Skip to content

O
OpenXG-RAN
Commit be2b9d41 authored by Rohit Gupta's avatar Rohit Gupta
Browse files
Options

Merge branch 'feature-38-bladerf' into develop

parents 771bab79 9ab92439
Expand all Show whitespace changes
Inline Side-by-side
Showing with 1045 additions and 152 deletions
openair1/PHY/LTE_TRANSPORT/initial_sync.c
View file @ be2b9d41
......@@ -336,7 +336,9 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
#else
#ifndef OAI_USRP
#ifndef OAI_BLADERF
phy_adjust_gain(phy_vars_ue,0);
#endif
#endif
#endif
......
openair1/PHY/LTE_TRANSPORT/print_stats.c
View file @ be2b9d41
......@@ -50,7 +50,7 @@
#endif
extern int mac_get_rrc_status(uint8_t Mod_id,uint8_t eNB_flag,uint8_t index);
#if defined(OAI_USRP) || defined(EXMIMO)
#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_BLADERF)
#include "common_lib.h"
extern openair0_config_t openair0_cfg[];
#endif
......@@ -97,10 +97,10 @@ int dump_ue_stats(PHY_VARS_UE *phy_vars_ue, char* buffer, int length, runmode_t
#ifdef EXMIMO
len += sprintf(&buffer[len], "[UE PROC] RX Gain %d dB (LNA %d, vga %d dB)\n",phy_vars_ue->rx_total_gain_dB, openair0_cfg[0].rxg_mode[0],(int)openair0_cfg[0].rx_gain[0]);
#endif
#ifdef OAI_USRP
#if defined(OAI_USRP) || defined(OAI_BLADERF)
len += sprintf(&buffer[len], "[UE PROC] RX Gain %d dB\n",phy_vars_ue->rx_total_gain_dB);
#endif
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF)
len += sprintf(&buffer[len], "[UE_PROC] Frequency offset %d Hz (%d), estimated carrier frequency %f Hz\n",phy_vars_ue->lte_ue_common_vars.freq_offset,openair_daq_vars.freq_offset,openair0_cfg[0].rx_freq[0]-phy_vars_ue->lte_ue_common_vars.freq_offset);
#endif
len += sprintf(&buffer[len], "[UE PROC] UE mode = %s (%d)\n",mode_string[phy_vars_ue->UE_mode[0]],phy_vars_ue->UE_mode[0]);
......
openair1/PHY/TOOLS/signal_energy.c
View file @ be2b9d41
......@@ -197,7 +197,7 @@ int32_t signal_energy(int32_t *input,uint32_t length)
for (i=0; i<length>>1; i++) {
tmpE = vqaddq_s32(tmpE,vshrq_n_s32(vmull_s16(*in,*in),shift));
tmpDC = vaddw_s16(tmpDC,vshr_n_s16(*in++,shift_DC));
//tmpDC = vaddw_s16(tmpDC,vshr_n_s16(*in++,shift_DC));
}
......
openair1/SCHED/phy_procedures_lte_ue.c
View file @ be2b9d41
......@@ -1553,7 +1553,9 @@ void lte_ue_measurement_procedures(uint16_t l, PHY_VARS_UE *phy_vars_ue,uint8_t
#else
#ifndef OAI_USRP
#ifndef OAI_BLADERF
phy_adjust_gain (phy_vars_ue,0);
#endif
#endif
#endif
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_GAIN_CONTROL, VCD_FUNCTION_OUT);
......
targets/ARCH/COMMON/common_lib.h
View file @ be2b9d41
......@@ -193,7 +193,7 @@ struct openair0_device_t {
func_type_t func_type;
/* RF frontend parameters set by application */
openair0_config_t openair0_cfg;
openair0_config_t *openair0_cfg;
/* Can be used by driver to hold internal structure*/
void *priv;
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.bladerfx40.conf 0 → 100644
View file @ be2b9d41
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 50;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 60;
rx_gain = 60;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -26;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -108;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.13.11";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf
View file @ be2b9d41
......@@ -17,7 +17,7 @@ eNBs =
mobile_country_code = "208";
mobile_network_code = "92";
mobile_network_code = "93";
////////// Physical parameters:
......@@ -35,8 +35,8 @@ eNBs =
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 20;
rx_gain = 20;
tx_gain = 60;
rx_gain = 120;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
......@@ -46,7 +46,7 @@ eNBs =
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -26;
pdsch_referenceSignalPower = -29;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
......@@ -132,7 +132,7 @@ eNBs =
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.13.11";
mme_ip_address = ( { ipv4 = "192.168.12.11";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -142,10 +142,10 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.212/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.212/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......
targets/RT/USER/lte-softmodem.c
View file @ be2b9d41
......@@ -951,7 +951,7 @@ void do_OFDM_mod_rt(int subframe,PHY_VARS_eNB *phy_vars_eNB)
((short*)&phy_vars_eNB->lte_eNB_common_vars.txdata[0][aa][tx_offset])[0]=
#ifdef EXMIMO
((short*)dummy_tx_b)[2*i]<<4;
#elif OAI_BLADRF
#elif OAI_BLADERF
((short*)dummy_tx_b)[2*i];
#else
((short*)dummy_tx_b)[2*i]<<4;
......@@ -959,7 +959,7 @@ void do_OFDM_mod_rt(int subframe,PHY_VARS_eNB *phy_vars_eNB)
((short*)&phy_vars_eNB->lte_eNB_common_vars.txdata[0][aa][tx_offset])[1]=
#ifdef EXMIMO
((short*)dummy_tx_b)[2*i+1]<<4;
#elif OAI_BLADRF
#elif OAI_BLADERF
((short*)dummy_tx_b)[2*i+1];
#else
((short*)dummy_tx_b)[2*i+1]<<4;
......@@ -1017,6 +1017,7 @@ static void* eNB_thread_tx( void* param )
eNB_proc_t *proc = (eNB_proc_t*)param;
FILE *tx_time_file;
char tx_time_name[101];
if (opp_enabled == 1) {
snprintf(tx_time_name, 100,"/tmp/%s_tx_time_thread_sf_%d", "eNB", proc->subframe);
tx_time_file = fopen(tx_time_name,"w");
......@@ -1156,7 +1157,20 @@ static void* eNB_thread_tx( void* param )
}
do_OFDM_mod_rt( proc->subframe_tx, PHY_vars_eNB_g[0][proc->CC_id] );
/*
short *txdata = (short*)&PHY_vars_eNB_g[0][proc->CC_id]->lte_eNB_common_vars.txdata[0][0][proc->subframe_tx*PHY_vars_eNB_g[0][proc->CC_id]->lte_frame_parms.samples_per_tti];
int i;
for (i=0;i<7680*2;i+=8) {
txdata[i] = 2047;
txdata[i+1] = 0;
txdata[i+2] = 0;
txdata[i+3] = 2047;
txdata[i+4] = -2047;
txdata[i+5] = 0;
txdata[i+6] = 0;
txdata[i+7] = -2047;
}
*/
if (pthread_mutex_lock(&proc->mutex_tx) != 0) {
LOG_E( PHY, "[SCHED][eNB] error locking mutex for eNB TX proc %d\n", proc->subframe );
exit_fun("nothing to add");
......@@ -1838,7 +1852,8 @@ static void* eNB_thread( void* arg )
rt_sleep_ns(1000000);
#endif
if ((tx_launched == 0) &&
if ((frame>50) &&
(tx_launched == 0) &&
(rx_pos >= (((2*hw_subframe)+1)*PHY_vars_eNB_g[0][0]->lte_frame_parms.samples_per_tti>>1))) {
tx_launched = 1;
......@@ -1907,7 +1922,7 @@ static void* eNB_thread( void* arg )
#else
int sf = hw_subframe;
#endif
if (frame>50) {
for (int CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
#ifdef EXMIMO
......@@ -1955,6 +1970,7 @@ static void* eNB_thread( void* arg )
}
}
}
}
#ifdef EXMIMO
slot++;
......@@ -2902,9 +2918,8 @@ int main( int argc, char **argv )
} else if (frame_parms[0]->N_RB_DL == 25) {
openair0_cfg[card].sample_rate=7.68e6;
openair0_cfg[card].samples_per_frame = 76800;
openair0_cfg[card].tx_bw = 5e6;
openair0_cfg[card].rx_bw = 5e6;
openair0_cfg[card].tx_bw = 2.5e6;
openair0_cfg[card].rx_bw = 2.5e6;
} else if (frame_parms[0]->N_RB_DL == 6) {
openair0_cfg[card].sample_rate=1.92e6;
openair0_cfg[card].samples_per_frame = 19200;
......@@ -2973,7 +2988,7 @@ int main( int argc, char **argv )
openair0_cfg[card].rx_gain[i] = PHY_vars_eNB_g[0][0]->rx_total_gain_eNB_dB;
}
else {
openair0_cfg[card].rx_gain[i] = PHY_vars_UE_g[0][0]->rx_total_gain_dB;// - USRP_GAIN_OFFSET; // calibrated for USRP B210 @ 2.6 GHz, 30.72 MS/s
openair0_cfg[card].rx_gain[i] = PHY_vars_UE_g[0][0]->rx_total_gain_dB;
}
#if 0 // UHD 3.8
......
targets/RT/USER/lte-ue.c
View file @ be2b9d41
......@@ -401,7 +401,7 @@ static void *UE_thread_synch(void *arg)
case pbch:
LOG_I(PHY,"[UE thread Synch] Running Initial Synch\n");
if (initial_sync( UE, UE->mode ) == 0) {
hw_slot_offset = (UE->rx_offset<<1) / UE->lte_frame_parms.samples_per_tti;
......@@ -521,10 +521,6 @@ static void *UE_thread_synch(void *arg)
for (i=0; i<openair0_cfg[card].rx_num_channels; i++) {
openair0_cfg[card].rx_freq[i] = downlink_frequency[card][i]+freq_offset;
openair0_cfg[card].tx_freq[i] = downlink_frequency[card][i]+uplink_frequency_offset[card][i]+freq_offset;
#ifdef OAI_USRP
openair0_cfg[card].rx_gain[i] = UE->rx_total_gain_dB;//-USRP_GAIN_OFFSET;
#ifndef EXMIMO
openair0.trx_set_freq_func(&openair0,&openair0_cfg[0],0);
......@@ -532,6 +528,12 @@ static void *UE_thread_synch(void *arg)
openair0_set_frequencies(&openair0,&openair0_cfg[0],0);
#endif
#ifdef OAI_USRP
openair0_cfg[card].rx_gain[i] = UE->rx_total_gain_dB;//-USRP_GAIN_OFFSET;
switch(UE->lte_frame_parms.N_RB_DL) {
case 6:
openair0_cfg[card].rx_gain[i] -= 12;
......@@ -1105,10 +1107,10 @@ void *UE_thread(void *arg)
for (int i=0; i<UE->lte_frame_parms.nb_antennas_rx; i++)
rxp[i] = (dummy_dump==0) ? (void*)&rxdata[i][rxpos] : (void*)dummy[i];
/*
if (dummy_dump == 0)
printf("writing %d samples to %d (first_rx %d)\n",spp - ((first_rx==1) ? rx_off_diff : 0),rxpos,first_rx);
*/
/* if (dummy_dump == 0)
printf("writing %d samples to %d (first_rx %d)\n",spp - ((first_rx==1) ? rx_off_diff : 0),rxpos,first_rx);*/
if (UE->mode != loop_through_memory) {
rxs = openair0.trx_read_func(&openair0,
&timestamp,
......@@ -1117,10 +1119,13 @@ void *UE_thread(void *arg)
UE->lte_frame_parms.nb_antennas_rx);
if (rxs != (spp- ((first_rx==1) ? rx_off_diff : 0))) {
printf("rx error: asked %d got %d ",spp - ((first_rx==1) ? rx_off_diff : 0),rxs);
if (UE->is_synchronized == 1) {
exit_fun("problem in rx");
return &UE_thread_retval;
}
}
}
if (rx_off_diff !=0)
LOG_D(PHY,"frame %d, rx_offset %d, rx_off_diff %d\n",UE->frame_rx,UE->rx_offset,rx_off_diff);
......@@ -1335,6 +1340,7 @@ void *UE_thread(void *arg)
#ifndef USRP_DEBUG
if (UE->mode != loop_through_memory) {
LOG_I(PHY,"Resynchronizing RX by %d samples\n",UE->rx_offset);
rxs = openair0.trx_read_func(&openair0,
&timestamp,
(void**)rxdata,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment