Updating conf files. DL messages from gNB working.

NR UE is ending early. LTE is not passing at all.
X2 interface is not working either.

ci-scripts/conf_files/nr-ue.nfapi.conf

+log_config = {
+  global_log_level                      ="info";
+  global_log_verbosity                  ="medium";
+  hw_log_level                          ="info";
+  hw_log_verbosity                      ="medium";
+  phy_log_level                         ="info";
+  phy_log_verbosity                     ="medium";
+  mac_log_level                         ="info";
+  mac_log_verbosity                     ="medium";
+  rlc_log_level                         ="info";
+  rlc_log_verbosity                     ="medium";
+  pdcp_log_level                        ="info";
+  pdcp_log_verbosity                    ="medium";
+  rrc_log_level                         ="info";
+  rrc_log_verbosity                     ="full";
+};
+
+
+L1s = (
+        {
+	num_cc = 1;
+	tr_n_preference = "nfapi";
+	local_n_if_name  = "lo:";
+	remote_n_address = "127.0.0.2";
+	local_n_address  = "127.0.0.1";
+	local_n_portc    = 50600;
+	remote_n_portc   = 50601;
+	local_n_portd    = 50610;
+	remote_n_portd   = 50611;
+        }  
+);
+
+RUs = (
+    {
+       local_rf       = "yes"
+       nb_tx          = 1
+       nb_rx          = 1
+       att_tx         = 90
+       att_rx         = 0;
+       bands          = [7,38,42,43];
+       max_pdschReferenceSignalPower = -27;
+       max_rxgain                    = 125;
+    }
+);

ci-scripts/conf_files/rcc.band7.tm1.nfapi.conf

@@ -183,7 +183,7 @@ eNBs =
     enable_measurement_reports = "no";
 
     ///X2
-    enable_x2 = "no";
+    enable_x2 = "yes";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
     t_dc_prep         = 1000;      /* unit: millisecond */
@@ -191,12 +191,12 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "ens3";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
-        ENB_INTERFACE_NAME_FOR_S1U               = "ens3";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "lo";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "127.0.0.1";
+        ENB_INTERFACE_NAME_FOR_S1U               = "lo";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "127.0.0.1";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "127.0.0.1";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
         
     };

common/utils/LOG/log.h

@@ -416,7 +416,7 @@ int32_t write_file_matlab(const char *fname, const char *vname, void *data, int
 // debugging macros
 #define LOG_F  LOG_I           /* because  LOG_F was originaly to dump a message or buffer but is also used as a regular level...., to dump use LOG_DUMPMSG */
 
-#define LOG_MINIMAL 0 /* 1 for minimal logging: E, W and A */
+#define LOG_MINIMAL 1 /* 1 for minimal logging: E, W and A */
 
 #if LOG_MINIMAL
 

targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band78.tm1.106PRB.nfapi.conf

@@ -232,7 +232,7 @@ gNBs =
                             }
                           );
     ///X2
-    enable_x2 = "no";
+    enable_x2 = "yes";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
     t_dc_prep         = 1000;      /* unit: millisecond */
@@ -248,9 +248,9 @@ gNBs =
     {   # All of these have to be IP addr of gNB
                 # if in CORE container, make it 172.16.0.X
                 # if not launched in CORE, can set to lo (127.0.0.2)
-        GNB_INTERFACE_NAME_FOR_S1_MME            = "lo";
+        GNB_INTERFACE_NAME_FOR_S1_MME            = "lo:";
         GNB_IPV4_ADDRESS_FOR_S1_MME              = "127.0.0.2";
-        GNB_INTERFACE_NAME_FOR_S1U               = "lo";
+        GNB_INTERFACE_NAME_FOR_S1U               = "lo:";
         GNB_IPV4_ADDRESS_FOR_S1U                 = "127.0.0.2";
         GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
         GNB_IPV4_ADDRESS_FOR_X2C                 = "127.0.0.2";