printf("\t\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure0)-> format_found is %d \n",*format_found);
#endif
#endif
// if (mode == NO_DCI) {
//if (mode == NO_DCI) {
// #ifdef NR_PDCCH_DCI_DEBUG
// #ifdef NR_PDCCH_DCI_DEBUG
// printf("\t\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure0)-> skip DCI decoding: expect no DCIs at nr_tti_rx %d in current searchSpace\n", nr_tti_rx);
// printf("\t\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure0)-> skip DCI decoding: expect no DCIs at nr_tti_rx %d in current searchSpace\n", nr_tti_rx);
// In the next code line there is maybe a bug. The spec is not comparing Table 10.1-2 with nb_candidates, but with total number of candidates for all s and all p
// In the next code line there is maybe a bug. The spec is not comparing Table 10.1-2 with nb_candidates, but with total number of candidates for all s and all p
* Formats 0_1, not completely implemented. See (*)
* Formats 0_1, not completely implemented. See (*)
*/
*/
// format {0_0,0_1,1_0,1_1,2_0,2_1,2_2,2_3} according to 38.212 Section 7.3.1
// format {0_0,0_1,1_0,1_1,2_0,2_1,2_2,2_3} according to 38.212 Section 7.3.1
/*#define NBR_NR_FORMATS 8
/*
#define NBR_NR_DCI FIELDS 48
#define NBR_NR_FORMATS 8
#define CARRIER_IND 0
#define NBR_NR_DCI_FIELDS 56
#define SUL_IND_0_1 1
#define IDENTIFIER_DCI_FORMATS 2
#define IDENTIFIER_DCI_FORMATS 0
#define CARRIER_IND 1
#define SUL_IND_0_1 2
#define SLOT_FORMAT_IND 3
#define SLOT_FORMAT_IND 3
#define PRE_EMPTION_IND 4
#define PRE_EMPTION_IND 4
#define TPC_CMD_NUMBER 5
#define TPC_CMD_NUMBER 5
#define BLOCK_NUMBER 6
#define BLOCK_NUMBER 6
#define BANDWIDTH_PART_IND 7
#define BANDWIDTH_PART_IND 7
#define FREQ_DOM_RESOURCE_ASSIGNMENT_UL 8
#define SHORT_MESSAGE_IND 8
#define FREQ_DOM_RESOURCE_ASSIGNMENT_DL 9
#define SHORT_MESSAGES 9
#define TIME_DOM_RESOURCE_ASSIGNMENT 10
#define FREQ_DOM_RESOURCE_ASSIGNMENT_UL 10
#define VRB_TO_PRB_MAPPING 11
#define FREQ_DOM_RESOURCE_ASSIGNMENT_DL 11
#define PRB_BUNDLING_SIZE_IND 12
#define TIME_DOM_RESOURCE_ASSIGNMENT 12
#define RATE_MATCHING_IND 13
#define VRB_TO_PRB_MAPPING 13
#define ZP_CSI_RS_TRIGGER 14
#define PRB_BUNDLING_SIZE_IND 14
#define FREQ_HOPPING_FLAG 15
#define RATE_MATCHING_IND 15
#define TB1_MCS 16
#define ZP_CSI_RS_TRIGGER 16
#define TB1_NDI 17
#define FREQ_HOPPING_FLAG 17
#define TB1_RV 18
#define TB1_MCS 18
#define TB2_MCS 19
#define TB1_NDI 19
#define TB2_NDI 20
#define TB1_RV 20
#define TB2_RV 21
#define TB2_MCS 21
#define MCS 22
#define TB2_NDI 22
#define NDI 23
#define TB2_RV 23
#define RV 24
#define MCS 24
#define HARQ_PROCESS_NUMBER 25
#define NDI 25
#define DAI 26
#define RV 26
#define FIRST_DAI 27
#define HARQ_PROCESS_NUMBER 27
#define SECOND_DAI 28
#define DAI_ 28
#define TPC_PUSCH 29
#define FIRST_DAI 29
#define TPC_PUCCH 30
#define SECOND_DAI 30
#define PUCCH_RESOURCE_IND 31
#define TB_SCALING 31
#define PDSCH_TO_HARQ_FEEDBACK_TIME_IND 32
#define TPC_PUSCH 32
#define SHORT_MESSAGE_IND 33
#define TPC_PUCCH 33
#define SRS_RESOURCE_IND 34
#define PUCCH_RESOURCE_IND 34
#define PRECOD_NBR_LAYERS 35
#define PDSCH_TO_HARQ_FEEDBACK_TIME_IND 35
#define ANTENNA_PORTS 36
//#define SHORT_MESSAGE_IND 33
#define TCI 37
#define SRS_RESOURCE_IND 36
#define SRS_REQUEST 38
#define PRECOD_NBR_LAYERS 37
#define TPC_CMD_NUMBER_FORMAT2_3 39
#define ANTENNA_PORTS 38
#define CSI_REQUEST 40
#define TCI 39
#define CBGTI 41
#define SRS_REQUEST 40
#define CBGFI 42
#define TPC_CMD_NUMBER_FORMAT2_3 41
#define PTRS_DMRS 43
#define CSI_REQUEST 42
#define BETA_OFFSET_IND 44
#define CBGTI 43
#define DMRS_SEQ_INI 45
#define CBGFI 44
#define SUL_IND_0_0 46
#define PTRS_DMRS 45
#define PADDING 47*/
#define BETA_OFFSET_IND 46
#define DMRS_SEQ_INI 47
#define UL_SCH_IND 48
#define PADDING_NR_DCI 49
#define SUL_IND_0_0 50
#define RA_PREAMBLE_INDEX 51
#define SUL_IND_1_0 52
#define SS_PBCH_INDEX 53
#define PRACH_MASK_INDEX 54
#define RESERVED_NR_DCI 55
*/
//uint8_t pusch_alloc_list=1;
//uint8_t pusch_alloc_list=1;
uint8_tn_zp=1;// number of ZP CSI-RS resource sets in the higher layer parameter [ZP-CSI-RS-ResourceConfigList].
// number of ZP CSI-RS resource sets in the higher layer parameter [ZP-CSI-RS-ResourceConfigList]
uint8_tn_zp=1;
uint8_tn_SRS=1;
uint8_tn_SRS=1;
// for PUSCH hopping with resource allocation type 1
// n_UL_hopping = 1 if the higher layer parameter frequencyHoppingOffsetLists contains two offset values
// n_UL_hopping = 2 if the higher layer parameter frequencyHoppingOffsetLists contains four offset values
uint8_tn_UL_hopping=0;
uint8_tdci_field_size_table[NBR_NR_DCI_FIELDS][NBR_NR_FORMATS]={// This table contains the number of bits for each field (row) contained in each dci format (column).
uint8_tdci_field_size_table[NBR_NR_DCI_FIELDS][NBR_NR_FORMATS]={// This table contains the number of bits for each field (row) contained in each dci format (column).
// The values of the variables indicate field sizes in number of bits
// The values of the variables indicate field sizes in number of bits
{0,3,0,3,0,0,0,0},// 1 CARRIER_IND: 0 or 3 bits, as defined in Subclause x.x of [5, TS38.213]
{0,0,0,0,0,0,0,0},// 2 SUL_IND_0_1:
{0,0,0,0,1,0,0,0},// 3 SLOT_FORMAT_IND: size of DCI format 2_0 is configurable by higher layers up to 128 bits, according to Subclause 11.1.1 of [5, TS 38.213]
{0,0,0,0,1,0,0,0},// 3 SLOT_FORMAT_IND: size of DCI format 2_0 is configurable by higher layers up to 128 bits, according to Subclause 11.1.1 of [5, TS 38.213]
{0,0,0,0,0,1,0,0},// 4 PRE_EMPTION_IND: size of DCI format 2_1 is configurable by higher layers up to 126 bits, according to Subclause 11.2 of [5, TS 38.213]. Each pre-emption indication is 14 bits
{0,0,0,0,0,1,0,0},// 4 PRE_EMPTION_IND: size of DCI format 2_1 is configurable by higher layers up to 126 bits, according to Subclause 11.2 of [5, TS 38.213]. Each pre-emption indication is 14 bits
{0,0,0,0,0,0,1,0},// 5 TPC_CMD_NUMBER: The parameter xxx provided by higher layers determines the index to the TPC command number for an UL of a cell. Each TPC command number is 2 bits
{0,0,0,0,0,0,1,0},// 5 TPC_CMD_NUMBER: The parameter xxx provided by higher layers determines the index to the TPC command number for an UL of a cell. Each TPC command number is 2 bits
{0,0,0,0,0,0,0,1},// 6 BLOCK_NUMBER: starting position of a block is determined by the parameter startingBitOfFormat2_3
{0,0,0,0,0,0,0,1},// 6 BLOCK_NUMBER: starting position of a block is determined by the parameter startingBitOfFormat2_3
{ceil(log2(n_RB_ULBWP*(n_RB_ULBWP+1)/2)),ceil(log2(n_RB_ULBWP*(n_RB_ULBWP+1)/2)),0,0,0,0,0,0},// 8 FREQ_DOM_RESOURCE_ASSIGNMENT_UL: PUSCH hopping with resource allocation type 1 not considered
{0,0,((crc_scrambled==_p_rnti)?2:0),
0,0,0,0,0},// 8 SHORT_MESSAGE_IND 2 bits if crc scrambled with P-RNTI
{0,0,((crc_scrambled==_p_rnti)?8:0),
0,0,0,0,0},// 9 SHORT_MESSAGES 8 bit8 if crc scrambled with P-RNTI
{log2(pusch_alloc_list),log2(pusch_alloc_list),log2(pusch_alloc_list),log2(pusch_alloc_list),0,0,0,0},// 10 TIME_DOM_RESOURCE_ASSIGNMENT: 0, 1, 2, 3, or 4 bits as defined in Subclause 6.1.2.1 of [6, TS 38.214]. The bitwidth for this field is determined as log2(I) bits,
ceil(log2(n_RB_DLBWP*(n_RB_DLBWP+1)/2)),
0,0,0,0},// 11 FREQ_DOM_RESOURCE_ASSIGNMENT_DL:
{4,log2(pusch_alloc_list),4,log2(pusch_alloc_list),0,0,0,0},// 12 TIME_DOM_RESOURCE_ASSIGNMENT: 0, 1, 2, 3, or 4 bits as defined in Subclause 6.1.2.1 of [6, TS 38.214]. The bitwidth for this field is determined as log2(I) bits,
// where I the number of entries in the higher layer parameter pusch-AllocationList
// where I the number of entries in the higher layer parameter pusch-AllocationList
{0,1,1,1,0,0,0,0},// 11 VRB_TO_PRB_MAPPING: 0 bit if only resource allocation type 0
{0,1,1,1,0,0,0,0},// 13 VRB_TO_PRB_MAPPING: 0 bit if only resource allocation type 0
{0,0,0,1,0,0,0,0},// 12 PRB_BUNDLING_SIZE_IND:0 bit if the higher layer parameter PRB_bundling is not configured or is set to 'static', or 1 bit if the higher layer parameter PRB_bundling is set to 'dynamic' according to Subclause 5.1.2.3 of [6, TS 38.214]
{0,0,0,1,0,0,0,0},// 14 PRB_BUNDLING_SIZE_IND:0 bit if the higher layer parameter PRB_bundling is not configured or is set to 'static', or 1 bit if the higher layer parameter PRB_bundling is set to 'dynamic' according to Subclause 5.1.2.3 of [6, TS 38.214]
{0,0,0,2,0,0,0,0},// 13 RATE_MATCHING_IND: 0, 1, or 2 bits according to higher layer parameter rate-match-PDSCH-resource-set
{0,0,0,2,0,0,0,0},// 15 RATE_MATCHING_IND: 0, 1, or 2 bits according to higher layer parameter rate-match-PDSCH-resource-set
{0,0,2,4,0,0,0,0},// 26 DAI: For format1_1: 4 if more than one serving cell are configured in the DL and the higher layer parameter HARQ-ACK-codebook=dynamic, where the 2 MSB bits are the counter DAI and the 2 LSB bits are the total DAI
{0,0,(crc_scrambled==_c_rnti)?2:0,2,0,0,0,0},// 28 DAI: For format1_1: 4 if more than one serving cell are configured in the DL and the higher layer parameter HARQ-ACK-codebook=dynamic, where the 2 MSB bits are the counter DAI and the 2 LSB bits are the total DAI
// 2 if one serving cell is configured in the DL and the higher layer parameter HARQ-ACK-codebook=dynamic, where the 2 bits are the counter DAI
// 2 if one serving cell is configured in the DL and the higher layer parameter HARQ-ACK-codebook=dynamic, where the 2 bits are the counter DAI
// 0 otherwise
// 0 otherwise
{0,2,0,0,0,0,0,0},// 27 FIRST_DAI: (1 or 2 bits) 1 bit for semi-static HARQ-ACK // 2 bits for dynamic HARQ-ACK codebook with single HARQ-ACK codebook
{0,2,0,0,0,0,0,0},// 29 FIRST_DAI: (1 or 2 bits) 1 bit for semi-static HARQ-ACK // 2 bits for dynamic HARQ-ACK codebook with single HARQ-ACK codebook
{0,2,0,0,0,0,0,0},// 28 SECOND_DAI: (0 or 2 bits) 2 bits for dynamic HARQ-ACK codebook with two HARQ-ACK sub-codebooks // 0 bits otherwise
{0,2,0,0,0,0,0,0},// 30 SECOND_DAI: (0 or 2 bits) 2 bits for dynamic HARQ-ACK codebook with two HARQ-ACK sub-codebooks // 0 bits otherwise
{0,0,0,3,0,0,0,0},// 37 TCI: 0 bit if higher layer parameter tci-PresentInDCI is not enabled; otherwise 3 bits
{0,0,0,3,0,0,0,0},// 39 TCI: 0 bit if higher layer parameter tci-PresentInDCI is not enabled; otherwise 3 bits
{0,3,0,0,0,0,0,2},// 38 SRS_REQUEST:
{0,3,0,0,0,0,0,2},// 40 SRS_REQUEST:
{0,0,0,0,0,0,0,2},// 39 TPC_CMD_NUMBER_FORMAT2_3:
{0,0,0,0,0,0,0,2},// 41 TPC_CMD_NUMBER_FORMAT2_3:
{0,6,0,0,0,0,0,0},// 40 CSI_REQUEST:
{0,6,0,0,0,0,0,0},// 42 CSI_REQUEST:
{0,8,0,8,0,0,0,0},// 41 CBGTI: 0, 2, 4, 6, or 8 bits determined by higher layer parameter maxCodeBlockGroupsPerTransportBlock for the PDSCH
{0,8,0,8,0,0,0,0},// 43 CBGTI: 0, 2, 4, 6, or 8 bits determined by higher layer parameter maxCodeBlockGroupsPerTransportBlock for the PDSCH
{0,0,0,1,0,0,0,0},// 42 CBGFI: 0 or 1 bit determined by higher layer parameter codeBlockGroupFlushIndicator
{0,0,0,1,0,0,0,0},// 44 CBGFI: 0 or 1 bit determined by higher layer parameter codeBlockGroupFlushIndicator
{0,2,0,0,0,0,0,0},// 43 PTRS_DMRS:
{0,2,0,0,0,0,0,0},// 45 PTRS_DMRS:
{0,2,0,0,0,0,0,0},// 44 BETA_OFFSET_IND:
{0,2,0,0,0,0,0,0},// 46 BETA_OFFSET_IND:
{0,1,0,1,0,0,0,0},// 45 DMRS_SEQ_INI: 1 bit if the cell has two ULs and the number of bits for DCI format 1_0 before padding
{0,1,0,1,0,0,0,0},// 47 DMRS_SEQ_INI: 1 bit if the cell has two ULs and the number of bits for DCI format 1_0 before padding
//is larger than the number of bits for DCI format 0_0 before padding; 0 bit otherwise
// is larger than the number of bits for DCI format 0_0 before padding; 0 bit otherwise
{0,0,0,0,0,0,0,0},// 46 SUL_IND_0_0:
{0,1,0,0,0,0,0,0},// 48 UL_SCH_IND: value of "1" indicates UL-SCH shall be transmitted on the PUSCH and a value of "0" indicates UL-SCH shall not be transmitted on the PUSCH
{0,0,0,0,0,0,0,0}// 47 PADDING: (Note 2) If DCI format 0_0 is monitored in common search space
{0,0,0,0,0,0,0,0},// 49 PADDING_NR_DCI:
// (NOTE 2) If DCI format 0_0 is monitored in common search space
// and if the number of information bits in the DCI format 0_0 prior to padding
// and if the number of information bits in the DCI format 0_0 prior to padding
// is less than the payload size of the DCI format 1_0 monitored in common search space
// is less than the payload size of the DCI format 1_0 monitored in common search space
// zeros shall be appended to the DCI format 0_0
// zeros shall be appended to the DCI format 0_0
// until the payload size equals that of the DCI format 1_0
// until the payload size equals that of the DCI format 1_0
{0,0,0,0,0,0,0,0},// 50 SUL_IND_0_0:
{0,0,0,0,0,0,0,0},// 51 RA_PREAMBLE_INDEX (random access procedure initiated by a PDCCH order not implemented, FIXME!!!)
{0,0,0,0,0,0,0,0},// 52 SUL_IND_1_0 (random access procedure initiated by a PDCCH order not implemented, FIXME!!!)
{0,0,0,0,0,0,0,0},// 53 SS_PBCH_INDEX (random access procedure initiated by a PDCCH order not implemented, FIXME!!!)
{0,0,0,0,0,0,0,0},// 54 PRACH_MASK_INDEX (random access procedure initiated by a PDCCH order not implemented, FIXME!!!)
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for common searchSpaces with format css_dci_format=%d, format1_0_size_bits=%d, format1_0_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for common searchSpaces with format css_dci_format=%d, format_0_0_1_0_size_bits=%d, format_0_0_1_0_size_bytes=%d\n",
format_0_0_1_0_size_bits=nr_dci_format_size(crc_scrambled_,16,n_RB_ULBWP,n_RB_DLBWP,dci_fields_sizes);// after decoding dci successfully we recalculate dci pdu size with correct crc scrambled to get the right field sizes
format_0_0_1_0_size_bits=nr_dci_format_size(crc_scrambled_,16,n_RB_ULBWP,n_RB_DLBWP,dci_fields_sizes);// after decoding dci successfully we recalculate dci pdu size with correct crc scrambled to get the right field sizes
format_0_0_1_0_size_bits=nr_dci_format_size(crc_scrambled_,16,n_RB_ULBWP,n_RB_DLBWP,dci_fields_sizes);// after decoding dci successfully we recalculate dci pdu size with correct crc scrambled to get the right field sizes
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for common searchSpaces with format css_dci_format=%d, format2_0_size_bits=%d, format2_0_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for common searchSpaces with format css_dci_format=%d, format2_0_size_bits=%d, format2_0_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for common searchSpaces with format css_dci_format=%d, format2_1_size_bits=%d, format2_1_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for common searchSpaces with format css_dci_format=%d, format2_1_size_bits=%d, format2_1_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for common searchSpaces with format css_dci_format=%d, format2_2_size_bits=%d, format2_2_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for common searchSpaces with format css_dci_format=%d, format2_2_size_bits=%d, format2_2_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for common searchSpaces with format css_dci_format=%d, format2_3_size_bits=%d, format2_3_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for common searchSpaces with format css_dci_format=%d, format2_3_size_bits=%d, format2_3_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for UE-specific searchSpaces with format uss_dci_format=%d, format0_0_size_bits=%d, format0_0_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for UE-specific searchSpaces with format uss_dci_format=%d, format_0_0_1_0_size_bits=%d, format_0_0_1_0_size_bytes=%d\n",
// blind decoding format0_0 for aggregation level 1. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
// blind decoding format0_0 for aggregation level 1. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
#ifdef NR_PDCCH_DCI_DEBUG
#ifdef NR_PDCCH_DCI_DEBUG
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> ue-Specific searchSpaces with format uss_dci_format=%d and aggregation level 1, format0_0_size_bits=%d, format0_0_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> ue-Specific searchSpaces with format uss_dci_format=%d and aggregation level 1, format_0_0_1_0_size_bits=%d, format_0_0_1_0_size_bytes=%d\n",
// blind decoding format0_0 for aggregation level 2. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
// blind decoding format0_0 for aggregation level 2. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
#ifdef NR_PDCCH_DCI_DEBUG
#ifdef NR_PDCCH_DCI_DEBUG
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> ue-Specific searchSpaces with format uss_dci_format=%d and aggregation level 2, format0_0_size_bits=%d, format0_0_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> ue-Specific searchSpaces with format uss_dci_format=%d and aggregation level 2, format_0_0_1_0_size_bits=%d, format_0_0_1_0_size_bytes=%d\n",
// blind decoding format0_0 for aggregation level 4. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
// blind decoding format0_0 for aggregation level 4. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
#ifdef NR_PDCCH_DCI_DEBUG
#ifdef NR_PDCCH_DCI_DEBUG
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> ue-Specific searchSpaces with format uss_dci_format=%d and aggregation level 4, format0_0_size_bits=%d, format0_0_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> ue-Specific searchSpaces with format uss_dci_format=%d and aggregation level 4, format_0_0_1_0_size_bits=%d, format_0_0_1_0_size_bytes=%d\n",
// blind decoding format0_0 for aggregation level 8. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
// blind decoding format0_0 for aggregation level 8. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
#ifdef NR_PDCCH_DCI_DEBUG
#ifdef NR_PDCCH_DCI_DEBUG
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> ue-Specific searchSpaces with format uss_dci_format=%d and aggregation level 8, format0_0_size_bits=%d, format0_0_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> ue-Specific searchSpaces with format uss_dci_format=%d and aggregation level 8, format_0_0_1_0_size_bits=%d, format_0_0_1_0_size_bytes=%d\n",
// blind decoding format0_0 for aggregation level 16. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
// blind decoding format0_0 for aggregation level 16. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
#ifdef NR_PDCCH_DCI_DEBUG
#ifdef NR_PDCCH_DCI_DEBUG
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> ue-Specific searchSpaces with format uss_dci_format=%d and aggregation level 16, format0_0_size_bits=%d, format0_0_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> ue-Specific searchSpaces with format uss_dci_format=%d and aggregation level 16, format_0_0_1_0_size_bits=%d, format_0_0_1_0_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for UE-specific searchSpaces with format uss_dci_format=%d, format1_0_size_bits=%d, format1_0_size_bytes=%d\n",
// blind decoding format1_0 for aggregation level 1. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
#ifdef NR_PDCCH_DCI_DEBUG
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> ue-Specific searchSpaces with format uss_dci_format=%d and aggregation level 1, format1_0_size_bits=%d, format1_0_size_bytes=%d\n",
// blind decoding format1_0 for aggregation level 2. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
#ifdef NR_PDCCH_DCI_DEBUG
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> ue-Specific searchSpaces with format uss_dci_format=%d and aggregation level 2, format1_0_size_bits=%d, format1_0_size_bytes=%d\n",
// blind decoding format1_0 for aggregation level 4. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
#ifdef NR_PDCCH_DCI_DEBUG
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> ue-Specific searchSpaces with format uss_dci_format=%d and aggregation level 4, format1_0_size_bits=%d, format1_0_size_bytes=%d\n",
// blind decoding format1_0 for aggregation level 8. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
#ifdef NR_PDCCH_DCI_DEBUG
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> ue-Specific searchSpaces with format uss_dci_format=%d and aggregation level 8, format1_0_size_bits=%d, format1_0_size_bytes=%d\n",
// blind decoding format1_0 for aggregation level 16. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
if(dci_cnt!=old_dci_cnt){
#ifdef NR_PDCCH_DCI_DEBUG
old_dci_cnt=dci_cnt;
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> ue-Specific searchSpaces with format uss_dci_format=%d and aggregation level 16, format1_0_size_bits=%d, format1_0_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for UE-specific searchSpaces with format uss_dci_format=%d, format0_1_size_bits=%d, format0_1_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for UE-specific searchSpaces with format uss_dci_format=%d, format0_1_size_bits=%d, format0_1_size_bytes=%d\n",
// blind decoding format0_1 for aggregation level 16. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
// blind decoding format0_1 for aggregation level 16. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for UE-specific searchSpaces with format uss_dci_format=%d, format1_1_size_bits=%d, format1_1_size_bytes=%d\n",
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> calculating dci format size for UE-specific searchSpaces with format uss_dci_format=%d, format1_1_size_bits=%d, format1_1_size_bytes=%d\n",
// blind decoding format1_1 for aggregation level 4. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
// blind decoding format1_1 for aggregation level 4. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
// blind decoding format1_1 for aggregation level 8. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
// blind decoding format1_1 for aggregation level 8. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
// blind decoding format1_1 for aggregation level 16. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
// blind decoding format1_1 for aggregation level 16. The number of candidates (nrofCandidates) will be calculated in function nr_dci_decoding_procedure0
}*/
}
}
}
#ifdef NR_PDCCH_DCI_DEBUG
printf("\t<-NR_PDCCH_DCI_DEBUG (nr_dci_decoding_procedure)-> at the end dci_cnt=%d \n",dci_cnt);
uint8_tslot_format_ind;// 3 SLOT_FORMAT_IND: size of DCI format 2_0 is configurable by higher layers up to 128 bits, according to Subclause 11.1.1 of [5, TS 38.213]
uint8_tslot_format_ind;// 3 SLOT_FORMAT_IND: size of DCI format 2_0 is configurable by higher layers up to 128 bits, according to Subclause 11.1.1 of [5, TS 38.213]
uint8_tpre_emption_ind;// 4 PRE_EMPTION_IND: size of DCI format 2_1 is configurable by higher layers up to 126 bits, according to Subclause 11.2 of [5, TS 38.213]. Each pre-emption indication is 14 bits
uint8_tpre_emption_ind;// 4 PRE_EMPTION_IND: size of DCI format 2_1 is configurable by higher layers up to 126 bits, according to Subclause 11.2 of [5, TS 38.213]. Each pre-emption indication is 14 bits
uint8_ttpc_cmd_number;// 5 TPC_CMD_NUMBER: The parameter xxx provided by higher layers determines the index to the TPC command number for an UL of a cell. Each TPC command number is 2 bits
uint8_ttpc_cmd_number;// 5 TPC_CMD_NUMBER: The parameter xxx provided by higher layers determines the index to the TPC command number for an UL of a cell. Each TPC command number is 2 bits
uint8_tblock_number;// 6 BLOCK_NUMBER: starting position of a block is determined by the parameter startingBitOfFormat2_3
uint8_tblock_number;// 6 BLOCK_NUMBER: starting position of a block is determined by the parameter startingBitOfFormat2_3
uint8_ttime_dom_resource_assignment;// 10 TIME_DOM_RESOURCE_ASSIGNMENT: 0, 1, 2, 3, or 4 bits as defined in Subclause 6.1.2.1 of [6, TS 38.214]. The bitwidth for this field is determined as log2(I) bits,
uint8_ttime_dom_resource_assignment;// 12 TIME_DOM_RESOURCE_ASSIGNMENT: 0, 1, 2, 3, or 4 bits as defined in Subclause 6.1.2.1 of [6, TS 38.214]. The bitwidth for this field is determined as log2(I) bits,
// where I the number of entries in the higher layer parameter pusch-AllocationList
// where I the number of entries in the higher layer parameter pusch-AllocationList
uint8_tvrb_to_prb_mapping;// 11 VRB_TO_PRB_MAPPING: 0 bit if only resource allocation type 0
uint8_tvrb_to_prb_mapping;// 13 VRB_TO_PRB_MAPPING: 0 bit if only resource allocation type 0
uint8_tprb_bundling_size_ind;// 12 PRB_BUNDLING_SIZE_IND:0 bit if the higher layer parameter PRB_bundling is not configured or is set to 'static', or 1 bit if the higher layer parameter PRB_bundling is set to 'dynamic' according to Subclause 5.1.2.3 of [6, TS 38.214]
uint8_tprb_bundling_size_ind;// 14 PRB_BUNDLING_SIZE_IND:0 bit if the higher layer parameter PRB_bundling is not configured or is set to 'static', or 1 bit if the higher layer parameter PRB_bundling is set to 'dynamic' according to Subclause 5.1.2.3 of [6, TS 38.214]
uint8_trate_matching_ind;// 13 RATE_MATCHING_IND: 0, 1, or 2 bits according to higher layer parameter rate-match-PDSCH-resource-set
uint8_trate_matching_ind;// 15 RATE_MATCHING_IND: 0, 1, or 2 bits according to higher layer parameter rate-match-PDSCH-resource-set
uint8_tzp_csi_rs_trigger;// 14 ZP_CSI_RS_TRIGGER:
uint8_tzp_csi_rs_trigger;// 16 ZP_CSI_RS_TRIGGER:
uint8_tfreq_hopping_flag;// 15 FREQ_HOPPING_FLAG: 0 bit if only resource allocation type 0
uint8_tfreq_hopping_flag;// 17 FREQ_HOPPING_FLAG: 0 bit if only resource allocation type 0
uint8_tdai;// 26 DAI: For format1_1: 4 if more than one serving cell are configured in the DL and the higher layer parameter HARQ-ACK-codebook=dynamic, where the 2 MSB bits are the counter DAI and the 2 LSB bits are the total DAI
uint8_tdai;// 28 DAI: For format1_1: 4 if more than one serving cell are configured in the DL and the higher layer parameter HARQ-ACK-codebook=dynamic, where the 2 MSB bits are the counter DAI and the 2 LSB bits are the total DAI
// 2 if one serving cell is configured in the DL and the higher layer parameter HARQ-ACK-codebook=dynamic, where the 2 bits are the counter DAI
// 2 if one serving cell is configured in the DL and the higher layer parameter HARQ-ACK-codebook=dynamic, where the 2 bits are the counter DAI
// 0 otherwise
// 0 otherwise
uint8_tfirst_dai;// 27 FIRST_DAI: (1 or 2 bits) 1 bit for semi-static HARQ-ACK
uint8_tfirst_dai;// 29 FIRST_DAI: (1 or 2 bits) 1 bit for semi-static HARQ-ACK
uint8_tsecond_dai;// 28 SECOND_DAI: (0 or 2 bits) 2 bits for dynamic HARQ-ACK codebook with two HARQ-ACK sub-codebooks
uint8_tsecond_dai;// 30 SECOND_DAI: (0 or 2 bits) 2 bits for dynamic HARQ-ACK codebook with two HARQ-ACK sub-codebooks
uint8_tcbgti;// 41 CBGTI: 0, 2, 4, 6, or 8 bits determined by higher layer parameter maxCodeBlockGroupsPerTransportBlock for the PDSCH
uint8_tcbgti;// 43 CBGTI: 0, 2, 4, 6, or 8 bits determined by higher layer parameter maxCodeBlockGroupsPerTransportBlock for the PDSCH
uint8_tcbgfi;// 42 CBGFI: 0 or 1 bit determined by higher layer parameter codeBlockGroupFlushIndicator
uint8_tcbgfi;// 44 CBGFI: 0 or 1 bit determined by higher layer parameter codeBlockGroupFlushIndicator
uint8_tptrs_dmrs;// 43 PTRS_DMRS:
uint8_tptrs_dmrs;// 45 PTRS_DMRS:
uint8_tbeta_offset_ind;// 44 BETA_OFFSET_IND:
uint8_tbeta_offset_ind;// 46 BETA_OFFSET_IND:
uint8_tdmrs_seq_ini;// 45 DMRS_SEQ_INI: 1 bit if the cell has two ULs and the number of bits for DCI format 1_0 before padding
uint8_tdmrs_seq_ini;// 47 DMRS_SEQ_INI: 1 bit if the cell has two ULs and the number of bits for DCI format 1_0 before padding
// is larger than the number of bits for DCI format 0_0 before padding; 0 bit otherwise
// is larger than the number of bits for DCI format 0_0 before padding; 0 bit otherwise
uint8_tsul_ind_0_0;// 46 SUL_IND_0_0:
uint8_tul_sch_ind;// 48 UL_SCH_IND: value of "1" indicates UL-SCH shall be transmitted on the PUSCH and a value of "0" indicates UL-SCH shall not be transmitted on the PUSCH
uint16_tpadding;// 47 PADDING: (Note 2) If DCI format 0_0 is monitored in common search space
uint16_tpadding_nr_dci;// 49 PADDING_NR_DCI: (Note 2) If DCI format 0_0 is monitored in common search space
// and if the number of information bits in the DCI format 0_0 prior to padding
// and if the number of information bits in the DCI format 0_0 prior to padding
// is less than the payload size of the DCI format 1_0 monitored in common search space
// is less than the payload size of the DCI format 1_0 monitored in common search space
// zeros shall be appended to the DCI format 0_0
// zeros shall be appended to the DCI format 0_0
// until the payload size equals that of the DCI format 1_0
// until the payload size equals that of the DCI format 1_0
@@ -3997,33 +3995,39 @@ int nr_extract_dci_info(PHY_VARS_NR_UE *ue,
...
@@ -3997,33 +3995,39 @@ int nr_extract_dci_info(PHY_VARS_NR_UE *ue,
*
*
* At the moment we have implemented:
* At the moment we have implemented:
* Format 0_0, that contains the following fields according to Specification 38.212 V15.1.1 Section 7.3.1
* Format 0_0, that contains the following fields according to Specification 38.212 V15.1.1 Section 7.3.1
* 2 IDENTIFIER_DCI_FORMATS:
* 0 IDENTIFIER_DCI_FORMATS:
* 8 FREQ_DOM_RESOURCE_ASSIGNMENT_UL: PUSCH hopping with resource allocation type 1 not considered
* 10 FREQ_DOM_RESOURCE_ASSIGNMENT_UL: PUSCH hopping with resource allocation type 1 not considered
* 10 TIME_DOM_RESOURCE_ASSIGNMENT: 0, 1, 2, 3, or 4 bits as defined in Subclause 6.1.2.1 of [6, TS 38.214]. The bitwidth for this field is determined as log2(I) bits,
* 12 TIME_DOM_RESOURCE_ASSIGNMENT: 0, 1, 2, 3, or 4 bits as defined in Subclause 6.1.2.1 of [6, TS 38.214]. The bitwidth for this field is determined as log2(I) bits,
* 15 FREQ_HOPPING_FLAG: 0 bit if only resource allocation type 0
* 17 FREQ_HOPPING_FLAG: 0 bit if only resource allocation type 0
* 22 MCS:
* 24 MCS:
* 23 NDI:
* 25 NDI:
* 24 RV:
* 26 RV:
* 25 HARQ_PROCESS_NUMBER:
* 27 HARQ_PROCESS_NUMBER:
* 29 TPC_PUSCH:
* 32 TPC_PUSCH:
* 46 SUL_IND_0_0:
* 49 PADDING_NR_DCI: (Note 2) If DCI format 0_0 is monitored in common search space
* 47 PADDING: (Note 2) If DCI format 0_0 is monitored in common search space
* 50 SUL_IND_0_0:
*
*
* Format 1_0, that contains the following fields
* Format 1_0, that contains the following fields
* 2 IDENTIFIER_DCI_FORMATS:
* 0 IDENTIFIER_DCI_FORMATS:
* 9 FREQ_DOM_RESOURCE_ASSIGNMENT_DL:
* 8 SHORT_MESSAGE_IND
* 10 TIME_DOM_RESOURCE_ASSIGNMENT: 0, 1, 2, 3, or 4 bits as defined in Subclause 5.1.2.1 of [6, TS 38.214]. The bitwidth for this field is determined as log2(I) bits,
* 9 SHORT_MESSAGES
* 11 VRB_TO_PRB_MAPPING: 0 bit if only resource allocation type 0
* 11 FREQ_DOM_RESOURCE_ASSIGNMENT_DL:
* 22 MCS:
* 12 TIME_DOM_RESOURCE_ASSIGNMENT: 0, 1, 2, 3, or 4 bits as defined in Subclause 5.1.2.1 of [6, TS 38.214]. The bitwidth for this field is determined as log2(I) bits,
* 23 NDI:
* 13 VRB_TO_PRB_MAPPING: 0 bit if only resource allocation type 0
* 24 RV:
* 24 MCS:
* 25 HARQ_PROCESS_NUMBER:
* 25 NDI:
* 26 DAI: For format1_1: 4 if more than one serving cell are configured in the DL and the higher layer parameter HARQ-ACK-codebook=dynamic, where the 2 MSB bits are the counter DAI and the 2 LSB bits are the total DAI
* 26 RV:
* 30 TPC_PUCCH:
* 27 HARQ_PROCESS_NUMBER:
* 31 PUCCH_RESOURCE_IND:
* 28 DAI_: For format1_1: 4 if more than one serving cell are configured in the DL and the higher layer parameter HARQ-ACK-codebook=dynamic, where the 2 MSB bits are the counter DAI and the 2 LSB bits are the total DAI
* 32 PDSCH_TO_HARQ_FEEDBACK_TIME_IND:
* 31 TB_SCALING
* 33 SHORT_MESSAGE_IND: 1 bit if crc scrambled with P-RNTI
* 33 TPC_PUCCH:
* 47 PADDING: (Note 2) If DCI format 0_0 is monitored in common search space
* 34 PUCCH_RESOURCE_IND:
* 35 PDSCH_TO_HARQ_FEEDBACK_TIME_IND:
* 51 RA_PREAMBLE_INDEX:
* 52 SUL_IND_1_0:
* 53 SS_PBCH_INDEX:
* 54 PRACH_MASK_INDEX:
* 55 RESERVED_NR_DCI
*
*
*/
*/
uint64_tpdu_bitmap=0xFFFFFFFFFFFFFFFF;
uint64_tpdu_bitmap=0xFFFFFFFFFFFFFFFF;
...
@@ -4031,12 +4035,13 @@ int nr_extract_dci_info(PHY_VARS_NR_UE *ue,
...
@@ -4031,12 +4035,13 @@ int nr_extract_dci_info(PHY_VARS_NR_UE *ue,
uint8_tdci_field=0;
uint8_tdci_field=0;
uint8_tsizes_count=0;
uint8_tsizes_count=0;
uint8_tleft_shift=0;
uint8_tleft_shift=0;
#ifdef NR_PDCCH_DCI_TOOLS_DEBUG
#ifdef NR_PDCCH_DCI_TOOLS_DEBUG
printf("\t\t<-NR_PDCCH_DCI_TOOLS_DEBUG (nr_extract_dci_info) -> Entering function nr_extract_dci_info() with dci_pdu=%llx with pdu_bitmap=%llx dci_length=%d\n",(*(uint64_t*)dci_pdu),pdu_bitmap,dci_length);
printf("\t\t<-NR_PDCCH_DCI_TOOLS_DEBUG (nr_extract_dci_info) -> Entering function nr_extract_dci_info() with dci_pdu=%llx with pdu_bitmap=%llx dci_length=%d\n",(*(uint64_t*)dci_pdu),pdu_bitmap,dci_length);
@@ -4045,12 +4050,13 @@ int nr_extract_dci_info(PHY_VARS_NR_UE *ue,
...
@@ -4045,12 +4050,13 @@ int nr_extract_dci_info(PHY_VARS_NR_UE *ue,
uint16_tstart_symbol;
uint16_tstart_symbol;
uint16_ttmp_symbol;
uint16_ttmp_symbol;
/*
/*
* Some dci fields need to be interpreted before the others.
* Some dci fields need to be interpreted before the others.
*/
*/
if(dci_fields_sizes[HARQ_PROCESS_NUMBER]!=0){// E.g: 25 HARQ_PROCESS_NUMBER (25 is the position in dci_fields_sizes array for field HARQ_PROCESS_NUMBER)
if(dci_fields_sizes[HARQ_PROCESS_NUMBER][dci_format-15]!=0){// E.g: 27 HARQ_PROCESS_NUMBER (27 is the position in dci_fields_sizes array for field HARQ_PROCESS_NUMBER)
case0:// 0 CARRIER_IND: (field defined for -,format0_1,-,format1_1,-,-,-,-)
caseIDENTIFIER_DCI_FORMATS:// 0 IDENTIFIER_DCI_FORMATS: (field defined for format0_0,format0_1,format1_0,format1_1,format2_0,format2_1,format2_2,format2_3)
// if format 0_0: The value of this bit field is always set to 0, indicating an UL DCI format (TS38.212 Section 7.3.1.1.1)
// if format 1_0: The value of this bit field is always set to 1, indicating a DL DCI format (TS38.212 Section 7.3.1.2.1)
case4:// 4 PRE_EMPTION_IND: (field defined for -,-,-,-,-,format2_1,-,-)
casePRE_EMPTION_IND:// 4 PRE_EMPTION_IND: (field defined for -,-,-,-,-,format2_1,-,-)
// size of DCI format 2_1 is configurable by higher layers up to 126 bits, according to Subclause 11.2 of [5, TS 38.213]. Each pre-emption indication is 14 bits
// size of DCI format 2_1 is configurable by higher layers up to 126 bits, according to Subclause 11.2 of [5, TS 38.213]. Each pre-emption indication is 14 bits
// format 0_1 defined in TS 38.211 Section 6.3.1.7
// format 0_1 defined in TS 38.211 Section 6.3.1.7
...
@@ -4271,31 +4304,31 @@ int nr_extract_dci_info(PHY_VARS_NR_UE *ue,
...
@@ -4271,31 +4304,31 @@ int nr_extract_dci_info(PHY_VARS_NR_UE *ue,
#endif
#endif
break;
break;
case12:// 12 PRB_BUNDLING_SIZE_IND: (field defined for -,-,-,format1_1,-,-,-,-)
casePRB_BUNDLING_SIZE_IND:// 14 PRB_BUNDLING_SIZE_IND: (field defined for -,-,-,format1_1,-,-,-,-)
// 0 bit if the higher layer parameter PRB_bundling is not configured or is set to 'static', or 1 bit if the higher layer parameter PRB_bundling is set to 'dynamic' according to Subclause 5.1.2.3 of [6, TS 38.214]
// 0 bit if the higher layer parameter PRB_bundling is not configured or is set to 'static', or 1 bit if the higher layer parameter PRB_bundling is set to 'dynamic' according to Subclause 5.1.2.3 of [6, TS 38.214]
case26:// 26 DAI: (field defined for -,-,format1_0,format1_1,-,-,-,-)
caseDAI_:// 28 DAI_: (field defined for -,-,format1_0,format1_1,-,-,-,-)
// For format1_0: 2 bits as defined in Subclause 9.1.3 at TS 38.213
// For format1_0: 2 bits as defined in Subclause 9.1.3 at TS 38.213
// For format1_1: 4 if more than one serving cell are configured in the DL and the higher layer parameter HARQ-ACK-codebook=dynamic, where the 2 MSB bits are the counter DAI and the 2 LSB bits are the total DAI
// For format1_1: 4 if more than one serving cell are configured in the DL and the higher layer parameter HARQ-ACK-codebook=dynamic, where the 2 MSB bits are the counter DAI and the 2 LSB bits are the total DAI
// 2 if one serving cell is configured in the DL and the higher layer parameter HARQ-ACK-codebook=dynamic, where the 2 bits are the counter DAI
// 2 if one serving cell is configured in the DL and the higher layer parameter HARQ-ACK-codebook=dynamic, where the 2 bits are the counter DAI
case45:// 45 DMRS_SEQ_INI: (field defined for -,format0_1,-,format1_1,-,-,-,-)
caseDMRS_SEQ_INI:// 47 DMRS_SEQ_INI: (field defined for -,format0_1,-,format1_1,-,-,-,-)
// 1 bit if the cell has two ULs and the number of bits for DCI format 1_0 before padding is larger than the number of bits for DCI format 0_0 before padding; 0 bit otherwise
// 1 bit if the cell has two ULs and the number of bits for DCI format 1_0 before padding is larger than the number of bits for DCI format 0_0 before padding; 0 bit otherwise
* Note only format0_0 and format1_0 are implemented
* Note only format0_0 and format1_0 are implemented
...
@@ -6738,14 +6812,16 @@ int nr_generate_ue_ul_dlsch_params_from_dci(PHY_VARS_NR_UE *ue,
...
@@ -6738,14 +6812,16 @@ int nr_generate_ue_ul_dlsch_params_from_dci(PHY_VARS_NR_UE *ue,
dlsch0=dlsch[0];
dlsch0=dlsch[0];
dlsch0->active=0;
dlsch0->active=0;
if(dci_fields_sizes[HARQ_PROCESS_NUMBER]!=0){// 25 HARQ_PROCESS_NUMBER (25 is the position in dci_fields_sizes array for field HARQ_PROCESS_NUMBER)
if(dci_fields_sizes[HARQ_PROCESS_NUMBER][dci_format-15]!=0){// 27 HARQ_PROCESS_NUMBER (27 is the position in dci_fields_sizes array for field HARQ_PROCESS_NUMBER)
printf("\t<-NR_PDCCH_DCI_TOOLS_DEBUG (nr_generate_ue_ul_dlsch_params_from_dci) -> Entering function nr_extract_dci_info(dci_format=%d) for PUSCH allocation\n",dci_format);
printf("\t<-NR_PDCCH_DCI_TOOLS_DEBUG (nr_generate_ue_ul_dlsch_params_from_dci) -> Entering function nr_extract_dci_info(dci_format=%d) \n",dci_format);
#endif
#endif
status=nr_extract_dci_info(ue,
status=nr_extract_dci_info(ue,
eNB_id,
eNB_id,
frame_type,
frame_type,
dci_length,
dci_length,
rnti,
dci_pdu,
dci_pdu,
&nr_dci_info_extracted,
&nr_dci_info_extracted,
dci_fields_sizes,
dci_fields_sizes,
...
@@ -6775,13 +6852,9 @@ int nr_generate_ue_ul_dlsch_params_from_dci(PHY_VARS_NR_UE *ue,
...
@@ -6775,13 +6852,9 @@ int nr_generate_ue_ul_dlsch_params_from_dci(PHY_VARS_NR_UE *ue,
// this table contains 48 (NBR_NR_DCI_FIELDS) elements for each dci field described in TS 38.212. Each element represents the size in bits for each dci field
// this table contains 56 (NBR_NR_DCI_FIELDS) elements for each dci field and format described in TS 38.212. Each element represents the size in bits for each dci field
@@ -3346,7 +3377,7 @@ int nr_ue_pdcch_procedures(uint8_t eNB_id,PHY_VARS_NR_UE *ue,UE_nr_rxtx_proc_t *
...
@@ -3346,7 +3377,7 @@ int nr_ue_pdcch_procedures(uint8_t eNB_id,PHY_VARS_NR_UE *ue,UE_nr_rxtx_proc_t *
if(i==NB_eNB_INST){
if(i==NB_eNB_INST){
LOG_E(PHY,"[UE %d] phy_procedures_lte_ue.c: FATAL : Could not find attached eNB for DCI emulation (Nid_cell %d)!!!!\n",ue->Mod_id,ue->frame_parms.Nid_cell);
LOG_E(PHY,"[UE %d] phy_procedures_lte_ue.c: FATAL : Could not find attached eNB for DCI emulation (Nid_cell %d)!!!!\n",ue->Mod_id,ue->frame_parms.Nid_cell);
//mac_xface->macphy_exit("Could not find attached eNB for DCI emulation");
mac_xface->macphy_exit("Could not find attached eNB for DCI emulation");
if((dci_alloc_rx[i].rnti==ue->pdcch_vars[ue->current_thread_id[nr_tti_rx]][eNB_id]->crnti)&&(dci_alloc_rx[i].format==format0_1)){// This format not implemented at a first time. FIXME
if((dci_alloc_rx[i].rnti==ue->pdcch_vars[ue->current_thread_id[nr_tti_rx]][eNB_id]->crnti)&&(dci_alloc_rx[i].format==format1_1)){// This format not implemented at a first time. FIXME
