Skip to content

O
OpenXG-SMF
Commit 40aa0d26 authored by gauthier's avatar gauthier
Browse files
Options

Config files

parent b3f671d5
Show whitespace changes
Inline Side-by-side
Showing with 182 additions and 0 deletions
etc/spgw_c.conf 0 → 100644
View file @ 40aa0d26
################################################################################
# Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The OpenAirInterface Software Alliance licenses this file to You under
# the OAI Public License, Version 1.1 (the "License"); you may not use this file
# except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.openairinterface.org/?page_id=698
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#-------------------------------------------------------------------------------
# For more information about the OpenAirInterface (OAI) Software Alliance:
# contact@openairinterface.org
################################################################################
S-GW =
{
INSTANCE = @INSTANCE@; # 0 is the default
PID_DIRECTORY = "@PID_DIRECTORY@"; # /var/run is the default
INTERFACES :
{
S11_CP :
{
# S-GW binded interface for S11 communication (GTPV2-C), if none selected the ITTI message interface is used
INTERFACE_NAME = "@SGW_INTERFACE_NAME_FOR_S11@"; # STRING, interface name, YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read"; # STRING, CIDR or read to let app read interface configured IP address, YOUR NETWORK CONFIG HERE
PORT = 2123; # INTEGER, port number, PREFER NOT CHANGE UNLESS YOU KNOW WHAT YOU ARE DOING
};
S5_S8_CP :
{
# S-GW binded interface for S5 or S8 communication
INTERFACE_NAME = "@SGW_INTERFACE_NAME_FOR_S5_S8_CP@"; # STRING, interface name
IPV4_ADDRESS = "read"; # STRING, CIDR or read to let app read interface configured IP address
PORT = 2123;
};
};
};
P-GW =
{
INSTANCE = @INSTANCE@; # 0 is the default
PID_DIRECTORY = "@PID_DIRECTORY@"; # /var/run is the default
INTERFACES :
{
S5_S8_CP :
{
# P-GW binded interface for S5 or S8 communication
INTERFACE_NAME = "@PGW_INTERFACE_NAME_FOR_S5_S8_CP@"; # STRING, interface name
IPV4_ADDRESS = "read"; # STRING, CIDR or read to let app read interface configured IP address
PORT = 2123;
};
SX :
{
# P-GW binded interface for SX communication
INTERFACE_NAME = "@PGW_INTERFACE_NAME_FOR_SX@"; # STRING, interface name
IPV4_ADDRESS = "read"; # STRING, CIDR or read to let app read interface configured IP address
PORT = 8805;
};
};
# Pool of UE assigned IP addresses
# Do not make IP pools overlap
# first IPv4 address X.Y.Z.1 is reserved for GTP network device on SPGW
# Normally no more than 96 pools allowed, but for non OVS GTP solution, only one pool allowed (TODO).
IP_ADDRESS_POOL :
{
ARP_UE = "@ARP_UE@"; # String, {"no", "linux", 'oai'}, respond to incoming ARP for UE IP addresses on SGi interface
# 'linux' use arp executable (comes with your linux distribution)
# 'oai' can only be used with OVS
IPV4_LIST = (
{RANGE = "12.1.1.2 - 12.1.1.128";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
{RANGE = "12.1.1.129 - 12.1.1.224";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
{RANGE = "192.169.0.2 - 192.169.255.253";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
{RANGE = "192.170.0.2 - 192.170.255.253";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
{RANGE = "192.171.0.2 - 192.171.255.253";} # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
);
IPV6_LIST = (
{PREFIX = "2001:1:2::/64";}, # STRING, IPv6 prefix, YOUR NETWORK CONFIG HERE.
{PREFIX = "3001:1:2::/64";}, # STRING, IPv6 prefix, YOUR NETWORK CONFIG HERE.
{PREFIX = "4001:1:2::/64";} # STRING, IPv6 prefix, YOUR NETWORK CONFIG HERE.
);
};
APN_LIST = (
# IPV4_POOL, IPV6_POOL are index in IPV4_LIST, IPV6_LIST, PDN_TYPE choice in {IPv4, IPv6, IPv4v6}
{APN_NI = "default"; PDN_TYPE = "IPv4"; IPV4_POOL = 0; IPV6_POOL = -1; SNAT = "no"},
{APN_NI = "apn1"; PDN_TYPE = "IPv4"; IPV4_POOL = 1; IPV6_POOL = -1; SNAT = "no"},
{APN_NI = "apn2"; PDN_TYPE = "IPv4"; IPV4_POOL = 2; IPV6_POOL = -1; SNAT = "no"},
{APN_NI = "apn3"; PDN_TYPE = "IPv4"; IPV4_POOL = 3; IPV6_POOL = -1; SNAT = "no"},
{APN_NI = "apn2"; PDN_TYPE = "IPv4"; IPV4_POOL = 4; IPV6_POOL = -1; SNAT = "no"}
);
# DNS address communicated to UEs
DEFAULT_DNS_IPV4_ADDRESS = "@DEFAULT_DNS_IPV4_ADDRESS@"; # YOUR NETWORK CONFIG HERE
DEFAULT_DNS_SEC_IPV4_ADDRESS = "@DEFAULT_DNS_SEC_IPV4_ADDRESS@"; # YOUR NETWORK CONFIG HERE
DEFAULT_DNS_IPV6_ADDRESS = "2001:4860:4860::8888"; # FFU
DEFAULT_DNS_SEC_IPV6_ADDRESS = "2001:4860:4860::8844"; # FFU
# Non standard feature, normally should be set to "no", but you may need to set to yes for UE that do not explicitly request a PDN address through NAS signalling
FORCE_PUSH_PROTOCOL_CONFIGURATION_OPTIONS = "no"; # STRING, {"yes", "no"}.
PCEF :
{
# Waiting for HSS APN-AMBR IE ...
APN_AMBR_UL = 500000; # Maximum UL bandwidth that can be used by non guaranteed bit rate traffic in Kbits/seconds.
APN_AMBR_DL = 500000; # Maximum DL bandwidth that can be used by non guaranteed bit rate traffic in Kbits/seconds.
};
};
etc/spgw_u.conf 0 → 100644
View file @ 40aa0d26
################################################################################
# Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The OpenAirInterface Software Alliance licenses this file to You under
# the OAI Public License, Version 1.1 (the "License"); you may not use this file
# except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.openairinterface.org/?page_id=698
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#-------------------------------------------------------------------------------
# For more information about the OpenAirInterface (OAI) Software Alliance:
# contact@openairinterface.org
################################################################################
SPGW-U =
{
INSTANCE = @INSTANCE@; # 0 is the default
PID_DIRECTORY = "@PID_DIRECTORY@"; # /var/run is the default
INTERFACES :
{
S1U_S12_S4_UP :
{
# S-GW binded interface for S1-U communication (GTPV1-U) can be ethernet interface, virtual ethernet interface, we don't advise wireless interfaces
INTERFACE_NAME = "@SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP@"; # STRING, interface name, YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read"; # STRING, CIDR or read to let app read interface configured IP address
PORT = @SGW_UDP_PORT_FOR_S1U_S12_S4_UP@; # Default is 2152
CPU_ID_THREAD_LOOP_READ = 1;
};
SX :
{
# S/P-GW binded interface for SX communication
INTERFACE_NAME = "@SGW_INTERFACE_NAME_FOR_SX@"; # STRING, interface name
IPV4_ADDRESS = "read"; # STRING, CIDR or read to let app read interface configured IP address
PORT = 8805; # Default is 8805
};
SGI :
{
# No config to set, the software will set the SGi interface to the interface used for the default route.
INTERFACE_NAME = "@SGW_INTERFACE_NAME_FOR_SGI@"; # STRING, interface name or "default_gateway"
IPV4_ADDRESS = "read"; # STRING, CIDR or read to let app read interface configured IP address
CPU_ID_THREAD_LOOP_READ = 3;
};
};
PDN_NETWORK_LIST = (
{NETWORK_IPV4 = "12.1.1.0/24"; NETWORK_IPV6 = "2001:1:2::0/64"; SNAT = "yes";},
{NETWORK_IPV4 = "12.1.2.0/24"; SNAT = "no";},
{NETWORK_IPV4 = "192.169.0.0/24"; SNAT = "no";},
{NETWORK_IPV4 = "192.170.0.0/24"; SNAT = "no";},
{NETWORK_IPV4 = "192.171.0.0/24"; SNAT = "no";}
);
SPGW-C_LIST = (
{IPV4_ADDRESS="192.168.160.100" ;}
);
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment