Remove UESIM_EXPANSION

This completely removes the UESIM_EXPANSION define: it does not compile
at the moment. Its function was to multiplex multiple UEs on the same
TUN interface. However, this functionality is not needed since it is
possible to allocate many TUN devices (i.e., >= 32).

cmake_targets/CMakeLists.txt

@@ -824,7 +824,6 @@ add_boolean_option(MESSAGE_CHART_GENERATOR_RLC_MAC False "trace RLC-MAC exchange
 add_boolean_option(MESSAGE_CHART_GENERATOR_PHY     False "trace some PHY exchanges in sequence diagrams")
 
 add_boolean_option(UE_EXPANSION             False         "enable UE_EXPANSION with max 256 UE")
-add_boolean_option(UESIM_EXPANSION          False         "enable UESIM_EXPANSION with max 256 UE")
 add_boolean_option(PHY_RM                   False         "enable PHY_RM with phy resource management")
 add_boolean_option(UDP_1MS                  False         "enable using UDP socket for VNF-PNF interface")
 

cmake_targets/build_oai

@@ -42,7 +42,6 @@ MSC_GEN=0
 XFORMS="True"
 SKIP_SHARED_LIB_FLAG="False"
 UE_EXPANSION="False"
-UESIM_EXPANSION="False"
 PHY_RM="False"
 UDP_1MS="False"
 PRINT_STATS="False"
@@ -267,10 +266,6 @@ function main() {
             UE_EXPANSION="True"
             echo_info "Will compile with UE_EXPANSION"
             shift;;
-       --musim)
-            UESIM_EXPANSION="True"
-            echo_info "Will compile with UESIM_EXPANSION"
-            shift;;
        --rm)
             PHY_RM="True"
             echo_info "Will manage phy resource"
@@ -605,7 +600,6 @@ function main() {
     echo "set ( PHY_RM $PHY_RM )"                                         >>  $cmake_file
     echo "set ( UDP_1MS $UDP_1MS )"                                       >>  $cmake_file
     echo "set ( PHYSIM $PHYSIM )"                                         >>  $cmake_file
-    echo "set ( UESIM_EXPANSION $UESIM_EXPANSION )"                       >> $cmake_file
     echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )"                            >> $cmake_file
     echo "set ( RF_BOARD \"${HW}\")"                                      >> $cmake_file
     echo "set ( TRANSP_PRO \"${TP}\")"                                    >> $cmake_file

cmake_targets/phy_simulators/CMakeLists.txt

@@ -4,7 +4,6 @@ set ( CMAKE_BUILD_TYPE  )
 set ( CFLAGS_PROCESSOR_USER "" )
 set ( UE_EXPANSION False )
 set ( PRE_SCD_THREAD False )
-set ( UESIM_EXPANSION False )
 set ( ENABLE_VCD_FIFO False )
 set ( RF_BOARD "None")
 set ( TRANSP_PRO "None")

openair2/COMMON/platform_constants.h

@@ -65,18 +65,6 @@
 #define MAX_NR_RRC_UE_CONTEXTS 64
 
 #ifndef UE_EXPANSION
-  // TODO:L2 FAPI simulator.
-  // UESIM_EXPANSION is used to be same value of MAX_MOBILES_PER_ENB
-  // in eNB and UE.
-  // now , if we use --mu option in UE, compiling error will occur.
-  // This problem will be fixed in the future.
-  #ifdef UESIM_EXPANSION
-    #define MAX_MOBILES_PER_ENB         256
-    #define MAX_MOBILES_PER_ENB_NB_IoT  256
-    #define MAX_MOBILES_PER_GNB         256
-    #define MAX_eNB                      2
-    #define MAX_gNB                      2
-  #else
     #ifdef LARGE_SCALE
       #define MAX_MOBILES_PER_ENB         128
       #define MAX_MOBILES_PER_ENB_NB_IoT  128
@@ -90,7 +78,6 @@
       #define MAX_eNB                      2
       #define MAX_gNB                      2
     #endif
-  #endif
 #else
   #define MAX_MOBILES_PER_ENB         256
   #define MAX_MOBILES_PER_ENB_NB_IoT  256

openair2/LAYER2/PDCP_v10.1.0/pdcp.c

@@ -1039,17 +1039,7 @@ pdcp_data_ind(
            * TODO: be sure of this
            */
           if (NFAPI_MODE == NFAPI_UE_STUB_PNF ) {
-#ifdef UESIM_EXPANSION
-
-            if (UE_NAS_USE_TUN) {
             pdcpHead->inst  = ctxt_pP->module_id;
-            } else {
-              pdcpHead->inst  = 0;
-            }
-
-#else
-            pdcpHead->inst  = ctxt_pP->module_id;
-#endif
           } else {  // nfapi_mode
             if (UE_NAS_USE_TUN) {
               pdcpHead->inst  = ctxt_pP->module_id;

openair2/LAYER2/PDCP_v10.1.0/pdcp_fifo.c

@@ -86,12 +86,6 @@ extern struct msghdr nas_msg_rx;
 
 
 
-#ifdef UESIM_EXPANSION
-  extern uint16_t inst_pdcp_list[NUMBER_OF_UE_MAX];
-#endif
-
-
-
 #  include "gtpv1u_eNB_task.h"
 #  include "gtpv1u_eNB_defs.h"
 
@@ -506,11 +500,7 @@ int pdcp_fifo_read_input_sdus_fromnetlinksock (const protocol_ctxt_t *const  ctx
             }
           } else { // ctxt.enb_flag => UE
             if (NFAPI_MODE == NFAPI_UE_STUB_PNF) {
-#ifdef UESIM_EXPANSION
-              ctxt.module_id = inst_pdcp_list[pdcp_read_header_g.inst];
-#else
               ctxt.module_id = pdcp_read_header_g.inst;
-#endif
             } else {
               ctxt.module_id = 0;
             }

openair2/NETWORK_DRIVER/UE_IP/common.c

@@ -287,18 +287,6 @@ ue_ip_common_ip2wireless(
         printk("[UE_IP_DRV][%s] Dest %d.%d.%d.%d\n",__FUNCTION__, dst_addr[0],dst_addr[1],dst_addr[2],dst_addr[3]);
       }
 
-      // modify inst by IP address for the U-Plane of multiple UEs while L2 fapi simulator start
-#ifdef UESIM_EXPANSION
-
-      if ((src_addr[3] - 2)> instP) {
-        pdcph.inst = src_addr[3] - 2;
-        printk("[UE_IP_DRV] change INST from %d to %d\n",instP, pdcph.inst);
-        instP = src_addr[3] - 2;
-        priv_p=netdev_priv(ue_ip_dev[instP]);
-      }
-
-#endif
-      // modify inst by IP address for the U-Plane of multiple UEs while L2 fapi simulator end
       //get Ipv4 address and pass to PCDP header
       printk("[UE_IP_DRV] source Id: 0x%08x\n",pdcph.sourceL2Id );
       printk("[UE_IP_DRV] destinationL2Id Id: 0x%08x\n",pdcph.destinationL2Id );

openair3/NAS/UE/ESM/esm_ebr_context.c

@@ -55,10 +55,6 @@ Description Defines functions used to handle EPS bearer contexts.
 #include <sys/socket.h>
 #include <netinet/in.h>
 #include <arpa/inet.h>
-#ifdef UESIM_EXPANSION
-  #include "openairinterface5g_limits.h"
-  extern uint16_t inst_pdcp_list[NUMBER_OF_UE_MAX];
-#endif
 
 /****************************************************************************/
 /****************  E X T E R N A L    D E F I N I T I O N S  ****************/
@@ -269,24 +265,6 @@ int esm_ebr_context_create(
 
               if(NFAPI_MODE==NFAPI_UE_STUB_PNF) {
                 // this is for L2 FAPI simulator.
-                // change for multiple UE's like 256UEs.
-                // if it's made too many tables , OS may crush so we use one table.
-                if(PDCP_USE_NETLINK) {
-#ifdef UESIM_EXPANSION
-                  uint16_t inst_nic = (pdn->ip_addr[3] & 0x000000FF) - 2;
-                  res = sprintf(command_line,
-                                "ifconfig %s%d %s netmask %s broadcast %s up && "
-                                "ip rule add from %s/24 table %d && "
-                                "ip rule add to %s/24 table %d && "
-                                "ip route add default dev %s%d table %d",
-                                UE_NAS_USE_TUN?"oaitun_ue":"oip",
-                                inst_nic + 1, ipv4_addr, netmask, broadcast,
-                                ipv4_addr, 201,
-                                ipv4_addr, 201,
-                                UE_NAS_USE_TUN?"oaitun_ue":"oip",
-                                inst_nic + 1, 201);
-                  inst_pdcp_list[inst_nic] = ueid;
-#else
                   res = sprintf(command_line,
                                 "ifconfig %s%d %s netmask %s broadcast %s up && "
                                 "ip rule add from %s/32 table %d && "
@@ -298,8 +276,6 @@ int esm_ebr_context_create(
                                 ipv4_addr, ueid + 201,
                                 UE_NAS_USE_TUN?"oaitun_ue":"oip",
                                 ueid + 1, ueid + 201);
-#endif
-                } // PDCP_USE_NETLINK
               } else {
                 res = sprintf(command_line,
                               "ifconfig %s%d %s netmask %s broadcast %s up && "

targets/COMMON/openairinterface5g_limits.h

@@ -8,12 +8,6 @@
 #        define NUMBER_OF_NR_RU_MAX 2
 #        ifndef PHYSIM
 #            ifndef UE_EXPANSION
-// TODO:L2 FAPI simulator.
-// UESIM_EXPANSION is used to be same value of NUMBER_OF_UE_MAX
-// in eNB and UE.
-// now , if we use --mu option in UE, compiling error will occur.
-// This problem will be fixed in the future.
-#                ifndef UESIM_EXPANSION
 #                    define NUMBER_OF_UE_MAX 4
 #                    define NUMBER_OF_NR_UE_MAX 4
 #                    define NUMBER_OF_UCI_VARS_MAX 14
@@ -23,12 +17,6 @@
 #                    define NUMBER_OF_UE_MAX 256
 #                    define NUMBER_OF_UCI_VARS_MAX 256
 #                    define NUMBER_OF_CONNECTED_eNB_MAX 1
-#                    define NUMBER_OF_CONNECTED_gNB_MAX 3
-#                endif
-#            else
-#                    define NUMBER_OF_UE_MAX 256
-#                    define NUMBER_OF_UCI_VARS_MAX 256
-#                    define NUMBER_OF_CONNECTED_eNB_MAX 1
 #                    define NUMBER_OF_CONNECTED_gNB_MAX 1
 #            endif
 #        else
@@ -48,7 +36,6 @@ eNB process will exit because unexpected access happens.
 Now some parts are using NUMBER_OF_UE_MAX
 and the other are using MAX_MOBILES_PER_ENB in for-loop.
 */
-#            ifndef UESIM_EXPANSION
 #                define NUMBER_OF_UE_MAX 16
 #                define NUMBER_OF_UCI_VARS_MAX 56
 #                define NUMBER_OF_CONNECTED_eNB_MAX 3
@@ -57,12 +44,6 @@ and the other are using MAX_MOBILES_PER_ENB in for-loop.
 #                define NUMBER_OF_UE_MAX 256
 #                define NUMBER_OF_UCI_VARS_MAX 256
 #                define NUMBER_OF_CONNECTED_eNB_MAX 1
-#                define NUMBER_OF_CONNECTED_gNB_MAX 3
-#            endif
-#        else
-#                define NUMBER_OF_UE_MAX 256
-#                define NUMBER_OF_UCI_VARS_MAX 256
-#                define NUMBER_OF_CONNECTED_eNB_MAX 1
 #                define NUMBER_OF_CONNECTED_gNB_MAX 1
 #        endif
 #        if defined(STANDALONE) && STANDALONE==1

targets/RT/USER/lte-uesoftmodem.c

@@ -95,9 +95,6 @@ pthread_mutex_t nfapi_sync_mutex;
 int nfapi_sync_var=-1; //!< protected by mutex \ref nfapi_sync_mutex
 
 
-#ifdef UESIM_EXPANSION
-  uint16_t inst_pdcp_list[NUMBER_OF_UE_MAX];
-#endif
 uint16_t sf_ahead=2;
 int tddflag;
 char *emul_iface;
@@ -546,9 +543,6 @@ void init_pdcp(void) {
 int main( int argc, char **argv ) {
   int CC_id;
   uint8_t  abstraction_flag=0;
-#ifdef UESIM_EXPANSION
-  memset(inst_pdcp_list, 0, sizeof(inst_pdcp_list));
-#endif
   // Default value for the number of UEs. It will hold,
   // if not changed from the command line option --num-ues
   NB_UE_INST=1;