Skip to content

O
OpenXG-RAN
Commit cf0a1d6d authored by Thomas Schlichter's avatar Thomas Schlichter
Browse files
Options

update conf files for NTN LEO scenario 

Also added a dedicated conf file for NTN LEO, that can be used for CI.
parent 3fce7688
Hide whitespace changes
Inline Side-by-side
Showing with 352 additions and 12 deletions
ci-scripts/conf_files/gnb.sa.band66.ntn.25prb.rfsim.conf
View file @ cf0a1d6d
......@@ -148,7 +148,7 @@ gNBs =
#ext2
#ntn_Config_r17
cellSpecificKoffset_r17 = 478;
ta-Common-r17 = 29314900;
ta-Common-r17 = 29314900; # 119.37 ms
positionX-r17 = 0;
positionY-r17 = 0;
positionZ-r17 = 32433846;
......@@ -196,8 +196,11 @@ MACRLCs = (
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
# ulsch_max_frame_inactivity = 0;
pusch_TargetSNRx10 = 150;
pucch_TargetSNRx10 = 200;
dl_max_mcs = 9;
ul_max_mcs = 9;
}
);
......@@ -205,7 +208,7 @@ L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
prach_dtx_threshold = 150;
pucch0_dtx_threshold = 150;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
......@@ -244,7 +247,7 @@ rfsimulator :
serveraddr = "server";
serverport = 4043;
options = (); #("saviq"); or/and "chanmod"
modelname = "AWGN";
prop_delay = 238.74;
IQfile = "/tmp/rfsimulator.iqs";
};
......@@ -277,4 +280,3 @@ log_config :
ngap_log_level ="debug";
f1ap_log_level ="debug";
};
ci-scripts/conf_files/gnb.sa.band66.ntn.leo.25prb.rfsim.conf 0 → 100644
View file @ cf0a1d6d
Active_gNBs = ( "5G-GOA-gNB");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "5G-GOA-gNB";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 208; mnc = 99; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
nr_cellid = 12345678L;
////////// Physical parameters:
sib1_tda = 5;
min_rxtxtime = 6;
num_dlharq = 32;
num_ulharq = 32;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 2150.43 MHz + 14 PRBs@15kHz SCS (same as initial BWP), points to Subcarrier 0 of RB#10 of SSB block
absoluteFrequencySSB = 430590;
dl_frequencyBand = 66;
# this is 2150.43 MHz
dl_absoluteFrequencyPointA = 430086;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 0;
dl_carrierBandwidth = 25;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=25 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 6600;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 0;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 2;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 66;
# this is 1750.43 MHz
ul_absoluteFrequencyPointA = 350086;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 0;
ul_carrierBandwidth = 25;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 6600;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 0;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -118;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 0;
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0;
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 0;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 0;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
#ext2
#ntn_Config_r17
cellSpecificKoffset_r17 = 40;
ta-Common-r17 = 2317000; # 9.435 ms
ta-CommonDrift-r17 = -230000; # -46 µs/s
positionX-r17 = 0;
positionY-r17 = -2166908; # -2816980.4 m
positionZ-r17 = 4910784; # 6384019.2 m
velocityVX-r17 = 0;
velocityVY-r17 = 115246; # 6914.76 m/s
velocityVZ-r17 = 50853; # 3051.18 m/s
}
);
TIMERS :
{
sr_ProhibitTimer = 0;
sr_TransMax = 64;
sr_ProhibitTimer_v1700 = 512;
t300 = 2000;
t301 = 2000;
t319 = 2000;
};
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ({ ipv4 = "192.168.71.132"; });
NETWORK_INTERFACES :
{
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.71.140/26";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.71.140/26";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
# ulsch_max_frame_inactivity = 0;
pusch_TargetSNRx10 = 150;
pucch_TargetSNRx10 = 200;
dl_max_mcs = 9;
ul_max_mcs = 9;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 150;
pucch0_dtx_threshold = 150;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
RUs = (
{
local_rf = "yes";
nb_tx = 1;
nb_rx = 1;
att_tx = 0;
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
sf_extension = 0;
eNB_instances = [0];
sdr_addrs = "type=x300";
clock_src = "internal";
# if_freq = 3700000000L;
# if_offset = 1000000;
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_DISABLE";
}
);
rfsimulator :
{
serveraddr = "server";
serverport = 4043;
options = ("chanmod"); #("saviq"); or/and "chanmod"
prop_delay = 20;
IQfile = "/tmp/rfsimulator.iqs";
};
channelmod = {
max_chan=10;
modellist="modellist_rfsimu_1";
modellist_rfsimu_1 = (
{
model_name = "rfsimu_channel_enB0"
type = "SAT_LEO_TRANS";
noise_power_dB = -100;
},
{
model_name = "rfsimu_channel_ue0"
type = "SAT_LEO_TRANS";
noise_power_dB = -100;
}
);
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
ngap_log_level ="debug";
f1ap_log_level ="debug";
};
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band66.fr1.24PRB.usrpx300.conf
View file @ cf0a1d6d
......@@ -35,6 +35,8 @@ gNBs =
sib1_tda = 5;
min_rxtxtime = 6;
# disable_harq = 1;
# num_dlharq = 32;
# num_ulharq = 32;
servingCellConfigCommon = (
{
......@@ -163,8 +165,25 @@ gNBs =
#ext2
#ntn_Config_r17
# cellSpecificKoffset_r17 = 478; # GEO satellite
# cellSpecificKoffset_r17 = 40; # LEO satellite
# GEO satellite
# cellSpecificKoffset_r17 = 478;
# ta-Common-r17 = 29314900; # 119.37 ms
# positionX-r17 = 0;
# positionY-r17 = 0;
# positionZ-r17 = 32433846;
# velocityVX-r17 = 0;
# velocityVY-r17 = 0;
# velocityVZ-r17 = 0;
# LEO satellite
# cellSpecificKoffset_r17 = 40;
# ta-Common-r17 = 2317000; # 9.435 ms
# ta-CommonDrift-r17 = -230000; # -46 µs/s
# positionX-r17 = 0;
# positionY-r17 = -2166908; # -2816980.4 m
# positionZ-r17 = 4910784; # 6384019.2 m
# velocityVX-r17 = 0;
# velocityVY-r17 = 115246; # 6914.76 m/s
# velocityVZ-r17 = 50853; # 3051.18 m/s
}
);
......@@ -208,6 +227,8 @@ MACRLCs = (
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 150;
pucch_TargetSNRx10 = 200;
# dl_max_mcs = 9;
# ul_max_mcs = 9;
}
);
......@@ -215,7 +236,7 @@ L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
prach_dtx_threshold = 150;
pucch0_dtx_threshold = 150;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
......
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band66.fr1.25PRB.usrpx300.conf
View file @ cf0a1d6d
......@@ -35,6 +35,8 @@ gNBs =
sib1_tda = 5;
min_rxtxtime = 6;
# disable_harq = 1;
# num_dlharq = 32;
# num_ulharq = 32;
servingCellConfigCommon = (
{
......@@ -163,15 +165,25 @@ gNBs =
#ext2
#ntn_Config_r17
# cellSpecificKoffset_r17 = 478; # GEO satellite
# cellSpecificKoffset_r17 = 40; # LEO satellite
# ta-Common-r17 = 29314900;
# GEO satellite
# cellSpecificKoffset_r17 = 478;
# ta-Common-r17 = 29314900; # 119.37 ms
# positionX-r17 = 0;
# positionY-r17 = 0;
# positionZ-r17 = 32433846;
# velocityVX-r17 = 0;
# velocityVY-r17 = 0;
# velocityVZ-r17 = 0;
# LEO satellite
# cellSpecificKoffset_r17 = 40;
# ta-Common-r17 = 2317000; # 9.435 ms
# ta-CommonDrift-r17 = -230000; # -46 µs/s
# positionX-r17 = 0;
# positionY-r17 = -2166908; # -2816980.4 m
# positionZ-r17 = 4910784; # 6384019.2 m
# velocityVX-r17 = 0;
# velocityVY-r17 = 115246; # 6914.76 m/s
# velocityVZ-r17 = 50853; # 3051.18 m/s
}
);
......@@ -215,6 +227,8 @@ MACRLCs = (
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 150;
pucch_TargetSNRx10 = 200;
# dl_max_mcs = 9;
# ul_max_mcs = 9;
}
);
......@@ -222,7 +236,7 @@ L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
prach_dtx_threshold = 150;
pucch0_dtx_threshold = 150;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
......
targets/PROJECTS/GENERIC-NR-5GC/CONF/ue.conf
View file @ cf0a1d6d
......@@ -11,4 +11,6 @@ position0 = {
x = 0.0;
y = 0.0;
z = 6377900.0;
}
\ No newline at end of file
}
@include "channelmod_rfsimu_LEO_satellite.conf"
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment