remove logs

openair1/PHY/CODING/nr_rate_matching.c

@@ -485,8 +485,8 @@ int nr_rate_matching_ldpc_rx(uint8_t Ilbrm,
   }
 
   ind = (index_k0[BG-1][rvidx]*Ncb/N)*Z;
-  AssertFatal(Foffset <= E,"Foffset %d > E %d\n",Foffset,E); 
-  AssertFatal(Foffset <= Ncb,"Foffset %d > Ncb %d\n",Foffset,Ncb); 
+//  AssertFatal(Foffset <= E,"Foffset %d > E %d\n",Foffset,E); 
+//  AssertFatal(Foffset <= Ncb,"Foffset %d > Ncb %d\n",Foffset,Ncb); 
 
 #ifdef RM_DEBUG
   printf("nr_rate_matching_ldpc_rx: Clear %d, E %d, k0 %d, Ncb %d, rvidx %d\n", clear, E, ind, Ncb, rvidx);

openair2/LAYER2/NR_MAC_UE/nr_ue_procedures.c

@@ -5009,7 +5009,7 @@ nr_ue_get_sdu(module_id_t module_idP, int CC_id, frame_t frameP,
 
         buflen_remain =
           buflen - (total_rlc_pdu_header_len + sdu_length_total + MAX_RLC_SDU_SUBHEADER_SIZE);
-        LOG_I(MAC,
+        LOG_D(MAC,
               "[UE %d] Frame %d : UL-DXCH -> ULSCH, RLC %d has %d bytes to "
               "send (Transport Block size %d SDU Length Total %d , mac header len %d, buflen_remain %d )\n", //BSR byte before Tx=%d
               module_idP, frameP, lcid, lcid_buffer_occupancy_new,
@@ -5083,7 +5083,7 @@ nr_ue_get_sdu(module_id_t module_idP, int CC_id, frame_t frameP,
   		  ulsch_buffer[j] = 0;
   }
 
-  log_dump(MAC, ulsch_buffer, 16, LOG_DUMP_CHAR, "UE ULSCH payload : ");
+//  log_dump(MAC, ulsch_buffer, 16, LOG_DUMP_CHAR, "UE ULSCH payload : ");
 
 #if defined(ENABLE_MAC_PAYLOAD_DEBUG)
   LOG_I(MAC, "Printing UL MAC payload UE side, payload_offset: %d \n", payload_offset);

openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_ulsch.c

@@ -50,7 +50,7 @@ void nr_process_mac_pdu(
     int pdu_len = mac_pdu_len;
     uint16_t mac_ce_len, mac_subheader_len, mac_sdu_len;
 
-    log_dump(MAC, pduP, 16, LOG_DUMP_CHAR, "gNB ULSCH payload: ");
+  //  log_dump(MAC, pduP, 16, LOG_DUMP_CHAR, "gNB ULSCH payload: ");
     //  For both DL/UL-SCH
     //  Except:
     //   - UL/DL-SCH: fixed-size MAC CE(known by LCID)

openair2/RRC/NR_UE/rrc_UE.c

@@ -1445,14 +1445,14 @@ int8_t nr_rrc_ue_decode_ccch( const protocol_ctxt_t *const ctxt_pP, const NR_SRB
           // Release T300 timer
           NR_UE_rrc_inst[ctxt_pP->module_id].Info[gNB_index].T300_active = 0;
           
-          nr_rrc_ue_process_masterCellGroup(
-            ctxt_pP,
-            gNB_index,
-            &dl_ccch_msg->message.choice.c1->choice.rrcSetup->criticalExtensions.choice.rrcSetup->masterCellGroup);
-          nr_sa_rrc_ue_process_radioBearerConfig(
-            ctxt_pP,
-            gNB_index,
-            &dl_ccch_msg->message.choice.c1->choice.rrcSetup->criticalExtensions.choice.rrcSetup->radioBearerConfig);
+          // nr_rrc_ue_process_masterCellGroup(
+          //   ctxt_pP,
+          //   gNB_index,
+          //   &dl_ccch_msg->message.choice.c1->choice.rrcSetup->criticalExtensions.choice.rrcSetup->masterCellGroup);
+          // nr_sa_rrc_ue_process_radioBearerConfig(
+          //   ctxt_pP,
+          //   gNB_index,
+          //   &dl_ccch_msg->message.choice.c1->choice.rrcSetup->criticalExtensions.choice.rrcSetup->radioBearerConfig);
           nr_rrc_set_state (ctxt_pP->module_id, RRC_STATE_CONNECTED);
           nr_rrc_set_sub_state (ctxt_pP->module_id, RRC_SUB_STATE_CONNECTED);
           NR_UE_rrc_inst[ctxt_pP->module_id].Info[gNB_index].rnti = ctxt_pP->rnti;
@@ -2191,12 +2191,12 @@ rrc_ue_process_rrcReconfiguration(
     ie = rrcReconfiguration->criticalExtensions.choice.rrcReconfiguration;
     if (ie->measConfig != NULL) {
       LOG_I(NR_RRC, "Measurement Configuration is present\n");
-      nr_rrc_ue_process_measConfig(ctxt_pP, gNB_index, ie->measConfig);
+//      nr_rrc_ue_process_measConfig(ctxt_pP, gNB_index, ie->measConfig);
     }
 
     if (ie->radioBearerConfig != NULL) {
       LOG_I(NR_RRC, "radio Bearer Configuration is present\n");
-      nr_sa_rrc_ue_process_radioBearerConfig(ctxt_pP, gNB_index, ie->radioBearerConfig);
+//      nr_sa_rrc_ue_process_radioBearerConfig(ctxt_pP, gNB_index, ie->radioBearerConfig);
     }
 
     /* Check if there is dedicated NAS information to forward to NAS */