* The number (N) of measured RS resources to be reported per report setting in a non-group-based report. N <= N_max, where N_max is either 2 or 4 depending on UE
* capability. FFS: The signaling mechanism for the gNB to select a subset of N beams for the UE to measure and report.
* When the field is absent the UE applies the value 1
* The number (N) of measured RS resources to be reported per report setting in a non-group-based report. N <= N_max, where N_max is either 2 or 4 depending on UE
* capability. FFS: The signaling mechanism for the gNB to select a subset of N beams for the UE to measure and report.
* When the field is absent the UE applies the value 1
AssertFatal(RC.nrmac[Mod_idP]->config[0].carrier_config.num_tx_ant.value>8,"Number of antennas %d are out of range",RC.nrmac[Mod_idP]->config[0].carrier_config.num_tx_ant.value);
AssertFatal(RC.nrmac[Mod_idP]->config[0].carrier_config.num_tx_ant.value>8,"Number of antennas %d are out of range",RC.nrmac[Mod_idP]->config[0].carrier_config.num_tx_ant.value);
}
}
}
}
}
elseAssertFatal(1==0,"Only periodic resource configuration currently supported\n");
AssertFatal(RC.nrmac[Mod_idP]->config[0].carrier_config.num_tx_ant.value>8,"Number of antennas %d are out of range",RC.nrmac[Mod_idP]->config[0].carrier_config.num_tx_ant.value);
* From spec 38.331 from the IE CSI-ResourceConfig for SSB RSRP reporting we can configure only one resource set
LOG_D(PHY,"SFN/SF:%d%d reportQuantity type = %d\n",frame,slot,reportQuantity_type);
* From spec 38.214 section 5.2.1.2 For periodic and semi-persistent CSI Resource Settings, the number of CSI-RS Resource Sets configured is limited to S=1
/*! As per the spec 38.212 and table: 6.3.1.1.2-12 in a single UCI sequence we can have multiple CSI_report
* the number of CSI_report will depend on number of CSI resource sets that are configured in CSI-ResourceConfig RRC IE
* From spec 38.331 from the IE CSI-ResourceConfig for SSB RSRP reporting we can configure only one resource set
* From spec 38.214 section 5.2.1.2 For periodic and semi-persistent CSI Resource Settings, the number of CSI-RS Resource Sets configured is limited to S=1
*/
/** from 38.214 sec 5.2.1.4.2
/** from 38.214 sec 5.2.1.4.2
- if the UE is configured with the higher layer parameter groupBasedBeamReporting set to 'disabled', the UE is
- if the UE is configured with the higher layer parameter groupBasedBeamReporting set to 'disabled', the UE is
not required to update measurements for more than 64 CSI-RS and/or SSB resources, and the UE shall report in
not required to update measurements for more than 64 CSI-RS and/or SSB resources, and the UE shall report in
a single report nrofReportedRS (higher layer configured) different CRI or SSBRI for each report setting
a single report nrofReportedRS (higher layer configured) different CRI or SSBRI for each report setting
- if the UE is configured with the higher layer parameter groupBasedBeamReporting set to 'enabled', the UE is not
- if the UE is configured with the higher layer parameter groupBasedBeamReporting set to 'enabled', the UE is not
required to update measurements for more than 64 CSI-RS and/or SSB resources, and the UE shall report in a
required to update measurements for more than 64 CSI-RS and/or SSB resources, and the UE shall report in a
single reporting instance two different CRI or SSBRI for each report setting, where CSI-RS and/or SSB
single reporting instance two different CRI or SSBRI for each report setting, where CSI-RS and/or SSB
resources can be received simultaneously by the UE either with a single spatial domain receive filter, or with
resources can be received simultaneously by the UE either with a single spatial domain receive filter, or with
//if the UE is configured with the higher layer parameter groupBasedBeamReporting set to 'disabled', the UE is not required to update measurements for more than 64 CSI-RS and/or SSB resources, and the UE shall report in a single report nrofReportedRS (higher layer configured) different CRI or SSBRI for each report setting.