2022.1.1 patch: VF 4K queue support for CPM5 provided RTL support is available

2022.1.1 patch: VF 4K queue support for CPM5 provided RTL support is available

QDMA/DPDK/RELEASE

-RELEASE: 2022.1
-===============
+RELEASE: 2022.1.1
+=================
 
 This release is based on DPDK v20.11 and contains QDMA poll mode driver and
 QDMA test application.
@@ -97,11 +97,16 @@ CPM5
 	- Debug register dump for ST and MM Errors
 	- Dual Instance support
 
+2022.1.1 Patch Updates
+----------------------
+- Added VF 4K queues support for CPM5 design. This feature is applicable only when corresponding RTL support is added.
+
 KNOWN ISSUE:
 ============
 - CPM5 Only
-	- Sufficient host memory is required to accommodate 4K queues. Tested only upto 2048 queues with our test environment though driver supports 4K queues.
+	- Sufficient host memory is required to accommodate 4K queues. Tested only upto 2048 queues for PFs with our test environment though driver supports 4K queues.
 	- Tandem Boot support not available completely
+	- VF 4K queue support is not fully verified due to pdi issues
 
 - All Designs
 	- Function Level Reset(FLR) of PF device when VFs are attached to this PF results in mailbox communication failure

QDMA/DPDK/docs/README.txt

+###############################################################################
+
+                 Xilinx QDMA Software README
+
+###############################################################################
+
+_____________________________________________________________________________
+Contents
+
+1.   Setup: Download and modifications
+2    Setup: Host system
+3.   Setup: Build Commands
+4.   Compile Test application
+5.   Running the DPDK software test application
+_____________________________________________________________________________
+
+
+Note: This DPDK driver and applciation were tested on Ubuntu 18.04 machine.
+
+
+1.) Setup: Download and modifications
+
+The reference driver code requires DPDK version 20.11.
+Follow the steps below to download the proper version of DPDK and apply
+driver code and test application supplied in the GitHub.
+
+Extract the DPDK driver software database from the Xilinx GitHub to the server where VCU1525
+is installed. Henceforth, this area is referred as <dpdk_sw_database>.
+
+Create a directory for the DPDK download on the server where the VCU1525
+is installed and move to this directory.
+
+ $ mkdir <server_dir>/<dpdk_test_area>
+ $ cd <server_dir>/<dpdk_test_area>
+ $ git clone http://dpdk.org/git/dpdk-stable
+ $ cd dpdk-stable
+ $ git checkout v20.11
+ $ git clone git://dpdk.org/dpdk-kmods
+ $ cp -r <dpdk_sw_database>/drivers/net/qdma ./drivers/net/
+ $ cp -r <dpdk_sw_database>/examples/qdma_testapp ./examples/
+
+	Additionally, make below changes to the DPDK 20.11 tree to build QDMA driver,
+	support 4K queues and populate Xilinx devices for binding.
+
+		i. Add QDMA driver
+			a. To support 4K queues and 256 PCIe functions, update below configurations	in ./config/rte_config.h
+				CONFIG_RTE_MAX_MEMZONE=40960
+				CONFIG_RTE_MAX_ETHPORTS=256
+				CONFIG_RTE_MAX_QUEUES_PER_PORT=4096
+
+			b. Add below lines to ./config/meson.build in DPDK 20.11 tree
+				# Set maximum Ethernet ports to 256
+				dpdk_conf.set('RTE_MAX_ETHPORTS', 256)
+
+				# Set maximum VFIO Groups to 256
+				dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 256)
+
+			c. Add below lines to ./config/rte_config.h to enable driver debug logs
+				#define RTE_LIBRTE_QDMA_DEBUG_DRIVER 1
+
+			d. Add below line to ./drivers/net/meson.build, where PMDs are added to drivers list
+				'qdma',
+
+			e. To add Xilinx devices for device binding, add below lines to	./usertools/dpdk-devbind.py after cavium_pkx class, where PCI base class for devices are listed.
+				xilinx_qdma_pf = {'Class':  '05', 'Vendor': '10ee', 'Device': '9011,9111,9211,9311,9014,9114,9214,9314,9018,9118,9218,9318,901f,911f,921f,931f,9021,9121,9221,9321,9024,9124,9224,9324,9028,9128,9228,9328,902f,912f,922f,932f,9031,9131,9231,9331,9034,9134,9234,9334,9038,9138,9238,9338,903f,913f,923f,933f,9041,9141,9241,9341,9044,9144,9244,9344,9048,9148,9248,9348,b011,b111,b211,b311,b014,b114,b214,b314,b018,b118,b218,b318,b01f,b11f,b21f,b31f,b021,b121,b221,b321,b024,b124,b224,b324,b028,b128,b228,b328,b02f,b12f,b22f,b32f,b031,b131,b231,b331,b034,b134,b234,b334,b038,b138,b238,b338,b03f,b13f,b23f,b33f,b041,b141,b241,b341,b044,b144,b244,b344,b048,b148,b248,b348',
+				'SVendor': None, 'SDevice': None}
+				xilinx_qdma_vf = {'Class':  '05', 'Vendor': '10ee', 'Device': 'a011,a111,a211,a311,a014,a114,a214,a314,a018,a118,a218,a318,a01f,a11f,a21f,a31f,a021,a121,a221,a321,a024,a124,a224,a324,a028,a128,a228,a328,a02f,a12f,a22f,a32f,a031,a131,a231,a331,a034,a134,a234,a334,a038,a138,a238,a338,a03f,a13f,a23f,a33f,a041,a141,a241,a341,a044,a144,a244,a344,a048,a148,a248,a348,c011,c111,c211,c311,c014,c114,c214,c314,c018,c118,c218,c318,c01f,c11f,c21f,c31f,c021,c121,c221,c321,c024,c124,c224,c324,c028,c128,c228,c328,c02f,c12f,c22f,c32f,c031,c131,c231,c331,c034,c134,c234,c334,c038,c138,c238,c338,c03f,c13f,c23f,c33f,c041,c141,c241,c341,c044,c144,c244,c344,c048,c148,c248,c348',
+				'SVendor': None, 'SDevice': None}
+
+			d. Update entries in network devices class in ./usertools/dpdk-devbind.py to add Xilinx devices
+				network_devices = [network_class, cavium_pkx, xilinx_qdma_pf, xilinx_qdma_vf],
+
+2.) Setup: Host system
+
+DPDK requires that hugepages are setup on the server.
+The following modifications must be made to the /boot/grub/grub.cfg on the host system
+
+	i. Add hugepages for DPDK
+		- Add following parameter to /etc/default/grub file
+			GRUB_CMDLINE_LINUX="default_hugepagesz=1GB hugepagesz=1G hugepages=20"
+
+		This example adds 20 1GB hugepages, which are required to support 2048 queues, with descriptor ring of 1024 entries and each descriptor buffer length of 4KB. The number of hugepages required should be changed if the above configuration (queues, ring size, buffer size) changes.
+
+	ii. Enable IOMMU for VM testing
+		- Update /etc/default/grub file as below.
+			GRUB_CMDLINE_LINUX="default_hugepagesz=1GB hugepagesz=1G hugepages=20 iommu=pt intel_iommu=on"
+
+	iii. Execute the following command to modify the /boot/grub/grub.cfg with the configuration set in the above steps and permanently add them to the kernel command line.
+		update-grub
+
+	iv. Reboot host system after making the above modifications.
+
+3.) Setup: Build Commands
+
+	i. Compile DPDK & QDMA driver
+		a. Execute the following to compile and install the driver.
+			cd <server_dir>/<dpdk_test_area>/dpdk-stable
+			meson build
+			cd build
+			ninja
+			ninja install
+			ldconfig
+			
+		- The following should appear when ninja completes
+			Linking target app/test/dpdk-test.
+
+		- Verify that librte_net_qdma.a is installed in ./build/drivers directory.
+
+	ii. Execute the following to compile the igb_uio kernel driver.
+			cd <server_dir>/<dpdk_test_area>/dpdk-stable/dpdk-kmods/linux/igb_uio
+			make
+
+	Important Note for VF 4K queue support for CPM5 design only
+    -----------------------------------------------------------
+
+    To enable VF 4K queue driver support for CPM5 design, QDMA DPDK driver need
+    to compile by enabling the EQDMA_CPM5_VF_GT_256Q_SUPPORTED macro
+
+				cd <server_dir>/<dpdk_test_area>/dpdk-stable
+				meson build -DEQDMA_CPM5_VF_GT_256Q_SUPPORTED=1
+				cd build
+				ninja
+				ninja install
+				ldconfig
+
+4.) Compile Test application
+
+	i. Change to root user and compile the application
+		sudo su
+		cd examples/qdma_testapp
+		make RTE_SDK=`pwd`/../.. RTE_TARGET=build
+
+	- The following should appear when make completes
+			ln -sf qdma_testapp-shared build/qdma_testapp
+
+	ii. Additionally, for memory mapped mode, BRAM size can be configured with make command.
+	Default BRAM size is set to 512KB in the driver makefile.
+
+
+5.) Running the DPDK software test application
+
+The below steps describe the step by step procedure to run the DPDK QDMA test
+application and to interact with the QDMA PCIe device.
+
+	i. Navigate to examples/qdma_testapp directory.
+		cd <server_dir>/<dpdk_test_area>/dpdk-stable/examples/qdma_testapp
+
+	ii. Run the 'lspci' command on the console and verify that the PFs are detected as shown below. Here, '81' is the PCIe bus number on which Xilinx QDMA device is installed.
+		# lspci | grep Xilinx
+		81:00.0 Memory controller: Xilinx Corporation Device 903f
+		81:00.1 Memory controller: Xilinx Corporation Device 913f
+		81:00.2 Memory controller: Xilinx Corporation Device 923f
+		81:00.3 Memory controller: Xilinx Corporation Device 933f
+
+	iii. Execute the following commands required for running the DPDK application
+		# mkdir /mnt/huge
+		# mount -t hugetlbfs nodev /mnt/huge
+		# modprobe uio
+		# insmod <server_dir>/<dpdk_test_area>/dpdk-stable/dpdk-kmods/linux/igb_uio/igb_uio.ko
+
+	iv. Bind PF ports to the igb_uio module as shown below
+		# ../../usertools/dpdk-devbind.py -b igb_uio 81:00.0
+		# ../../usertools/dpdk-devbind.py -b igb_uio 81:00.1
+		# ../../usertools/dpdk-devbind.py -b igb_uio 81:00.2
+		# ../../usertools/dpdk-devbind.py -b igb_uio 81:00.3
+
+	v. The execution of steps iii and iv creates a max_vfs file entry in /sys/bus/pci/devices/0000:<bus>:<device>.<function>.
+
+	vi. Enable VFs for each PF by writing the number of VFs to enable to this file as shown below.
+		This example creates 1 VF for each PF.
+			# echo 1 > /sys/bus/pci/devices/0000\:81\:00.0/max_vfs
+			# echo 1 > /sys/bus/pci/devices/0000\:81\:00.1/max_vfs
+			# echo 1 > /sys/bus/pci/devices/0000\:81\:00.2/max_vfs
+			# echo 1 > /sys/bus/pci/devices/0000\:81\:00.3/max_vfs
+
+	vii. Run the lspci command on the console and verify that the VFs are listed in the output as shown below
+		# lspci | grep Xilinx
+		81:00.0 Memory controller: Xilinx Corporation Device 903f
+		81:00.1 Memory controller: Xilinx Corporation Device 913f
+		81:00.2 Memory controller: Xilinx Corporation Device 923f
+		81:00.3 Memory controller: Xilinx Corporation Device 933f
+		81:00.4 Memory controller: Xilinx Corporation Device a03f
+		81:08.4 Memory controller: Xilinx Corporation Device a13f
+		81:10.0 Memory controller: Xilinx Corporation Device a23f
+		81:17.4 Memory controller: Xilinx Corporation Device a33f
+
+	viii. Execute the following commands to bind the VF ports to igb_uio module
+		# ../../usertools/dpdk-devbind.py -b igb_uio 81:00.4
+		# ../../usertools/dpdk-devbind.py -b igb_uio 81:08.4
+		# ../../usertools/dpdk-devbind.py -b igb_uio 81:10.0
+		# ../../usertools/dpdk-devbind.py -b igb_uio 81:17.4
+
+	ix. Run the qdma_testapp using the following command
+		#./build/qdma_testapp -c 0xf -n 4
+			- '-c' represents processor mask
+			- '-n' represents number of memory channels
+
+CLI support in qdma_testapp
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Sample log of the qdma_testapp execution is given below.
+After running the qdma_testapp, command line prompt appears on the console as shown below.
+
+::
+
+	#./build/qdma_testapp -c 0xf -n 4
+	QDMA testapp rte eal init...
+	EAL: Detected 8 lcore(s)
+	EAL: Probing VFIO support...
+	EAL: PCI device 0000:81:00.0 on NUMA socket -1
+	EAL: probe driver: 10ee:903f net_qdma
+	EAL: PCI device 0000:81:00.1 on NUMA socket -1
+	EAL: probe driver: 10ee:913f net_qdma
+	EAL: PCI device 0000:81:00.2 on NUMA socket -1
+	EAL: probe driver: 10ee:923f net_qdma
+	EAL: PCI device 0000:81:00.3 on NUMA socket -1
+	EAL: probe driver: 10ee:933f net_qdma
+	EAL: PCI device 0000:81:00.4 on NUMA socket -1
+	EAL: probe driver: 10ee:a03f net_qdma
+	EAL: PCI device 0000:81:08.4 on NUMA socket -1
+	EAL: probe driver: 10ee:a13f net_qdma
+	EAL: PCI device 0000:81:10.0 on NUMA socket -1
+	EAL: probe driver: 10ee:a23f net_qdma
+	EAL: PCI device 0000:81:17.4 on NUMA socket -1
+	EAL: probe driver: 10ee:a33f net_qdma
+	Ethernet Device Count: 8
+	Logical Core Count: 4
+	xilinx-app>
+
+Commands supported by the qdma_testapp CLI
+++++++++++++++++++++++++++++++++++++++++++
+
+1. port_init
+
+	This command assigns queues to the port, sets up required resources for the queues, and prepares queues for data processing.
+	Format for this commad is:
+
+		port_init <port-id> <num-queues> <num-st-queues> <ring-depth> <pkt-buff-size>
+
+	port-id represents a logical numbering for PCIe functions in the order they are bind to igb_uio driver.
+	The first PCIe function that is bound has port id as 0.
+
+	num-queues represents the total number of queues to be assigned to the port
+
+	num-st-queues represents the total number of queues to be configured in streaming mode.
+	This implies that the (num-queues - num-st-queues) number of queues has to be configured in memory mapped mode.
+
+	ring-depth represents the number of entries in C2H and H2C descriptor rings of each queue of the port
+
+	pkt-buff-size represents the size of the data that a single C2H or H2C descriptor can support
+
+	Example usage:
+
+		port_init 1 32 16 1024 4096
+
+	This example initializes Port 1 with first 16 queues in streaming mode and remaining 16 queues in memory mapped mode.
+	Number of C2H and H2C descriptor ring depth is set to 1024 and data buffer of 4KB supported by each descriptor.
+
+2. port_close
+
+	This command frees up all the allocated resources and removes the queues associated with the port.
+	Format for this commad is:
+
+		port_close <port-id>
+
+	**port-id** represents a logical numbering for PCIe functions in the order they are bind to igb_uio driver.
+	The first PCIe function that is bound has port id as 0.
+
+	Example usage:
+
+	::
+
+		port_close 0
+
+	This example closes the port 0. Port 0 can again be re-initialized with `port_init` command after `port_close` command.
+
+3. port_reset
+
+	This command resets the DPDK port. This command is supported for VF port only.
+	This command closes the port and re-initializes it with the values provided in this command.
+	Format for this commad is:
+
+		port_reset <port-id> <num-queues> <num-st-queues> <ring-depth> <pkt-buff-size>
+
+	port-id represents a logical numbering for PCIe functions in the order they are bind to igb_uio driver.
+	The first PCIe function that is bound has port id as 0.
+
+	num-queues represents the total number of queues to be assigned to the port
+
+	num-st-queues represents the total number of queues to be configured in streaming mode.
+	This implies that the (num-queues - num-st-queues) number of queues has to be configured in memory mapped mode.
+
+	ring-depth represents the number of entries in C2H and H2C descriptor rings of each queue of the port
+
+	pkt-buff-size represents the size of the data that a single C2H or H2C descriptor can support
+
+	Example usage:
+
+		port_reset 4 32 16 1024 4096
+
+	This example command resets the port 4 and re-initializes it with first 16 queues in streaming mode and
+	remaining 16 queues in memory mapped mode. Number of C2H and H2C descriptor ring depth is set to 1024
+	and data buffer of 4KB supported by each descriptor.
+
+4. port_remove
+
+	This command frees up all the resources allocated for the port and removes the port from application use.
+	User will need to restart the application to use the port again.
+	Format for this commad is:
+
+		port_remove <port-id>
+
+	port-id represents a logical numbering for PCIe functions in the order they are bind to igb_uio driver.
+	The first PCIe function that is bound has port id as 0.
+
+	Example usage:
+
+		port_remove 4
+
+	This example removes the port 4. Restart the application to use port 4 again.
+
+5. dma_to_device
+
+	This command is used to DMA the data from host to card.
+	Format for this commad is:
+
+		dma_to_device <port-id> <num-queues> <input-filename> <dst-addr> <size> <iterations>
+
+	port-id represents a logical numbering for PCIe functions in the order they are bind to igb_uio driver.
+	The first PCIe function that is bound has port id as 0.
+
+	num-queues represents the total number of queues to use for transmitting the data
+
+	input-filename represents the path to a valid binary data file, contents of which needs to be DMA'ed
+
+	dst-addr represents the destination address (offset) in the card to where DMA should be done in memory mapped mode.
+	This field is ignored for streaming mode queues.
+
+	size represents the amount of data in bytes that needs to be transmitted to the card from the given input file.
+	Data will be segmented across queues such that the total data transferred to the card is `size` amount
+
+	iterations represents the number of loops to repeat the same DMA transfer
+
+	Example usage:
+
+		dma_to_device 0 2048 mm_datafile_1MB.bin 0 524288 0
+
+	This example segments the (524288) bytes from the mm_datafile_1MB.bin file equally to 2048 queues
+	and transmits the segmented data on each queue starting at destination BRAM offset 0 for 1st queue,
+	offset (1*524288)/2048 for 2nd queue, and so on.
+
+6. dma_from_device
+
+	This command is used to DMA the data from card to host.
+	Format for this commad is:
+
+		dma_from_device <port-id> <num-queues> <output-filename> <src-addr> <size> <iterations>
+
+	port-id represents a logical numbering for PCIe functions in the order they are bind to igb_uio driver.
+	The first PCIe function that is bound has port id as 0.
+
+	num-queues represents the total number of queues to use to receive the data
+
+	output-filename represents the path to output file to dump the received data
+
+	src-addr represents the source address (offset) in the card from where DMA should be done in memory mapped mode.
+	This field is ignored for streaming mode queues.
+
+	size represents the amount of data in bytes that needs to be received from the card.
+	Data will be segmented across queues such that the total data transferred from the card is `size` amount
+
+	iterations represents the number of loops to repeat the same DMA transfer
+
+	Example usage:
+
+		dma_from_device 0 2048 port0_qcount2048_size524288.bin 0 524288 0
+
+	This example receives 524288 bytes from 2048 queues and writes to port0_qcount2048_size524288.bin file.
+	1st queue receives (524288/2048) bytes of data from BRAM offset 0,
+	2nd queue receives (524288/2048) bytes of data from BRAM offset (1*524288)/2048, and so on.
+
+7. reg_read
+
+	This command is used to read the specified register.
+	Format for this commad is:
+
+		reg_read <port-id> <bar-num> <address>
+
+	port-id represents a logical numbering for PCIe functions in the order they are bind to igb_uio driver.
+	The first PCIe function that is bound has port id as 0.
+
+	bar-num represents the PCIe BAR where the register is located
+
+	address represents offset of the register in the PCIe BAR `bar-num`
+
+8. reg_write
+
+	This command is used to write a 32-bit value to the specified register.
+	Format for this commad is:
+
+		reg_write <port-id> <bar-num> <address> <value>
+
+	port-id represents a logical numbering for PCIe functions in the order they are bind to igb_uio driver.
+	The first PCIe function that is bound has port id as 0.
+
+	bar-num represents the PCIe BAR where the register is located
+
+	address represents offset of the register in the PCIe BAR `bar-num`
+
+	value represents the value to be written at the register offset `address`
+
+9. reg_dump
+
+	This command dumps important QDMA registers values of the given port on console.
+	Format for this commad is:
+
+		reg_dump <port-id>
+
+	port-id represents a logical numbering for PCIe functions in the order they are bind to igb_uio driver.
+	The first PCIe function that is bound has port id as 0.
+
+10. reg_info_read
+
+	This command reads the field info for the specified number of registers of the given port on console.
+	Format for this commad is:
+
+		reg_info_read <port-id> <reg-addr> <num-regs>
+
+	port-id represents a logical numbering for PCIe functions in the order they are bind to igb_uio driver.
+	The first PCIe function that is bound has port id as 0.
+
+	reg-addr represents offset of the register in the PCIe BAR bar-num
+
+	rum-regs represents number of registers to read
+
+11. queue_dump
+
+	This command dumps the queue context of the specified queue number of the given port.
+	Format for this commad is:
+
+		queue_dump <port-id> <queue-id>
+
+	port-id represents a logical numbering for PCIe functions in the order they are bind to igb_uio driver.
+	The first PCIe function that is bound has port id as 0.
+
+	queue-id represents the queue number relative to the port, whose context information needs to be logged
+
+12. desc_dump
+
+	This command dumps the descriptors of the C2H and H2C rings of the specified queue number of the given port.
+	Format for this commad is:
+
+		desc_dump <port-id> <queue-id>
+
+	port-id represents a logical numbering for PCIe functions in the order they are bind to igb_uio driver.
+	The first PCIe function that is bound has port id as 0.
+
+	queue-id represents the queue number relative to the port, whose C2H and H2C ring descriptors needs to be dumped
+
+13. load_cmds
+
+	This command executes the list of CLI commands from the given file.
+	Format for this commad is:
+
+		load_cmds <file_name>
+
+	file_name represents path to a valid file containing list of above described CLI commands to be executed in sequence.
+
+14. help
+
+	This command dumps the help menu with supported commands and their format.
+	Format for this commad is:
+
+		help
+
+15. ctrl+d
+
+	The keyboard keys Ctrl and D when pressed together quits the application.
+
+
+
+
+
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017-2022 Xilinx, Inc. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of the copyright holder nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+

QDMA/DPDK/drivers/net/qdma/qdma_access/eqdma_cpm5_access/eqdma_cpm5_access.c

@@ -1462,6 +1462,15 @@ static struct eqdma_cpm5_hw_err_info
 		GLBL_ERR_STAT_ERR_H2C_MM_0_MASK,
 		&eqdma_cpm5_mm_h2c0_err_process
 	},
+	{
+		EQDMA_CPM5_MM_H2C0_RD_HDR_ADR_ERR,
+		"MM H2C0 Read cmpt hdr address mismatch Error",
+		EQDMA_CPM5_H2C_MM_ERR_CODE_ENABLE_MASK_ADDR,
+		EQDMA_CPM5_H2C_MM_STATUS_ADDR,
+		H2C_MM_ERR_CODE_ENABLE_RD_HDR_ADR_ERR_MASK,
+		GLBL_ERR_STAT_ERR_H2C_MM_0_MASK,
+		&eqdma_cpm5_mm_h2c0_err_process
+	},
 	{
 		EQDMA_CPM5_MM_H2C0_RD_FLR_ERR,
 		"MM H2C0 Read flr Error",

QDMA/DPDK/drivers/net/qdma/qdma_access/eqdma_cpm5_access/eqdma_cpm5_access.h

@@ -233,11 +233,16 @@ struct eqdma_cpm5_hw_err_info {
 	void (*eqdma_cpm5_hw_err_process)(void *dev_hndl);
 };
 
+#ifdef EQDMA_CPM5_VF_GT_256Q_SUPPORTED
+#define EQDMA_CPM5_OFFSET_VF_VERSION          0x21014
+#define EQDMA_CPM5_OFFSET_MBOX_BASE_VF        0x21000
+#else
 #define EQDMA_CPM5_OFFSET_VF_VERSION           0x5014
-#define EQDMA_CPM5_OFFSET_VF_USER_BAR         0x5018
+#define EQDMA_CPM5_OFFSET_MBOX_BASE_VF         0x5000
+#endif
 
 #define EQDMA_CPM5_OFFSET_MBOX_BASE_PF         0x42400
-#define EQDMA_CPM5_OFFSET_MBOX_BASE_VF         0x5000
+#define EQDMA_CPM5_OFFSET_VF_USER_BAR          0x5018
 
 #define EQDMA_CPM5_COMPL_CTXT_BADDR_HIGH_H_MASK         GENMASK_ULL(63, 38)
 #define EQDMA_CPM5_COMPL_CTXT_BADDR_HIGH_L_MASK         GENMASK_ULL(37, 6)

QDMA/DPDK/drivers/net/qdma/qdma_access/eqdma_soft_access/eqdma_soft_access.c

@@ -1458,6 +1458,15 @@ static struct eqdma_hw_err_info eqdma_err_info[EQDMA_ERRS_ALL] = {
 		GLBL_ERR_STAT_ERR_H2C_MM_0_MASK,
 		&eqdma_mm_h2c0_err_process
 	},
+	{
+		EQDMA_MM_H2C0_RD_HDR_ADR_ERR,
+		"MM H2C0 Read cmpt hdr address mismatch Error",
+		EQDMA_H2C_MM_ERR_CODE_ENABLE_MASK_ADDR,
+		EQDMA_H2C_MM_STATUS_ADDR,
+		H2C_MM_ERR_CODE_ENABLE_RD_HDR_ADR_ERR_MASK,
+		GLBL_ERR_STAT_ERR_H2C_MM_0_MASK,
+		&eqdma_mm_h2c0_err_process
+	},
 	{
 		EQDMA_MM_H2C0_RD_FLR_ERR,
 		"MM H2C0 Read flr Error",

QDMA/DPDK/drivers/net/qdma/qdma_access/qdma_access_common.c

@@ -34,9 +34,9 @@
 #include "qdma_platform.h"
 #include "qdma_soft_reg.h"
 #include "qdma_soft_access.h"
-#include "qdma_cpm4_access.h"
+#include "qdma_cpm4_access/qdma_cpm4_access.h"
 #include "eqdma_soft_access.h"
-#include "eqdma_cpm5_access.h"
+#include "eqdma_cpm5_access/eqdma_cpm5_access.h"
 #include "qdma_reg_dump.h"
 
 #ifdef ENABLE_WPP_TRACING
@@ -52,7 +52,8 @@
  */
 enum qdma_ip {
 	QDMA_OR_VERSAL_IP,
-	EQDMA_IP
+	EQDMA_IP,
+	EQDMA_CPM5_IP
 };
 
 
@@ -575,8 +576,14 @@ static int qdma_is_config_bar(void *dev_hndl, uint8_t is_vf, enum qdma_ip *ip)
 		if (FIELD_GET(QDMA_GLBL2_VF_UNIQUE_ID_MASK, reg_val)
 				!= QDMA_MAGIC_NUMBER) {
 			/* Its either QDMA or Versal */
+
+#ifdef EQDMA_CPM5_VF_GT_256Q_SUPPORTED
+			*ip = EQDMA_CPM5_IP;
+			reg_addr = EQDMA_CPM5_OFFSET_VF_VERSION;
+#else
 			*ip = EQDMA_IP;
 			reg_addr = EQDMA_OFFSET_VF_VERSION;
+#endif
 			reg_val = qdma_reg_read(dev_hndl, reg_addr);
 		} else {
 			*ip = QDMA_OR_VERSAL_IP;
@@ -1282,8 +1289,11 @@ int qdma_hw_access_init(void *dev_hndl, uint8_t is_vf,
 
 	if (ip == EQDMA_IP)
 		hw_access->qdma_get_version = &eqdma_get_version;
+	else if (ip == EQDMA_CPM5_IP)
+		hw_access->qdma_get_version = &eqdma_cpm5_get_version;
 	else
 		hw_access->qdma_get_version = &qdma_get_version;
+
 	hw_access->qdma_init_ctxt_memory = &qdma_init_ctxt_memory;
 	hw_access->qdma_fmap_conf = &qdma_fmap_conf;
 	hw_access->qdma_sw_ctx_conf = &qdma_sw_ctx_conf;

QDMA/DPDK/drivers/net/qdma/qdma_access/qdma_access_version.h

@@ -36,7 +36,7 @@
 
 #define QDMA_VERSION_MAJOR	2022
 #define QDMA_VERSION_MINOR	1
-#define QDMA_VERSION_PATCH	0
+#define QDMA_VERSION_PATCH	2
 
 #define QDMA_VERSION_STR	\
 	__stringify(QDMA_VERSION_MAJOR) "." \

QDMA/DPDK/drivers/net/qdma/version.h

@@ -38,7 +38,7 @@
 
 #define QDMA_PMD_MAJOR		2022
 #define QDMA_PMD_MINOR		1
-#define QDMA_PMD_PATCHLEVEL	0
+#define QDMA_PMD_PATCHLEVEL	1
 
 #define QDMA_PMD_VERSION      \
 	qdma_stringify(QDMA_PMD_MAJOR) "." \