 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 60 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 61 lte-softmodem tests with EXMIMO RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 2TX/2RX
01 61 lte-softmodem tests with EXMIMO RF as eNB and ALU EPC w/ Bandrich COTS UE for 1TX/1RX, 2TX/2RX
01 61 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 61 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 61 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
......@@ -178,7 +196,7 @@ Obj.# Case# Test# Description
01 63 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 63 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 65 00 lte-softmodem tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 65 00 lte-softmodem tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for 1TX/1RX
01 65 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 65 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 65 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
......@@ -220,7 +238,7 @@ Obj.# Case# Test# Description
01 85 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 85 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
02 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Sony Experia M4 COTS UE for TX/1RX
02 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Sony Experia M4 COTS UE for 1TX/1RX and 2TX/2RX (TM2)
02 55 00 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
02 55 01 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
02 55 02 Band 7 FDD 20MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
......@@ -233,7 +251,18 @@ Obj.# Case# Test# Description
02 55 09 Band 7 FDD 5MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
02 55 10 Band 7 FDD 10MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
02 55 11 Band 7 FDD 20MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
02 55 12 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
02 55 13 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
02 55 14 Band 7 FDD 20MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
02 55 15 Band 7 FDD 5MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
02 55 16 Band 7 FDD 10MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
02 55 17 Band 7 FDD 20MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
02 55 18 Band 7 FDD 5MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
02 55 19 Band 7 FDD 10MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
02 55 20 Band 7 FDD 20MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
02 55 21 Band 7 FDD 5MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
02 55 22 Band 7 FDD 10MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
02 55 23 Band 7 FDD 20MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 64 lte-softmodem-noS1 tests
......@@ -249,4 +278,4 @@ Obj.# Case# Test# Description
#TODO: Add test cases for 10,20 MHz
#TODO: Add test cases for TDD/FDD
#TODO: Test and compile seperately for Rel8/Rel10
#TODO: Case03.py eMBMS test case
\ No newline at end of file
#TODO: Case03.py eMBMS test case
cmake_targets/autotests/test_case_list.xml
View file @ af45734e
This source diff could not be displayed because it is too large. You can view the blob instead.
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpb210.conf
View file @ af45734e
......@@ -33,6 +33,7 @@ eNBs =
Nid_cell = 0;
N_RB_DL = 100;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
......@@ -46,7 +47,7 @@ eNBs =
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -26;
pdsch_referenceSignalPower = -32;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf
View file @ af45734e
......@@ -32,6 +32,7 @@ eNBs =
Nid_cell = 0;
N_RB_DL = 100;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 32;
......@@ -96,6 +97,7 @@ eNBs =
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.100PRB.usrpb210.conf 0 → 100644
View file @ af45734e
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "94";
////////// Physical parameters:
component_carriers = (
{
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 100;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 2;
nb_antennas_tx = 2;
nb_antennas_rx = 2;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -32;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 2;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.171";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.150/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.150/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.100PRB.usrpx310.conf 0 → 100644
View file @ af45734e
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 100;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 2;
nb_antennas_tx = 2;
nb_antennas_rx = 2;
tx_gain = 32;
rx_gain = 116;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -23;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -108;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 2;
ue_TransmissionMode = 2;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
log_config :
{
global_log_level ="debug";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf 0 → 100644
View file @ af45734e
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "94";
////////// Physical parameters:
component_carriers = (
{
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 2;
nb_antennas_tx = 2;
nb_antennas_rx = 2;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -28;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 2;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.171";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.150/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.150/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf 0 → 100644
View file @ af45734e
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 2;
nb_antennas_tx = 2;
nb_antennas_rx = 2;
tx_gain = 32;
rx_gain = 116;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -18;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -108;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 2;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
log_config :
{
global_log_level ="debug";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment