Skip to content

O
OpenXG UE
Commit 54eb117b authored by rmagueta's avatar rmagueta
Browse files
Options

Merge remote-tracking branch 'origin/ci_sa_rfsim_test' into develop-NR_SA_F1AP_5GRECORDS

parents def567c5 5df4abf7
Show whitespace changes
Inline Side-by-side
Showing with 512 additions and 10 deletions
ci-scripts/conf_files/gnb.band78.sa.fr1.106PRB.usrpb210.conf 0 → 100644
View file @ 54eb117b
Active_gNBs = ( "gNB-Eurecom-DU");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "gNB-Eurecom-DU";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({
mcc = 222;
mnc = 01;
mnc_length = 2;
snssaiList = (
{
sst = 1;
sd = 0x1; // 0 false, else true
},
{
sst = 1;
sd = 0x112233; // 0 false, else true
}
);
});
nr_cellid = 12345678L;
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 12;
searchSpaceZero = 0;
}
);
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
absoluteFrequencySSB = 641280;
dl_frequencyBand = 78;
# this is 3600 MHz
dl_absoluteFrequencyPointA = 640008;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=27,L=48 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 12952; # 6366 12925 12956 28875 12952
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
#pdsch-ConfigCommon
#pdschTimeDomainAllocationList (up to 16 entries)
initialDLBWPk0_0 = 0; #for DL slot
initialDLBWPmappingType_0 = 0; #0=typeA,1=typeB
initialDLBWPstartSymbolAndLength_0 = 40; #this is SS=1,L=13
initialDLBWPk0_1 = 0; #for mixed slot
initialDLBWPmappingType_1 = 0;
initialDLBWPstartSymbolAndLength_1 = 57; #this is SS=1,L=5
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 12952;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
# pusch-ConfigCommon (up to 16 elements)
initialULBWPk2_0 = 6; # used for UL slot
initialULBWPmappingType_0 = 1
initialULBWPstartSymbolAndLength_0 = 41; # this is SS=0 L=13
initialULBWPk2_1 = 6; # used for mixed slot
initialULBWPmappingType_1 = 1;
initialULBWPstartSymbolAndLength_1 = 69; # this is SS=0 L=12
initialULBWPk2_2 = 7; # used for Msg.3 during RA
initialULBWPmappingType_2 = 1;
initialULBWPstartSymbolAndLength_2 = 52; # this is SS=10 L=4
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
amf_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_NG_AMF = "eth0";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "CI_GNB_IP_ADDR";
GNB_INTERFACE_NAME_FOR_NGU = "eth0";
GNB_IPV4_ADDRESS_FOR_NGU = "CI_GNB_IP_ADDR";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
pusch_proc_threads = 8;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
eNB_instances = [0];
#beamforming 1x4 matrix:
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
clock_src = "internal";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
rfsimulator :
{
serveraddr = "server";
serverport = "4043";
options = (); #("saviq"); or/and "chanmod"
modelname = "AWGN";
IQfile = "/tmp/rfsimulator.iqs";
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
ngap_log_level ="debug";
ngap_log_verbosity ="medium";
};
ci-scripts/reportTestLocally.sh
View file @ 54eb117b
...@@ -748,6 +748,82 @@ function report_test { ...@@ -748,6 +748,82 @@ function report_test {
echo " <th>Statistics</th>" >> ./test_simulator_results.html echo " <th>Statistics</th>" >> ./test_simulator_results.html
echo " </tr>" >> ./test_simulator_results.html echo " </tr>" >> ./test_simulator_results.html
#SA
EPC_CONFIGS=("noS1")
TRANS_MODES=("tdd")
FR_MODE=("SA")
BW_CASES=(106)
for CN_CONFIG in ${EPC_CONFIGS[@]}
do
for TMODE in ${TRANS_MODES[@]}
do
for BW in ${BW_CASES[@]}
do
echo " <tr bgcolor = \"#8FBC8F\" >" >> ./test_simulator_results.html
if [[ $CN_CONFIG =~ .*wS1.* ]]
then
echo " <td align = \"center\" colspan = 4 >Test with EPC (aka withS1): ${TMODE} -- ${BW}PRB -- ${FR_MODE}</td>" >> ./test_simulator_results.html
else
echo " <td align = \"center\" colspan = 4 >Test without EPC (aka noS1): ${TMODE} -- ${BW}PRB -- ${FR_MODE}</td>" >> ./test_simulator_results.html
fi
echo " </tr>" >> ./test_simulator_results.html
#SA test (--sa option)
SA_ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}prb_${CN_CONFIG}_gnb_sa_test.log
SA_UE_LOG=$ARCHIVES_LOC/${TMODE}_${BW}prb_${CN_CONFIG}_ue_sa_test.log
if [ -f $RA_ENB_LOG ] && [ -f $RA_UE_LOG ]
then
#get rid of full path
NAME_ENB=`echo $SA_ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"`
NAME_UE=`echo $SA_UE_LOG | sed -e "s#$ARCHIVES_LOC/##"`
echo " <tr>" >> ./test_simulator_results.html
echo " <td>$NAME_ENB --- $NAME_UE</td>" >> ./test_simulator_results.html
echo " <td>Check if SA proc succeeded</td>" >> ./test_simulator_results.html
RRC_CHECK=`egrep -c "Received rrcSetupComplete" $SA_ENB_LOG`
CBRA_CHECK=`egrep -c "Received Ack of RA-Msg4\. CBRA procedure succeeded" $SA_ENB_LOG`
SIB1_CHECK=`egrep -c "SIB1 decoded" $SA_UE_LOG`
if [ $RRC_CHECK -gt 0 ] && [ $CBRA_CHECK -gt 0 ] && [ $SIB1_CHECK -gt 0 ]
then
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
else
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
fi
echo " <td><pre>" >> ./test_simulator_results.html
if [ $RRC_CHECK -gt 0 ]
then
echo "<font color = \"blue\">- Received rrcSetupComplete OK</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- Received rrcSetupComplete KO</b></font>" >> ./test_simulator_results.html
fi
if [ $CBRA_CHECK -gt 0 ]
then
echo "<font color = \"blue\">- CBRA procedure succeeded OK</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- CBRA procedure succeeded KO</b></font>" >> ./test_simulator_results.html
fi
if [ $SIB1_CHECK -gt 0 ]
then
echo "<font color = \"blue\">- SIB1 decoded OK</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- SIB1 decoded KO</b></font>" >> ./test_simulator_results.html
fi
echo " </pre></td>" >> ./test_simulator_results.html
echo " </tr>" >> ./test_simulator_results.html
fi
done
done
done
EPC_CONFIGS=("noS1") EPC_CONFIGS=("noS1")
TRANS_MODES=("tdd") TRANS_MODES=("tdd")
FR_MODE=("FR2") FR_MODE=("FR2")
......
ci-scripts/runTestOnVM.sh
View file @ 54eb117b
...@@ -277,6 +277,46 @@ function check_ping_result { ...@@ -277,6 +277,46 @@ function check_ping_result {
} }
function check_sa_result {
local LOC_GNB_LOG=$1
local LOC_UE_LOG=$2
#if log files exist
if [ -f $LOC_GNB_LOG ] && [ -f $LOC_UE_LOG ]
then
#gNB SA test
#console check
echo "Checking gNB Log for SA success"
egrep "Received rrcSetupComplete" $1
egrep "Received Ack of RA-Msg4\. CBRA procedure succeeded" $1
#script check
local RRC_CHECK=`egrep -c "Received rrcSetupComplete" $1`
local CBRA_CHECK=`egrep -c "Received Ack of RA-Msg4\. CBRA procedure succeeded" $1`
#UE SA test
#console check
echo 'Checking UE Log for SA success'
egrep "SIB1 decoded" $2
#script check
local SIB1_CHECK=`egrep -c "SIB1 decoded" $2`
#generate status
if [ $RRC_CHECK -eq 0 ] || [ $CBRA_CHECK -eq 0 ] || [ $SIB1_CHECK -eq 0 ]
then
SA_STATUS=-1
echo "SA test FAILED, could not find the markers"
fi
#case where log files do not exist
else
echo "SA test log files not present"
SA_STATUS=-1
fi
}
function check_ra_result { function check_ra_result {
local LOC_GNB_LOG=$1 local LOC_GNB_LOG=$1
local LOC_UE_LOG=$2 local LOC_UE_LOG=$2
...@@ -1209,8 +1249,8 @@ function start_rf_sim_gnb { ...@@ -1209,8 +1249,8 @@ function start_rf_sim_gnb {
local LOC_CONF_FILE=$5 local LOC_CONF_FILE=$5
# 1 is with S1 and 0 without S1 aka noS1 # 1 is with S1 and 0 without S1 aka noS1
local LOC_S1_CONFIGURATION=$6 local LOC_S1_CONFIGURATION=$6
#LOC_RA_TEST=1 will run the RA test check #LOC_RA_SA_TEST=1 will run the RA test check ; =2 will run the SA test
local LOC_RA_TEST=$7 local LOC_RA_SA_TEST=$7
if [ -e rbconfig.raw ]; then rm -f rbconfig.raw; fi if [ -e rbconfig.raw ]; then rm -f rbconfig.raw; fi
if [ -e reconfig.raw ]; then rm -f reconfig.raw; fi if [ -e reconfig.raw ]; then rm -f reconfig.raw; fi
...@@ -1233,11 +1273,14 @@ function start_rf_sim_gnb { ...@@ -1233,11 +1273,14 @@ function start_rf_sim_gnb {
echo "sudo rm -f r*config.raw" >> $1 echo "sudo rm -f r*config.raw" >> $1
if [ $LOC_S1_CONFIGURATION -eq 0 ] if [ $LOC_S1_CONFIGURATION -eq 0 ]
then then
if [ $LOC_RA_TEST -eq 0 ] #no RA test => use --phy-test option if [ $LOC_RA_SA_TEST -eq 0 ] #no RA test => use --phy-test option
then then
echo "echo \"./nr-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --log_config.global_log_options level,nocolor --parallel-config PARALLEL_SINGLE_THREAD --noS1 --nokrnmod 1 --rfsim --phy-test --lowmem --noS1\" > ./my-nr-softmodem-run.sh " >> $1 echo "echo \"./nr-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --log_config.global_log_options level,nocolor --parallel-config PARALLEL_SINGLE_THREAD --noS1 --nokrnmod 1 --rfsim --phy-test --lowmem --noS1\" > ./my-nr-softmodem-run.sh " >> $1
else #RA test => use --do-ra option elif [ $LOC_RA_SA_TEST -eq 1 ] #RA test => use --do-ra option
then
echo "echo \"./nr-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --log_config.global_log_options level,nocolor --parallel-config PARALLEL_SINGLE_THREAD --rfsim --do-ra --lowmem --noS1\" > ./my-nr-softmodem-run.sh " >> $1 echo "echo \"./nr-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --log_config.global_log_options level,nocolor --parallel-config PARALLEL_SINGLE_THREAD --rfsim --do-ra --lowmem --noS1\" > ./my-nr-softmodem-run.sh " >> $1
else #SA test => use --sa option
echo "echo \"./nr-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --log_config.global_log_options level,nocolor --parallel-config PARALLEL_SINGLE_THREAD --rfsim --sa --lowmem \" > ./my-nr-softmodem-run.sh " >> $1
fi fi
fi fi
echo "chmod 775 ./my-nr-softmodem-run.sh" >> $1 echo "chmod 775 ./my-nr-softmodem-run.sh" >> $1
...@@ -1273,7 +1316,7 @@ function start_rf_sim_gnb { ...@@ -1273,7 +1316,7 @@ function start_rf_sim_gnb {
fi fi
# check noS1 config only outside RA test (as it does not support noS1) # check noS1 config only outside RA test (as it does not support noS1)
if [ $LOC_S1_CONFIGURATION -eq 0 ] && [ $LOC_RA_TEST -eq 0 ] if [ $LOC_S1_CONFIGURATION -eq 0 ] && [ $LOC_RA_SA_TEST -eq 0 ]
then then
echo "ifconfig oaitun_enb1 | egrep -c \"inet addr\"" > $1 echo "ifconfig oaitun_enb1 | egrep -c \"inet addr\"" > $1
# Checking oaitun_enb1 interface has now an IP address # Checking oaitun_enb1 interface has now an IP address
...@@ -1318,8 +1361,8 @@ function start_rf_sim_nr_ue { ...@@ -1318,8 +1361,8 @@ function start_rf_sim_nr_ue {
local LOC_FREQUENCY=$6 local LOC_FREQUENCY=$6
# 1 is with S1 and 0 without S1 aka noS1 # 1 is with S1 and 0 without S1 aka noS1
local LOC_S1_CONFIGURATION=$7 local LOC_S1_CONFIGURATION=$7
#LOC_RA_TEST=1 will run the RA test check #LOC_RA_SA_TEST=1 will run the RA test check ; =2 will run the SA test
local LOC_RA_TEST=$8 local LOC_RA_SA_TEST=$8
# Copy the RAW files from the gNB run # Copy the RAW files from the gNB run
scp -o StrictHostKeyChecking=no rbconfig.raw ubuntu@$LOC_NR_UE_VM_IP_ADDR:/home/ubuntu/tmp scp -o StrictHostKeyChecking=no rbconfig.raw ubuntu@$LOC_NR_UE_VM_IP_ADDR:/home/ubuntu/tmp
...@@ -1336,11 +1379,14 @@ function start_rf_sim_nr_ue { ...@@ -1336,11 +1379,14 @@ function start_rf_sim_nr_ue {
echo "cd /home/ubuntu/tmp/cmake_targets/ran_build/build/" >> $1 echo "cd /home/ubuntu/tmp/cmake_targets/ran_build/build/" >> $1
if [ $LOC_S1_CONFIGURATION -eq 0 ] if [ $LOC_S1_CONFIGURATION -eq 0 ]
then then
if [ $LOC_RA_TEST -eq 0 ] #no RA test => use --phy-test option if [ $LOC_RA_SA_TEST -eq 0 ] #no RA test => use --phy-test option
then then
echo "echo \"./nr-uesoftmodem --nokrnmod 1 --rfsim --phy-test --rrc_config_path /home/ubuntu/tmp/cmake_targets/ran_build/build/ --log_config.global_log_options level,nocolor --noS1\" > ./my-nr-softmodem-run.sh " >> $1 echo "echo \"./nr-uesoftmodem --nokrnmod 1 --rfsim --phy-test --rrc_config_path /home/ubuntu/tmp/cmake_targets/ran_build/build/ --log_config.global_log_options level,nocolor --noS1\" > ./my-nr-softmodem-run.sh " >> $1
else #RA test => use --do-ra option elif [ $LOC_RA_SA_TEST -eq 1 ] #RA test => use --do-ra option
then
echo "echo \"./nr-uesoftmodem --rfsim --do-ra --log_config.global_log_options level,nocolor --rrc_config_path /home/ubuntu/tmp/cmake_targets/ran_build/build/\" > ./my-nr-softmodem-run.sh " >> $1 echo "echo \"./nr-uesoftmodem --rfsim --do-ra --log_config.global_log_options level,nocolor --rrc_config_path /home/ubuntu/tmp/cmake_targets/ran_build/build/\" > ./my-nr-softmodem-run.sh " >> $1
else #SA test => use --sa option
echo "echo \"./nr-uesoftmodem -r 106 --numerology 1 --band 78 -C 3619200000 --rfsim --sa --log_config.global_log_options level,nocolor\" > ./my-nr-softmodem-run.sh " >> $1
fi fi
fi fi
echo "chmod 775 ./my-nr-softmodem-run.sh" >> $1 echo "chmod 775 ./my-nr-softmodem-run.sh" >> $1
...@@ -1375,7 +1421,7 @@ function start_rf_sim_nr_ue { ...@@ -1375,7 +1421,7 @@ function start_rf_sim_nr_ue {
echo "RF-SIM NR-UE is sync'ed w/ gNB" echo "RF-SIM NR-UE is sync'ed w/ gNB"
fi fi
# Checking oaitun_ue1 interface has now an IP address (only outside RA test) # Checking oaitun_ue1 interface has now an IP address (only outside RA test)
if [ $LOC_RA_TEST -eq 0 ] if [ $LOC_RA_SA_TEST -eq 0 ]
then then
i="0" i="0"
echo "ifconfig oaitun_ue1 | egrep -c \"inet addr\"" > $1 echo "ifconfig oaitun_ue1 | egrep -c \"inet addr\"" > $1
...@@ -2189,6 +2235,88 @@ function run_test_on_vm { ...@@ -2189,6 +2235,88 @@ function run_test_on_vm {
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]] if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]]
then then
echo "############################################################"
echo "SA TEST"
echo "############################################################"
#SA test, attention : has a different config file from the rest of the test
CN_CONFIG="noS1"
CONF_FILE=gnb.band78.sa.fr1.106PRB.usrpb210.conf
S1_NOS1_CFG=0
PRB=106
FREQUENCY=3510
if [ ! -d $ARCHIVES_LOC ]
then
mkdir --parents $ARCHIVES_LOC
fi
local try_cnt=0
NR_STATUS=0
######### start of SA TEST loop
while [ $try_cnt -lt 5 ] #5 because it hardly succeed within CI
do
SYNC_STATUS=0
SA_STATUS=0
rm -f $ARCHIVES_LOC/tdd_${PRB}prb_${CN_CONFIG}*sa_test.log
echo "############################################################"
echo "${CN_CONFIG} : Starting the gNB"
echo "############################################################"
CURRENT_GNB_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_gnb_sa_test.log
#last argument = 2 is to enable --sa for SA test
start_rf_sim_gnb $GNB_VM_CMDS "$GNB_VM_IP_ADDR" $CURRENT_GNB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG 2
echo "############################################################"
echo "${CN_CONFIG} : Starting the NR-UE"
echo "############################################################"
CURRENT_NR_UE_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ue_sa_test.log
#last argument = 2 is to enable --sa for SA test
start_rf_sim_nr_ue $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $GNB_VM_IP_ADDR $CURRENT_NR_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG 2
if [ $NR_UE_SYNC -eq 0 ]
then
echo "Problem w/ gNB and NR-UE not syncing"
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
SYNC_STATUS=-1
try_cnt=$((try_cnt+1))
continue
fi
echo "############################################################"
echo "${CN_CONFIG} : Terminate gNB/NR-UE simulators"
echo "############################################################"
sleep 20
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
#check SA markers in gNB and NR UE log files
echo "############################################################"
echo "${CN_CONFIG} : Checking SA on gNB / NR-UE"
echo "############################################################"
# Proper check to be done when SA test is working!
check_sa_result $ARCHIVES_LOC/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC/$CURRENT_NR_UE_LOG_FILE
if [ $SA_STATUS -ne 0 ]
then
echo "SA test NOT OK"
echo "try_cnt = " $try_cnt
try_cnt=$((try_cnt+1))
else
try_cnt=$((try_cnt+10))
fi
done
########### end SA test
sleep 30
echo "############################################################" echo "############################################################"
echo "RA TEST FR2" echo "RA TEST FR2"
echo "############################################################" echo "############################################################"
...@@ -2493,6 +2621,7 @@ function run_test_on_vm { ...@@ -2493,6 +2621,7 @@ function run_test_on_vm {
echo "Checking run status" echo "Checking run status"
echo "############################################################" echo "############################################################"
if [ $SA_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $RA_FR2_STATUS -ne 0 ]; then NR_STATUS=-1; fi if [ $RA_FR2_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $RA_STATUS -ne 0 ]; then NR_STATUS=-1; fi if [ $RA_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $SYNC_STATUS -ne 0 ]; then NR_STATUS=-1; fi if [ $SYNC_STATUS -ne 0 ]; then NR_STATUS=-1; fi
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment